R400 Series – Data Sheets
•
•
100,000 d @ 0.25 µV/d
Trade approved Australia,
Europe and USA
•
•
Built in RS232/RS485
IP65 ABS or stainless steel
housing
•
16 x 350 ohm cells
•
Ethernet and Profibus DP
support
•
Robust precise analogue
output module
The R400 series of indicators are designed with both the installer and operator in mind and cover
a wide range of applications. They are engineered and built to last with reliability being foremost.
The modular design allows for the installation to be commissioned with only the components
required, saving on time and money.
Flexibility is the key with its award winning modular accessory design. Modules include:
additional serial options, input/outputs, analogue outputs, external buttons, Ethernet, Alibi (Data
Storage Device) and battery or AC option.
Superior housings - two housing types are available:
•
R420 (ABS) rated to IP65
•
R423 (stainless steel) rated to IP66
Both housings are designed with extra attention to detail to increase their reliability in the field,
thereby reducing unplanned downtime and servicing costs. For example, the R423 uses a high
impact polycarbonate lens to protect the LCD from knocks.
Simple setup - use the menu system directly via the alpha numeric keypad or the configuration
utility View400 on a PC.
Operator friendly - large multi-segment display that uses logical prompts along with dedicated
and programmable function keys. Printing can be tailored with custom record, docket or reports
printouts. Primary display is 29mm (1.1”) and secondary display 18mm.
Rugged Load Cell Input - Designed to take 16x320 ohm load cells; providing flexibility and
reducing the need for summing hardware, simplifying the installation and saving money. The load
cell input is protected with onboard transorbs to limit damage from external voltage surges.
Networking Capability - Support for both Ethernet and Profibus DP to improve integration into
larger control systems
Modules
The R400 Series flexibility is provided through its broad range of modules that are easy to
configure and neatly connect into the rear of the indicator. There are 4 module slots where an
indicator can be equipped with only the features required for a given installation.
Robust Input/Output Modules (M4301, M4311, M4321, M4331)
An R400 indicator can be equipped with up to 32 I/O. These I/O are electrically isolated, designed
for direct connection into PLC’s and are capable of driving low voltage actuators directly.
•
Isolated high side (400mA current source) drivers are capable of driving low voltage
actuators directly or can be connected directly with PLC controllers.
•
Each module has 8 digital I/O ports which are limited to maximum input voltage of 30V
and can drive up to 400mA.
•
Direct connection between I/O points is supported
•
Inputs are isolated to resist against system noise.
Button Module (M4302)
The Button Module provides 4 voltage free inputs for use with switches or thumbwheels. The
voltage free inputs eliminate the need to wire up complicate input driver circuits.
R400-702-410
Isolated Communication Modules
Communication modules are in addition the built in RS232/RS485 ports on the R400 indicators.
•
Fully isolated and recommended for application where there is a risk of lightening or
surges or where additional communication ports are required.
•
M4201 RS232/RS232, M4202 RS232/RS485, M4203 RS485/RS485
Precise Robust Analogue Output Module (M4401)
The analogue module provides a 4-20mA or 0-10V analogue output and two digital I/O.
•
Isolated so as to resist against system noise and interference therefore reducing
unnecessary callouts;
•
Precise with a 400Hz (2.5msec) update rate and 1/65,000 resolution. The fast update
and high D to A conversion rate give a smooth output curve which helps a PLC to see
more realistic readings (2.5msec step)
•
Scalable to suit the input on the PLC.
•
Two digital I/O provided the same as the M4301
Data Storage Device Module (M4501)
The Data Storage Module provides non volatile alibi memory storage (6M bytes) according to
WELMEC 7.2 L. Compatible with later versions of software.
Ethernet (M4221)
The Ethernet Module provides 10/100 Base TX with auto negotiation (1 Raw bi-directional port
and 10 Raw transmit only ports).
Accessories
Converter 0-10V/4-20mA Input (M4902)
Connects to the Load Cell Input on R400 series indicators for a voltage or current input. Useful
where an indicator needs to take an input from load pins on a crane scale for example. Suitable
for pressure, displacement or strain transducers that output 4-20mA or 0-10V analogue signals.
Opto-link
The magnetically coupled opto-link on the front panel provides a convenient temporary connection
to a laptop - no need to access rear of the indicator.
•
Transfer of setup and calibration information
•
Download of software upgrades
Relay Module
The relay module, used in conjunction with an I/O module, provides 8 voltage free relay outputs
rated to 250VAC and 8A.
