QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Overview
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
The HPE 530SFP+ is a dual-port 10Gb Ethernet adapter featuring the next generation 57810S single-chip solution from QLogic in a
PCIe 2.0 compliant form factor designed for select HPE ProLiant Gen9, Gen8 and Gen7 ML/DL/SL servers.
Leveraging QLogic's market-proven architecture and software, the HPE 530SFP+ delivers full line-rate performance across all ports
with low power consumption.
The HPE 530SFP+ supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming
(bonding), Tunneling offloads (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames, PXE boot and virtualization features
such as SR-IOV, Network Partitioning, VMware NetQueue and Microsoft VMQ.
Support for HPE Sea of Sensors 3D Technology enhances server performance while reducing energy use and expense.
Models
HP Ethernet 10Gb 2-port 530SFP Adapter
Kit Contents
•
•
•
652503-B21
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Quick install card
Product warranty statement
Page 1
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Compatibility
Servers
ProLiant DL (rack-optimized):
• HPE ProLiant DL60 Gen9
• HPE ProLiant DL80 Gen9
• HPE ProLiant DL120 Gen9
• HPE ProLiant Dl160 Gen9
• HPE ProLiant DL180 Gen9
• HPE ProLiant DL360 Gen9
• HPE ProLiant DL380 Gen9
• HPE ProLiant DL160 Gen8
• HPE ProLiant DL360e Gen8
• HPE ProLiant DL360p Gen8
• HPE ProLiant DL380e Gen8
• HPE ProLiant DL380p Gen8
• HPE ProLiant DL385p Gen8
• HPE ProLiant DL560 Gen8
• HPE ProLiant DL580 Gen8
• HPE ProLiant DL580 G7
• HPE ProLiant DL585 G7
• HPE ProLiant DL980 G7
ProLiant ML (expansion-optimized):
• HPE ProLiant ML350 Gen9
• HPE ProLiant ML350e Gen8
• HPE ProLiant ML350p Gen8
• HPE ProLiant ML350e Gen8 v2
ProLiant SL (scalable line):
• HPE SL2500 Scalable System
• HPE ProLiant SL210t Gen8
• HPE ProLiant SL230s Gen8
• HPE ProLiant SL250s Gen8
• HPE ProLiant SL270s Gen8
• HPE ProLiant SL4540 Gen8
• HPE ProLiant SL4545 G7
NOTE: This is a list of supported servers. Some may be discontinued.
Page 2
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Standard Features
Product Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Industry-leading throughput and latency performance
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Improved small packet performance: Supports UEFI and legacy boot options and Tunnel offload
support (NVGRE, VxLAN)
Low profile design shipping with standard height and low-profile brackets
Optimized for virtual server environments with support for Network Partitioning (NPAR) and SingleRoot I/O Virtualization (SR-IOV)Active Health Systems support via FW (OCBB), I2C capable
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (OCSD)
Standard server operating system support
Standard NC series option kit warranty, support, services
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
IEEE 1588 (Time Synchronization)
Dual-port 10 Gigabit The HPE 530SFP+ adapter delivers 20 Gbps full duplex Ethernet transfer rate per port (40 Gbps per adapter),
Ethernet
providing the network performance needed to improve response times and alleviate bottlenecks that impact
Throughput
performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for high performance
computing, database clusters, and more.
Jumbo Frames
The HPE 530SFP+ adapter supports jumbo frames (also known as extended frames), permitting up to a 9K
byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a standard
1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and
greater CPU utilization. These attributes are particularly useful for database transfer and tape backup
operations.
TCP/IP Stateless
Offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.
The HPE 530SFP+ Adapter by QLogic offers TCP/IP stateless offloading capability.
MSI and MSI-X
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load
balancing interrupts between CPUs/cores. The HPE 530SFP+ Adapter by QLogic supports MSI and MSI-X.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 530SFP+
adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security
and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to
within the same VLAN domain also improves performance. The HPE 530SFP+ Adapter by QLogic provides
support for 802.1Q (VLAN).
Page 3
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Standard Features
Tunnel Offload
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN
andNVGRE. By offloading packet processing to adapters, customers can use overlay networking to increase
VM migration flexibility and network scale with minimal impact to performance. HPE Tunnel Offloading
increases I/O throughput, reduces CPU utilization, and lowers power consumption. NVGRE tunnel offload
supports Microsoft OS environments and VxLAN supports select VMware and Linux (RHEL and SUSE)
environments.
