Washing Machine
User manual
85-6,8
&/
%PDVNFOU/VNCFS=289
Please read this user manual first!
Dear Customer,
Thank you for prefering an %HNR product. We hope that you get the best results from your product which
has been manufactured with high quality and state-of-the-art technology. Therefore, please read this
entire user manual and all other accompanying documents carefully before using the product and keep
it as a reference for future use. If you handover the product to someone else, give the user manual as
well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between
models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
C
A
B
Important information or useful hints
about usage.
Warning for hazardous situations with
regard to life and property.
Warning for electric shock.
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
TABLE OF CONTENTS
1 Important instructions for safety and
environment
4
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4
1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .5
1.3 Children's safety. . . . . . . . . . . . . . . . . . . . . .5
1.4 Package information. . . . . . . . . . . . . . . . . . .6
1.5 Disposing of the waste product . . . . . . . . . . .6
1.6 Compliance with WEEE Directive . . . . . . . . . .6
5 Operating the product
18
5.1 Control panel . . . . . . . . . . . . . . . . . . . . . . .18
5.2 Preparing the machine . . . . . . . . . . . . . . . .19
5.3 Main programmes . . . . . . . . . . . . . . . . . . .20
5.4 Auxiliary function selection . . . . . . . . . . . . .22
6 Maintenance and cleaning
23
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Technical specifications . . . . . . . . . . . . . . . .8
6.1 Cleaning the detergent drawer . . . . . . . . . .23
6.2 Cleaning the body and control panel . . . . . .23
6.3 Cleaning the water intake filters . . . . . . . . .23
6.4 Draining remaining water and cleaning the
pump filter. . . . . . . . . . . . . . . . . . . . . . . .24
3 Installation
7 Troubleshooting
2 Your washing machine
7
9
25
3.1 Appropriate installation location. . . . . . . . . . .9
3.2 Connecting water supply. . . . . . . . . . . . . . . .9
3.3 Connecting to the drain. . . . . . . . . . . . . . . .10
3.3.1 Connecting to the drain without pump . . . . . 10
3.3.2 Connecting to the drain with pump. . . . . . . . 11
3.4 Adjusting the feet . . . . . . . . . . . . . . . . . . . .11
3.5 Electrical connection. . . . . . . . . . . . . . . . . .12
3.6 Connection of inlet hose connector and tap 12
3.7 Connecting to the water supply. . . . . . . . . . 13
3.8 Using detergent /softener and bleach nector 13
3.9 Put rat JXDUG into the machinH . . . . . . . . . . 13
4 Preparation
14
4.1 Sorting the laundry . . . . . . . . . . . . . . . . . . .14
4.2 Preparing laundry for washing. . . . . . . . . . .15
4.3 Things to be done for energy saving . . . . . .15
4.4 Correct load capacity . . . . . . . . . . . . . . . . .16
4.5 Loading the laundry . . . . . . . . . . . . . . . . . .16
4.6 Using detergent and softener . . . . . . . . . . .16
4.6.1 Advanced detergent drawer . . . . . . . . . . . . . 17
4.6.2 Simple detergent drawer . . . . . . . . . . . . . . . 17
3 / EN
1
Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons
whose physical, sensory or mental capabilities were not fully developed or
who lack experience and knowledge provided that they are supervised or
trained on the safe usage of the product and the risks it brings out. Children
must not play with the product. Cleaning and maintenance works should not
be performed by children unless they are supervised by someone.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
• If the product has a failure, it should not be operated unless it is repaired by
the Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after
a power interruption. If you wish to cancel the programme, see "Cancelling
the programme" section.
• Connect the product to a grounded outlet protected by a 6 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician. Our
company shall not be liable for any damages that will arise when the product
is used without grounding in accordance with the local regulations.
• The water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, there is the risk of water leakage.
• Never remove the filter while there is still water in the drum. Otherwise, risk of
flooding and injury from hot water will occur.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the
risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing
machines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning
and repairing procedures.
4 / EN
Washing Machine /User’s Manual
Important instructions for safety and environment
Ř Always have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorized
persons.
Ř If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similary qualified persons in order to avoid a hazard.
Ř If the power cable is damaged, it must be replaced by the manufacturer,
after sales service or a similarly qualified person (preferably an electrician) or
someone designated by the importer in order to avoid possible risks.