•
DIN rail mountable.
•
Provides N/O (normally open) and N/C (normally closed) contacts for each output.
Smart Weighing
Superior Diagnostics
R400 series indicators have a range of diagnostic tools and features that aid
system commissioning and maintenance.
Hardware configuration report summarises how the indicator hardware is setup,
providing a record for maintenance purposes or fault finding
Force Output and Test Input functions allow the installer to specifically test I/O
to assist in site setup
Modules can be swapped in and out without recalibration of the indicator, saving
time and effort
Status LED on each I/O;
Overload counter to review if the scale has been overloaded.
..now that’s smart weighing.
R400-702-410
R400 Series – K401 – Data Sheet
•
Counting with piece weight entry
•
Custom unit switching
•
Set pointing
•
Reporting
•
Custom printing
•
PLC integration
The K401 is a general purpose indicator suitable for weigh bridges, general
trade weighing, multiple indicator weighing systems and process control. The
Scale Entry/Exist features make the K401 ideal for unmanned weigh bridges.
Programmable printing for customized dockets and reports can support two
separate printers
•
Comprehensive print tokens allow for all instrument data to be printed
in a variety of formats
•
Custom print strings can be assigned to multiple instrument events, for
example long and short press of a print key.
Custom Unit Switching allows for complete flexibility
•
programme for standard weight units (kg, lb, t etc) or
•
define alternative weighing units for your application (litres or force for
example)
Flexible set point configuration for improved system integration. A set point
can be individually configured to instrument status or weight target triggers.
Each set point can be:
•
independently configured for a given function
•
associated with a given output
•
configured for high or low logic
•
defined to use a given weight source – Gross, Net, Alternate Units or
Piece count
The large multi-line display assists the operator by displaying current weight and
total weight and product name.
Smart Weighing
R400 Logic set points are based on the status of the inputs and the
defined mask that is used to match IO1-IO24 for the logic set points.
•
AND logic set point active when all inputs in mask are on.
•
OR logic set point active when any inputs in mask are on.
•
XOR logic set point active when only one input in mask is on.
For applications that require a combination of multiple conditions eg.
•
An output that is only to be active when weight is above
target and stable.
•
Pass band: weigh is between two targets
..now that’s smart weighing.
R400-702-410
R400 Series – K402 – Data Sheet
•
250 Product storage
•
Counting with piece weight
entry
•
Custom unit switching
•
Set pointing configured on a
product basis
•
Reporting
•
Custom printing
The K402 adds multiple-product databas to the K401, making it ideal for
applications where there are a variety of products that have fixed attributes that
need to be recalled.
Powerful product configuration allows for parameters to be stored for each
product. For each product the following can be stored:
•
set point target (up to 8 per product)
•
piece weight
•
units conversions
•
full accumulation data
Products can be recalled easily by the operator by using the product name - either
select from the most recently used 10 products or use an alphanumeric product
search via the keypad. Product selection via an external thumb-wheel is also
supported.
Counting is made easy with either the piece weight is entered or determined
through a sample. This piece weight can then be stored against the product id.
Multi-segment display assists the operator for piece weight counting by displaying
the number of pieces on the primary line and the piece weight on the secondary
line.
Smart Weighing
Powerful Product Configuration
•
Database of up to 250 complete sets of product parameters
•
Combine with logic set points for pass band where the
weight is between two targets
•
Combine with custom printing functionality to print product
subtotals and product names
•
Select products using the keyboard or use external inputs
from switch contacts (eg. thumb wheel)
..now that’s smart weighing.
R400-702-410
R400 Series – K404 – Data Sheet
•
250 Truck IDs (Products)
•
Preset Tare and accumulation
data on each Truck ID
•
Single and two pass weighing
•
Alpha-numeric Truck ID names
•
Programmable printing
•
•
Print the weight of the truck on the scale
Drive up to 16x350ohm load
cells
•
Weigh a truck in a single pass using its tare weight
•
Simple two button operation
•
Weigh a known truck with a stored Truck ID and preset tare and
accumulate the statistics on that truck ID.
•
Two pass weighing with a weigh in followed by a weigh out. The ticket
will show time/date weigh-in, weigh-out and net weights.
•
Automatic temporary Truck ID to simplify weigh-in/weigh-out for fast
weighing throughput. The temporary Truck ID is removed once the
weigh-out is complete.
