Bluetooth 4.0
Cycling Computer
User Manual
Cyclaid 10
LAP
w w w . a l a t e c h . c o m
T
Thank You
Thank you for purchasing
Cyclaid 10, Bluetooth
Cycling Computer !
Your Cycling Computer employs low power Bluetooth 4.0
technology for you to exercise together with mobile devices or
sensor accessories.
It helps a lot in your daily exercise training program.
About this manual
•Please read this manual
carefully before using this product for its correct and
effective use.
•Icons you may find in this manual:
Notes.
Tips and remarks.
Appendix
For other information and battery replacement, please
refer to appendix.
•Please download and view the latest release of this manual at www.alatech.com.
Items included with your product
•Cyclaid 10 Bluetooth 4.0 Cycling Computer
•Accessories: Holder, Fixing Pad, Cable Ties and CR2032 button battery
•Quick Start Guide
•Warranty Card
Trademark
•Bluetooth® is the registered trademark of Bluetooth SIG, Inc.
•Apple, Mac OS,iPhone, iPad, Multi-Touch are trademarks of Apple Inc.
•"HTC ONE" is a registered trademark of HTC Corporation.
•Android is a trademark of Google Inc.
2
Cyclaid 10, Bluetooth Cycling Computer
Table of Contents
1 Getting to Know Your Cyclaid 10
1-1 Applications
4
1-2 Keys
6
1-3 Screen overview
7
1-4 Switch the function mode
8
Function modes
4
9
2 Pairing with Sensor
10
2-1 Pair with your HRM
10
2-2 Pair with your Speed & Cadence Sensor
11
3 Basic Setup
12
3-1 System setup
12
Tire circumference (L) cross reference table
13
3-2 User setup
14
3-3 Hot Key setup
15
3-4 Sensor setup
15
4 Install the Cycling Computer
5 Exercise Mode
16
17
Training program cross reference table
18
Instant exercise screen
19
6 Log Function
20
6-1 Browse and delete file
20
6-2 Upload file
21
7 Exercise Statistics
8 Connect to Smartphone or Mobile Device
22
23
8-1 Install App and enable the Bluetooth function
23
8-2 Pair your Cycling Computer with mobile device
24
8-3 Smartphone exercise sync.
25
8-4 Synchronize with smartphone
26
S Specifications
A Appendix
C
28
29
User Manual
3
1
Getting to Know Your Cyclaid 10
1-1 Applications
Please refer to the following application and operation index to
know more about using your Cyclaid 10.
Use with sensor alone:
Your Cycling Computer may connect to two sensors with low power Bluetooth 4.0
technologyNote 1 at the same time.
Bluetooth 4.0 Heart Rate Strap
Cyclaid 10 Cycling
Computer
Bluetoot 4.0 Speed
Bluetooth
& Cadence Sensor
Bicycling with your smartphone:
Bicycling with your smartphone or mobile devices connected with low power
Bluetooth 4.0 technologyNote 2.
Bluetooth 4.0 Heart Rate Strap
Bluetoot 4.0 Speed
Bluetooth
& Cadence Sensor
Smart Mobile Devices
Cyclaid 10 Cycling
Computer
•Note 1: Compatible with ALATECH Heart Rate Strap (model CS009/CS010/CS011/CS012)
ALATECH Speed & Cadence Sensor (model SC001BLE/SC002)
•Note 2: Compatible with any device running iOS 5.0 or Android 4.3 or later and featuring
Bluetooth 4.0 (require installation of App: ALA COACH+).
•For more information on compatible mobile devices and supported accessories, please refer to
page 23 or browse web site at www.alatech.com.
4
Cyclaid 10, Bluetooth Cycling Computer
Getting to Know Your Cyclaid 10
1-1 Applications
1
Application cross reference table:
Exercise readings
Application
Recording method
Slope and
Heartbeat Calories Distance Speed Cadence
height
Bicycling together with
your smartphone
Mobile
phone
GPS
Mobile
phone
GPS
Track
Mobile
phone
GPS
Mobile
phone
GPS
Mobile
phone
GPS
Mobile
phone
GPS
Mobile
phone
GPS
Mobile
phone
GPS
Diagram Summary
Use with sensor alone
Cycling
Computer
Cycling
Computer
Cycling
Computer
Operation index:
Use with sensors
Setup Hot Key
Page 15
Setup sensor
Pair with sensor
Page 15
Page 10-11
System setup
Page 12-15
Install the
Cycling Computer
Start bicycling
Browse records
Page 16
Page 17-19
Page 20-22
Bicycling with your smartphone
Install
App
Setup
Hot Key
Pair with
mobile device
Page 23
Page 15
Page 24
Pair with
sensor
Sync.
