OmniAccess 200 Series Access Points

ALCATEL-LUCENT OMNIACCESS
200 SERIES ACCESS POINTS
BRINGING 802.11AC TO THE MASSES
Multifunctional and affordable OmniAccesss 200 series 802.11ac wireless access points (APs)
maximize mobile device performance in medium-density enterprise Wi-Fi environments.
These compact and cost-effective dualradio APs deliver wireless data rates of
up to 867 Mb/s to 5 GHz devices with
802.11ac technology, leveraging two
spatial multiple-input and multiple-output
(MIMO) streams while simultaneously
supporting 2.4 GHz 802.11n clients with
data rates of up to 300 Mb/s.
The AP205 and IAP205 models feature
four integrated omnidirectional downtilt
antennas, while the AP204 and IAP204
support external detachable dual-band
antennas using two RP-SMA antenna
connectors.
The 200 series APs enhances unified
access portfolio for the mobile enterprise
that is able to deliver applications and
services along with consistent, highquality user experience across wired and
wireless environments.
The unified access network starts with
a wire-rate 10GbE/40GbE network core.
The core includes the Alcatel-Lucent
OmniSwitch™ 6900 Stackable LAN Switch,
OmniSwitch 9000E Chassis LAN Switch,
and the OmniSwitch 10K Modular LAN
Chassis. The unified access network provides a common set of network services,
policy framework, authentication scheme
and a single authentication database that
applies to users accessing the network
with either wired or wireless devices.
Wire line access is provided by stackable
LAN switches like the Alcatel-Lucent
OmniSwitch 6855 Hardened LAN Switch,
OmniSwitch 6850E and OmniSwitch 6450
Stackable LAN Switches and OmniSwitch
6250 Stackable Fast Ethernet Switch;
wireless access is provided by comprehensive portfolio of 802.11ac, 802.11n
OmniAccess™ Wi-Fi access points and
Controllers; while BYOD, guest access,
onboarding and policy management
services are provided by ClearPass Policy
Management System.
The 200 series APs offer a choice of
operating modes to meet individual management and deployment requirements.
• Controller-managed AP or Remote AP
(R AP) running AOS-W. When managed
by OmniAccess Mobility Controllers, 200
series APs offer centralized configuration,
data encryption, policy enforcement and
network services, as well as distributed
and centralized traffic forwarding.
• Alcatel-Lucent Instant AP running
InstantOS. In Instant mode, a single AP
automatically distributes the network
configuration to other Instant APs in the
WLAN. Simply power-up an Instant AP,
configure it over the air, and plug in the
other APs – the entire process takes about
five minutes.
If WLAN requirements change, a built-in
migration path allows 200 series Instant
APs to become part of a WLAN managed
by a Mobility Controller.
FEATURES
• ClientMatch dynamically optimizes
Wi-Fi client perfor­mance as users roam
and RF conditions change.
• Remote spectrum analysis to identify
sources of RF interference
• Advanced Cellular Coexistence (ACC)
• The 200 series APs support priority
handling and policy enforcement for
unified communication apps, including
Microsoft® Lync™ with encrypted
videoconferencing, voice, chat and
desktop sharing.
BENEFITS
• Improved WiFi quality and support
high densities of mobile devices.
• Delivers best-in-class RF management
• ACC feature enables Alcatel-Lucent
WLANs to perform at peak efficiency
by minimizing interference with
3G/4G networks.
