5 Disc DVD Changer
DVD-C631P
HEADQUARTERS
105 Challenger Road, Ridgefield Park,
N.J.07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
US
AK68-00148A
Important Safety Instructions
Precautions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
4) Follow all instructions.
This symbol indicates “dangerous
voltage” inside the product that presents
a risk of electric shock or personal injury.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
This symbol indicates important
instructions accompanying the
product.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not
expose this appliance to rain or moisture.
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13) Unplug this apparatus. When a cart is used, use caution when moving the
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and
televisions, use shielded cables and connectors for connections.
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
2
3
Precautions
Before You Start
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Accessories
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093 and
other intellectual property rights. The use of Macrovision’s copy protection technology in the device
must be authorized by Macrovision and is intended for home and other limited pay-per-view uses
only, unless otherwise authorized in writing by Macrovision.
Reverse engineering or disassembly is prohibited.
Remote Control
(AH59-00092W)
Batteries for
Remote Control (AA Size)
(4301-000117)
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the
player’s internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
User’s Manual
(AK68-00148A)
Install Batteries in the
Remote
the battery cover on the back of
1 Open
the remote.
two AA batteries. Make sure that
2 Insert
the polarities (+ and -) are aligned
correctly.
3 Replace the battery cover.
Video/Audio Cable
(AC39-42001R)
If remote doesn’t operate
properly:
• Check the polarity + - of the
batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked
by obstacles.
• Check if there is any fluorescent
lighting nearby.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
4
5
Table of contents
Connections
Choosing a Connection ..............................................................................................14
Basic Functions
Advanced Functions
Excellent Sound
Dolby Digital, a technology developed by
Dolby Laboratories, provides crystal clear
sound reproduction.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Screen
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
MP3/WMA
This unit can play discs created from
MP3/WMA files.
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
Instant Skip
This function skips playback ahead 10
seconds.
NOTE
* Discs which cannot be played with this player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
* Ability to play back may depend on recording conditions.
• DVD-R, +R
• DVD+RW, -RW
• CD-RW
Changing Setup menu
Reference
Troubleshooting ..........................................................................................................45
Specifications ..............................................................................................................46
Warranty ......................................................................................................................47
6
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
7
REFERENCE
Using the Setup Menu ................................................................................................38
Setting Up the Language Features ............................................................................39
Setting Up the Audio Options ....................................................................................41
Setting Up the Display Options ..................................................................................42
Setting Up the Parental Control..................................................................................44
CHANGING
SETUP MENU
Progressive Scan
Progressive scanning creates an improved
picture with double the scan lines of a
conventional interlaced picture.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
ADVANCED
FUNCTIONS
Adjusting the Aspect Ratio (EZ View) ........................................................................24
Slow Repeat play ........................................................................................................26
Selecting the Audio Language ....................................................................................27
Selecting the Subtitle Language ................................................................................28
Changing the Camera Angle ......................................................................................29
Using the Instant Replay/Skip Function ....................................................................30
Using the Bookmark Function ....................................................................................31
Using the Zoom & 3D Sound Functions..........................................................................32
MP3/WMA Play ..........................................................................................................33
Program Play & Random Play ....................................................................................35
Picture CD Playback ..................................................................................................36
Easy View
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
BASIC
FUNCTIONS
Playing a Disc ............................................................................................................16
Operating the Disc Changer ......................................................................................18
Using the Search & Skip Functions ..........................................................................19
Using the Display Function ........................................................................................20
Using the Disc and Title Menu ..................................................................................21
Using the Function Menu ..........................................................................................22
Repeat Play ................................................................................................................23
DVD Changer
The DVD Changer holds 5 discs and provides
full random play with fast disc changes.
CONNECTIONS
General Features ........................................................................................................7
Disc Type and Characteristics ......................................................................................8
Description-Front Panel ................................................................................................9
Display Indicators ....................................................................................................10
Description-Rear Panel ..............................................................................................11
Tour of the Remote Control ........................................................................................12
SETUP
Setup
General Features
Disc Type and Characteristics
Description-Front Panel
SETUP
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
Recording Disc Size
Max.