Weigh in screen
The K404 is designed specifically for truck weighing. It allows for a range of
operational scenarios all in one setup, from weigh-in/weigh-out to stored truck ids.
The dedicated Truck ID button and Print button simplify the operator interface.
Additionally the alpha-numeric keypad allows for easy entry of tare weight and
Truck IDs. With 250 Truck IDs available it is suitable for applications with truck
fleets of up to 250.
The following operational scenarios can all be handled on the one setup:
R400 Indicators are ideal for weigh bridges:
Weigh out with preset tare
•
Isolated communication modules for excellent protection against lightning
•
All accessory modules, including the power supply, can be swapped
without recalibration.
•
Indicator configuration and setup can be reused and easily uploaded
using the opto-link on the front panel.
•
Pre-calibration using mV/V saving time on full calibration
Smart Weighing
Dedicated Truck Weighing Interface
The K404 operation builds on years of experience working with specialist
truck scale manufactures to streamline weigh bridge operation and simplify
the operator experience.
•
Simple two button operation Truck ID and Print
•
Automatic temporary truck ID assigned if permanent ID isn’t
required
•
Single pass or two pass weighing with same set up.
..now that’s smart weighing.
R400-702-410
R400 Series – K410 – Data Sheet
•
100 Recipes (Products)
•
3 set batching stages- Fill,
Dump and Pulse
•
1 Material/3 Speed Fill
•
Fill correction using jogging
or in-flight
•
Negative batching
•
Batch suspend
•
Dump to time or weight
The K410 is a single material filling application used for dosing, bagging and silo
discharge.
Easy setup: The K410 uses three set batching stages: fill, dump and a finish
stage. The defined I/O simplifies setup - defining the fill outputs, interlocks and
enables that would generally be used on filling systems.
Negative batching is supported by setting the fill direction which defines if the
weight is increasing or decreasing while batching - ideal for discharge and dosing
applications.
Batch Suspend can be allocated to a function key - the batch will pause and adjust
the tare weight when resuming the batch. Ideal for when a material feeding the
batch needs to be topped up during the batch without affecting the batched amount,
or when feeding from multiple bulker bags etc.
Timer based multiple batching uses the Real Time Clock to control the batch start
time and the duration between repeat batches - ideal for bio-fuel applications.
When using timer based batching, the current weight is displayed along with the
time to go before the next batch, keeping the operator informed.
Smart Weighing
Predefined fill, dump and finish configuration for fast setup.
IO1
IO2
IO3
IO4
IO5
IO6
IO7
IO8
All Stages Batch Interlock
Stage 1 Slow Fill
Stage 1 Medium Fill
Stage 1 Fast Fill
Stage 1 Fill Interlock
Stage 2 Dump Enable
Stage 2 Dump Output
Stage 3 Pulse Output
..now that’s smart weighing.
R400-702-410
R400 Series – K411 – Data Sheet
•
100 Recipes (Products)
•
10 Batching stages
•
Fill, Dump, and Pulse stages
•
6 Materials/3 Speed Fill
•
Fill correction using jogging
or in-flight
•
Dump to time or weight
•
Negative batching and Batch
suspend
•
Timer based multiple
batching using Real Time
Clock
The K411 provides a powerful and flexible batching controller that builds on the
K410 functionality where up to 10 batching stages can be defined for an application
as either a fill, dump or pulse stage. It is suitable for multi-head batching machines
and more complex control systems.
Detailed reporting with material usage and batch statistics, along with QA records
of every batch run possible when combined with the data logger;
Batching operation flexibility where batch size can be varied by either weight or
proportion and the operator can set number of batches to run.
Overall system accuracy of the K411 allows for unprecedented filling control with
uncertainty of less than 1 millisecond.
The 32 I/O control points available on R400 indicators allow for complex control
with multiple set points, enables and interlocks. As the outputs are isolated high
side (current source) drivers they are capable of driving low voltage actuators
directly or can be connected directly with PLC controllers.
The multi-line display shows batch progress, current weight, target weights,
material name along with dedicated batch status annunciators. For example in a
batch out scenario current net weight and target weight along with name of the
material that is being batched is displayed.
Smart Weighing
Functions for Industry
Automatic proportion calculation after first fill stage
•
Proportions of remaining batch are adjusted automatically
according to first material fill quantity
•
Ideal for applications with a manually loaded first fill stage
Timer based multiple batching
•
The Real Time Clock is used to control the batch timing
for time based batching
•
Ideal for bio-fuel and dosing applications
..now that’s smart weighing.
