Industrial Ethernet Solutions
IKS-6726A/6728A Series
24+2G/24+4G-port modular managed Ethernet switches
››2/4 Gigabit plus 24 Fast Ethernet ports for copper and fiber
››Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
››Isolated redundant power inputs with universal 24/48 VDC or
110/220 VAC power supply
››Modular design lets you choose from a variety of media
combinations
››-40 to 75°C operating temperature range
››Supports MXstudio for easy, visualized industrial network
management
››V-ON™ ensures millisecond-level multicast data and video
network recovery
APPROVED
P R
O D U C T
Introduction
The IKS-6726A/6728A series of industrial rackmount Ethernet switches
are designed to meet the rigorous demands of mission critical
applications for industry and business, such as traffic control systems
and maritime applications. The IKS-6726A/6728A’s Gigabit and fast
Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VAC
dual isolated redundant power supplies increase the reliability of your
communications and save on cabling and wiring costs. The modular
design of the IKS-6726A/6728A also makes network planning easy,
and allows greater flexibility by letting you install up to 4 Gigabit ports
and 24 fast Ethernet ports.
Features and Benefits
• Command Line Interface (CLI) for quickly configuring major
managed functions
• Software-based IEEE 1588 PTPv2 (Precision Time Protocol) for
time synchronization of networks
• DHCP Option 82 for IP address assignment with different policies
• Support EtherNet/IP and Modbus/TCP protocols for device
management and monitoring
• Compatible with EtherNet/IP and PROFINET protocols for
transparent data transmission
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250
switches), RSTP/STP, and MSTP for network redundancy
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
• QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
• IEEE 802.3ad, LACP for optimum bandwidth utilization
• TACACS+, IEEE 802.1X, SNMPv3, HTTPS, and SSH to enhance
network security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for efficient network monitoring and proactive capability
• Bandwidth management prevents unpredictable network status
with “Lock port” to restrict access to authorized MAC addresses
• Port mirroring for online debugging
• Automatic warning by exception through email, relay output
• Automatic recovery of connected device’s IP addresses
• Line-swap fast recovery
• Configurable by web browser, Telnet/serial console, CLI, Windows
utility, and ABC-02-USB automatic backup configurator
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
1
Modular Rackmount Ethernet Switch System,
IKS-6726A/6728A
IKS-6726A-2GTXSFP
IKS-6726A
IKS-6728A-4GTXSFP
IKS-6728A
w w w. m o x a . c o m
Industrial Ethernet Solutions
Software Features
Management: IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM,
RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP,
SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back
Pressure Flow Control
Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP
Redundancy Protocols: STP, RSTP, MSTP, Turbo Ring v1/v2, Turbo
Chain, Link Aggregation
Security: RADIUS, TACACS+, SSL, SSH, Broadcast Storm Protection,
Port Lock
Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP
(software-based)
Industrial Protocols: EtherNet/IP, Modbus/TCP
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Switch Properties
Priority Queues: 4
Max. Number of VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 2048
MAC Table Size: 16 K
Packet Buffer Size: 12 Mbit
Jumbo Frame Size: 9.6 KB
Interface
Fast Ethernet: 8-port 10/100Base T(X) and 2 modular slots for any
8-port or 6-port Interface Modules with 10/100BaseT(X), 100BaseFX
(SC/ST connector), or 100Base SFP
Note: See the IM-6700A datasheet for Fast Ethernet module product information.
Gigabit Ethernet: 2- or 4-port 10/100/1000BaseT(X) or 100/1000Base
SFP
Console Port: USB-serial console (Type B connector)
Storage Port: USB storage (Type A connector for ABC-02-USB)
Alarm Contact: 1 relay output with current carrying capacity of 3 A @
30 VDC or 3 A @ 240 VAC
Power Requirements
Input Voltage:
• 24 VDC models: 24 VDC
• 48 VDC models: 48 VDC
• HV models: 110/220 VAC
Operating Voltage:
• 24 VDC models: 18 to 36 VDC
• 48 VDC models: 36 to 72 VDC
• HV models: 85 to 264 VAC
Input Current: (without IM-6700A modules installed)
• Max. 0.36 A @ 24 VDC
• Max. 0.19 A @ 48 VDC
• Max. 0.28/0.14 A @ 110/220 VAC
Overload Current Protection: Present
Reverse Polarity Protection: Present
Physical Characteristics
IP Rating: IP30 protection
Dimensions: 440 x 44 x 280 mm (17.32 x 1.37 x 11.02 in)
Weight: 4100 g (9.05 lb)
Installation: 19-inch rack mounting
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 55022/24
EMI: CISPR 22, FCC Part 15B Class A
EMS:
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
Rail Traffic: EN 50121-4
Marine: DNV, GL, LR, ABS, NK
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time:
IKS-6726A: 149,151 hrs
IKS-6728A: 148,687 hrs
Standard: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
280 (11.02)
IKS-6726A-2GTXSFP Series
Rear View
440 (17.33)
Front View
2
Top View
44 (1.73)
Side View
w w w. m o x a . c o m
Industrial Ethernet Solutions
Dimensions
Unit: mm (inch)
280 (11.02)
IKS-6728A-4GTXSFP Series
Rear View
440 (17.33)
Front View
44 (1.73)
Top View
Side View
Ordering Information
Step 1: Select Ethernet switch system
Step 2: Select interface modules
Note: The IKS-6726A/6728A Ethernet switch system is delivered without interface
modules. See the IM-6700A datasheet to determine which interface modules are suitable for your application.
