Avaya one-X™ Deskphone Edition for 9620/9620C

Avaya one-X™ Deskphone Edition for
9620/9620C/9620L IP Telephone User
Guide
16-300699
Issue 5
February 2009
© 2009 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in
this document was complete and accurate at the time of printing, Avaya
Inc. can assume no liability for any errors. Changes and corrections to
the information in this document might be incorporated in future
releases.
Note:
Using a cell, mobile, or GSM phone, or a two-way radio in close
proximity to an Avaya IP telephone might cause interference.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or
deletions to the original published version of this documentation unless
such modifications, additions, or deletions were performed by Avaya.
Customer and/or End User agree to indemnify and hold harmless
Avaya, Avaya's agents, servants and employees against all claims,
lawsuits, demands and judgments arising out of, or in connection with,
subsequent modifications, additions or deletions to this documentation
to the extent made by the Customer or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked
Web sites referenced elsewhere within this documentation, and Avaya
does not necessarily endorse the products, services, or information
described or offered within them. We cannot guarantee that these links
will work all the time and we have no control over the availability of the
linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your
sales agreement to establish the terms of the limited warranty. In
addition, Avaya’s standard warranty language, as well as information
regarding support for this product, while under warranty, is available
through the Avaya Support Web site: http://www.avaya.com/support
Licenses
Shrinkwrap License (SR). With respect to Software that contains
elements provided by third party suppliers, End User may install and
use the Software in accordance with the terms and conditions of the
applicable license agreements, such as "shrinkwrap" or "clickwrap"
license accompanying or applicable to the Software ("Shrinkwrap
License"). The text of the Shrinkwrap License will be available from
Avaya upon End User’s request (see “Third-party Components" for
more information).
Copyright
Except where expressly stated otherwise, the Product is protected by
copyright and other laws respecting proprietary rights. Unauthorized
reproduction, transfer, and or use can be a criminal, as well as a civil,
offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product
may contain software distributed under third party agreements ("Third
Party Components"), which may contain terms that expand or limit
rights to use certain portions of the Product ("Third Party Terms").
Information identifying Third Party Components and the Third Party
Terms that apply to them is available on the Avaya Support Web site:
http://support.avaya.com/ThirdPartyLicense/
Preventing toll fraud
"Toll fraud" is the unauthorized use of your telecommunications system
by an unauthorized party (for example, a person who is not a corporate
employee, agent, subcontractor, or is not working on your company's
behalf). Be aware that there can be a risk of toll fraud associated with
your system and that, if toll fraud occurs, it can result in substantial
additional charges for your telecommunications services.
Avaya fraud intervention
If you suspect that you are being victimized by toll fraud and you need
technical assistance or support, call Technical Service Center Toll
Fraud Intervention Hotline at +1-800-643-2353 for the United States
and Canada. For additional support telephone numbers, see the Avaya
Support Web site: http://support.avaya.com
Suspected security vulnerabilities with Avaya Products should be
reported to Avaya by sending mail to: securityalerts@avaya.com.
USE OR INSTALLATION OF THE PRODUCT INDICATES THE END
USER'S ACCEPTANCE OF THE TERMS SET FORTH HEREIN AND
THE GENERAL LICENSE TERMS AVAILABLE ON THE AVAYA WEB
SITE http://support.avaya.com/LicenseInfo/ ("GENERAL LICENSE
TERMS"). IF YOU DO NOT WISH TO BE BOUND BY THESE TERMS,
YOU MUST RETURN THE PRODUCT(S) TO THE POINT OF
PURCHASE WITHIN TEN (10) DAYS OF DELIVERY FOR A REFUND
OR CREDIT.
Trademarks
Avaya grants End User a license within the scope of the license types
described below. The applicable number of licenses and units of
capacity for which the license is granted will be one (1), unless a
different number of licenses or units of capacity is specified in the
Documentation or other materials available to End User. "Designated
Processor" means a single stand-alone computing device. "Server"
means a Designated Processor that hosts a software application to be
accessed by multiple users. "Software" means the computer programs
in object code, originally licensed by Avaya and ultimately utilized by
End User, whether as stand-alone Products or pre-installed on
Hardware. "Hardware" means the standard hardware Products,
originally sold by Avaya and ultimately utilized by End User.
Contact Avaya Support
All other trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see the Avaya Support
Web site: http://www.avaya.com/support
Avaya Inc. provides a telephone number for you to use to report
problems or to ask questions about your product. The support
telephone number is 1-800-242-2121 in the United States. For
additional support telephone numbers, see the Avaya Web site: http://
www.avaya.com/support
License types
Designated System(s) License (DS). End User may install and use
each copy of the Software on only one Designated Processor, unless
a different number of Designated Processors is indicated in the
Documentation or other materials available to End User. Avaya may
require the Designated Processor(s) to be identified by type, serial
number, feature key, location or other specific designation, or to be
provided by End User to Avaya through electronic means established
by Avaya specifically for this purpose.