R400-702-410
R400 Series Specification Table
Up to 100,000 d, minimum of 0.25uV/d
Resolution
10,000 d @0.7uV/d NMI(S-463), OIML R76
III/III L NTEP 08-720
Approvals
MID 2004/22/EC - WELMEC 2.1 & 7.2
FCC, CE, C-tick
Zero Cancellation
+/- 2.0mV/V
Span Adjustment
0.1mV/V to 3.0mV/V
7.4V for up to 16 x 350 or 32 x 700 ohm load cells (4-wire or 6-wire plus shield)
Excitation
Maximum total load cell resistance: 1,000 ohms
24bit Sigma Delta with ±8,388,608 internal counts
A/D Type
Temperature: –10 to +50°C ambient (14 °F to 122 °F)
Operating Environment
Humidity: <90% non-condensing
LCD with 4 alpha-numeric displays and LED backlighting:
Primary display: 6 x 28.4mm (1.12") high digits with units and annunciators
2nd display: 9 x 17.6 mm (0.7") digits with units
Display
3rd display: 8 x 6.1 mm (0.2") digits
4th display: 4 x 7.6 mm (0.3") digits
Setup and Calibration
Full digital with visual prompting in plain messages
Digital Filter
Sliding window average from 0.1 to 30.0 seconds
Adjustable from +/- 2% to +/- 20% of full capacity
Zero Range
12 to 24VDC (15 VA max) - ON/OFF key with memory feature
Standard Power Input
AC power supply
AC
Input: 110/240VAC 50/60Hz Output: 12VDC 15VA
Variants
2.5AH NiMH rechargeable battery pack
Battery
Charger Input: 110/240VAC 50/60Hz Output: 12VDC
Magnetically coupled infra-red communications
Optical Data Communications
Conversion cables available for RS232 or USB
10 point linearity correction
Correction
Serial 1A: RS-232 serial port for remote display, network or printer supports.
Serial 1B: RS485 transmit only for remote display
Serial Outputs
Transmission rate: 2400, 4800, 9600 or 19200 baud
3
Assignable Function Keys
Single Range, Dual Range and Dual Interval
Operating Modes
Battery life 10 years minimum
Battery Backed Clock Calendar
Application Software
Functions
K401
K402
Custom printing,
custom unit
switching,
counting,
manual hold, peak
hold,
auto output
totalising
K404
Single pass weighing
Two pass weighing
Dedicated truck key
Custom printing
Temporary Truck IDs
Preset Tare
Specialised truck
dockets
K410
K411
1 Material
6 Material
3 fixed batching stages
Up to 10 Batching Stages
- fill, dump and pulse
3 Speed Fill,
3 Speed Fill
Fill, Dump & Pulse stages
Inflight & jogging correction,
Negative batching
Batch suspend
Timer (RTC) based multiple batching
Products/Recipes
1
250
250 Trucks
100 Recipes
1
Analogue Output *
Additional Communications *
100 Recipes
8
Set points
Module: RS232/RS232 Module: RS232/RS485 Module: RS485/RS485
4 Buttons
Button Input *
1
Data Storage Device *
Used with Rinstrum 1400 Profibus-DP Module
Profibus-DP
1
Ethernet *
Housing Options
R420
R423
Case Materials
ABS
Stainless Steel
Indicator: 1kg (35 oz)
Indicator: 1.2kg (42 oz)
IP65
IP66
Packing Weights
Environmental IP Rating
(panel mounted or with rear boot)
R400-702-410
R420 Rear Boot for IP65 standalone
unit
Rear Boot
R420 Brackets
Rear Boot with
Desk Stand
Stainless Steel Wall Mounting
M4003
R423 Bracket
Stainless Steel
Post Mounting
M4004
Stainless Steel
Desk/Wall/Post Mounting
ABS Panel Mount
[5.7in]
144mm
[2.1in]
54mm
[1.4in]
35mm
[4.8in]
121mm
[9.7in]
246mm
ABS with Rear Boot
[5.1in]
130mm
[5.3in]
134mm
Stainless Steel Panel Mount
10.4in
263mm
1.1in
27.5mm
0.2in
4mm
0.1in
2mm
5.6in
141.2mm
5.5in
140.2mm
2.0in
51mm
5.3in
135.7mm
Stainless Steel with Rear Housing and Stand
131.6mm
5.18in
267.1mm
10.52in
32mm
1.26in
213.3mm
8.40in
130mm
5.12in
213.3mm
8.40in
83.3mm
3.28in
323.3mm
12.73in
Specifications are subject to variation for improvement without notice. Illustrations are indications only and variation may be evident between products.
