HP ZR22w 21.5-inch S-IPS LCD Monitor
Overview - HP ZR22w 21.5-inch S-IPS LCD Monitor
Menu: Opens, selects or exits the OSD menu.
Minus (-): Navigates backward through the OSD menu and 5.
decreases adjustment levels.
Plus (+)/Source: Navigates forward through the OSD menu 6.
and increases adjustment levels; when the OSD menu is
inactive, selects the video input (VGA or DVI or DisplayPort)
OK/Auto: When the OSD menu is inactive, activates the auto
adjustment feature to optimize the screen image.
Power: Turns the monitor on or off.
Power LED:
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode
ZR22w Bezel Buttons
VM626A4 (single unit)
DA - 13556
North America — Version 2 — April 2, 2010
Page 1
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
On Screen Display
(OSD) Controls
Signal Interface/
Viewable Image Area
Screen Opening
(W x H)
Panel Type
Aspect Ratio
Viewing Angle (typical)
Brightness (typical)*
Contrast Ratio (typical)*
Wide-Aspect Active Matrix TFT (thin film transistor)
54,61 cm (21.5 in) widescreen; diagonally measured
47,5 x 29,8 cm (18.87 x 11.7in)
S-IPS (UH-IPS technology for improved energy efficiency)
1920 x 1080, Full HD
Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)
250 nits (cd/m2)
1000:1, 3000:1 DCR (Dynamic Contrast Ratio)
Response Time (typical)* 8 ms (gray to gray), 16 ms (on/off)
0.2475 mm
Pixel Pitch
50K hours
Backlight Lamp Life
(to half brightness)
16.7 million colors
Color Support
82% (CIE 1976)
Color Gamut
Size vs. NTSC
96% (CIE 1931), 90% (CIE 1976)
Coverage of sRGB
*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
OSD menu select, OSD down, OSD UP/Source, OK/auto, power
Buttons or Switches
English, French, German, Spanish, Italian, Dutch, Japanese, S. Chinese, T.
Chinese, and Brazilian Portuguese
Brightness, contrast, OSD control, color temperature (5000k, 6500k (sRGB),
User Controls
9300k, custom), individual color control, information, video input control,
clock, clock phase, monitor management, factory reset
24 to 94 KHz (DVI input for modes with pixel clock less than 165MHz)
Horizontal Frequency
50 to 76 Hz (DVI input for modes with pixel clock less than 165 MHz)
Vertical Frequency
1920 x 1080 @ 60 Hz, 2.1 Million pixels
Native Resolution
1920 x 1080 @ 60 Hz
Preset VESA Graphic
Modes (non-interlaced) 1680 x 1050 @ 60 Hz
1600 x 1200 @ 60 Hz
1440 x 900 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 960 @ 60 Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60 Hz
800 x 600 @ 60 Hz
640 x 480 @ 60 Hz
720 x 400 @ 70 Hz
Text Mode
200 MHz (analog input); 165 MHz (DVI input & DP input)
Maximum Pixel Clock
DA - 13556
North America — Version 2 — April 2, 2010
Page 2
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
Video/Other Inputs
User Programmable
Default Color
Plug and Play
Self Powered USB 2.0
USB Cable Length
Input Connectors
Input Impedance
Sync Input
DVI-D Video Cable
DisplayPort Video Cable
Input Power
Typical Power
Power Saving
Power Cable Length
Dimensions (H x W x D)
Ergonomic Features
8-Way Comfort Adjust
HP Quick Release
DA - 13556
Yes, 20
6500 K
One upstream, four downstream ports (cable included)
1,8 m (5.9 ft)
1 DisplayPort connector, 1 DVI-D connector, 1 VGA connector, HDCP
support on DisplayPort and DVI.
75 ohms ± 10%
Separate sync (HSYNC/VSYNC)
1,8 m (5.9 ft)
1,8 m (5.9 ft)
Auto-Sensing, 100 to 240 VAC, 50 +/-3 Hz to 60 +/-3 Hz)
47.5 to 63 Hz
33.5 watts (120VAC, USB ports 25% of maximum load)
< 44 watts
< 1 watt sleep mode, < 1 watt off
1,9 m (6.2 ft)
Unpacked w/stand
36,7 to 45,7 x 50,7 x 23,0 cm
(14.4 to 18.0 x 20.0 x 9.1 in)
Unpacked w/o stand
30,3 x 50,7 x 6,4 cm
(head only)
(11.9 x 20.0 x 2.5 in)
Packaged (single)
39,4x 57,1x 31,6 cm
(15.5 x 22.5 x 12.4 in)
Packaged (quad head
Unpacked w/stand
7,24 kg (15.9 lb)
Unpacked w/o stand
4,26 kg (9.4lb)
(head only)
Packaged (single)
9,66 kg (21.3lb)
Easily adjust the display in height, tilt, swivel and pivot for maximum comfort.