Install the
Sync.
setup Cycling Computer bicycling
Please refer to
Page 26-27
operation manual
included with your
sensors
Page 16
Page 25
•Please pair the optional sensor device with your cycling computer before its first use.
(Page 10-11)
•Please complete the following pairing before using it together with smartphone for the first time:
1.Pair the Cycling Computer with your smartphone or mobile device. (Page 24)
2.Pair the optional sensor with your smartphone or mobile device.
User Manual
5
1
Getting to Know Your Cyclaid 10
1-2 Keys
•OK
•In the standby mode,
this may be the:
Exercise Hot Key or
Smartphone Hot Key
•Start bicycling
•Turn backlight
•Exit/Back
•Stop bicycling
•Right/Down arrow key
•Press and hold the
/ /
keys until the screen fully display to reset the Cycling Computer.
•Do the basic setups described in page 12-15 after Cycling Computer reset. If you have setup
Cycling Computer with the ALA COACH+ App, you may re-sync settings to your Cycling
Computer as described in "Phone sync" on page 26-27.
6
Cyclaid 10, Bluetooth Cycling Computer
Getting to Know Your Cyclaid 10
1
1-3 Screen Overview
Current time
Status bar
Speed display
Pedaling frequency display
Heartbeat display
Information display
Symbol
Name
Symbol
Connection to Mobile
Phone
Connection to Sensor
Name
Target Achievement Trophy
SPD
Speed
Battery 100% to 70%
Indicator
Heartbeat
Battery 70% to 40%
Indicator
Pedaling Frequency
Replace Battery Indicator
AVG
Average
Upload File
MAX
Maximum
AM
MPH
Speed in Imperial UOM
PM
KPH
Speed in metric UOM
•Screen of the Cycling Computer sleeps when the latter being in standby mode.
•The screen displays symbol of currently active mode or the one you are about to enter into.
User Manual
7
1
Getting to Know Your Cyclaid 10
1-4 Switch the Function Mode
LANGUAGE
ENGLISH
When using your product for the first time, press
to turn on
Cyclaid 10 and select to English, Deutsch, Français, Español, Italiano,
PortuguêsNote 1. After completing the language selected at the first
time, press to exit to standby mode, and then please refer to below
instructions for use this product.
to enter the bicycling
1.In standby mode, press
modeNote 2.
to switch the screen
2.In standby mode, press
to individual windowNote 3.
to enter.
3.In the selected window, press
to switch flashing setup item or page,
4.Press
press
to change settings.
Bicycling Mode
5.Press 2~3 times in any window to exit to
standby mode.
TRAINING
PROG.
--------
MEMORY
FILE
- -------
HOT KEY
SET
-- ------
SENSOR
SET
--- -----
PHONE
SYNC
---- ----
Workout Program
Selection
Log Function
Hot Key Setup
Sensor Setup
Synchronize with
Smartphone
EXERCISE
STAT.
--------
SYSTEM
SET
------- -
USER
SET
------ --
PAIRING
SENSOR
----- ---
Exercise Statistics
Bike Settings
User Settings
Pair with Sensor
•Note 1: If you have already setup the Language Settings once, you
can change it by going to SYSTEM SET > LANGUAGE.
•Note 2: In standby mode, press
to switch to bicycling mode (refer
to page 15 Hot Key setup) and the screen will start the
timer until the sensor and/or mobile connection is ready (the
or appears on the status bar).
•Note 3: Press
mode.
to switch to individual setup window in standby
Standby mode
8
Cyclaid 10, Bluetooth Cycling Computer
Getting to Know Your Cyclaid 10
1-4 Switch the Function Mode
1
Function modes:
Function modes
Description
TRAINING
PROG.
--------
1.Your Cycling Computer comes with low, moderate, and
high exercise intensity and customizable training programs
including: target heart rate zone and target time, distance,
and calories. (Page 17-18)
2.Execute training program and view instant exercise
information. (Page 17 and 19)
MEMORY
FILE
- -------
1.You can keep up to 7 records.
2.Browse and delete file. (Page 20)
3.Upload file. (Page 21)
HOT KEY
SET
-- ------
Switch between hotkeys. (Page 15)
SENSOR
SET
--- -----
Sensor setup. (Page 15)
PHONE
SYNC
---- ----
Sync. with Smartphone. (Page 26-27)
PAIRING
SENSOR
----- ---
1.Pair with Your HRM. (Page 10)
2.Pair with Your Speed and Cadence Sensor. (Page 11)
USER
SET
------ ---
Setup personal data. (Page 14)
SYSTEM
SET
------- -
Setup tire circumference (L), enable auto lap counting and
setup single lap distance, enable backlight, setup date/ time,
and change language. (Page 12-13)
EXERCISE
STAT.
