SRX100 Services Gateway Hardware Guide for B
and H Model Numbers
Modified: 2016-08-22
Copyright © 2016, Juniper Networks, Inc.
Juniper Networks, Inc.
1133 Innovation Way
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Copyright © 2016, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Copyright © 2016, Juniper Networks, Inc.
All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions of
that EULA.
ii
Copyright © 2016, Juniper Networks, Inc.
Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Supported Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Part 1
Overview
Chapter 1
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SRX100 Services Gateway Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SRX100 Services Gateway Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessing the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SRX100 Services Gateway Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 2
Hardware Component Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SRX100 Services Gateway LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SRX100 Services Gateway Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SRX100 Services Gateway Ethernet Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . 9
SRX100 Services Gateway Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme . . . 11
Boot Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dual-Root Partitioning Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3
Chassis Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SRX100 Services Gateway Front Panel and Back Panel Views . . . . . . . . . . . . . . . 13
SRX100 Services Gateway Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SRX100 Services Gateway Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SRX100 Services Gateway Built-In Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Part 2
Site Planning and Specifications
Chapter 4
Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Site Preparation Checklist for the SRX100 Services Gateway . . . . . . . . . . . . . . . . 21
General Site Guidelines for Installing the SRX100 Services Gateway . . . . . . . . . . 24
SRX100 Services Gateway Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SRX100 Services Gateway Cabinet Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 25
SRX100 Services Gateway Rack Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Copyright © 2016, Juniper Networks, Inc.
iii
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100
Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Chapter 5
Power Requirements and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SRX100 Services Gateway Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . 29
SRX100 Services Gateway Electrical and Power Requirements . . . . . . . . . . . . . . 30
SRX100 Services Gateway Power Specifications and Requirements . . . . . . . . . . . 31
Chapter 6
Cable Specifications and Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Interface Cable and Wire Specifications for the SRX100 Services Gateway . . . . . 33
RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port . . . . . 33
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port . . . . . . 34
Part 3
Initial Installation and Configuration
Chapter 7
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation Overview for the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . 40
Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SRX100 Services Gateway Autoinstallation Overview . . . . . . . . . . . . . . . . . . . . . . 42
Chapter 8
Unpacking the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Unpacking the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Verifying Parts Received with the SRX100 Services Gateway . . . . . . . . . . . . . . . . 44
Chapter 9
Installing the Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Preparing the SRX100 Services Gateway for Rack-Mount Installation . . . . . . . . . 47
Preparing the SRX100 Services Gateway for Desk-Mount Installation . . . . . . . . . 48
Preparing the SRX100 Services Gateway for Wall-Mount Installation . . . . . . . . . 48
Chapter 10
Installing the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installing the SRX100 Services Gateway in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installing the SRX100 Services Gateway on a Desk . . . . . . . . . . . . . . . . . . . . . . . . 52
Installing the SRX100 Services Gateway on a Wall . . . . . . . . . . . . . . . . . . . . . . . . 54
Chapter 11
Grounding the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Grounding the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Chapter 12
Connecting the SRX100 Services Gateway to External Devices . . . . . . . . . . 61
Connecting and Organizing Interface Cables to the SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Connecting the Modem at the SRX100 Services Gateway End . . . . . . . . . . . . . . . 62
Connecting the Modem to the Console Port on the SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Connecting to the CLI at the User End for the SRX100 Services Gateway . . . . . . 63
Chapter 13
Providing Power to the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . 65
Connecting the SRX100 Services Gateway to the Power Supply . . . . . . . . . . . . . 65
Powering On and Powering Off the SRX100 Services Gateway . . . . . . . . . . . . . . 66
Powering On the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Powering Off the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . 67
iv
Copyright © 2016, Juniper Networks, Inc.
Table of Contents
Chapter 14
Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
SRX100 Services Gateway Software Configuration Overview . . . . . . . . . . . . . . . . 69
Preparing the SRX100 Services Gateway for Configuration . . . . . . . . . . . . . . 69
Understanding the Factory Default Configuration . . . . . . . . . . . . . . . . . . . . . . 70
Understanding Built-In Ethernet Ports and Initial Configuration . . . . . . . . . . 70
Mapping the Chassis Cluster Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Understanding Management Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Connecting to the SRX100 Services Gateway Setup Wizard . . . . . . . . . . . . . . . . . 73
SRX100 Services Gateway Secure Web Access Overview . . . . . . . . . . . . . . . . . . . 74
Connecting an SRX100 Services Gateway to the CLI Locally . . . . . . . . . . . . . . . . . 75
Connecting an SRX100 Services Gateway to the CLI Remotely . . . . . . . . . . . . . . . 76
Viewing Factory-Default Settings of the SRX100 Services Gateway . . . . . . . . . . . 77
Performing Initial Software Configuration on the SRX100 Services Gateway
Using the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Performing Initial Software Configuration on the SRX100 Services Gateway
Using the J-Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Establishing Basic Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Configuring Basic System Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Part 4
Maintaining and Troubleshooting Components
Chapter 15
Maintaining Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Maintaining the SRX100 Services Gateway Hardware Components . . . . . . . . . . 95
Chapter 16
Troubleshooting Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Monitoring the SRX100 Services Gateway Chassis Using the CLI . . . . . . . . . . . . . 97
Monitoring the SRX100 Services Gateway Components Using LEDs . . . . . . . . . . 99
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions . . . . 101
Monitoring the SRX100 Services Gateway Power System . . . . . . . . . . . . . . . . . . 103
Using the Reset Config Button on the SRX100 Services Gateway . . . . . . . . . . . . 104
Changing the Reset Config Button Behavior on the SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Part 5
Replacing Components
Chapter 17
Contacting Customer Support and Returning Components . . . . . . . . . . . . 109
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Return Procedure for the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . 110
Information You Might Need to Supply to Juniper Networks Technical Assistance
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Locating the SRX100 Services Gateway Component Serial Number and Agency
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Packing the SRX100 Services Gateway and Components for Shipment . . . . . . . 112
Copyright © 2016, Juniper Networks, Inc.
v
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Part 6
Safety and Regulatory Compliance Information
Chapter 18
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
SRX100 Services Gateway Definition of Safety Warning Levels . . . . . . . . . . . . . . 117
SRX100 Services Gateway General Safety Guidelines and Warnings . . . . . . . . . . 119
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Restricted Access Area Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Preventing Electrostatic Discharge Damage to the Services Gateway . . . . . 122
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines . . . . 123
Chapter 19
Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
SRX100 Services Gateway Fire Safety Requirements . . . . . . . . . . . . . . . . . . . . . . 125
Chapter 20
Installation Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . 127
SRX100 Services Gateway Installation Safety Guidelines and Warnings . . . . . . . 127
Chapter 21
Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . 133
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings . . . . 133
Laser and LED Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . 133
General Laser Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Class 1 Laser Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Class 1 LED Product Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Laser Beam Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Radiation from Open Port Apertures Warning . . . . . . . . . . . . . . . . . . . . 135
Chapter 22
Maintenance and Operational Safety Guidelines and Warnings . . . . . . . . 137
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Battery Handling Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Chapter 23
Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
SRX100 Services Gateway Electrical Safety Guidelines and Warnings .
Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . .
In Case of Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Electrical Safety Guidelines and Warnings . . . . . . . . .
Chapter 24
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
143
143
143
143
Agency Approvals and Regulatory Compliance Information . . . . . . . . . . . 145
SRX100 Services Gateway Agency Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
SRX100 Services Gateway Compliance Statements for EMC Requirements . . . 146
Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Korean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
United States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
SRX100 Services Gateway Compliance Statements for Environmental
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
vi
Copyright © 2016, Juniper Networks, Inc.
Table of Contents
Part 7
Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Copyright © 2016, Juniper Networks, Inc.
vii
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
viii
Copyright © 2016, Juniper Networks, Inc.
List of Figures
Part 1
Overview
Chapter 2
Hardware Component Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 1: SRX100 Services Gateway Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 2: SRX100 Services Gateway Ethernet Port LEDs . . . . . . . . . . . . . . . . . . . . 10
Chapter 3
Chassis Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 3: SRX100 Services Gateway Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Figure 4: SRX100 Services Gateway Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Part 2
Site Planning and Specifications
Chapter 4
Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 5: SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Chapter 6
Cable Specifications and Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 6: Ethernet Cable Connector (RJ-45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 7: Console Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Part 3
Initial Installation and Configuration
Chapter 10
Installing the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 8: Installing the SRX100 Services Gateway in a Rack . . . . . . . . . . . . . . . . . . 51
Figure 9: Hanging the SRX100 Services Gateway in a Rack . . . . . . . . . . . . . . . . . . 52
Figure 10: Installing the SRX100 Services Gateway on a Desk . . . . . . . . . . . . . . . . 53
Figure 11: Installing the SRX100 Services Gateway on a Wall . . . . . . . . . . . . . . . . . 54
Figure 12: Hanging the SRX100 Services Gateway on a Wall . . . . . . . . . . . . . . . . . 55
Chapter 11
Grounding the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Figure 13: Grounding the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . 57
Chapter 13
Providing Power to the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . 65
Figure 14: Connecting the Services Gateway to the Power Supply . . . . . . . . . . . . 65
Chapter 14
Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Figure 15: Connecting to the Ethernet Port on an SRX100 Services Gateway . . . . 73
Figure 16: Connecting to the Console Port on an SRX100 Services Gateway . . . . 75
Part 5
Replacing Components
Chapter 17
Contacting Customer Support and Returning Components . . . . . . . . . . . . 109
Figure 17: Location of SRX100 Services Gateway Serial Number and Agency
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Copyright © 2016, Juniper Networks, Inc.
ix
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Part 6
Safety and Regulatory Compliance Information
Chapter 18
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Figure 18: Placing a Component into an Electrostatic Bag . . . . . . . . . . . . . . . . . . 122
x
Copyright © 2016, Juniper Networks, Inc.
List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Part 1
Overview
Chapter 1
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 3: SRX100 Services Gateway Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 4: SRX100 Services Gateway Hardware Features . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2
Hardware Component Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 5: SRX100 Services Gateway Front Panel LEDs . . . . . . . . . . . . . . . . . . . . . . . 8
Table 6: SRX100 Services Gateway Built-In Ethernet Port LEDs . . . . . . . . . . . . . . 10
Chapter 3
Chassis Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 7: SRX100 Services Gateway Front Panel Components . . . . . . . . . . . . . . . . 13
Table 8: SRX100 Services Gateway Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table 9: SRX100 Services Gateway Built-In Hardware Interfaces . . . . . . . . . . . . . 15
Part 2
Site Planning and Specifications
Chapter 4
Planning and Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 10: Site Preparation Checklist for Services Gateway Installation . . . . . . . . . 21
Table 11: SRX100 Services Gateway Specifications . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 12: SRX100 Services Gateway Cabinet Requirements . . . . . . . . . . . . . . . . . 26
Table 13: Rack Requirements for the Services Gateway . . . . . . . . . . . . . . . . . . . . . 27
Table 14: Clearance Requirements for the SRX100 Services Gateway . . . . . . . . . 28
Chapter 5
Power Requirements and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 15: Site Electrical Wiring Guidelines for the Services Gateway . . . . . . . . . . . 29
Table 16: Power System Electrical Specifications for the SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 6
Cable Specifications and Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Table 17: Cable and Wire Specifications for Ports . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Table 18: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port . . . . . 34
Table 19: RJ-45 Connector Pinouts for the Services Gateway Console Port . . . . . 34
Part 3
Initial Installation and Configuration
Chapter 7
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 20: Installation Process Order for the SRX100 Services Gateway . . . . . . . . 40
Copyright © 2016, Juniper Networks, Inc.
xi
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 21: Required Tools and Parts for Installing and Maintaining the SRX100
Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chapter 8
Unpacking the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table 22: Parts List for a Fully Configured SRX100 Services Gateway . . . . . . . . . . 44
Table 23: Accessory Parts List for the SRX100 Services Gateway . . . . . . . . . . . . . 44
Chapter 11
Grounding the SRX100 Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Table 24: SRX100 Services Gateway Grounding Components . . . . . . . . . . . . . . . 58
Table 25: Grounding Cable Specifications for the Services Gateway . . . . . . . . . . 58
Chapter 12
Connecting the SRX100 Services Gateway to External Devices . . . . . . . . . . 61
Table 26: Port Settings for Configuring the Modem on the Services Gateway
End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Table 27: Port Settings for Connecting to the CLI at User End . . . . . . . . . . . . . . . . 64
Chapter 14
Performing Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table 28: Mapping the Chassis Cluster Ports on an SRX100 Services
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 29: Console Port Settings for the SRX100 Services Gateway . . . . . . . . . . . 76
Table 30: Required Setup Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Table 31: Optional Setup Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Part 4
Maintaining and Troubleshooting Components
Chapter 15
Maintaining Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Table 32: Maintenance Procedures for the SRX100 Services Gateway Hardware
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Chapter 16
Troubleshooting Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table 33: Services Gateway LED Status on Startup . . . . . . . . . . . . . . . . . . . . . . . . 99
Table 34: Component LEDs on the Services Gateway . . . . . . . . . . . . . . . . . . . . . 100
Table 35: SRX100 Services Gateway Chassis Alarm Conditions and Corrective
Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Table 36: Services Gateway Power LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
xii
Copyright © 2016, Juniper Networks, Inc.
About the Documentation
•
Documentation and Release Notes on page xiii
•
Supported Platforms on page xiii
•
Documentation Conventions on page xiii
•
Documentation Feedback on page xv
•
Requesting Technical Support on page xvi
Documentation and Release Notes
®
To obtain the most current version of all Juniper Networks technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at http://www.juniper.net/books.
Supported Platforms
For the features described in this document, the following platforms are supported:
•
SRX100
Documentation Conventions
Table 1 on page xiv defines notice icons used in this guide.
Copyright © 2016, Juniper Networks, Inc.
xiii
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 1: Notice Icons
Icon
Meaning
Description
Informational note
Indicates important features or instructions.
Caution
Indicates a situation that might result in loss of data or hardware damage.
Warning
Alerts you to the risk of personal injury or death.
Laser warning
Alerts you to the risk of personal injury from a laser.
Tip
Indicates helpful information.
Best practice
Alerts you to a recommended use or implementation.
Table 2 on page xiv defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
Convention
Description
Examples
Bold text like this
Represents text that you type.
To enter configuration mode, type the
configure command:
user@host> configure
Fixed-width text like this
Italic text like this
Italic text like this
xiv
Represents output that appears on the
terminal screen.
user@host> show chassis alarms
•
Introduces or emphasizes important
new terms.
•
•
Identifies guide names.
A policy term is a named structure
that defines match conditions and
actions.
•
Identifies RFC and Internet draft titles.
•
Junos OS CLI User Guide
•
RFC 1997, BGP Communities Attribute
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
No alarms currently active
Configure the machine’s domain name:
[edit]
root@# set system domain-name
domain-name
Copyright © 2016, Juniper Networks, Inc.
About the Documentation
Table 2: Text and Syntax Conventions (continued)
Convention
Description
Examples
Text like this
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
•
To configure a stub area, include the
stub statement at the [edit protocols
ospf area area-id] hierarchy level.
•
The console port is labeled CONSOLE.
< > (angle brackets)
Encloses optional keywords or variables.
stub <default-metric metric>;
| (pipe symbol)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
broadcast | multicast
# (pound sign)
Indicates a comment specified on the
same line as the configuration statement
to which it applies.
rsvp { # Required for dynamic MPLS only
[ ] (square brackets)
Encloses a variable for which you can
substitute one or more values.
community name members [
community-ids ]
Indention and braces ( { } )
Identifies a level in the configuration
hierarchy.
; (semicolon)
Identifies a leaf statement at a
configuration hierarchy level.
(string1 | string2 | string3)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
GUI Conventions
Bold text like this
Represents graphical user interface (GUI)
items you click or select.
> (bold right angle bracket)
Separates levels in a hierarchy of menu
selections.
•
In the Logical Interfaces box, select
All Interfaces.
•
To cancel the configuration, click
Cancel.
In the configuration editor hierarchy,
select Protocols>Ospf.
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can provide feedback by using either of the following
methods:
•
Online feedback rating system—On any page of the Juniper Networks TechLibrary site
at http://www.juniper.net/techpubs/index.html, simply click the stars to rate the content,
and use the pop-up form to provide us with information about your experience.
Alternately, you can use the online feedback form at
http://www.juniper.net/techpubs/feedback/.
Copyright © 2016, Juniper Networks, Inc.
xv
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
E-mail—Send your comments to techpubs-comments@juniper.net. Include the document
or topic name, URL or page number, and software version (if applicable).
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or Partner Support Service
support contract, or are covered under warranty, and need post-sales technical support,
you can access our tools and resources online or open a case with JTAC.
•
JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
•
Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/.
•
JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•
Find CSC offerings: http://www.juniper.net/customers/support/
•
Search for known bugs: http://www2.juniper.net/kb/
•
Find product documentation: http://www.juniper.net/techpubs/
•
Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•
Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
•
Search technical bulletins for relevant hardware and software notifications:
http://kb.juniper.net/InfoCenter/
•
Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
•
Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
xvi
•
Use the Case Management tool in the CSC at http://www.juniper.net/cm/.
•
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
Copyright © 2016, Juniper Networks, Inc.
About the Documentation
For international or direct-dial options in countries without toll-free numbers, see
http://www.juniper.net/support/requesting-support.html.
Copyright © 2016, Juniper Networks, Inc.
xvii
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
xviii
Copyright © 2016, Juniper Networks, Inc.
PART 1
Overview
•
System Overview on page 3
•
Hardware Component Overview on page 7
•
Chassis Description on page 13
Copyright © 2016, Juniper Networks, Inc.
1
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
2
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 1
System Overview
•
SRX100 Services Gateway Description on page 3
•
SRX100 Services Gateway Features and Functions on page 4
SRX100 Services Gateway Description
This topic includes the following sections:
•
About the SRX100 Services Gateway on page 3
•
SRX100 Services Gateway Models on page 3
•
Accessing the SRX100 Services Gateway on page 4
About the SRX100 Services Gateway
The Juniper Networks SRX100 Services Gateway offers features that provide complete
functionality and flexibility for delivering secure Internet and intranet access. The services
gateway offers stable, reliable, and efficient IP routing in addition to switching support
and LAN connectivity. The device provides IP Security (IPsec), virtual private network
(VPN), and firewall services for small and medium-sized companies and enterprise
branch and remote offices. The SRX100 Services Gateway can be connected directly to
traditional private networks such as leased lines, Frame Relay, or Multi Protocol Label
Switching (MPLS) or to the public Internet.
The SRX100 Services Gateway runs the Junos operating system (Junos OS).
SRX100 Services Gateway Models
The following are the two models of the SRX100 Services Gateway available with 1 GB
memory. For information on the models with 2 GB memory, see SRX100 Services Gateway
Hardware Guide for H2 Model Numbers.
Table 3: SRX100 Services Gateway Models
Product Name
Device Type
Model Number
SRX100 Services Gateway
Low Memory
SRX100B
SRX100 Services Gateway
High Memory
SRX100H
Copyright © 2016, Juniper Networks, Inc.
3
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
NOTE: You can upgrade from an SRX100 Services Gateway Low Memory
version to a High Memory version through a license key. You need not order
a separate High Memory device.
NOTE: SRX100H model provides additional security features such as Unified
Threat Management (UTM), which consists of IPS antispam, antivirus, and
Web filtering.
NOTE: The SRX100 Services Gateway High Memory model ships with a
license key.
All SRX100 Services Gateways run the Junos OS.
Accessing the SRX100 Services Gateway
Two user interfaces are available for monitoring, configuring, troubleshooting, and
managing the SRX100 Services Gateway:
Related
Documentation
•
J-Web interface: Web-based graphical interface that allows you to operate a services
gateway without commands. The J-Web interface provides access to all Junos OS
functionality and features.
•
Junos OS command-line interface (CLI): Juniper Networks command shell that runs
on top of a UNIX-based operating system kernel. The CLI is a straightforward command
interface. On a single line, you type commands that are executed when you press the
Enter key. The CLI provides command Help and command completion.
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Features and Functions on page 4
•
Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version on page 90
SRX100 Services Gateway Features and Functions
The SRX100 Services Gateway is a security optimized, fixed processing system that
provides the following features for the Low Memory and High Memory models listed in
Table 4 on page 5. For information on the models with 2 GB memory, see SRX100 Services
Gateway Hardware Guide for H2 Model Numbers.
4
Copyright © 2016, Juniper Networks, Inc.
Chapter 1: System Overview
Table 4: SRX100 Services Gateway Hardware Features
SRX100 Services Gateway
Low Memory
SRX100 Services Gateway
High Memory
DDR Memory
512 MB (software upgradable to
High Memory through a license
key)
1 GB
Power supply adapter
30 watts
30 watts
AC input voltage
100 to 240 VAC
100 to 240 VAC
Fast Ethernet ports
8
8
Console port
1
1
USB port
1
1
LEDs
4
4
NAND flash
1 GB
1 GB
Features
For more details on Junos OS features and licenses for the SRX100 Services Gateway,
see the Junos OS Administration Guide for Security Devices.
For more information on upgrading an SRX100 Services Gateway Low Memory to High
Memory, see “Upgrading the SRX100 Services Gateway Low Memory Version to a High
Memory Version” on page 90.
Related
Documentation
•
SRX100 Services Gateway Description on page 3
•
SRX100 Services Gateway Specifications on page 24
•
Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version on page 90
Copyright © 2016, Juniper Networks, Inc.
5
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
6
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 2
Hardware Component Overview
•
SRX100 Services Gateway LEDs on page 7
•
SRX100 Services Gateway Power Supply on page 10
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
SRX100 Services Gateway LEDs
This topic includes the following sections:
•
SRX100 Services Gateway Front Panel LEDs on page 7
•
SRX100 Services Gateway Ethernet Port LEDs on page 9
SRX100 Services Gateway Front Panel LEDs
Figure 1 on page 7 illustrates the front panel LEDs of the SRX100 Services Gateway.
