HP FlexFabric 5930 TAA-compliant Switch Series

Data sheet
HP FlexFabric 5930
Switch Series
Key features
•Cut-through with ultra-low latency and wirespeed
•VXLAN and NVGRE hardware support for virtualized environments
•High-density 40GbE spine/ToR connectivity
•IPv6 support with full L2 and L3 features
•Convergence-ready with DCB, FCoE, and TRILL
Product overview
HP FlexFabric 5930 Switch Series is a family of high-density, ultra-low latency, top-of-rack (ToR)
switches that is part of the HP FlexNetwork architecture’s HP FlexFabric solution.
Ideally suited for deployment at the aggregation or server access layer of large enterprise data
centers, the HP 5930 Switch Series is also powerful enough for deployment at the data center
core layer of medium-sized enterprises.
With the increase in virtualized applications and server-to-server traffic, customers now
require spine and ToR switch innovations that will meet their needs for higher-performance
server connectivity, convergence of Ethernet and storage traffic, the capability to handle virtual
environments, and ultra-low latency, all in a single device—the HP FlexFabric 5930 Switch
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Features and benefits
Quality of service (QoS)
•Powerful QoS features
––Flexible classification
Creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and
DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, remark, and
––Feature support
Provides support for strict priority queuing (SP), weighted fair queuing (WFQ), weighted
deficit round robin (WDRR), SP+WDRR together, configurable buffers, Explicit Congestion
Notification (ECN), and weighted random early detection (WRED)
Data center-optimized
•Flexible high port density
HP FlexFabric 5930 Switch Series enables scaling of the server edge with 40GbE spine and ToR
deployments to new heights with high-density 32-port solutions delivered in a 1RU design.
Each 40GbE QSFP+ port can also be configured as four 10GbE ports by using a 40GbE-to10GbE splitter cable.
•High-performance switching
Cut-through and nonblocking architecture delivers low latency (~1 microsecond for 10GbE)
for very demanding enterprise applications; the switch delivers high-performance switching
capacity and wirespeed packet forwarding
•Higher scalability
HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access
networks; up to four HP 5930 switches can be combined to deliver unmatched scalability of
virtualized access layer switches and flatter two-tier networks using IRF, which reduces cost
and complexity
•Advanced modular operating system
Comware v7 software’s modular design and multiple processes bring native high stability,
independent process monitoring, and restart; the OS also allows individual software modules
to be upgraded for higher availability and supports enhanced serviceability functions like
hitless software upgrades with single-chassis ISSU
TRansparent Interconnection of Lots of Links (TRILL) is supported to increase the scale of
enterprise data centers; Edge Virtual Bridging with Virtual Ethernet Port Aggregator (EVB/
VEPA) provides connectivity into the virtual environment for a data center-ready environment
•Reversible airflow
Enhanced for data center hot-cold aisle deployment with reversible airflow—for either frontto-back or back-to-front airflow
•Redundant fans and power supplies
1+1 internal redundant and hot-pluggable power supplies and dual fan trays enhance
reliability and availability
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
•Lower OPEX and greener data center
Provide reversible airflow and advanced chassis power management
•Data Center Bridging (DCB) protocols
Provides support for IEEE 802.1Qbb Priority Flow Control (PFC), Data Center Bridging Exchange
(DCBX), and IEEE 802.1Qaz Enhanced Transmission Selection (ETS) for converged applications
•FCoE support
Provides support for Fibre Channel over Ethernet (FCoE), including expansion, fabric, trunk VF
and N ports, and aggregation of E-port and N-port virtualization; fabric services such as name
server, registered state change notification, and login services; per-VSAN fabric services, FSPF,
soft and hard zoning, Fibre Channel traceroute, ping, debugging, and FIP snooping
•Jumbo frames
With frame sizes of up to 10,000 bytes on Gigabit Ethernet and 10-Gigabit ports, allows highperformance remote backup and disaster-recovery services to be enabled
•VXLAN and NVGRE hardware support
Supports, in hardware, VXLAN and NVGRE overlay technologies
•Full-featured console
Provides complete control of the switch with a familiar CLI
––Ingress and egress port monitoring
Enable network problem solving
––Traceroute and ping
Enable testing of network connectivity
•Multiple configuration files
Allow multiple configuration files to be stored to a flash image
•sFlow (RFC 3176)