--------
View total exercise amount including accumulated exercise
time, distance and energy burnt. (Page 22)
User Manual
9
2
Pairing with Sensor
2-1 Pair with Your HRM
1.In standby mode, press
to point to PAIRING SENSOR, press
to enter.
2.In the PAIRING HRM window, press
to create Bluetooth connection and start
pairing.
3.Paired successfully, message OK prompts, press
Pairing failed, message NO-DEV prompts, press
starts from STEP 2 again.
PAIRING
SENSOR
----- ---
to exit.
to exit to PAIRING HRM and
PAIRING
HRM
PAIRING
HRM
PAIRING
HRM
OK
PAIRING
HRM
NO-DEV
Pair your HRM
Please refer to the Heart Rate Strap manual on
wearing it properly, or press and hold the metal
button at the back of the heart rate sensor (HRM) with
both hands until the "OK" message prompts in your
Cycling Computer.
•Make sure HRM is set to ON in the Sensor Setup window. (Page 15)
•Keep your heart rate sensor and Cycling Computer within 10cm from each other. Keep both
away from other Bluetooth devices to prevent incorrect pairing.
10
Cyclaid 10, Bluetooth Cycling Computer
Pairing with Sensor
2-2 Pair with Your Speed & Cadence Sensor
2
1.In standby mode, press
to point to PAIRING SENSOR, press
to enter.
2.Press
to point to PAIRING SPD/CAD, press
to create Bluetooth connection
and start pairing.
3.Paired successfully, message OK prompts, press
Pairing failed, message NO-DEV prompts, press
and starts from STEP 2 again.
to exit.
to exit to PAIRING SPD/CAD
PAIRING
SENSOR
----- ---
PAIRING
HRM
PAIRING
SPD/CAD
PAIRING
SPD/CAD
OK
PAIRING
SPD/CAD
Pair your Speed &
Cadence Sensor
Please refer to the Speed & Cadence Sensor manual
to install the sensor and its included magnet to your
bike, turn the crank counterclockwise until the sensor
is connected to the Cycling Computer and the "OK"
message prompts.
PAIRING
SPD/CAD
NO-DEV
•Make sure SPD/CAD is set to ON in the Sensor Setup window. (Page 15)
•Activate your Speed & Cadence Sensor before pairing by cranking to start the sensor and
establish connection. Your Speed & Cadence Sensor remains awake for one minute. It goes
back to sleep mode again if no Bluetooth connection is enabled.
•Keep your Speed & Cadence Sensor and Cycling Computer close to each other and away from
other Bluetooth devices for correct pairing.
User Manual
11
3
Basic Setup
3-1 System Setup
Please setup your basic data before using your product.
You may setup your basic data with the ALA COAH+ App on
your mobile phone or devices and synchronized it to your
Cycling Computer.
See Page 26-27 for its operation.
3-1 System setup
1.In standby mode, press
to point to SYSTEM SET,
Press
to enter.
2.Press
to point to the next setup item or page.
to change settings.
3.Press
4.Press
to exit after setup is completed.
SYSTEM
SET
------- -
12
WHEEL
1900mm
AUTO LAP
OFF
LAP DST
1 KM
LIGHT
OFF
Tire Circumference(L)
Auto Lap
Single Lap Distance
Back Light
LANGUAGE
ENGLISH
TIME
12:38
24H
DAY
01
MONTH
01
YEAR
2014
Language Settings
Time
12-24 Hours
Day
Month
Last two digits of year of
the Gregorian calendar
Cyclaid 10, Bluetooth Cycling Computer
Basic Setup
3-1 System Setup
Tire size:
ETRTO
47-305
47-406
47-507
-559) 26×1.50
(40
You can find the tire size indicated at both
sides of your wheel. For your reference, use
the tire circumference (L) chart below.