NOTE: The numbers in Figure 1 on page 7 correspond to the numbers in
Table 5 on page 8.
Figure 1: SRX100 Services Gateway Front Panel LEDs
Table 5 on page 8 lists the LED indicators on the SRX100 Services Gateway front panel.
Copyright © 2016, Juniper Networks, Inc.
7
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 5: SRX100 Services Gateway Front Panel LEDs
Number
Component
Description
Usage
1
Alarm LED
The Alarm LED has
the following indicator
colors:
The Alarm LED can be
used to gather
information on major
or minor alarms or to
determine if the
device is functioning
normally.
2
8
Power LED
•
Solid red indicates
a major alarm.
•
Solid amber
indicates a minor
alarm.
•
Off indicates that
there are currently
no alarms.
The Power LED has
the following indicator
colors:
•
Solid green
indicates that the
device is
functioning
normally.
•
Solid amber
indicates that the
power button has
been pressed and
quickly released.
The device is
gracefully shutting
down.
•
Off indicates that
the device is not
receiving power.
The Power LED can be
used to determine if
the device is receiving
power.
Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Hardware Component Overview
Table 5: SRX100 Services Gateway Front Panel LEDs (continued)
Number
Component
Description
Usage
3
HA LED
The HA LED has the
following indicator
colors:
The HA LED can be
used to determine if
chassis clustering is
enabled on the device.
4
Status LED
•
Solid green
indicates that all
chassis clustering
links are available.
•
Solid red indicates
that the chassis
clustering links are
not working as
expected.
•
Solid amber
indicates that some
chassis clustering
links are not
working as
expected.
•
Off indicates that
chassis clustering is
not enabled.
The Status LED has
the following indicator
colors:
•
Solid green
indicates that the
device is
functioning
normally.
•
Solid amber
indicates that the
device is starting
up.
•
Solid red indicates
that an error is
detected in the
device.
The Status LED can
be used to determine
whether the device is
starting up, is
functioning normally,
or has failed.
SRX100 Services Gateway Ethernet Port LEDs
On the SRX100 Services Gateway, each Fast Ethernet port has one functional LED on
the left side that indicates Link and Activity. In Figure 2 on page 10, this LED is marked as
1.
Copyright © 2016, Juniper Networks, Inc.
9
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Figure 2: SRX100 Services Gateway Ethernet Port LEDs
The Table 6 on page 10 applies only to the TX/RX/LINK LED marked 1. Table 6 on page 10
describes the states of this LED.
Table 6: SRX100 Services Gateway Built-In Ethernet Port LEDs
Function
Color
State
Description
TX/RX/LINK
Green
Blinking
Link is active. Data
communication is taking
place.
Steady
Link is active. No data
communication is taking
place.
Off
Link is inactive.
Unlit
NOTE: The LED marked as 2 in Figure 2 on page 10 is not functional in this
release.
Related
Documentation
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Front Panel and Back Panel Views on page 13
•
SRX100 Services Gateway Built-In Interfaces on page 15
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
•
SRX100 Services Gateway Power Supply on page 10
SRX100 Services Gateway Power Supply
The power supply for the SRX100 Services Gateway is external. You must use the power
supply adapter provided by Juniper Networks to provide power to the services gateway.
Related
Documentation
10
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Front Panel and Back Panel Views on page 13
•
SRX100 Services Gateway LEDs on page 7
•
SRX100 Services Gateway Built-In Interfaces on page 15
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Hardware Component Overview
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
SRX100 Services Gateway Electrical and Power Requirements on page 30
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme
This topic includes the following sections:
•
Boot Devices on page 11
•
Dual-Root Partitioning Scheme on page 11
Boot Devices
The SRX100 Services Gateway can boot from the following storage media (in the order
of priority):
•
Internal NAND Flash (default; always present)
•
USB storage key (alternate)
Dual-Root Partitioning Scheme
Dual-root partitions allow the SRX100 Services Gateways to remain functional if there
is file system corruption and facilitate easy recovery of the corrupted file system.
The dual-root partitioning scheme keeps the primary and backup Junos OS images in
two independently bootable root partitions. If the primary root partition becomes
corrupted, the system will be able to boot from the backup Junos OS image located in
the other root partition and remain fully functional.
When the SRX100 Services Gateway powers up, it tries to boot the Junos OS from the
default storage media. If the device fails to boot from the default storage media, it tries
to boot from the alternate storage media. With the dual-root partitioning scheme, the
SRX100 Services Gateway first tries to boot the Junos OS from the primary root partition
and then from the backup root partition on the default storage media. If both primary
and backup root partitions of a media fail to boot, then the device tries to boot from the
next available type of storage media. The SRX100 Services Gateway remains fully
functional even if it boots the Junos OS from the backup root partition of storage media.
NOTE: SRX Series devices that ship from the factory with Junos OS Release
10.0 are formatted with the dual-root partitioning scheme.
The SRX100 Services Gateways that are running Junos OS Release 9.6 or earlier use the
single-root partitioning scheme. While upgrading these devices to Junos OS Release 10.0,
you can choose to format the storage media with dual-root partitions (strongly
recommended) or retain the existing single-root partitioning.
For instructions on upgrading to Junos OS Release 10.0, see the following topics:
•
Initial Configuration for Security Devices
Copyright © 2016, Juniper Networks, Inc.
11
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Related
Documentation
12
•
Monitoring and Troubleshooting for Security Devices
•
Installation Overview for the SRX100 Services Gateway on page 40
•
SRX100 Services Gateway Software Configuration Overview on page 69
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 3
Chassis Description
•
SRX100 Services Gateway Front Panel and Back Panel Views on page 13
•
SRX100 Services Gateway Built-In Interfaces on page 15
SRX100 Services Gateway Front Panel and Back Panel Views
This topic contains views of the front and back panels of the SRX100 Services Gateway.
This topic includes the following sections:
•
SRX100 Services Gateway Front Panel on page 13
•
SRX100 Services Gateway Back Panel on page 14
SRX100 Services Gateway Front Panel
Figure 3 on page 13 shows the front panel of the SRX100 Services Gateway.
g031001
Figure 3: SRX100 Services Gateway Front Panel
Table 7 on page 13 lists the front panel components of the services gateway.
Table 7: SRX100 Services Gateway Front Panel Components
Number
Component
1
Power button
2
LEDs: Alarm, Status, Power, HA
3
Reset Config button
Copyright © 2016, Juniper Networks, Inc.
13
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 7: SRX100 Services Gateway Front Panel Components (continued)
Number
Component
4
Universal serial bus (USB) port
5
Console port
6
Fast Ethernet ports
For more information on the front panel components, see the following topics:
•
SRX100 Services Gateway Built-In Interfaces on page 15
•
SRX100 Services Gateway LEDs on page 7
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
SRX100 Services Gateway Back Panel
Figure 4 on page 14 illustrates the back panel of the SRX100 Services Gateway.
g031002
Figure 4: SRX100 Services Gateway Back Panel
Table 8 on page 14 lists the components available on the back panel of the SRX100
Services Gateway.
Table 8: SRX100 Services Gateway Back Panel
14
Number
Component
1
Lock
2
Grounding point
3
Cable tie holder
4
Power supply point
Copyright © 2016, Juniper Networks, Inc.
Chapter 3: Chassis Description
NOTE: The cable tie holder provides support for holding the power cord on
the power supply point.
The lock provides the option to lock and secure the device to the installation
site.
Related
Documentation
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Built-In Interfaces on page 15
•
SRX100 Services Gateway LEDs on page 7
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
•
SRX100 Services Gateway Power Supply on page 10
SRX100 Services Gateway Built-In Interfaces
Table 9 on page 15 summarizes the interface ports supported on the SRX100 Services
Gateway.
Table 9: SRX100 Services Gateway Built-In Hardware Interfaces
Interface Type
Specifications
Description
Fast Ethernet
The Fast Ethernet ports:
The Fast Ethernet ports can
be used:
Copyright © 2016, Juniper Networks, Inc.
•
Consist of eight fixed ports
•
Are labeled as port 0/0 to
port 0/7 on the front panel
•
•
Provide link speeds of
10/100 Mbps
To provide LAN connectivity
to hubs, switches, local
servers, and workstations.
•
•
Operate in full-duplex and
half-duplex modes
To forward incoming data
packets to the device.
•
•
Support flow control
To receive outgoing data
packets from the device.
•
Support autonegotiation
•
Support autosensing
15
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 9: SRX100 Services Gateway Built-In Hardware
Interfaces (continued)
Interface Type
Specifications
Description
Universal Serial Bus (USB)
The USB port:
The USB port can be used:
•
Consists of one port
•
•
Supports the following
modes:
•
•
Full speed
•
High speed
Complies with USB revision
2.0
NOTE: You must install and
configure the USB storage
device on the USB port to
use it as secondary boot
device. Additionally, the
USB device must have
Junos installed.
•
Console
To support a USB storage
device that functions as a
secondary boot device in
case of internal flash failure
on startup, if the USB
storage device is installed
and configured
To provide the USB
interfaces that are used to
communicate with many
types of Juniper-supported
USB storage devices
The console port:
The console port can be used:
•
Consists of one port
•
•
Uses an RJ-45 serial cable
connector
To provide the console
interface.
•
To function as a
management port to log
into a device directly.
•
To configure the device
using the CLI.
•
Supports the RS-232
(EIA-232) standard
NOTE: The Reset Config button is used to remove the current configuration
and reset the device to the default configuration.
The button is recessed in the front panel to prevent it from being pressed
accidentally.
CAUTION: Pressing and holding the Reset Config button for 15 seconds or
more deletes all configurations on the device and loads and commits the
factory configuration.
Related
Documentation
16
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Front Panel and Back Panel Views on page 13
Copyright © 2016, Juniper Networks, Inc.
Chapter 3: Chassis Description
•
SRX100 Services Gateway LEDs on page 7
•
SRX100 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11
•
SRX100 Services Gateway Power Supply on page 10
Copyright © 2016, Juniper Networks, Inc.
17
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
18
Copyright © 2016, Juniper Networks, Inc.
PART 2
Site Planning and Specifications
•
Planning and Preparing the Site on page 21
•
Power Requirements and Specifications on page 29
•
Cable Specifications and Pinouts on page 33
Copyright © 2016, Juniper Networks, Inc.
19
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
20
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 4
Planning and Preparing the Site
•
Site Preparation Checklist for the SRX100 Services Gateway on page 21
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Cabinet Requirements on page 25
•
SRX100 Services Gateway Rack Requirements on page 26
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
Site Preparation Checklist for the SRX100 Services Gateway
The checklist in Table 10 on page 21 summarizes the tasks you need to perform when
preparing a site for installing the SRX100 Services Gateway.
Table 10: Site Preparation Checklist for Services Gateway Installation
Item or Task
Additional
Information
Performed By
Date
Notes
Environment
Verify that
environmental factors
such as temperature
and humidity do not
exceed device
tolerances.
“SRX100
Services
Gateway
Specifications”
on page 24
Power
Copyright © 2016, Juniper Networks, Inc.
21
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 10: Site Preparation Checklist for Services Gateway
Installation (continued)
Item or Task
•
Measure the distance
between the external
power sources and
the device installation
site.
•
Locate sites for
connection of system
grounding.
•
Calculate the power
consumption and
requirements.
Additional
Information
Performed By
Date
Notes
“SRX100
Services
Gateway Site
Electrical Wiring
Guidelines” on
page 29
“SRX100
Services
Gateway Power
Specifications
and
Requirements”
on page 31
Rack Requirements
Verify that your rack
meets the minimum
requirements.
“SRX100
Services
Gateway Rack
Requirements”
on page 26
Rack Installation
•
Plan the rack location,
including required
space clearances.
•
Secure the rack to the
floor and building
structure.
“Preparing the
SRX100
Services
Gateway for
Rack-Mount
Installation” on
page 47
Cabinet Requirements
•
Verify that your
cabinet meets the
minimum
requirements.
•
Plan the cabinet
location, including
required space
clearances.
“SRX100
Services
Gateway
Cabinet
Requirements”
on page 25
Wall Installation
22
Copyright © 2016, Juniper Networks, Inc.
Chapter 4: Planning and Preparing the Site
Table 10: Site Preparation Checklist for Services Gateway
Installation (continued)
Item or Task
•
Verify that the area
selected meets the
minimum
requirements.
•
Verify that you have
the required hardware
to proceed with the
installation.
Additional
Information
Performed By
Date
Notes
“Preparing the
SRX100
Services
Gateway for
Wall-Mount
Installation” on
page 48
Desktop Installation
•
Verify that the area
selected meets the
minimum
requirements.
•
Plan the installation
location, including
required space
clearances and
airflow requirements.
“Preparing the
SRX100
Services
Gateway for
Desk-Mount
Installation” on
page 48
Cables
Related
Documentation
•
Acquire cables and
connectors.
•
Review the maximum
distance allowed for
each cable. Choose
the length of cable
based on the distance
between the
hardware
components being
connected.
•
Plan the cable routing
and management.
“Interface Cable
and Wire
Specifications
for the SRX100
Services
Gateway” on
page 33
•
SRX100 Services Gateway Specifications on page 24
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
•
Installation Overview for the SRX100 Services Gateway on page 40
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
SRX100 Services Gateway Cabinet Requirements on page 25
•
SRX100 Services Gateway Rack Requirements on page 26
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
Copyright © 2016, Juniper Networks, Inc.
23
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
General Site Guidelines for Installing the SRX100 Services Gateway
Keep the following precautions in mind to help you plan an acceptable operating
environment for your SRX100 Services Gateway and avoid environmentally caused
equipment failures:
•
For the operating temperature of the services gateway to be optimal, the airflow around
the chassis must be unrestricted. Allow sufficient clearance between the front and
back of the chassis and adjacent equipment. Ensure that there is adequate circulation
in the installation location.
•
Follow the ESD procedures to avoid damaging equipment. Static discharge can cause
components to fail completely or intermittently over time.
NOTE: The SRX100 Services Gateway does not include a fan and does not
generate any acoustic noise.
Related
Documentation
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
•
SRX100 Services Gateway Cabinet Requirements on page 25
•
SRX100 Services Gateway Rack Requirements on page 26
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
SRX100 Services Gateway Specifications
The SRX100 Services Gateway chassis is a rigid sheet metal structure that houses all
the other hardware components (see Figure 5 on page 25).
Table 11 on page 24 provides information on the physical specifications of the device.
Table 11: SRX100 Services Gateway Specifications
24
Specification
Value
Chassis height
1.38 in. (35 mm)
Chassis width
8.5 in. (216 mm)
Chassis depth
5.79 in. (147 mm)
Chassis weight
1.86 lb (844 g)
Average power consumption
•
SRX100 Services Gateway Low Memory model: 10 watts
•
SRX100 Services Gateway High Memory model: 10 watts
Copyright © 2016, Juniper Networks, Inc.
Chapter 4: Planning and Preparing the Site
Table 11: SRX100 Services Gateway Specifications (continued)
Specification
Value
Temperature
Normal operation ensured in temperature range of 32°F
(0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping container:
–40°F (–40°C) to 158°F (70°C)
NOTE: The SRX100 Services Gateway operating
temperature is 35°C when installed in a rack.
Maximum thermal output
The maximum thermal values for the two models of services
gateways are as follows:
•
Low Memory — AC power: 80 BTU/hour (21.5 W)
•
High Memory — AC power: 80 BTU/hour (21.5 W)
NOTE: These specifications are estimates and subject to
change.
Figure 5: SRX100 Services Gateway
CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
Related
Documentation
•
SRX100 Services Gateway Description on page 3
•
SRX100 Services Gateway Front Panel and Back Panel Views on page 13
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
SRX100 Services Gateway Cabinet Requirements
The SRX100 Services Gateway can be installed in a standard 31.5 in. (800 mm) or larger
enclosed cabinet. Table 12 on page 26 provides the details on cabinet size, clearance,
and airflow requirements.
Copyright © 2016, Juniper Networks, Inc.
25
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 12: SRX100 Services Gateway Cabinet Requirements
Cabinet
Requirements
Cabinet size
Specifications
19 in. (48.3 cm) as defined in Cabinets, Racks, Panels, and Associated
Equipment (document number EIA-310–D) published by the Electronics
Industry Association (http://www.eia.org).
You can mount the gateway horizontally in the cabinet.
Clearance
requirements
•
The cabinet is at least 1 U (1.75 in. or 4.5 cm) high.
•
The outer edges of the mounting brackets extend the width of either chassis
to 19 in. (48.3 cm), and the front of the chassis extends approximately 0.5
in. (1.27 cm) beyond the mounting brackets.
•
The minimum total clearance inside the cabinet is 30.7 in. (78 cm) between
the inside of the front door and the inside of the rear door.
NOTE: The holes for the mounting brackets chassis are spaced 1.25 in. (3.2
cm) apart, measured from the center of the hole.
Cabinet airflow
requirements
•
Ensure sufficient ventilation through the cabinet is sufficient to prevent
overheating.
•
Ensure adequate cool air supply to dissipate the thermal output of the
device.
•
Install the device as close as possible to the front of the cabinet so that
the cable management system clears the inside of the front door. Installing
the chassis close to the front of the cabinet maximizes the clearance in
the rear of the cabinet for critical airflow.
•
Route and dress all cables to minimize the blockage of airflow to and from
the chassis.
NOTE: A cabinet larger than the minimum required provides better airflow
and reduces the chance of overheating.
Related
Documentation
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
SRX100 Services Gateway Rack Requirements on page 26
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
SRX100 Services Gateway Rack Requirements
The services gateway can be installed in a rack. Many types of racks are acceptable,
including front-mount racks and four-post (telco) racks.
NOTE: The services gateway cannot be center mounted in a rack.
Table 13 on page 27 provides the details of requirements for rack size, clearance, airflow,
spacing of mounting brackets and flange holes, and connecting to the building structure.
26
Copyright © 2016, Juniper Networks, Inc.
Chapter 4: Planning and Preparing the Site
Table 13: Rack Requirements for the Services Gateway
Rack Requirement
Specifications
Size
A 19 in. (48.3 cm) rack as defined in Cabinets, Racks, Panels, and Associated
Equipment (document number EIA-310-D) published by the Electronics
Industry Association (http://www.eia.org).
Clearance
•
The outer edges of the mounting brackets extend the width of either
chassis to 19 in. (48.3 cm).
•
The front of the chassis extends approximately 0.5 in. (1.27 cm) beyond
the mounting ears.
•
Maximum permissible ambient temperature when two devices are
placed side by side in a 19 in. rack is 40° C.
•
The holes within each rack set are spaced at 1 U [1.75 in. (4.5 cm)]. The
device can be mounted in any rack that provides holes or hole patterns
spaced at 1-U [1.75 in. (4.5 cm)] increments.
•
The mounting brackets and front-mount flanges used to attach the
chassis to a rack are designed to fasten to holes spaced at rack
distances of 1 U (1.75 in.).
•
The mounting holes in the mounting brackets provided with the device
are spaced 1.25 in. (3.2 cm) apart (top and bottom mounting hole).
Spacing of Mounting
Bracket and Flange
Holes
Connecting to the
Building Structure
Related
Documentation
Always secure the rack in which you are installing the services gateway
to the structure of the building. If your geographical area is subject to
earthquakes, bolt the rack to the floor. For maximum stability, also secure
the rack to ceiling brackets.
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
SRX100 Services Gateway Cabinet Requirements on page 25
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway
When planning the installation site for the SRX100 Services Gateway, you need to allow
sufficient clearance around the device.
When planning the installation site for the services gateway, consider the following:
•
For the operating temperature of the services gateway to be optimal, the airflow around
the chassis must be unrestricted.
•
For service personnel to remove and install hardware components, there must be
adequate space at the front and back of the device. Allow at least 24 in. (61 cm) both
in front of and behind the device.
•
If you are mounting the device in a rack with other equipment, or if you are placing it
on the desktop near other equipment, ensure that the exhaust from other equipment
does not blow into the intake vents of the chassis.
Copyright © 2016, Juniper Networks, Inc.
27
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 14 on page 28 provides information on the clearance requirements for maintaining
the optimum airflow and the distances for facilitating easy maintenance of the device.
Table 14: Clearance Requirements for the SRX100 Services Gateway
Location
Recommended
Clearance
Front of the chassis
2.5 in. (6.35 cm)
Space for service personnel to
remove and install hardware
components
Rear of the chassis
2.5 in. (6.35 cm)
Space for service personnel to
remove and install hardware
components
Between front-mounting flange
and rack or cabinet edge
2.5 in. (6.35 cm)
Space for cable management and
organization
Between side of the chassis and
any non-heat-producing
surface such as a wall or
cabinet side
2.5 in. (6.35 cm)
Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis
Between side of the chassis and
devices that have fans or
blowers
0.4 in. (1 cm)
Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis
Requirement for Clearance
NOTE: The air vents are provided on the sides of the chassis for the SRX100
Services Gateway.
Related
Documentation
28
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
SRX100 Services Gateway Cabinet Requirements on page 25
•
SRX100 Services Gateway Rack Requirements on page 26
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 5
Power Requirements and Specifications
•
SRX100 Services Gateway Site Electrical Wiring Guidelines on page 29
•
SRX100 Services Gateway Electrical and Power Requirements on page 30
•
SRX100 Services Gateway Power Specifications and Requirements on page 31
SRX100 Services Gateway Site Electrical Wiring Guidelines
Table 15 on page 29 describes the factors you must consider while planning the electrical
wiring for the services gateway at your site.