2
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Contents
Chapter 1: Introduction to the 9620/9620C/9620L IP Telephone..........................................5
Overview..........................................................................................................................................................5
Scrolling and Navigation..................................................................................................................................7
About Icons......................................................................................................................................................8
Telephone Stand..............................................................................................................................................9
Chapter 2: Avaya Menu..........................................................................................................11
Options & Settings..........................................................................................................................................12
Setting Go To Phone Screen on Calling..........................................................................................................12
Setting the Go To Phone Screen on ringing....................................................................................................13
Changing the voice dialing setting..................................................................................................................13
Changing the voice dialing language..............................................................................................................14
Setting redial options......................................................................................................................................14
Configuring call timers....................................................................................................................................15
Configuring visual alerts..................................................................................................................................15
Setting the audio path....................................................................................................................................16
Setting contact names to display during calls................................................................................................16
Adjusting the brightness or contrast of the display..........................................................................................17
Turning button click sounds on and off............................................................................................................17
Turning error tones on or off............................................................................................................................18
Turning large text on or off..............................................................................................................................18
Changing the ring pattern................................................................................................................................19
Changing the display language......................................................................................................................19
Personalizing button labels............................................................................................................................20
Setting dialing options....................................................................................................................................20
Chapter 3: Browser................................................................................................................23
Accessing your browser..................................................................................................................................23
Chapter 4: Features menu......................................................................................................25
Accessing the Features Menu........................................................................................................................25
Calling a person from the directory................................................................................................................25
Configuring simultaneous ringing for multiple telephones (EC500)................................................................26
Chapter 5: Answering a Call..................................................................................................27
Chapter 6: Making a Call........................................................................................................29
Making an emergency call..............................................................................................................................29
Clearing a number..........................................................................................................................................29
Redialing a number........................................................................................................................................30
Using voice dialing..........................................................................................................................................30
Making a call using edit dialing......................................................................................................................31
Calling a person from the Contacts list..........................................................................................................32
Calling a person from the call log....................................................................................................................32
Chapter 7: Muting a Call........................................................................................................33
Chapter 8: Putting a Call on Hold..........................................................................................35
Chapter 9: Transferring a Call................................................................................................37
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
3
Contents
Chapter 10: Forwarding Calls................................................................................................39
Send all Calls..................................................................................................................................................39
Forwarding calls..............................................................................................................................................39
Chapter 11: Conference Calls................................................................................................41
Setting up a conference call............................................................................................................................41
Adding a person on hold to a conference call................................................................................................41
Putting a conference call on hold....................................................................................................................42
Muting a person on a conference call............................................................................................................42
Dropping the last person added from a conference call..................................................................................42
Dropping a person from a conference call......................................................................................................42
Chapter 12: Bridged Calls......................................................................................................45
Answering a call on a bridged line..................................................................................................................45
Joining a call on a bridged line........................................................................................................................45
Making an outgoing call on a bridged line......................................................................................................45
Chapter 13: Contacts..............................................................................................................47
Searching for a contact..................................................................................................................................47
Viewing Contacts details................................................................................................................................47
Adding a new contact......................................................................................................................................48
Editing a contact..............................................................................................................................................49
Deleting a contact..........................................................................................................................................49
Chapter 14: Using USB Flash Drives with your phone........................................................51
Adding contacts from an external file to your contacts list..............................................................................51
Replacing your contacts list with an external file............................................................................................52
Copying your contacts list to a USB flash drive..............................................................................................53
Temporarily using a USB contacts list............................................................................................................53
Using pictures from your USB device as a screensaver................................................................................54
Chapter 15: Call Log................................................................................................................55
Viewing the call log..........................................................................................................................................55
Viewing call log details....................................................................................................................................55
Adding an entry from the call log to your Contacts list....................................................................................56
Removing an entry from the call log................................................................................................................56
Clearing all entries from the call log................................................................................................................56
Turning off call logging....................................................................................................................................57
Chapter 16: Getting Your Messages......................................................................................59
Logging into your voicemail............................................................................................................................59
Chapter 17: About Logging In to and Out of Your Telephone............................................61
Logging in to your telephone extension..........................................................................................................61
Logging in as a guest user..............................................................................................................................62
Logging out of your telephone extension........................................................................................................62
Index.........................................................................................................................................63
4
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 1: Introduction to the 9620/9620C/
9620L IP Telephone
Your telephone provides many features, including a Phone screen to view and manage your
calls, a Call Log, a Contacts list, an integrated WML browser, a menu of options and settings,
and access to your voicemail.
Not all functions and features described in this user guide may be available on your telephone.
If you find that a function or feature is not available, please contact your system administrator.
Overview
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
5
Introduction to the 9620/9620C/9620L IP Telephone
The following table provides button/feature descriptions for the 9620/9620L/9620C telephone.
Name
6
Description
USB Port
Insert a USB device (also called a memory stick, thumb drive,
or flash drive) to transfer contacts between your phone and an
external data source; see Using USB Flash Drives with your
phone on page 51 for more information. You can also
recharge some battery-powered devices by using a USB cable
to connect the device to your telephone's USB port. Note: the
9620L does not have a USB port.
Message
Waiting Indicator
An illuminated red light in the upper-right corner of your phone
indicates you have voicemail messages waiting. If visual
alerting is enabled, this light flashes when you receive an
incoming call.
Missed Call
Indicator
The icon on the Call Log button is illuminated when you have
missed calls. The top line shows the Missed Call icon and the
number of calls missed.
Prompt Line
View the prompt line to see helpful information, such as when
you can use the right or left navigation arrows to view alternate
screens or menus.
Call
Appearances
Depending on how your system is administered, three or six
lines are available for calls. Touch the line to initiate or answer a
call. Call appearances also indicate if a feature is enabled or
disabled in the Feature view.
Line Buttons
The three line buttons with integrated LEDs show which lines
are in use and correspond to the lines on the display. Press the
line button to select that line. Line buttons also indicate if a
feature is enabled or disabled in the Feature view.
Softkeys
Use the softkeys to act on objects displayed on the screen. The
softkey labels show you the action that each key produces. The
labels and the actions vary depending on the object that is
selected.
Message
Press the Message button to connect directly to your voicemail
system.
Navigation
Arrows
Use the right and left navigation arrows to navigate between
menus or to move the cursor during text input.
OK
Press the OK button for a shortcut to an action. For example,
when you select a call log entry, pressing OK dials the number.
Phone
Press Phone to view and manage your calls.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Scrolling and Navigation
Name
Description
Contacts
Press Contacts to view the entries in your Contacts list.
Call Log
Press Call Log to view a list of your outgoing, incoming, and
missed calls.
Avaya Menu
Press Avaya Menu to configure options and settings, access
the browser, log out, or view network information.
Home
Press Home to configure options and settings, access the
browser, log out, access your favorite contacts, or view network
information.
Volume
Press volume to adjust the volume of the handset, headset,
speaker, and ringer.
Headset
Press Headset to use the headset if it is connected. Only HIS
headset cords are compatible with your phone.
Mute
Press Mute to mute a call in progress. To take a call off mute,
press Mute again.
Speaker
Press Speaker to use the speakerphone. To take a call off
speakerphone, lift the handset.
Scrolling and Navigation
When navigating through the options and features on your telephone display, use the
navigation arrows to scroll and buttons to select lines or options.
A navigation icon appears in the phone display to indicate that you can scroll to more options or
information. Use the up and down navigation arrows to scroll up or down through lists. When
only one up or down navigation arrow shows, it indicates you are at the top or bottom of the
list and can only move in the direction indicated by that arrow. Use the right and left navigation
arrows to go to other screens when the paging icon (left- and right-facing arrows) displays on
the Title Line or to move the cursor right or left when entering text.
When you scroll to a line on the display, that line is selected. The selected line is highlighted
in black with white letters. The softkey labels will change according to the options available for
the highlighted line. The OK button is a shortcut for the default action. For example, when you
select an entry in your Contacts list, pressing OK places a call to that person.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
7
Introduction to the 9620/9620C/9620L IP Telephone
About Icons
The icons in the following table indicate the state of a call, navigation choices, or the status
of a team member whose presence you are tracking.
Icon
Description
Missed call; a call was not answered or was
forwarded to voice mail.
Incoming call is ringing.
Call is active.
Call is on hold.
Your calls are being forwarded.
Conference is active.