Tire size
L(mm)
ETRTO
Tire size
L(mm)
12×1.75
935
23-571
26×1(59)
1913
650×20C
1938
14×1.50
1020
26×1(65)
1952
650×23C
1944
14×1.75
1055
26×1.25
1953
650×35A
2090
16×1.50
1185
26×1-1/8
1970
650×38A
2125
16×1.75
1195
26×1-3/8
2068
650×38B
2105
18×1.50
1340
26×1-1/2
2100
700×18C
2070
18×1.75
1350
26×1.40
2005
700×19C
2080
37-590
ETRTO
18-622
Tire size
L(mm)
20×1.75
1515
40-559
26×1.50
2010
20-622
700×20C
2086
20×1-3/8
1615
47-559
26×1.75
2023
23-622
700×23C
2096
22×1-3/8
1770
50-559
26×1.95
2050
25-622
700×25C
2105
22×1-1/2
1785
54-559
28-622
24×1
1753
24×3.4
Tubular
1785
24×1-1/8
1795
24×1-1/4
1905
57-559
57-559
26×2.00
2055
26×2.10
2068
700×28C
2136
700×30C
2146
26×2.125
2070
700×32C
2155
26×2.35
26×3.00
2083
700C Tubular
2130
2170
700×35C
2168
700×38C
2180
24×1.75
1890
27×1
2145
24×2.00
1925
27×1-1/8
2155
24×2.125
1965
27×1-1/4
26×7/8
1920
27×1-3/8
32-630
4
32-622
40-522
700×40C
2200
2161
29×2.1
2288
2169
29×2.3
2326
Language Settings reference table:
Options
Languages
Options
Languages
English
English
Español
Spanish
Deutsch
German
Italiano
Italian
Français
French
Português
Portuguese
• Tire size setup range:
1900mm
10-25
1900mm
00-99
• Single lap distance setup range: 1-5 kilometers.
1-5 miles.
•You may turn on the backlight for 5 seconds by pressing the
is selected.
key after the backlight option
•The back light may be too dim to be noticed under direct sun light.
User Manual
13
3
Basic Setup
3-2 User Setup
1.In standby mode, press
to point to USER SET,
Press
to enter.
2.Press
to change setup page.
3.Press
to change settings.
4.Press
UNIT
CM / KG
to exit after setup is completed.
GENDER
MALE
AGE
30
HR ALERT
OFF
HR MAX
190
HEIGHT
175CM
WEIGHT
70KG
Setup page:
Setup page
Description
UNIT
•UOM option: metric CM / KG or Imperial FT / LB
(Unit of measure)
GENDER
AGE
•MALE or FEMALE
•Setup range: 10-99 year-old
HEIGHT
•Setup range: 120-230 cm (3' 11" ~ 7' 5")
WEIGHT
•Setup range: 30-150 KG (67-330LB)
HR MAX
•Setup range: 130-220 bpm
(Maximum heart rate)
HR ALERT NOTE 1
•ON or OFF
•Please enter your age, gender, height and weight accurately as these may determine the
accuracy in calculating your target training heartbeat and burnt calories range.
•The maximum heart rate is derived from the "Age Formula: 220 - Age" formual automatically.
It is highly recommended to change these settings only with more accurate values arrived with
physicians and professional lab monitoring.
•Note 1:If you are above your target heart rate zone limits, the heart rate value starts flashing.
14
Cyclaid 10, Bluetooth Cycling Computer
Basic Setup
3-3 Hot Key Setup, 3-4 Sensor Setup
3
3-3 Hot Key Setup
1.In standby mode, press
to point to HOT KEY SET,
Press
to enter.
2.Press
to switch between hotkeys:
CONNECT PHONE (Smartphone Hot Key) or
CONNECT SENSOR (Exercise Hot Key).
3.Press
CONNECT
SENSOR
to exit after setup is completed.
CONNECT
PHONE
Smartphone Hot Key
Exercise Hot Key
• Press
to enter Phone Sync. Bicycling in standby mode
directly once the Hot Key is set to CONNECT PHONE. (Page 25)
• Press
to enter Bicycling Training in standby mode directly
once the Hot Key is set to CONNECT SENSOR. (Page17-19)
3-4 Sensor Setup
1.In standby mode, press
to point to SENSOR SET,
press
to enter.
to switch between HRM or SPD/CAD setup
2.Press
screen.
to select ON (connect) or OFF (disconnect).
3.Press
4.Press
HRM
ON
to exit after setup is completed.
SPD/CAD
ON
Connection with Speed &
Cadence Sensor
Connection with
Heart Rate Strap
•Your Cycling Computer can connect to two Bluetooth 4.0
sensors (Heart Rate Strap and Speed & Cadence Sensor) at
one time.
•Please only connect sensors required by specific exercises to
save time in search for Bluetooth connections.
User Manual
15
4
Install the Cycling Computer
Accessories included with your product:
Holder
Fixing pad
Cable Ties
CR2032 button battery
(Please refer to page 30
for battery installation.)
Installation method:
Stem
16
Handlebar
Cyclaid 10, Bluetooth Cycling Computer
5
Exercise Mode
TRAINING
PROG.
--------
1.In standby mode, press
to point to TRAINING
PROG., press
to enter.
2.Press
to switch between training programs.
3.When pointed to training target area for manual
setup (e.g. the green labeled area), press
to point
to change settings.
to flashing setup item, press
(See cross reference in page 18)
to start bicycling.
4.After setup, press
to view instant information during bicycling.
