MTI | Oral Surgery Chairs and Accessories
U.S. & Canada 800-924-4655 | International 801-875-4999 | www.mti.net
MTI, Inc.
Oral Surgery Brochure 071039 Rev A (09/13)
Strength in patient care.™
MTI OUTPERFORMS THE COMPETITION
IN DESIGN AND CHAIR FEATURES.
SIMPLIFY
DELIVERY OF CARE
WITH A WORKFLOW SOLUTION
TAILORED TO MEET YOUR NEEDS
2
Model
M
Mo
deel 721
721
72
21 chair
ch
hai
air shown with two Floating
Ar
A
Arm™
rm™
m™ IIV
V syst
ssystems,
ystems, prosthetic headrest, and
designer upholstery style.
Patient Arm Management
MTI offers standard and premium patient IV
and patient arm management systems. We
also have an entire selection of Floating Arm™
configurations. The MTI Floating Arm™ (see
selection page 14) system is a patented arm
system which helps eliminate the need for
continual IV and patient arm readjustments.
The system prevents arms from colliding with
the chair (inset photo) should you actuate the
auto return function and forget to reposition
the arms at the conclusion of a procedure.
Superior Base Design
All MTI chair bases are telescoping and low-voltage DC-powered, providing
a straight up and down ascent and decent. This eliminates the forward
and backward movement of all cantilever base designs found in most
competitive chairs. MTI’s advanced base design also offers superior lifting
capacities of over 600 lbs., making it easy to accommodate even the
heaviest of patients.
Headrest Selections to
Meet Your Needs
MTI produces an entire family of specialty oral surgery headrests with an
intuitive locking system which is easier to adjust than competitive headrest
lock systems. If forearm supports are important, the MTI resilient urethane
closed cell molded construction is far superior in comfort to the machined,
hard plastic or the sandwiched vinyl construction of competitive forearm
support headrests.
Rugged Construction and Velcro®
Upholstery Attachment
All steel-welded construction and steel cushion substrates make the MTI
chairs able to handle extremely heavy loads and assure long table or chair
life. Velcro®-attached cushions make it easy to change chair color, replace a
damaged cushion, and afford easy cleaning.