Conference is on hold.
Use the Right or Left navigation arrow to see
additional pages/screens/options.
Scroll left for other options.
Scroll right for other options.
Scroll up or down when there is more information
than can display in the application area.
End of list; scroll up to see choices.
Beginning of list; scroll down to see choices.
The call in progress is muted.
The ringer volume is off due to pressing - on the
Volume button until the volume turns off. To
reinstate volume, press + on the Volume button.
Team icon indicating this team member is
available.
Team icon indicating this team member is busy on a
call and not available.
Team icon indicating this team member is not on a
call but is forwarding incoming calls.
Team icon indicating this team member is busy on a
call and is forwarding incoming calls.
8
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Telephone Stand
Telephone Stand
Your telephone can be placed in two positions, a lower position and an upright position. You
can adjust the display screen to different angles. To move the display screen, gently pull from
the top of the display screen towards you. As you pull the screen towards you, you will hear a
clicking sound. Each of these clicks is a locking position for the display screen. Gently push
on the display screen to adjust the screen to a previous position.
If your phone is in the upright position, reverse the tab located below the switchhook in the top
ear piece pocket (on the front of the phone). This will keep the handset seated in the correct
position. You will need a small screwdriver to lift this tab out.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
9
Introduction to the 9620/9620C/9620L IP Telephone
10
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 2: Avaya Menu
You can use the Avaya Menu to adjust and customize options and settings for your telephone,
access additional Web-based applications, get information about your phone and network
settings, and log out. When you press the Avaya Menu button, you see the following menus,
depending on how your administrator has set up your system and on the applications available
to you:
Sample Menu 1
> Options & Settings
> Browser
> Network Information
> Guest Login
> Log Out
> About Avaya one-X
> My Pictures
Sample Menu 2
> Your 1st Web
Application
> Phone Settings
> Log Out
> About Avaya one-X
> My Pictures
Sample Menu 3
> Call Settings
> Application Settings
> Screen & Sound
> Advanced Options
> Network Information
> My Pictures
Note:
On menus with WML applications, select Phone Settings to access the standard telephone
Options & Settings menu.
Options & Settings or Phone Settings, if your menu is customized, lets you change your call
settings, personalize button labels, adjust brightness and contrast, select your ringing pattern,
and more.
The Browser menu contains additional web-based applications. (If no web applications are
available for your phone, the Browser menu is not shown.)
Network Information shows a summary of network-related parameters for your phone.
About Avaya one-X provides the release number of your telephone software.
Guest Login lets you log in to a phone to which you are not normally assigned, to access your
own contacts and features.
Log Out lets you sign off the phone, to protect your settings or to allow another user to log
in. Log out does not display unless your phone (and any associated button module) is in an
idle state.
My Pictures lets you use pictures from a USB device as your telephone screensaver.
Note:
The sub-menus that appear depend on how your extension was administered. Some options
or sub-menus may not be available.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
11
Avaya Menu
Options & Settings
The Options & Settings menu contains choices for:
• Call Settings
• Application Settings
• Screen & Sound Options
• Advanced Options
Call Settings includes choices for automatically displaying the Phone screen when you get an
incoming call or when you place a call, turning call timers on or off, controlling how Redial
works, turning Visual Alerting on or off, and more.
Application Settings includes choices for personalizing button labels, turning call logging on or
off and including bridged calls in your call log.
Screen & Sound options includes choices for adjusting your phone's brightness and contrast,
ring pattern, language selection, and button clicks and tones.
Advanced Options includes choices for backing up and restoring your settings, options and
button labels, and setting up a Bluetooth® adapter if one is attached to your phone. You can
also set AGC (Automatic Gain Control) for your headset, handset, and/or speaker audio.
Setting Go To Phone Screen on Calling
Set Go To Phone Screen on Calling to Yes to automatically display the Phone screen when
you place a call.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Go To Phone Screen on Calling.
7. Press Change or OK or use the right or left navigation arrows to set the option to
Yes or No.
8. Press Save.
12
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Setting the Go To Phone Screen on ringing
Setting the Go To Phone Screen on ringing
Set Go To Phone Screen on Ringing to Yes to automatically display the Phone screen when
you get an incoming call.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Go to Phone Screen on Ringing.
7. Press Change or OK or use the right or left navigation arrows to set the option to
Yes or No.
8. Press Save.
Changing the voice dialing setting
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Voice Dialing.
7. Press Change or OK to set the option to on or off. Voice-initiated dialing is set to
on by default.
8. Press Save.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
13
Avaya Menu
Changing the voice dialing language
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Select Voice Dialing Language....
6. Press Change or OK.
7. Select the language you will speak to search for and dial your contacts.
8. Press Select or OK.
9. Press Yes to confirm the selected language.
Setting redial options
You can set Redial to dial the last number you dialed or to display a list of the last numbers
you dialed.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Redial.
7. Press Change or OK to toggle between One Number and List.
8. Press Save.
14
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Configuring call timers
Configuring call timers
You can set your call settings to display the duration of calls. You can turn the call timer display
on or off.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Display Call Timers.
7. Press Change or OK to change the setting.
8. Press Save.
Configuring visual alerts
When the Visual Alerting option is turned on, incoming calls cause the LED in the top right
corner of the phone to flash. You can turn Visual Alerting on or off.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Visual Alerting.
7. Press Change or OK to turn Visual Alerting on or off.
8. Press Save.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
15
Avaya Menu
Setting the audio path
You can set your phone to go off-hook on the Speaker or the Headset when you make an onhook call. If your system administrator has set up auto-answer, incoming calls are also
answered on the default audio path you designate here.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Audio Path.
7. Press Change or OK to change the Speaker or Headset setting.
8. Press Save.
Setting contact names to display during calls
You can set your phone to show the contact's name rather than the calling party name for an
incoming or answered call, a transferred call, or conference call when a calling or called party
number matches a number on your Contacts list.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Pair Contacts to Calls.
7. Press Change or OK to change the setting to On or Off.
8. Press Save.
16
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Adjusting the brightness or contrast of the display
Adjusting the brightness or contrast of the display
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Select Brightness or Contrast.
Note:
You cannot adjust the contrast of the 9620C color display screen.
7. Press Change or OK.
8. Select Phone.
9. Scroll to the right or left to adjust the brightness or contrast.
10. Press Save or OK.
Turning button click sounds on and off
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Select Button Clicks.
7. Press Change or OK to turn sounds on or off.
8. Press Save.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
17
Avaya Menu
Turning error tones on or off
Your telephone beeps if you make a mistake or take an action that is not allowed. If you do not
want to hear error beeps, set your error tone to Off.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Select Error Tones.