IM-6700A modules
(Fast Ethernet)
IKS-6726A/6728A with
power supply
IKS-6726A/6728A Modular Rackmount Ethernet Switch System
Modular managed rackmount Ethernet switch with 8 fixed 10/100BaseT(X) ports, 2 or 4 Gigabit Copper/SFP combo ports, and 2 slots for Fast Ethernet
modules. Support up to 24+4G ports, -40 to 75°C operating temperature.
Available Models
Port Interface
HV (85 to 264 VAC)
48 VDC
24 VDC
HV (85 to 264 VAC)
48 VDC
24 VDC
IKS-6726A Series
IKS-6726A-2GTXSFP-HV-T
IKS-6726A-2GTXSFP-HV-HV-T
IKS-6726A-2GTXSFP-24-T
IKS-6726A-2GTXSFP-24-24-T
IKS-6726A-2GTXSFP-48-T
IKS-6726A-2GTXSFP-48-48-T
IKS-6728A Series
IKS-6728A-4GTXSFP-HV-T
IKS-6728A-4GTXSFP-HV-HV-T
IKS-6728A-4GTXSFP-24-T
IKS-6728A-4GTXSFP-24-24-T
IKS-6728A-4GTXSFP-48-T
IKS-6728A-4GTXSFP-48-48-T
Isolated Power Supply 2
100BaseSFP*
(-40 to 75 °C)
Isolated Power Supply 1
100BaseFX
Front Cabling, Wide Temperature
Power Supply
Fast Ethernet
10/100BaseT(X)
Gigabit Ethernet
2
Up to 24
Up to 12
Up to 18
1
–
–
–
–
–
2
Up to 24
Up to 12
Up to 18
1
–
–
1
–
–
2
Up to 24
Up to 12
Up to 18
–
–
1
–
–
–
2
Up to 24
Up to 12
Up to 18
–
–
1
–
–
1
2
Up to 24
Up to 12
Up to 18
–
1
–
–
–
–
2
Up to 24
Up to 12
Up to 18
–
1
–
–
1
–
4
Up to 24
Up to 12
Up to 20
1
–
–
–
–
–
4
Up to 24
Up to 12
Up to 20
1
–
–
1
–
–
4
Up to 24
Up to 12
Up to 20
–
–
1
–
–
–
4
Up to 24
Up to 12
Up to 20
–
–
1
–
–
1
4
Up to 24
Up to 12
Up to 20
–
1
–
–
–
–
4
Up to 24
Up to 12
Up to 20
–
1
–
–
1
–
10/100/1000 BaseT(X)
or 100/1000BaseSFP*
Note: The IKS-6726A/6728A series supports 100BaseSFP and 100/1000BaseSFP slots. See the SFP-1G and SFP-1FE datasheets for SFP module product information.