*Optional modules
R400-702-410
R400 Series – K481 – Data Sheet
•
Up to 9 slave units
•
Up to 4 subtotals
•
Subtotal can add or subtract
slave values
•
Sum R300 indicators
•
Sum R400 indicators
•
Built in serial ports
•
Complies to Technical
Schedule S1/0/A
The K481 Summing Indicator is based on the R400 Series indicator hardware. It
shares the same style operator interface and setup menus making it easy for both
the operator and the installer. The K481 can sum both R300 Series and R400
Series indicators.
Sum Nine (9) Slave Units: The K481 can sum up to nine slave indicators from
either the R300 or R400 range. These can be connected together on a multi-drop
serial RS485 bus or RS232 ring network. The summing indicator polls each of the
slave units summing all of the weight readings, and displays the resulting total
weight.
Four (4) Subtotals: Up to 4 subtotals can be defined to add or subtract slave
values. Each subtotal can be named to assist the operator and for custom printing.
Support for R400 Series Modules and Accessories: The K481 uses the R400
series Accessories and supports many of the R400 series modules – additional
communications modules, button module, input/output modules and analogue
module.
Applications: multiple deck weigh bridges, car balancing systems, aircraft
weighing, medical bed weighing applications and shipyard centre of gravity ballast
determination.
Smart Weighing
Designed to support applications where balance or relative
weight is important.
Up to 4 subtotals can be defined - these subtotals can add or
subtract slave weight values. In a car balancing scenario four
subtotals are defined:
•
Front Axle = 1+4
•
Back Axle = 2+3
•
Left Side = 1+2
•
Right Side = 3+4
..now that’s smart weighing.
R400-702-410
R400 Series – K481 Summing Specification Table
Australia NMI S1/0/A
Approvals
FCC, CE, C-tick
Temperature: –10 to +50°C ambient (14 °F to 122 °F)
Operating Environment
Humidity: <90% non-condensing
LCD with 4 alpha-numeric displays and LED backlighting:
Primary display: 6 x 28.4mm (1.12") high digits with units and annunciators
nd
2 display: 9 x 17.6 mm (0.7") digits with units
Display
rd
3 display: 8 x 6.1 mm (0.2") digits
th
4 display: 4 x 7.6 mm (0.3") digits
Standard Power Input
12 to 24VDC (15 VA max) - ON/OFF key with memory feature
AC power supply
AC
Input: 110/240VAC 50/60Hz Output: 12VDC 15VA
Variants
2.5AH NiMH rechargeable battery pack
Battery
Charger Input: 110/240VAC 50/60Hz Output: 12VDC
Magnetically coupled infra-red communications
Optical Data Communications
Conversion cables available for RS232 or USB
Serial 1A: RS-232 serial port for remote display, network or printer supports.
Serial 1B: RS485 transmit only for remote display
Serial Outputs
Transmission rate: 2400, 4800, 9600 or 19200 baud
3
Assignable Function Keys
Battery life 10 years minimum
Battery Backed Clock Calendar
Application Software
K481
Up to 9 Slaves (R300s or R400s all one type)
Up to 4 Subtotals
Custom Printing, Auto Output
Functions
250
Products/Recipes
8
Set points
1
Analogue Output *
Additional Communications *
Module: RS232/RS232 Module: RS232/RS485 Module: RS485/RS485
4 Buttons
Button Input *
Data Storage Device *
1
Ethernet *
1
Housing Options
Case Materials
Packing Weights
Environmental IP Rating
(panel mounted or with rear boot)
*Optional modules
R400-702-410
R420
R423
ABS
Stainless Steel
Indicator: 1kg (35 oz)
Indicator: 1.2kg (42 oz)
IP65
IP66
R400 Series – K491 Tilt Compensation – Data Sheet
•
2 Axis tilt compensation
•
Supports R400 series
modules & accessories
•
I/O Modules
•
Communication Modules
(RS232/RS485)
•
Up to 250 Products
•
Built in RS232/RS485 ports
•
Up to +/- 15 degree
compensation
The K491 is a general purpose indicator that uses an accessory module to connect
to a 2 axis tilt sensor that provides tilt compensation. The K491 is ideal for
specialist truck OEM’s requiring electronics for accurate load weighing solutions
where the load may be on an angle. Both the ABS R420-K491 and stainless steel
R423-K491 are ideal for panel mounting in a truck cab, featuring a large display and
programmable function keys. The application is for a truck to have accurate weight
readings that can compensate for uneven surfaces where a weight reading might be
taken
Simple calibration: Zero/Span calibration (at 0 angle) and tilt calibration to
generate the four tilt parameters that are used to correct the reading.