7. Press Change or OK to turn error tones on or off.
8. Press Save.
Turning large text on or off
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Select Text Size.
7. Press Change or OK to turn large text on or off.
8. Press Save.
18
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Changing the ring pattern
Changing the ring pattern
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Select Screen & Sound Options.
4. Press Select or OK.
5. Select Personalized Ringing.
6. Select a displayed ring pattern, or press Other to select from a list of eight alternative
ring patterns.
Tip:
Use Other or the Right/Left Arrows to toggle between the two sets of patterns.
7. After selecting a pattern, press Play or OK to listen to it.
8. Repeat Steps 6 and 7 until you find the ring pattern you want.
9. Press Save to make it your ring pattern.
Changing the display language
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Select Language....
7. Select a display language.
8. Press Select or OK.
9. Press Yes to confirm the selected language.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
19
Avaya Menu
Personalizing button labels
You can change the labels that are displayed for your extensions, features, and abbreviated
dial or speed dial buttons. For example, you can change the label for your extension to "My
Line."
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Application Settings.
5. Press Select or OK.
6. Select Personalize Labels...
7. Press Change or OK.
8. Select the label you want to edit.
If the label you want to edit is on the Features menu, scroll right to access the
Features menu, and select the label you want to edit.
9. Press Edit.
10. Edit the label using up to 13 characters.
Press Clear to clear all text fields and start over.
11. Press Save or OK.
12. You may revert back to the default button labels by selecting Avaya Menu >
Options & Settings > Application Settings > Restore Default Button Labels
and pressing Default.
Setting dialing options
Your phone has two dialing options. You can dial as you normally would, for example, pick up
the handset, get a dial tone, and dial the number you want (on-hook dialing). Or, you can set
"edit dialing" which mimics how you dial a call on a cell phone - you can enter all or part of the
number, backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey.
Note:
Edit dialing may not be available to you, depending on how your system is administered.
20
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Setting dialing options
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Edit Dialing.
If your telephone does not display this option, your administrator has not made this
feature available.
7. Press Change or OK to change the setting to On (Enabled) or Off (Disabled).
When on-hook dialing is in effect, dialpad (edit dial) searches are not available.
8. Press Save.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
21
Avaya Menu
22
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 3: Browser
Your telephone includes a Web browser capability that can be used to present additional
applications. The items available through the Web browser vary depending upon how your
telephone is administered. Contact your system administrator with any questions.
Access the browser through the Avaya Menu. If you don't see the Browser option on the Avaya
Menu, no Web applications are available for your phone.
Accessing your browser
1. Press Avaya Menu.
2. Press Browser or OK.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
23
Browser
24
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 4: Features menu
The Features menu gives you access to Speed Dial buttons and advanced telephony features,
such as Directory, Abbreviated Dial, and Call Forwarding. Directory allows you to dial other
users on your system by name. You can use Send All Calls and Call Forward to have your
incoming calls sent to other numbers. When set to “on,” EC500 allows calls to your desk phone
to also be sent to your cell phone. Your system administrator may also assign frequentlyused features to softkeys, to give you quick access. The particular features available to you
depend on what your administrator has assigned to your phone.
For more information about what features and options are available for your extension, contact
your system administrator.
Accessing the Features Menu
1. From the Phone screen, scroll right to access the first feature on the Features Menu.
To return to the main Phone screen, press the Phone/Exit button or the Exit softkey.
2. Scroll down to see the features that have been administered for your extension.
The green LED next to the Feature button indicates if the feature is currently on or
off. If the light is on, the feature is on. The red LED next to the Feature button blinks
while the feature label is displayed on the screen.
Calling a person from the directory
1. From the Phone screen, scroll right to access the Features menu, select Directory,
and press Select or OK.
2. Use the dialpad keys to start spelling the last name of the person you want to call.
Press each dialpad key one time for each corresponding letter. For example, for
“Hill”, press 4, 4, 5, 5.
3. Select Next to view the next name alphabetically in the directory, if necessary.
4. Press OK or enter the next letter.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
25
Features menu
5. Select Make Call when you see the name you want.
6. Press OK to dial the call.
Configuring simultaneous ringing for multiple telephones
(EC500)
The EC500 feature allows you to have incoming calls to your desk phone ring on your office
telephone and your cell phone at the same time. This allows you to answer office calls while
you are away from your desk. The cell phone number is programmed by your system
administrator.
1. From the Phone screen, scroll right to access the Features menu.
2. Select EC 500.
3. Press OK to turn simultaneous ringing on or off.
26
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 5: Answering a Call
When you receive an incoming call, the incoming call is usually selected automatically.
However, if you are already on a call or if you receive more than one incoming call at a time,
you may need to select the call you want to answer manually. If you do not have the Setting
the Go To Phone Screen on ringing on page 13 enabled, you must press Phone to choose a
line or view call options.
Note:
If your telephone is administered with non-typical settings, you may experience call handling
differences from the steps described here. Also, note that the phone will auto-scroll in certain
instances to present you with significant incoming calls.
Answer an incoming call in one of the following ways:
• If you are not on another call, lift the handset, or press Speaker to answer
using the speakerphone, or press Headset to answer using the headset.
• If you are on another call and the telephone does not automatically display the
incoming call, from the Phone screen scroll to the line with the incoming call
and press Answer or OK. If you are on another call and the telephone does
automatically display the incoming call, you can press Ans Hold to
automatically put the first call on Hold when you answer the new call.
Alternately, you can press Ans Drop to automatically drop the first call when
you answer the new call.
• To quickly move to the top of your call appearance list to answer an incoming
call on your primary line, from the Phone screen press the Phone button. You
can then press the line for the incoming call or scroll to it.
• To automatically display the Phone screen whenever you receive an incoming
call, set the Go to Phone Screen on Ringing option to Yes.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
27
Answering a Call
28
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 6: Making a Call
If you are not on a call, simply dial the number you want to call. Use the Phone screen to view
and manage calls. Press Phone to view the main Phone screen at any time.
1. Lift the handset, press Speaker or Headset (if applicable), or select an available
line and press OK.
2. Dial the number you want to call.
Making an emergency call
You do not have to be logged in to make an emergency call. If emergency calling was set up
by your system administrator, the Phone screen has an Emergency softkey to immediately
connect you with a preset emergency services number.
1. Press the Emerg softkey. If you do not see an Emerg softkey, pick up the handset or
press the Phone button, then press the Emerg softkey.
2. To end the emergency call, press the Drop softkey or press the Speaker button.
Clearing a number
Press Clear to erase all dialed digits and enter a new number.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
29
Making a Call
Redialing a number
1. From the Phone screen, press Redial.
The last number will be redialed or you will see a list of the most recent numbers
that you have dialed, from which you can select one to redial. See Setting redial
options on page 14 for information on redial settings.