SUPERIOR
PATIENT
ACCESS
Standard on every
MTI surgery table
and consult chair
Products for your Oral Surgery office:
 721 Contour Seat Surgery Chair
 EG Style Stool with foot ring
 EG Style Stool with curved body
support
 OSIT Table
3
MTI Model 721 Contoured Seat
Tri-Power Surgery Chair
POWER LIFT, POWER BACK, AND POWER TILT
L FFUNCTIONS
UNCTIONS
Model 721 chair shown with
System AF arm configuration,
(1) Floating IV and Patient
Arm™, with prosthetic
headrest and designer
upholstery style. See pages
14–15 for additional arm and
headrest selections.
4
Positions from upright to contour and trendelenburg are easily attained with the three-power functions of the 721 chair.
The MTI 721 offers maximum patient access and
at the same time provides the patient unmatched
comfort to aid in patient tranquility.
Thirteen different arm configurations and
numerous headrest options provide additional
versatility. Additional options like programmability,
swivel bases, and mobility help satisfy the demands
of today’s oral surgery practice.
Standard features include: 24-volt low-voltage
DC-motors, 19” (48.3 cm) entry height with 16”
(40.6 cm) vertical travel power lift base, power
back and power tilt for trendelenburg positioning,
headrest of choice, all steel frame and cushion
substrates, selection of arm styles, designer or
smooth Velcro®-attached upholstery styles in
standard foams (optional memory foams and
Ultraleather™ styles available), foot control or
remote hand control with auto return, stop/cancel,
and any button cancellation.
Whether standing or sitting, MTI chairs provide
unmatched patient access.
Ultra-thin backrest allows for easy access and
comfort in positioning the knees underneath
without headrest lock interference.
5
MTI Models OS428/429/430
Full Knee Break Quad-Power
Surgery Tables
POWER LIFT, POWER BACK, POWER TILT,
L AND POWER FOOT FUNCTIONS
Model OS430 chair shown
with System DF Floating Arm™
IV configuration, articulating
deep oval headrest, and
smooth upholstery style. See
pages 14 – 15 for additional
arm and headrest selections.
6
Model OS428 20” wide
Model OS429 22” wide
Model OS430 24” wide
Choice of 20”, 22”, and 24” widths are available for the OS430 Series tables.
Tapered or square back designs are available on the
OS430 and OS429 models. OS428 is only available in a
tapered back design.
The OS430 Series surgery tables offer more
flexibility than any other surgery table on the
market. They are available in three maximum
widths, 20”, 22”, and 24” (50.8, 55.9, and 61 cm), two
different min/max height capabilities, 19/30.5”
(48.3/77.5 cm) and 21/37” (53.3/94 cm), and in two
different back styles: tapered and square.
The OS430 Series surgery tables are made even
more versatile in meeting the needs of any
practice with one of the thirteen different arm
configurations. Programmability, swivel and
mobile base options make the OS430’s even more
adaptable to today’s oral surgery practice needs.
Standard features include: 24-volt low-voltage
DC-motors, choice of width (20”, 22”, 24”) [50.8,
55.9, 61 cm] and back style (tapered or square),
19” or 21” (48.3 or 53.3 cm) entry height with a
11.5” or 16” (29.2 or 40.6 cm) vertical travel power
lift base, respectively, power back, power tilt
for trendelenburg positioning, and power foot,
headrest of choice, all steel frame and cushion
substrates, selection of arm styles, smooth Velcro®attached upholstery in standard foams (optional
memory foams and Ultraleather™ styles available),
foot control, remote hand control, or back mounted
hand switches with auto return, stop/cancel, and
any button cancellation.
The tapered back of the OS430 Series tables provides exceptional
access to the patient and the four-power functions affords
maximum patient positioning versatility.
Positions from upright to contour, flat, and trendelenburg are
easily attained with the four-power functions of the OS430
Series tables.
7
705/710
MTI Model 705 Dual
and 710 Tri-Power
Fixed Contour Seat Consult Chairs
MODEL 705 POWER LIFT AND BACK
MODEL 710 POWER LIFT, BACK, AND INDEPENDENT POWER TILT FUNCTIONS
Model 710 shown with
articulating prosthetic
headrest and designer
upholstery style. See
page 15 for additional