Playing Time
Types
DVD
5"
Audio
+
Video
31/2"
AUDIO-CD
5"
Single-sided • DVD contains excellent
240 min.
sound and video due to
Double-sided
Dolby Digital and MPEG-2
480 min.
system.
Single-sided • Various screen and audio
functions can be easily
80 min.
Double-sided selected through the onscreen menu.
160 min.
74 min.
Audio
31/2"
Characteristics
20 min.
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
STANDBY/ON
1
2
~
NTSC
• Play Region Number
• NTSC broadcast
system in U.S.A,
Canada, Korea,
Japan, etc.
STEREO
• Dolby Digital disc
• Stereo disc
3
4
5
6
7
DISC
SKIP
8 9 10 11
Front Panel Controls
1. STANDBY / ON
• Use to turn your player on and off (standby).
2. DVD CHANGER (TRAY)
• Press OPEN/CLOSE to open and close the disc
changer.
3. EASY VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
Disc Markings
DISC
EXCHANGE
OPEN/CLOSE
EASY VIEW
4. PLAY/PAUSE (
)
• Begin or pause disc play.
5. STOP (
)
• Stops disc play.
6. SKIP (
/
) / SEARCH
• Use to skip or search a scene or music.
7. OPEN/CLOSE
• Press to open and close the disc tray.
8. DISC EXCHANGE
• Press this button when you want to change a
disc without stopping playback of the current
disc.
9. DISC SKIP
• Use to skip a disc in order.
10. REMOCON RECEIVER
11. FRONT DISPLAY
• Operation indicators are displayed here.
DIGITAL
SOUND
• Digital Audio disc
• DTS disc
• MP3 disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
8
9
Display Indicators
Description-Rear Panel
SETUP
2
3
525P
(480P)
525i
(480i)
S-VIDEO
1 2 3 4 5
1
5
1
4
Front Panel Display
1. Indicates a disc is being played.
2. Play / Pause / Forward play
3. Disc type indicator
4. Displays various messages concerning operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
5. Disc indicator
• Indicates which numbered disc is playing.
2
3
4
5
6
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
4. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video provides the best picture quality.
• If 525P(480P) VIDEO is selected, progressive scan mode will work.
• If 525i(480i) VIDEO is selected, interlaced scan mode will work.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture.
• The VIDEO OUT SELECT switch must be set to the S-VIDEO position.
6. VIDEO OUT SELECT SWITCH
• Use this switch to set video out.
• If 525P(480P) VIDEO is selected, VIDEO and S-VIDEO will not work.
NOTE
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan
settings in the TV’s menu system.
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
10
11
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD Function Buttons
1
13
1. DVD POWER Button
16. PLAY/PAUSE Button (
• Turns the power on or off.
2. NUMBER Buttons
2
17. SKIP Buttons (
• Press the number (1~5) button for 2 seconds to
select the desired disc loaded in the DVD changer.
3. STEP Button
4. I.REPLAY Button
3
4
5
6
7
8
9
15
16
17
18
19
20
5. EZ VIEW Button
6. SEARCH Buttons (
/
)
• Allows you to search forward/backward through a
disc.
)
8. DISC MENU Button
• Brings up the Disc menu.
9. TITLE MENU Button
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
10
11
12
12
11. BOOKMARK Button
22
23
24
12. MENU Button
25
26
27
14. 3D Button
18. RETURN Button
19. INFO Button
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
• Brings up the Title menu.
21
)
• Displays the current disc mode.
• This function is used to replay the previous 10
seconds of the movie from the current position.
7. STOP Button (
/
• Use to skip the title, chapter, or track.
• Returns to a previous menu.
• Advances play one frame at a time.
14
)
• Begin/Pause disc play.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions
on a disc.