• Quality of service for unified
communication apps
AP200 SERIES SPECIFICATIONS
• AP205 and IAP205
¬2.4 GHz (300 Mb/s max rate) and 5 GHz
(867 Mb/s max rate) radios, each with
2 x 2 MIMO and four integrated omnidirectional downtilt antennas
• AP204 and IAP204
¬2.4 GHz (300 Mb/s max rate) and 5 GHz
(867 Mb/s max rate) radios, each with
2 x 2 MIMO and two combined, diplexed
external RP-SMA antenna connectors
ADVANCED FEATURES
• RF management
¬Adaptive Radio Management™ (ARM)
technology automatically assigns
channel and power settings, provides
airtime fairness and ensures APs stay
clear of all sources of RF interference
to deliver reliable, high-performance
WLANs
¬200 Series APs can be configured to
provide part-time or dedicated air
monitoring for spectrum analysis and
wireless intrusion protection, virtual
private network (VPN) tunnels to extend
remote locations to corporate resources,
and wireless mesh connections where
Ethernet drops are not available
• Spectrum analysis
¬Capable of part-time or dedicated air
monitoring, the spectrum analyzer
remotely scans the 2.4 GHz and 5 GHz
radio bands to identify sources of RF
interference
•Security
¬Integrated Trusted Platform Module
(TPM) to securely store credentials
and keys
¬SecureJack-capable to securely tunnel
wired Ethernet traffic
OPERATING MODES
• Instant AP
• Mobility Controller-managed AP
• RAP for branch deployments
• Air monitor (AM) for wireless intrusion
detection system (WIDS), rogue detection
and containment
• Spectrum analyzer, dedicated or hybrid
• Secure enterprise mesh
Alcatel-Lucent OmniAccess 200 Series Access Points
ALCATEL-LUCENT ENTERPRISE DATA SHEET
2
WIRELESS RADIO
SPECIFICATIONS
• Supported data rates (Mb/s):
¬802.11b: 1, 2, 5.5, 11
• AP type: Indoor, dual radio, 5 GHz
802.11ac and 2.4 GHz 802.11n 2 x 2:2
¬802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
• Software-configurable dual radio supports
5 GHz (Radio 0) and 2.4 GHz (Radio 1)
¬802.11ac: 6.5 to 867 (MCS0 to MCS9,
NSS = 1 to 2)
¬802.11n: 6.5 to 300 (MCS0 to MCS15)
• 2 x 2 MIMO with two spatial streams and
up to 867 Mb/s wireless data rate
• 802.11n high-throughput (HT) support:
HT 20/40
• Supported frequency bands (countryspecific restrictions apply):
• 802.11ac very high throughput (VHT)
support: VHT 20/40/80
¬2.4000 GHz to 2.4835 GHz
¬5.150 GHz to 5.250 GHz
¬5.250 GHz to 5.350 GHz
¬5.470 GHz to 5.725 GHz
¬5.725 GHz to 5.850 GHz
• Available channels: Dependent on
configured regulatory domain
• Dynamic frequency selection (DFS)
optimizes available RF spectrum use
• Supported radio technologies:
¬802.11b: Direct-sequence spread
spectrum (DSSS)
¬802.11a/g/n/ac: Orthogonal frequencydivision multiplexing (OFDM)
• Supported modulation types:
¬802.11b: Binary phase-shift keying
(BPSK), quadrature phase shift keying
(QPSK), Complementary Code Keying
(CCK)
¬802.11a/g/n/ac: BPSK, QPSK, 16-QAM,
64-QAM, 256-QAM
• Transmit power: Configurable in
increments of 0.5 dBm
• Maximum (aggregate, conducted total)
transmit power (limited by local regulatory
requirements):
¬2.4 GHz band: +21 dBm
(18 dBm per chain)
¬5 GHz band: +21 dBm
(18 dBm per chain)
• 802.11n/ac packet aggregation: A-MPDu,
A-MSDu
Antennas
• AP204/IAP204: Two RP-SMA connectors
for external dual-band antennas. Internal
loss between radio interface and external
antenna connectors (due to diplexing
circuitry): 1.5 dB in 2.4 GHz and 3.0 dB
in 5 GHz
• AP205/IAP205: Four integrated down-tilt
omni- directional antennas for 2 x 2 MIMO
with maximum antenna gain of 4.0 dBi
in 2.4 GHz and 6.0 dBi in 5 GHz. built-in
antennas are optimized for horizontal
ceiling-mounted orientation of the AP
OTHER INTERFACES
• 10/100/1000BASE-T Ethernet network
interface (RJ-45)
¬Auto-sensing link speed and MDI/MDX
¬802.3az Energy-Efficient Ethernet (EEE)
¬Power over Ethernet (PoE)-PD: 48-V DC
(nominal) 802.3af PoE
• DC power interface, accepts 1.7 mm/
4.0 mm center-positive circular plug with
9.5 mm length
• Visual indicators (LEDs):
¬Power/system status
¬Ethernet link status (ENET)
¬Radio status (two; RAD0, RAD1)
• Advanced Cellular Coexistence (ACC)
minimizes interference from cellular
networks
• Reset button: factory reset (during device
power up)
• Maximum ratio combining (MRC)
for improved receiver performance
• Kensington security slot
• Cyclic delay/shift diversity (CDD/CSD)
for improved downlink RF performance
• Serial console interface (RJ-45)
POWER
• Short guard interval for 20 MHz, 40 MHz
and 80 MHz channels
• Maximum (worst-case) power
consumption: 12.5 W (PoE) or 11.7 W (DC)
• Space-time block coding (STBC) for
increased range and improved reception
• Maximum (worst-case) power consumption
in idle mode: 8.4 W (PoE) or 7.7 W (DC)
• Low-density parity check (LDPC) for highefficiency error correction and increased
throughput
• Direct DC source: 12-V DC nominal, +/- 5%
• Transmit beamforming (TxBF) for
increased reliability in signal delivery
• Power sources sold separately
• PoE: 48-V DC (nominal) 802.3af-compliant
source
• When both power sources are available,
DC power takes priority
MOUNTING
• Included with AP:
¬Mounting brackets (2) for attaching to
9/16 inch or 15/16 inch T-bar drop-tile
ceiling
• Spare mounting kit:
¬AP220-MNT-C1: Access Point Mount Kit
(ceiling grid).