Ř Place the product on a rigid, flat and level surface.
Ř Do not place it on a long-pile rug or similar surfaces.
Ř Do not place the product on a high platform or near the edge on a cascaded
surface.
Ř Do not place the product on the power cable.
Ř Never use sponge or scrub materials. These will damage the painted, chrome
plated and plastic surfaces.
1.2 Intended use
Ř This product has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
Please do not put your finger
into gap between this cover and lid!
Ř The product must only be used for washing and rinsing of laundry that are
marked accordingly.
Ř The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
Ř The service life of your product is 10 years. During this period, original spare
parts will be available to operate the appliance properly.
1.3 Children's safety
Ř Packaging materials are dangerous to children. Keep packaging materials in a
safe place away from reach of the children.
Ř Electrical products are dangerous for the children. Keep children away from
the product when it is in use. Do not let them to tamper with the product. Use
child lock to prevent children from intervening with the product.
Washing Machine /User’s Manual
5 / EN
Important instructions for safety and environment
Ř Do not forget to close the lid when leaving the room where the product is
located.
Ř Store all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
Ř Children of less than 3 years should be kept away unless continuously
supervised.
1.4 Package information
Ř Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations. Do
not dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by
the local authorities.
1.5 Disposing of the waste product
Ř This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Therefore, do not dispose
the product with normal domestic waste at the end of its service life. Take it
to a collection point for the recycling of electrical and electronic equipment.
Please consult your local authorities to learn the nearest collection point. Help
protect the environment and natural resources by recycling used products. For
children's safety, cut the power cable and break the locking mechanism of the
lid so that it will be non-functional before disposing of the product.
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU).
This product bears a classification symbol for waste electrical
and electronic equipment (WEEE).
This product has been manufactured with high quality parts
and materials which can be reused and are suitable for
recycling. Do not dispose of the waste product with normal
domestic and other wastes at the end of its service life. Take
it to the collection center for the recycling of electrical and
electronic equipment. Please consult your local authorities to
learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/
EU). It does not contain harmful and prohibited materials specified in the
Directive.
6 / EN
Washing Machine /User’s Manual
2
Your washing machine
2.1 Overview
1
2
3
4
5
6
7
1- Drain hose
2- Loading door
3- Power cable
4- Detergent drawer
Washing Machine /User’s Manual
5- Control panel
6- Filter cap
7- Adjustable feet
7 / EN
Your washing machine
2.2 Technical specifications
Models (EN)
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total power (W)
Spin speed (rpm/ min., max.)
Main model code
:7/8.:
V ~/ 50Hz
750
991
Technical specifications may be changed without prior notice to improve the quality of the product.
Figures in this manual are schematic and may not match the product exactly.
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory
conditions in accordance with the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
8 / EN
Washing Machine /User’s Manual
3
Installation
Refer to the nearest Authorised Service Agent for
installation of the product. To make the product
ready for use, review the information in the user
manual and make sure that the electricity, tap
water supply and water drainage systems are
appropriate before calling the Authorized Service
Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements
carried out.
C
B
A
C
Preparation of the location and electrical,
tap water and waste water installations
at the place of installation is under
customer's responsibility.
WARNING: Installation and electrical
connections of the product must be
carried out by the Authorized Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorized
persons.
WARNING: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or crushed
while pushing the product into its place
after installation or cleaning procedures.
3.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place
it on a long pile rug or similar surfaces.
• Place the product on a solid and flat floor that
has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where
temperature may fall below 0ºC.
• Place the product at least 1 cm away from the
edges of other furniture.
Washing Machine /User’s Manual
3.2 Connecting water supply
C
C
A
A
The water supply pressure required to run
the product is between 1 to 10 bars (0.1
– 1 MPa). It is necessary to have 10 – 80
liters of water flowing from the fully open
tap in one minute to have your machine
run smoothly. Attach a pressure reducing
valve if water pressure is higher.
If you are going to use the double waterinlet product as a single (cold) water-inlet
unit, you must install the supplied stopper
to the hot water valve before operating the
product. (Applies for the products supplied
with a blind stopper group.)
WARNING: Models with a single water
inlet should not be connected to the hot
water tap. In such a case the laundry will
get damaged or the product will switch to
protection mode and will not operate.
