Cisco 850 Series Integrated Services Routers for Small Offices

Data Sheet
Cisco 850 Series Integrated Services Routers
for Small Offices
®
The Cisco 850 Series of secure broadband and wireless routers is part of the Cisco
Integrated Services Router portfolio. Designed for small offices, the routers provide
secure WAN connectivity with optional integrated 802.11b/g WLANs in a single device.
Easy setup allows the Cisco 850 Series to be deployed at small remote offices and small
businesses, and remote management features enable IT managers and service providers
to provide better support at remote sites.
Product Overview
Cisco 850 Series integrated services routers are fixed-configuration routers that support
broadband cable and Asymmetric DSL (ADSL) over analog telephone lines connections in small
offices (Figures 1 and 2). They provide the performance needed to run concurrent services,
including firewall and encryption for VPNs and optional 802.11b/g for wireless networking. The
Cisco Router and Security Device Manager (SDM) Web-based configuration tool simplifies setup
and deployment (Figure 3), and centralized management capabilities give network managers
visibility and control of router configurations at the remote site.
Cisco 850 Series integrated services routers offer:
●
Secure connectivity with Stateful Inspection Firewall and IP Security (IPSec) VPN support
for small offices
●
4-port 10/100 switch
●
Secure WLAN 802.11b/g option with a single fixed antenna
●
Easy setup, deployment, and remote management capabilities through Web-based tools
®
and Cisco IOS Software
Figure 1.
Cisco 851 Integrated Services Router
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 8
Data Sheet
Table 1 lists the routers that currently make up the Cisco 850 Series.
Table 1.
Cisco 850 Series Models
Models
WAN Interface
LAN Interfaces
802.11b/g
Cisco 851
10/100 Mbps Fast Ethernet
4-port 10/100 Mbps switch
No
Cisco 851W
10/100 Mbps Fast Ethernet
4-port 10/100 Mbps switch
Yes
Cisco 857
ADSL
4-port 10/100 Mbps switch
No
Cisco 857W
ADSL
4-port 10/100 Mbps switch
Yes
Figure 2.
Deployment Scenarios
Applications
Cisco 850 Series routers are ideally suited for small office and remote office deployments. IT
managers can centrally manage the remote site to quickly troubleshoot any network issues.
Optional integrated secure WLAN connectivity simplifies the number of devices that need to be
managed at the remote site.
The Cisco 850 Series is ideal for managed services-service providers and value-added resellers
can use the series as a platform to offer differentiated security services and business-class
WLANs for small business customers.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 8
Data Sheet
Features and Benefits
Table 2 lists the features and benefits that the Cisco 850 Series provides. For additional product
details of the 850 Series ISR, go to the 800 Series Q&A site located at
http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/prod_qas0900aecd8028a982.ht
ml.
Table 2.
Features and Benefits of the Cisco 850 Series
Feature
Benefit
Stateful Inspection Firewall
and IPSec VPN Support
Provides secure access when connecting to the Internet or connecting small offices to a
central site
4-Port Mbps 10/100 Switch
High-speed LAN ports connect multiple devices to the small office network
Optional 802.11b/g WLANs
Offers a secure broadband router and access point for WLANs in a single device
Cisco SDM and Remote
Management Features
of Cisco IOS Software
Figure 3.
● Cisco SDM helps resellers and customers to quickly and easily deploy, configure, and
monitor a Cisco access router without knowledge of the Cisco IOS Software
command-line interface (CLI)
● Out-of-band management with an external modem through the auxiliary port allows IT
managers to remotely manage routers at small office sites
● Cisco Configuration Express Service supports factory-loaded configurations in highvolume deployments
● Support for the Cisco CNS 2100 Series Intelligence Engine enables plug-and-play
installations with centralized configuration management
Cisco SDM
Summary
Cisco 850 Series integrated service routers combine support for DSL or cable connections, secure
connectivity with Stateful Firewall and VPN support, and optional 802.11b/g for secure WLANs.
With easy setup for nontechnical users and central management capabilities, Cisco 850 Series
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 8
Data Sheet
routers are suitable for deployment in small businesses or remote offices by value-added resellers,
enterprise IT managers, or service providers.
Product Specifications
Tables 3 and 4 list software and hardware features of Cisco 850 Series routers.
Table 3.