2. If you are working with a redial list, scroll to the number you want to call and press
Call or OK.
Your system administrator can disable Redial functionality.
Using voice dialing
You can say a name to search for and call any contact when voice dialing is set to on. You can
optionally add a qualifier like "at home" or "mobile" with the name to get to a specific number
for the contact. The first two times you use voice dialing, a help screen displays to assist you
in using this feature.
1. Press Contacts.
2. If Voice dialing is enabled, a Voice softkey displays. If no tone is generated or if no
check mark appears next to the Voice softkey, press Voice.
Note:
To make voice-initiated dialing available each time you access your contacts, see
Changing the voice dialing setting on page 13. To change the language you want
to use for voice dialing commands, see Changing the voice dialing language on
page 14.
3. Within a few seconds or as soon as you hear the tone, say the name of the person
you want to call.
You can say the name in first name, last name order even if the name is displayed as
last name, first name order (and separated by a comma) in your Contacts list. You
can add a qualifier, for example, "at home," "at office," "mobile phone," "cell phone,"
or say one of the contact number types (Home, Work, Mobile) with the name. For
example, to reach Sam Jones at his primary number you can simply say “Sam
Jones”. To reach Sam Jones at home, you might say “Call Sam Jones at home.”
30
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Making a call using edit dialing
Note:
If you don't add a qualifier and multiple numbers exist for that contact, the
telephone always dials the first number listed.
4. When one or more contacts display:
• Press Call or OK or the applicable line button to dial the highlighted
number, or scroll to select (highlight) a different number, then press Call or
OK or the line button.
• Press Details to view the contact details associated with the highlighted
entry, or select (highlight) a different entry, then press Details.
• If none of the matches represent the contact/number you want, press Retry
and repeat the voice-initiated dialing command from Step 3.
• Press Cancel to exit voice dialing and return to the main contacts screen.
Making a call using edit dialing
Prerequisites
Your system administrator has to authorize this function. To set up edit dialing, see Setting
dialing options on page 20.
Edit dialing works just like making a call on your cell phone - just start entering the number
without hearing a dial tone. Using the Bksp softkey, you can backspace to "edit" the number
before actually dialing it.
1. From the Phone screen, enter the number you want to call.
2. To edit the number press the Bksp softkey to erase the previous character, one
character at a time. To remove the entire number, press Clear.
3. Press Send or OK.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
31
Making a Call
Calling a person from the Contacts list
1. Press the Contacts button.
2. Select the person or primary number you want to call. To call a non-primary number,
select the person, press Details, then select the desired number.
3. Press Call or OK.
Calling a person from the call log
1. Press the Call Log button.
2. Select the person or number you want to call.
3. Press the Call softkey or the OK button. Depending on administration, returning a
Missed Call may result in that Call Log entry being deleted when the calls goes
through.
32
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 7: Muting a Call
If a call is on mute and you switch between the handset, headset, or speakerphone, the mute
will be turned off. When the call is muted, the Mute button light is on and the top line displays the
Mute icon.
1. Press Mute during a call so that the other person cannot hear you.
2. Press Mute again to unmute the call.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
33
Muting a Call
34
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 8: Putting a Call on Hold
1. Press Phone to view the main Phone screen, if necessary.
2. If you are not active on the line you want to put on hold, select that line.
3. Press Hold.
Note:
A hold timer may display when you put a call on hold. For more information, see
Configuring call timers on page 15 .
4. Press Resume or the line button of the held call to retrieve the call.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
35
Putting a Call on Hold
36
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 9: Transferring a Call
1. From the Phone screen, select the line you want to transfer.
2. Press Transfer or OK .
3. Dial the telephone number, or call the person from the Contacts list, or call the
person from the Call Log list.
4. If unattended transfers have been administered, you can hang up now if you do not
want to announce the call. Otherwise, press Complete or OK to transfer the call.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
37
Transferring a Call
38
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 10: Forwarding Calls
You can forward your incoming calls to another number or to voicemail. If call forwarding is
turned on, a Forwarding icon appears on the top line of your display screen. You can choose
from a number of forwarding features, including Send All Calls and Call Forward. The
forwarding features available on your phone depend on the options your system administrator
has set. For more information about the options available to you, contact your system
administrator.
Send all Calls
When Send All Calls (SAC) is on, your incoming calls go directly to a predefined coverage
number, typically your voicemail. Incoming calls ring once at your extension and then go directly
to a number which is set by your system administrator. If the SAC feature is administered on
your phone, a SendAll softkey appears on the Phone screen for idle calls. Pressing SendAll
turns Send All Calls on. If it is already on, pressing SendAll turns it off. You can also turn Send
All Calls on or off by using the telephone Features list.
1. From the Phone screen, scroll right to access the Features menu.
2. Select SendAllCalls.
3. Press Select or OK to turn Send All Calls on or off.
Forwarding calls
Several forwarding features may be available so you can set a number to which your calls will
be forwarded, or turn off call forwarding if it is already on. If available, your call forwarding
features are listed on a Forwarding features menu.
1. From the Phone screen, scroll right to access the Features menu.
2. Select the forwarding feature you want to activate.
3. Press Select or OK to turn the call forwarding feature on.
When you turn on the Call Forwarding feature, you hear a tone prompting you to
enter the forwarding number.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
39
Forwarding Calls
4. Enter the number to which you want to forward your calls.
After you enter the forwarding number, you hear a confirmation tone.
5. Press Select or OK to turn the call forwarding feature off if it is already on.
40
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 11: Conference Calls
You can use conference calls to speak with up to five people in different locations on the same
call. Additional conferencing options may be available through Expanded Meet-Me
Conferencing. Contact your system administrator for more information about this feature.
Setting up a conference call
1. From the Phone screen, select your active call.
2. Press Conf.
3. Dial the telephone number, or call the person from the Contacts list, or call the
person from the Call Log list.
4. When the person answers, press Join or OK to add the person to the existing call.
5. Press Add and repeat these steps to add another person to the conference call.
6. Press Drop at any time to drop the last person added to the conference call.
Adding a person on hold to a conference call
1. From the Phone screen, select your active call.
2. Press Conf, or Add if you are already in a conference.
3. Select the call on hold that you want to add to the conference.
4. Press Resume to take the call off hold.
5. Press Join to add the person to the conference call.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
41
Conference Calls
Putting a conference call on hold
When you put a conference call on hold, the other parties can still talk to each other.