25. DISC SKIP
• Use to skip a disc in order.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• Brings up the DVD player’s setup menu.
13. OPEN/CLOSE Button
• To open and close the disc tray.
15. I.SKIP Button
• This function skips playback ahead 10 seconds.
13
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
Basic Audio
• Refer to the owner’s manual of the additional components you are
connecting for more information on those particular components.
AUDIO
SYSTEM
Method 2
Method 3
Method 4
Good
picture
Better
picture
Best
picture
Optimum
picture
TV
Connection to an Audio System
Method 1
Method 1
CONNECTIONS
Before Connecting the DVD Player
AV Cable
S-Video
Cable
Video
Cables
OR
Method 2
OR
DVD
PLAYER
525P
(480P)
525P
(480P)
525I
(480I)
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
OR
Audio Output Jacks
Digital Audio Out
S-Video Jack
S-VIDEO
525I
(480I)
S-VIDEO
Component Video Jacks Component Video Jacks
Method 1
DVD Player + TV with Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 2
DVD Player + TV with S-Video Input Jack
(The VIDEO OUT SELECT switch must be set to the S-VIDEO position.)
Method 3
DVD Player + TV with Component Video Jacks
(The VIDEO OUT SELECT switch must be set to the 525i(480i) position.)
Method 4
DVD Player + TV with Progressive Scan Jacks.
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position).
• If 525P(480P) VIDEO OUT is selected, VIDEO and S-VIDEO will not work.
• Depending on your TV, your hookup for Method 4 may differ from the illustration.
DVD
PLAYER
Analog Audio Out
Video Output Jack
525P
(480P)
525I
(480I)
S-VIDEO
NOTE
Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
14
15
Playing a Disc
Playing a Disc
7 Step Motion Play (Only DVD)
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
SELECT MENU LANGUAGE
Press
Touche
Dr cken Sie
Pulsar
Premere
Druk op
1
2
3
4
5
6
for English
pour Fran ais
f r Deutsch
para Espa ol
per Italiano
voor Nederlands
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
8 Slow Motion Play (Only DVD)
Press the
button on the remote during PAUSE or STEP mode.
- By pressing the
button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
- When playing a DVD, reverse slow motion play will not work.
BASIC
FUNCTIONS
Play
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
2 Place
facing up.
The tray opens.
the PLAY/PAUSE (
3 Press
button to close the disc tray.
4 Stopping Play
5 Removing Disc
6 Pausing Play
Press the STOP (
) button or OPEN/CLOSE
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
) button is pressed twice or the
player is unplugged.)
NOTE
) button during play.
Press the OPEN/CLOSE button.
Press the PLAY/PAUSE (
) or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
) button once again.
16
RESUME function
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly.
Press the PLAY (
) button to resume normal play.
• This
icon indicates an invalid button press.
17
Operating the Disc Changer
Using the Search & Skip Functions
The DVD Changer holds 5 discs and provides full random play with fast disc changes.
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Exchanging Discs
Searching through a Chapter or Track
Exchange allows you to change up to 4 discs
except the disc currently playing.
the DISC EXCHANGE button on the
1 Press
front of the player when in the play mode.
The tray opens with two slots available for
you to load or change discs.
Disc Exchange
play, press the
1 During
on the remote.
or
button
• Press the
or
button on the remote and press again to search at a faster
speed on the DVD, CD.
2
CD
BASIC
FUNCTIONS
DVD 2X, 4X, 8X, 16X, 32X, 128X
Press the DISC SKIP button on the remote or
on the front of the player to turn the platter to
the other two slots. Load or change the third
and fourth discs.
2X, 4X, 8X
• To change all the discs, first press the STOP button,
then the OPEN/CLOSE and DISC SKIP buttons.
Skipping Tracks
3
Press the DISC EXCHANGE, OPEN/CLOSE
button on the front of the player to close the
disc tray.
Using the DISC SKIP function
Use the Disc Skip function to change to another
disc currently in the disc platter.
