FORM MEASUREMENT
SURFTEST SJ-210
PORTABLE SKID SYSTEM FOR MEASURING SURFACE
ROUGHNESS IN THE PRODUCTION ENVIRONMENT
PRE1344(2)
PRE1344(2)SJ_210.indd 1
27.11.14 09:53
The concept
Easy to use
2.4-inch color graphic
LCD with backlightThe color LCD provides excellent readability and an intuitive display that's
easy to negotiate. The LCD also includes a backlight for improved visibility in dark environments.
Simple key layout
The Surftest SJ-210 can be operated easily using the keys on the front of the unit and under the
sliding cover.
Highly functional
Advanced data storage capabilities
Up to 10 measurement conditions and one measured profile can be stored in the internal
memory.
MicroSD-Card
An optional memory card can be used as an extended memory to store large quantities of
measured profiles and conditions.
Password protection
Access to each feature can be password-protected, which prevents unintended operations and
allows you to protect your settings.
Extensive analysis and display features
Complies with many industry standards
The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994,
JIS B0601-1982), VDA, ISO-1997, and ANSI.
Displays assessed profiles and graphical data
In addition to calculation results, the Surftest SJ-210 can display sectional calculation results and
assessed profiles, load curves, and amplitude distribution curves.
2
PRE1344(2)SJ_210.indd 2
27.11.14 09:53
SURFTEST
SURFTEST SJ-210 SJ-210
Display
• Color graphic LCD
• Large, 2.4-inch LCD
• Backlight
Operation
• Keys to change settings are located in the area under the
sliding cover
• The arrow keys support intuitive navigation
• Important functions are directly accessible
Drive unit
The drive unit can be separated from the display unit by using
a cable, allowing more fl exible measurement. The driver can
be separated and reattached in one simple step. There are
many different kinds of drivers and detectors available.
Languages
The display interface supports
16 languages.
Rechargeable NiMH Battery
The built-in high-capacity battery excels in a short charging
time and enables approx. 1000 measurements.
Connections
• Data can be transferred to and from a computer via the
high-speed USB interface.
• Large quantities of data can be stored on the optional
MicroSD card
3
PRE1344(2)SJ_210.indd 3
27.11.14 09:53
Powerful
Optimal functionality and versatility
The highly visible 2.4-inch color
graphic LCD with backlight lets you
see the screen easily even in dark
environments.
Advanced features
• The multilingual display interface supports 16 languages,
which can be freely switched.
• Access to features can be password-protected.
• A quick-charge, long-life battery is provided.
• Pass/fail results are displayed in
color.
Easy setting
• Assessed profiles, load
curves, and amplitude
distribution curves can be
displayed in addition to
calculation results. Assessed
profiles can also be zoomed
up and down.
• The display mode can be freely
switched between portrait and
landscape.
• Calculation results are displayed
in large characters.
Advanced data storage capabilities
• Up to 10 measurement conditions can be stored in the
internal memory. Conditions can be quickly read according
to the workpiece.
• An optional memory card can be used as an extended
memory to store large quantities of measured profi les and
conditions.
Displayed settings can be easily
changed by pressing the left and
right arrow keys under the sliding
cover. For example, these keys
can be used to switch the cutoff value(λc) and the number of
sampling lengths(N) on the measurement screen.
Setting parameters and
recalculating results
The required parameters can be
selected from the screen. The
sub-menu also lets you specify
detailed settings such as the
tolerance. After completing
measurement, the parameters
can be changed and calculation
can be executed again* using
the new parameters.
*May not be possible, depending on the measurement conditions.
Many interface options:
A USB interface is equipped as standard. The Surftest SJ-210 also provides
an RS-232C output, Digimatic output,
printer output, and footswitch input.
4
PRE1344(2)SJ_210.indd 4
27.11.14 09:53
Drive Units
Excellent flexibility
Capable of performing measurements in any orientation, including vertical and upside-down. Optional accessories, such as a
height gage adapter, allow measurements to be performed efficiently in various situations and setups.
Compact system with
inserted driver
Driver separate
Use in height measurement
device
Use for traverse measurement
Driver usable as insert or separately
The driver can be separated from the display unit and reattached in one easy step.
Different drivers expand the range of application
Carrying case
A convenient carrying case
is supplied as standard for
protecting the instrument in
the fi eld.
Standard drive unit
Popular standard drive unit
Retractable drive unit
The detector is in the retracted position at rest so it is
immune from damage when
inserted into a feature whose
profile cannot be easily seen,
such as a blind hole, etc.
