B u i l d i n g F o r w a r d To g e t h e r
PXI/DAQ/DAQe-2000 Series
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
Features
●
®
x1 lane PCI Express Interface (DAQe-2000 series)
●
PXI specification Rev. 2.2 compliant (PXI-2000 series)
●
4-CH differential analog inputs
●
Bipolar or unipolar analog input ranges
●
Programmable gains of x1, x2, x4, x8
●
Scatter-gather DMA for both analog inputs and outputs
●
2-CH 12-bit multiplying analog outputs with waveform generation
●
24-CH TTL digital input/output
●
2-CH 16-bit general-purpose timer/counter
●
Analog and digital triggering
●
Fully auto calibration
●
Multiple cards synchronization through SSI (System
●
Synchronization Interface) bus or PXI trigger bus
Introduction
ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneoussampling multi-functionDAQ cards to meet a wide range of
application requirements. The devices can simultaneously sample
4 AI channels with differential input configurations in order to
achieve maximum noise elimination. They also provide 2-CH 12bit analog outputs with waveform generation capability, which
can be performed together with analog input functions. If more
analog input or output channels are required, multiple cards can be
synchronized through the SSI (System Synchronization Interface)
bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/
response testing.
The PXI/DAQ/DAQe-2000 series also features analog and digital
triggering, 24-CH programmable digital I/O lines, and 2-CH
16-bit general-purpose timer/counter. The auto-calibration
functions adjust the gain and offset to within specified accuracies
such that you do not have to adjust trimpots to calibrate the cards.
Ordering Information
●
●
●
P
Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
●
PXI/DAQ/DAQe-2010
4-CH DI 14 bits 2 MS/s MS/s Simultaneous-Sampling
Multi-Function DAQ Cards
PXI/DAQ/DAQe-2005
4-CH DI 16 bits 500 kS/s MS/s Simultaneous-Sampling
Multi-Function DAQ Cards
PXI/DAQ/DAQe-2006
4-CH DI 16 bits 250 kS/s MS/s Simultaneous-Sampling
Multi-Function DAQ Cards
PXI-2010
DAQ-2010
DAQe-2010
Operating Systems
●
Windows 7/Vista/XP/2000/2003 Server
●
Linux
Recommended Software
●
AD-Logger
●
VB.NET/VC.NET/VB/VC++/BCB/Delphi
●
DAQBench
Driver Support
●
DAQPilot for LabVIEW™
●
DAQ-MTLB for MATLAB®
●
D2K-DASK for Windows
●
D2K-DASK/X for Linux
Terminal Boards & Cables
●
●
DIN-68S-01
Terminal Board with One 68-pin SCSI-II
Connector and DIN-Rail Mounting (Cables are not included.)
ACL-10568-1
68-pin SCSI-VHDCI cable (mating with AMP-787082-7), 1 M
SSI Bus Cables (for multiple cards synchronization)
●
ACL-SSI-2/3/4
SSI Bus cable for two, three, and four devices
Specifications
Model Name
Analog Input
Resolution
Number of channels
Maximum sampling rate
Programmable gain
Bipolar input ranges
Unipolar input ranges
Offset error
Gain error
Input Coupling
Overvoltage protection
Input Impedance
CMRR (gain = 1)
-3 dB small signal
bandwidth (gain = 1)
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
Analog Output
Number of channels
Resolution
Output ranges
Maximum update rate
Slew rate
Settling time
Offset error
Gain error