headrest selections.
The MTI 705 Dual-Power (lift and back) and the
Model 710 Tri-Power (lift, back, and tilt) fixed contour
Exam/Consult chairs provide the ultimate in patent
comfort with flip-up and lock-down arms for those
non-surgical procedures and examinations.
Model 705 has a fixed 7-degree seat tilt for
increased patient comfort and economy, and
Model 710 has a separate independent power tilt
for up to 30-degrees of trendelenburg.
The MTI consult chairs can be equipped with
many of the options previously available only
on major surgery chairs, such as electrically
operated swivel base, mobile base options,
and programmability.
Standard features include: 24-volt low-voltage
DC-motors, 19” (48.3 cm) entry height with 16”
(40.6 cm) vertical travel power lift base, power back
and power tilt (Model 710 only), headrest of choice,
all steel frame and cushion substrates, designer or
smooth Velcro®-attached upholstery in standard
foams (optional memory foams and Ultraleather™
styles available), foot control, remote hand control,
or back mounted hand switches with auto return,
stop/cancel, and any button cancellation.
Compensating flip-up, lock-down
arms are found on all exam/
consult and imaging chairs.
8
Multiple positions and superior patient access are available
with the power functions of the MTI Consult Chairs.
MTI Model 724
724
Tri-Power Coordinated
Back/Leg Consult Chair with Full Knee Break
MODEL 724 POWER LIFT, POWER COORDINATED BACK/LEG
AND INDEPENDENT POWER TILT FUNCTIONS
The MTI Model 724 Tri-Power (lift, coordinated back/
leg and independent power tilt) Full Knee Break
Exam/Consult chair provides easy patient entry
with flip-up and lock-down arms for those nonsurgical procedures and examinations.
Model 724 shown in
designer upholstery style
with oval articulating
headrest. See page 15
for additional headrest
selections.
Model 724 has a separate independent power tilt
for up to 15-degrees of trendelenburg. An optional
swivel top is also available to aid in special patient
positioning requirements.
Model 724 is available in either of two entry/
operate heights, a high base “H” model, 21” (53.3
cm) entry height with 16” (40.6 cm) of vertical rise
and a low base “L” model, 19” (48.3 cm) entry height
with 11.5” (29.2 cm) of vertical rise.
Standard features include: 24-volt low-voltage
DC-motors, 19” or 21” (48.3 or 53.3 cm) entry height
with a 11.5” or 16” (29.2 or 40.6 cm) vertical travel
power lift base, respectively, power back and
coordinated power back/legrest and independent
power tilt, headrest of choice, all steel frame and
cushion substrates, designer or smooth Velcro®attached upholstery in standard foams (optional
memory foams and Ultraleather™ styles available),
foot control or back mounted hand switches
with auto return, stop/cancel, and any button
cancellation.
Optional Flip-up Footrest is available
in place of extended legrest.
Multiple positions and superior patient access
are available with the power functions of the
MTI Consult Chairs.
9
MTI Model 421E
421E/401
Manual/Electric and
401 Manual/Electric Imaging/Exam Chairs
MODEL 421E HYDRAULIC POWER LIFT AND MANUAL COORDINATED BACK/LEG FUNCTIONS
MODEL 401 HYDRAULIC POWER LIFT AND MANUAL BACK
The Model 421E Power Lift and Manual coordinated
back/leg and the Model 401 Power Lift and Manual
Back chairs are ideal for imaging and brief exams.
The precision gas spring counterbalances the
patient in recline and aids in returning patients to the
upright position. The back-mounted handle release
is readily accessible from both sides of the chair back
and is actuated in either an up or down direction
for a smooth recline or rise, while coordinating the
movement of the back and the legrest.
Model 421E shown with
oval articulating headrest
and designer upholstery
style. See page 15
for additional headrest
selections.
The arms compensate with the back as it is reclined.
The flip-up feature of the armrest aid in patient entry/
exit, and the arm locks in the down position for patient
security. On the Model 421E, as the back reclines the
footrest rises in a coordinated manner. Conversely, on
the Model 401, when the back is lowered the stainless
steel looped footrest does not move.