Transverse tracing drive
unit
Best suited for measurement
of narrow, shrouded workpiece features such as crankshaft, EDM parts, etc.
5
PRE1344(2)SJ_210.indd 5
27.11.14 09:53
Specifications
Model No.
(Type of detector)
Order No.
mm
inch/mm
Measuring
range
X axis
Z axis
(Detector)
Range
Range / Resolution
Measuring speed
Measuring force / Stylus tip
Skid force
Applicable standards
Assessed profiles
Evaluation parameters
Analysis graphs
Filters
λc
λs
Cut off length
Sampling length
Number of Sampling lengths (×n)
LCD dimensions
Display languages
Calculation result display
Printing function
(Dedicated printer is required separately.)
External I/O
Customization
GO/NG judgment
Storage of measurement condition
Functions
Storage
Calibration
Power-saving function
Power supply
Size (W×D×H)
Display unit
Drive unit
Mass
Standard drive unit type
Retractable drive unit type
Transverse tracing drive unit type
SJ-210
SJ-210
SJ-210
SJ-210
SJ-210
SJ-210
(0.75mN type)
(4mN type)
(0.75mN type)
(4mN type)
(0.75mN type)
(4mN type)
178-560-01
178-560-02
178-562-01
178-562-02
178-564-01
178-564-02
178-561-01
178-561-02
178-563-01
178-563-02
178-565-01
178-565-02
17.5 mm
5.6 mm
360 µm (-200 µm to +160 µm)
360 µm / 0.02 µm, 100 µm / 0.006 µm, 25 µm / 0.002 µm
Measuring: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s Returning: 1 mm/s
0.75mN type: 0.75mN / 2 µmR 60° , 4 mN type: 4mN / 5µmR 90°
Less than 400mN
JIS ’82 / JIS ’94 / JIS ’01 / ISO ’97 / ANSI / VDA
Primary profile / Roughness profile / DF profile / Roughness profile-Motif
Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c),
Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize
Bearning area curve / Amplitude distribution curve
Gaussian , 2CR75 , PC75
0.08 , 0.25 , 0.8 , 2.5 mm
2.5 , 8 µm
0.08 , 0.25 , 0.8 , 2.5 mm
×1,×2,×3,×4,×5,×6,×7,×8,×9,×10, arbitrary
×1,×2,×3,×4,×5,×6,×7,×8,×9,×10,
length
arbitrary length (0.3 to 16.0mm: 0.01mm interval)
(0.3 to 5.6 mm: 0.01 mm interval)
36.7 × 48.9 mm
Japanese, English, German, French, Italian, Spanish, Portuguese, Korean,
Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian Turkish, Swedish, Dutch
Vertical display: 1 parameter / 3 parameter / trace to measurements
Horizontal display: 1 parameter / 4 parameter / trace to measurements (Horizontal display is invertable)
Measurement conditions / Calculation results / Calculation results for each sampling length /
Assessed profile / Bearing area curve / Amplitude distribution curve / Environment setting infomation
USB I/F, Digimatic Output, Printer Output, RS-232C I/F, Foot SW I/F
Desired parameters can be selected for calculation and display
By max value / 16 % / Standard deviation
Save the conditions at power OFF
Internal memory: Measurement condition (10 sets), Measured profile (1 set)
Memory card (Option): 500 measurement conditions, 10000 measured profiles, 500 display images
Text file (Measurement conditions / Measured profile / Assessed profile /
Bearing area curve / Amplitude distribution curve)
Auto-calibration with the entry of numerical value /
Average calibration with multiple measurement (Max.5 times) is available
Auto-sleep off function (10-600sec)
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
*Charging time: about 4 hours (may vary due to ambient temperature)
*Endurance: about 1000 measurements (differs slightly due to use conditions / environment)
52.1 × 65.8 ×160 mm
115 × 23 × 26 mm
About 500 g (Display unit + Drive unit + Standard detector)
Scope of delivery Surftest SJ-210 Standard- and R-Vorschub
Scope of delivery Surftest SJ-210 S-Vorschub
- Display unit
- Standard or R-driver
- Standard stylus tip
- Connecting cable for detached use of driver
- Calibration standard 178-601
- Plate for calibration standard
- Carrying bag