Driving capacity
Stabililty
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
Digital I/O
PXI/DAQ/DAQe-2010
14 bits
2 MS/s
±3 mV
±0.1% of FSR
1 MHz
PXI/DAQ/DAQe-2005
16 bits, no missing codes
16 bits, no missing codes
4 simultaneous-sampling channels with differential input
500 kS/s
250 kS/s
1, 2, 4, 8
±10 V, ±5 V, ±2.5 V, ±1.25 V
0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
2 mV
±1 mV
±0.04% of FSR
±0.03% of FSR
DC
Power on: Continuous ±35 V, Power off: Continuous ±15 V
1 GΩ/100 pF
85 dB
1 MHz
±3mV
±0.05% of max. output
2 voltage outputs
12 bits
0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
1 μs
20 V/μs
3 μs to ±0.5 LSB accuracy
±1mV
±0.04% of max. output
5 mA
Any passive load, up to 1500 pF
Software, external digital/analog trigger, SSI bus
Post-trigger, delay-trigger, and repeated trigger
2 k samples
Programmed I/O, scatter-gather DMA
8255 24-bit programmable input/output
5 V/TTL
Programmed I/O
Number of channels
Resolution
Compatibility
Base clock available
2
16 bits
5 V/TTL
40 MHz , external clock up to 10 MHz
Onboard reference
Temperature drift
Stabililty
+5 V
±2 ppm/˚C
6 ppm/1000 Hrs
Auto Calibration
General Specifications
Dimensions
Connector
Operating temperature
Storage temperature
Humidity
Power requirements
600 kHz
Software, external digital/analog trigger, SSI bus
Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
8 k samples
512 samples
512 samples
Polling, scatter-gather DMA
Number of channels
Compatibility
Data transfers
Timer/Counter
PXI/DAQ/DAQe-2006
±1mV
±0.04% of max. output
160 mm x 100 mm (not including connectors) (PXI-2000 series)
175 mm x 107 mm (not including connectors) (DAQ-2000 series)
168 mm x 107 mm (not including connectors) (DAQe-2000 series)
68-pin VHDCI-type female
0 to 55˚C
-20 to 70˚C
5 to 95%, non-condensing
+5 V 1.82 A typical (PXI/DAQ-2010)
+5 V 2.04 A typical (PXI/DAQ-2005)
+5 V 1.82 A typical (DAQ-2006)
+3.3 V 1.246 A, +12 V 0.448 A
+3.3 V 1.03 A, +12 V 0.75 A
+3.3 V 1.02 A, +12 V 0.67 A
typical (DAQe-2010)
typical (DAQe-2005)
typical (DAQe-2006)
www.adlinktech.com
All products and company name listed are trademarks or trade names of their respective companies.
Updated Dec. 2, 2016. ©2016 ADLINK Technology, Inc. All Rights Reserved.
All specifications are subject to change without further notice.
B u i l d i n g F o r w a r d To g e t h e r
Pin Assignment
Connector Pin Assignment
CH0+
CH1+
CH2+
CH3+
EXTATRIG
DA1OUT
DA0OUT
AOEXTREF
SDI3_1 / NC*
SDI2_1 / NC*
SDI1_1 / NC*
SDI0_1 / NC*
AO_TRIG_OUT
AI_TRIG_OUT
GPTC1_SRC
GPTC0_SRC
GPTC0_GATE
GPTC0_OUT
GPTC0_UPDOWN
EXTTIMEBASE
AFI1
PB7
PB5
PB3
PB1
PC7
PC5
DGND
PC3
PC1
PA7
PA5
PA3
PA1
1
35
2
36
3
37
4
38
5
39
6
40
7
41
8
42
9
43
10 44
11 45
12 46
13 47
14 48
15 49
16 50
17 51
18 52
19 53
20 54
21 55
22 56
23 57
24 58
25 59
26 60
27 61
28 62
29 63
30 64
31 65
32 66
33 67
34 68
CH0CH1CH2CH3AIGND
AOGND
AOGND
AOGND
SDI3_0 / NC*
SDI2_0 / NC*
SDI1_0 / NC*
SDI0_0 / NC*
EXTWFTRG
EXTDTRIG
DGND
DGND
GPTC1_GATE
GPTC1_OUT
GPTC1_UPDOWN
DGND
AFI0
PB6
PB4
PB2
PB0
PC6
PC4
DGND
PC2
PC0
PA6
PA4
PA2
PA0
*Pin 9-12 and pin 43-46 are SDI<0..3>_n
for 2010; NC for 2005, and 2006