1 During play, press the
or
button.
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
• When playing a CD, if you press the
button, it moves to next track.
If you press the
button, it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
in play or stop mode, press the DISC
1 While
SKIP button. The platter turns clockwise to the
next available disc.
18
19
Using the Display Function
Using the Disc and Title Menu
When Playing a DVD/CD
1 During play, press the INFO button on the remote.
the UP/DOWN buttons to select the desired
2 Use
item.
Using the Disc Menu
Disc Menu
Title
01
Chapter 02
Audio
Subtitle
3D Sound
0 :0 0 :1 3
Setup
ENTER
RETURN
MENU
Off
ENTER
CD
CD
Time 0 :0 0 :4 8
3D Sound
Using the Title Menu
O ff
ENTER
Most DVD discs are recorded in chapters so that you
Chapter can quickly find a specific passage.
Allows playback of the film from a desired time.
Time You must enter the starting time as a reference.
Function
Off
Track 01
To access the desired title when there is more than
Title one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Press ENTER key
for Disc Menu
Title Menu
BASIC
FUNCTIONS
4
Select Disc Menu using the UP/DOWN buttons,
2 then
press the RIGHT or ENTER button.
ENG 5.1CH
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
To make the screen disappear, press the INFO
button again.
DVD
DVD
Time
the LEFT/RIGHT buttons to make the desired
3 Use
setup, then press ENTER.
the playback of a DVD disc, press the
1 During
MENU button on the remote.
DVD
the playback of a DVD disc, press the
1 During
MENU button on the remote.
DVD
Disc Menu
Press ENTER key
for Title Menu
Title Menu
Title Menu using the UP/DOWN buttons,
2 Select
then press the RIGHT or ENTER button.
Function
Setup
NOTE
ENTER
RETURN
MENU
What is a Chapter?
Refers to the language of the film soundtrack. In the
Audio example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
Refers to the subtitle languages available in the disc.
Subtitle You will be able to choose the subtitles language or, if
you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
Each Title on a DVD is usually divided
into chapters (similar to tracks on an
audio CD).
What is a Title?
A DVD may contain several different
titles. For example, if a disc contains
four different movies, each might be
considered a title.
A surround sound effect is generated using only two
3D Sound front speakers.
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
20
21
Using the Function Menu
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Using the Function Menu
1 Press the MENU button during playback.
Use the UP/DOWN buttons to highlight Function,
2 then
press the RIGHT or ENTER button.
DVD
Disc Menu
Info
When playing a DVD
Zoom
Title Menu
Function
Bookmark
Repeat
EZ View
3
Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
ENTER
Info (See Page 20)
Zoom (See Page 32)
Bookmark (See Page 31)
Repeat (See Page 23)
EZ View (See Page 24~25)
the UP/DOWN button to highlight one of the 5
4 Use
functions. Then press the RIGHT or ENTER button
to access the function.
RETURN
MENU
the REPEAT button on the remote.
1 Press
Repeat screen appears.
DVD
Off Chapter
2
Title
A-B
ENTER
Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT' button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
BASIC
FUNCTIONS
-
Setup
CD
Off
Track
Disc
A-B
ENTER
3 Press ENTER.
to normal play, press REPEAT again,
4 Tothenreturn
press the LEFT/RIGHT buttons to select Off
and press ENTER.
NOTE
• You can also directly select these functions using their respective buttons on the remote.
22
NOTE
• DVD repeats play by chapter or title, CD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
23
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
1 Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the
screen setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set
the correct aspect ratio in the initial setup (See page 43).
If you are using a 16:9 TV
For 16:9 aspect ratio discs
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
• 4:3 Pan Scan
Displays the central portion of the 16:9 screen.
The right and left sections of the screen are cut off.
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
ADVANCED
FUNCTIONS
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom
of the screen will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the black bars may
not disappear completely.)