Provides wire-speed traffic accounting and monitoring
•SNMP v1, v2c, and v3
Facilitate centralized discovery, monitoring, and secure management of networking devices
•Out-of-band interface
Isolates management traffic from user data plane traffic for complete isolation and total
reachability, no matter what happens in the data plane
•Remote configuration and management
Delivered through a secure command-line interface (CLI) over Telnet and SSH; Role-Based
Access Control (RBAC) provides multiple levels of access; configuration rollback and multiple
configurations on the flash provide ease of operation; remote visibility is provided with sFlow
and SNMP v1/v2/v3, and is fully supported in HP Intelligent Management Center (IMC)
•ISSU and hot patching
Provides hitless software upgrades with single-unit In Services Software Upgrade (ISSU) and
hitless patching of the modular operating system
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Provides automatic configuration via DHCP auto-configuration
•Network Time Protocol (NTP) and Secure Network Time Protocol (SNTP)
Synchronize timekeeping among distributed time servers and clients; keep consistent
timekeeping among all clock-dependent devices within the network so that the devices can
provide diverse applications based on the consistent time
Resiliency and high availability
•HP Intelligent Resilient Framework (IRF) technology
Enables an HP FlexFabric to deliver resilient, scalable, and secured data center networks
for physical and virtualized environments; groups up to four HP 5930 switches in an IRF
configuration, allowing them to be configured and managed as a single switch with a single IP
address; simplifies ToR deployment and management, reducing data center deployment and
operating expenses
•IEEE 802.1w Rapid Convergence Spanning Tree Protocol
Increases network uptime through faster recovery from failed links
•IEEE 802.1s Multiple Spanning Tree
Provides high link availability in multiple VLAN environments by allowing Multiple Spanning
•Virtual Router Redundancy Protocol (VRRP)
Allows groups of two routers to back each other up dynamically to create highly available
routed environments
•Hitless patch upgrades
Allows patches and new service features to be installed without restarting the equipment,
increasing network uptime and facilitating maintenance
•Ultrafast protocol convergence (< 50 ms) with standard-based failure detection
Bidirectional Forwarding Detection (BFD) Enables link connectivity monitoring and reduces
network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
•Device Link Detection Protocol (DLDP)
Monitors link connectivity and shuts down ports at both ends if unidirectional traffic is
detected, preventing loops in STP-based networks
•Graceful restart
Allows routers to indicate to others their capability to maintain a routing table during a
temporary shutdown and significantly reduces convergence times upon recovery; supports
Layer 2 switching
•MAC-based VLAN
Provides granular control and security; uses RADIUS to map a MAC address/user to specific
•Address Resolution Protocol (ARP)
Supports static, dynamic, and reverse ARP and ARP proxy
•IEEE 802.3x Flow Control
Provides intelligent congestion management via PAUSE frames
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
•Ethernet link aggregation
Provides IEEE 802.3ad Link Aggregation of up to 128 groups of 16 ports; support for LACP,
LACP Local Forwarding First, and LACP Short-time provides a fast, resilient environment that is
ideal for the data center
•Spanning Tree Protocol (STP)
Supports STP (IEEE 802.1D), Rapid STP (RSTP, IEEE 802.1w), and Multiple STP (MSTP, IEEE
•VLAN support
Provides support for 4,096 VLANs based on port, MAC address, IPv4 subnet, protocol, and
guest VLAN; supports VLAN mapping
•IGMP support
Provides support for IGMP Snooping, Fast-Leave, and Group-Policy; IPv6 IGMP Snooping
provides Layer 2 optimization of multi-cast traffic
•DHCP support at Layer 2
Provides full DHCP Snooping support for DHCP Snooping Option 82, DHCP Relay Option 82,
DHCP Snooping Trust, and DHCP Snooping Item Backup
Layer 3 services
•Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP
operation between subnets or when subnets are separated by a Layer 2 network
•Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks and supports client and server; DHCP Relay
enables DHCP operation across subnets
•Operations, administration and maintenance (OAM) support
Provides support for Connectivity Fault Management (IEEE 802.1AG) and Ethernet in the First
Mile (IEEE 802.3AH); provides additional monitoring that can be used for fast fault detection
and recovery
Layer 3 routing
•Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
Allow quick failover of router ports
•Policy-based routing
Makes routing decisions based on policies set by the network administrator