The 8” rise electro-hydraulic base is foot controlled by
two pedals on the base. Both Model 421E and 401
are available in a manual hydraulic base, 421M and
400, respectively.
Standard features include: 8” (20.3 cm) vertical
travel hydraulic power lift base on both models,
Power hydraulic base with a 19” (48.3 cm) entry
height and 8” (20.3 cm) of vertical travel, manual
back coordinated legrest recline on Model 421E
and manual back only on Model 401, headrest of
choice (non-articulating is standard on Models
421M/401/400), all steel frame and cushion
substrates, and designer (421E only) or smooth
Velcro®-attached upholstery in standard foams
(optional memory foams and Ultraleather™
styles available).
10
Model 401 shown with non-articulating
oval headrest and optional tear drop
stabilizer plate (TDSP).
MTI Model TRC600
and TRC600XL Mobile
Patient Transfer/Recovery Chairs
TR600/600XL
MOBILE BASE AND MANUAL RECLINE
The MTI TRC600 and TRC600XL provide a safe and
comfortable patient management platform for
surgery recovery, transport, and other clinical needs.
These models provide three positions from upright
to trendelenburg through a control handle located
on the rear of the recliner back accessible from
either side.
Model TRC600 in
upright postion.
The MTI TRC600XL has a higher weight capacity
and is slightly larger than the TRC600 (see
specifications).
Standard features include: 5” swivel locking quietrun casters, two swing-up 11” x 18” utility tables, and
transport handle. Other options and models are
available upon request.
Only available in the
following Standard
Premium Upholstery
Colors: Taupe, Blue
Ridge, and Black.
Taupe
US 410
Blue Ridge
US 427
Black
US 393
Model TRC600 with optional
IV rod and holder.
Model TRC600XL in reclined position.
11
MTI OSIT
Mobile Instrument Tables
OSIT
The OSIT Series of mobile instrument tables are
designed with all steel frame construction and an
attractive Crystal laminate top for the 1000 Series
and a Frosty White solid surface top for the 2000
series, both with a laminated underside to aid in
cleaning. The OSIT tables can be optionally ordered
in special colors.
The OSIT mobile tables provide a stable and
adjustable working surface for medical and dental
specialties needing additional working surfaces.
They efficiently use floor space next to and over
the patient by straddling the patient and the chair/
table to position the table where it is needed.
They are adjustable from 30.5” to 48” (77.5 to
121.2 cm) and provide a 23.5” x 39” (60 x 99 cm)
sculptured counter top working surface. Counter
top edge guards, IV rod and holder, and high volume
evacuation tip holders are also optionally available.
OSIT shown with optional
counter top edge guard
straddling Model 721 chair
with stool.
A 21” x 12” (53.3 x 30.5 cm) pullout tray for support
of an instrument tray or an additional work surface
is standard on the OSIT-1001 and OSIT-2001 models.
Standard features include: Four twin-wheel
locking urethane tread casters, Crystal Laminate
top and laminated underside, and 17.5” (44.5 cm)
vertical adjustment.
Optional Counter Top Edge Guard
(CEG)
12
OSIT-1000 Crystal Laminate counter top without pull out tray.
OSIT-1001* Crystal Laminate counter top with pull out tray (not shown).
OSIT-2000 Frosty White Solid Surface counter top without pull out tray
(not shown).
OSIT-2001* Frosty White Solid Surface counter top with pull out tray.
*Stainless steel tray not included.
Optional IV Pole (OSIT-IV)
Optional High volume
evacuation tip holder (HVET)
MTI MTC Mobile
Treatment Cabinets
MTC
The MTI MTC Series of cabinets feature European
styling with appealing rounded side panel edges
and molded handles, premium industrial wood
components and Wilsonart Crystal color laminate
outside with melamine laminated inside.
European style drawer construction with metal
side/slides make the metal side and the slide of
the drawer one piece. In models with doors, the
MTC’s also employ quality European hardware for
wider opening.
The MTC doors and drawers are all constructed with
heavy molded edge guards for durability. Other
options are available such as lift up shelf, recessed
dirty instrument trays, drawer locks, and more.
