HD3MWIH - Honeywell Video Systems

HD3MWIH
www.honeywellvideo.com
equIP® SERIES WIDE DYNAMIC 720p TRUE DAY/NIGHT
INDOOR MINIDOME IP CAMERA
Honeywell’s latest addition to the equIP® Series of IP-based products, the HD3MWIH, is a high
definition, Wide Dynamic, True Day/Night indoor fixed minidome network camera engineered to
provide extremely crisp images at minimal bandwidth. The HD3MWIH provides 720p resolution
at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding
clarity and definition. Digital Noise Reduction (DNR) results in significant storage savings without
sacrificing image quality in low light. The 1/3" progressive scan CMOS sensor offers the latest
in digital video surveillance technology with accurate color rendition through a wide variety of
lighting conditions. The HD3MWIH also supports the PSIA specification for interoperability
between network video products.
The compact, one piece design provides fast and easy installation in any application. The camera
comes complete with surface and flush mounting options (compatible with a 4S electrical box)
and an optional wall/pendant mount kit is available.
HD3MWIH shown with mounting
ring for surface mount
In addition to the low-light color performance, the camera will automatically switch to black and
white. In this mode, lighting can be complemented with infrared for discreet/covert low-light
surveillance with exceptional monochrome images. In high contrast lighting conditions, the
HD3MWIH delivers higher quality images and significantly better dynamic range (>100 dB) than
conventional IP cameras. Designed for environments with difficult lighting, the HD3MWIH camera
offers a unique solution to capture the whole picture regardless of lighting condition or application.
A 3D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies
mechanical camera adjustment. The Varifocal Auto Iris lens allows the field of view to be adjusted
to suit the scene requirements.
A powerful and intuitive web client allows fine tuning of the camera. This can also be performed
from most NVR setup utilities.
HD3MWIH shown without
mounting ring for flush mount
The HD3MWIH supports dual video streams and multiple compression formats with frame rates
up to 30 frames per second (25 fps for PAL systems). The compression parameters for the two
video streams are independently configurable. The primary stream is dedicated to H.264. The
secondary stream can be configured for H.264 or MJPEG. The HD3MWIH features analog video
out for aiming and focusing during setup.
With built-in low current power over Ethernet (IEEE 802.3af), power is supplied to the camera
using standard network cabling, eliminating the need for a separate power supply and
associated wiring. In retrofit situations where PoE support is not available, the unit can also be
powered directly from 24 V AC.
Market Opportunities
The HD3MWIH is perfect for installations where excellent picture clarity at minimal bandwidth is
required. At three times the resolution of standard analog cameras, yet with similar bandwidth
requirements, the HD3MWIH can be retrofitted on many existing NVR installations without
requiring additional storage.
Features
• Outstanding image quality, 720p
(1280 x 720) resolution
• 30 fps (25 fps PAL) progressive scan
• True Day/Night, 3.3–12 mm VFAI lens
with mechanical IR cut filter
• Dynamic range: 115 dB
• Camera tamper detection
• Video motion detection
• Wall/pendant mount kit available
• Selectable compression formats
• Dual digital video streams,
independently configurable, H.264
and/or H.264/MJPEG
• Web server for remote setup of camera
video and network parameters
• Remote firmware update
• Choice of 24 V AC or PoE IEEE 802.3af
power inputs
• Supports both dynamic and static
IP addresses
• Supports input and output alarm
contacts
• Single model for surface mount
and recessed ceiling applications,
4S adapter plate also supplied
• Supports bidirectional audio
• Includes advanced IP locator software
to make system setup easy
• PSIA support
HD3MWIH
www.honeywellvideo.com
SPECIFICATIONS
Like all cameras in the equIP® Series of IP-based products, the HD3MWIH network camera uses Honeywell technology for camera
video motion detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion
detection recognizes object motion within the field of view; then a simple on-screen notification alerts the user. Camera tamper
detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s integrity and alerts
the customer to either a live event or a system problem that is causing disruption to the video stream. Honeywell’s technology also
allows users to remotely upload firmware to the camera. Setup is quick and easy and can be customized through a web client or
from an NVR. The built-in web server provides password-protected access to the camera’s video and network setup.