WARNING: Do not use old or used water
inlet hoses on the new product. It may
cause stains on your laundry.
1. Connect the special hoses supplied with the
product to the water inlets on the product. Red
hose (left) (max. 90 ºC) is for hot water inlet,
blue hose (right) (max. 25 ºC) is for cold water
inlet.
WARNING: Ensure that the cold and
A
hot water connections are made correctly
when installing the product. Otherwise,
your laundry will come out hot at the end
of the washing process and wear out.
2. Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
3. Open the taps completely after making the
hose connection to check for water leaks at
the connection points. If any leaks occur, turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
water leakages and damages caused by them,
keep the taps closed when the machine is not
in use.
9 / EN
Installation
3.3 Connecting to the drain
Ř The end of the drain hose must be directly
connected to the wastewater drain or to the
washbasin.
WARNING: Your house will be flooded
if the hose comes out of its housing
during water discharge. Moreover, there
is risk of scalding due to high washing
temperatures! To prevent such situations
and to ensure smooth water intake and
discharge of the machine, fix the end
of the discharge hose tightly so that it
cannot come out.
10 / EN
Washing Machine /User’s Manual
Installation
3.3.2 Connecting to the drain with pump
Ř The hose should be attached to a height of at
least cm, and 100 cm at most.
Ř In case the hose is elevated after laying it on
the floor level or close to the ground (less than
80 cm above the ground), water discharge
becomes more difficult and the laundry may
come out excessively wet. Therefore, follow the
heights described in the figure.
3.4 Adjusting the feet
Ř The two front feet of washing machine can
adjust the positive, when the washing machine
is not level, you can up the front of washing
machine for a little, then left or right rotation to
adjustable the feet, make it level.You can check
the level by the help of the indicator on top
cover.
Ř To prevent flowing of dirty water back into the
machine and to allow for easy discharge, do not
immerse the hose end into the dirty water or do
not drive it in the drain more than 15 cm. If it is
too long, cut it short.
Ř The end of the hose should not be bent, it
should not be stepped on and the hose must
not be pinched between the drain and the
machine.
Ř If the length of the hose is too short, use it by
adding an original extension hose. Length of the
hose may not be longer than 3.2 m. To avoid
water leak failures, the connection between
the extension hose and the drain hose of the
product must be fitted well with an appropriate
clamp as not to come off and leak.
Washing Machine /User’s Manual
Adjusting foot by checking leveler.
Ř Remarking : there may be no leveler for some
types machine.
11 / EN
Installation
3.5 Electrical connection
Connect the product to a grounded outlet
protected by a 6 A fuse. Our company shall not
be liable for any damages that will arise when the
product is used without grounding in accordance
with the local regulations.
• Connection must comply with national
regulations.
• Power cable plug must be within easy reach
after installation.
• If the current value of the fuse or breaker in
the house is less than 6 Amps, have a qualified
electrician install a 6 Amp fuse.
• The voltage specified in the "Technical
specifications" section must be equal to your
mains voltage.
• Do not make connections via extension cables
or multi-plugs.
B
WARNING: Damaged power cables
must be replaced by the Authorized
Service Agents.
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply
connections.
3. Drain all water that has remained in the
product.
4. Install all styrofoams and then pcakage the
machine.
A
12 / EN
3.6 Connection of inlet hose
connector and tap
1. Tighten all hose nuts by hand. Never use a tool
when tightening the nuts.
2. Open the taps completely after making the
hose connection to check for water leaks at
the connection points. If any leaks occur, turn
off the tap and remove the nut. Retighten the
nut carefully after checking the seal. To prevent
water leakages and damages caused by them,
keep the taps closed when the machine is not
in use.
WARNING: Packaging materials are
dangerous to children. Keep packaging
materials in a safe place away from
reach of the children.
Washing Machine /User’s Manual
Installation
3.7 Connecting to the water supply
Important:
Ř The water supply pressure required to run the
machine must be 1-10 bar (0,1 – 1 MPa).
Ř Connect the special hoses supplied with the
machine to the water intake valves on the
machine.
3.9 Put UDWJXDUG into the machine
If you want to put UDWJXDUG into the machine ,
you should take the screw out ,then assemble rat
JXDUG into the machine ,the last step is putting the
screw to fix the UDWJXDUG .
(a)
Ř Applies for the products supplied with a blind
stopper group.