1. Press Hold during a conference call.
2. Press Resume or OK to resume the conference call.
Muting a person on a conference call
You may be able to silence a person on a conference call using the Silence softkey. The
individual muting feature is not available on all systems. If you do not see Silence when you
choose a person, you cannot mute that person.
1. From the Phone screen, press More > Details during a conference call.
2. Select the person you want to mute.
3. Press Silence.
4. Press Silence again to take the person off mute.
Dropping the last person added from a conference call
1. From the Phone screen, select your active call.
2. Press Drop.
Dropping a person from a conference call
This feature is not available on all systems.
42
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Dropping a person from a conference call
1. From the Phone screen, select your active call.
2. Press More then Details.
3. Select the person you want to drop.
4. Press Drop.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
43
Conference Calls
44
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 12: Bridged Calls
Your phone may show one or more bridged lines on the display screen in addition to your own
lines. A bridged line typically belongs to someone else, but bridging allows you to see if that
line is in use, answer calls on that line, or join a call in progress on that line from your telephone.
You can also make outgoing calls on a bridged line when it is not in use.
Answering a call on a bridged line
Answering a call on a bridged line is basically the same as a call on a primary line. If the ringing
line is selected, you can answer by picking up the handset or by pressing Speaker or Headset
or Answer.
1. Select the bridged call that you want to answer.
The ringing line will typically be selected automatically. If you are on another call
when a call comes in to a bridged line, you have to select the ringing line (just like
for an incoming call to a primary line).
2. Press Answer.
Joining a call on a bridged line
You can join an existing call on a bridged line.
1. Select the bridged call in progress that you want to join.
2. Press Bridge.
Making an outgoing call on a bridged line
When you make a call on a bridged line, you are using another person’s line. The caller ID
may show the call as coming from you or coming from the person whose line you are using. If
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
45
Bridged Calls
you have any questions about how the name or extension displays to the person you are
calling, contact your system administrator.
1. Select the bridged line you want to use.
2. Press OK to get a dial tone.
3. Dial the telephone number, or call the person from the Contacts list, or call the
person from the Call Log list.
46
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 13: Contacts
You can save up to 250 names and up to 3 telephone numbers per name. You can use voice
dialing to speak the contact name; see Using voice dialing on page 30 for information. You can
also import or export a Contact list using a USB device; see Using USB Flash Drives with your
phone on page 51 for information.
Note:
If you press the Contacts button and nothing happens, your system administrator has
disabled the button.
Searching for a contact
You can search for any name as described here, or you can jump to a certain group of letters in
your Contacts list by pressing the associated dial pad button. For example, if you press 3, the
Contacts list might display entries starting with 3, D, E or F depending on how you set up your
contacts and how many times you press 3 in succession. You can also search for and dial a
contact using voice dialing; see Using voice dialing on page 30for information.
1. Press Contacts.
2. Using the dialpad, start typing the name for which you want to search. Keep in mind
that a Contacts search is case-sensitive and how your Contact list is set up. If you
set up your contacts as “Last Name, First Name” start typing the letters of the last
name. If you have set up your Contacts using a different scheme, type the most
likely letter(s) that would match the contact you want to find.
3. Press Call to call the person or press More then Edit to edit contact information.
Viewing Contacts details
1. Press Contacts.
2. Select the contact you want to view.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
47
Contacts
3. Press Details to see the information available for that contact.
Selecting Details is the only way to dial a second or third number for a contact.
4. Press the appropriate softkey to call or edit this contact, delete this contact, or return
to the Contacts screen.
Adding a new contact
You can add up to three numbers for a contact.
1. Press Contacts.
2. Press New if this is your first contact list entry, or press More then New if you already
have entries in your contact list.
3. Enter the name using the dialpad.
a. Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
c. To enter a space, press 0.
d. Enter remaining letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
f. Press More > Abc to change between upper and lower case letters or to enter
numbers.
g. Press ABC again to cycle through the options (Abc/123/abc/ABC) until the type
you want to use is displayed.
h. Press More > Symbols to enter characters that are not on your dialpad.
i. Select the symbol you want to use.
j. Press OK to select the symbol.
k. Press Clear to delete all text and start over.
4. Select the next field.
5. Enter the telephone number and press Primary if applicable. The primary number is
the one that will always display without having to go into contact details.
48
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Editing a contact
6. Select the next field.
7. Select the type of number entered (general,work, mobile, home).
8. If you have another number for this contact, scroll down and repeat Steps 5 - 7. You
can add up to two additional numbers for this contact, but you can designate only
one number as primary.
9. Press Save or OK.
Editing a contact
1. Press Contacts.
2. Search for and select the contact you want to edit.
3. Press More > Edit .
4. Choose the field you want to edit.
5. Use the dialpad and softkeys to make changes to the contact information.
6. Press Save or OK.
Deleting a contact
1. Press Contacts.
2. Select the contact you want to delete.
3. Press More > Delete .
4. Press Delete to confirm or Cancel to cancel.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
49
Contacts
50
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 14: Using USB Flash Drives with
your phone
If your telephone has a USB interface and you have a USB (Universal Serial Bus) flash drive
(also called a thumb drive or memory stick), you can log into your phone from anywhere in the
world, add contacts to your Contacts list from an E-mail or other PC software program, and
display pictures from the device on your phone as a screensaver. You can also copy your
contact list from your phone to a USB flash drive, replace the contents of your phone's current
contact list with those on the USB flash drive, or temporarily use the flash drive's contacts
instead of your phone's contact list, subject to your administrator's permission.
Note:
The 9620L IP Telephone does not have a USB interface.
Avaya offers a PC application called Avaya one-X™ Deskphone USB Companion to help set
up your USB device/phone options. Your administrator has certain setup responsibilities and
can then help you determine which options are available to you and how to use the tool to set
them up. Additionally, your administrator may provide you with a USB device with a preprogrammed Extension and Password in it, or may provide you with a PC-based tool for putting
this information on a USB device. You can then use the USB device to log in to the administered
Extension and Password automatically, from any telephone in your system.
Note:
USB Login: If you have automatic USB login capability, the only Contacts you can see are
those on the USB device itself. Note that when you use the USB login, the Log Out menu
option is not available to you; the only way you can log your phone out is by removing the
USB device.
After setup, inserting the flash drive into the telephone's USB jack produces either a list of USB
actions/options or a display message notifying you that you cannot proceed because your
device is not supported or the device exceeds the telephone's available power. Whether power
is provided to the phone's USB interface depends on how the phone is powered and
administration settings. Only FAT or FAT32 file systems are currently supported; USB drives
with NTFS file systems are not supported. Multiple LUNS are not supported.