TOE
TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to
the adapter's processor, freeing server CPU cycles for other operations.
Single-Root I/O
Virtualization
Single-Root I/O Virtualization (SR-IOV) provides a mechanism to bypass the host system hypervisor in virtual
environments providing near metal performance and server efficiency. SR-IOV provides mechanism to create
multiple Virtual Functions (VFs) to share single PCIe resources. The device is capable of SR-IOV, and requires
Server BIOS support, controller firmware, and OS support.
Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
Checksum &
Segmentation
Offload
Normally the TCP Checksum is computed by the protocol stack. By selecting one of the "Checksum Offload"
parameters, the checksum can be computed by the adapter.
Segmentation Offload is technique for increasing outbound throughput of high-bandwidth network
connections by reducing CPU overhead. The technique is also called TCP segmentation offload (TSO) when
applied to TCP, or generic segmentation offload (GSO).
The HPE 530SFP+ Adapter by QLogic has Checksum and Segmentation Offload capabilities
IPv6
IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit
addressing.
The HPE 530SFP+ Adapter by QLogic supports IPv6
Receive Side Scaling RSS resolves the single-processor bottleneck by allowing the receive side network load from a network
(RSS)
adapter to be shared across multiple processors. RSS enables packet receive-processing to scale with the
number of available processors.
The HPE 530SFP+ Adapter by QLogic has RSS capabilities.
Time
synchronization
implementations
(PTP)
Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond
range, making it suitable for measurement and control systems.
The HPE 530SFP+ Adapter by QLogic supports Precision Time Protocol-ready (PTP).
Page 4
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Standard Features
Network Adapter
Teaming
The HPE 530SFP+ adapter support for NIC teaming helps IT administrators increase network fault tolerance
and increased network bandwidth, The team of adapters can work together as a single virtual adapter. The
HPE 530SFP+ provides support for several different types of teaming enabling IT administrators to optimize
availability, improve performance and help reduce costs.
Network
The HPE 530FLR-SFP+ supports Network Partitioning (NPAR)for ProLiant Gen8 and Gen9 rack servers.
Partitioning (NPAR) Allowing administrators to configure a 10Gb port as four separate partitions or physical functions. Each PCI
function is associated with a different virtual NIC. To the OS and the network, each physical function appears
as a separate NIC port.
Network Management
Management
Support
The HPE 530SFP+ adapter can be administered from HPE Systems Insight Manager (SIM). The adapters can
be managed individually or in teams, providing SNMP based statistics for reporting purposes. The HPE
530SFP+ adapter can also be managed by other applications with SNMP support.
Server Integration
The HPE 530SFP+ adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant
servers. Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full
suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems
Insight Manager that simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other venders and
provides users with a single point of contact for both their servers and their network adapters.
Configuration
Utilities
Each HPE 530SFP+ ships with a suite of operating system-tailored configuration utilities that allow the user to
enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft
Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows
environment allow for unattended OS installations.
LED Indicators
The colored LEDs on each port of the HPE 530SFP+ adapter indicate link status and link activity.
Preboot eXecution PXE allows the server to boot over the network and download software residing in the network.
Environment (PXE)
HPE Sea of Sensors Support for HPE's Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity 3D
heat - across the server. When temperatures get too high, sensors can kick on fans and make other
adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on at one
time to a new system where only one kicks on - the one in proximity of the area that started heating up - thus
reducing the amount of energy used for cooling.
VMware NetQueue VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network
and Microsoft
adapters in virtualized environments.
Page 5
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Standard Features
Virtual Machine
Queue (VMQ)
Windows Hyper-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQenabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an external virtual
machine network directly to virtual machines, which reduces the overhead of routing packets and copying
them from the management operating system to the virtual machine.
The HPE Ethernet 10Gb 2-port 530SFP+ Adapter by QLogic supports VMware NetQueue and Windows
Hyper-V VMQ.
Warranty
Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year,
limited warranty).
Minimum: One year limited warranty.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/index.aspx#.V4e3tPkrJhE
Page 6
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Service and Support
Service and Support HPE Technology Services
HPE Technology Services offers you technical consultants and support expertise to solve your most complex
infrastructure problems. We help keep your business running, boost availability, and avoid downtime.