Software Features of the Cisco 850 Series
Feature
Routing Protocols and
General Router Features
Description
● Routing Information Protocol (RIPv1 and RIPv2)
● Layer 2 Tunneling Protocol (L2TP)
● Network Address Translation (NAT) and Port Address Translation (PAT)
● RFC 1483/2684
● Point-to-Point Protocol over ATM (PPPoA) (Cisco 857)
● PPP over Ethernet (PPPoE)
● 802.1d Spanning Tree Protocol
● Dynamic Host Control Protocol (DHCP) server/relay/client
● Access control lists (ACLs)
● Generic routing encapsulation (GRE)
● Dynamic DNS Support for Cisco IOS
Recommended
Number of Users
10
DSL and ATM Features
(DSL Model Only)
● ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit
Rate/non-real-time (VBR-nrt)
● ATM Operation, Administration, and Maintenance (OAM) Support for F5 Continuity
Check; segment and end-to-end loopback; and Interim Local Management
Interface (ILMI) support
● 8 virtual circuits
Security Features
● Stateful Inspection Firewall
● Hardware-accelerated Triple Data Encryption Standard (3DES) for IPSec
● Hardware-accelerated Advanced Encryption Standard (AES) for IPSec
● IPSec 3DES termination/initiation
● IPSec pass-through
● 5 VPN Tunnels
● Point-to-Point Tunneling Protocol (PPTP) pass-through
● L2TP pass-through
● Advanced Application Inspection and Control
● E-mail Inspection Engine
● No Service Password Recovery
● HTTP Inspection Engine
● System Logging-EAL4 Certification Enhancements
Quality of Service (QoS)
Features
● Weighted Fair Queuing (WFQ)
● Policy-based routing (PBR)
● Per-VC queuing
● Per-VC traffic shaping
Management Features
● Cisco SDM
● Cisco Configuration Express
● Cisco CNS 2100 Intelligence Engine support
● DSL firmware update from Flash
● Cisco Service Assurance Agent (SAA)
● Telnet, Simple Network Management Protocol (SNMP), CLI, and HTTP
management
● Out-of-band management with external modem through virtual auxiliary port
● RADIUS and TACACS+
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 8
Data Sheet
Table 4.
WLAN (Cisco 851W and 857W) Features of the Cisco 850 Series
Feature
Description
● 802.11b/g
● Automatic rate selection for 802.11b/g
WLAN Hardware
● External antenna (cannot be removed)
● Indoor range: 1 Mbps @ 320 ft
● WECA interoperability
● Default antenna gain: 2.2 dBi
● Maximize throughput or maximize range option
● Software configurable transmit power
WLAN Software Features
● SSID Globalization
● 802.1X
● 802.11i
WLAN Security Features
● Wi-Fi Protected Access (WPA) & AES (WPA2)
● EAP Authentication: Cisco LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-SIM, EAP-MD5,
EAP-TTLS
● Static and dynamic Wired Equivalent Privacy (WEP)
● Temporal Key Integrity Protocol (TKIP)/SSN Temporal Key Integrity Protocol/Simple
Security Network encryption
● MAC authentication/filter
● User database for survivable local authentication using LEAP & EAP-FAST
● Configurable limit to the number of wireless clients
● Configurable RADIUS accounting for wireless clients
● PSK (Pre Shared Keys) (WPA-SOHO)
SSIDs
10
Wireless VLANs
10
Encrypted Wireless VLANs
4
MBSSIDs
1
Table 5.
Hardware Features of the Cisco 850 Series
Feature
Description
Default DRAM
64 MB
Maximum DRAM
64 MB
Default Flash Memory
20 MB
Maximum Flash Memory
20 MB
WAN
● Cisco 851: 100 MB Ethernet
● Cisco 857: ADSL over analog telephone lines
LAN Switch
4-port 10/100BASE-T switch with autosensing MDI/MDX (Media Device In/Media Device
Crossover) for auto-crossover
802.11b/g WLANs
Optional on both Cisco 851 and Cisco 857 models
Console Port
RJ-45
LEDs
PPP, VPN, ADSL, WLAN, LAN
External Power Supply
Universal 100 to 240 VAC
DSL Specifications
● ST-Micro DynaMiTe (formerly Alcatel Micro Electronics) ADSL Chipset (20190)
● T1.413 ANSI ADSL DMT issue 2
● G.992.1 ITU G.DMT support
● G.992.3 ITU G.hs ADSL type negotiation
● G.992.3 (ADSL 2)/G.992.5(ADSL2+)
● DSL Forum TR-067 The chipset does not provide interoperability with carrierless
amplitude modulation/phase modulation (CAP)-based ADSL lines.
Wireless Specifications
Data Rates Supported
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 8
Data Sheet
Feature
Receive Sensitivity
Description
● 802.11b
◦
-94dBm @ 1 Mbps
◦
-93dBm @ 2 Mbps
◦
9-2dBm @ 5.5 Mbps
◦
-90dBm @ 11 Mbps
● 802.11g
Maximum Conducted
Transmit Power
◦
-92dBm @ 6 Mbps
◦
-90dBm @ 9 Mbps
◦
-89dBm @ 12 Mbps
◦
-87dBm @ 18 Mbps
◦
-85dBm @ 24 Mbps
◦
-81dBm @ 36 Mbps
◦
-76dBm @ 48 Mbps
◦
-73dBm @ 54 Mbps
Note: Maximum power setting subject to changes by channel & by region depending on
regulations
● 802.11b Average: 80mW (19dBm), Peak (FCC): 245mW (23.9dBm)
● 802.11g Average: 50mW (17dBm)
Immunity
● IEC 61000-4-2:1995 Immunity to Electrostatic Discharges
● IEC 61000-4-3:1995 Immunity to Radio Frequency Electromagnetic Fields
● IEC 61000-4-4:1995 Immunity to Electrical Fast Transients
● IEC 61000-4-5:1995 Immunity to Power Line Transients (Surges)
● IEC 61000-4-6:1996 Immunity to Radio Frequency-Induced Conducted Disturbances
● IEC 6100-4-8: 1003 Immunity to Power-Frequency Magnetic Fields (N/A for most Cisco
equipment)
● IEC 61000-4-11:1995 Immunity to Voltage Dips, Voltage Variations, and Short Voltage
Interruptions
Physical Dimensions
and Weight
● Dimensions with antenna connectors (H x W x D): 2.00 x 10.25 x 9.13 in.