Ř Models with a single water inlet should not be
connected to the hot water tap.
Ř When returning the appliance to its place after
maintenance or cleaning, care should be taken
not to fold, squeeze or block the hoses.
(b)
3.8 Using detergent /softener
and bleach nector
When using detergent, softener, starch, fabric dye,
bleachor limescale remover read the PDQXIDFWXUHU’s
instruction the package carefully and follow
the suggested dosagevalues. Use measuring cup
if available.
1
3
2
Type1
1
2
(c)
Type1:
1.for laundry detergent
2.for softener
3.for bleach
Type2:
1.for laundry detergent
2.for bleach
Type2
1
2
Type3
Washing Machine /User’s Manual
Type3:
1.putting laundry
detergent into drum
directly
2.for bleach
13 / EN
4
Preparation
4.1 Sorting the laundry
• Sort laundry according to type of fabric, colour, and degree of soiling and allowable water
temperature.
• Always obey the instructions given on the garment tags.
WASH
Water
Temperatures
Maximum
950C
700C
600C
500C
400C
300C
Symbol(s)
zzz
zzz
zzz
zz
zz
zz
zzz
zz
z
Drying
Symbols
Suitable for
dryer
No Iron
Sensitive /
Delicate dry
Do not dry
with dryer
No Spin
Hand wash
SensitiveDelicate
wash
No Iron
Normal wash
Machine
Wash
Symbols
Not washable
LAUNDRY WASH SYMBOLS
Do not dry
Do not dryclean
Dry-cleanable
Lay in shadow
to dry
Hang wet to dry
Lay to dry
Hang to dry
Without heating
At low temperature
At medium
temperature
Drying
Settings
At high temperature
At any temperature
DRYING
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
200 0C
150 0C
110 0C
Bleach (sodium
hypochlorite)
can be used
Bleach is not
allowed
Maximum temperature
All bleaches are allowed
BLEACH
14 / EN
Iron without
steam
IRON
Dry or Steam
Do not iron
Iron -
Only bleaches without
chlorine are allowed
Washing Machine /User’s Manual
Preparation
4.2 Preparing laundry for washing
• Laundry items with metal attachments such as,
underwired bras, belt buckles or metal buttons
will damage the machine. Remove the metal
pieces or wash the clothes by putting them in a
laundry bag or pillow case.
• Take out all substances in the pockets such as
coins, pens and paper clips, and turn pockets
inside out and brush. Such objects may damage
the product or cause noise problem.
• Put small size clothes such as infant's socks
and nylon stockings in a laundry bag or pillow
case.
• Place curtains in without compressing them.
Remove curtain attachment items.
• Fasten zippers, sew loose buttons and mend
rips and tears.
• Wash “machine washable” or “hand washable”
labeled products only with an appropriate
programme.
• Do not wash colours and whites together. New,
dark coloured cottons release a lot of dye. Wash
them separately.
• Tough stains must be treated properly before
washing. If unsure, check with a dry cleaner.
• Use only dyes/colour changers and limescale
removers suitable for machine wash. Always
follow the instructions on the package.
• Wash trousers and delicate laundry turned
inside out.
• Keep laundry items made of Angora wool in the
freezer for a few hours before washing. This will
reduce pilling.
• Laundry that are subjected to materials such as
flour, lime dust, milk powder, etc. intensely must
be shaken off before placing into the machine.
Such dusts and powders on the laundry may
build up on the inner parts of the machine in
time and can cause damage.
Washing Machine /User’s Manual
4.3 Things to be done
for energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
• Operate the product in the highest capacity
allowed by the programme you have selected,
but do not overload; see, "Programme and
consumption table".
• Always follow the instructions on the detergent
packaging.
• Wash slightly soiled laundry at warm or cold
water..
• Use faster programmes for small quantities of
lightly soiled laundry.
• Do not use soaking and hot water for laundry
that is not heavily soiled or stained.
• If you plan to dry your laundry in a dryer, select
the longer spin time recommended during
washing process.
• Do not use detergent in excess of the amount
recommended on the detergent package.
15 / EN
Preparation
4.4 Correct load capacity
4.6 Using detergent and softener
The maximum load capacity depends on the type
of laundry, the degree of soiling and the washing
programme desired.
The machine automatically adjusts the amount
of water according to the weight of the loaded
laundry.