- Protective sheets (for display)
- AC adapter
- Operating instructions
- Quick reference
- Display unit
- S-driver
- Standard stylus tip for S-driver
- Connecting cable for detached use of driver
- Calibration standard 178-605
- Plate for calibration standard
- Carrying bag
- Protective sheets (for display)
- V-adapter
- Point-contact adapter
- AC adapter
- Operating instructions
- Quick reference
6
PRE1344(2)SJ_210.indd 6
27.11.14 09:53
Dimensions
Display unit
Drive unit stored inside display unit
214,1
174,1
160
40
POWER
DATA
START
STOP
PAGE
POWER
DATA
START
STOP
Sliding cover: Closed
65,8
PAGE
14,1
With back
face cover
52,1
Without back face
cover
Drive unit not stored inside display unit
26
POWER
DATA
START
STOP
23
PAGE
Standard drive unit
25,2
26,7
115
Transverse tracing drive unit
26
26
1
23
23
Retractable drive unit
160
2
23,2
26,7
115
3
6,6
45
46,5
115
7
PRE1344(2)SJ_210.indd 7
27.11.14 09:53
Detectors
Gear-tooth surface detectors
Standard detectors
0.75mN
2 µm/60˚
178-390
4 mN
5 µm/90˚
178-387
0.75mN
2 µm/60˚
178-386
4 mN
5 µm/90˚
178-391
4 mN
10 µm/90˚
*Tip radius / Tip angles
Measuring force
Stylus profiles*
178-388
0.75mN
2 µm/60˚
178-398
4 mN
5 µm/90˚
Dedicated to the standard/
retractable drive unit
*Tip radius / Tip angles
Dedicated to the transverse
tracing drive unit
Dedicated to the standard/
retractable drive unit
,4
ф2
0,6
1,4
61
60,1
Stylus
12,6
60°
Stylus
ф9
4,8
1,5
2,4
6
16,4
3,5
Order No.
ф9
178-296
Remarks column
1,8
Stylus
profiles*
0,4
Measuring
force
R40
0,9
Order No.
59,5
Deep groove detectors
Small hole detectors
Order No.
Measuring
force
Stylus
profiles*
178-383
0.75mN
2 µm/60˚
178-392
4 mN
5 µm/90˚
Stylus
profiles*
178-385
0.75mN
2 µm/60˚
178-394
4 mN
5 µm/90˚
Remarks column
Not available for
the transverse
tracing drive unit
2
ф9
1,5
61
Stylus
16,4
10
ф9
4,8
3,5
9
13,6
3,5
Measuring
force
60,7
Stylus
16,2
3,8
Minimum measurable
hole diameter: ø 4.5 mm
Order No.
*Tip radius / Tip angles
*Tip radius / Tip angles
ф
Remarks column
4,8
1,5
Extra small hole detectors
Order No.
Measuring
force
Stylus
profiles*
178-384
0.75mN
2 µm/60˚
178-393
4 mN
5 µm/90˚
Remarks column
Minimum
measurable hole
diameter: ø 2.8 mm
*Tip radius / Tip angles
1,6
0,8
60,3
Tastspitze
ф9
2,4
0,4
1,8
12,8
ф
8
PRE1344(2)SJ_210.indd 8
27.11.14 09:53
Optional Accessories
A myriad of accessories are available for the SJ-210. For example, even workpieces with a curved
surface (cylindrical workpieces) or those whose measurement surface is smaller than the SJ-210 driver
can be measured.
Nosepiece for fl at surface
No. 12AAA217
Nosepiece for cylindrical surface
No. 12AAA218
V-type adapter (standard equipment for S-driver)
No. 12AAE644
Point-contact adapter (standard equipment for S-driver)
No. 12AAE643
7,7 mm
m
72 m
Extension rod 50 mm
No. 12AAA210
Vertical positioning adapter
No. 12AAA219
Support feet set
No. 12AAA216
Height gage adapter
No. 12AAA222
Magnetic stand adapter
No. 12AAA221
Granite stand
No. 178-039
Driver adapter
No. 65GAA083
Note: The following special accessories cannot be used when the SJ-210 is equipped with the driver unit for traverse detection: support feet
set, nosepiece for flat surfaces, nosepiece for cylindrical surfaces, vertical positioning adapter and extension rod.
9
PRE1344(2)SJ_210.indd 9
27.11.14 09:53
Optional Accessories
Setting attachments
V type for measuring
in the cylinder axis
direction
The V-width is adjustable to
the cylinder diameter facilitating axial measurement of a
wide range of cylinder
diameters. Adjustable range:
ø 5 ~ 150 mm
Magnetic slider type
The magnet attached to the
frame bottom surface allows
taking hands-free measurement on the wall.
Inside diameter type
Greatly facilitates measurement of internal wall
surfaces of, for example, a cylinder block.