CAUTION: It is particularly important to provide a properly grounded and
shielded environment and to use electrical surge-suppression devices.
CAUTION: For devices with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
Table 15: Site Electrical Wiring Guidelines for the Services Gateway
Site Wiring Factor
Guideline
Signaling Limitations
To ensure that signaling functions optimally:
•
Install wires correctly.
Improperly installed wires can emit radio interference.
•
Do not exceed the recommended distances or pass wires
between buildings.
The potential for damage from lightning strikes increases if wires
exceed recommended distances or if wires pass between
buildings.
•
Shield all conductors.
The electromagnetic pulse (EMP) caused by lightning can
damage unshielded conductors and destroy electronic devices.
Copyright © 2016, Juniper Networks, Inc.
29
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 15: Site Electrical Wiring Guidelines for the Services
Gateway (continued)
Site Wiring Factor
Guideline
Radio Frequency
Interference (RFI)
To reduce or eliminate the emission of RFI from your site wiring:
Electromagnetic
Compatibility (EMC)
•
Use twisted-pair cable with a good distribution of grounding
conductors.
•
Use a high-quality twisted-pair cable with one ground conductor
for each data signal when applicable, if you must exceed the
recommended distances.
Provide a properly grounded and shielded environment and use
electrical surge-suppression devices.
Strong sources of electromagnetic interference (EMI) can cause
the following damage:
•
Destroy the signal drivers and receivers in the device
•
Conduct power surges over the lines into the equipment, resulting
in an electrical hazard
NOTE: If your site is susceptible to problems with EMC, particularly
from lightning or radio transmitters, you may want to seek expert
advice.
CAUTION: To comply with intrabuilding lightning/surge requirements, the
intrabuilding wiring must be shielded. The shielding for the wiring must be
grounded at both ends.
Related
Documentation
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
SRX100 Services Gateway Electrical and Power Requirements on page 30
•
SRX100 Services Gateway Power Specifications and Requirements on page 31
SRX100 Services Gateway Electrical and Power Requirements
This topic provides information on the factors you must consider while planning the
electrical wiring and power availability at your site. These requirements cover the following
areas:
30
•
Power specifications and requirements for the device
•
Electrical wiring guidelines for the device installation site
•
Power, connection, and power cord specifications for the device
•
Grounding guidelines and specifications for the device
Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Power Requirements and Specifications
Related
Documentation
•
SRX100 Services Gateway Site Electrical Wiring Guidelines on page 29
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
Installation Overview for the SRX100 Services Gateway on page 40
•
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
SRX100 Services Gateway Power Specifications and Requirements
The AC power system electrical specifications for the SRX100 Services Gateway are
listed in Table 16 on page 31.
Table 16: Power System Electrical Specifications for the SRX100 Services
Gateway
Power Requirement
Specification
AC input voltage
100 to 240 VAC
AC input line frequency
50 to 60 Hz
AC system current rating
1 A maximum
WARNING: The AC power cord for the services gateway is intended for use
with the device only and not for any other use.
Related
Documentation
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
SRX100 Services Gateway Site Electrical Wiring Guidelines on page 29
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Maintaining the SRX100 Services Gateway Hardware Components on page 95
Copyright © 2016, Juniper Networks, Inc.
31
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
32
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 6
Cable Specifications and Pinouts
•
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port on page 33
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page 34
Interface Cable and Wire Specifications for the SRX100 Services Gateway
Table 17 on page 33 lists the specifications for the cables that connect to ports.
Table 17: Cable and Wire Specifications for Ports
Related
Documentation
Maximum
Length
Device
Receptacle
One 6-ft (1.83-m) length
with DB-9/RJ-45
connectors
6 ft (1.83 m)
RJ-45
One 15-ft (4.57-m)
length with RJ-45/RJ-45
connectors
328 ft
(100 m)
RJ-45
Port
Cable Specification
Cable/Wire Required
Console
port
RS-232 (EIA-232) serial
cable
Ethernet
port
CAT-5e (Category 5)
cable or equivalent
suitable for 100BASE-T
operation
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port on page 33
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page 34
RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port
Figure 6 on page 33 shows the RJ-45 cable connector pinouts for Ethernet ports.
Figure 6: Ethernet Cable Connector (RJ-45)
Table 18 on page 34 describes the RJ-45 connector pinouts for the Ethernet port.
Copyright © 2016, Juniper Networks, Inc.
33
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 18: RJ-45 Connector Pinouts for the Services Gateway Ethernet
Port
Related
Documentation
Pin
Signal
1
TX+
2
TX -
3
RX+
4
Termination network
5
Termination network
6
RX-
7
Termination network
8
Termination network
•
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port on page 34
RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port
Figure 7 on page 34 shows the RJ-45 connector pinouts for the console port.
Figure 7: Console Cable Connector
Table 19 on page 34 describes the RJ-45 connector pinouts for the console port.
Table 19: RJ-45 Connector Pinouts for the Services Gateway Console
Port
34
Pin
Signal
Description
1
RTS
Request to Send
2
DTR
Data Terminal Ready
3
TXD
Transmit Data
4
Ground
Signal Ground
Copyright © 2016, Juniper Networks, Inc.
Chapter 6: Cable Specifications and Pinouts
Table 19: RJ-45 Connector Pinouts for the Services Gateway Console
Port (continued)
Related
Documentation
Pin
Signal
Description
5
Ground
Signal Ground
6
RXD
Receive Data
7
DSR/DCD
Data Set Ready
8
CTS
Clear to Send
•
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
•
RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port on page 33
Copyright © 2016, Juniper Networks, Inc.
35
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
36
Copyright © 2016, Juniper Networks, Inc.
PART 3
Initial Installation and Configuration
•
Installation Overview on page 39
•
Unpacking the Services Gateway on page 43
•
Installing the Mounting Hardware on page 47
•
Installing the Services Gateway on page 51
•
Grounding the SRX100 Services Gateway on page 57
•
Connecting the SRX100 Services Gateway to External Devices on page 61
•
Providing Power to the SRX100 Services Gateway on page 65
•
Performing Initial Configuration on page 69
Copyright © 2016, Juniper Networks, Inc.
37
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
38
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 7
Installation Overview
•
Installation Overview for the SRX100 Services Gateway on page 40
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services
Gateway on page 41
•
SRX100 Services Gateway Autoinstallation Overview on page 42
Copyright © 2016, Juniper Networks, Inc.
39
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Installation Overview for the SRX100 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process in the order
shown in Table 20 on page 40.
Table 20: Installation Process Order for the SRX100 Services Gateway
Steps
Process
For More Information, See
1
Review the safety guidelines.
“SRX100 Services Gateway Safety
Requirements, Warnings, and
Guidelines” on page 123
2
Verify that you have prepared your
site for the installation of the services
gateway using the checklist.
“Site Preparation Checklist for the
SRX100 Services Gateway” on
page 21
3
Follow the instructions for unpacking
the services gateway and verify that
the parts are received.
“Unpacking the SRX100 Services
Gateway” on page 43
4
Prepare the services gateway for
installation.
“Preparing the SRX100 Services
Gateway for Rack-Mount Installation”
on page 47
“Preparing the SRX100 Services
Gateway for Desk-Mount Installation”
on page 48
“Preparing the SRX100 Services
Gateway for Wall-Mount Installation”
on page 48
5
Install the services gateway.
“Installing the SRX100 Services
Gateway in a Rack” on page 51
“Installing the SRX100 Services
Gateway on a Desk” on page 52
“Installing the SRX100 Services
Gateway on a Wall” on page 54
Related
40
•
6
Connect cables to external devices.
“Connecting and Organizing Interface
Cables to the SRX100 Services
Gateway” on page 61
7
Connect the grounding cable.
“Grounding the SRX100 Services
Gateway” on page 57
8
Power on the services gateway.
“Powering On and Powering Off the
SRX100 Services Gateway” on
page 66
Unpacking the SRX100 Services Gateway on page 43
Copyright © 2016, Juniper Networks, Inc.
Chapter 7: Installation Overview
Documentation
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
•
Installing the SRX100 Services Gateway in a Rack on page 51
•
Installing the SRX100 Services Gateway on a Desk on page 52
•
Installing the SRX100 Services Gateway on a Wall on page 54
•
Connecting and Organizing Interface Cables to the SRX100 Services Gateway on
page 61
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
Table 21 on page 41 lists the tools and parts required to install and maintain the SRX100
Services Gateway.
Table 21: Required Tools and Parts for Installing and Maintaining the
SRX100 Services Gateway
Task
Tools and Parts
Related Topic
Installing the SRX100 Services
Gateway
•
Phillips (+) screwdriver,
numbers 1 and 3
•
Tie wrap
“Installing the SRX100
Services Gateway in a Rack”
on page 51
“Installing the SRX100
Services Gateway on a Desk”
on page 52
“Installing the SRX100
Services Gateway on a Wall”
on page 54
Related
Documentation
Connecting the SRX100
Services Gateway
Electrostatic discharge (ESD)
grounding wrist strap
“Connecting the SRX100
Services Gateway to the
Power Supply” on page 65
Grounding the SRX100
Services Gateway
Phillips (+) screwdriver,
number 1
“Grounding the SRX100
Services Gateway” on page 57
Packing the SRX100 Services
Gateway
•
Electrostatic bag or
antistatic mat, for each
component
“Packing the SRX100 Services
Gateway and Components for
Shipment” on page 112
•
Electrostatic discharge
(ESD) grounding wrist strap
•
Unpacking the SRX100 Services Gateway on page 43
•
Installing the SRX100 Services Gateway in a Rack on page 51
Copyright © 2016, Juniper Networks, Inc.
41
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Installing the SRX100 Services Gateway on a Desk on page 52
•
Installing the SRX100 Services Gateway on a Wall on page 54
•
Grounding the SRX100 Services Gateway on page 57
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Packing the SRX100 Services Gateway and Components for Shipment on page 112
SRX100 Services Gateway Autoinstallation Overview
The autoinstallation process begins any time a services gateway is powered on and
cannot locate a valid configuration file in the internal flash. Typically, a configuration file
is unavailable when a services gateway is powered on for the first time or if the
configuration file is deleted from the internal flash. The autoinstallation feature enables
you to deploy multiple services gateways from a central location in the network.
If you are setting up many devices, autoinstallation can help automate the configuration
process by loading configuration files onto new or existing devices automatically over
the network. You can use either the J-Web interface or the CLI to configure a device for
autoinstallation.
For the autoinstallation process to work, you must store one or more host-specific or
default configuration files on a configuration server in the network and have a service
available—typically Dynamic Host Configuration Protocol (DHCP)—to assign an IP address
to the services gateway.
Autoinstallation takes place automatically when you connect an Ethernet port on a new
services gateway to the network and power on the device. To simplify the process, you
can explicitly enable autoinstallation on a device and specify a configuration server, an
autoinstallation interface, and a protocol for IP address acquisition.
For more information about configuring autoinstallation, see the following topics:
Related
Documentation
42
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Grounding the SRX100 Services Gateway on page 57
•
Powering On and Powering Off the SRX100 Services Gateway on page 66
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 8
Unpacking the Services Gateway
•
Unpacking the SRX100 Services Gateway on page 43
•
Verifying Parts Received with the SRX100 Services Gateway on page 44
Unpacking the SRX100 Services Gateway
The SRX100 Services Gateway is shipped in a cardboard carton. The carton also contains
an accessory box and the SRX100 Services Gateway Quick Start.
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the SRX100 Services Gateway:
1.
Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the SRX100
Services Gateway” on page 44.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Verifying Parts Received with the SRX100 Services Gateway on page 44
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
•
Installation Overview for the SRX100 Services Gateway on page 40
Copyright © 2016, Juniper Networks, Inc.
43
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Verifying Parts Received with the SRX100 Services Gateway
The SRX100 Services Gateway shipment package contains a packing list. Check the parts
in the shipment against the items on the packing list. The packing list specifies the part
numbers and descriptions of each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX100 Services Gateway contains the chassis with installed
components, listed in Table 22 on page 44, and an accessory box, which contains the
parts listed in Table 23 on page 44.
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.
Table 22: Parts List for a Fully Configured SRX100 Services Gateway
Component
Quantity
Chassis, with 8xFE ports
1
Power supply adapter (30 W)
1
2-prong power cord
1
DB-9 to RJ-45 adapter, straight through, 7 ft
1
Table 23: Accessory Parts List for the SRX100 Services Gateway
Part
Quantity
Juniper Networks Product Warranty
1
End User License Agreement
1
Quick Start
1
Security Products Safety Guide
1
Juniper Compliance Form Letter
1
Product Registration
1
NOTE: The mounting kits available for rack, desk, and wall installation of the
SRX100 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
44
Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Unpacking the Services Gateway
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Unpacking the SRX100 Services Gateway on page 43
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
Copyright © 2016, Juniper Networks, Inc.
45
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
46
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 9
Installing the Mounting Hardware
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
Preparing the SRX100 Services Gateway for Rack-Mount Installation
You can mount an SRX100 Services Gateway in four-post (telco) racks, enclosed cabinets,
and open-frame racks.
NOTE: The SRX100 Services Gateway cannot be center-mounted in racks.
Before mounting the SRX100 Services Gateway in a rack:
•
Verify that the installation site meets the requirements described in the site preparation
checklist.
•
Verify that the racks or cabinets meet the specific requirements described in “SRX100
Services Gateway Rack Requirements” on page 26.
•
Place the rack or cabinet in its permanent location, allowing adequate clearance for
airflow and maintenance, and secure it to the building structure. For more information,
see “Clearance Requirements for Airflow and Hardware Maintenance of the SRX100
Services Gateway” on page 27.
•
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the SRX100 Services Gateway” on page 43.
•
Verify that you have the following parts available in your rack-mounting kit for the
SRX100 Services Gateway:
•
Rack-mount tray
•
Screws
NOTE: The rack-mounting kit is not shipped with the device and must be
ordered separately.
Copyright © 2016, Juniper Networks, Inc.
47
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Related
Documentation
•
Unpacking the SRX100 Services Gateway on page 43
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
SRX100 Services Gateway Rack Requirements on page 26
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
Preparing the SRX100 Services Gateway for Desk-Mount Installation
You can mount an SRX100 Services Gateway on a desk or other level surface horizontally
or vertically. The four rubber feet attached to the chassis provide stability.
Before mounting an SRX100 Services Gateway on a desk or other level surface:
•
Verify that the site meets the requirements described in the site preparation checklist.
•
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
•
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the SRX100 Services Gateway” on page 43.
•
If you are mounting the device vertically on the desk, make sure that the following parts
are available in your vertical desk-mounting kit for the SRX100 Services Gateway:
•
Vertical stand
•
Screws
NOTE: The vertical desk-mounting kit is not shipped with the device and
must be ordered separately.
Related
Documentation
•
Unpacking the SRX100 Services Gateway on page 43
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
Preparing the SRX100 Services Gateway for Wall-Mount Installation
You can mount an SRX100 Services Gateway on a wall. The four rubber feet attached
to the chassis provide stability.
48
Copyright © 2016, Juniper Networks, Inc.
Chapter 9: Installing the Mounting Hardware
Before mounting an SRX100 Services Gateway on a wall:
•
Verify that the site meets the requirements described in “Site Preparation Checklist
for the SRX100 Services Gateway” on page 21.
•
Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the SRX100 Services Gateway” on page 43.
•
Verify that you have the following parts available in your wall-mounting kit for the
SRX100 Services Gateway:
•
Wall-mounting brackets
•
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
•
Site Preparation Checklist for the SRX100 Services Gateway on page 21
•
Unpacking the SRX100 Services Gateway on page 43
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
Copyright © 2016, Juniper Networks, Inc.
49
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
50
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 10
Installing the Services Gateway
•
Installing the SRX100 Services Gateway in a Rack on page 51
•
Installing the SRX100 Services Gateway on a Desk on page 52
•
Installing the SRX100 Services Gateway on a Wall on page 54
Installing the SRX100 Services Gateway in a Rack
You can front-mount two SRX100 Services Gateways in a rack. Many types of racks are
acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks.
For more information about the type of rack or cabinet the SRX100 Services Gateway
can be installed into, see “SRX100 Services Gateway Rack Requirements” on page 26.
NOTE: If you are installing multiple devices in one rack, install the lowest one
first and proceed upward in the rack.
To install the device in a rack:
1.
Position the two devices in the rack-mount tray as shown in Figure 8 on page 51.
g031038
Figure 8: Installing the SRX100 Services Gateway in a Rack
2. Use a number-1 Phillips screwdriver to install the screws that secure the device to the
rack-mount tray.
3. Have one person grasp the sides of the rack-mount tray, lift it, and position it in the
rack.
4. Align the bottom hole in each side of the rack-mount tray with a hole in each rack rail
as shown in Figure 9 on page 52, making sure the rack-mount tray is level.
Copyright © 2016, Juniper Networks, Inc.
51
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
g0310 39
Figure 9: Hanging the SRX100 Services Gateway in a Rack
5. Have a second person install a mounting screw into each of the two aligned holes.
Use a number-3 Phillips screwdriver to install the mounting screws.
6. Install the second screw in each side of the rack-mount tray.
7. Verify that the mounting screws on one side of the rack-mount tray are aligned with
the mounting screws on the opposite side and that the tray is level.
NOTE: The rack-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
SRX100 Services Gateway Rack Requirements on page 26
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services
Gateway on page 27
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
•
Installing the SRX100 Services Gateway on a Desk on page 52
•
Installing the SRX100 Services Gateway on a Wall on page 54
Installing the SRX100 Services Gateway on a Desk
You can install the SRX100 Services Gateway on a desk, table, or other level surface. The
device is shipped with the rubber feet attached. The rubber feet are necessary to stabilize
the device on the desk.
You can install the device in a horizontal or vertical position.
52
Copyright © 2016, Juniper Networks, Inc.
Chapter 10: Installing the Services Gateway
NOTE: The desk-mounting kit is not shipped with the device and must be
ordered separately.
Horizontal Desk Mounting
The horizontal position is the standard installation position and does not require the
vertical installation kit.
To install the device in a horizontal position:
1.
Make sure that the rubber feet are attached to the chassis.
2. Place the device on a desk with the Juniper Networks logo embossed on the top cover
facing up.
Vertical Desk Mounting
The vertical position requires the vertical installation kit, which consists of a vertical
installation stand.
To install the device in a vertical position:
1.
Place the device on a flat and level surface with the Juniper Networks logo on the
front panel facing up, as shown in Figure 10 on page 53.
Figure 10: Installing the SRX100 Services Gateway on a Desk
2. Attach the vertical stand to the right side of the chassis as shown in
Figure 10 on page 53.
3. Place the chassis vertically on the desk with the stand resting on the desk.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
Copyright © 2016, Juniper Networks, Inc.
53
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Installing the SRX100 Services Gateway in a Rack on page 51
•
Installing the SRX100 Services Gateway on a Wall on page 54
Installing the SRX100 Services Gateway on a Wall
You can install the SRX100 Services Gateway on a wall. The device is shipped with the
rubber feet attached. The rubber feet help stabilize the device on the wall and enhance
airflow.
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
To install the device on a wall:
1.
Place the device on a flat and level surface with the Juniper Networks logo embossed
on the top cover facing up.
2. Position a mounting bracket on each side of the chassis as shown in
Figure 11 on page 54.
Figure 11: Installing the SRX100 Services Gateway on a Wall
3. Use a number–1 Phillips screwdriver to install the screws that secure the mounting
brackets to the chassis.
4. If you are using wall anchors to support the chassis, install two pairs of anchors on
the wall with mounting brackets attached.
5. Have one person grasp the sides of the device, lift it, and position it on the wall.
6. Have a second person install two pairs of mounting screws through the bracket holes
on either side of the device to secure it to the wall.
7. Verify that the mounting screws on one side are aligned with the mounting screws on
the opposite side and that the device is level (see Figure 12 on page 55).
54
Copyright © 2016, Juniper Networks, Inc.
Chapter 10: Installing the Services Gateway
Figure 12: Hanging the SRX100 Services Gateway on a Wall
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
•
Installing the SRX100 Services Gateway on a Desk on page 52
•
Installing the SRX100 Services Gateway in a Rack on page 51
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
Copyright © 2016, Juniper Networks, Inc.
55
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
56
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 11
Grounding the SRX100 Services Gateway
•
Grounding the SRX100 Services Gateway on page 57
Grounding the SRX100 Services Gateway
To meet safety and electromagnetic interference (EMI) requirements and to ensure
proper operation, the SRX100 Services Gateway must be adequately grounded before
power is connected.
Figure 13 on page 57 illustrates how a grounding cable connects to the services gateway.
Figure 13: Grounding the SRX100 Services Gateway
You ground the device by connecting a grounding cable to earth ground and then attaching
it to the chassis grounding points using one M3 screw.
CAUTION: Before device installation begins, a licensed electrician must
attach a cable lug to the grounding and power cables that you use. A cable
with an incorrectly attached lug can damage the device (for example, by
causing a short circuit).
Table 24 on page 58 lists the grounding components of the SRX100 Services Gateway.
Copyright © 2016, Juniper Networks, Inc.
57
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 24: SRX100 Services Gateway Grounding Components
Number
Component
1
Grounding point on the chassis
2
Grounding lug
3
Grounding screw (M3 screw)
Table 25 on page 58 lists the specifications of the grounding cable used with the device.
Table 25: Grounding Cable Specifications for the Services Gateway
Grounding Requirement
Specification
Grounding cable
14 AWG single-strand wire cable
Amperage of grounding cable
Up to 4 A
Grounding lug
Ring-type, vinyl-insulated TV14-6R lug or
equivalent
To ground the device:
1.