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, 500, 1000, or 2000 nodes
EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices
ABC-02-USB: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C
operating temperature
Power Cords: See Appendix A for details
3
Package Checklist
•
•
•
•
•
•
•
•
IKS-6726A or IKS-6728A switch
AC power cord (HV model only)
Protective caps for unused ports
2 rackmount ears
USB cable (Type A male to Type B male)
Documentation and software CD
Hardware installation guide (printed)
Warranty card
w w w. m o x a . c o m
Industrial Ethernet Solutions
IM-6700A Series
Fast Ethernet modules for IKS-6726A-2GTXSFP/IKS-6728A-4GTXSFP/
IKS-6728A-8PoE-4GTXSFP series switches
Specifications
Fast Ethernet Interface Modules, IM-6700A series
IM-6700A-8TX
IM-6700A-8SFP*
IM-6700A-2MSC4TX
IM-6700A-2SSC4TX
IM-6700A-2MST4TX
Interface
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST or SFP LC connector)
PoE Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection, IEEE 802.3af/at standards,
Mode A
Optical Fiber
Wavelength
Optical
Power
IM-6700A-4MST2TX
OM1
50/125 μm
800 MHz*km
4 km
5 km
Power Requirements
Power Consumption:
IM-6700A-8TX: 1.21 W
IM-6700A-8PoE: 1.21 W (w/o PoE output)
IM-6700A-8SFP: 0.92 W
IM-6700A-6MSC/6MST/6SSC: 7.57 W
IM-6700A-4MSC2TX/4MST2TX/4SSC2TX: 5.28 W
IM-6700A-2MSC4TX/2MST4TX/2SSC4TX: 3.19 W
Physical Characteristics
100BaseFX
Multi-Mode
Typical Distance
IM-6700A-4MSC2TX
IM-6700A-4SSC2TX
IM-6700A-6MST
*See the SFP-1FE datasheet for Fast Ethernet module product information.
**IM-6700A-8PoE is supported by the IKS-6728A-8PoE series
IM-6700A-8PoE**
Fiber Cable Type
IM-6700A-6SSC
IM-6700A-6MSC
Single-Mode
G.652
40 km
Typical (nm)
1300
1310
TX Range (nm)
1260 to 1360
1280 to 1340
RX Range (nm)
1100 to 1600
1100 to 1600
TX Range (dBm)
-10 to -20
0 to -5
RX Range (dBm)
-3 to -32
-3 to -34
Link Budget (dB)
12
29
Dispersion Penalty
(dB)
3
1
Note: When connecting a single-mode fiber transceiver, we recommend
using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as
follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Weight:
IM-6700A-8TX: 225 g (0.50 lb)
IM-6700A-8PoE: 260 g (0.58 lb)
IM-6700A-8SFP: 295 g (0.65 lb)
IM-6700A-6MSC-6MSC/6MST/6SSC: 390 g (0.86 lb)
IM-6700A-4MSC2TX-4MSC2TX/4MST2TX/4SSC2TX: 270 g (0.60 lb)
IM-6700A-2MSC4TX-2MSC4TX/2MST4TX/2SSC4TX: 270 g (0.60 lb)
Reliability
MTBF (mean time between failures):
IM-6700A-8TX: 10,412,400 hrs
IM-6700A-8SFP: 3,510,110 hrs
IM-6700A-6MSC: 366,119 hrs
IM-6700A-6MST: 365,741 hrs
IM-6700A-6SSC: 365,741 hrs
IM-6700A-4MSC2TX: 530,268 hrs
IM-6700A-4MST2TX: 537,942 hrs
IM-6700A-2MSC4TX: 1,031,180 hrs
IM-6700A-2MST4TX: 1,031,180 hrs
IM-6700A-2SSC4TX: 1,031,180 hrs
IM-6700A-8PoE: 338,800 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
4
w w w. m o x a . c o m
Industrial Ethernet Solutions
Dimensions
41.8 (1.65)
89.7 (3.53)
89.7 (3.53)
89.7 (3.53)
71 (2.80)
71 (2.80)
71 (2.80)
104.1 (4.10)
41.8 (1.65)
105.6 (4.16)
Side View
41.8 (1.65)
105.6 (4.16)
105.6 (4.16)
Top View
104.1 (4.10)
104.1 (4.10)
Unit: mm (inch)
Front View
Ordering Information
Compatible Rackmount Ethernet Switch Systems
Modular Rackmount Ethernet Switch System:
IKS-6726A-2GTXSFP
IKS-6728A-4GTXSFP