Detergent, softener and other cleaning agents
• Add detergent and softener before starting the
washing programme.
• Never leave the detergent drawer open while
the washing programme is running!
• Place the detergent bag or the dispensing ball
directly among the laundry in the machine if
you use them.
A
WARNING: Follow the information in the
“Programme and consumption table”.
When overloaded, machine's washing
performance will drop. Moreover, noise
and vibration problems may occur.
Laundry type
Bathrobe
Napkin
Duvet cover
Bed Sheet
Pillowcase
Tablecloth
Towel
Hand towel
Evening gown
Underclothing
Men’s overalls
Men’s shirt
Men’s pajamas
Blouses
Weight (g)
1200
100
700
500
200
250
200
100
200
100
600
200
500
100
4.5 Loading the laundry
1. Open the lid.
2. Place laundry items loosely into the machine.
3.Close the lid and; Ensure all loads inside well
distributed.
WARNING: In case of misplacing the
A
16 / EN
laundry, noise and vibration problems may
occur in the machine.
Choosing the detergent type
The type of detergent to be used depends on the
type and colour of the fabric.
• Use different detergents for coloured and white
laundry.
• Wash your delicate clothes only with special
detergents (liquid detergent, wool shampoo,
etc.) used solely for delicate clothes.
• Wash woolens with special detergent made
specifically for woolens.
WARNING: Use only detergents
A
manufactured specifically for washing
machines.
WARNING: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used
depends on the amount of laundry, the degree of
soiling and water hardness.
• Pour the detergent into the main wash
compartment of the detergent drawer. If your
machine is without detergent drawer, pour the
detergent directly over the laundry in the tub.
• Do not use amounts exceeding the dosage
quantities recommended on the detergent
package to avoid problems of excessive foam,
poor rinsing, financial savings and finally,
environmental protection.
• Use less detergent for small amounts or lightly
soiled clothes.
Washing Machine /User’s Manual
Preparation
Using softeners
Pour the softener into the softener compartment
of the detergent drawer. If your machine is without
detergent drawer or with simple detergent drawer
(detergent drawer that does not include softener
department) softener can be put at the dedicated
compartment on the balance ring.
Ř'RQRWH[FHHGWKH!PD[OHYHOPDUNLQJLQWKH
softener compartment.
Ř,IWKHVRIWHQHUKDVORVWLWVfluidity, dilute it with
water before putting it in the detergent drawer.
Using bleaches
Ř Add the bleaching agent to the dedicated
FRPSDUWPHQWRQWKHWRSFRYHr.
Ř'RQRWXVHEOHDFKLQJagent and detergent by
PL[LQJWKHP
Ř8VHMXVWDOLWWOHDPRXQWRIEOHDFKLQJagent
DQGULQVHWKHFORWKHVYHry well as it causes
VNLQLUULWation.'RQRWSRXUWKHEOHDFKLQJagent
onto the clothes and do not use it for coloured
clothes.
4.6.1 Advanced detergent drawer
Using liquid detergent
The detergent drawer is composed of three
Ř/LTXLGGHWHUJHQWVWDLQV\RXUFORWKHVZKHQXVHG compartments:
ZLWK'HOayed Start function. If you are going to
– (1) for main wash
XVHWKH'HOayed Start function,GRQRWXVHOLTXLG – (2) for softener
detergent.
– (*) in addition, there is siphon piece in the
softener compartment.
Using gel and tablet detergent
Apply the following instructions when using tablet,
(*)
gel and similar detergents.
Ř,IWKHJHOGHWHUJHQWWKLFNQHVVLVfluidal, put the
(1)
(2)
gel detergent into the main wash detergent
compartment during first waWHULQWDNH
Ř,IWKHJHOGHWHUJHQWWKLFNQHVVLVQRWfluidal or in
the shape of caSVXOHOLTXLGWablet, put it directly
into the drum before washing.
Ř3XWWablet detergents into the main wash
compartment or directly into the drum before
washing.
4.6.2 Simple detergent drawer
Tablet detergents may leaYHUHVLGXHV
This detergent drawer has one compartment
in the detergent compartment. If you
– (1) for main wash
encounter such a case, place the tablet
detergent between the laundry, close to the
lower part of the drum in future washings.
Using starch
Ř $GGOLTXLGVWDUFK, powder starch or the fabric
dye into the softener compartment.