Accessories: The K491 requires a tilt module and tilt sensor.
•
Tilt Module (M4211)
•
Rinstrum tilt sensor (M4) suitable for +/- 10 degree
•
The tilt sensor must be correctly mounted given the axes that are providing
data
•
The K491 is compatible with a selection of the other sensors up to +/-15
degrees
Custom printing: dockets can be customised for the application. The built in
RS232/RS485 port can be configured for printing.
Smart Weighing
Simple three stage calibration
1. Zero Calibration (at 0 angle)
•
Performed on level surface
•
Tilt sensor is automatically set to 0
•
Calibrates out any inaccuracies
2. Span Calibration (at 0 angle)
3. Tilt Calibration - this generates four tilt parameters that are used
to correct the reading.
..now that’s smart weighing.
R400-702-410
R400 Series – K491 Tilt Compensation Specification Table
Up to 100,000 d, minimum of 0.25uV/d
Resolution
10,000 d @0.7uV/d NMI(S-463), OIML R76
Approvals
FCC, CE, C-tick
Zero Cancellation
+/- 2.0mV/V
Span Adjustment
0.1mV/V to 3.0mV/V
7.4V for up to 16 x 350 or 32 x 700 ohm load cells (4-wire or 6-wire plus shield)
Excitation
Maximum total load cell resistance: 1,000 ohms
24bit Sigma Delta with ±8,388,608 internal counts
A/D Type
Temperature: –10 to +50°C ambient (14 °F to 122 °F)
Operating Environment
Humidity: <90% non-condensing
LCD with 4 alpha-numeric displays and LED backlighting:
Primary display: 6 x 28.4mm (1.12") high digits with units and annunciators
2nd display: 9 x 17.6 mm (0.7") digits with units
Display
3rd display: 8 x 6.1 mm (0.2") digits
4th display: 4 x 7.6 mm (0.3") digits
Setup and Calibration
Full digital with visual prompting in plain messages
Digital Filter
Sliding window average from 0.1 to 30.0 seconds
Adjustable from +/- 2% to +/- 20% of full capacity
Zero Range
Standard Power Input
12 to 24VDC (15 VA max) - ON/OFF key with memory feature
AC power supply
AC
Input: 110/240VAC 50/60Hz Output: 12VDC 15VA
Variants
2.5AH NiMH rechargeable battery pack
Battery
Charger Input: 110/240VAC 50/60Hz Output: 12VDC
Magnetically coupled infra-red communications
Optical Data Communications
Conversion cables available for RS232 or USB
10 point linearity correction
Correction
Serial 1A: RS-232 serial port for remote display, network or printer supports.
Serial 1B: RS485 transmit only for remote display
Serial Outputs
Transmission rate: 2400, 4800, 9600 or 19200 baud
3
Assignable Function Keys
Single Range, Dual Range and Dual Interval
Operating Modes
Battery life 10 years minimum
Battery Backed Clock Calendar
Application Software
K491
Custom printing, custom unit switching, counting, manual hold, peak hold, auto output and totalising
Functions
Compensation +/- 15 degree tilt
Three step calibration process - Zero, Span, Tilt
Specialist K491 Module
Compatible Tilt Sensors
Tilt Module (M4211) is required
Rinstrum 2 Axis Tilt Sensor (M4904 +/- 10 degree tilt compensation)
HL-Planar Technik NS-10/PL2-S or NS-15/PL2-S
250
Products/Recipes
8
Set points
1
Analogue Output *
Additional Communications *
Module: RS232/RS232 Module: RS232/RS485 Module: RS485/RS485
4 Buttons
Button Input *
1
Data Storage Device *
1
Ethernet *
Housing Options
R420
R423
Case Materials
ABS
Stainless Steel
Indicator: 1kg (35 oz)
Indicator: 1.2kg (42 oz)
IP65
IP66
Packing Weights
Environmental IP Rating
(panel mounted or with rear boot)
*Optional modules
R400-702-410
Powered by TCPDF (www.tcpdf.org)