Connect the grounding cable to a proper earth ground.
2. Verify that a licensed electrician has attached the cable lug to the grounding cable.
3. Place the grounding cable lug over the grounding point on the middle rear of the
chassis.
4. Secure the grounding cable lug to the grounding point with the screw as shown in
Figure 13 on page 57.
5. Dress the grounding cable and verify that it does not touch or block access to the
services gateway components and that it does not drape where people could trip on
it.
NOTE: The device should be permanently connected to ground during
operation.
Related
Documentation
58
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Connecting and Organizing Interface Cables to the SRX100 Services Gateway on
page 61
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
•
Powering On and Powering Off the SRX100 Services Gateway on page 66
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
Copyright © 2016, Juniper Networks, Inc.
Chapter 11: Grounding the SRX100 Services Gateway
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
Copyright © 2016, Juniper Networks, Inc.
59
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
60
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 12
Connecting the SRX100 Services Gateway
to External Devices
•
Connecting and Organizing Interface Cables to the SRX100 Services
Gateway on page 61
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
•
Connecting the Modem to the Console Port on the SRX100 Services Gateway on page 63
•
Connecting to the CLI at the User End for the SRX100 Services Gateway on page 63
Connecting and Organizing Interface Cables to the SRX100 Services Gateway
You can connect the interfaces installed in the services gateway to various network
media. Each type of interface on the services gateway uses a particular medium to
transmit data. You must configure each network interface before it can operate on the
device.
To connect and organize an interface cable for the device:
1.
Have ready a length of the type of cable used by the interface.
2. Insert the cable connector into the cable connector port on the interface faceplate.
3. Arrange network cables as follows to prevent them from dislodging or developing
stress points:
Related
Documentation
•
Secure cables so that they are not supporting their own weight as they hang to the
floor.
•
Place excess cable out of the way in neatly coiled loops.
•
Use fasteners to maintain the shape of cable loops.
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Grounding the SRX100 Services Gateway on page 57
•
Interface Cable and Wire Specifications for the SRX100 Services Gateway on page 33
•
SRX100 Services Gateway Installation Safety Guidelines and Warnings on page 127
Copyright © 2016, Juniper Networks, Inc.
61
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Connecting the Modem at the SRX100 Services Gateway End
NOTE: These instructions use Hayes-compatible modem commands to
configure the modem. If your modem is not Hayes-compatible, refer to the
documentation for your modem and enter the equivalent modem commands.
To configure the modem on the services gateway end:
1.
Connect the modem to a PC or laptop computer.
2. Power on the modem.
3. From the PC or laptop computer, start your asynchronous terminal emulation
application (such as Microsoft Windows HyperTerminal), and select the COM port to
which the modem is connected (for example, COM1).
4. Configure the port settings as shown in Table 26 on page 62.
Table 26: Port Settings for Configuring the Modem on the Services
Gateway End
Port Setting
Value
Bits per second
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None
5. In the HyperTerminal window, enter AT.
For more information on the AT commands, see the following topics:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
An OK response verifies that the modem can communicate successfully with the COM
port on the PC or laptop.
6. Configure the modem to answer a call on the first ring by entering ATS0=1.
7. Configure the modem to accept modem control DTR signals by entering AT&D1.
8. Disable flow control by entering AT&K0.
9. Save modem settings by entering AT&W.
62
Copyright © 2016, Juniper Networks, Inc.
Chapter 12: Connecting the SRX100 Services Gateway to External Devices
Related
Documentation
•
Connecting the Modem to the Console Port on the SRX100 Services Gateway on
page 63
•
Connecting to the CLI at the User End for the SRX100 Services Gateway on page 63
Connecting the Modem to the Console Port on the SRX100 Services Gateway
To connect the dial-up modem to the console port on the services gateway:
1.
Turn off power to the services gateway.
2. Turn off power to the modem.
3. Plug one end of the Ethernet cable supplied with your services gateway into the
console port on the services gateway.
4. Plug the other end of the CAT-5e cable (Ethernet cable) into the RJ-45 to DB-9 serial
port adapter supplied with your services gateway.
5. Connect the serial port adapter to a separately purchased DB-9 female to DB-25
male adapter or other adapter appropriate for your modem.
6. Plug the modem adapter into the DB-25 connector on the modem.
7. Connect the modem to your telephone network.
8. Turn on the power to the modem.
9. Power on the services gateway by pressing the Power button on the front panel. Verify
that the Power LED on the front panel turns green.
NOTE: Most modems have an RS-232 DB-25 connector. You must
separately purchase an adapter to connect your modem to the RJ-45 to
DB-9 adapter and the Ethernet cable supplied with the services gateway.
Related
Documentation
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
•
Connecting to the CLI at the User End for the SRX100 Services Gateway on page 63
Connecting to the CLI at the User End for the SRX100 Services Gateway
To remotely connect to the CLI through a dial-up modem connected to the console port
on the services gateway:
1.
Connect a modem at your remote location to a management device such as a PC or
laptop computer.
2. Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) on the PC or laptop computer.
3. Select the COM port to which the modem is connected (for example, COM1).
Copyright © 2016, Juniper Networks, Inc.
63
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
4. Configure the port settings shown in Table 27 on page 64.
Table 27: Port Settings for Connecting to the CLI at User End
Port Setting
Value
Bits per second
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None
5. In the HyperTerminal window, enter AT.
For more information on the AT commands, see the following topics:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
An OK response verifies that the modem can communicate successfully with the COM
port on the PC or laptop.
6. Dial the modem that is connected to the console port on the services gateway by
entering ATDT remote-modem-number. For example, if the number of the modem
connected to the console port on the services gateway is 0013033033030, enter ATDT
0013033033030.
The services gateway login prompt appears.
7. Log in as the user root. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
64
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
•
Connecting the Modem to the Console Port on the SRX100 Services Gateway on
page 63
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 13
Providing Power to the SRX100 Services
Gateway
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Powering On and Powering Off the SRX100 Services Gateway on page 66
Connecting the SRX100 Services Gateway to the Power Supply
To connect the device to the power supply:
CAUTION: Before connecting the device to the power supply, attach an ESD
strap to an ESD point and place the other end of the strap around your bare
wrist.
1.
Plug the DC connector end of the power cable into the power connector on the back
of the device (see Figure 14 on page 65).
2. Plug the AC adapter end of the power cable into an AC power outlet.
Figure 14: Connecting the Services Gateway to the Power Supply
NOTE: The device must be connected to earth ground during normal
operation. The protective earthing terminal on the rear of the chassis is
provided to connect the device to ground.
Copyright © 2016, Juniper Networks, Inc.
65
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
CAUTION: We recommend using a surge protector for the power connection.
NOTE: Use the cable tie holder to secure the power cord on to the power
supply point.
NOTE: We strongly recommend that you use only the 3-prong power cord
supplied with your services gateway. If you are using a 2-prong power cord,
then ensure that your device is adequately grounded using the grounding
point available on the back panel of the chassis.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Grounding the SRX100 Services Gateway on page 57
•
Connecting and Organizing Interface Cables to the SRX100 Services Gateway on
page 61
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
Powering On and Powering Off the SRX100 Services Gateway
This topic describes the following procedures:
•
Powering On the SRX100 Services Gateway on page 66
•
Powering Off the SRX100 Services Gateway on page 67
Powering On the SRX100 Services Gateway
To power on the services gateway:
1.
Ensure that you have connected the power supply to the device.
2. Insert the plug of the power supply adapter into an AC power source receptacle.
3. Turn on the power to the AC power receptacle.
The device starts automatically as the power supply completes its startup sequence.
The Power LED lights during startup and remains on when the device is operating normally.
NOTE: After the power supply is turned on, it can take up to 60 seconds for
status indicators—such as the Status and Power LEDs—to show that the
power supply is functioning normally. Ignore error indicators that appear
during the first 60 seconds.
66
Copyright © 2016, Juniper Networks, Inc.
Chapter 13: Providing Power to the SRX100 Services Gateway
NOTE: If the system is completely powered off when you turn on the power
supply, the device starts as the power supply completes its startup sequence.
If the device finishes starting and you need to power off the system again,
first issue the CLI request system power-off command.
Powering Off the SRX100 Services Gateway
You can power off the services gateway in one of the following ways:
•
Graceful shutdown—Press and immediately release the Power button. The device
begins gracefully shutting down the operating system and then powers itself off.
WARNING: Use the graceful shutdown method to power off or reboot the
services gateway.
•
Forced shutdown—Press the Power button and hold it for ten seconds. The device
immediately powers itself off without shutting down the operating system.
WARNING: Use the forced shutdown method as a last resort to recover
the services gateway if the services gateway operating system is not
responding to the graceful shutdown method.
For more information on power button, see “SRX100 Services Gateway LEDs” on page 7.
WARNING: Do not press the Power button while the device is shutting down.
CAUTION: Forced shutdown can result in data loss and corruption of the file
system.
NOTE: To remove power completely from the device, unplug the power cord
or switch off the AC power source.
After powering off a power supply, wait at least 10 seconds before turning it
back on. After powering on a power supply, wait at least 10 seconds before
turning it off.
The power button on the services gateway is a standby power switch, which
will not turn off the input power to the services gateway.
Copyright © 2016, Juniper Networks, Inc.
67
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
TIP: When you are powering off the device, the CLI displays the following
message: Turning the system power off. You can now safely remove the power
cable to completely power off the device.
NOTE: You can use the request system reboot CLI command to schedule a
reboot to the services gateway using request system reboot.
For more information about halting, powering off, or rebooting the services gateway using
the CLI, see the following topics:
Related
Documentation
68
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
•
Connecting the SRX100 Services Gateway to the Power Supply on page 65
•
Grounding the SRX100 Services Gateway on page 57
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 14
Performing Initial Configuration
•
SRX100 Services Gateway Software Configuration Overview on page 69
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
SRX100 Services Gateway Secure Web Access Overview on page 74
•
Connecting an SRX100 Services Gateway to the CLI Locally on page 75
•
Connecting an SRX100 Services Gateway to the CLI Remotely on page 76
•
Viewing Factory-Default Settings of the SRX100 Services Gateway on page 77
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI on page 83
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
J-Web Interface on page 86
•
Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version on page 90
SRX100 Services Gateway Software Configuration Overview
This topic includes the following sections:
•
Preparing the SRX100 Services Gateway for Configuration on page 69
•
Understanding the Factory Default Configuration on page 70
•
Understanding Built-In Ethernet Ports and Initial Configuration on page 70
•
Mapping the Chassis Cluster Ports on page 71
•
Understanding Management Access on page 72
Preparing the SRX100 Services Gateway for Configuration
The Juniper Networks Junos operating system (Junos OS) is preinstalled on the SRX100
Services Gateway. When the services gateway is powered on, it is ready to be configured.
You can perform the initial software configuration of the services gateway by using either
the browser-based setup wizard or the command-line interface (CLI).
Before configuring the device, gather the configuration information required to deploy
the device in your network. At minimum, the setup wizard requires the following
information:
Copyright © 2016, Juniper Networks, Inc.
69
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Device name to be used on the network
•
Password for the root user
•
Time information for the services gateway location:
•
Local time zone
•
Name or IP address of a Network Time Protocol (NTP) server, if NTP is used to set
the time on the services gateway
•
Local date and time if an NTP server is not used to set the time
Understanding the Factory Default Configuration
Your services gateway comes configured with a default factory configuration. This
configuration sets up the following network topology:
•
Interface fe-0/0/0 (port 0/0) is configured for Internet access. A DHCP client running
on the interface enables the interface to receive its network settings—IP address,
default gateway, and DNS servers—from an Internet service provider (ISP).
•
Interfaces fe-0/0/1 through fe-0/0/7 (port 0/1 through port 0/7) are configured as
switched interfaces in a common VLAN on which the IP address 192.168.1.1/24 is
configured.
•
A DHCP server is active on interfaces fe-0/0/1 through fe-0/0/7. The DHCP server
assigns IP addresses in the 192.168.1.0/24 network to connected devices.
The default configuration also includes the following security configuration:
•
Two security zones are created: trust and untrust.
•
Interface fe-0/0/0 is in the untrust zone, while interfaces fe-0/01 through fe-0/0/7 are
in the trust zone.
•
A security policy is created that permits outbound traffic from the trust zone to the
untrust zone. Inbound traffic originating in the untrust zone is blocked.
•
Source Network Address Translation (NAT) is configured on the trust zone.
Understanding Built-In Ethernet Ports and Initial Configuration
During the initial configuration of the services gateway, how you use the built-in Ethernet
ports (ports 0/0 through 0/7) depends on the initial configuration you are performing:
•
Configuration using autoinstallation—Use built-in Ethernet port 0/0 to connect to the
DHCP server. A DHCP client is configured on this interface, allowing the services gateway
to receive its IP address from the DHCP server.
•
Configuration using the setup wizard—Use the following built-in Ethernet ports:
•
70
Port 0/1—Connect your management device to this port. A DHCP server running on
this interface automatically assigns your management device an IP address in the
same subnetwork as the interface, allowing your management device to
communicate with the services gateway through this interface.
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
•
Port 0/0—Connect your services gateway to the Internet on this port if you plan to
download purchased software licenses through the setup wizard. A DHCP client
running on this interface allows it to receive its network settings from the ISP.
NOTE: Downloading of purchased licenses from the setup wizard is
available only in Junos OS Release 11.2R3 or later.
•
Configuration of a chassis cluster—Perform the initial configuration of the chassis
cluster using a console connection. Before you perform the initial configuration, connect
the built-in Ethernet ports as follows:
•
Port 0/6—Connect to the out-of-band management network for management of
the device. When you enable chassis clustering as part of configuring the chassis
cluster, the management interface (fxp0) is automatically created on this port.
•
Port 0/7—Connect to the other device in the chassis cluster. When you enable chassis
clustering, the control interface between the two devices (fxp1) is automatically
created on this port.
You must also make another connection between the two devices for the fabric link.
You can use any available Fast Ethernet port for this connection. You must configure
the interface you choose as the fabric link. For more information on configuring chassis
clusters, see the Security Basics.
Mapping the Chassis Cluster Ports
On the SRX100 Services Gateway, the fxp1 port is not user configurable when the services
gateway is operating in chassis cluster mode.
The fxp0 port is dedicated as the out-of-band management interface for each of the
devices in the chassis cluster setup and the fxp1 port is dedicated as the chassis-cluster
control port.
Table 28 on page 71 shows the mapping of the chassis cluster ports.
Table 28: Mapping the Chassis Cluster Ports on an SRX100 Services
Gateway
FE Ports on SRX100 Services Gateway
Management Interface
fe-0/0/6
fxp0 (management port)
fe-0/0/7
fxp1 (control port)
The Junos OS automatically creates the fxp0 and fxp1 interfaces on these ports when
the SRX100 Services Gateway is operating in chassis cluster mode.
For more information, see the following guides:
•
Interfaces for Security Devices
Copyright © 2016, Juniper Networks, Inc.
71
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Security Basics
Understanding Management Access
Telnet allows you to connect to the services gateway and access the CLI to execute
commands from a remote system. The Telnet CLI connections are not encrypted and
therefore can be intercepted.
NOTE: Telnet access to the root user is prohibited. You must use more secure
methods, such as SSH, to log in as root.
SSH provides the following features:
•
Allows you to connect to the device and access the CLI to execute commands from a
remote system
•
Encrypts traffic so that it cannot be intercepted (unlike Telnet)
•
Can be configured so that connections are authenticated by a digital certificate
•
Uses public–private key technology for both connection and authentication
The SSH client software must be installed on the machine where the client application
runs. If the SSH private key is encrypted (for greater security), the SSH client must be
able to access the passphrase used to decrypt the key.
For information about obtaining SSH software, see http://www.ssh.com and
http://www.openssh.com.
If you are using a Junos XML management protocol server to configure and monitor
devices, you can activate cleartext access on the device to allow unencrypted text to be
sent directly over a Transmission Line Protocol (TCP) connection without using any
additional protocol (such as SSH, SSL, or Telnet). For more information about the Junos
XML management protocol application programming interface (API), see the NETCONF
XML Management Protocol Guide.
NOTE: Information sent in cleartext is not encrypted and therefore can be
intercepted.
If the device is operating in a Common Criteria environment, see the Configuration Guides
for Junos OS Public Sector Certifications.
Related
Documentation
72
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
Connecting the SRX100 Services Gateway to the CLI
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI on page 83
•
SRX100 Services Gateway Secure Web Access Overview on page 74
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
Connecting to the SRX100 Services Gateway Setup Wizard
If you plan to use the setup wizard to perform the initial configuration of the services
gateway, you must connect your management device (such as a laptop or desktop
computer) to one of the built-in Ethernet ports 0/1 through 0/7 on the services gateway
as shown in Figure 15 on page 73. Do not use built-in Ethernet port 0/0.
g031007
Figure 15: Connecting to the Ethernet Port on an SRX100 Services Gateway
To enable communication between the management device and the services gateway,
ports 0/1 through 0/7 are preconfigured with the IP address 192.168.1.1 and use DHCP to
assign an IP address in the 192.168.1.0/24 network to any connected device.
To connect a management device to the built-in Ethernet ports:
1.
Ensure that the IP address for the Ethernet port on the management device is
configured in one of the following ways:
•
The IP address is assigned by DHCP.
•
The IP address is on the 192.168.1.0/24 subnetwork (but is not 192.168.1.1).
2. Turn off the management device.
3. Plug one end of the CAT-5e (Ethernet cable) into the Ethernet port on the management
device.
4. Connect the other end of the Ethernet cable to a built-in Fast Ethernet port (any of
ports 0/1 through 0/7) on the services gateway. If the services gateway has not already
been powered on, power it on now.
5. Wait until the Status LED on the front panel of the services gateway turns solid green.
Copyright © 2016, Juniper Networks, Inc.
73
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
6. Turn on the power to the management device. The services gateway assigns an IP
address to the management device within the 192.168.1.0/24 subnetwork if the
management device is configured to use DHCP.
7. To access the setup wizard, open a Web browser on the management device and
enter the IP address 192.168.1.1 in the address field.
Related
Documentation
•
Connecting the SRX100 Services Gateway to the CLI
•
SRX100 Services Gateway Software Configuration Overview on page 69
•
SRX100 Services Gateway Secure Web Access Overview on page 74
SRX100 Services Gateway Secure Web Access Overview
You can manage a services gateway remotely through the J-Web interface. To
communicate with the services gateway, the J-Web interface uses Hypertext Transfer
Protocol (HTTP). HTTP allows easy Web access but no encryption. The data that is
transmitted between the Web browser and the services gateway by means of HTTP is
vulnerable to interception and attack. To enable secure Web access, the services gateway
supports HTTP over Secure Sockets Layer (HTTPS). You can enable HTTP or HTTPS
access on specific interfaces and ports as needed.
The services gateway uses the SSL protocol to provide secure management of services
gateways through the J-Web. SSL uses public-private key technology that requires a
paired private key and an authentication certificate for providing the SSL service. SSL
encrypts communication between your device and the Web browser with a session key
negotiated by the SSL server certificate.
An SSL certificate includes identifying information such as a public key and a signature
made by a certificate authority (CA). When you access the services gateway through
HTTPS, an SSL handshake authenticates the server and the client and begins a secure
session. If the information does not match or if the certificate has expired, your access
to the services gateway through HTTPS is restricted.
Without SSL encryption, communication between your services gateway and the browser
is sent in the open and can be intercepted. We recommend that you enable HTTPS access
on your WAN interfaces.
For more information about configuring secure Web access, see the following topics:
Related
Documentation
74
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
•
SRX100 Services Gateway Software Configuration Overview on page 69
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI on page 83
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
J-Web Interface on page 86
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
Connecting an SRX100 Services Gateway to the CLI Locally
If you plan to use the CLI to configure the SRX100 Services Gateway, you must connect
through the console port, as shown in Figure 16 on page 75.
Figure 16: Connecting to the Console Port on an SRX100 Services Gateway
NOTE: Figure 16 on page 75 shows a connection to a local management
device. A remote connection to the services gateway through a modem
requires the cable and connector shown (provided in the services gateway
accessory box), plus a DB-9 male to DB-25 male (or similar) adapter for your
modem, which you must purchase separately.
To connect to the CLI using a local management device through the console port on the
services gateway:
1.
Turn off power to the services gateway.
2. Turn off power to the management device, such as a PC or laptop computer, that you
are using to access the CLI.
3. Plug one end of the Ethernet cable supplied with your services gateway into the RJ-45
to DB-9 serial port adapter supplied with your services gateway (see
Figure 16 on page 75).
4. Plug the RJ-45 to DB-9 serial port adapter into the serial port on the management
device (see Figure 16 on page 75).
5. Connect the other end of the Ethernet cable to the console port on the services
gateway (see Figure 16 on page 75).
6. Turn on the power to the management device.
Copyright © 2016, Juniper Networks, Inc.
75
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
7. Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) and select the appropriate COM port to use (for example, COM1).
8. Configure the port settings shown in Table 29 on page 76.
Table 29: Console Port Settings for the SRX100 Services Gateway
Port Settings
Value
Bits per second
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None
9. Power on the services gateway by pressing the Power button on the front panel. Verify
that the Power LED on the front panel turns green.
The terminal emulation screen on your management device displays the startup
sequence. When the services gateway has finished starting up, a login prompt appears.
10. Log in as the user root. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
•
SRX100 Services Gateway Basic Connectivity Overview
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
Connecting an SRX100 Services Gateway to the CLI Remotely on page 76
•
Displaying Basic Connectivity Configurations for the SRX100 Services Gateway
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
Connecting an SRX100 Services Gateway to the CLI Remotely
You can connect an SRX100 Services Gateway to the CLI from a remote location through
two dial-up modems:
•
A modem that is connected to the console port on the services gateway
•
A second modem connected to a remote management device
The modem connection allows you to remotely perform the same console operations
you can perform locally.