Adding contacts from an external file to your contacts list
Use a USB flash drive to add contacts from an external file to your contacts list. Keep in mind
that your contacts list cannot have more than 250 incoming entries. Contact files merged or
written to the phone's contacts list must be in a specific format. One way to ensure that the
file is in the proper format is to export your telephone's Contacts list to your USB device, which
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
51
Using USB Flash Drives with your phone
automatically creates a properly formatted file. Avaya also provides a spreadsheet tool that
uses macros to convert your Outlook contacts into the Contacts format the telephone uses.
For information on this tool, search for "Avaya one-X USB Companion" on the Avaya support
site at http://www.avaya.com/support.
Note:
If your administrator has made a special application available that allows you to log in to
your phone via a USB device, and you log in that way, the only Contacts you can see are
those on the USB device itself. Also, when you use the USB login, the Log Out menu option is
not available to you; the only way you can log your phone out is by removing the USB device.
1. Plug the USB device into the jack near the top left edge of your phone.
2. Press Select or OK to select Merge file and phone contacts.
The Merge option is shown only when both the USB file and the phone have
contacts.
3. The merge occurs automatically. When complete, review the statistics displayed,
which show the number of entries, duplicates, and any errors.
4. Press Save or OK to write the merged Contacts list back to the USB device and
return to the list of contacts/USB actions or press Exit to return to the list of contacts/
USB actions without writing the merged file to the USB device.
Note:
Attempts to merge more than the 250 entries allowed produces a List Full screen
which lets you either save the partial list (the first 250 entries) or cancel the merge
without writing the external file's contents to the telephone.
Replacing your contacts list with an external file
Use a USB flash drive to replace your entire contacts list with the contacts from an external
file. Incoming contacts must have a name and at least one and no more than three telephone
numbers with associated types. If not provided, the type of number will default to the general
type. Your system administrator can provide detailed format information about external data
source files.
1. Plug the USB flash drive into the jack near the top left edge of your phone.
2. Scroll down to Replace phone contacts with file.
3. Press Select or OK.
52
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Copying your contacts list to a USB flash drive
4. Review the statistics displayed, which show the number of valid and invalid entries,
and if applicable, how many entries exceed the 250 contact phone maximum.
5. Press Save or OK to overwrite and replace your contacts list with the file on your
USB device or Cancel to cancel the replacement and retain your current contact list.
Copying your contacts list to a USB flash drive
You can copy your entire contact list from your phone to a USB flash drive for safekeeping or to
use in an external software program. If the USB flash drive already contains a contact file, you
must first confirm that you want to replace that file.
1. Plug the USB flash drive into the jack near the top left edge of your phone.
2. Scroll down to Write file with phone contacts.
3. Press Select or OK.
4. If your USB device currently has a contacts file on it, press Save or OK to confirm
that you want to overwrite that file with the telephone's contact list.
Temporarily using a USB contacts list
You can temporarily use a contacts file on a USB flash drive rather than your phone's contact list
as long the USB flash drive remains attached to the phone. For example, copy your contacts
list to your USB flash drive and take the device with you while traveling. If you have access
to a 9600 Series guest phone with the latest telephone software at another site, you can attach
the USB flash drive and use your contacts list.
1. Plug the USB flash drive with the contacts file you want to use into the jack near the
top left edge of your phone.
2. Scroll down to Use contacts file while present.
3. Press Select or OK.
4. Press OK to access the contacts list on your USB flash drive.
Any changes or updates you make to your contacts list while the USB device is
connected affect only the temporary file on the USB device, and not your “regular”
telephone contacts list.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
53
Using USB Flash Drives with your phone
Using pictures from your USB device as a screensaver
If your USB device has a top level directory named “\Pictures” or another picture directory
that is properly administered, you can use pictures in that directory as your phone's
screensaver. Each picture displays for 5 seconds unless you specify a different value (from 5
seconds to 999 seconds). The maximum allowable height and width for each picture is 160 x
320 pixels. Your administrator can help you set up this feature. Your administrator can also
disable this feature, in which case the ”My Pictures” option will not appear on the Avaya Menu.
In addition to the features described in the Using USB Flash Drives with your phone on page
51 the Avaya one-X™ Deskphone USB Companion application includes a utility program to
convert your pictures to the correct format.
1. Plug the USB device into the jack near the top left edge of your phone.
2. At the phone, press the A (Avaya Menu) button.
3. Select My Pictures to immediately begin displaying the pictures from your USB
picture directory on the phone and then whenever the screen display “times out”
after the administered idle period.
Note:
If you disconnect the USB device from the telephone, the standard screensaver
replaces your pictures after the designated idle period.
54
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 15: Call Log
You can use the Call Log to view lists of your outgoing, answered, or missed calls. When you
have one or more missed calls, the Call Log button lights and the Missed Calls icon and the
number of missed calls display on the top line. To call a person listed on your Call Log, see
Calling a person from the call log on page 32.
Viewing the call log
1. Press Call Log.
You can go to the top of the list by pressing Call Log again.
2. Scroll to the right or left to view separate lists of answered, outgoing, or missed calls.
Note:
Depending on how your system is administered, a Missed Call counter might
appear next to a missed call showing the number of missed calls you have from
that person.
3. Scroll up or down to view the entries on the list.
Viewing call log details
1. Press Call Log.
2. Select the number you want to view.
3. Press Details.
4. Press Back to return to the list view.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
55
Call Log
Adding an entry from the call log to your Contacts list
1. Press Call Log.
2. Select the number you want to add to your Contacts list.
3. Press +Contact.
4. Edit the name and telephone number, if necessary.
5. Press Save.
Removing an entry from the call log
1. Press Call Log.
2. Select the number you want to delete.
3. Press More > Delete .
4. Press Delete or OK to confirm, or press Cancel if you do not want to delete it.
Clearing all entries from the call log
Clearing all entries from a call log might or might not delete all of the entries in every log. For
example, if you are viewing the Outgoing Calls list, only outgoing calls are deleted from the
call log. However, if you are viewing the All Calls list, pressing Clear All deletes all calls from
the call log.
1. Press Call Log.
2. Select the list you want to delete.
3. Press Clear All to delete all of the entries in the list you are viewing.
4. Press Clear All or OK to confirm.
56
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Turning off call logging
Turning off call logging
You can turn call logging on or off. If you have bridged call appearances on your phone, you
can choose whether or not to include calls to your bridged lines in your call log.
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Application Settings.
5. Press Select or OK.
6. Select the type of call logging you want to turn off.
To turn logging of bridged lines on or off, select Log Bridged Calls and press Change
or OK.
7. Press Change or OK to turn call logging on or off.
8. Press Save.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
57
Call Log
58
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 16: Getting Your Messages
Press the Message button to connect directly to your voicemail system.