Protect your business beyond warranty with HPE Care Pack Services
When you buy HPE Options, it's also a good time to think about what level of service you may need. HPE Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HPE Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industrystandard servers and software. You can choose the type and level of service that is most suitable for your
business needs. New to this portfolio is HPE Collaborative Support. If you are running business critical
environments, Hewlett Packard Enterprise offers Proactive Care or Critical Advantage. These services help
you deliver high levels of application availability through proactive service management and advanced
technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, Hewlett Packard Enterprise can work with you to tailor a service solution
for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product
Recommended
Services
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required a Hewlett Packard Enterprise Authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.1938120508
OR
3-Year HPE 24x7 4 hour Response, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to Hewlett Packard Enterprise. If
the problem is with HPE HW, the representative will arrive on site any time and day of the year to begin
hardware maintenance service within 4 hours of the service request being logged. In case, the issue is with
Hewlett Packard Enterprise or supported third-party software product and cannot be resolved by applying
known fixes, Hewlett Packard Enterprise will contact the third-party vendor and create a problem incident on
your behalf.
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=5981-9356EN
Page 7
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Service and Support
Related HPE Care Pack Services to enhance your HPE product experience
Related Services
3-Year HPE 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue end
to end until resolved, delivering a single point of contact for you
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.1
OR
3-Year HPE 6-hour Onsite Call-to-Repair, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return
the hardware in operating condition within 6 hours of the initial service request to the HPE Global Solution
Center, and basic software problem diagnosis, fault isolation, and resolution if available to Hewlett Packard
Enterprise. In case, the issue is with Hewlett Packard Enterprise or supported third-party software product and
cannot be resolved by applying known fixes, Hewlett Packard Enterprise will contact the third-party vendor
and create a problem incident on your behalf.
HPE Proactive Select Service
Provides a flexible way to purchase Hewlett Packard Enterprise best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months.
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=4AA3-8855ENW&search=4AA38855ENW
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04844073
HPE Support Center Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with Hewlett Packard Enterprise experts,
access support resources or collaborate with peers. Learn more https://www.hpe.com/us/en/support.html
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability.
Parts and materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part of this
service; standard warranty terms and conditions apply. Parts and components that have exceeded their
maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's
operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Page 8
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Service and Support
Warranty / Service For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified for the
Coverage
server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to
22" and tower UPS products; these items will be covered at the same service level and for the same coverage
period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been
exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction. It does not apply to any exchange of Disk or SSD/Flash
Drives that have not failed. SSD/Flash Drives that are specified by Hewlett Packard Enterprise as consumable
parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in
the manufacturer's operating manual or the technical data sheet are not eligible for the defective media
retention service feature option
For more
information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
https://www.hpe.com/us/en/servers
Page 9
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Related Options
Direct Attach Cable HP BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
NOTE: Direct Attach Cable (DAC) must be purchased separately for copper
environments.
487649-B21
487652-B21
487655-B21
537963-B21
Fiber Optic Modules HP BladeSystem c-Class 10Gb SFP+ SR Transceiver
HP BladeSystem c-Class 10Gb SFP+ LR Transceiver
HPE X132 10G SFP+ LC SR Transceiver
NOTE: Fiber transceivers and cables must be purchased separately for fiber-optic
environments.
455883-B21
455886-B21
J9150A
Fiber Optic Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
NOTE: Fiber transceivers and cables must be purchased separately for fiber-optic
environments.
NOTE: For additional information on 10Gb cable specifications go to:
AJ833A
AJ834A
AJ836A
AJ837A
AJ838A
AJ839A
Additional
Supported Cables
(Plug into
HPN5900)
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JD095C
JD096C
JD097C
JG081C
JC784C
JG329A
JG330A
JG331A
Additional
Supported Cables
(Plug into
HPN6600)
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9281B
J9283B
J9285B
Gigabit Server
Adapters
HP NC365T 4-port Ethernet Server Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
593722-B21
647594-B21
615732-B21
652497-B21
Page 10
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Related Options
10 Gigabit Server
Adapters
FlexibleLOM
Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
HP NC523SFP 10Gb 2-port Server Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 561T Adapter
HP Ethernet 10Gb 2-port 570SFP+ Adapter
593717-B21
614203-B21
656596-B21
665249-B21
716591-B21
718904-B21
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
Ethernet Adapters
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 366FLR Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP Ethernet 10Gb 2-port 570FLR-SFP+ Adapter
629135-B21
665240-B21
647581-B21
665243-B21
700699-B21
717491-B21
FlexFabric Adapters
HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
629138-B21
700759-B21
700751-B21
629142-B21
Page 11
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Related Options
General
Specifications
Power and
Environmental
Specifications
Network Processor
QLogic 57810S chipset
Data Rate
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical
bandwidth.