Related
Documentation
76
•
SRX100 Services Gateway Basic Connectivity Overview
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
Connecting an SRX100 Services Gateway to the CLI Locally on page 75
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
•
Displaying Basic Connectivity Configurations for the SRX100 Services Gateway
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
Viewing Factory-Default Settings of the SRX100 Services Gateway
To view the factory-default configuration of the services gateway using the CLI:
1.
Verify that the services gateway is powered on.
2. Log in as the root user and provide your credentials.
3. In shell mode, navigate to the /etc/config folder.
% cd /etc/config
4. View the list of default config files.
% ls
The following sample output displays the list of factory-default configuration files:
j-series-defaults.conf
jsrxsme-series-defaults.conf
jsrxsme-series-factory.conf
junos-defaults.conf
junos-factory.conf
junos-fips-defaults.conf
ptx-series-defaults.conf
srx100-8xfe-factory.conf
srx100b-defaults.conf
srx100b-factory.conf
srx100h-defaults.conf
srx100h-factory.conf
srx100h2-defaults.conf
srx100h2-factory.conf
srx110-8xfe-vdsl-factory.conf
srx110-8xfe-vdsl-wl-factory.conf
srx110-8xfe-wl-factory.conf
srx110b-defaults.conf
srx110b-va-defaults.conf
srx110b-va-factory.conf
srx110b-vb-defaults.conf
srx110b-vb-factory.conf
srx110b-wl-defaults.conf
srx110b-wl-factory.conf
srx110h-defaults.conf
srx110h-va-defaults.conf
srx110h-va-factory.conf
srx110h-va-wl-defaults.conf
srx110h-va-wl-factory.conf
srx110h-vb-defaults.conf
srx110h-vb-factory.conf
srx110h-vb-wl-defaults.conf
srx110h-vb-wl-factory.conf
srx110h-wl-defaults.conf
srx110h-wl-factory.conf
srx110h2-va-defaults.conf
srx110h2-va-factory.conf
srx110h2-vb-defaults.conf
Copyright © 2016, Juniper Networks, Inc.
srx210h-defaults.conf
srx210h-factory.conf
srx210h-poe-defaults.conf
srx210h-poe-factory.conf
srx210he-defaults.conf
srx210he-factory.conf
srx210he-poe-defaults.conf
srx210he-poe-factory.conf
srx210he2-defaults.conf
srx210he2-factory.conf
srx210he2-poe-defaults.conf
srx210he2-poe-factory.conf
srx220-8xge-factory.conf
srx220-poe-8xge-factory.conf
srx220h-defaults.conf
srx220h-factory.conf
srx220h-poe-defaults.conf
srx220h-poe-factory.conf
srx220h2-defaults.conf
srx220h2-factory.conf
srx220h2-poe-defaults.conf
srx220h2-poe-factory.conf
srx240-16xge-factory.conf
srx240-poe-16xge-factory.conf
srx240b-factory.conf
srx240b2-factory.conf
srx240h-dc-defaults.conf
srx240h-dc-factory.conf
srx240h-defaults.conf
srx240h-factory.conf
srx240h-poe-defaults.conf
srx240h-poe-factory.conf
srx240h2-dc-defaults.conf
srx240h2-dc-factory.conf
srx240h2-defaults.conf
srx240h2-factory.conf
srx240h2-poe-defaults.conf
srx240h2-poe-factory.conf
77
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
srx110h2-vb-factory.conf
srx210-2xge-6xfe-factory.conf
srx210-poe-2xge-6xfe-factory.conf
srx210b-defaults.conf
srx210b-factory.conf
srx210be-defaults.conf
srx210be-factory.conf
srx550-6xge-factory.conf
srx550-defaults.conf
srx550-factory.conf
srx650-4xge-factory.conf
srx650-defaults.conf
srx650-factory.conf
5. View the required default config file.
% vi config file name
For example, enter the following command to view the default configuration file for
the SRX240 Services Gateway.
% vi srx240-poe-16xge-factory.conf
The following sample output displays the factory-default configuration on an SRX240
Services Gateway:
##
## $Id: $
##
## Copyright (c) 2009, Juniper Networks, Inc.
## All rights reserved.
##
system {
autoinstallation {
delete-upon-commit;
traceoptions {
level verbose;
flag {
all;
}
}
interfaces {
ge-0/0/0 {
bootp;
}
}
}
services {
ssh;
telnet;
dhcp {
router {
192.168.1.1;
}
pool 192.168.1.0/24 {
address-range low 192.168.1.2 high 192.168.1.254;
}
propagate-settings ge-0/0/0.0;
}
web-management {
http {
interface [ vlan.0 ];
}
https {
system-generated-certificate;
interface [ vlan.0 ];
}
}
78
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
xnm-clear-text;
}
name-server {
208.67.222.222;
208.67.220.220;
}
syslog {
archive size 100k files 3;
}
}
interfaces {
ge-0/0/0
unit
}
ge-0/0/1
unit
{
0;
{
0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/2 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/3 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/5 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
Copyright © 2016, Juniper Networks, Inc.
79
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
}
}
}
}
ge-0/0/6 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/7 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/8 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/9 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/11 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
80
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
}
}
}
ge-0/0/12 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/13 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/14 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
ge-0/0/15 {
unit 0 {
family ethernet-switching {
vlan {
members vlan-trust;
}
}
}
}
vlan {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
}
poe {
interface all;
}
security {
nat {
source {
rule-set trust-to-untrust {
Copyright © 2016, Juniper Networks, Inc.
81
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
from zone trust;
to zone untrust;
rule source-nat-rule {
match {
source-address 0.0.0.0/0;
}
then {
source-nat {
interface;
}
}
}
}
}
}
screen {
ids-option untrust-screen {
icmp {
ping-death;
}
ip {
source-route-option;
tear-drop;
}
tcp {
syn-flood {
alarm-threshold 1024;
attack-threshold 200;
source-threshold 1024;
destination-threshold 2048;
timeout 20;
}
land;
}
}
}
zones {
security-zone trust {
host-inbound-traffic {
system-services {
all;
}
protocols {
all;
}
}
interfaces {
vlan.0;
}
}
security-zone untrust {
interfaces {
ge-0/0/0.0 {
host-inbound-traffic {
system-services {
dhcp;
tftp;
}
}
}
}
82
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
screen untrust-screen;
}
}
policies {
from-zone trust to-zone untrust {
policy trust-to-untrust {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
}
vlans {
vlan-trust {
vlan-id 3;
l3-interface vlan.0;
}
}
protocols {
stp;
}
Related
Documentation
•
SRX100 Services Gateway Autoinstallation Overview on page 42
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI on page 83
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI
This procedure connects the device to the network but does not enable it to forward
traffic. For complete information about enabling the device to forward traffic, including
examples, see Security Basics.
To configure the software:
1.
Verify that the device is powered on.
2. Log in as the root user. There is no password.
3. Start the CLI.
root# cli
root@>
4. Enter configuration mode.
configure
[edit]
root@#
Copyright © 2016, Juniper Networks, Inc.
83
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
5. Set the root authentication password by entering a cleartext password, an encrypted
password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
6. Configure an administrator account on the device.
[edit]
root@# set system login user admin class super-user authentication
plain-text-password
7. Commit the configuration to activate it on the device.
[edit]
root@# commit
8. Log in as the administrative user you configured in Step 6.
9. Configure the name of the device. If the name includes spaces, enclose the name in
quotation marks (“ ”).
configure
[edit]
admin@# set system host-name host-name
10. Configure the traffic interface.
[edit]
admin@# set interfaces fe-0/0/1 unit 0 family inet address address/prefix-length
11. Configure the default route.
[edit]
admin@# set routing-options static route 0.0.0.0/0 next-hop gateway
12. Configure basic security zones and bind them to traffic interfaces.
[edit]
admin@# set security zones security-zone untrust interfaces fe-0/0/1
13. Configure basic security policies.
[edit]
admin@# set security policies from-zone trust to-zone untrust policy policy-name
match source-address any destination-address any application any
root@# set security policies from-zone trust to-zone untrust policy policy-name then
permit
14. Create a NAT rule for source translation of all Internet bound traffic.
[edit]
admin@# set security nat source rule-set interface-nat from zone trust
admin@# set security nat source rule-set interface-nat to zone untrust
admin@# set security nat source rule-set interface-nat rule rule1 match source-address
0.0.0.0/0 destination-address 0.0.0.0/0
admin@# set security nat source rule-set interface-nat rule rule1 then source-nat
interface
84
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
15. Check the configuration for validity.
[edit]
admin@# commit check
configuration check succeeds
16. Commit the configuration to activate it on the device.
[edit]
admin@# commit
commit complete
17. Optionally, display the configuration to verify that it is correct.
[edit]
user@host# show
system {
host-name devicea;
domain-name lab.device.net;
domain-search [ lab.device.net device.net ];
backup-device 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@devicea.lab.device.net";
}
name-server {
10.148.2.32;
}
services {
}
ntp {
server 10.148.2.21;
}
}
interfaces {
fe-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
18. Commit the configuration to activate it on the device.
[edit]
admin@# commit
19. Optionally, configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the device.
Copyright © 2016, Juniper Networks, Inc.
85
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
[edit]
admin@host# commit
20. When you have finished configuring the device, exit configuration mode.
[edit]
admin@host# exit
admin@host>
Related
Documentation
•
Connecting the SRX100 Services Gateway to the CLI
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
J-Web Interface
This topic includes the following sections:
•
Establishing Basic Connectivity on page 86
•
Configuring Basic System Properties on page 87
Establishing Basic Connectivity
To establish basic connectivity:
1.
Connect an Ethernet cable from any of ports 0/1 through 0/7 to the Ethernet port on
the management device (workstation or laptop).
2. Connect the power cable to the device and a power source. (We recommend using
a surge protector.) Note the following indications:
•
Power LED (steadily green): The device is receiving power.
•
Status LED (steadily green): The device is operating normally.
NOTE: The services gateway functions as a DHCP server and will assign
an IP address to the management device.
3. Ensure that the management device acquires an IP address on the 192.168.1.0/24
subnetwork (other than 192.168.1.1) from the device.
NOTE: If an IP address is not assigned to the management device,
manually configure an IP address in the 192.168.1.0/24 subnetwork. Do
not assign the 192.168.1.1 IP address to the management device, as this IP
address is assigned to the device.
86
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
4. Access the J-Web interface:
a. Launch a Web browser from the management device.
NOTE: To access the J-Web interface, your management device
requires a supported browser: either Microsoft Internet Explorer version
7.0 (or later) or Mozilla Firefox version 3.0 (or later).
b. Enter 192.168.1.1 in the Address box.
c. Specify the default user name as root. Do not enter any value in the Password box.
d. Press Enter. The J-Web Setup Wizard page opens.
5. Use the wizard to configure the basic settings, such as Hostname, Domain Name, and
Root Password, for your services gateway.
The upper left area of the wizard page shows where you are in the setup process. Click
a field in the wizard page to display information about that field in the lower left area
of the page.
You can also use the wizard to configure the following settings:
•
Default gateway
•
DNS servers
•
Domain search
•
VLANs
•
Interfaces
NOTE: All network and management access settings are optional.
Table 30 on page 88 and Table 31 on page 88 summarize the configuration
details for the initial setup.
6. Click Commit on the Review & Commit page to apply the configuration.
NOTE: After you configure the basic settings, the J-Web Setup wizard
redirects you to the J-Web pages where you can continue working in the
J-Web interface.
Configuring Basic System Properties
Table 30 on page 88 through Table 31 on page 88 summarizes the configuration details
for initial setup.
Copyright © 2016, Juniper Networks, Inc.
87
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 30: Required Setup Fields
Setup Wizard Page
Field
Your Action
Introduction
Read the introduction page for
basic instructions on using the
setup wizard. Click Start to
continue.
Configure System: Identification
Host Name
Type the name of the services
gateway.
Domain Name
Type the name of the network
or subnetwork to which the
services gateway belongs
Root Password (required)
Type the password that user
root will use to log in to the
device.
Verify Root Password
(required)
Retype the root password.
J-Web starting page options
Specify the tab you want to
appear when J-Web starts.
J-Web commit options
Specify when you want J-Web
to commit your configuration
changes.
Configure J-Web Preferences
Table 31: Optional Setup Fields
Field
Function
Your Action
Default Gateway
Type the IP address of the
default gateway.
DNS Name Servers
Type the IP address of each
server that maintains
databases for resolving
hostnames and IP addresses
and click Add.
Domain Search
Type the IP address or domain
name of each domain that
includes the services gateway
to include it in a DNS search
Configure System:
Identification
88
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
Table 31: Optional Setup Fields (continued)
Field
Function
Your Action
Interface Groups (VLANs)
Use buttons to add, edit, or
delete VLANs
Configure Interfaces
Use buttons to add, edit, or
delete interfaces other than
VLANs.
NOTE: Make sure that you
have selected the required
services and protocols under
Services (Inbound) and
Protocols (Inbound). Select all
to permit all protocols and
services.
Configure System: Time
Current System Time
Use Reset Manually button to
reset time.
Time Zone
Choose the time zone fromthe
list
NTP Servers
Add Network Time Protocol
(NTP) servers that the gateway
can reach to synchronize the
system time.
After you configure the basic setup, the Setup wizard is no longer available, unless you
reset the device to the factory default and reboot it. To make changes to the configuration,
use the J-Web interface or the command-line interface (CLI).
You can use other wizards to configure basic firewall policies, VPN settings, and NAT
rules. Choose Configure > Wizards to use the available wizards. Use the J-Web interface
or the CLI for more extensive configuration.
For more instructions on managing users and operations, monitoring network performance,
upgrading software, and diagnosing common problems on an SRX100 Series Services
Gateways, see the following guides:
Related
Documentation
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
SRX100 Services Gateway Software Configuration Overview on page 69
•
Performing Initial Software Configuration on the SRX100 Services Gateway Using the
CLI on page 83
Copyright © 2016, Juniper Networks, Inc.
89
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
SRX100 Services Gateway Secure Web Access Overview on page 74
Upgrading the SRX100 Services Gateway Low Memory Version to a High Memory
Version
Based on your requirements, you can upgrade from an SRX100 Services Gateway Low
Memory version to a High Memory version through a license key. You need not order a
separate High Memory device.
The double-data-rate (DDR) memory allocation in the SRX100 Services Gateway is as
follows:
•
SRX100 Services Gateway High Memory - 1 GB
•
SRX100 Services Gateway Low Memory - 512 MB
All SRX100 Services Gateways have a built-in DDR memory of 1 GB. The SRX100 Services
Gateway Low Memory devices can utilize a maximum of 512 MB of DDR memory. To
utilize 1 GB of DDR memory, you must upgrade your device to an SRX100 Services Gateway
High Memory version by installing the memory upgrade license. You can install the memory
license using the CLI configuration editor. For information on working with licences, see
Working with License Keys for SRX Series Devices.
For more information, see the following guides:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
NOTE: When you install the memory upgrade license on an SRX100 Services
Gateway Low Memory device, the device reboots automatically. When the
device is active again, it will function as a High Memory device.
NOTE: The memory upgrade license is a perpetual license. You can activate
this feature on the device by directly entering the license key (provided by
the licensing management system) in the CLI.
For more information on generating, installing, and managing licenses, see the following
guides:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
To obtain a memory license, contact your Juniper Networks customer services
representative.
90
Copyright © 2016, Juniper Networks, Inc.
Chapter 14: Performing Initial Configuration
Related
Documentation
•
SRX100 Services Gateway Features and Functions on page 4
•
SRX100 Services Gateway Specifications on page 24
Copyright © 2016, Juniper Networks, Inc.
91
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
92
Copyright © 2016, Juniper Networks, Inc.
PART 4
Maintaining and Troubleshooting
Components
•
Maintaining Components on page 95
•
Troubleshooting Components on page 97
Copyright © 2016, Juniper Networks, Inc.
93
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
94
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 15
Maintaining Components
•
Maintaining the SRX100 Services Gateway Hardware Components on page 95
Maintaining the SRX100 Services Gateway Hardware Components
Table 32 on page 95 describes the common tasks for maintaining the hardware
components of the services gateway.
Table 32: Maintenance Procedures for the SRX100 Services Gateway
Hardware Components
Maintenance
Procedures
Routine maintenance
Maintaining the
power supply
Description
For optimum performance of the services gateway, you should regularly
perform the following preventive maintenance procedures :
•
Inspect the installation site for moisture, loose wires or cables, and
excessive dust.
•
Make sure that airflow is unobstructed around the device and into the
air intake vents.
To maintain the power supply on the services gateway:
•
Make sure that the power and grounding cables are arranged so that
they do not obstruct access to other device components.
•
Periodically inspect the site to ensure that the grounding and power
cables connected to the device are securely in place and that there is
no moisture accumulating near the device.
CAUTION: We recommend using a surge protector for the power
connection.
Related
Documentation
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
Copyright © 2016, Juniper Networks, Inc.
95
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
96
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 16
Troubleshooting Components
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on page 105
•
Juniper Networks Technical Assistance Center on page 105
Monitoring the SRX100 Services Gateway Chassis Using the CLI
You can monitor alarms to troubleshoot hardware problems on a services gateway. The
chassis properties include the status of active chassis alarms on the device and the
environmental measurements of the device.
To view these chassis properties, select Monitor>Chassis in the J-Web interface, or enter
the following CLI show commands:
•
show chassis hardware
•
show chassis environment
•
show chassis fpc
•
show chassis alarms
•
show chassis hardware detail
Copyright © 2016, Juniper Networks, Inc.
97
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Examples:
The following examples provide the sample output of commands:
•
show chassis hardware
user@host > show chassis hardware
Item
Version
Part number
Chassis
Routing Engine
REV 00
750-02177
Serial number
Description
AU0209AF0022
SRX100h
BAAA0083
RE-SRX100H
FPC 0
FPC
PIC 0
8x FE Base PIC
Power Supply 0
•
show chassis hardware detail
user@host > show chassis hardware detail
Item
Version
Part number
Chassis
Routing Engine
da0
usb0 <addr 1>
usb0 <addr 2>
usb0 <addr 3>
REV 00
750-02177
Serial number
Description
AU0809AF0003
SRX100h
BAAA0116
RE-SRX100H
999 MB
ST72682
Nand Flash
DWC OTG root hub 0
vendor 0x0000
uhub0
product 0x005a 90
vendor 0x0409
uhub1
ST72682 High Speed Mode 64218 STMicroelectronics umass0
FPC 0
FPC
PIC 0
8x FE Base PIC
Power Supply 0
NOTE: The values given in the usb0 rows provide information for USB-level
debugging. This information is about USB hub topology.
•
show chassis environment
user@host > show chassis environment
•
98
Class Item
Status
Measurement
Temp
Routing Engine
OK
43 degrees C / 109 degrees F
Power Power Supply 0
OK
show chassis fpc
Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Troubleshooting Components
user@host > show chassis fpc
Temp
CPU Utilization (%)
Slot State
0
•
Online
(C)
Total
Memory
Interrupt
Utilization (%)
DRAM (MB) Heap
Buffer
-------------------- CPU less FPC --------------------
show chassis alarms
user@host > show chassis alarms
No alarms currently active
Related
Documentation
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Maintaining the SRX100 Services Gateway Hardware Components on page 95
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Juniper Networks Technical Assistance Center on page 105
Monitoring the SRX100 Services Gateway Components Using LEDs
Table 33 on page 99 describes the status of the LEDs on startup of the device.
Table 33: Services Gateway LED Status on Startup
LED
State
Description
Status LED
Amber
Indicates that the device is starting up.
Alarm LED
Amber
Indicates that the device is starting up
for the first time since no rescue
configuration is set.
NOTE: When the system is up and
running, if the Alarm LED is off, it
indicates that no alarms are present on
the device.
Power LED
Green
Indicates that the device is receiving
normal power supply.
HA LED
Off
Indicates that the device is not part of
chassis clustering set up.
The LEDs available on the services gateway display the status of various components.
Table 34 on page 100 describes the LEDs.
Copyright © 2016, Juniper Networks, Inc.
99
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Table 34: Component LEDs on the Services Gateway
LED
State
Meaning
Possible Causes and
Corrective Actions
Status LED
Green
Indicates that the device is
functioning normally.
Normal condition. No action
is required.
Amber
•
Indicates that the device
is starting up.
Normal condition. No action
is required.
•
Indicates that the Reset
Config button is pressed.
Alarm LED
100
Red
Indicates that an error is
detected in the device.
Contact JTAC. See “Juniper
Networks Technical
Assistance Center” on
page 105.
Red
Indicates a major alarm.
Major alarm indicates a
critical situation on the
services gateway that
requires immediate action.
See “Monitoring the
SRX100 Services Gateway
Using Chassis Alarm
Conditions” on page 101.
Amber
Indicates a minor alarm.
Minor alarm condition
requires monitoring or
maintenance. If left
unchecked, it might cause
an interruption in service or
degradation in
performance. See
“Monitoring the SRX100
Services Gateway Using
Chassis Alarm Conditions”
on page 101.
Off
Indicates that there are
currently no alarms.
Normal condition. No action
is required.
Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Troubleshooting Components
Table 34: Component LEDs on the Services Gateway (continued)
LED
State
Meaning
Possible Causes and
Corrective Actions
Power LED
Green
Indicates that the device is
functioning normally.
Normal condition. No action
is required.
Amber
Indicates that the Power
button has been pressed and
quickly released and the
device is gracefully shutting
down.
