INSTALLATION GUIDE
Fixed Neck Surface VidaMount
VB_VESA_MNT_FNS
Ideal for VidaMount VESA Tablet Enclosures
VESA 100x100 & 75x75 compatible
Installation Instructions
Fixed Neck Surface Mount : VESA Compatible
If charging is desired, please prepare the extension cable and/or charging solution for the VESA tablet first.
Installing the charging solution / extension cable will be easier to do now than it will be to do later.
VESA : 75 x 75 (3" x 3") and 100 x 100 (4" x 4") compatible.
(8) M4x12 Philips
Countersink Head Screws
VESA Mounting
Plate
Base
Plate
Fixed Neck
Tube
(4) M4x50 Socket
Head Cap Screw
(4) M4X8 Phillips Pan
Head Screws
(3) M5x30 Philips
Countersink Head
Wood Screws
(4) M4
Washers
M3 Hex
Wrench
(4) M4 Nuts
1 Assemble the Fixed Neck Tube & VESA Mounting Plate
(4) M4x12 Philips
Countersink Head Screws
Install (4) M4x12 Philips
Countersink Head Screws through
the VESA Mounting Plate, and into
the top of the Fixed Neck Tube.
VESA Mounting
Plate
Fixed Neck
Tube
2 Decide how the surface mount sould be secured
OPTION 1 : On-Surface Mount
B. Mark the (3) top
surface holes
IMPORTANT: Mounting surface thickness cannot exceed 2.5”
A. Use Base Plate as a
drilling template
(3) M5x30 Philips
Countersink Head
Wood Screws
Base Plate
4mm (1/6”)
wood bit
If needed, drill a 5/8” [16mm] hole in the center,
so that the USB cable can pass through the surface.
(4) M4x12 Philips
Countersink
Head Screws
[Continued] 2 Decide how the surface mount sould be secured
OPTION 2 : Behind-Surface Mount
A. Use Base Plate as a
drilling template
B. Mark the (4)
thru holes
4mm (1/6”)
wood bit
If needed, drill a 5/8” [16mm] hole in
the center, so that the USB cable can
pass through the surface.
IMPORTANT: Mounting Surface thickness cannot exceed 2.5”
Assemble with the
base piece, from
behind/beneath
the surface
M4 Washer
M4 Nut
M4X50 Socket Head Screws
Use M3 Allen Wrench to tighten
3 Install USB Cable / Wire Run
4 Install VESA-Ready Enclosure
M4x8
Philips Head Screws
5 OPTIONAL : Install Kensington Lock
Kensington Security Slot
Kensington Lock
If using the Fixed Neck Surface
Mount with a base plate, or for
additional security, one may wish to
use the built-in Kensington security
slot with a compatible Kensington lock.