Bus Type
PCI-e 2.0 x8
Form Factor
Standard and low profile adapter compliant with the PCIe standard
IEEE Compliance
802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1Qbg,
802.1ax
Operating
Temperature
32° to 131° F (0° to 55° C)
Humidity
5% to 95% non-condensing
Power
9W maximum
Agency approvals
USA
FCC Part 15 Class A
Canada
ICES=--3, Issue 4
Japan
VCCI V3 (2010.04) Class A
International
EN55022:2006 + A1:2007 Class A,
EN55024:1998+A1:2011+A2; EN61000-3-2:2006,
EN61000-3-3:2008
Taiwan
BSMI, CNS13438 (2006) Class A
Australia/New Zealand
(AS/NZS):
EN55022:2006+A12007 class A
Korea
KN22 Class A, KN24
RoHS Compliance
Operating System
Support
6 of 6
Microsoft Windows Server 2008 SP2 and R2 w/SP1 (x86 and x64)
Microsoft Windows Server 2012, 2012 R2
Microsoft Windows Hyper-V 2008 R2 w/SP1, 2012, 2012 R2
Red Hat Enterprise Linux (RHEL) 5, 6 and 7
SUSE Linux Enterprise Server 11 and 12
Mware ESXi 5.x and 6.x
VMware vSphere 5.5
Citrix XenServer 6.x
Solaris 10 and 11
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
BladeSystem Server Linux matrix:
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/redhat_linux.aspx#.V4e8tP
krJD8
Environmentfriendly Products
End-of-life
Management and
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
Page 12
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Related Options
and Approach
Recycling
information, please go to: http://www.hpe.com/info/recycle To recycle your
product, please go to: http://www.hpe.com/info/recycle or contact your nearest
Hewlett Packard Enterprise sales office. Products returned to Hewlett Packard
Enterprise will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 13
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Summary of Changes
Date
22-Jul-2016
Version History
From Version 19 to 20
Action
Changed
Removed
19-Jun-2015
From Version 18 to 19
Changed
Removed
28-Nov-2014
From Version 17 to 18
Changed
10-Sep-2013
From Version 16 to 17
Changed
15-Mar-2013
From Version 15 to 16
Added
01-Mar-2013
19-Feb-2013
From Version 14 to 15
From Version 13 to 14
Changed
Changed
04-Jan-2013
From Version 12 to 13
Changed
04-Dec-2012
From Version 11 to 12
Changed
15-Nov-2012
24-Oct-2012
10-Oct-2012
09-Oct-2012
03-Oct-2012
28-Sep-2012
24-Sep-2012
20-Aug-2012
13-Jul-2012
25-Jun-2012
From Version 10 to 11
From Version 9 to 10
From Version 8 to 9
From Version 7 to 8
From Version 6 to 7
From Version 5 to 6
From Version 4 to 5
From Version 3 to 4
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Changed
Description of Change
QuickSpecs sections were updated.
Obsolete SKUs were deleted:
503746-B21.
Compatibility, Standard Features, Related Options sections
were updated.
Obsolete SKUs removed:
221691-B21, 221691-B22, 221691-B23, 221692-B21, 221692-B22,
221692-B23, 221692-B26, 221692-B27, 412648-B21, 435508B21, 394791-B21, 394793-B21, 538696-B21, 458492-B21,
468332-B21, 489892-B21, 581201-B21.
Overview, Compatibility, Standard Features and Technical
Specifications were updated
Compatibility, 10 Gigabit Server Adapters, and FlexibleLOM
Adapters were revised.
Technical Specifications: Added 802.3ae to the General
Specifications section.
Updated the Related Options section.
Updated Overview, Standard Features, Related Options and
Technical Specifications.
A description and SKU change was made in the Related
Options section.
Changes made in the Compatibility, Related Options and
Technical Specifications sections.
Change made in the Technical Specifications section only.
Changes made in the Related Options section.
Changes made in the Compatibility section.
Changes made in Compatibility section.
Changes were made in Related Options section.
Changes were made in Related Options section.
Changes were made in Compatibility section.
Changes were made in Compatibility section.
Changes were made in Related Options.
Changes were made in Technical Specifications.
Page 14
QuickSpecs
HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Summary of Changes
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04111517 - 14330 - Worldwide - V20 - 22-July-2016
Page 15