•Equal-Cost Multipath (ECMP)
Enables multiple equal-cost links in a routing environment to increase link redundancy and
scale bandwidth
•Layer 3 IPv4 routing
Provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, BGP, and
•Open Shortest Path First (OSPF)
Delivers faster convergence; uses this link-state routing Interior Gateway Protocol (IGP), which
supports ECMP, NSSA, and MD5 authentication for increased security and graceful restart for
faster failure recovery
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
•Border Gateway Protocol 4 (BGP-4)
Delivers an implementation of the Exterior Gateway Protocol (EGP) utilizing path vectors; uses
TCP for enhanced reliability for the route discovery process; reduces bandwidth consumption
by advertising only incremental updates; supports extensive policies for increased flexibility;
scales to very large networks
•Intermediate system to intermediate system (IS-IS)
Uses a path vector Interior Gateway Protocol (IGP), which is defined by the ISO organization for
IS-IS routing and extended by IETF RFC 1195 to operate in both TCP/IP and the OSI reference
model (Integrated IS-IS)
•Static IPv6 routing
Provides simple manually configured IPv6 routing
•Dual IP stack
Maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network
to an IPv6-only network design
•Routing Information Protocol next generation (RIPng)
Extends RIPv2 to support IPv6 addressing
Provides OSPF support for IPv6
Extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing
•IS-IS for IPv6
Extends IS-IS to support IPv6 addressing
•IPv6 tunneling
Allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a
standard IPv4 packet; supports manually configured, 6 to 4, and Intra-Site Automatic Tunnel
Addressing Protocol (ISATAP) tunnels; is an important element for the transition from IPv4 to
•Policy routing
Allows custom filters for increased performance and security; supports ACLs, IP prefix, AS
paths, community lists, and aggregate policies
•Bidirectional Forwarding Detection (BFD)
Enables link connectivity monitoring and reduces network convergence time for RIP, OSPF,
•Multicast Routing PIM Dense and Sparse modes
Provides robust support of multicast protocols
•Layer 3 IPv6 routing
Provides routing of IPv6 at media speed; supports static routing, RIPng, OSPFv3, BGP4+ for
IPv6, and IS-ISv6
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Additional information
•Green IT and power
Improves energy efficiency through the use of the latest advances in silicon development;
shuts off unused ports and utilizes variable-speed fans, reducing energy costs
•Low maximum power consumption
Uses just 409 W of AC or 399 W of DC power
•Low maximum power consumption
Uses just 409 W of AC or 399 W of DC power
•USB support
––File copy
Allows users to copy switch files to and from an USB flash drive
•Multiple configuration files
Stores easily to the flash image
•SNMPv1, v2c, and v3
Facilitate centralized discovery, monitoring, and secure management of networking devices
•Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping
consistent among all clock-dependent devices within the network so that the devices can
provide diverse applications based on the consistent time
•Port mirroring
Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
•Remote configuration and management
Is available through a command-line interface (CLI)
•IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network,
facilitating easy mapping by network management applications
•sFlow (RFC 3176)
Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact
on network performance; this allows network operators to gather a variety of sophisticated
network statistics and information for capacity planning and real-time network monitoring
•Command authorization
Leverages RADIUS to link a custom list of CLI commands to an individual network
administrator’s login; an audit trail documents activity
•Dual flash images
Provides independent primary and secondary operating system files for backup while
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
•Command-line interface (CLI)
Provides a secure, easy-to-use CLI for configuring the module via SSH or a switch console;
provides direct real-time session visibility
Provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log
throttling and log filtering to reduce the number of log events generated
•Management interface control
Provides management access through a modem port and terminal interface, as well as inband and out-of-band Ethernet ports; provides access through terminal interface, Telnet, or
secure shell (SSH)
•Industry-standard CLI with a hierarchical structure
Reduces training time and expenses, and increases productivity in multi-vendor installations
•Management security