Adjusting the Aspect Ratio (EZ View)
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full
screen appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will
appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
24
25
Slow Repeat play
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
When playing a DVD
1
the
button to choose the play speed
2 Press
between 1/8X, 1/4X, and 1/2X of normal.
During play, press the PLAY/PAUSE (
) button.
Using the AUDIO button
DVD
Off Chapter
Title
A-B
ENTER
the REPEAT button on the remote.
3 Press
Repeat screen appears.
Chapter, Title or A-B using the LEFT/RIGHT
4 Select
buttons.
1 Press the AUDIO button.
the LEFT/RIGHT buttons to select the
2 Use
desired language on a DVD.
DVD
ENG DOLBY DIGITAL 5.1CH
- The audio languages are represented by abbreviations.
the LEFT/RIGHT buttons to select Stereo,
3 Use
LEFT or RIGHT. (On CD)
CD
CD
Off
Track
Disc
A-B
ENTER
Stereo
ADVANCED
FUNCTIONS
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT' button again.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
5 Press ENTER.
to normal play, press REPEAT again,
6 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER, then press the PLAY/PAUSE button.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT' button again.
26
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 40.
27
Selecting the Subtitle Language
Changing the Camera Angle
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the ANGLE button
Using the SUBTITLE button
1 Press the SUBTITLE button.
the LEFT/RIGHT buttons to select the
2 Use
desired subtitle language.
3
ENG
On
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
an ANGLE mark is shown, press the
1 When
ANGLE button, then an ANGLE select icon
Use the UP/DOWN buttons to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
will appear at the upper left hand corner of
the screen.
ENG
Off
the LEFT/RIGHT buttons to select the
2 Use
desired screen angle.
ADVANCED
FUNCTIONS
turn off the display, press the ANGLE
3 Tobutton
again.
Changing the Subtitle color
the MODE button to change the subtitle
1 Press
color to yellow or white when the player is in
progressive video mode only and subtitles are
on the screen.
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 40.
28
29
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
you press the I.REPLAY button, the current
1 Ifscene
moves backward about 10 seconds,
and plays back.
* Depending on the disc, the Instant Replay
function may not work.
Using the Bookmark Function
This feature lets you bookmark sections of a DVD so you can quickly find them at a later
time.
Using the Bookmark Function (DVD)
play, press the BOOKMARK button on the
1 During
remote. The Bookmark icons will be displayed.
the LEFT/RIGHT buttons to move to the
2 Use
desired bookmark icon.
you reach the scene you want to mark,
3 When
press the ENTER button. The icon will change to
ENTER
a number (1, 2, or 3).
Using the Instant Skip function (DVD)
1
Recalling a Marked Scene
Press the I.SKIP button.
play, press the BOOKMARK button
1 During
on the remote.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
the LEFT/RIGHT buttons to select a
2 Use
marked scene.
the PLAY/PAUSE (
3 Press
to the marked scene.
1 – –
ADVANCED
FUNCTIONS
Use this function to skip playback 10 seconds
ahead of the current scene.
the BOOKMARK button to turn off the
4 Press
display.
CLEAR
) buttons to skip
Clearing a Bookmark
play, press the BOOKMARK button
1 During
on the remote.
the LEFT/RIGHT buttons to select the
2 Use
bookmark number you want to delete.
the CLEAR button to delete a
3 Press
bookmark number. Press the BOOKMARK
NOTE
• Up to three scenes may be marked
at a time.
• Depending on the disc, the
Bookmark function may not work.
button to turn off the display.
30
31
Using the Zoom & 3D Sound Functions
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
Using the Zoom Function (DVD)
play or pause mode, press the ZOOM button
1 During
on the remote.
• If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
• To change the currently playing media, press the STOP ( )
button twice and then press the MENU button.
• If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
A zoom mark will be displayed on screen.
the UP/DOWN or LEFT/RIGHT buttons to select
2 Use
the part of the screen you want to zoom in on.
3 Press the ENTER button.
ENTER
MP3/WMA Play Function
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
the first song file is playing, the music
1 When
folder menu will appear on the right side of the
screen.