Contains two ceiling grid rail adapters
(for basic flat rails)
• Optional mounting kits:
¬ OAW-AP220-MNTC2: OmniAccess AP220
Series Access Point Mount Kit (ceiling
grid). Contains two ceiling grid rail
adapters (for Interlude and Silhouette
style rails)
¬OAW-AP220-MNTW1: OmniAccess
AP220 Series Access Point Mount Kit
(basic, flat surface). Contains on flat
surface wall/ceiling mount bracket
¬OAW-AP220-MNTW2: OmniAccess
AP220 Series Access Point Mount Kit
(box style, secure, flat surface).
Contains on flat surface wall/ceiling
secure mount cradle
MECHANICAL
• Dimensions/weight (unit, excluding mount
accessories):
¬150 mm x 150 mm x 41.5 mm
(W x D x H)
¬380 g
• Dimensions/weight (shipping):
¬190 mm x 187 mm x 57 mm (W x D x H)
¬550 g
ENVIRONMENTAL
•Operating:
¬Temperature: 0°C to +40°C
(+32°F to +104°F)
¬Humidity: 5% to 95% non-condensing
• Storage and transportation:
¬Temperature: -40°C to +70°C
(-40°F to +158°F)
REGULATORY
• FCC/Industry Canada
• CE Marked
• R&TTE Directive 1995/5/EC
• Low Voltage Directive 72/23/EEC
RELIABILITY
Mean time between failures (MTBF):
711,187 hours (81.2 years) at +25°C
operating temperature
REGULATORY MODEL NUMBER
• OAW-AP204 and OAW-IAP204: APIN0204
• OAW-AP205 and OAW-IAP205: APIN0205
CERTIFICATIONS
• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi Alliance (WFA) certified
802.11a/b/g/n/ac
WARRANTY
• Limited lifetime warranty
MINIMUM SOFTWARE
VERSIONS
• AOS-W 6.4.1.0
• InstantOS™ 4.2.0.0
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1 and EN 60601-1-2
RF performance table
MAXIMUM TRANSMIT POWER (DBM)
PER TRANSMIT CHAIN
RECEIVER SENSITIVITY (DBM)
PER RECEIVE CHAIN
1 Mb/s
18.0
-95.0
11 Mb/s
18.0
-88.0
6 Mb/s
18.0
-92.0
54 Mb/s
16.0
-74.0
MCS0/8
18.0
-91.0
MCS7/15
16.0
-71.0
MCS0/8
18.0
-88.0
MCS7/15
16.0
-68.0
2.4 GHz
802.11b
802.11g
802.11n HT20
802.11n HT40
Alcatel-Lucent OmniAccess 200 Series Access Points
ALCATEL-LUCENT ENTERPRISE DATA SHEET
3
MAXIMUM TRANSMIT POWER (DBM)
PER TRANSMIT CHAIN
RECEIVER SENSITIVITY (DBM)
PER RECEIVE CHAIN
6 Mb/s
18.0
-93.0
54 Mb/s
16.0
-75.0
MCS0/8
18.0
-91.0
MCS7/15
15.0
-71.0
MCS0/8
18.0
-89.0
MCS7/15
15.0
-68.0
MCS0
18.0
-91.0
MCS9
12.0
-64.0
MCS0
18.0
-88.0
MCS9
12.0
-62.0
18.0
-85.0
5 GHz
802.11a
802.11n HT20
802.11n HT40
802.11ac VHT20
802.11ac VHT40
802.11ac VHT80
MCS0
MCS9
12.0
-59.0
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.