MTC-1
MTC-A
Standard features include: Choice of 22” (55.9 cm)
deep or 18” (45.7 cm) deep counter top, four hard
rubber casters, laminate inside and out, European
drawer construction and hinge hardware, 3 mm
drawer/door edge molding, resilient counter top
edge guard, choice of Crystal or Black counter top
and backwall, and choice of one of MTI’s seven
Standard Laminate Cabinet colors for the doors
and drawers.
Optional drawer inserts also available (CDI-3 and CDI-4).
Crystal
Brittany Blue
Shadow
Grey
Sangaree
Light Beige
Dove Grey
MTC-B
13
MTI Options and Accessories
Patient Arm Management
As a patient is reclined, the arms
move with the patient eliminating
the need for readjustments.
MTI offers standard and premium patient IV and
patient arm management systems that can be
mounted to the chair three different ways: Floating
Arm™* mounted, seat rail mounted, and back rail
mounted.
The MTI Floating Arm™ system is a patented arm
system which helps eliminate the need for continual
IV and Patient arm readjustments. They avoid the arm
colliding with the chair should you actuate the auto
return function and forget to reposition the arms at
the conclusion of a procedure.
Arm Options
Choose one or more of the arms from one of the mounting types for your arm system.
Floating Arm™ Mounted Systems*
PA472-RF Patient Arm
MP702-RF Standard
8-way IV Arm
MPD702-RF Deluxe
8-way IV Arm
PA473-SBRF-RH Slide Back
Patient Arm, Right-hand
PA473-SBRF-LH Slide Back
Patient Arm, Left-hand
Seat Rail Mounted Systems
PA471-1 Patient Arm
14 *Patent no. 7862123
MP701 18” Standard 8-way
IV Arm
MPD701 18” Deluxe 8-way IV Arm
PAS-2 Patient Arm Sling (requires
PA471-1 Patient Arm)
Back Rail Mounted Systems
MP401 24” Standard 8-way
IV Arm
MPD401 24” Deluxe 8-way IV Arm
Control Options
Upgrade to a user-friendly programmable foot control.
Corded hand control
Dual back-mounted membrane switches
(OS428/429/430, 705/710, 724 models only)
Headrest Options
AH401-1 Oval Articulating
U-shaped Pillow (requires AH401-1)
AH405-1 Deep Oval Articulating
AH404-1 Rectangular Articulating
(forearm supports not available)
PH402-1 Prosthetic Articulating
Optional removable closed cell foam molded
forearm supports affords comfortable support
during chinning. Available on AH401-1, AH405-1
and PH402-1 headrests.
15
Additional Options and Accessories
BASE OPTIONS (MODELS 721, OS430 SERIES, AND 710/705 ONLY)
*Not available with a swivel base. ^Not available with a mobile base/casters
LBMCB Low-boy Mobile
CMB Mobile Base (adds
Caster Base (adds 0.75” [1.3
5.5” [14 cm] to height)*
cm] to height. Max width
increases to 30.75” [78.1 cm])*
FCSM Foot Control Mount
BSR430 Base Rails
MCC Mobile Caster
Cart (adds 1.5” [3.8 cm]
to height)*
IVBR Base-mounted IV Pole
Upholstery Options
SB 340-degree
Electronically-actuated
Swivel Base (adds 1.75”
[4.4 cm] to height)^
LC-4 Mobile Base (adds
3.75” [9.5 cm] to height)*
2” Leveling Glides (other
heights available)
2” Post Accessories
(Models 721, OS430 Series, 710/705 only)
A
B
Designer Upholstery
(Models 721/705/710 only)
Smooth Upholstery
(all models)
Ultra Plush (OS430
Series only)
C
D
Designer Upholstery
(Models 724/421E only)
16
Memory foam available in
standard, full-grain, or ultra
fabrics.
A: Post
Post-mounted
mounted LED Light; B: IV Pole; C: Patient
Monitor Tray; D: Flexible Mayo Tray.
Miscellaneous Accessories
A
B
C
Swing Up/Down Bed Rails
(Models 721, OS430 Series only)
340-degree Swivel Chair Top
(Models 723/724 only)
Syringe Bracket Holder
Leg Restraint Strap
A: Exam Light (available in LED or Halogen); B: IV Pole; C: Mayo Tray.
Lighting
Couple your MTI chair with
an ceiling or wall mounted, or
floor stand exam or surgery/
OR light. Dual-head and track
mounts are available for
most models as well as major
surgery lighting.
LED Surgery Light
AIM LED Surgery Light
AIM-100 Minor Surgery Light
LED Exam Light
AIM-50 Minor Surgery Light
CoolSpot II Spotlight
17
SPECIFICATIONS/DIMENSIONS
721^
Maximum Trendelenburg:
30º
Electrical Input/Power Consumption:
115/60, 3.5 amps
230/50, 1.75 amps
Shipping Weight†:
366 lbs. (166 kg)
Listed to the Safety Standards for Medical Electrical Equipment UL 60601-1, CSA-C22.2 60601-1, and IEC 60601-1

