9V Battery Powered Communication Capability

9V Battery Powered
Communication Capability
Model EIB605C Photoelectric
•
Interconnect up to 12 battery powered alarms
•
•
•
•
•
•
•
•
•
•
•
•
•
Optional upgrade to
interconnect
Early detection to all standard domestic fires types
Built-in high audibility warning sounder
Large Easy to use Test/Hush button
Hush Feature allows nuisance alarm control
Easy to install twist-on base design
Aesthetically pleasing, compact design
Innovative and robust optical chamber design
Low battery warning
Manufactured in Ireland to ISO 9001:2000
Certified to AS3786
EN 14604:2005 3rd party approved
5 year Guarantee
Product Description
Operation
•
The smoke detector will activate the built in sounder
upon sensing smoke particles. It will automatically
reset and silence the alarm when the smoke
particles are no longer present in the chamber.
•
The red indicating LED will flash once every 40
seconds to show that the alarm is powered and it
has performed an automatic self-test.
•
The built in sounder will provide a minimum sound
output of 85dB at 3m.
•
Pressing and holding the “Test/Hush” button will
perform a self test and sound the horn – checking
the chamber, electronics and horn.
The EIB605C maybe hardwire interconnected to twelve
battery powered alarms enabling all alarms to sound if
just one of the interconnected alarms should be
triggered.
•
Momentarily pressing the “Test/Hush” button when
an alarm is sounding will set the alarm into “HUSH”
mode. This reduces the sensitivity for a period of 10
minutes, after which the alarm automatically resets –
providing control over nuisance alarms.
The EIB605C modular design allows it to be upgraded
•
The smoke detector will emit a beep every 40
seconds to indicate that the battery is near depletion
and needs replacing.
The EIB605C is an Photoelectric (Optical) Smoke Alarm
using the light scatter principle, giving a quick response
to all standard fires. It’s powered by a 9V replaceable
alkaline battery (supplied with the alarm)
The EIB605C is designed for simple installation,
commissioning and maintenance
The EIB605C has a large, easy to use, combined
Test/Hush button enables full testing of the alarm and
the ability to silence nuisance alarms.
The EIB605C has an innovative high performance optical
chamber with integral fixed insect screen reducing the
possibility of nuisance alarms.
for
functionality with the addition of the
EIB605MRF Radio frequency module.
Australia Head Office: 4 Pike Street Rydalmere NSW 2116
Ph+61 2 9684 1466 Fx+61 2 9684 4146 Toll Free 1300 78 FIRE
New Zealand Unit 106, The Zone, 23 Edwin Street Mount Eden 1024
Ph+64 9 638 4644 Fx+64 9 6384645 Toll Free 0800 220 007
Web: www.brooks.com.au
EIB605C 191110
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.
Sydney
-
Melbourne
-
Adelaide
-
Brisbane
-
Perth
-
Hobart
-
Darwin
-
New Zealand
fire products and solutions
Model EIB605C Optical
Technical Specification
Sensor:
Alarm:
Optical, uses light scatter from
smoke particles
Piezoelectric-horn (built-in)
Alarm Sound Output: 85dB (minimum) at 3m
Sensitivity:
Temperature Range: 0 to 40°C
Complies with the requirements of
BS EN 14604: 2005
Airspeed:
Humidity Range:
15% to 95% Relative Humidity –
non condensing
Interconnect:
Hardwire interconnect up to 12
battery powered alarms.
Essentially immune to the effect
of airspeed.
Button Test:
Simulates the effect of smoke to
check the chamber, electronics
and horn.
Hush:
Silences
nuisance
Automatically
resets
approximately 10 minutes.
A combination of up to 12 battery
and Mains powered alarms maybe
alarm.
after
interconnected.
Fixing:
Screw fixings supplied
Supply Voltage:
9V Battery
Dimensions:
115mm
(height)
Power-On Indicator:
Red LED flashes through cover
every 40 seconds
Weight:
200 grams
Warranty:
5 year (limited) warranty
Approvals:
Certified to AS3786
VdS approved to
BS EN14604:2005, CE approved,
Manufactured to ISO 9001:2000
quality standards.
Installation & Placement
(diameter)
x
45mm
Specifications are subject to change
Alarms should be placed in accordance with the general guidelines shown in
the diagram above. These recommendations are based on the problem of
areas of “dead air” close to corners of rooms and apexes of ceilings, which
could result in the prevention of smoke reaching the smoke detector
Please consult the Instruction Leaflet supplied with the EIB605C for detailed
instructions as to how to correctly install and position the smoke detector
Important Precaution:
Do not install the actual smoke/heat
alarm itself in new or renovated
buildings until all work is completed
(including floor coverings) and the
building has been fully cleaned.
(Excessive dust and debris from
building work can contaminate the
smoke chamber and cause problems,
and it will also invalidate the guarantee).
If it must be installed, cover it
completely, particularly around the
edges, with a dust cover (eg. a plastic
bag), until all cleaning is finished..
Specifications are subject to change
Australia Head Office: 4 Pike Street Rydalmere NSW 2116
Ph+61 2 9684 1466 Fx+61 2 9684 4146 Toll Free 1300 78 FIRE
New Zealand Unit 106, The Zone, 23 Edwin Street Mount Eden 1024
Ph+64 9 638 4644 Fx+64 9 6384645 Toll Free 0800 220 007
Web: www.brooks.com.au
EIB605C 191110
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.
Sydney
-
Melbourne
-
Adelaide
-
Brisbane
-
Perth
-
Hobart
-
Darwin
-
New Zealand
fire products and solutions