IKS-6726A
IKS-6728A-8PoE
IKS-6728A
Fast Ethernet Modules, IM-6700A Series
Port Interface
Available Models
100BaseFX
10/100BaseT(X)
Multi-Mode,
Multi-Mode,
Single-Mode,
SC Connector
ST Connector
SC Connector
100BaseSFP*
IM-6700A-8TX
8
–
–
–
–
IM-6700A-8SFP
–
–
–
–
8
IM-6700A-6MSC
–
6
–
–
–
IM-6700A-6MST
–
–
6
–
–
IM-6700A-6SSC
–
–
–
6
–
IM-6700A-4MSC2TX
2
4
–
–
–
IM-6700A-4MST2TX
2
–
4
–
–
IM-6700A-4SSC2TX
2
–
–
4
–
IM-6700A-2MSC4TX
4
2
–
–
–
IM-6700A-2MST4TX
4
–
2
–
–
4
–
–
2
–
8 (PoE+ ports)
–
–
–
–
IM-6700A-2SSC4TX
IM-6700A-8PoE
Package Checklist
• IM-6700A series interface module
• Warranty card
5
w w w. m o x a . c o m
Industrial Ethernet Solutions
SFP-1G Series
1-port Gigabit Ethernet SFP modules
››Digital Diagnostic Monitor Function
››-40 to 85°C operating temperature range (T models)
››IEEE 802.3z compliant
››Differential LVPECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product, complies with EN 60825-1
EN : 60825
Specifications
Interface
Ethernet Ports: 1
Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only)
Optical Fiber
SFP-SX
Multi-Mode
OM1
OM2
300 m
550 m
850
Gigabit Ethernet SFP
SFP-LX
SFP-LH
SFP-LHX
Single-Mode Single-Mode Single-Mode
G.652
G.652
G.652
10 km
30 km
40 km
1310
1310
1310
SFP-ZX
SFP-EZX
SFP-EZX-120
Transceiver Type
Single-Mode Single-Mode Single-Mode
Fiber Cable Type
G.652
G.652
G.652
Typical Distance
80 km
110 km
120 km
Typical (nm)
1550
1550
1550
TX Range
Wave830 to 860
1270 to 1355
1280 to 1355 1280 to 1355 1280 to 1340 1530 to 1570 1530 to 1570 1530 to 1570
(nm)
length
RX Range
770 to 860
1260 to 1610
1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1260 to 1610 1100 to 1600
(nm)
TX Range
-4 to -9.5
-1 to -9
-3 to -9
-3 to -8
+3 to -4
+5 to 0
+5 to 0
+3 to -2
(dBm)
RX Range
0 to -18
-1 to -19
-3 to -21
-3 to -23
-1 to -24
-1 to -24
-9 to -30
-8 to -33
(dBm)
Optical
Power
Link Budget
8.5
10
12
15
20
24
30
31
(dB)
Dispersion
4.3
3.6
5
5
1
1
1
1
1
2
Penalty (dB)
Note: When connecting the SFP-LHX, ZX, EZX, or EZX-120, we recommened using an attenuator to prevent the transceiver from being damaged by excessive optical power.
SFP-10A
SFP-LSX
Multi-Mode
OM2
OM1
1 km
2 km
1310
SFP-10B
WDM Gigabit Ethernet SFP
SFP-20A
SFP-20B
Single-Mode
G.652
20 km
TX 1310, RX 1550
TX 1550, RX 1310
SFP-40A
SFP-40B
Transceiver Type
Single-Mode
Single-Mode
Fiber Cable Type
G.652
G.652
Typical Distance
10 km
40 km
Typical (nm)
TX 1310, RX 1550
TX 1550, RX 1310
TX 1310, RX 1550
TX 1550, RX 1310
TX Range
Wave1270 to 1355
1530 to 1570
1270 to 1355
1530 to 1570
1290 to 1330
1530 to 1570
(nm)
length
RX Range
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
1480 to 1580
1260 to 1360
(nm)
TX Range
-3 to -9
-2 to -8
+2 to -3
(dBm)
RX Range
-3 to -21
-2 to -23
-1 to -23
(dBm)
Optical
Power
Link Budget
12
15
20
(dB)
Dispersion
2
3
1
Penalty (dB)
Note: WDM-type SFP modules must be used in pairs (e.g., SFP-1G10ALC and SFP-1G10BLC)
Note: When connecting the SFP-40A and 40B, we recommend using an attenuator to prevent damage caused by excessive optical power.
Typical Distance: To reach the typical distance of specified fiber transceiver, please refer to formula: Link budget(dB) > dispersion penalty(dB) + total
link loss(dB).
