8x8 DVI Matrix Switcher with Twisted Pair Outputs
The VS−88DTP is a high−performance
matrix switcher for DVI signals. The unit
reclocks and equalizes the signal and can
route any or all inputs to any or all DGKat™
twisted pair outputs simultaneously.
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
HDTV Compatible - Not HDCP Compliant.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
Kramer Equalization & re-Klocking™ Technology - Rebuilds the digital signal integrity to travel longer distances.
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling & processing algorithm ensures Plug
and Play operation for DVI systems.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's
BC−DGKat524, BC−DGKat623 or BC−DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Flexible Control Options - Front panel, IR remote (included), RS−232 (K−Router™ Windows®−based software is
included), RS−485, Ethernet (Windows®−based Ethernet Configuration Manager & Virtual Serial Port Manager is
Output Disconnect - Each output.
Front Panel Lockout.
Memory Locations - Stores multiple switches as presets to be recalled and executed when needed.
Worldwide Power Supply - 100−240V AC.
Standard 19” Rack Mount Size - 1U. Rack “ears” included.
8 DVI−D on DVI−I Molex 24−pin (F) connectors (non−HDCP compliant), 1.2Vpp ; DDC
signal 5Vpp (TTL).
8 DGKat twisted pair on RJ−45 connectors.
4.95Gbps (1.65Gbps per graphic channel).
Supports DVI 1.1.
100−240V AC; 50/60Hz, 43VA.
Front panel buttons, infrared remote control transmitter, RS−232, RS−485 & Ethernet.
19" x 7" x 2U W, D, H.
2.5kg (5.5lbs) approx.
Power cord, infrared remote controller, rack "ears".
Up to UXGA; 1080p, 1920x1200.
Download PDF
Similar pages
PT-572+ HDMI over Twisted Pair Receiver
Kramer Electronics TP-576 video converter
PT-571 - Stathis Net
Kramer Electronics HDMI over Twisted Pair Receiver
TP-576 HDMI, Data & IR over Twisted Pair Transceiver