Ř'RQRWXVHVRIWHQHUDQGVWDUFKWRJHWKHULQD
washing cycle.
Ř Wipe the inside of the machine with a damp
and clean cloth after using starch.
Washing Machine /User’s Manual
(1)
17 / EN
5
Operating the product
5.1 Control panel
9
1
2
8
7
1
2
3
4
5
6
7
8
9
18 / EN
6
5
4
3
- On / Off button
- Start / Pause button
- Air Turbo button
- Auxiliary Function button
- Water Level button
- Delayed Start Time button
- Water Supply button
- Function button
- Remaining Time / Delay Start Time / Error Display
Washing Machine /User’s Manual
2SHUDWLQJWKHSURGXFW
3UHSDULQJWKHPDFKLQH
7LPH
Figures in this manual are schematic and
may not match the product exactly.
7LPH(UURU
Displays the remaining
wash time. Displays the
reserved delay start time.
Displays the error state if
a problem occurs in the
washing machine so that
you can take action.
3RZHU%XWWRQ
Press this button once to
operate. Press it again to
turn the power off.
7LPH%XWWRQ
3DXVH%XWWRQ
Use to pause and restart
the operation. To change
the washing procedure
during an operation,
press this button to stop,
and again to restart after
changing the procedure.
Each time the button is
pressed, the washing
program changes.
ō WDWHU6XSSO\%XWWRQ237,21
Each time this button is
pressed, the type of water
is selected as follows,
Cold / Hot / Warm
Cold: No light
Warm: Red light
Hot: Flashin red light
Washing Machine /User’s Manual
Adjusts delay start time.
max. 18 h
W
The water level is
automatically adjusted.
However, you can select
the water level manually
by pressing this button.
The water level button
only can be active during
standby status, water level
can be changed before
start to running; and you
can press the start/pause
button then change water
level while machine is
running, press start/pause
again back to work after
finish water level setting.
Displays selected
program’s default water
level.
Low /
19 / EN
Operating the product
With every press of this
button, the function
changes.
T
Press this button to speed
dry your laundry.
This function can only be
selected if a spin cycle
is set.
The air Turbo button only
can be active during
standby status, this
function can be changed
before start to running;
and you can press
the start/pause button
then change time while
machine is running, press
start/pause again back
to work after finish water
level setting.
This is a device to protect
children from being
accidentally hurt while
playing with the washer.
- Press the “Water level” button and ‘’Function’’
button at the same time for 3 sec.
- If Child Lock function is activated, ‘’CL’’ will be
written in the display for 3 sec.
To release the function of Child-Lock: In case
the “Child-Lock” is programmed, press both
the “Water level” and “Function” buttons at the
same time.
Rinse hold will be selectable
from 'air dry' function
button.2 LED's will be ON
together during rinse hold
selection.
After the last rinse, water
will not drain out. It will be
kept in the machine.
Machine pause at the step,
and led1 and led2 always
blink.
When the customer wants
to drain the water, he
press the pause start butt n
again to continue spin with
default time.
20 / EN
Washing Machine /User’s Manual
Operating the product
5.3 Main programmes
Depending on the type of fabric, use the following
main programmes.
High water and 3 min air turbo options are set
automatically in this wash course.
Figures in this manual are schematic and
may not match the product exactly.
Auto
This programme selects the best water level
and wash course automatically depending on
the amount of laundry. Use this programme for
washing cotton and blended items.
This programme is suitable for washing bulky
laundry items such as blankets and bed sheets.
Fold the bulky items in a suitable manner
before placing in the wash basket. Loading
recommendation: max 1/2 of the full capacity.
This programme is suitable for washing less
amount (e.g. max 1/3 of the full capacity) of
lightly/daily soiled laundry in short time using
minimum amount of water.
Use this programme on a regular basis (e.g. once
in a month) to sanitize and clean your machine
and to prevent unwanted odours. Do not place
any items or laundry in the machine when you
use this programme, it must be operated when
the washer is empty otherwise laundry or washer
might be damaged. You can add a special
purpose detergent suitable for cleaning machines.
Washing Machine /User’s Manual
Delicate
Use this programme for washing machine
washable delicate (cotton, blended and wool)
items such as sweaters, jumpers and cardigans.