79 in (200.7 cm)*
BASE PLATE

20 in (50.5 cm)
30.5 in (77.5 cm)
21.5 in (54.6 cm)

SUGGESTED FLOOR OUTLET BOX LOCATION
721
 Chair width with Floating IV
and Patient arms. Maximum
width will depend on arm
selection: 27” to 32” (68.6 cm
to 81.3 cm)
 Chair width without arms

 Chair length with prosthetic
articulating headrest*§
§
50.75 in (129 cm)*
 Height from headrest
to floor
 Height from seat cushion
to floor
 Height from footrest to floor

*Headrest extensions adds
6” (15.2 cm)
19 in (48.3 cm) RETRACTED
35 in (89 cm) EXTENDED
SUGGESTED
FLOOR
OUTLET BOX
LOCATION
34.7 in (88.1 cm)
18
^Patent no. 7862123
†Weight will vary depending on options chosen.
12 in (31 cm)

§Height will vary depending on
headrest chosen and headrest
adjustment
Tapered Back Section:
OS428
20” tapering to 8” wide x 22” long
(50.8 cm tapering to 20.3 cm wide x 55.9 cm long)
OS429
22” tapering to 10” wide x 22” long
(55.9 cm tapering to 25.4 cm wide x 55.9 cm long)
OS430
24” tapering to 12” wide x 22” long
(60.9 cm tapering to 30.5 cm wide x 55.9 cm long)
Square Back Section:
OSS429
22” wide x 22” long (55.9 cm x 55.9 cm)
OSS430
24” wide x 22” long (70 cm x 55.9 cm)
Maximum Trendelenburg:
30º
Electrical Input/Power Consumption:
115/60, 4 amps
230/50, 2 amps
†
Shipping weight :
OS428
410 lbs (186 kg)
OS429
415 lbs (188 kg)
OS430
423 lbs (192 kg)
Listed to the Safety Standards for Medical Electrical Equipment UL 60601-1, CSA-C22.2 60601-1, and IEC 60601-1
SPECIFICATIONS/DIMENSIONS
OS428/429/430^

70 in (177.8 cm)*


34.0 in (86.5 cm)
24.0 in (61 cm)§
20 in (50.5 cm)
SUGGESTED FLOOR
OUTLET BOX
LOCATION
BASEPLATE
OS428/429/430
 Chair width with Floating IV and Patient arms. Maximum width
will depend on arm selection: 28” to 36” (71 cm to 91.4 cm)
 Chair width without arms§
*Headrest extensions adds 6” (15.2 cm)
§ Decrease width 2” (5 cm) for OS429 Chair and 4” (10.2 cm) for
OS428 Chair
 Chair length with deep oval articulating headrest
^Patent no. 7862123
†Weight will vary depending on options chosen.
19
SPECIFICATIONS/DIMENSIONS
OS428/429/430
 Height from headrest to floor
 Height from seat cushion to floor
*Headrest extensions adds 6” (15.2 cm)
**For High Model Chair, dimensions are
21” (53.3 cm) RETRACTED and 37” (94 cm)
EXTENDED
^ For High Model Chair, dimensions are
increased 2” (5 cm)

52 in (132 cm)*^§
§ Height will vary depending on headrest
chosen and headrest adjustment

19 in (48.3 cm) RETRACTED**
30.5 in (77.5 cm) EXTENDED**
SUGGESTED
FLOOR
OUTLET
LOCATION
34.7 in (88.1 cm)
20
Maximum Trendelenburg:
Model 710
30º
Model 705
Fixed 7º
Electrical Input/Power Consumption:
Model 710
115/60, 3.5 amps
230/50, 1.75 amps
Model 705
115/60, 2.5 amps
230/50, 1.25 amps
Shipping Weight†:
Model 710
363 lbs. (165 kg)
Model 705
373 lbs. (169 kg)
Listed to the Safety Standards for Medical Electrical Equipment UL 60601-1, CSA-C22.2 60601-1, and IEC 60601-1

76 in (194 cm)*
BASE PLATE

25.75 in (65.4 cm)
SPECIFICATIONS/DIMENSIONS
705/710


21.5 in (54.6 cm)
19 in (48.3 cm)
20 in (50.5 cm)
SUGGESTED FLOOR OUTLET BOX LOCATION
705/710
 Chair width with arms
 Width between arms
 Chair length with prosthetic
articulating headrest§
 Chair seat width
 Height from headrest to
floor
 Height from seat cushion
to floor

50.75 in (129 cm)*§
 Height from footrest to floor
*Headrest extensions adds
6” (15.2 cm)
§ Height will vary depending
on headrest chosen and
headrest adjustment

19 in (48.3 cm) RETRACTED
35 in (89 cm) EXTENDED
SUGGESTED
FLOOR
OUTLET
BOX LOCATION
12 in (31 cm)