Normal condition. No action
is required.
Off
Off indicates that the device
is not receiving power.
Normal condition if the
services gateway is
switched-off. No action is
required.
If you have not powered off
the services gateway, verify
that the AC power cord
from the power source to
the device is not damaged,
the socket is in working
condition, and the device
has an AC input voltage
between 100 and 240 VAC.
See “Monitoring the
SRX100 Services Gateway
Power System” on page 103.
Related
Documentation
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
•
Juniper Networks Technical Assistance Center on page 105
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions
When the services gateway detects an alarm condition, the alarm LED on the front panel
turns red or amber as appropriate.
To view a more detailed description of the alarm cause, issue the show chassis alarms
CLI command.
For more information on the show chassis alarms command, see the following topics:
•
Initial Configuration for Security Devices
Copyright © 2016, Juniper Networks, Inc.
101
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Monitoring and Troubleshooting for Security Devices
Table 35 on page 102 describes alarms that can occur for an SRX100 Services Gateway
chassis component.
Table 35: SRX100 Services Gateway Chassis Alarm Conditions and
Corrective Actions
Component
Alarm Conditions
Action
Boot media
The services gateway
boots from an alternate
boot device.
•
Alarm
Severity
If the internal flash memory fails at
startup, the services gateway
automatically boots itself from the
alternative boot device (USB storage
device).
Amber
(minor)
NOTE: If you configured your services
gateway to boot from an alternative
boot device, ignore this alarm
condition.
•
Reformat the internal flash memory
and install a bootable image. (See
theInitial Configuration for Security
Devices and Monitoring and
Troubleshooting for Security
Devices)
•
Hardware
components
on the
services
gateway
Related
Documentation
102
If you did not configure the services
gateway to boot from an alternative
boot device, contact JTAC. See
“Juniper Networks Technical
Assistance Center” on page 105.
The services gateway
chassis temperature or
chassis is too warm
Check the room temperature. See
“SRX100 Services Gateway
Specifications” on page 24.
Amber
(minor)
The services gateway
temperature is too high,
either because of an
internal overheating
condition or because the
maximum recommended
room temperature has
been exceeded.
The services gateway shuts down
automatically in 4 minutes.
Red
(major)
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Troubleshooting Components
•
Juniper Networks Technical Assistance Center on page 105
Monitoring the SRX100 Services Gateway Power System
The LEDs on the services gateway enable you to determine the performance and
operation. The Power LED, located on the front panel of the services gateway, indicates
the different settings with respect to the power system.
Table 36 on page 103 describes different Power LED status settings and their corrective
actions.
Table 36: Services Gateway Power LED Status
Related
Documentation
Possible Cause and Corrective
Action
LED Status
Meaning
Green
Device is receiving power,
and the internal power
supply is functional.
Normal indication. No action is required.
Amber
Indicates that the power
button has been pressed
and quickly released.
Normal indication. No action is required.
Off
Indicates that the device
is not receiving power.
•
Verify that the AC power cord from
the power source to the device is not
damaged. If the insulation is cracked
or broken, immediately replace the
cord or cable.
•
Ensure that the socket you plug in is
in working condition.
•
Ensure the device has an AC input
voltage between 100 and 240 VAC.
•
If you cannot determine the cause
of the problem or need additional
assistance, see “Juniper Networks
Technical Assistance Center” on
page 105.
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
•
Juniper Networks Technical Assistance Center on page 105
Copyright © 2016, Juniper Networks, Inc.
103
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Using the Reset Config Button on the SRX100 Services Gateway
If a configuration fails or denies management access to the services gateway, you can
use the RESET CONFIG button to restore the device to the factory-default configuration
or a rescue configuration. For example, if someone inadvertently commits a configuration
that denies management access to a services gateway, you can delete the invalid
configuration and replace it with a rescue configuration by pressing the RESET CONFIG
button.
NOTE: The RESET CONFIG button is recessed to prevent it from being pressed
accidentally.
The rescue configuration is a previously committed, valid configuration. You must have
previously set the rescue configuration through the J-Web interface or the CLI.
To press the RESET CONFIG button, insert a small probe (such as a straightened paper
clip) into the pinhole on the front panel.
•
By default, pressing and quickly releasing the RESET CONFIG button loads and commits
the rescue configuration through the J-Web interface or the CLI. The Status LED is solid
amber during this time.
•
By default, pressing and holding the RESET CONFIG button for 15 seconds or more—until
the Status LED is solid amber — deletes all configurations on the device, including the
backup configurations and rescue configuration, and loads and commits the factory
configuration.
For details about factory-default settings, see Viewing Factory Default Settings of the
SRX240 Services Gateway.
For details about performing initial software configuration, see the following topics:
Related
Documentation
104
•
Performing Initial Software Configuration on the SRX240 Services Gateway Using the
J-Web Interface
•
Performing Initial Software Configuration on the SRX240 Services Gateway Using the
CLI
•
Changing the Reset Config Button Behavior on the SRX100 Services Gateway on
page 105
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Juniper Networks Technical Assistance Center on page 105
Copyright © 2016, Juniper Networks, Inc.
Chapter 16: Troubleshooting Components
Changing the Reset Config Button Behavior on the SRX100 Services Gateway
You can change the default operation of the RESET CONFIG button by limiting how the
button resets the services gateway:
•
To prevent the RESET CONFIG button from setting the device to the factory-default
configuration and deleting all other configurations:
admin@host# set chassis config-button no-clear
You can still press and quickly release the button to reset it to the rescue configuration.
•
To prevent the RESET CONFIG button from setting the device to the rescue
configuration:
admin@host# set chassis config-button no-rescue
You can still press and hold the button for 15 seconds or more to reset the gateway to
the factory-default configuration.
•
To disable the button and prevent the device from resetting to either configuration:
admin@host# set chassis config-button no-clear no-rescue
The no-clear option prevents the RESET CONFIG button from deleting all configurations
on the services gateway. The no-rescue option prevents the RESET CONFIG button from
loading the rescue configuration.
To return the function of the RESET CONFIG button to its default behavior, remove the
config-button statement from the device configuration.
Related
Documentation
•
Using the Reset Config Button on the SRX100 Services Gateway on page 104
•
Monitoring the SRX100 Services Gateway Chassis Using the CLI on page 97
•
Monitoring the SRX100 Services Gateway Components Using LEDs on page 99
•
Monitoring the SRX100 Services Gateway Using Chassis Alarm Conditions on page 101
•
Monitoring the SRX100 Services Gateway Power System on page 103
•
Juniper Networks Technical Assistance Center on page 105
Juniper Networks Technical Assistance Center
If you need assistance while troubleshooting a services gateway, open a support case
using the Case Manager link at http://www.juniper.net/support/ , or call 1-888-314-JTAC
(within the United States) or 1-408-745-9500 (from outside the United States).
Related
Documentation
•
Contacting Customer Support on page 109
Copyright © 2016, Juniper Networks, Inc.
105
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
106
Copyright © 2016, Juniper Networks, Inc.
PART 5
Replacing Components
•
Contacting Customer Support and Returning Components on page 109
Copyright © 2016, Juniper Networks, Inc.
107
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
108
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 17
Contacting Customer Support and
Returning Components
•
Contacting Customer Support on page 109
•
Return Procedure for the SRX100 Services Gateway on page 110
•
Information You Might Need to Supply to Juniper Networks Technical Assistance
Center on page 110
•
Locating the SRX100 Services Gateway Component Serial Number and Agency
Labels on page 111
•
Packing the SRX100 Services Gateway and Components for Shipment on page 112
Contacting Customer Support
Once you have located the serial numbers of the services gateway or component, you
can return them for repair or replacement. For this, you need to contact Juniper Networks
Technical Assistance Center (JTAC).
You can contact JTAC 24 hours a day, 7 days a week, using any of the following methods:
•
On the Web: Using the Case Manager link at http://www.juniper.net/support/
•
By telephone:
•
From the US and Canada: 1-888-314-JTAC
•
From all other locations: 1-408-745-9500
NOTE: If contacting JTAC by telephone, enter your 11-digit case number
followed by the pound (#) key if this is an existing case, or press the star
(*) key to be routed to the next available support engineer.
Related
Documentation
•
Return Procedure for the SRX100 Services Gateway on page 110
•
Locating the SRX100 Services Gateway Component Serial Number and Agency Labels
on page 111
•
Packing the SRX100 Services Gateway and Components for Shipment on page 112
Copyright © 2016, Juniper Networks, Inc.
109
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Return Procedure for the SRX100 Services Gateway
To return an SRX100 Services Gateway or component to Juniper Networks for repair or
replacement:
1.
Determine the part number and serial number of the device or component. See
“Locating the SRX100 Services Gateway Component Serial Number and Agency
Labels” on page 111.
2. Obtain a Return Materials Authorization (RMA) number from JTAC. See “Contacting
Customer Support” on page 109.
NOTE: Do not return the device or any component to Juniper Networks
unless you have first obtained an RMA number. Juniper Networks reserves
the right to refuse shipments that do not have an RMA. Refused shipments
are returned to the customer via collect freight.
3. Pack the SRX100 Services Gateway or component for shipping. See “Packing the
SRX100 Services Gateway and Components for Shipment” on page 112.
For more information about return and repair policies, see the customer support Web
page at http://www.juniper.net/support/guidelines.html.
For product problems or technical support issues, open a support case using the Case
Manager link at http://www.juniper.net/support/ or call 1-888-314-JTAC (within the United
States) or 1-408-745-9500 (outside the United States).
Related
Documentation
•
Locating the SRX100 Services Gateway Component Serial Number and Agency Labels
on page 111
•
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 110
•
Packing the SRX100 Services Gateway and Components for Shipment on page 112
•
Contacting Customer Support on page 109
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
If you are returning a services gateway or hardware component to Juniper Networks for
repair or replacement, obtain a Return Materials Authorization (RMA) number from
Juniper Networks Technical Assistance Center (JTAC).
When requesting support from JTAC by telephone, be prepared to provide the following
information:
110
•
Your existing case number, if you have one
•
Details of the failure or problem
•
Type of activity being performed on the services gateway when the problem occurred
Copyright © 2016, Juniper Networks, Inc.
Chapter 17: Contacting Customer Support and Returning Components
Related
Documentation
•
Configuration data displayed by one or more show commands
•
Your name, organization name, telephone number, fax number, and shipping address
•
Return Procedure for the SRX100 Services Gateway on page 110
•
Locating the SRX100 Services Gateway Component Serial Number and Agency Labels
on page 111
•
Packing the SRX100 Services Gateway and Components for Shipment on page 112
•
Contacting Customer Support on page 109
Locating the SRX100 Services Gateway Component Serial Number and Agency Labels
Listing the SRX100 Services Gateway and Component Details with the CLI
Before contacting Juniper Networks to request an RMA, you must find the serial number
on the SRX100 Services Gateway or component.
To list all of the SRX100 Services Gateway components and their serial numbers, enter
the following CLI show command:
user@host> show chassis hardware
The output is as follows:
Hardware inventory:
Item
Version
Part number
Chassis
Routing Engine
REV 00
750-02177
Serial number
Description
AU0209AF0022
SRX100h
BAAA0083
RE-SRX100-HIGHMEM
FPC 0
FPC
PIC 0
8x FE Base PIC
Power Supply 0
SRX100 Services Gateway Chassis Serial Number and Agency Labels
The SRX100 Services Gateway has a serial number ID and agency labels on the bottom
of the chassis as shown in Figure 17 on page 112.
Copyright © 2016, Juniper Networks, Inc.
111
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Figure 17: Location of SRX100 Services Gateway Serial Number and Agency
Labels
Related
Documentation
•
Return Procedure for the SRX100 Services Gateway on page 110
•
Contacting Customer Support on page 109
Packing the SRX100 Services Gateway and Components for Shipment
This topic describes how to pack the services gateway or components for shipment.
Packing the Services Gateway for Shipment
To pack the services gateway for shipment:
1.
Retrieve the shipping carton and packing materials in which the device was originally
shipped. If you do not have these materials, contact your Juniper Networks
representative about approved packaging materials.
2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect
the strap to the ESD point on the chassis or to an outside ESD point if the device is
disconnected from earth ground.
3. On the console or other management device connected to the services gateway, enter
CLI operational mode and issue the following command to shut down the services
gateway software:
user@host> request system power-off
Wait until a message appears on the console confirming that the operating system
has halted.
112
Copyright © 2016, Juniper Networks, Inc.
Chapter 17: Contacting Customer Support and Returning Components
4. Shut down power to the device by pressing the Power button on the front panel of
the device.
5. Disconnect power from the device.
6. Remove the cables that connect to all external devices.
7. Remove all field-replaceable units (FRUs) from the device.
8. If the device is installed on a wall or rack, have one person support the weight of the
device while another person unscrews and removes the mounting screws.
9. Place the device in the shipping carton.
10. Cover the device with an ESD bag, and place the packing foam on top of and around
the device.
11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed.
13. Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
Packing the Components for Shipment
Follow these guidelines for packing and shipping individual components of the services
gateway:
•
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION: Do not stack any of the services gateway components during
packing.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Locating the SRX100 Services Gateway Component Serial Number and Agency Labels
on page 111
•
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 110
•
Return Procedure for the SRX100 Services Gateway on page 110
•
Juniper Networks Technical Assistance Center on page 105
Copyright © 2016, Juniper Networks, Inc.
113
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
114
Copyright © 2016, Juniper Networks, Inc.
PART 6
Safety and Regulatory Compliance
Information
•
General Safety Guidelines and Warnings on page 117
•
Fire Safety Requirements on page 125
•
Installation Safety Guidelines and Warnings on page 127
•
Laser and LED Safety Guidelines and Warnings on page 133
•
Maintenance and Operational Safety Guidelines and Warnings on page 137
•
Electrical Safety Guidelines and Warnings on page 143
•
Agency Approvals and Regulatory Compliance Information on page 145
Copyright © 2016, Juniper Networks, Inc.
115
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
116
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 18
General Safety Guidelines and Warnings
•
SRX100 Services Gateway Definition of Safety Warning Levels on page 117
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
•
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 123
SRX100 Services Gateway Definition of Safety Warning Levels
This topic defines the following four levels of safety warnings used in Juniper Networks
technical publications:
NOTE: You might find this information helpful in a particular situation or
might otherwise overlook it.
CAUTION: You need to observe the specified guidelines to avoid minor injury
or discomfort to you or severe damage to the services gateway.
WARNING: This symbol is used with laser warnings. Unterminated optical
connectors can emit invisible laser radiation. Focusing your eye directly on a
laser source—even a low-power laser—could permanently damage the eye.
WARNING: This symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in
een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige
apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische
schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard
maatregelen om ongelukken te voorkomen.
Copyright © 2016, Juniper Networks, Inc.
117
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi
johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa,
ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista
onnettomuuksien ehkäisykeinoista.
Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez
dans une situation pouvant causer des blessures ou des dommages corporels.
Avant de travailler sur un équipement, soyez conscient des dangers posés
par les circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents.
Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer
Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der
Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen
Stromkreisen verbundenen Gefahren und der Standardpraktiken zur
Vermeidung von Unfällen bewußt.
Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione
potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi
apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed
essere al corrente delle pratiche standard per la prevenzione di incidenti.
Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som
kan føre til personskade. Før du utfører arbeid på utstyr, må du vare
oppmerksom på de faremomentene som elektriske kretser innebærer, samt
gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker.
Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que
lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer
equipamento, familiarize-se com os perigos relacionados com circuitos
eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis
acidentes.
¡Atención! Este símbolo de aviso significa peligro. Existe riesgo para su
integridad física. Antes de manipular cualquier equipo, considerar los riesgos
que entraña la corriente eléctrica y familiarizarse con los procedimientos
estándar de prevención de accidentes.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation
som kan leda till personskada. Innan du utför arbete på någon utrustning
måste du vara medveten om farorna med elkretsar och känna till vanligt
förfarande för att förebygga skador.
Related
Documentation
118
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
•
SRX100 Services Gateway Fire Safety Requirements on page 125
•
SRX100 Services Gateway Installation Safety Guidelines and Warnings on page 127
•
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on page 133
Copyright © 2016, Juniper Networks, Inc.
Chapter 18: General Safety Guidelines and Warnings
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
•
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 137
SRX100 Services Gateway General Safety Guidelines and Warnings
This topic includes the following sections:
•
General Safety Guidelines and Warnings on page 119
•
Qualified Personnel Warning on page 120
•
Restricted Access Area Warning on page 120
•
Preventing Electrostatic Discharge Damage to the Services Gateway on page 122
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the services gateway from
damage. The list of guidelines might not address all potentially hazardous situations in
your working environment, so it is important that you remain alert and exercise good
judgment at all times.
•
Perform only the procedures explicitly described in these topics. Ensure that only
authorized service personnel perform other system services.
•
Keep the area around the chassis clear and free from dust before, during, and after
installation.
•
Keep tools away from areas where people could trip on them.
•
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
•
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
•
Never install or manipulate wiring during electrical storms.
•
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
•
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this guide. Such an action could cause severe electrical shock.
•
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
•
Avoid spilling liquid onto the services gateway chassis or onto any services gateway
component. Such an action could cause electrical shock or damage the services
gateway.
•
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Copyright © 2016, Juniper Networks, Inc.
119
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Qualified Personnel Warning
WARNING: Only trained and qualified personnel should install or replace the
services gateway.
Waarschuwing Installatie en reparaties mogen uitsluitend door getraind en
bevoegd personeel uitgevoerd worden.
Varoitus Ainoastaan koulutettu ja pätevä henkilökunta saa asentaa tai vaihtaa
tämän laitteen.
Attention Tout installation ou remplacement de l'appareil doit être réalisé
par du personnel qualifié et compétent.
Warnung Gerät nur von geschultem, qualifiziertem Personal installieren oder
auswechseln lassen.
Avvertenza Solo personale addestrato e qualificato deve essere autorizzato
ad installare o sostituire questo apparecchio.
Advarsel Kun kvalifisert personell med riktig opplæring bør montere eller
bytte ut dette utstyret.
Aviso Este equipamento deverá ser instalado ou substituído apenas por
pessoal devidamente treinado e qualificado.
¡Atención! Estos equipos deben ser instalados y reemplazados
exclusivamente por personal técnico adecuadamente preparado y capacitado.
Varning! Denna utrustning ska endast installeras och bytas ut av utbildad
och kvalificerad personal.
Restricted Access Area Warning
WARNING: The services gateway is intended for installation in restricted
access areas. A restricted access area is an area to which access can be
gained only by service personnel through the use of a special tool, lock and
key, or other means of security, and which is controlled by the authority
responsible for the location.
Waarschuwing Dit toestel is bedoeld voor installatie op plaatsen met beperkte
toegang. Een plaats met beperkte toegang is een plaats waar toegang slechts
door servicepersoneel verkregen kan worden door middel van een speciaal
instrument, een slot en sleutel, of een ander veiligheidsmiddel, en welke
beheerd wordt door de overheidsinstantie die verantwoordelijk is voor de
locatie.
Varoitus Tämä laite on tarkoitettu asennettavaksi paikkaan, johon pääsy on
rajoitettua. Paikka, johon pääsy on rajoitettua, tarkoittaa paikkaa, johon vain
120
Copyright © 2016, Juniper Networks, Inc.
Chapter 18: General Safety Guidelines and Warnings
huoltohenkilöstö pääsee jonkin erikoistyökalun, lukkoon sopivan avaimen
tai jonkin muun turvalaitteen avulla ja joka on paikasta vastuussa olevien
toimivaltaisten henkilöiden valvoma.
Attention Cet appareil est à installer dans des zones d'accès réservé. Ces
dernières sont des zones auxquelles seul le personnel de service peut accéder
en utilisant un outil spécial, un mécanisme de verrouillage et une clé, ou tout
autre moyen de sécurité. L'accès aux zones de sécurité est sous le contrôle
de l'autorité responsable de l'emplacement.
Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem
Zutritt vorgesehen. Ein Bereich mit beschränktem Zutritt ist ein Bereich, zu
dem nur Wartungspersonal mit einem Spezialwerkzeugs, Schloß und
Schlüssel oder anderer Sicherheitsvorkehrungen Zugang hat, und der von
dem für die Anlage zuständigen Gremium kontrolliert wird.
Avvertenza Questa unità deve essere installata in un'area ad accesso limitato.
Un'area ad accesso limitato è un'area accessibile solo a personale di
assistenza tramite un'attrezzo speciale, lucchetto, o altri dispositivi di
sicurezza, ed è controllata dall'autorità responsabile della zona.
Advarsel Denne enheten er laget for installasjon i områder med begrenset
adgang. Et område med begrenset adgang gir kun adgang til servicepersonale
som bruker et spesielt verktøy, lås og nøkkel, eller en annen
sikkerhetsanordning, og det kontrolleres av den autoriteten som er ansvarlig
for området.
Aviso Esta unidade foi concebida para instalação em áreas de acesso restrito.
Uma área de acesso restrito é uma área à qual apenas tem acesso o pessoal
de serviço autorizado, que possua uma ferramenta, chave e fechadura
especial, ou qualquer outra forma de segurança. Esta área é controlada pela
autoridade responsável pelo local.
¡Atención! Esta unidad ha sido diseñada para instalarse en áreas de acceso
restringido. Área de acceso restringido significa un área a la que solamente
tiene acceso el personal de servicio mediante la utilización de una herramienta
especial, cerradura con llave, o algún otro medio de seguridad, y que está
bajo el control de la autoridad responsable del local.
Varning! Denna enhet är avsedd för installation i områden med begränsat
tillträde. Ett område med begränsat tillträde får endast tillträdas av
servicepersonal med ett speciellt verktyg, lås och nyckel, eller annan
säkerhetsanordning, och kontrolleras av den auktoritet som ansvarar för
området.