Hot water and soaking options can not be selected
in this wash course. It is recommended to use
special purpose detergents suitable for washing
delicate laundry. Loading recommendation: max
1/3 of the full capacity.
Normal
This programme is suitable for washing up to a
full capacity of normally soiled durable cotton and
blended clothes.
This programme is suitable for washing up to a
full capacity of lightly/daily soiled durable cotton
and blended clothes.
This programme is suitable for washing up to a
full capacity of heavily soiled durable cotton and
blended clothes. Soaking and hot water functions
are set automatically in this wash course.
21 / EN
Operating the product
5.4 Auxiliary function selection
Figures in this manual are schematic and
may not match the product exactly.
ōWash
ō6RDNLQJ
Select this function if you like to wash your
laundry by soaking. Soaking is recommended for
heavily soiled laundry items. You can add your
normal amount of detergent and start the wash
programme by selecting this function. Soaking is
not selectable in Eco, Fuzzy, Tub clean and Wool
programmes.
ō5LQVH
Use this programme when you want to rinse or
starch separately.
ō6SLQ
Use this programme to apply an additional spin
cycle for your laundry or to drain the water in the
machine.
22 / EN
Washing Machine /User’s Manual
Operating the product
5.5 Programme and consumption table
Program Load(kg)
Blanket
Blanket
Blanket
Blanket
Blanket
Blanket
Blanket
Blanket
Eco
Eco
Eco
Eco
Auto
Heavy
Heavy
Heavy
Heavy
Heavy
Heavy
Heavy
Heavy
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Tub clean
Delicate
Delicate
Delicate
Delicate
Delicate
Delicate
Delicate
Delicate
Quick
3
2
1
0.5
2
1
0.5
—
max
5
4
3.5
3
2
1
0.5
max
5
4
3.5
3
2
1
0.5
—
3
2
1
0.5
1.5
Water
Functions
level S/W/R/S W/R/S Spin R/S
8
7
6
5
4
3
2
1
4
3
2
1
—
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
8
8
7
6
5
4
3
2
1
3
W/R
Air turbo
Duration
Wash 15min 30min (min)
62
60
57
55
52
49
47
44
34
31
29
26
—
92
90
88
85
83
80
78
75
60
58
55
53
50
47
45
42
64
42
40
37
35
32
29
27
24
20
ͻ : Selectable
* : Automa cally selected, no canceling.
Auxiliary func ons
So:Soaking
W:Wash
R:Rinse
Sp:Spin
The auxiliary functions in the table may vary according to the model of your machine.
Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
Washing Machine /User’s Manual
23 / EN
6
Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
6.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every 4-5 washing cycles) as shown below
in order to prevent accumulation of powder
detergent in time.
6.2 Cleaning the body
and control panel
Wipe the body of the machine with soapy water or
non-corrosive mild gel detergents as necessary,
and dry with a soft cloth.
Use only a soft and damp cloth to clean the
control panel.
6.3 Cleaning the water intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at the
end of each water intake hose where they are
connected to the tap. These filters prevent foreign
substances and dirt in the water to enter the
washing machine. Filters should be cleaned as
they do get dirty.
1. Close the taps.
2. Remove the nuts of the water intake hoses to
access the filters on the water intake valves.
Clean them with an appropriate brush. If the
filters are too dirty, take them out by means of
pliers and clean them.
3. Take out the filters on the flat ends of the water
intake hoses together with the gaskets and
clean thoroughly under running water.
4. Replace the gaskets and filters carefully in their
places and tighten the hose nuts by hand.
1.Detergent drawer is closed.
2. Pulling detergent drawer to the front side.
3. Turning detergent drawer to upper side,
and taking drawer out.
Cleaning detergent drawer by water.
24 / EN
Washing Machine /User’s Manual
Maintenance and cleaning
6.4 Draining remaining water
and cleaning the pump filter
The filter system in your machine prevents solid
items such as buttons, coins and fabric fibers
clogging the pump impeller during discharge of
washing water. Thus, the water will be discharged
without any problem and the service life of the
pump will extend.
If the machine fails to drain water, the pump filter
is clogged. Filter must be cleaned whenever it
is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.
In addition, prior to transporting the machine
(e.g., when moving to another house) and in case
of freezing of the water, water may have to be
drained completely.
b. Loosen pump filter (anticlockwise) until water
starts to flow. Fill the flowing water into the
container you have placed in front of the filter.