Up to 8 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the LEFT/RIGHT buttons to bring
them up on the screen.
Using the 3D Sound Function
ENTER
Off
RETURN
MENU
ADVANCED
FUNCTIONS
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work.)
the UP/DOWN buttons to select the
2 Use
desired music folder, then press ENTER.
Use the UP/DOWN buttons again to select a
song file. Press ENTER to begin playback of
the song file.
Program/Random playback
1
During play, press the 3D button.
The 3D SOUND mark will be displayed on
screen.
the UP/DOWN buttons to turn the
2 Press
3D Sound feature On or Off.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
Press the MODE button to switch between the
RANDOM and PROGRAM modes. See page 35
for more information on these modes.
PROGRAM
RANDOM
• Depending on the disc, the Zoom and
3D Sound functions may not work.
NOTE
• Press the REPEAT button to hear only music continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
32
33
MP3/WMA Play
Program Play & Random Play
Program Play (CD/MP3/WMA)
CD-R MP3/WMA discs
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows,
and with Apple's Mac. These two formats are the most widely used.
• When naming your MP3 or WMA files do not exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma. When composing your title, make sure that you use
8 characters or less, have no spaces in the name, and avoid the use of special characters including:
(.,/,\,=,+).
• Use a decompression transfer rate of at least 64Kbps when recording WMA files.
Sound quality with WMA files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below 64Kbps or over 192Kbps will not be played
properly.
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are
of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM
(registered trade mark of The SDMI Foundation). You cannot copy such files.
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will
play MP3 recordings, or as an assurance of sound quality.
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player (degraded sound quality and in some cases,
inability of the player to read the files).
• This unit can play a maximum of 500 files and 300 folders per disc.
34
PROGRAM
RANDOM
All discs in the unit will be read first.
the LEFT/RIGHT/UP/DOWN buttons to
3 Use
select the first track to add to the program.
Press the ENTER button. The selection
numbers appear in the Program Order box.
PROGRAM 01
Program Order
Track
4
Press the PLAY/PAUSE (
) button.
The disc will be played in programmed order.
01
05
09
13
02
06
10
14
03
07
11
15
------
04
08
12
16
------
------
------
• Use the DISC SKIP key to program another disc.
ENTER
RETURN
CLEAR
ADVANCED
FUNCTIONS
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you
choose. Getting audio CD quality sound requires an analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps
or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps will not be played properly.
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
PROGRAM. Press the ENTER button.
Random Play (CD/MP3/WMA)
1 Press the MODE button.
the LEFT/RIGHT buttons to select
2 Use
RANDOM. Press the ENTER button.
PROGRAM
RANDOM
LEFT/RIGHT buttons to select all discs or
3 Press
disc. The disc(s) will be played in random order.
NOTE
• Depending on the disc, the Program and Random Play functions may not work.
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed orders.
• Random play can only operate when the discs are the same type.
35
Picture CD Playback
Picture CD Playback
1 Open the disc tray.
2 Load the disc on the tray.
3 Close the tray.
CD-R JPEG Discs
- Load the disc with the labeled side up.
ENTER
- The tray closes and you should get a screen that looks like the
one to the right.
• Select JPEG in the menu to view a Photo CD.
• Use the UP/DOWN or LEFT/RIGHT buttons on the remote controller
to select the picture you want to view and then press the ENTER
button. (Press the PLAY/PAUSE (
) button if you want to play it in
the Slide Show mode.)
• To see the next 6 pictures, press the
• To see the previous 6 pictures, press the
•
ALBUM
PHOTO: 1 /215
button.
button.
: Return to the Album Screen.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote
controller to display the menu again.
ENTER
PHOTO: 1 /215
PHOTO:
PHOT
O: 1 /215
PHOTO: 1 /215
: Each time the ENTER button is pressed, the picture rotates
90 degrees clockwise.