5.Press
(See cross reference in page 19)
to end,
select Exit, press
6.Stop bicycling, press
YES/NO,
to confirm, press again
to view
results of current bicycling, press
to exit,
select
Save, press YES/NO,
to confirm, the system
returns to standby mode after bicycling data is saved.
Switch between training programs
HR-SET
129~144
TARGET
CALORIE
HARD
152~171
MOD.
133~152
TARGET
DIST
LIGHT
114~133
TARGET
TIME
Change to see other information
Distance
Calories
Exercise Timing
Instant bicycling screen
User Manual
17
5
Exercise Mode
Training programs:
Training program
Name
LIGHT*
114~133
Light*
MOD.*
133~152
Medium*
HARD*
152~171
Strong*
HR-SET
129~144
Description
•Intensity: 60~70% of the maximum heart rate.
•Application: health upkeep and weight control.
•Intensity: 70~80% of the maximum heart rate.
•Application: aerobic exercise and advanced fitness
training.
•Intensity: 80~90% of the maximum heart rate.
•Application: sports games and athletic training.
Target
•Setup range:
Heart Rate Zone
TARGET
TIME
Target Training
Time
TARGET
DIST
Target
Distance
TARGET
CALORIE
Target Burning
Calorie
•Setup range:
129~144
129~144
lower limit
70-144 bpm
upper limit
144-220 bpm
0 : 30
0 : 30
0-99 hours
5-55 minutes
•Setup range in metric unit: 0.5-999.9 kilometer.
•Setup range in Imperial unit: 0.5-619.5 miles.
•Setup range: 50-10,000 Cal (Kcal).
•Training program marked with " " symbol is calculated by your Cycling Computer system
according to your age setup. You may customize the target heart rate range with the HR-SET
program.
•The upper and lower limit of heartbeat varies with your age. Please choose and set a proper
training target on the basis of your physical fitness before every exercise session.
•After a custom training target is achieved, a champion trophy
displays on the screen.
•Precautions before exercising:
1.Make sure the optional sensor has been paired with your Cycling Computer. (Page 10-11)
2.Set the Cycling Computer Hot Key to CONNECT SENSOR. If you have set HOT KEY to
CONNECT SENSOR, you may skip the training program selection by pressing key
in the
sleep mode to start exercise timing directly. (Page 15)
3.Please only connect sensors required by specific exercises to save time in search for
Bluetooth connections. (Page15)
4.Activate your Speed and Cadence Sensor before using by cranking to start the sensor and
establish connection. Your Speed and Cadence Sensor remains awake for one minute. It goes
back to sleep mode again if no Bluetooth connection is enabled.
5.In case your Cycling Computer lost connection with the sensor during bicycling, the message
"LINK HR or LINK SC" prompts, press
to select option YES or NO, press
to confirm
your choice. If you choose option YES, your Cycling Computer starts searching for the
sensor again, searched successfully, continue timing. If you choose option NO, your Cycling
Computer continues the timing without searching for the sensor.
6.If your Cycling Computer has not recieved a signal for 4 hours during bicycling, Cycling mode
will automatically end and return to standby mode.
18
Cyclaid 10, Bluetooth Cycling Computer
Exercise Mode
5
Instant exercise screen:
Current Time
Connection to the sensorNote 1
SpeedNote 3
Pedal
frequencyNote 3
HeartbeatNote 2
Other information displayNote 4
Indicator
Name
SpeedNote 3
HeartbeatNote 2
•Heartbeat per minute
•Display unit: BPM (Heartbeat per Minute)
Pedal
FrequencyNote 3
•Pedaling frequency in minute
•Display unit: RPM (Rate per Minute)
Exercise Timing
•Note 1: The
smartphone.
Description
•Kilometers (Miles) per hour
•Display in metric unit: KPH (KM per Hour)
•Display in Imperial unit: MPH (Mile per Hour)
•Display format: HH:MM:SS
Trip Distance
•The minimum metric display unit: 0.1 KM
•The minimum Imperial display unit: 0.1 ML
CaloriesNote 2
•Display in unit of Kcal (Cal)
SlopeNote 5
•In unit of percentage (%)
HeightNote 5
•The metric display unit: 1 meter (M)
•The Imperial display unit: 1 foot (FT)
symbol display at top of screen once connected with the sensor and
with
•Note 2: Value of heartbeat and calories display only when worked together with Heart Rate
Strap. The heartbeat reading flashes once the target area is exceeded.
•Note 3: Value of speed, pedal frequency and trip distance display only when worked together
with Speed and Cadence Sensor.
•Note 4: When viewing current other information, name of the reading displays 1 second before
its value does.
•Note 5: Slope and height readings derived from GPS of your phone display only when a
smartphone or mobile device is connected.
User Manual
19
6
Log Function
6-1 Browse and Delete File
1.In standby mode, press
to point to MEMORY FILE, press
to enter.