Always keep a piece of cloth handy to absorb
any spilled water.
c. When the water inside the machine is finished,
take out the filter completely by turning it.
4. Clean any residues inside the filter as well as
fibers, if any, around the pump impeller region.
5. Install the filter.
6.4 Cleaning the fuzz collector
1.push to take the filter out.
WARNING: Foreign substances left
in the pump filter may damage your
machine or may cause noise problem.
In order to clean the dirty filter and discharge
the water:
1. Unplug the machine to cut off the supply power.
2. Open the filter cap.
Press the tab on the filter cap to the left side
and pull the cover out towards yourself.
2.Open the filter and cleaning. Keep the
filter rubber in the original position.
filter cover
rubber
3.After cleaning assemble the filter on the
right position.
a. Place a large container in front of the filter to
catch water from the filter.
Washing Machine /User’s Manual
25 / EN
7
Troubleshooting
Problem
The power is cut off.
Check & Solution
- Is the electric voltage normal?
- Is the washer plugged in? Plug in the electric cord.
- Is the drain hose down? Put the drain hose down.
Water does not drain. - Is the drain hose folded? Unfold the drain hose.
- Is the drain hose outlet clogged? Remove the waste cleanly.
Washing machine
won’t work.
If the drain hose,
water tap and
drum are frozen,
do as follows.
The water does not
drain out
immediately.
- Is the washer lid open? Close the lid.
- Is the Pause button on? Press the Start/Pause button one more time and check if the
washer starts.
- Is enough water filled to the water level?
- If the water pressure is low, it takes a long time to start washing.
- Is the tap closed? Open the tap to supply water.
- Add hot water to the frozen water tap and remove the drain hose. Soak into hot water.
- Pour hot water into the drum for about 10 minutes.
- Put a hot water towel on the drain hose connector.
- If the drain hose defrosts, connect again and check for proper water draining.
- The drain is clogged with coins or pins. The drain hose is hung over the drain hose
hook.
- Half fill the drum with water and try for spinning again.
The water leaks at
the water supply
hose connector.
- If the connecting part is loose, water may leak. Repeat the assembling steps again.
(Refer to “Connection of inlet hose connector and tap” and “Connecting to the water
supply”)
- Is the water supply hose folded? Unfold the hose.
- If the water supply is too strong, water may leak. Close the tap a little.
- Is water leaking from the tap itself? Fix the tap.
Water is not supplied
- Did you press the Start/Pause button after selecting the water supply?
If the Start/Pause button is not pressed, water is not supplied. Press the Start/Pause button.
- Is the tap closed? Turn on the tap.
- Is the filter net at the water supply hose connector clogged with dirty matters? Clean
the filter net by brushing with a toothbrush.
- Is the water supply cut off? If the water supply is suspended, turn off the tap and power
off.
- Check if the laundry is spread evenly in the washer. Spread out the laundry evenly and
start again.
Spinning makes loud - Check if the washing machine levels on a sturdy flat floor. Set the machine at level.
noises and vibrations. Adjust the feet for leveling.
- Is around the washing machine filled with unnecessary stuffs? Remove those
unnecessary things away from the wash machine.
WARNING: If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product
yourself.
26 / EN
Washing Machine /User’s Manual
Troubleshooting
Error
Message
Error
Control
E1
Water intake over time
- Is the water tap shut off?
- Is the water supply cut off ?
- Is the water supply hose punctured ?
- Is the tap or water supply hose frozen ?
- Is the water pressure low or is the filter of the inlet valve
clogged with impurities?
- Is the Hot hose connected to cold?
- Is the Cold hose connected to hot?
E2
Water pumping over time
- Is the drain hose positioned correctly?
- Is the drain hose bent or placed too high?
- Is the internal part of the hose or drain pump (only pump
model) clogged with impurities?
E3
Unbalance
- Is the laundry evenly balanced?
- Is the washing machine placed on a flat surface?
E4
Over flow
- Please call your nearest service center for help.
E5
Frequency out of range
- Please call your nearest service center for help.
E6
Door open
- Is the lid closed?
WARNING: If you cannot eliminate the problem although you follow the instructions in this section,
consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product
yourself.
Washing Machine /User’s Manual
27 / EN
www.beko.com.tr