● (50.8 mm x 260.4 mm x 231.9 mm)
● Dimensions without antenna connectors (H x W x D): 2.00 x 10.25 x 8.50 in.
● (50.8 mm x 260.4 mm x 215.9.9 mm)
● Weight: 2.10 lb (0.954 kg) (Antenna not included)
Power
● AC input voltage: 100 to 240 VAC
● Frequency: 50 to 60 Hz
● Maximum output power: 26W
● Output voltages: 5 and 12V
Approvals and Compliance
● UL 1950/CSA 950-95, Third Edition
● IEC 950: Second Edition with Amendments 1, 2, 3, and 4
● EN60950: 1992 with Amendments 1, 2, 3, and 4
● CS-03, Canadian Telecom Requirements
● FCC Part 68 U.S. Telecom Requirements
● AS/NZS 3260: 1996 with Amendments 1, 2, 3, and 4
● ETSI 300-047
● TS 001 with Amendment 1
● EMI
● AS/NRZ 3548: 1992 Class B
● CFR 47 Part 15 Class B
● EN60555-2 Class B
● EN55022 Class B
● VCCI Class II
● ICES-003, Issue 2, Class B, April 1997S
● IEC 1000-3-2
Certifications
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 8
Data Sheet
Feature
Description
● Nonoperating temperature: -4 to 149°F (-20 to 65°C)
● Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing)
Environmental Operating
Range
● Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 85 percent relative humidity (noncondensing)
● Operating altitude: 0 to 10,000 ft (0 to 3000m)
DSLAM Interoperability
Table 6 lists the Cisco supported DSLAMs (Digital Subscriber Line Access Multiplexer) for the
Cisco 850.
Table 6.
DSLAM Interoperability
DSLAM
ECI Hi-Focus
Alcatel 7300
Lucent Stinger
Chipset
ADSL POTS
ADSL POTS
ADSL POTS
Analog Devices
Alcatel/ST
Globespan
X
X
X
857
ADSL2+ Support
Table 7 lists the ADSL2+ (Asymmetric Digital Subscriber Line 2+) support provided through Cisco
IOS Software Release 12.4(4)T.
Table 7.
ADSL2+ Support
DSLAM
Linecard
Linecard Chipset
DSLAM Firmware
Alcatel 7300
ADSL2+ POTS
BRCM
L7D6AA47.020
Lucent Stinger
ADSL2+ POTS
GSPN
9.7.1e64
Alcatel 7300
ADSL2+ ISDN
BRCM
L7D6AA47.020
Ordering Information
Table 8 lists ordering information for the Cisco 850 Series. To place an order, visit the Cisco
Ordering Home Page.
Table 8.
Ordering Information
Part Number
Product
CISCO851-K9
Cisco 851 Ethernet to Ethernet Router
CISCO851W-G-A-K9
Cisco 851 Ethernet to Ethernet Wireless Router; Americas
CISCO851W-G-E-K9
Cisco 851 Ethernet to Ethernet Wireless Router; Europe
CISCO851W-G-J-K9
Cisco 851 Ethernet to Ethernet Wireless Router; Japan
CISCO857-K9
Cisco 857 ADSL Router
CISCO857W-G-A-K9
Cisco 857 ADSL Wireless Router; U.S. and Americas
CISCO857W-G-E-K9
Cisco 857 ADSL Wireless Router; Europe
Note:
For Cisco 850 Series wireless router part numbers, the following letters are associated
with specifications meeting wireless regulations in the respective regions: A=Americas (FCC
regulatory domain), E = Europe, J = Japan
To Download Software
To download Cisco IOS Software, visit the Cisco Software Center.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 8
Data Sheet
To download the latest Cisco SDM software, visit http://www.cisco.com/go/sdm.
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative
services programs are delivered through a unique combination of people, processes, tools, and
partners, resulting in high levels of customer satisfaction. Cisco services can help you protect your
network investment, optimize network operations, and prepare your network for new applications
to extend network intelligence and the power of your business. For more information about Cisco
Services, see Cisco Technical Support Services or Cisco Advanced Services.
For More Information
For more information about Cisco 850 Series secure broadband and wireless routers, visit the 800
Series Q&A site at
http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps6200/prod_qas0900aecd8028a982.sh
tml or contact your local account representative.
Printed in USA
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-374753-04 8/07
Page 8 of 8