Durable 1D/2D Handheld Scanner

Product profile
SR31T
Durable 1D/2D
Handheld Scanner
SCANNING
Available with the industry’s fastest
2D imaging technology for highly
responsive, dependable scanning
RUGGED
Tested to withstand repeated 1.83
meter drops to concrete and rated IP53
PLUG & PLAY
Simply connect the scanner to
the host and start scanning
immediately; no time-consuming
configuration necessary
ADAPTABLE
Can be customized to your
environment, with adjustable LED
color, beeper tone and vibration setting
ERGONOMIC
Time-tested design is comfortable
to hold for extended periods
Gain a Performance Advantage
The SR31T was designed to maximize
user productivity. Area imager versions
integrate Intermec’s EA30 or EA31
imaging engines for a level of scanning
speed and responsiveness historically
found in only the fastest laser scanners.
Extreme motion tolerance (up to 500 in/
sec) and omni-directional reading result
in effortless, consistent scanning—at any
orientation.
With an uncanny ability to read poorquality codes, the SR31T can help you
avoid error-prone manual data input
routines. Read codes that are damaged,
partially obscured, off-angle, colored,
high resolution, or low contrast. And
thanks to VESTA, Intermec’s patented
scanning algorithm, EAN/UPC and
Code 39 read range is increased by an
average of 60 percent.*
Ready for Tomorrow
The SR31T high performance imager
was developed to address your scanning
needs now and well into the future.
Not only can it read all common 1D,
PDF, 2D, and postal symbologies—it
can also reliably read these codes from
smartphone, tablet, and computer
displays.
Reliability for the Long Term
Performance isn’t just about speed;
it’s also about longevity in demanding
environments. The SR31T sets a new
ruggedness standard, with an IP53 rating
*Compared to previous-generation SR30 scanners.
for protection against dust and water
ingress, and an impressive 1.83 meter
(six foot) drop specification to concrete.
Easy to Install, Easy to Use
Integrating the SR31T into your
environment is truly plug-and-play.
Simply connect the scanner to the host
and start scanning. If new application
requirements arise, just change out the
interface cable with the simple push of
a button—no need to replace the entire
scanner. This flexibility reduces device
costs and complexity, both for you and
your IT staff.
The SR31T also includes distinctive
design elements that add to its
versatility. Unique touches, like the oversized LED light pipe on the scanner head,
provide bright 360-degree feedback in
any lighting condition—and its color can
be personalized to match the décor of
your environment.
Scanner Configuration Made Easy
The SR31 can be quickly and easily
customized with Intermec’s exclusive
EasySet™ PC programming tool. In just
a few clicks, this Windows-based utility
can print configuration bar codes; adjust
security settings; activate or disable
symbologies; and alter beeper, vibrate
or LED settings. Even sophisticated
data editing routines can be set. When
you’re satisfied with the settings, simply
create a configuration bar code to quickly
program additional scanners to match.
Physical Characteristics
Dimensions (LxWxH):
10.7 cm (4.2 in) x 6.8 cm (2.7 in) x 16.8 cm (6.6 in)
Weight: 195 gm (6.9 oz)
Typical Power Consumption
SR31T2D/HP: 360 mA @ 5V DC
SR31T1D: 120 mA @ 5V DC
Connectivity
• USB: Virtual Com, HID profiles
• POS Interfaces: HID POS, IBM SurePOS