•
: Each time the ENTER button is pressed, the picture is
enlarged up to 4X. (Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
ENTER RETURN
ADVANCED
FUNCTIONS
•
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces
or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the
multisession disc, the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
•
: The unit enters slide show mode.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
: When this icon is selected and ENTER is pressed, the
pictures change automatically with about an 6 second interval.
•
: The pictures change automatically with about an 12 second
interval.
TIMER:
ENTER RETURN
•
: The pictures change automatically with about an
18 second interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
• To change the currently playing media, press the STOP ( ) button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the menu will disappear and the selected
item will be played.
NOTE
• Press the TITLE MENU button to return to the album screen.
• Press the RETURN button to return to the slide show.
• If no buttons on the remote controller pressed for 10 seconds, the menu will disappear.
Press the UP/DOWN or LEFT/RIGHT buttons on the remote controller to display the menu again.
36
37
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of
television screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance,
they will come up automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop mode, press the MENU button
on the remote. Select Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
DVD
Disc Menu
Title Menu
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options
Display Setup : Setup of the Display Options
Use to select which type of screen you want to watch
and several display options.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
To make the setup screen disappear after setting up, press the
MENU button again.
NOTE
Depending on the disc, some Setup Menu selections may not work.
Setup
LANGUAGE
LANGU
GE SETUP
PLAYER
PLA
YER MENU LANGUAGE
LANGU GE
Player Menu
English
Français
Deutsch
Español
Italiano
Nederlands
- English is selected and the screen returns to SETUP menu.
- To make the SETUP menu disappear, press the RETURN or
LEFT button.
ADVANCED
FUNCTIONS
the UP/DOWN buttons on the remote to access
2 Use
the different features.
3 Press the ENTER button to access the sub features.
Function
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Player Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
e.g) Setting up in English.
Using the Disc Menu Language
This function changes the text language only on the disc
menu screens.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Language Setup using UP/DOWN buttons,
3 Select
then press the RIGHT or ENTER button.
Select Disc Menu using UP/DOWN buttons, then
4 press
the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
e.g) Setting up in English.
DISC MENU LANGUAGE
LANGU GE
Disc Menu
Others
- Select “Others” if the language you want is not listed.
- English is selected and the screen returns to SETUP menu.
38
39
Setting Up the Language Features
Setting Up the Audio Options
Using the Audio Language
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
AUDIO
UDIO LANGUAGE
LANGU GE
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Audio Setup using UP/DOWN buttons, then
3 press
the RIGHT or ENTER button.
Audio
Original
Others
4
5 Press the UP/DOWN buttons to select ‘English’.
Select Audio using UP/DOWN buttons, then press
the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
- Select “Original” if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
6 Press the ENTER button.
NOTE
- English is selected and the screen returns to SETUP menu.
1
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Language Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
Select Subtitle using UP/DOWN buttons, then press
4 the
RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select ‘English’.
6 Press the ENTER button.
: PCM
DTS
: Off
Dynamic Compression : On
PCM Down Sampling : On
Be sure to select the correct Digital Output or
no audio will be heard.
DTS
With the unit in Stop mode, press the MENU button.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
Digital Output
ADVANCED
FUNCTIONS
Using the Subtitle Language
AUDIO SETUP
SUBTITLE LANGUAGE
LANGU GE
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Automatic
Dynamic Compression
Subtitle
1. On : To select dynamic compression.
2. Off : To select the standard range.
Others
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP menu
disappear or return to menu screen
during set up; Press RETURN or
LEFT button.
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
- English is selected and the screen returns to SETUP menu.
40
41
Setting Up the Display Options
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Display Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
the UP/DOWN buttons to select the desired
4 Use
item. Then press the RIGHT or ENTER button.
TV Aspect
DISPLAY
DISPLA
Y SETUP
TV Aspect
: Wide
Still Mode
: Auto
Screen Massages
: On
Front Display
Black Level
: Auto Dim
: On
Still Mode
Screen Messages
TV ASPECT
Front Display
Black Level
4:3 Letter Box
4:3 Pan Scan
TV Aspect
Depending on the type of television you have, you may want to adjust the screen
setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central portion of
the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display small text
clearer.