2.Press
to point to file selection,
to enter, press
to page through the file.
3.Viewing single lap dataNote 1: in the VIEW LAPS window,
select YES,
to
confirm, press
to view single lap data in sequence, press
after viewing to
back to last page.
select YES,
to confirm the
4.To delete a file: in the DELETE FILE window,
deletion.
5.Press
to exit after the operation is completed.
Current Time
Average Speed
Average
Heartbeat
Average
Pedaling
Frequency
TRIP TM
00:30:53
Maximum
Speed
Maximum
Heartbeat
TRIP DST
8.1 KM
Maximum
Pedaling
Frequency
Other information reference table:
20
File infomration
Name
File infomration
Name
TRIP TM
00:30:53
Exercise
Time
VIEW
LAPS
Select to view
single lap dataNote 1
TRIP DST
8.1 KM
Distance
UPLOAD
FILE
(See page 21)
CALORIE
174 Cal
Calories
DELETE
FILE
(See STEP 5)
LAPS
08
Number of Laps
(See STEP 4)
Upload File
Delete File
• Note 1: You may get to view average speed/heartbeat/
pedaling frequency/time per laps.
• Maximum number of laps: 50, lap equivalence:
metric: one kilometer per lap.
Imperial: one mile per lap.
Cyclaid 10, Bluetooth Cycling Computer
Log Function
6-2 Upload File
6
1.Open ALA COACH+ App>Settings>My Sensors>Cycling Computer>Cycling
Computer Data Import>SMART CYCLING.
2.In the Cycling Computer MEMORY FILE>desired file selection>UPLOAD FILE
window, press
to select YES,
to confirm and create Bluetooth connection,
connected, press App Start button.
3.After the uploading is completed, the App prompts OK, press App Save button and
then press the button at upper left corner to exit the mobile device, press
at your
Cycling Computer to exit.
Inspection is ON
Confirm window
UPLOAD
FILE
YES
UPLOAD
FILE
Upload completed, click to exit.
UPLOAD
FILE
•Precautions on file uploading:
1.Make sure the mobile device has paired with your Cycling Computer. (Page 24)
2.Check the mobile device>Settings>Bluetooth® system and ALA COACH+ App>Settings>My
Sensors>Cycling Computer is ON.
User Manual
21
7
View Exercise Statistics
1.In standby mode, press
to point to EXERCISE
STAT., press
to enter.
2.Press
to page through accumulation data.
3.Press again
to enter the RESET window. To reset
accumulation dataNote 1,
select YES,
to confirm
your choice.
4.Press
to exit after the operation is completed.
EXERCISE
STAT.
--------
Total TME
3 HR
Total DST
45 KM
Total CAL
1128
Accumulated
Exercise Time
Accumulated
Distance
Accumulated Energy
Consumption
Confirm window
RESET
NO
EXERCISE
STAT.
-------RESET
YES
•Execute RESET to clear total exercise amount data.
•The RESET function does not erase the exercise file. To delete it, go to MEMORY FILE, and
select individual file for deletion.
22
Cyclaid 10, Bluetooth Cycling Computer
Connect to Smartphone or Mobile Device
8
8-1 Install App and Enable the Bluetooth Function
Please install the ALA COACH+ App on your mobile device
before connecting to it and open your mobile device's Bluetooth®
function for functions including pairing, synchronizing exercises,
and file uploading.
Search and install: ALA COACH+
Please scan to download
immediately
Supported OS: Apple iOS 5.0 or later, Android 4.3 or later
Compatible mobile devices:
•iPhone 4S or later
•iPod Touch 5 or later
•iPad 3 or later
•iPad mini or later
•HTC One Max
•HTC One (M8)
•Please visit us at www.alatech.com to learn more
about the latest information on compatible mobile
devices and supported accessories.
Please make sure you have turned on your mobile device >Settings>Bluetooth®
system in advance.
Settings
Please pair your optional sensor with the mobile device. (See user manual
included with the sensor for the pairing procedure.)
User Manual
23
8
Connect to Smartphone or Mobile Device
8-2 Pair Your Cycling Computer with Mobile Device
STEP1
Check your mobile device>Settings>Bluetooth® system is open.
(Page 23)
STEP2
Set Cycling Computer Hot Key to CONNECT PHONE. (Page15)
STEP3
Open ALA COACH+ App>Settings>My Sensors>Cycling Computer
>Cycling Computer Setting>Add New Sensor.
STEP4
Pairing steps:
to create
1.When Cycling Computer is in standby mode, press
Bluetooth connection.
2.Once your Cycling Computer is discovered by the App,
press
to start pairing.