• PC Keyboard Wedge
• RS232
• Wand Emulation
• OS Compatibility: iOS, Android®, Windows XP/ Vista/7/8
Scan Technology
SR31THP: Intermec Area Imager with Laser Aimer (EA30)
SR31T2D: Intermec Area Imager with LED Aimer (EA31)
SR31T1D: Intermec Linear Imager (EV14+)
Bar Code Symbologies for 1D Model (SR31T1D)
Codabar, Code 11, Code 39, Code 93/93i, Code 128
(GS1-128), EAN/UPC, GS1 DataBar Limited, GS1 Composite (linear only), GS1 DataBar Expanded, GS1 DataBar
Omnidirectional, Interleaved 2 of 5, Matrix 2
of 5, MSI, Plessey, Standard 2 of 5, Telepen
Bar Code Symbologies for 2D Models (SR31THP/2D)
All above symbologies supported by 1D model plus the
following: DataMatrix, QR Code, Micro QR, PDF417, Micro
PDF417, Aztec, Maxicode, Han Xin, Codablock A, Codablock
F, GS1 Composite, TLC 39, and Postal Codes (Australian
Post, BPO, Canada Post, Dutch Post, Infomail, Intelligent
Mail, Japan Post, Planet, Postnet, Sweden Post)
Scan Performance
Min. Code Resolution:
Min. Print Contrast:
Max. Scan Rate:
Motion Tolerance:
1D Codes: 4 mils
2D Codes: 6.6 mils
SR31T1D: 20%
SR31T2D/HP: 20%
SR31T1D: 200 scans/s
SR31THP: 500 in/s
SR31T2D: 400 in/s
Electromagnetic Emissions Standards
Meets the requirements of the following product emission standards:
• FCC Part 15 Class B (United States)
• Industry Canada ICES-003 Class B (Canada)
• EN 55022: CISPR 22 Class B (European Union)
SR31THP
Symbology
Density
Minimum
Distance
Maximum
Distance
Code 39
0.1 mm
(4 mils)
4 cm
(1.57 in)
21 cm
(8.27 in)
0.125 mm
(5 mils)
3 cm
(1.18 in)
26 cm
(10.24 in)
0.5 mm
(20 mils)
5 cm
(1.97 in)
70 cm
(27.56 in)
1 mm
(40 mils)
13 cm
(5.12 in)
124 cm
(48.82 in)
EAN/UPC
0.33 mm
(13 mils)
4 cm
(1.57 in)
46 cm
(10.11 in)
PDF417
0.25 mm
(10 mils)
3 cm
(1.18 in)
26 cm
(10.24 in)
0.38
(15 mils)
3 cm
(1.18 in)
35 cm
(13.78 in)
0.25 mm
(10 mils)
5 cm
(1.97 in)
21 cm
(8.27 in)
Environmental Compliance Requirements
Conforms to environmental compliance requirements
for RoHS, China RoHS, WEEE, and REACH.
Regulatory Approvals
UL; CE Mark (EU); C-TICK (Australia and New Zealand)
Standard Warranty
Five year standard warranty, with extended protection
available via Intermec Medallion Support Services.
Accessories
View the SR31T Accessory Guide for complete details.
• Adjustable Stand
• Gooseneck Stand
• Cables (USB, Powered USB, RS232, Keyboard Wedge Interface, Wand Emulation)
• EasySet™ Configuration Software
Typical Reading Distances*
SR31T1D
Symbology
Density
Minimum
Distance
Maximum
Distance
Code 39
0.1 mm
(4 mils)
4.5 cm
(1.77 in)
21.5 cm
(8.46 in)
0.125 mm
(5 mils)
3.5 cm
(1.38 in)
24 cm
(9.45 in)
0.25 mm
(10 mils)
3.5 cm
(1.38 in)
31 cm
(12.20 in)
1 mm
(40 mils)
8.5 cm
(3.35 in)
86 cm (33.86
in)
0.33 mm
(13 mils)
3.2 cm
(1.26 in)
31.5 cm
(12.40 in)
Symbology
Density
Minimum
Distance
Maximum
Distance
Code 39
0.1 mm
(4 mils)
3 cm
(1.18 in)
18 cm
(7.09 in)
0.125 mm
(5 mils)
3 cm
(1.18 in)
23 cm
(9.06 in)
0.5 mm
(20 mils)
5 cm
(1.97 in)
66 cm
(25.98 in)
1 mm
(40 mils)
13 cm
(5.12 in)
116 cm
(45.67 in)
EAN/UPC
0.33 mm
(13 mils)
4 cm
(1.57 in)
40 cm
(15.75 in)
PDF417
0.25 mm
(10 mils)
3 cm
(1.18 in)
24 cm
(9.45 in)
0.38
(15 mils)
3 cm
(1.18 in)
35 cm
(13.78 in)
0.25 mm
(10 mils)
4 cm
(1.57 in)
18 cm
(7.09 in)
EAN/UPC
DataMatrix
*The reading distances for each scanner are typical distances measured from the front end of the
scanner bezel in an office environment (200 lux)
with extended reading range activated (if applicable).