Copyright © 2016, Juniper Networks, Inc.
121
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Preventing Electrostatic Discharge Damage to the Services Gateway
Many services gateway hardware components are sensitive to damage from static
electricity. Some components can be impaired by voltages as low as 30 V. You can easily
generate potentially damaging static voltages whenever you handle plastic or foam
packing material or if you move components across plastic or carpets. Observe the
following guidelines to minimize the potential for electrostatic discharge (ESD) damage,
which can cause intermittent or complete component failures:
•
Always use an ESD wrist strap or ankle strap, and verify that it is in direct contact with
your skin.
CAUTION: For safety, periodically check the resistance value of the ESD
strap. The measurement should be in the range of 1 to 10 Mohms.
•
When handling any component that is removed from the chassis, verify that the
equipment end of your ESD strap is attached to one of the ESD points on the chassis.
•
Avoid contact between the component and your clothing. ESD voltages emitted from
clothing can still damage components.
•
When removing or installing a component, always place it component-side up on an
antistatic surface, in an antistatic card rack, or in an electrostatic bag. If you are returning
a component, place it into an electrostatic bag before packing it. See
Figure 18 on page 122.
Figure 18: Placing a Component into an Electrostatic Bag
AD
SL
2/2+
A
SY
NC
X
g031023
TX/R
Related
Documentation
122
•
SRX100 Services Gateway Definition of Safety Warning Levels on page 117
•
SRX100 Services Gateway Fire Safety Requirements on page 125
Copyright © 2016, Juniper Networks, Inc.
Chapter 18: General Safety Guidelines and Warnings
SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment along with a list of safety warnings, see Appendix A, Safety and Regulatory
Compliance Information.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
•
Required Tools and Parts for Installing and Maintaining the SRX100 Services Gateway
on page 41
•
Preparing the SRX100 Services Gateway for Rack-Mount Installation on page 47
•
Preparing the SRX100 Services Gateway for Desk-Mount Installation on page 48
•
Preparing the SRX100 Services Gateway for Wall-Mount Installation on page 48
•
General Site Guidelines for Installing the SRX100 Services Gateway on page 24
Copyright © 2016, Juniper Networks, Inc.
123
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
124
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 19
Fire Safety Requirements
•
SRX100 Services Gateway Fire Safety Requirements on page 125
SRX100 Services Gateway Fire Safety Requirements
In the event of a fire emergency involving devices and other network equipment, the
safety of people is the primary concern. Establish procedures for protecting people in
the event of a fire emergency, provide safety training, and properly provision fire-control
equipment and fire extinguishers.
In addition, establish procedures to protect your equipment in the event of a fire
emergency. Juniper Networks products should be installed in an environment suitable
for electronic equipment. We recommend that fire suppression equipment be available
in the event of a fire in the vicinity of the equipment and that all local fire, safety, and
electrical codes and ordinances be observed when installing and operating your
equipment.
In the event of an electrical hazard or an electrical fire, first turn power off to the equipment
at the source. Then use a Type C fire extinguisher to extinguish the fire. Type C fire
extinguishers, which use noncorrosive fire retardants such as carbon dioxide (CO ) and
2
Halotron, are most effective for suppressing electrical fires. Type C fire extinguishers
displace the oxygen from the point of combustion to eliminate the fire. For extinguishing
fire on or around equipment that draws air from the environment for cooling, use this
type of inert oxygen displacement extinguisher instead of an extinguisher that leaves
residue on equipment.
Do not use multipurpose Type ABC chemical fire extinguishers (dry chemical fire
extinguishers) near Juniper Networks equipment. The primary ingredient in these fire
extinguishers is monoammonium phosphate, which is very sticky and difficult to clean.
In addition, in minute amounts of moisture, monoammonium phosphate can become
highly corrosive and corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
Copyright © 2016, Juniper Networks, Inc.
125
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks services gateway. If a dry
chemical fire extinguisher is used, the unit is no longer eligible for coverage
under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
Related
Documentation
126
•
SRX100 Services Gateway General Safety Guidelines and Warnings on page 119
•
SRX100 Services Gateway Installation Safety Guidelines and Warnings on page 127
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 20
Installation Safety Guidelines and
Warnings
•
SRX100 Services Gateway Installation Safety Guidelines and Warnings on page 127
SRX100 Services Gateway Installation Safety Guidelines and Warnings
Installation Instructions Warning
WARNING: Read the installation instructions before you connect the services
gateway to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Rack-Mounting Requirements and Warnings
Copyright © 2016, Juniper Networks, Inc.
127
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Ensure that the equipment rack into which the services gateway is installed is evenly and
securely supported to avoid the hazardous condition that could result from uneven
mechanical loading.
WARNING: To prevent bodily injury when mounting or servicing the services
gateway in a rack, take the following precautions to ensure that the system
remains stable. The following directives help maintain your safety:
•
The services gateway must be installed into a rack that is secured to the
building structure.
•
The services gateway should be mounted at the bottom of the rack if it is
the only unit in the rack.
•
When mounting the services gateway in a partially filled rack, load the rack
from the bottom to the top with the heaviest component at the bottom of
the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the services gateway in the rack.
Waarschuwing Om lichamelijk letsel te voorkomen wanneer u dit toestel in
een rek monteert of het daar een servicebeurt geeft, moet u speciale
voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel stabiel
blijft. De onderstaande richtlijnen worden verstrekt om uw veiligheid te
verzekeren:
•
De Juniper Networks services gateway moet in een stellage worden
geïnstalleerd die aan een bouwsel is verankerd.
•
Dit toestel dient onderaan in het rek gemonteerd te worden als het toestel
het enige in het rek is.
•
Wanneer u dit toestel in een gedeeltelijk gevuld rek monteert, dient u het
rek van onderen naar boven te laden met het zwaarste onderdeel onderaan
in het rek.
•
Als het rek voorzien is van stabiliseringshulpmiddelen, dient u de
stabilisatoren te monteren voordat u het toestel in het rek monteert of het
daar een servicebeurt geeft.
Varoitus Kun laite asetetaan telineeseen tai huolletaan sen ollessa telineessä,
on noudatettava erityisiä varotoimia järjestelmän vakavuuden säilyttämiseksi,
jotta vältytään loukkaantumiselta. Noudata seuraavia turvallisuusohjeita:
128
•
Juniper Networks services gateway on asennettava telineeseen, joka on
kiinnitetty rakennukseen.
•
Jos telineessä ei ole muita laitteita, aseta laite telineen alaosaan.
Copyright © 2016, Juniper Networks, Inc.
Chapter 20: Installation Safety Guidelines and Warnings
•
Jos laite asetetaan osaksi täytettyyn telineeseen, aloita kuormittaminen
sen alaosasta kaikkein raskaimmalla esineellä ja siirry sitten sen yläosaan.
•
Jos telinettä varten on vakaimet, asenna ne ennen laitteen asettamista
telineeseen tai sen huoltamista siinä.
Attention Pour éviter toute blessure corporelle pendant les opérations de
montage ou de réparation de cette unité en casier, il convient de prendre des
précautions spéciales afin de maintenir la stabilité du système. Les directives
ci-dessous sont destinées à assurer la protection du personnel:
•
Le rack sur lequel est monté le Juniper Networks services gateway doit être
fixé à la structure du bâtiment.
•
Si cette unité constitue la seule unité montée en casier, elle doit être placée
dans le bas.
•
Si cette unité est montée dans un casier partiellement rempli, charger le
casier de bas en haut en plaçant l'élément le plus lourd dans le bas.
•
Si le casier est équipé de dispositifs stabilisateurs, installer les stabilisateurs
avant de monter ou de réparer l'unité en casier.
Warnung Zur Vermeidung von Körperverletzung beim Anbringen oder Warten
dieser Einheit in einem Gestell müssen Sie besondere Vorkehrungen treffen,
um sicherzustellen, daß das System stabil bleibt. Die folgenden Richtlinien
sollen zur Gewährleistung Ihrer Sicherheit dienen:
•
Der Juniper Networks services gateway muß in einem Gestell installiert
werden, das in der Gebäudestruktur verankert ist.
•
Wenn diese Einheit die einzige im Gestell ist, sollte sie unten im Gestell
angebracht werden.
•
Bei Anbringung dieser Einheit in einem zum Teil gefüllten Gestell ist das
Gestell von unten nach oben zu laden, wobei das schwerste Bauteil unten
im Gestell anzubringen ist.
•
Wird das Gestell mit Stabilisierungszubehör geliefert, sind zuerst die
Stabilisatoren zu installieren, bevor Sie die Einheit im Gestell anbringen
oder sie warten.
Avvertenza Per evitare infortuni fisici durante il montaggio o la manutenzione
di questa unità in un supporto, occorre osservare speciali precauzioni per
garantire che il sistema rimanga stabile. Le seguenti direttive vengono fornite
per garantire la sicurezza personale:
Copyright © 2016, Juniper Networks, Inc.
•
Il Juniper Networks services gateway deve essere installato in un telaio, il
quale deve essere fissato alla struttura dell'edificio.
•
Questa unità deve venire montata sul fondo del supporto, se si tratta
dell'unica unità da montare nel supporto.
129
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Quando questa unità viene montata in un supporto parzialmente pieno,
caricare il supporto dal basso all'alto, con il componente più pesante
sistemato sul fondo del supporto.
•
Se il supporto è dotato di dispositivi stabilizzanti, installare tali dispositivi
prima di montare o di procedere alla manutenzione dell'unità nel supporto.
Advarsel Unngå fysiske skader under montering eller reparasjonsarbeid på
denne enheten når den befinner seg i et kabinett. Vær nøye med at systemet
er stabilt. Følgende retningslinjer er gitt for å verne om sikkerheten:
•
Juniper Networks services gateway må installeres i et stativ som er forankret
til bygningsstrukturen.
•
Denne enheten bør monteres nederst i kabinettet hvis dette er den eneste
enheten i kabinettet.
•
Ved montering av denne enheten i et kabinett som er delvis fylt, skal
kabinettet lastes fra bunnen og opp med den tyngste komponenten nederst
i kabinettet.
•
Hvis kabinettet er utstyrt med stabiliseringsutstyr, skal stabilisatorene
installeres før montering eller utføring av reparasjonsarbeid på enheten i
kabinettet.
Aviso Para se prevenir contra danos corporais ao montar ou reparar esta
unidade numa estante, deverá tomar precauções especiais para se certificar
de que o sistema possui um suporte estável. As seguintes directrizes
ajudá-lo-ão a efectuar o seu trabalho com segurança:
•
O Juniper Networks services gateway deverá ser instalado numa prateleira
fixa à estrutura do edificio.
•
Esta unidade deverá ser montada na parte inferior da estante, caso seja
esta a única unidade a ser montada.
•
Ao montar esta unidade numa estante parcialmente ocupada, coloque os
itens mais pesados na parte inferior da estante, arrumando-os de baixo
para cima.
•
Se a estante possuir um dispositivo de estabilização, instale-o antes de
montar ou reparar a unidade.
¡Atención! Para evitar lesiones durante el montaje de este equipo sobre un
bastidor, o posteriormente durante su mantenimiento, se debe poner mucho
cuidado en que el sistema quede bien estable. Para garantizar su seguridad,
proceda según las siguientes instrucciones:
130
•
El Juniper Networks services gateway debe instalarse en un bastidor fijado
a la estructura del edificio.
•
Colocar el equipo en la parte inferior del bastidor, cuando sea la única
unidad en el mismo.
Copyright © 2016, Juniper Networks, Inc.
Chapter 20: Installation Safety Guidelines and Warnings
•
Cuando este equipo se vaya a instalar en un bastidor parcialmente ocupado,
comenzar la instalación desde la parte inferior hacia la superior colocando
el equipo más pesado en la parte inferior.
•
Si el bastidor dispone de dispositivos estabilizadores, instalar éstos antes
de montar o proceder al mantenimiento del equipo instalado en el bastidor.
Varning! För att undvika kroppsskada när du installerar eller utför
underhållsarbete på denna enhet på en ställning måste du vidta särskilda
försiktighetsåtgärder för att försäkra dig om att systemet står stadigt. Följande
riktlinjer ges för att trygga din säkerhet:
Related
Documentation
•
Juniper Networks services gateway måste installeras i en ställning som är
förankrad i byggnadens struktur.
•
Om denna enhet är den enda enheten på ställningen skall den installeras
längst ned på ställningen.
•
Om denna enhet installeras på en delvis fylld ställning skall ställningen
fyllas nedifrån och upp, med de tyngsta enheterna längst ned på ställningen.
•
Om ställningen är försedd med stabiliseringsdon skall dessa monteras fast
innan enheten installeras eller underhålls på ställningen.
•
SRX100 Services Gateway Fire Safety Requirements on page 125
•
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on page 133
Copyright © 2016, Juniper Networks, Inc.
131
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
132
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 21
Laser and LED Safety Guidelines and
Warnings
•
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on page 133
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings
Observe the following guidelines and warnings when working around the SRX100 Services
Gateway:
•
Laser and LED Safety Guidelines and Warnings on page 133
Laser and LED Safety Guidelines and Warnings
General Laser Safety Guidelines
When working around devices, observe the following safety guidelines to prevent eye
injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Class 1 Laser Product Warning
WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Copyright © 2016, Juniper Networks, Inc.
133
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Attention Produit laser de classe I.
Warnung Laserprodukt der Klasse 1.
Avvertenza Prodotto laser di Classe 1.
Advarsel Laserprodukt av klasse 1.
Aviso Produto laser de classe 1.
¡Atención! Producto láser Clase I.
Varning! Laserprodukt av klass 1.
Class 1 LED Product Warning
WARNING: Class 1 LED product.
Waarschuwing Klasse 1 LED-product.
Varoitus Luokan 1 valodiodituote.
Attention Alarme de produit LED Class I.
Warnung Class 1 LED-Produktwarnung.
Avvertenza Avvertenza prodotto LED di Classe 1.
Advarsel LED-produkt i klasse 1.
Aviso Produto de classe 1 com LED.
¡Atención! Aviso sobre producto LED de Clase 1.
Varning! Lysdiodprodukt av klass 1.
Laser Beam Warning
WARNING: Do not stare into the laser beam or view it directly with optical
instruments.
Waarschuwing Niet in de straal staren of hem rechtstreeks bekijken met
optische instrumenten.
Varoitus Älä katso säteeseen äläkä tarkastele sitä suoraan optisen laitteen
avulla.
Attention Ne pas fixer le faisceau des yeux, ni l'observer directement à l'aide
d'instruments optiques.
134
Copyright © 2016, Juniper Networks, Inc.
Chapter 21: Laser and LED Safety Guidelines and Warnings
Warnung Nicht direkt in den Strahl blicken und ihn nicht direkt mit optischen
Geräten prüfen.
Avvertenza Non fissare il raggio con gli occhi né usare strumenti ottici per
osservarlo direttamente.
Advarsel Stirr eller se ikke direkte p strlen med optiske instrumenter.
Aviso Não olhe fixamente para o raio, nem olhe para ele directamente com
instrumentos ópticos.
¡Atención! No mirar fijamente el haz ni observarlo directamente con
instrumentos ópticos.
Varning! Rikta inte blicken in mot strålen och titta inte direkt på den genom
optiska instrument.
Radiation from Open Port Apertures Warning
WARNING: Because invisible radiation may be emitted from the aperture of
the port when no fiber cable is connected, avoid exposure to radiation and
do not stare into open apertures.
Waarschuwing Aangezien onzichtbare straling vanuit de opening van de
poort kan komen als er geen fiberkabel aangesloten is, dient blootstelling
aan straling en het kijken in open openingen vermeden te worden.
Varoitus Koska portin aukosta voi emittoitua näkymätöntä säteilyä, kun
kuitukaapelia ei ole kytkettynä, vältä säteilylle altistumista äläkä katso
avoimiin aukkoihin.
Attention Des radiations invisibles à l'il nu pouvant traverser l'ouverture du
port lorsqu'aucun câble en fibre optique n'y est connecté, il est recommandé
de ne pas regarder fixement l'intérieur de ces ouvertures.
Warnung Aus der Port-Öffnung können unsichtbare Strahlen emittieren,
wenn kein Glasfaserkabel angeschlossen ist. Vermeiden Sie es, sich den
Strahlungen auszusetzen, und starren Sie nicht in die Öffnungen!
Avvertenza Quando i cavi in fibra non sono inseriti, radiazioni invisibili possono
essere emesse attraverso l'apertura della porta. Evitate di esporvi alle
radiazioni e non guardate direttamente nelle aperture.
Advarsel Unngå utsettelse for stråling, og stirr ikke inn i åpninger som er åpne,
fordi usynlig stråling kan emiteres fra portens åpning når det ikke er tilkoblet
en fiberkabel.
Aviso Dada a possibilidade de emissão de radiação invisível através do orifício
da via de acesso, quando esta não tiver nenhum cabo de fibra conectado,
Copyright © 2016, Juniper Networks, Inc.
135
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
deverá evitar a exposição à radiação e não deverá olhar fixamente para
orifícios que se encontrarem a descoberto.
¡Atención! Debido a que la apertura del puerto puede emitir radiación invisible
cuando no existe un cable de fibra conectado, evite mirar directamente a las
aperturas para no exponerse a la radiación.
Varning! Osynlig strålning kan avges från en portöppning utan ansluten
fiberkabel och du bör därför undvika att bli utsatt för strålning genom att inte
stirra in i oskyddade öppningar.
Related
Documentation
136
•
SRX100 Services Gateway Installation Safety Guidelines and Warnings on page 127
•
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 137
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 22
Maintenance and Operational Safety
Guidelines and Warnings
•
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 137
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings
As you maintain the services gateway, observe the following guidelines and warnings:
•
Safety Guidelines and Warnings on page 137
Safety Guidelines and Warnings
Battery Handling Warning
WARNING: Replacing the battery incorrectly might result in an explosion.
Replace the battery only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen
wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat
door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig
fabrieksvoorschriften weggeworpen te worden.
Varoitus Räjähdyksen vaara, jos akku on vaihdettu väärään akkuun. Käytä
vaihtamiseen ainoastaan saman- tai vastaavantyyppistä akkua, joka on
valmistajan suosittelema. Hävitä käytetyt akut valmistajan ohjeiden mukaan.
Attention Danger d'explosion si la pile n'est pas remplacée correctement.
Ne la remplacer que par une pile de type semblable ou équivalent,
recommandée par le fabricant. Jeter les piles usagées conformément aux
instructions du fabricant.
Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr.
Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller
Copyright © 2016, Juniper Networks, Inc.
137
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den
Anweisungen des Herstellers.
Avvertenza Pericolo di esplosione se la batteria non è installata
correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata
dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore.
Advarsel Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte.
Skift kun med samme eller tilsvarende type som er anbefalt av produsenten.
Kasser brukte batterier i henhold til produsentens instruksjoner.
Aviso Existe perigo de explosão se a bateria for substituída incorrectamente.
Substitua a bateria por uma bateria igual ou de um tipo equivalente
recomendado pelo fabricante. Destrua as baterias usadas conforme as
instruções do fabricante.
¡Atención! Existe peligro de explosión si la batería se reemplaza de manera
incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el
equivalente recomendado por el fabricante. Desechar las baterías gastadas
según las instrucciones del fabricante.
Varning! Explosionsfara vid felaktigt batteribyte. Ersätt endast batteriet med
samma batterityp som rekommenderas av tillverkaren eller motsvarande.
Följ tillverkarens anvisningar vid kassering av använda batterier.
Jewelry Removal Warning
WARNING: Before working on equipment that is connected to power lines,
remove jewelry, including rings, necklaces, and watches. Metal objects heat
up when connected to power and ground and can cause serious burns or
weld the metal object to the terminals.
Waarschuwing Alvorens aan apparatuur te werken die met elektrische
leidingen is verbonden, sieraden (inclusief ringen, kettingen en horloges)
verwijderen. Metalen voorwerpen worden warm wanneer ze met stroom en
aarde zijn verbonden, en kunnen ernstige brandwonden veroorzaken of het
metalen voorwerp aan de aansluitklemmen lassen.
Varoitus Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden
parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien).
Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan
kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet
kiinni liitäntänapoihin.
Attention Avant d'accéder à cet équipement connecté aux lignes électriques,
ôter tout bijou (anneaux, colliers et montres compris). Lorsqu'ils sont branchés
à l'alimentation et reliés à la terre, les objets métalliques chauffent, ce qui
peut provoquer des blessures graves ou souder l'objet métallique aux bornes.
138
Copyright © 2016, Juniper Networks, Inc.
Chapter 22: Maintenance and Operational Safety Guidelines and Warnings
Warnung Vor der Arbeit an Geräten, die an das Netz angeschlossen sind,
jeglichen Schmuck (einschließlich Ringe, Ketten und Uhren) abnehmen.
Metallgegenstände erhitzen sich, wenn sie an das Netz und die Erde
angeschlossen werden, und können schwere Verbrennungen verursachen
oder an die Anschlußklemmen angeschweißt werden.
Avvertenza Prima di intervenire su apparecchiature collegate alle linee di
alimentazione, togliersi qualsiasi monile (inclusi anelli, collane, braccialetti
ed orologi). Gli oggetti metallici si riscaldano quando sono collegati tra punti
di alimentazione e massa: possono causare ustioni gravi oppure il metallo
può saldarsi ai terminali.
Advarsel Fjern alle smykker (inkludert ringer, halskjeder og klokker) før du
skal arbeide på utstyr som er koblet til kraftledninger. Metallgjenstander som
er koblet til kraftledninger og jord blir svært varme og kan forårsake alvorlige
brannskader eller smelte fast til polene.