6
w w w. m o x a . c o m
Industrial Ethernet Solutions
Power Requirements
Warranty
Power Consumption: Max. 1 W
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
Safety: CE, FCC, TÜV (EN 60825), UL 60950-1
Marine: DNV, GL
Dimensions
Unit: mm (inch)
SFP-1G Series
SFP-1G Series (WDM Type)
13.4 (0.5)
13.4 (0.5)
Top View
Top View
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
13.4 (0.5)
11.28 (0.4)
55.5 (2.2)
8.15
(0.3)
8.4 (0.3)
13.4 (0.5)
8.2
(0.3)
8.4 (0.3)
45.0 (1.8)
2.6 (0.1)
8.0 (0.3)
Rear View
Rear View
13.7 (0.5)
14.0 (0.6)
Side View
13.7 (0.5)
14.0 (0.6)
Side View
Ordering Information
Gigabit Ethernet SFP Models
Standard Temperature
Wide Temperature
Models (0 to 60˚C)
Models (-40 to 85˚C)
Transeiver Type
WDM Gigabit Ethernet SFP Models
Typical Distance
Wide
Standard
Temperature
(0 to 60˚C)
Temperature
Transeiver Type
Typical Distance
(-40 to 85˚C)
SFP-1GSXLC
SFP-1GSXLC-T*
Multi-Mode
300/550 m
SFP-1G10ALC
SFP-1G10ALC-T
Single-Mode
10 Km
SFP-1GLSXLC
SFP-1GLSXLC-T
Multi-Mode
1/2 Km
SFP-1G10BLC
SFP-1G10BLC-T
Single-Mode
10 Km
SFP-1GLXLC
SFP-1GLXLC-T
Single-Mode
10 Km
SFP-1G20ALC
SFP-1G20ALC-T
Single-Mode
20 Km
SFP-1GLHLC
SFP-1GLHLC-T
Single-Mode
30 Km
SFP-1G20BLC
SFP-1G20BLC-T
Single-Mode
20 Km
SFP-1GLHXLC
SFP-1GLHXLC-T
Single-Mode
40 Km
SFP-1G40ALC
SFP-1G40ALC-T
Single-Mode
40 Km
SFP-1GZXLC
SFP-1GZXLC-T
Single-Mode
80 Km
SFP-1G40BLC
SFP-1G40BLC-T
Single-Mode
40 Km
SFP-1GEZXLC
–
Single-Mode
110 Km
–
–
–
–
SFP-1GEZXLC-120
–
Single-Mode
120 Km
–
–
–
–
*SFP-1GSXLC-T: -20 to 75˚C operating temperature
Available Models
Please refer to the Moxa Ethernet SFP Transceiver Products Compatibility Matrix on the next page for available models.
7
Package Checklist
• SFP-1G module
• Warranty card
w w w. m o x a . c o m
Industrial Ethernet Solutions
SFP-1FE Series
1-port Fast Ethernet SFP modules
››Digital Diagnostic Monitor Function
››IEEE 802.3u compliant
››Differential PECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product; complies with EN 60825-1
EN : 60825
Specifications
Interface
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Ethernet Ports: 1
Connectors: Duplex LC Connector
Standards and Certifications
Optical Fiber
Fast Ethernet SFP
SFP-M
SFP-S
SFP-L
Multi-Mode
Single-Mode
Transceiver Type
Fiber Cable Type
OM1/OM2
62.5/125,
50/125 μm
800
MHz*km
G.652
G.652
Dimensions
Unit: mm (inch)
Top View
13.4 (0.5)
45.0 (1.8)
55.5 (2.2)
6.3 (0.2)
56.6 (2.2)
Side View
13.7 (0.5)
14.0 (0.6)
Power Consumption: Max. 1 W
Warranty Period: 5 years
Details: See www.moxa.com/warranty
8.2
(0.3)
8.4 (0.3)
Power Requirements
Warranty
13.4 (0.5)
Typical Distance
2 km
4 km
40 km
80 km
Typical
1310
1310
1550
(nm)
WaveTX Range
1280
to
1530
to
1280 to 1340
length
(nm)
1340
1570
RX Range
1100 to
1100 to
1100 to 1650
(nm)
1600
1600
TX Range
-8
to
-18
0
to
-5
0
to -5
(dBm)
RX Range
-3 to -32
-3 to -34
-3 to -34
(dBm)
Optical
Link
Power
Budget
14
29
29
(dB)
Dispersion
Penalty
2
3
1
1
(dB)
Note: When connecting the SFP-S or L, we recommend using an attenuator to
prevent damage caused by excessive optical power.
Safety: CE, FCC, TÜV, UL 60950-1
Marine: DNV, GL
Rear View
Environmental Limits
Ordering Information
Available Models
Wide Temperature
(-40 to 85˚C)
SFP-1FEMLC-T
SFP-1FESLC-T
SFP-1FELLC-T
Available Models
100BaseFX, Multi-Mode,
Port Interface
100BaseFX, Single-Mode,
100BaseFX, Single-Mode,
LC Connector, 4 km
1
–
–
LC Connector, 40 km
–
1
–
LC Connector, 80 km
–
–
1
Please refer to the Moxa Ethernet SFP Transceiver Products Compatibility Matrix on the next page for available models.
8
Package Checklist
• SFP-1FE module
• Warranty card
© Moxa Inc. All rights reserved. Updated May. 6, 2016. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.