Note: This warning applies only to SR31THP (EA30) models.
SR31T2D
User Feedback
• Oversized, Multi-Color, Color-Customizable LED
• Configurable Buzzer
• Configurable Vibrator
Environment
Operating Temperature: 0°C to +50°C (32°F to +122°F)
Storage Temperature: -20°C to +70°C (-4°F to +158°F)
Relative Humidity: 5 to 95% non-condensing
Drop: 26 drops from 1.83 m (6 ft.) to concrete
Tumbles: 3000 tumbles at 1 m height
Environmental Rating: IP53
Ambient Light: 0 to 100,000 lux
DataMatrix
Medallion Support Services
Medallion
COMPLETE
Medallion
STANDARD
Medallion
SELECT
Please visit http://www.intermec.com/ap/medallion
for more information.
Asia Pacific Offices
Singapore
Intermec Technologies (S) Pte Ltd
151, Lorong Chuan, #05-02A/03 (Lobby C),
New Tech Park, Singapore 556741
Tel : +65 6303 2100
Fax: +65 6303 2199
www.intermec.com.sg
Australia (Sydney)
Level 4, 1-3 Atchison Street,
St. Leonards, NSW 2065,
Australia
Tel : +61 2 9330 4400
Fax: +61 2 9437 0240
www.intermec.com.au
Korea
Hong-Eun B/D Room 902,
824-22, Yeoksam-dong, Gangnam-gu,
Seoul 135-934, Korea
Tel : +82 2 552 2484
Fax: +82 2 552 2483
www.intermec.co.kr
China (Shanghai)
Unit C1-C2, Floor 26,
Junyao International Plaza,
No.789 Zhaojiabang Road, Xuhui District,
Shanghai, P.R. China 200032
Tel : +86 21 6278 1090
Fax: +86 21 6278 1081
Malaysia
Suite L-8-11, Wisma BU8,
No 11, Lebuh Bandar Utama,
PJU 6, Petaling Jaya, 47800,
Selangor, Malaysia
Tel : +603 7726 8730
Fax: +603 7727 8731
Australia (Melbourne)
Suite 3, Building 31,
Omnico Business Centre Monash,
270, Ferntree Gully Road,
Notting Hill, VIC 3168, Australia
Tel : +61 3 8540 6300
www.intermec.com.au
Hong Kong
Rm 3601 11/F, AXA Centre,
151 Gloucester Road,
Wanchai, Hong Kong
P.R. China
Tel : 852 3752 1906
Fax: 852 3013 9401
Thailand
Two Pacific Place, Unit 1105,
142 Sukhumvit Road, Klongtoey,
Bangkok 10110,
Thailand
Tel : +662 653 2750
Fax: +662 653 2751
Australia (Brisbane)
Brisbane Technology Park
Office 30, Level 1,
7, Clunies Ross Court, Eight Mile Plains,
QLD 4113, Australia
Tel : +61 7 3147 8262
www.intermec.com.au
China (Beijing)
1510A, 15th floor, South Tower,
Raycom Infotech Park C,
No.2 Science Institute South Road,
Haidian District, Beijing,
P.R. China 100190
Tel : +86 10 5165 5922
Fax: +86 10 6583 4408
China (Shenzhen)
Unit D & E, Floor 9,
Tower A, NEO Building,
No.6011, Shennan Middle Road,
Futian District, Shenzhen,
P.R. China 518048
Tel : +86 755 8831 2391
Fax: +86 755 8831 2396
New Zealand
A2, 4 Pacific Rise,
Mount Wellington 1060,
Auckland, New Zealand
Tel : +64 9 573 0293
China Toll Free: 400 6100 277
www.intermec.com.cn
Copyright © 2013 Intermec Technologies Corporation. All rights reserved. Intermec is a registered
trademark of Intermec Technologies Corporation. All other trademarks are the property of their
respective owners. Printed by MG Digital Pte Ltd (Corp-093 10/13).
In a continuing effort to improve our products, Intermec Technologies (S) Pte Ltd reserves the right
to change specifications and features without prior notice.