The lighted Message button and a red light on the upper right-hand corner of your
telephone indicate when you have messages waiting. Your messages are an
administered function. Contact your system administrator with any questions.
Logging into your voicemail
1. To log in to your voicemail, press the Message button.
2. Follow the voice prompts from your voicemail system.
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
59
Getting Your Messages
60
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Chapter 17: About Logging In to and Out of
Your Telephone
Logging in and out maintains your preferences, call information, and options if you share a
telephone with other users. Log out to prevent unauthorized use of your telephone during an
absence.
Note:
Depending on how your phone is administered, for example, whether Call Log backup is
enabled or not, Call Log information may be lost when you log out your extension.
Your administrator may provide you with a USB device with a pre-programmed Extension and
Password in it, or may provide you with a PC-based tool for putting this information on a USB
device. This will enable you to use the USB device to log in to the administered Extension and
Password automatically, from any telephone in your system. See your administrator for details.
If you log in with the USB Login option, the only way to log out is by removing the USB device
from the phone connection.
Note:
When you use the USB Login, the only Contacts you will be able to see are the Contacts
on the USB device. See Using USB Flash Drives with your phone on page 51 for more
information.
Logging in to your telephone extension
Log in from the initial screen when it prompts you for your extension.
1. Enter your extension.
2. Press Enter or OK.
3. Enter your password.
4. Press Enter .
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
61
About Logging In to and Out of Your Telephone
Logging in as a guest user
Log in to another phone as a guest to retain the features and functionality of your own phone.
For example, if you are temporarily using a visitor's office telephone but want to have your
Contacts list available. The telephone must be on-hook to select this feature.
1. Press Avaya Menu.
2. Select Guest Login.
3. Enter your extension.
4. Press Enter or OK.
5. Enter your password.
6. Press Enter or OK.
7. Scroll left or right to select the expected amount of time you will use this phone. You
can log out as a guest at any time despite the duration you select.
8. Press Enter or OK.
Logging out of your telephone extension
1. Press Avaya Menu .
2. Log Out.
3. Press Log Out or OK.
4. Press Log Out to confirm.
62
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Index
A
Applications
Contacts ...............................................................47
Audio path
on-hook ................................................................16
Auto-answer ...............................................................16
Avaya Menu
about ....................................................................11
options .................................................................12
text size ................................................................18
B
Bridged Calls
about ....................................................................45
answering .............................................................45
joining ...................................................................45
Browser
about ....................................................................23
accessing .............................................................23
Button Click Sounds
configuring ...........................................................17
Button Labels
personalizing ........................................................20
C
Call Log
about ....................................................................55
calling a person ....................................................32
clearing entries .....................................................56
removing an entry ................................................56
turning off .............................................................57
viewing .................................................................55
viewing details ......................................................55
Call Settings
changing voice dialing language ..........................14
changing voice dialing setting ..............................13
Call Timers
configuring ...........................................................15
Calling a person
from the call log ....................................................32
from the Contacts list ...........................................32
Calling a Person
from the directory .................................................25
Calling, using voice dialing .........................................30
Clearing a number ......................................................29
Conference Calls
about ....................................................................41
adding a person on hold ......................................41
dropping a person ................................................42
dropping the last person ......................................42
muting a person ...................................................42
putting a call on hold ............................................42
setting up .............................................................41
Contacts ....................................16, 30, 47–49, 51–53, 56
using temporary USB files ...................................53
about ....................................................................47
adding a new ........................................................48
adding from the call log ........................................56
copying to USB flash drive ...................................53
deleting ................................................................49
editing ..................................................................49
importing/exporting via USB flash drives .............51
merging USB files with .........................................51
name display during calls .....................................16
searching ........................................................30, 47
selecting ...............................................................47
Contacts List
calling a person ....................................................32
Copying contacts list to USB file ................................53
Coverage ....................................................................39
D
Dialing Options
setting ..................................................................20
Directory
calling a person ....................................................25
Display
adjusting brightness .............................................17
adjusting contrast .................................................17
E
Edit dialing ............................................................20, 31
Emergency call ...........................................................29
Error Tones
turning off .............................................................18
F
Features
about ....................................................................25
accessing .............................................................25
Flash drives ................................................................51
Forwarding
a call .....................................................................39
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
63
Index
Forwarding Calls
about ....................................................................39
G
Go To Phone Screen Options on Calling
setting ..................................................................12
Go To Phone Screen Options on ringing
setting ..................................................................13
Guest login ............................................................61, 62
H
Hold
conference calls ...................................................42
I
Icons in telephone display
about ......................................................................8
Incoming calls
directing to multiple telephones ...........................26
Incoming Calls
answering .............................................................27
forwarding ............................................................39
sending to coverage .............................................39
transferring ...........................................................37
On-hook dialing ..........................................................20
Options & Settings
about ....................................................................12
call logging ...........................................................57
changing language ...............................................19
changing ring pattern ...........................................19
configuring visual alerts .......................................15
go to phone screen on calling ..............................12
go to phone screen on ringing .............................13
redial settings .......................................................14
Setting dialing options ..........................................20
Outgoing calls
making a call ........................................................29
Outgoing Calls
edit dialing a number ............................................31
making a call on a bridged line ............................45
redialing a number ...............................................30
P
Phone Settings
about ....................................................................12
Pictures
from USB files as a screensaver ..........................54
R
L
Language
changing ..............................................................19
changing voice dialing ..........................................14
legal notices .................................................................2
Logging in as a guest .................................................62
Logging in to your telephone ......................................61
Logging in to your telephone extension ......................61
Logging out of your telephone extension ...................61
Login as a guest user .................................................61
M
Memory sticks ............................................................51
messages
getting ..................................................................59
Muting Calls ................................................................33
N
Navigation Arrows
right & left ...............................................................7
up & down ..............................................................7
64
O
Redial .........................................................................30
Redial Options
setting ..................................................................14
Replacing contacts list with an external file ................52
Ring Pattern
changing ..............................................................19
S
Screensaver
from USB pictures ................................................54
Scrolling and Navigation
about ......................................................................7
SENDALL ...................................................................39
T
Telephone display icons
about ......................................................................8
Telephone Stand
about ......................................................................9
Text Size
turning off .............................................................18
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
Index
Thumb drives ..............................................................51
Transfer ......................................................................37
U
USB files .........................................................51, 53, 54
merging with contacts list .....................................51
pictures ................................................................54
USB flash drives
working with .........................................................51
V
Visual Alerts
configuring ...........................................................15
Voice dialing ..........................................................13, 14
changing setting ...................................................13
Voicemail
logging in ..............................................................59
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009
65
Index
66
Avaya one-X™ Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
February 2009