3.Once pairing is
completed, the App
prompts OK, press
the upper left button to
exit the mobile device
to exit your
and key
Cycling Computer.
Pairing completed, click to exit.
You may
rename it.
•Keep your mobile device and Cycling Computer within 10cm from each other and keep both
away from other Bluetooth devices to prevent incorrect pairing.
24
Cyclaid 10, Bluetooth Cycling Computer
Connect to Smartphone or Mobile Device
8
8-3 Smartphone Exercise Sync.
STEP1
STEP2
Open ALA COACH+ App>Homepage, scroll to Bike and press Start
button.
Operation steps:
1.When Cycling Computer is in standby mode, press
to create
Bluetooth connection.
2.When the App prompts every device is discovered and ready, after
countdown, the App and your Cycling Computer sync. starts timing.
to view instant information during bicycling.
3.Press
4.Stop bicycling, press Cycling Computer's
key and OK to exit, the
Cycling Computer exit to standby mode to sleep, the App exit to the
Homepage and save data of current results.
Connection to
mobile phone.
Press to stop
bicycling.
Instant exercise screen
•Precautions on connecting smartphone for Exercise Sync.:
1.Make sure your mobile device has been paired with your Cycling Computer. (Page 24)
2.Make sure your mobile device has been paired with your optional sensors. (See user manual
included with the sensor for the pairing procedure.)
3.Make sure the Cycling Computer Hot Key is set to CONNECT PHONE. (Page 15)
4.Check the mobile device>Settings>Bluetooth® and ALA COACH+ App>Settings>My
Sensors>Cycling Computer is ON.
(Continued on next page.)
User Manual
25
8
Connect to Smartphone or Mobile Device
8-4 Synchronize with Smartphone
(...Continued from previous page.)
•Precautions on connecting smartphone for Exercise Sync.:
5.Basic settings from ALA COACH+ App in your mobile device applies when bicycling with
synchronized smartphone.
6.Please keep your mobile device and Cycling Computer within 10 meters direct sight distance
from each other during exercise sync.
7.The exercise result data would be saved in ALA COACH+ App>FILE instead of your
Cycling Computer after the exercise is ended and also added to your Cycling Computer's
total cumulative exercise duration, burned calories and distances.
8-4 Synchronize with Smartphone
STEP1
Open ALA COACH+ App>Settings>My Sensors>Cycling Computer
>Cycling Computer User Setting.
Inspection is ON
STEP2
Setup in sequence.
Synchronize to the
system settings
SYSTEM SET
Synchronize to the training
targets
TARGET SET
Synchronize to the system settings
SYSTEM SET
Synchronize to the user settings
USER SET
Synchronize to the sensor settings
SENSOR SET
26
Cyclaid 10, Bluetooth Cycling Computer
Connect to Smartphone or Mobile Device
8-4 Synchronize with Smartphone
STEP3
Open ALA COACH+ App>Settings>My Sensors>Cycling Computer
>User Setting Sync. >SMART CYCLING.
STEP4
Synchronization steps:
1.When Cycling Computer
is in standby mode,
to point to
press
PHONE SYNC., press
to create Bluetooth
connection, after
connected, press the App
Start button.
2.Once Sync. is completed,
the App prompts OK,
press the App upper left
button to exit the mobile
to exit
device, and Key
your Cycling Computer.
8
Sync. completed, click to exit.
PHONE
SYNC
•Precautions on connecting smartphone for Synchronizing with Smartphone:
1.Check the mobile device>Settings>Bluetooth® system and ALA COACH+
App>Settings>My Sensors>Cycling Computer is ON.
2.Make sure your smartphone or mobile device has been paired with your Cycling Computer
otherwise, please pair the two in advance. (Page 24)
3.Keep your mobile device and Cycling Computer within 10cm from each other and keep both
away from other Bluetooth devices during synchronization.
User Manual
27
S
Specifications
•Product: Cyclaid 10, Bluetooth Cycling Computer
•Model: CB300
•Operation temperature: -10°C to 60°C (14°F to 140°F )
•Water proof grade: IPX7
•Battery type: CR2032
•Battery life: Around one year on average
(on the basis of exercise seven days per week and one hour per day)
•Battery low indicator
•Backlight: EL
•Transmission technology: Bluetooth 4.0 (Bluetooth® Smart)
•Receiving transmission distance: around 10 meters (line of sight)
•Compatible accessories:
ALATECH Bluetooth 4.0 Heart Rate Strap (Optional)
ALATECH Bluetooth 4.0 Speed & Cadence Sensor (Optional)
•Compatible devices:
iOS 5.0 or later system version (iPhone 4S or later)
Android 4.3 or later system version
•Dimension: L60.5×W37.5×D13.5mm
•Weight: 27.8g
•Material employed: ABS case
28
Cyclaid 10, Bluetooth Cycling Computer
Appendix
A
Precautions for use with Cyclaid 10
•Due to we cannot guarantee compatibility with other manufacturer's sensors, we
sincerely recommend you use ALATECH Bluetooth sensors with your Cyclaid 10 for
bicycle activity tracking. Recommend compatible sensors as below:
ALATECH Heart Rate Strap (model CS009/CS010/CS011/CS012)
ALATECH Speed & Cadence Sensor (model SC001BLE/SC002)
•To ensure sufficient transmission range from your heart rate strap to your
smartphone, keep your smartphone in front of you. We recommend you do not put
it in a back pocket or backpack during smartphone exercise sync.