• Applicable diameter: ø 75 ~ ø 95 mm
• Accessible depth: 30 ~ 135 mm
No. 178-035
No. 178-034
No. 178-033
Multifunction thermal printer set
Assessed profiles and calculation results and curves can be
printed out by connecting the SJ-210-dedicated printer, which
is palm sized (W×D×H: 93×125×70mm) and can run on an
internal battery.
- Power supply can be selected. (AC adapter or battery pack)
- Printable items: Measurement conditions, calculation
results, assessed profile, bearing area curve (BAC),
amplitude distribution curve (ADC), and environment
settings.
Digimatic mini processor DP-1VR
By connecting this printer to the Surftest SJ-210's digimatic
output, you can print calculation results, perform a variety
of statistical analyses, draw a histogram or D chart, and also
perform complicated operations for X-R control charts.
No. 264-504-5D
No. 178-421DDS
incl. • 178-421DD Multifunction thermalprinter
• 12AAL067 Connection cable
• 150273
Batterie pack
SJ-210 to DP-1VR Connecting cable
Connecting cable 1 m Nr. 936937
Connecting cable 2 m Nr. 965014
10
PRE1344(2)SJ_210.indd 10
27.11.14 09:53
Footswitch
A footswitch is used to trigger measurement. This tool is very
useful in cases where you need to measure the same workpiece multiple times using jigs and other fi xtures.
Data transfer
The SPC interface (Digimatic) permits software-neutral data
transfer of results to a PC, e.g. directly via the USB-Input-Tool
or via the U-WAVE wireless communication system.
Connecting cable SJ-210 SPC to USB
Nr. 06ADV380D
U-WAVE wireless communication
For further information, please refer to our brochure
"U-WAVE" PRE1330.
No. 12AAJ088
Protective sheets for the display
USB cable 2 m
For connection between the Surftest SJ-210 and a PC by
means of USB connector to use the USB-Communication-Tool.
Nr. 12AAL068
Protective sheet for the color LCD (5sets)
Nr. 12AAL066
USB-Communication-Tool
Test reports are easily and quickly generated with the USB-Communication-Tool – a Microsoft Excel based macro. The information transferred via USB connecting cable contains measurement conditions, measurement results, the graphic representation of
the profile, BAC and ADC curves. A comment can be added and test reports generated either automatically or on demand. This
tool is also able to exercise control over the Surftest SJ-210; such as Start Measurement, Establish Measurement Conditions and
Set Tolerance Limits. A variety of languages are ready for direct access.
* Required environmen:
Windows XP
– Microsoft Excel 2000
Windows Vista – Microsoft Excel 2002
Windows 7
– Microsoft Excel 2007
* Windows OS and Microsoft Excel are products of Microsoft
Corporation.
11
PRE1344(2)SJ_210.indd 11
27.11.14 09:53
© MITUTOYO/D 0311 PRE1344(2)
Coordinate Measuring Machines
Vision Measuring Systems
Form Measurement
Optical Measuring
Whatever your challenges are,
Mitutoyo supports you from start to finish.
Mitutoyo is not only a manufacturer of top quality
measuring products but one that also offers qualified
support for the lifetime of the equipment, backed up
by comprehensive services that ensure your staff can
make the very best use of the investment.
Sensor Systems
Test Equipment
and Seismometers
Digital Scale and DRO Systems
Small Tool Instruments
and Data Management
Apart from the basics of calibration and repair,
Mitutoyo offers product and metrology training,
as well as IT support for the sophisticated software
used in modern measuring technology. We can also
design, build, test and deliver bespoke measuring
solutions and even, if deemed cost-effective, take
your critical measurement challenges in-house on a
sub-contract basis.
Find additional product literature
and our product catalogue
www.mitutoyo.eu
Mitutoyo Europe GmbH
Borsigstraße 8-10
41469 Neuss
Note: All information about our products, in particular the figures and pictures, drawings, dimensional and per-formance data
as well as other technical information included in this brochure are approximated mean values. All construction and design data,
technical data and specifications, dimensions and weights remain subject to changes. The standards specified by us, similar technical
regulations as well as technical data, descriptions and pictures of the products refer to the date of printing. In excess of this, our
general terms and conditions in the actual version apply. The offers submitted by us are alone definitive.
PRE1344(2)SJ_210.indd 12
Tel. +49 (0) 2137-102-0
Fax +49 (0) 2137-102-351
info@mitutoyo.eu
www.mitutoyo.eu
27.11.14 09:53