ANTENNA PATTERN PLOTS
Horizontal or azimuth plane (top view), 0 degeree downtilt
345
330
315
300
285
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
0
345
15
30
330
45
315
60
300
75
90
255
285
2.450 1
2.450 2
105
240
195
180
165
15
30
45
60
75
90
105
240
135
210
0
255
120
225
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
120
225
150
135
210
195
2.450 GHz
180
165
150
5.470 GHz
Horizontal or azimuth plane (top view), 30 degree downtilt
345
330
315
300
285
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
0
345
15
30
330
45
315
60
300
75
90
Alcatel-Lucent OmniAccess 200 Series Access Points
ALCATEL-LUCENT ENTERPRISE DATA SHEET
4
255
240
105
120
285
2.450 1
2.450 2
270
255
240
5
0
-5
-10
-15
-20
-25
-30
-35
-40
0
15
30
45
60
75
90
105
120
195
180
195
165
2.450 GHz
180
165
5.470 GHz
Horizontal or azimuth plane (top view), 30 degree downtilt
0
345
330
315
300
285
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
345
15
30
330
45
315
60
300
75
90
255
285
2.450 1
2.450 2
105
240
195
180
165
15
30
45
60
75
90
105
240
135
210
0
255
120
225
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
120
225
150
135
210
195
180
165
150
5.470 GHz
2.450 GHz
Elevation plane (side view, 0 degree angle)
0
345
330
315
300
285
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
345
15
30
330
45
315
300
60
285
75
90
255
2.450 1
2.450 2
195
180
165
30
45
60
75
90
105
120
225
135
210
15
240
120
225
0
255
105
240
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
135
210
150
195
2.450 GHz
180
165
150
5.470 GHz
Elevation plane (side view, 90 degree angle)
0
345
330
315
300
285
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
345
15
30
330
45
60
300
75
90
255
105
240
120
225
135
210
195
180
165
2.450 GHz
Alcatel-Lucent OmniAccess 200 Series Access Points
ALCATEL-LUCENT ENTERPRISE DATA SHEET
5
315
150
285
2.450 1
2.450 2
270
5
0
-5
-10
-15
-20
-25
-30
-35
-40
0
15
30
45
60
75
90
255
105
240
120
225
135
210
195
180
165
5.470 GHz
150
ORDERING INFORMATION
PART NUMBER
DESCRIPTION
200 series access points
OAW-AP204
OmniAccess AP204 Dual radio IEEE 802.11ac (2 x 2:2) wireless access point with support for 802.11’B’ and
802.11’A/G/N/AC’ operation, RP-SMA external antenna connectivity, 1 x 10/100/1000Base-T (RJ-45) Ethernet
Interface (supports 802.3af Power over Ethernet), 1 x 12-V DC power interface
OAW-AP205
OmniAccess AP205 Dual radio IEEE 802.11ac (2x2:2) wireless access point with support for 802.11’B’ and
802.11’A/G/N/AC’ operation, integral antenna, 1 x 10/100/1000Base-T (RJ-45) Ethernet Interface (supports
802.3af Power over Ethernet), 1 x 12-V DC power
Mounting spares
AP-220-MNT-C1
OmniAccess Access Point Mount Kit (ceiling grid). Contains two ceiling grid rail adapters (for flat rails).
Color: black. Spare
Mounting accessories
OAW-AP220-MNTC2
OmniAccess AP220 Series Access Point Mount Kit (ceiling grid). Contains two ceiling grid rail adapters
(for Interlude and Silhouette style rails). Color: black
OAW-AP220-MNTW1
OmniAccess AP220 Series Access Point Mount Kit (basic, flat surface). Contains one flat surface wall/ceiling
mount bracket. Color: black
OAW-AP220-MNTW2
OmniAccess AP220 Series Access Point Mount Kit (box style, secure, flat surface). Contains one flat surface
wall/ceiling secure mount cradle
Generic Indoor AP accessories
OAW-AP-AC-UN
Universal AC Power Adapter Kit for OmniAccess AP and IAP 105, 92, 92 – North America, Japan, United
Kingdom, Italy, EC (Shuko), Australia, China, India, Korea
OAW-AP-AC-12V18
OmniAccess12VDC/18W AC Power Adapter for compatible indoor AP models. Does not include countryspecific power cord.
OAW-MS-3501G
1 Port 802.3af PoE Midspan 10/100/1000 15.4W. No power cord included
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2014 Alcatel-Lucent. All rights reserved. E2014055699EN (July)