Restricts access to critical configuration commands; offers multiple privilege levels with
password protection; ACLs provide Telnet and SNMP access; local and remote syslog
capabilities allow logging of all access
•Information center
Provides a central repository for system and network information; aggregates all logs, traps,
and debugging information generated by the system and maintains them in order of severity;
outputs the network information to multiple channels based on user-defined rules
•Network management
HP Intelligent Management Center (IMC) centrally configures, updates, monitors, and
•Remote intelligent mirroring
Mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote
switch port anywhere on the network
•Access control lists (ACLs)
Provide IP Layer 3 filtering based on source/destination IP address/subnet and source/
destination TCP/UDP port number
Eases switch management security administration by using a password authentication server
•Secure shell
Encrypts all transmitted data for secure remote CLI access over IP networks
•IEEE 802.1X and RADIUS network logins
Controls port-based access for authentication and accountability
•Port security
Allows access only to specified MAC addresses, which can be learned or specified by the
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
•LLDP-MED (Media Endpoint Discovery)
Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN
to configure network devices such as IP phones automatically
Warranty and support
•1-year warranty
Advance hardware replacement with 10-calendar-day delivery (available in most countries)
•Electronic and telephone support
Limited electronic and business-hours telephone support is available from HP for the entire
warranty period; to reach our support centers, refer to hp.com/networking/contact-support;
for details on the duration of support provided with your product purchase, refer to hp.com/
•Software releases
To find software for your product, refer to hp.com/networking/support; for details on the
software releases available with your product purchase, refer to hp.com/networking/
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
HP FlexFabric 5930 TAA-Compliant Switch Series
HP FF 5930-32QSFP+ TAA-Compliant Switch (JG727A)
I/O ports and slots
32 QSFP+ 40GbE ports
Additional ports and slots
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 USB 2.0
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
2 fan tray slots
The customer must order fan trays, as fan trays are not included with the switch. This system requires two
same-direction airflow fan trays to function properly. The system should not be operated with only one fan tray
for more than 24 hours. The system should not be operated without a fan tray for more than two minutes. The
system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply
with these operating requirements may void the product warranty.
Physical characteristics
17.32(w) x 25.98(d) x 1.72(h) in (44.00 x 66.0 x 4.37 cm)
28.66 lb (13 kg) shipping weight
Memory and processor
512 MB flash, 4 GB SDRAM; packet buffer size: 12.2 MB
10 Gbps Latency
Routing/Switching capacity
Routing table size
MAC address table size
< 1 µs (64-byte packets)
up to 1905 Mpps
2560 Gbps
16000 entries (IPv4), 8000 entries (IPv6)
288000 entries
Operating temperature
Operating relative humidity
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
Low-speed fan: 65.7 dB, High-speed fan: 70.6 dB
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
HP FF 5930-32QSFP+ TAA-Compliant Switch (JG727A)
Electrical characteristics
Maximum heat dissipation
AC voltage
Maximum power rating
Idle power
1396 BTU/hr (1472.78 kJ/hr)
100 - 240 VAC
-36 to -75 VDC
409 W
175 W
50/60 Hz
Idle power is the actual power consumption of the device with no ports connected.
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in,
and all modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM;
ROHS Compliance
VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-32:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Power frequency magnetic field
Voltage dips and interruptions
ETSI EN 300 386 V1.3.3
EN 55024:1998+ A1:2001 + A2:2003
EN 61000-4-2; IEC 61000-4-2
EN 61000-4-3; IEC 61000-4-3
EN 61000-4-4; IEC 61000-4-4
EN 61000-4-5; IEC 61000-4-5
EN 61000-4-6; IEC 61000-4-6
IEC 61000-4-8; EN 61000-4-8
EN 61000-4-11; IEC 61000-4-11
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
IMC—Intelligent Management Center; command-line interface; out-of-band management; SNMP Manager;
Telnet; FTP
The customer must order a power supply, as the device does not come with one. At least one JC680A or JC681A
is required.
Refer to the HP website at hp.com/networking/services for details on the service-level descriptions and product
numbers. For details about services and response times in your area, please contact your local HP sales office.
