Find this product online: elandcables.com | Cables & Accessories
Tools | Tools for Cable Ties
Tools for Cable Ties
Eland Product Group: FCA
APPLICATION
A range of automatic tools made of steel or plastic for tightening
and cutting cable ties in one operation.
The electrical and dimensional properties of this product are measured by the
Technical and Quality Assurance department at the Eland Cables laboratory. Cable
performance in respect of conductor resistance, construction quality (workmanship),
dimensional consistency, and other parameters are verified to published standards
and approved product drawings. Conformance to RoHS (Restriction of the use of
Hazardous Substances) is determined and confirmed.
DESCRIPTION
Pressed Steel Mechanics and Plastic Body
ELAND PART NO.
CABLE SIZE
mm2
FCCTG 1
2.4 - 4.8
Durable Pressed Steel Mechanics and Plastic Body
ELAND PART NO.
CABLE SIZE
mm2
FCCTG 1HD
4.8 - 7.6
Pressed Steel Mechanics and Steel Body. Range of Tension Control Settings
ELAND PART NO.
CABLE SIZE
mm2
FCCTG 2
2.4 - 4.8
ELAND PART NO.
CABLE SIZE
mm2
FCCTG 3
7.6 - 9.0
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of
publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.
UK T 020 7241 8787 | F 020 7241 8700 | sales@elandcables.com | www.elandcables.com
International T +44 20 7241 8740 | F +44 20 7241 8700 | international@elandcables.com
technicalspecification | 1 of 1
ISSUE NO 01-03 -2014
For Wire Armoured Cable (Non-Hardened Steel)