1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
2. Field : Select this feature when the screen shakes in the Auto mode.
3. Frame : Select this feature when you want to see small letters more clearly in the
Auto mode.
16:9 Wide
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On/Off)
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press the RETURN or LEFT button.
42
43
CHANGING
SETUP MENU
Front Display
Adjust the brightness of the unit’s front panel display.
1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
2. Bright : Makes the Front Panel Display bright.
3. Dim : Makes the Front Panel Display dim.
Setting Up the Parental Control
Troubleshooting
The Parental Control function works in conjunction with DVDs that have been assigned
a rating - which helps you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1 With the unit in Stop mode, press the MENU button.
Setup using UP/DOWN buttons, then RIGHT
2 orSelect
ENTER button.
Select Parental Setup using UP/DOWN buttons,
3 then
press the RIGHT or ENTER button.
RIGHT or ENTER to select Yes if you want to
4 Use
use a password. The Enter Password screen
Before requesting service (troubleshooting), please check the following.
Problem
Page
No operations can be
performed with remote.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
P5
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P8
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
P14
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P17
PARENT
ARENTAL
AL SETUP
Use Password
: No
appears.
your password. The Re-enter Password
5 Enter
screen appears to confirm the password.
ENTER
RETURN
MENU
The
icon appears on
screen.
Enter your password again.
The Parental Control screen appears.
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use UP/DOWN to
select No. Use RIGHT or ENTER to select Rating
level. Press ENTER.
Action
CREATE
CREA
TE PASSW
PASSWORD
ORD
Enter Password
- - - -
P41
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
P38~39
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
P39~44
- Use UP/DOWN to select the level( e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use RIGHT or ENTER to select No in
Use Password.
The screen ratio cannot
be changed.
• The Screen Ratio is fixed on your DVDs.
P42~43
About the Change Password ;
Forgot password
0~9
RETURN
No audio.
- Use UP/DOWN to select Change Password.
Press ENTER. The Change Password screen appears.
- Enter your new password. Re-enter the new password again.
e.g) Setting up in LEVEL6.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P41
• Press power on from a cold start with no disc in the unit. Press the
STOP ( ) and PLAY (
) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.
P44
REFERENCE
RATING
RA
TING LEVEL
NOTE
• How to make the SETUP menu disappear or return to
menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide.
44
Level 8 Adult
Level 7
Level
Le
vel 6
Level
Le
vel 5
Level
Le
vel 4
Level
Le
vel 3
Level
Le
vel 2
Level
Le
vel 1 Kids Safe
Saf
If you experience other
problems.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
45
Specifications
General
Power Requirements
AC 120 V, 60 Hz
Power Consumption
12 W
Weight
9.5 lbs
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
CD : 5"
(COMPACT DISC)
CD : 31/2"
(COMPACT DISC)
(W) 16.9 in x (D) 15.7 in x H 2.7 in
+41°F to +95°F
Reading Speed : 11.45 ft/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Component Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
S-VIDEO
2 Channel
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty
period:
10 % to 75 %
Composite Video
Video
Output
Audio
Output
Warranty
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
100 dB
0.004 %
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
One (1) Year Parts and Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used
in the United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs
must be performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated
bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized
service center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if
found to be defective during the limited warranty period specified above. The product must be returned during
the warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to
returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination
and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage
which occurs in shipment; applications and uses for which this product was not intended; failures or problems
which are caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect,
misapplication, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with
altered serial numbers; failure to follow operating instructions, customer adjustments, maintenance and
environmental instructions that are covered and prescribed in the instruction book; use of non-SAMSUNG or
unauthorized parts, supplies, accessories or equipment which damage this product or result in service problems;
failures or problems due to incompatibility with other equipment.
REFERENCE
46
47