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Standards and Protocols
(applies to all products in series)
RFC 1163 Border Gateway Protocol
RFC 1771 BGPv4
RFC 1997 BGP Communities Attribute
RFC 2918 Route Refresh Capability
RFC 3392 Capabilities Advertisement
with BGP-4
RFC 4271 A Border Gateway Protocol
4 (BGP-4)
RFC 4360 BGP Extended Communities
RFC 4456 BGP Route Reflection: An
Alternative to Full Mesh Internal BGP
RFC 4760 Multiprotocol Extensions for
Device management
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 1591 DNS (client)
RFC 1902 (SNMPv2)
RFC 1908 (SNMP v1/2 Coexistence)
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP
V1, V2, V3)
Multiple Configuration Files
Multiple Software Images
SSHv1/SSHv2 Secure Shell
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of
Spanning Tree
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3ag Ethernet OAM
IEEE 802.3ah Ethernet in First Mile over
Point to Point Fiber - EFMF
IEEE 802.3x Flow Control
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 868 Time Protocol
RFC 896 Congestion Control in IP/TCP
RFC 950 Internet Standard Subnetting
RFC 1027 Proxy ARP
RFC 1058 RIPv1
RFC 1091 Telnet Terminal-Type Option
RFC 1141 Incremental updating of the
Internet checksum
RFC 1142 OSI IS-IS Intra-domain
Routing Protocol
RFC 1191 Path MTU discovery
RFC 1213 Management Information
Base for Network Management of TCP/
IP-based internets
RFC 1253 (OSPF v2)
RFC 1531 Dynamic Host Configuration
RFC 1533 DHCP Options and BOOTP
Vendor Extensions
RFC 1534 DHCP/BOOTP Interoperation
RFC 1591 DNS (client only)
RFC 1624 Incremental Internet
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 2030 Simple Network Time
Protocol (SNTP) v4
RFC 2236 IGMP Snooping
RFC 2453 RIPv2
RFC 2581 TCP Congestion Control
RFC 2644 Directed Broadcast Control
RFC 2767 Dual Stacks IPv4 & IPv6
RFC 3046 DHCP Relay Agent
Information Option
RFC 3768 Virtual Router Redundancy
Protocol (VRRP)
RFC 4250 The Secure Shell (SSH)
Protocol Assigned Numbers
RFC 4251 The Secure Shell (SSH)
Protocol Architecture
RFC 4252 The Secure Shell (SSH)
Authentication Protocol
RFC 4253 The Secure Shell (SSH)
Transport Layer Protocol
RFC 4254 The Secure Shell (SSH)
Connection Protocol
RFC 4364 BGP/MPLS IP Virtual Private
Networks (VPNs)
RFC 4419 Diffie-Hellman Group
Exchange for the Secure Shell (SSH)
Transport Layer Protocol
RFC 4594 Configuration Guidelines for
DiffServ Service Classes
RFC 4941 Privacy Extensions for
Stateless Address Autoconfiguration
in IPv6
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Autoconfiguration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over
Ethernet Networks
RFC 2473 Generic Packet Tunneling in
RFC 2545 Use of MP-BGP-4 for IPv6
RFC 2563 ICMPv6
RFC 2711 IPv6 Router Alert Option
RFC 2740 OSPFv3 for IPv6
RFC 2767 Dual stacks IPv4 & IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 4291 IP Version 6 Addressing
RFC 4862 IPv6 Stateless Address Autoconfiguration
RFC 5095 Deprecation of Type 0
Routing Headers in IPv6
RFC 2571 SNMP Framework MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
Network management
RFC 3164 BSD syslog Protocol
RFC 2328 OSPFv2
RFC 3137 OSPF Stub Router
RFC 3623 Graceful OSPF Restart
RFC 4577 OSPF as the Provider/
Customer Edge Protocol for BGP/MPLS
IP Virtual Private Networks (VPNs)
RFC 4811 OSPF Out-of-Band LSDB
RFC 4812 OSPF Restart Signaling
RFC 4813 OSPF Link-Local Signaling
IEEE 802.1P (CoS)
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding
RFC 3247 Supplemental Information
for the New Definition of the EF PHB
(Expedited Forwarding Per-Hop
RFC 3260 New Terminology and
Clarifications for DiffServ
Access Control Lists (ACLs)
SSHv2 Secure Shell
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
HP FlexFabric 5930 TAA-Compliant Switch Series accessories
HP X140 40G QSFP+ MPO SR4 Transceiver (JG325A)
HP X240 40G QSFP+ to QSFP+ 1m Direct Attach Copper Cable (JG326A)
HP X240 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable (JG327A)
HP X240 40G QSFP+ to QSFP+ 5m Direct Attach Copper Cable (JG328A)
HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable (JG329A)
HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable (JG330A)
HP X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable (JG331A)
HP X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver (JG661A)
HP X140 40G QSFP+ MPO SR4 Transceiver (JG325B)
HP X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver (JG709A)
Power Supply
HP 58x0AF 650W AC Power Supply (JC680A)
HP 58x0AF 650W DC Power Supply (JC681A)
Fan Tray
HP X711 Front (port side) to Back (power side) Airflow High Volume Fan Tray (JG552A)
HP X712 Back (power side) to Front (port side) Airflow High Volume Fan Tray (JG553A)
Learn more at
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Data sheet | HP FlexFabric 5930 TAA-compliant Switch
Sign up for updates
Share with colleagues
Rate this document
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
4AA5-5970ENW, December 2014