34.7 in (88.1 cm)
†Weight will vary depending on options chosen.
21
SPECIFICATIONS/DIMENSIONS
724
Maximum Trendelenburg:
15º
Electrical Input/Power Consumption:
115/60, 3.5 amps
220/50, 1.75 amps
Shipping weight†:
353 lbs. (160 kg)
Listed to the Safety Standards for Medical Electrical Equipment UL 60601-1, CSA-C22.2 60601-1, and IEC 60601-1

64 in (162.6 cm)*^
BASE PLATE

25.75 in (65.4 cm)


19.5 in (49.5 cm)
19.0 in (48.3 cm)
23.5 in (59.7 cm)
SUGGESTED FLOOR OUTLET BOX LOCATION
724
 Chair width with arms
 Width between arms
 Chair length with prosthetic
articulating headrest*
 Chair seat width
 Height from headrest to floor
 Height from seat cushion to floor

52.0 in
*Headrest extensions adds
6” (15.2 cm)
(132.2 cm)*^§
**For High Model Chair, dimensions
are 21” (53.3 cm) RETRACTED and
37” (94 cm) EXTENDED
^For High Model Chair, dimensions
are increased 2” (5 cm)
§ Height will vary depending on
headrest chosen and headrest
adjustment

19 in (48.3 cm) RETRACTED**
30.5 in (77.5 cm( EXTENDED**
SUGGESTED
FLOOR
OUTLET BOX
LOCATION
23.5 in (59.7 cm)
22
†Weight will vary depending on options chosen.
Specifications
421E/401
39” (99.1 cm)
Minimum seat height:
19” (48.3 cm)
Vertical Rise:
8” (20.3 cm)
Overall Length:
Model 421E w/o headrest extension
72” (182.9 cm)
Model 401 w/o headrest extension
43” (109.2 cm)
Headrest extension:
23.75”
(60.3 cm)
Add 6” (15 cm)
Seat Width:
20” (50.8 cm)
Maximum width with arms:
26” (66 cm)
Electrical input/Power consumption:
115/60, 2.5 amps
Shipping Weight:
Model 421E
245 lbs. (111 kg)
Model 401
253 lbs. (115 kg)
30.5”/48.0”
(77.5 cm/121.9 cm)
Δ
TRC600 and TRC600XL
Maximum footprint length:
28.75” (73 cm)
26.5”/44.0”
(67.3 cm/111.8 cm)
76.5” (194.3 cm)
Seat Height:
21” (53 cm)
Seat Width:
TRC600
21” (53 cm)
TRC600XL
25” (63.5 cm)
Overall Height:
49” (125 cm)
MTC-A and MTC-1
Back Height:
31.5” (80 cm)
Overall Height (Counter top to floor):
Seat Depth:
20” (50.8 cm)
Overall Width:
Weight:
TRC600
94 lbs. (42.6 kg)
TRC600XL
111 lbs. (50.4 kg)
33.5” (85.1 cm)
24” (61 cm)
Cabinet Depth (Standard Model):
21” (53.3 cm)
Cabinet Depth (Slim Line Model):
18” (45.7 cm)
Shipping Weight:
199 lbs. (90 kg)
Weight Capacity:
275 lbs. (124.7 kg)Δ
TRC600
450 lbs. (204 kg)Δ
TRC600XL
Δ Bariatric mobile chair is available upon request.
OSIT and MTC Cabinet
MTC-B
Overall Height (Counter top to floor):
Overall Width:
41” (104.1 cm)
24” (61 cm)
Cabinet Depth (Standard Model):
21” (53.3 cm)
Cabinet Depth (Slim Line Model):
18” (45.7 cm)
Shipping Weight:
228 lbs. (103 kg)
For OSIT-2000 and 2001, size and height may vary slightly.
Shipping weight:
OSIT-1000
85 lbs. (39 kg)
OSIT-1001
92 lbs. (42 kg)
OSIT-2000
108 lbs. (49 kg)
OSIT-2001
114 lbs. (52 kg)
23
MADE IN U.S.A.
3655 W Ninigret Drive
Salt Lake City, Utah, 84104-6572
Toll-free 800-924-4655
Phone 801-875-4999
Fax 801-952-0548
www.mti.net
© MTI, Inc. All rights reserved.
MTI reserves the right to make any
product changes without notice.