System Diagram
Hybrid DVR
Monitor
NETWORK
Analog out
NVR
Keyboard
equIP® Series
Cameras
Performance Series
Cameras
Monitor
Monitor
HD3MWIH
www.honeywellvideo.com
SPECIFICATIONS
Environmental
Operational
Video Standard
NTSC, PAL
Temperature
Operating: 14°F to 122°F (-10°C to 50°C)
Storage: -4°F to 140°F (-20°C to 60°C)
Scanning
System
Progressive scan
Relative
Humidity
0% to 85%, non-condensing
Image Sensor
1/3" CMOS
Number of
Pixels (H x V)
1280 × 720
Video
Compression
Dual stream H.264 and MJPEG
Minimum
Illumination
0.14 lux color/0.1 lux BW @ 50 IRE, F1.6
Video Output
(Aux)
1.0 Vp-p @ 75 ohms
Dynamic Range
115 dB
Primary Stream
Resolution
1280 x 720
800 x 450
640 x 360
320 x 180
Bitrate H.264
(Typical)*
2.7 Mbps
1.8 Mbps
0.9 Mbps
0.315 Mbps
S/N Ratio
50 dB or more (AGC off)
Up to 30/25 fps video in all resolutions
Auto Gain
Control
Frame Rate
NTSC/PAL
Off/On, selectable (20-40 dB)
Automatic
Electronic Shutter
1/30-1/87,000 sec (NTSC and PAL)
Lens Type
True Day/Night (TDN), 3.3 - 12 mm
Varifocal Auto Iris, F1.6
IP Specifications
Video
Streaming
Wide
Tele
Diagonal
125.7°
29.9°
Horizontal
89.8°
23.9°
Vertical
63.6°
17.9°
Auto, Manual, WBC Push
Audio/Two-Way
Line in/out
Electrical
Input Voltage
24 V AC, PoE IEEE 802.3af
Input Range
17–28 V AC
Surge
Suppression
1.5 kW transient
Power
Consumption
5.0 W (max) 24 V AC
PoE: PD Type 1 Class 2
Mechanical
Storage/Day
(GB)
28.48
18.98
9.49
3.32
Dual streaming: H.264 and MJPEG
Controllable frame rate and bandwidth
Constant or variable bit rate
Security
Multiple user access levels with
password protection
Video Access
from Web Browser
Full control of all camera settings
available to administrator
Angle of View
White Balance
Frame
Rate
30/25
30/25
30/25
30/25
Minimum
Web
Browsing
Requirements
Pentium IV CPU 3.1 GHz or faster
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
Windows XP® SP3,
Windows 2003 Server R2 (32-bit),
Windows 7 (32-/64-bit),
Windows 2008 Server (32-/64-bit),
Windows 2008 R2 (64-bit)
Internet Explorer 6, 7, 8, or 9
Installation and
Management
Maintenance
Honeywell IP Utility software identifies
the IP address, discovers cameras,
supports firmware upgrades
Supported
Protocols
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS,
RTCP, FTP, ICMP, DHCP, Bonjour,
IGMP, Telnet
Standards
PSIA support
Regulatory
Emissions
FCC, CE (EN55022)
Immunity
CE (EN50130-4)
Safety
EU: EN60950-1
North America ETL listed to UL/CSA
60950-1
Dimensions
(W x H)
4.9" x 4.9" (125.1 mm x 124.2 mm)
Weight
1.04 lb (0.47 kg) camera only
Construction
Housing: Polycarbonate and Die cast aluminum
Finish: Matte texture, off white
*Actual bitrate is scene and motion dependent with H.264 stream.
Connector
Video Output: 2-pin Molex connector
Power Input: Removable screw block
Network: RJ45 connector
Alarm I/O: Removable screw block
Audio In: Removable screw block
Audio Out: Removable screw block
HD3MWIH
www.honeywellvideo.com
SPECIFICATIONS
System Integration
Accessories
Open IP Integration
Housing and Mounts
PSIA support and open API for real interoperability between
Honeywell and other manufacturer’s IP-enabled security
devices. Refer to the Honeywell Open Technology Alliance
[http://www.security.honeywell.com/hota/] to learn more
about our open and integrated solutions.
HD3-MK1
Wall/Pendant Mount Kit, Off White
3.5“
(89.0 mm)
Pendant Mount Option
1.8“
(46.7 mm)
Ø2.88“
(73.1 mm)
5.8“
(146.7 mm)
0.9“
(23.0 mm)
1.8“
(46.0 mm)
4.9“
(124.2 mm)
3.2“
(82.5 mm)
3.0“
(77.5 mm)
4.9“
(125.1 mm)
6.4“
(161.5 mm)
4.9“
(125.1 mm)
3.8“
(97.1 mm)
6.1“
(154.0 mm)
6.8“
(172 mm)
1.1“
(28.5 mm)
0.4“
(9.1 mm)
Wall Mount Option
Flush Mount Option
Ordering
HD3MWIH
Network TDN Indoor Fixed Minidome Camera, 1/3" Progressive Scan, CMOS, Wide Dynamic
720p Resolution, 3.3-12 mm VFAI Lens, 24 V AC or PoE IEEE 802.3af, H.264, NTSC
HD3MWIHX
Network TDN Indoor Fixed Minidome Camera, 1/3" Progressive Scan, CMOS, Wide Dynamic
720p Resolution, 3.3-12 mm VFAI Lens, 24 V AC or PoE IEEE 802.3af, H.264, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
Automation and Control Solutions
Honeywell Security Products Americas
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY 40299
1.800.323.4576
www.honeywell.com
L/HD3MWIHD/D
January 2013
© 2013 Honeywell International Inc.