Aviso Antes de trabalhar em equipamento que esteja ligado a linhas de
corrente, retire todas as jóias que estiver a usar (incluindo anéis, fios e
relógios). Os objectos metálicos aquecerão em contacto com a corrente e
em contacto com a ligação à terra, podendo causar queimaduras graves ou
ficarem soldados aos terminais.
¡Atención! Antes de operar sobre equipos conectados a líneas de
alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los
objetos de metal se calientan cuando se conectan a la alimentación y a tierra,
lo que puede ocasionar quemaduras graves o que los objetos metálicos
queden soldados a los bornes.
Varning! Tag av alla smycken (inklusive ringar, halsband och armbandsur)
innan du arbetar på utrustning som är kopplad till kraftledningar. Metallobjekt
hettas upp när de kopplas ihop med ström och jord och kan förorsaka
allvarliga brännskador; metallobjekt kan också sammansvetsas med
kontakterna.
Lightning Activity Warning
WARNING: Do not work on the system or connect or disconnect cables during
periods of lightning activity.
Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet
aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.
Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota
kaapeleita ukkosilmalla.
Attention Ne pas travailler sur le système ni brancher ou débrancher les
câbles pendant un orage.
Copyright © 2016, Juniper Networks, Inc.
139
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Warnung Arbeiten Sie nicht am System und schließen Sie keine Kabel an
bzw. trennen Sie keine ab, wenn es gewittert.
Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi
durante un temporale con fulmini.
Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet
når det tordner eller lyner.
Aviso Não trabalhe no sistema ou ligue e desligue cabos durante períodos
de mau tempo (trovoada).
¡Atención! No operar el sistema ni conectar o desconectar cables durante el
transcurso de descargas eléctricas en la atmósfera.
Varning! Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller
koppla loss kablar.
Operating Temperature Warning
WARNING: To prevent the services gateway from overheating, do not operate
it in an area that exceeds the maximum recommended ambient temperature
ο
ο
of 104 F (40 C). To prevent airflow restriction, allow at least 6 in. (15.2 cm)
of clearance around the ventilation openings.
Waarschuwing Om te voorkomen dat welke services gateway van de Juniper
Networks services gateway dan ook oververhit raakt, dient u deze niet te
bedienen op een plaats waar de maximale aanbevolen
ο
omgevingstemperatuur van 40 C wordt overschreden. Om te voorkomen
dat de luchtstroom wordt beperkt, dient er minstens 15,2 cm speling rond de
ventilatie-openingen te zijn.
Varoitus Ettei Juniper Networks services gateway-sarjan reititin ylikuumentuisi,
sitä ei saa käyttää tilassa, jonka lämpötila ylittää korkeimman suositellun
ο
ympäristölämpötilan 40 C. Ettei ilmanvaihto estyisi, tuuletusaukkojen
ympärille on jätettävä ainakin 15,2 cm tilaa.
Attention Pour éviter toute surchauffe des routeurs de la gamme Juniper
Networks services gateway, ne l'utilisez pas dans une zone où la température
ο
ambiante est supérieure à 40 C. Pour permettre un flot d'air constant, dégagez
un espace d'au moins 15,2 cm autour des ouvertures de ventilations.
Warnung Um einen services gateway der services gateway vor Überhitzung
zu schützen, darf dieser nicht in einer Gegend betrieben werden, in der die
ο
Umgebungstemperatur das empfohlene Maximum von 40 C überschreitet.
Um Lüftungsverschluß zu verhindern, achten Sie darauf, daß mindestens
15,2 cm lichter Raum um die Lüftungsöffnungen herum frei bleibt.
140
Copyright © 2016, Juniper Networks, Inc.
Chapter 22: Maintenance and Operational Safety Guidelines and Warnings
Avvertenza Per evitare il surriscaldamento dei services gateway, non
adoperateli in un locale che ecceda la temperatura ambientale massima di
ο
40 C. Per evitare che la circolazione dell'aria sia impedita, lasciate uno spazio
di almeno 15.2 cm di fronte alle aperture delle ventole.
Advarsel Unngå overoppheting av eventuelle rutere i Juniper Networks
services gateway Disse skal ikke brukes på steder der den anbefalte
ο
ο
maksimale omgivelsestemperaturen overstiger 40 C (104 F). Sørg for at
klaringen rundt lufteåpningene er minst 15,2 cm (6 tommer) for å forhindre
nedsatt luftsirkulasjon.
Aviso Para evitar o sobreaquecimento do encaminhador Juniper Networks
services gateway, não utilize este equipamento numa área que exceda a
ο
temperatura máxima recomendada de 40 C. Para evitar a restrição à
circulação de ar, deixe pelo menos um espaço de 15,2 cm à volta das aberturas
de ventilação.
¡Atención! Para impedir que un encaminador de la serie Juniper Networks
services gateway se recaliente, no lo haga funcionar en un área en la que se
ο
supere la temperatura ambiente máxima recomendada de 40 C. Para impedir
la restricción de la entrada de aire, deje un espacio mínimo de 15,2 cm
alrededor de las aperturas para ventilación.
Varning! Förhindra att en Juniper Networks services gateway överhettas
genom att inte använda den i ett område där den maximalt rekommenderade
ο
omgivningstemperaturen på 40 C överskrids. Förhindra att luftcirkulationen
inskränks genom att se till att det finns fritt utrymme på minst 15,2 cm omkring
ventilationsöppningarna.
Product Disposal Warning
WARNING: Disposal of this product must be handled according to all national
laws and regulations.
Waarschuwing Dit produkt dient volgens alle landelijke wetten en
voorschriften te worden afgedankt.
Varoitus Tämän tuotteen lopullisesta hävittämisestä tulee huolehtia kaikkia
valtakunnallisia lakeja ja säännöksiä noudattaen.
Attention La mise au rebut définitive de ce produit doit être effectuée
conformément à toutes les lois et réglementations en vigueur.
Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften
entsprechend entsorgt werden.
Avvertenza L'eliminazione finale di questo prodotto deve essere eseguita
osservando le normative italiane vigenti in materia
Copyright © 2016, Juniper Networks, Inc.
141
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale
lover og forskrifter.
Aviso A descartagem final deste produto deverá ser efectuada de acordo
com os regulamentos e a legislação nacional.
¡Atención! El desecho final de este producto debe realizarse según todas las
leyes y regulaciones nacionales
Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets
alla lagar och föreskrifter.
Related
Documentation
142
•
SRX100 Services Gateway Laser and LED Safety Guidelines and Warnings on page 133
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 23
Electrical Safety Guidelines and Warnings
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
SRX100 Services Gateway Electrical Safety Guidelines and Warnings
When working on equipment powered by electricity, follow the guidelines described in
the following topics:
•
Electrical Safety Guidelines and Warnings on page 143
Electrical Safety Guidelines and Warnings
In Case of Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
1.
2. Disconnect power from the services gateway.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
General Electrical Safety Guidelines and Warnings
•
Install the services gateway in compliance with the following local, national, or
international electrical codes:
•
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code
•
Canada—Canadian Electrical Code, Part 1, CSA C22.1
•
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7
•
Evaluated to the TN power system
•
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
•
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
Copyright © 2016, Juniper Networks, Inc.
143
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
Related
Documentation
144
•
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
•
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
•
Operate the services gateway within marked electrical ratings and product usage
instructions.
•
For the services gateway and peripheral equipment to function safely and correctly,
use the cables and connectors specified for the attached peripheral equipment, and
make certain they are in good condition.
•
SRX100 Services Gateway Electrical and Power Requirements on page 30
•
SRX100 Services Gateway Maintenance and Operational Safety Guidelines and
Warnings on page 137
•
SRX100 Services Gateway Agency Approvals on page 145
•
Grounding the SRX100 Services Gateway on page 57
Copyright © 2016, Juniper Networks, Inc.
CHAPTER 24
Agency Approvals and Regulatory
Compliance Information
•
SRX100 Services Gateway Agency Approvals on page 145
•
SRX100 Services Gateway Compliance Statements for EMC Requirements on page 146
•
SRX100 Services Gateway Compliance Statements for Environmental
Requirements on page 148
SRX100 Services Gateway Agency Approvals
The services gateway complies with the following standards:
•
•
Safety
•
CSA 60950-1 (2003) Safety of Information Technology Equipment
•
UL 60950-1 (2003) Safety of Information Technology Equipment
•
EN 60950-1 (2001) Safety of Information Technology Equipment
•
IEC 60950-1 (2001) Safety of Information Technology Equipment (with country
deviations)
•
EN 60825-1 +A1+A2 (1994) Safety of Laser Products - Part 1: Equipment Classification
•
EN 60825-2 (2000) Safety of Laser Products - Part 2: Safety of Optical Fiber Comm.
Systems
EMC
•
•
EN 300 386 V1.3.3 (2005) Telecom Network Equipment - EMC requirements
EMI
•
FCC Part 15 Class B (2007) USA Radiated Emissions
•
EN 55022 Class B (2006) European Radiated Emissions
•
VCCI Class B (2007) Japanese Radiated Emissions
Copyright © 2016, Juniper Networks, Inc.
145
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
Related
Documentation
Immunity
•
EN 55024 +A1+A2 (1998) Information Technology Equipment Immunity
Characteristics
•
EN-61000-3-2 (2006) Power Line Harmonics
•
EN-61000-3-3 +A1 +A2 +A3 (1995) Power Line Voltage Fluctuations
•
EN-61000-4-2 +A1 +A2 (1995) Electrostatic Discharge
•
EN-61000-4-3 +A1+A2 (2002) Radiated Immunity
•
EN-61000-4-4 (2004) Electrical Fast Transients
•
EN-61000-4-5 (2006) Surge
•
EN-61000-4-6 (2007) Immunity to Conducted Disturbances
•
EN-61000-4-11 (2004) Voltage Dips and Sags
•
SRX100 Services Gateway Electrical Safety Guidelines and Warnings on page 143
•
SRX100 Services Gateway Compliance Statements for EMC Requirements on page 146
•
SRX100 Services Gateway Compliance Statements for Environmental Requirements
on page 148
SRX100 Services Gateway Compliance Statements for EMC Requirements
This topic includes the following sections:
•
Canada on page 146
•
European Community on page 146
•
Japan on page 147
•
Korean on page 147
•
United States on page 147
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Community
This is a Class B product.
146
Copyright © 2016, Juniper Networks, Inc.
Chapter 24: Agency Approvals and Regulatory Compliance Information
Japan
The preceding translates as follows:
This is a Class B product based on the standard of the Voluntary Control Council for
Interference by Information Technology Equipment (VCCI). If this product is used near
a radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
Korean
Korean Class B Warning
g040914
This is a Class B product.
United States
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Related
Documentation
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
SRX100 Services Gateway Agency Approvals on page 145
Copyright © 2016, Juniper Networks, Inc.
147
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
•
SRX100 Services Gateway Compliance Statements for Environmental Requirements
on page 148
SRX100 Services Gateway Compliance Statements for Environmental Requirements
This topic includes the compliance statement for the following environmental
requirement:
Lithium Battery
Batteries in this product are not based on mercury, lead, or cadmium substances. The
batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC,
and 98/101/EEC. The product documentation includes instructional information about
the proper method of reclamation and recycling.
Related
Documentation
148
•
SRX100 Services Gateway Compliance Statements for EMC Requirements on page 146
•
SRX100 Services Gateway Agency Approvals on page 145
Copyright © 2016, Juniper Networks, Inc.
PART 7
Index
•
Index on page 151
Copyright © 2016, Juniper Networks, Inc.
149
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
150
Copyright © 2016, Juniper Networks, Inc.
C
Index
Symbols
#, comments in configuration statements....................xv
( ), in syntax descriptions.....................................................xv
< >, in syntax descriptions....................................................xv
[ ], in configuration statements.........................................xv
{ }, in configuration statements.........................................xv
| (pipe), in syntax descriptions...........................................xv
A
accessory list............................................................................44
adapter, console port
chassis.........................................................................63, 75
agency approvals..................................................................145
Alarm LED....................................................................................8
monitoring........................................................................99
altitude, acceptable range...................................................24
approvals, agency.................................................................145
AT modem command...................................................62, 63
AT&D1 modem command...................................................62
AT&K0 modem command..................................................62
AT&W modem command...................................................62
ATDT modem command.....................................................63
ATS0=1 modem command.................................................62
autoinstallation
overview.............................................................................42
use of built-in Ethernet ports....................................70
B
basic connectivity
secure Web access........................................................74
boot media
monitoring........................................................................101
braces, in configuration statements.................................xv
brackets
angle, in syntax descriptions......................................xv
square, in configuration statements........................xv
branch SRX
factory default
configuration............................................................77
cables
console port cable (chassis),
connecting.............................................................63, 75
Ethernet cable, connecting..........................63, 73, 75
CAT-5e........................................................................................33
chassis alarms
sample...............................................................................101
clearance requirements.......................................................28
CLI
configuring services gateway with..........................83
show commands............................................................97
comments, in configuration statements........................xv
compliance
EMC requirements.......................................................146
Environmental requirements...................................148
general standards........................................................145
component
return procedure ...........................................................110
components, packing for shipment................................112
configuration
factory default.................................................................70
use of built-in Ethernet ports....................................70
using the CLI....................................................................83
connecting to
setup wizard.....................................................................73
connectivity
modem (remote) connection...................................75
through the CLI locally..................................................75
through the CLI remotely.............................................75
console port
adapter (chassis)....................................................63, 75
cable specifications.......................................................33
connecting through the CLI locally..........................75
connecting through the CLI remotely.....................75
settings for local CLI connection..............................75
settings for modem connection at device for
remote CLI access.....................................................62
settings for modem connection for remote CLI
access............................................................................63
console port, RJ-45................................................................34
conventions
text and syntax...............................................................xiv
curly braces, in configuration statements......................xv
customer support...................................................................xvi
contacting JTAC..............................................................xvi
D
DB-9 to DB-25 serial port adapter...................................63
Copyright © 2016, Juniper Networks, Inc.
151
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
default
built-in Ethernet interface configuration...............70
security policy configuration......................................70
security zone configuration........................................70
desk
installing services gateway on...................................52
desk installation
preparing...........................................................................48
desk mount
preparing...........................................................................48
device grounding.....................................................................57
dial-up modem connection See modem connection
to console port
documentation
comments on...................................................................xv
E
electricity
safety warnings.............................................................143
electromagnetic compatibility..........................................29
electrostatic discharge damage......................................122
EMC (EMI)
compliance with requirements...............................146
standards........................................................................145
encrypted access
through HTTPS...............................................................74
through SSH.....................................................................72
through SSL......................................................................74
environmental specifications.............................................24
Ethernet cable
connecting the services gateway to a
management device..........................................73, 75
connecting the services gateway to a
modem..........................................................................63
Ethernet port
autoinstallation ..............................................................70
cable specifications.......................................................33
chassis cluster.................................................................70
factory default configuration.....................................70
initial configuration........................................................70
RJ-45...................................................................................34
F
factory default configuration..............................................70
factory-default configuration...........................................104
fire safety specifications.....................................................125
font conventions.....................................................................xiv
152
G
grounding...................................................................................65
guidelines
electrical..........................................................................143
electrical wiring...............................................................29
installing............................................................................24
H
HA LED..........................................................................................8
hardware components
maintenance...................................................................95
monitoring........................................................................101
Hayes-compatible modem See modem connection
to console port
HTTP (Hypertext Transfer Protocol)
on built-in management interfaces.........................74
HTTPS (Hypertext Transfer Protocol over SSL)
recommended for secure access.............................74
HyperTerminal, for terminal emulation
local CLI connection......................................................75
modem connection at device for remote CLI
access............................................................................62
modem connection for remote CLI access..........63
I
immunity standards.............................................................145
installation
guidelines..........................................................................24
safety guidelines...........................................................123
safety requirements.....................................................123
safety warnings.............................................................123
installation parts......................................................................41
installation site
electrical wiring guidelines.........................................29
installation tools......................................................................41
interface alarms......................................................................101
interface cable
specifications...................................................................33
interface cables
connecting.........................................................................61
organizing...........................................................................61
interfaces
built-in.................................................................................15
hardware............................................................................15
J
JTAC...........................................................................................109
information required....................................................110
requesting support.......................................................110
Copyright © 2016, Juniper Networks, Inc.
Index
Juniper Networks Technical Assistance Center See
JTAC
JUNOS CLI
connecting locally..........................................................75
connecting remotely.....................................................75
Junos OS
establishing secure Web access...............................74
L
laptop See management device
laser safety guidelines.........................................................133
LEDs
front panel......................................................................7, 11
safety warnings.............................................................133
LINK LED.....................................................................................10
listing
services gateway serial number................................111
lithium battery........................................................................148
local connection to the console port...............................75
locating
agency labels...................................................................111
serial number...................................................................111
M
maintenance guidelines
warnings...........................................................................137
management device
connecting to setup wizard........................................73
manuals
comments on...................................................................xv
modem commands
at device end....................................................................62
at remote end..................................................................63
modem connection to console port
configuring modem at services gateway
end..................................................................................62
configuring modem at user end...............................63
connecting modem to device...................................63
overview.............................................................................75
N
NEBS standards....................................................................145
network
traditional private network............................................3
P
parentheses, in syntax descriptions.................................xv
parts list......................................................................................44
PC See management device
Copyright © 2016, Juniper Networks, Inc.
pinouts
RJ-45............................................................................33, 34
Port LED
LINK.......................................................................................9
port settings..............................................................................62
power
shutdown...........................................................................67
Power LED....................................................................................8
monitoring........................................................................99
status................................................................................103
power supply
connecting........................................................................65
maintenance...................................................................95
power system
monitoring.......................................................................103
requirements.....................................................................31
specifications ...................................................................31
R
rack
installing services gateway on...................................51
rack installation
preparing............................................................................47
rack mount
rack mount installation preparing............................47
radio frequency interference..............................................29
remote connection to console port
configuring modem at services gateway
end..................................................................................62
configuring modem at user end...............................63
connecting modem to device...................................63
overview.............................................................................75
requirements
airflow clearance............................................................27
cabinet airflow.................................................................25
cabinet size.......................................................................25
electrical............................................................................30
geographical area..........................................................26
hardware maintenance................................................27
power..................................................................................30
rack size.............................................................................26
rack strength....................................................................26
spacing mounting brackets........................................26
rescue configuration............................................................104
Reset Config button
CLI commands..............................................................105
set chassis commands..............................................105
using..................................................................................104
153
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
return
component......................................................................110
services gateway...........................................................110
returning components..........................................................112
returning services gateway.................................................112
RJ-45 pinouts
console port.....................................................................34
fast Ethernet port...........................................................33
RJ-45 to DB-9 serial port adapter
chassis console port.....................................................63
root password
at initial local connection (none).............................75
at initial remote connection (none).......................63
RS-232 (EIA-232) ..................................................................33
S
safety guidelines
general...............................................................................119
installation.......................................................................127
laser....................................................................................133
LED.....................................................................................133
safety standards....................................................................145
safety warning levels
definition...........................................................................117
safety warnings
general...............................................................................119
installation.......................................................................127
laser....................................................................................133
maintenance and operational.................................137
secure access
CLI requirements.............................................................72
HTTPS recommended.................................................74
overview.............................................................................74
Telnet versus SSH..........................................................72
Web requirements..........................................................74
Secure Sockets Layer See SSL
services gateway
autoinstallation...............................................................42
back panel.........................................................................13
chassis alarms................................................................101
components......................................................................13
description...........................................................................3
desk installation.............................................................52
establishing secure Web access...............................74
factory default configuration.....................................70
front panel.........................................................................13
grounding...........................................................................57
hardware interfaces.......................................................15
HTTPS Web access.......................................................74
154
installation overview....................................................40
installation process......................................................40
LEDs..................................................................................7, 11
monitoring component LEDs....................................99
parts.....................................................................................41
power supply............................................................10, 66
powering off.....................................................................67
powering on.....................................................................66
rack installation...............................................................51
return procedure ...........................................................110
SSH access.......................................................................72
SSL access........................................................................74
tools.....................................................................................41
unpacking..........................................................................43
use..........................................................................................3
verifying parts..................................................................44
wall installation..............................................................54
Services Gateway
configuration...................................................................69
services gateway features
High Memory......................................................................4
Low Memory.......................................................................4
services gateway, packing for shipment........................112
setup wizard
connecting........................................................................73
show chassis commands
show chassis alarms.....................................................97
show chassis environment.........................................97
show chassis fpc............................................................97
show chassis hardware................................................97
shutdown
forced..................................................................................67
graceful..............................................................................67
signaling limitations...............................................................29
site
environmental specifications....................................24
specifications
cable....................................................................................33
environmental.................................................................24
fire safety.........................................................................125
SSL (Secure Sockets Layer)
management access....................................................74
standards compliance........................................................145
Status LED...................................................................................8
monitoring........................................................................99
support, requesting from JTAC........................................109
support, technical See technical support
syntax conventions................................................................xiv
Copyright © 2016, Juniper Networks, Inc.
Index
T
technical support
contacting JTAC..............................................................xvi
temperature, acceptable range.........................................24
temperature, nonoperating range....................................24
thermal output.........................................................................24
W
wall
installing services gateway on..................................54
wall installation
preparing...........................................................................48
wall mount
preparing...........................................................................48
warnings
electrical..........................................................................143
general...............................................................................119
installation.......................................................................127
laser and LED.................................................................133
maintenance and operational.................................137
wire specifications..................................................................33
Copyright © 2016, Juniper Networks, Inc.
155
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
156
Copyright © 2016, Juniper Networks, Inc.