Take Care of your Cyclaid 10
•DO NOT drop or hit your Cycling Computer.
•DO NOT expose your Cycling Computer to extreme temperature or humidity.
•DO NOT use general purpose non-adhesive screen sheet to protect the poanel from
scratching.
•DO NOT try to disassemble, repair or modify your Cycling Computer. Fail to do so
may void the warranty.
Fail to Connect to Bluetooth Devices
•In case your Cyclaid 10 failed to connect to a Bluetooth device, please do the
following:
1.Check battery power in your Cycling Computer and the mobile device.
2.Make sure the Cycling Computer HOT KEY is set to CONNECT PHONE. (Page 15)
3.Check whether your Cycling Computer is enabled, ALA COACH+ App>Settings>
My Sensors>Cycling Computer.
4.Keep the mobile device and your Cycling Computer within 10 meters direct sight
distance from each other.
5.If the Bluetooth indicator on the device status bar turn from white to
semi transparent, restart the mobile device, Bluetooth® system and
ALA COACH+ App.
6.Restart the mobile device, Bluetooth® system and ALA COACH+ App.
7.If the problem persists, please try pairing the mobile device with other Bluetooth
device to find out the cause is caused by any of your Cycling Computer, the
mobile device, or the Bluetooth® system.
•If your Cyclaid 10 failed to connect with sensors through Bluetooth, please do the
following:
1.Check battery power in your Cycling Computer and the sensor.
2.Make sure the Cycling Computer HOT KEY is set to CONNECT SENSOR. (Page15)
User Manual
29
A
Appendix
Health Warnings
•Consult your doctor before starting or changing your
exercise program.
Replace Battery Indicator
Once the battery power is down to a certain level; the
following functions may be affected or limited:
•Bluetooth connection lost and link with sensor or
mobile device failed.
•Backlight failed to turn on.
•TRAINING PROG. cannot be performed.
•The device will reset itself when the power goes out.
Replaced the battery immediately, if any of the above conditions
occurs or a Replace Battery Indicator appears.
Battery Installation
1.Use a coin to twist it counter-clockwise to
.
2.Remove the cover and insert (replace) the battery
(type: CR2032) into the sensor with positive (+)
side facing up.
points to
3.Place the battery cover (
to twist the cover clockwise to close (
). Use a coin OIN
points to ). C
•Do the basic setups described in page 12-15 after every battery replacement. If you have done
the Cycling Computer user setup with the ALA COACH+ App, you may re-sync settings to your
Cycling Computer as described in "Phone sync." on page 26-27.
Precautions on the Use of Battery
Button battery in your Cycling Computer may suffer shortened life cycle or cause
damage to the core, fire, chemical burns, electrolyte leakage, and/or personal injury.
•DO NOT expose your device to a heat source or high temperatures.
•DO NOT burn or drill your device or its battery.
•Please store your device in environment with a temperature range from
-10°C to 60°C (14°F to 140°F ) if it is not to be used for long time.
•DO NOT use your device in environment with temperatures exceeding
-10°C to 60°C (14°F to 140°F ).
•Please check local regulations for disposal of your device / battery or contact
local waste disposal agencies.
30
Cyclaid 10, Bluetooth Cycling Computer
Appendix
A
Warnings on replaceable batteries:
•DO NOT remove batteries with pointed object.
•Keep batteries out of children's reach.
•DO NOT disassemble, drill, or damage batteries.
•Please replace batteries with correct ones. Fail to do so may lead to fire or
explosion.
•Replaced button battery may contain perchlorate substance and require special
disposal. Warnings on non-replacement battery: DO NOT try to remove nonreplacement battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Please check local waste disposal
regulations to dispose your
wasted battery.
FCC Declaration of Conformity
This device complies with Part 15, FCC Code. Operation of this device is subject to
the following two conditions:
1.Devices may not cause interference.
2.Must accept interference from other sources, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
•FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
User Manual
31
© 2014 ALATECH Technology Limited. All rights reserved.
2PF182128100004 (1/2016, Rev.H)