Eight degrees of adjustment freedom including height up/down, tilt
forward/back, swivel left/right and pivot portrait/landscape.
Ultra convenient set up. Easily mount and detach the display head from the
North America — Version 2 — April 2, 2010
Page 3
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
Cable Management
Environmental Data
Enhanced cable management for easy concealment of power, video and USB
cables. Effortless routing of cables through the base of the column with
removable cover plate.
Detachable Stand
Stand ships detached and easily attaches with the HP Quick Release.
Tilt Range
-5° to + 30° vertical
Swivel Range
-45° to + 45°
Height Adjustable
Yes, range 9,0 cm (3.5 in)
Pivot Rotation
Temperature - Operating 5° to 35° C (41° to 95° F)
Temperature - Non-20° to 60° C (-4° to 140° F)
Humidity - Operating
Humidity - Nonoperating
Altitude - Operating
Altitude - Non-operating
Energy Certifications and
20% to 80% non-condensing
5% to 95%, 38.7° C max wet-bulb
+5,000 m (16,400 ft)
+12,192 m (40,000 ft)
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these marks:
EPEAT® - Gold
IT ECO declaration
Korea Eco-label
CEL Level 2
Energy Consumption
(in accordance with US
Energy Star test method)
Normal Operation
Heat Dissipation*
Normal Operation
Additional Information
DA - 13556
115VAC, 60Hz
26.7 W
0.76 W
0.72 W
230VAC, 50Hz
26.5 W
0.81 W
0.76 W
100VAC, 60Hz
26.7 W
0.77 W
0.72 W
115VAC, 60Hz
230VAC, 50Hz
100VAC, 60Hz
91 BTU/hr
91 BTU/hr
91 BTU/hr
3 BTU/hr
3 BTU/hr
3 BTU/hr
2 BTU/hr
3 BTU/hr
2 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the
service level is attained for one hour.
This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT®) standard at
the gold where HP registers commercial display products. See
North America — Version 2 — April 2, 2010
Page 4
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
RoHS Compliance
Material Usage
http://www.epeat.net for registration status in your country
Plastics parts weighing over 25 grams used in the product are marked
per ISO 11469 and ISO1043.
This product contains 15.9 % post-consumer recycled plastic (by wt.)
This product is 98.6 % recycle-able when properly disposed of at end
of life.
Packaging Materials
Corrugated Carton 1200 g
CANON bags 12 g
several layers
EPS (Expanded
380 g
Hewlett-Packard is committed to compliance with all applicable
environmental laws and regulations, including the European Union Restriction
of Hazardous Substances (RoHS) Directive. HP's goal is to exceed compliance
obligations by meeting the requirements of the RoHS Directive on a worldwide
basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually
= to levels below legal limits) for all HP electronic products subject to the
RoHS Directive, except where it is widely recognized that there is no
technically feasible alternative (as indicated by an exemption under the EU
RoHS Directive).
This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the Environment at:
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Chlorinated Hydrocarbons
Chlorinated Paraffins
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) - except for wires and cables, and certain
retail packaging has been voluntarily removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
DA - 13556
North America — Version 2 — April 2, 2010
Page 5
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
HP follows these guidelines to decrease the environmental impact of product
Eliminate the use of heavy metals such as lead, chromium, mercury
and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
Plastic packaging materials are marked according to ISO 11469 and
DIN 6120 standards.
End-of-life Management Hewlett-Packard offers end-of-life HP product return and recycling programs
and Recycling
in many geographic areas. To recycle your product, please go to:
http://www.hp.com/go/reuse-recycle or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/recyclers. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
For more information about HP's commitment to the environment:
Corporate Environmental
Global Citizenship Report
Eco-label certifications
ISO 14001 certificates:
85% power supply efficiency
Energy Saving Features
Power Saving 2-lamp CCFL backlight
HP LiteSaver Software to enable user to schedule monitor power down
on programmable schedule.
HP WattSaver technology that reduces standby power to less than 1
HP LCD Speaker Bar-Part Powered directly by the monitor or the PC, the Speaker Bar seamlessly
number NQ576AA
attaches to the monitor's lower bezel to bring full audio support to select HP
LCD monitors. Features include dual speakers with full sound range and
external jack for headphones. Sold separately. For more information, refer to
the product's QuickSpecs.
DA - 13556
North America — Version 2 — April 2, 2010
Page 6
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP ZR22w 21.5-inch S-IPS LCD Monitor
HP USB Graphics
Adapter-Part number
Certification and
Service and Warranty
Enables connection of up to six simultaneous displays to help you boost
productivity and multi-task across several open applications. Use one Adapter
to bridge between a notebook or desktop PC and second monitor or use
multiple Adapters to connect several displays to each other.
HP Business PC Security Attaches to the rear of the PC with a six-foot steel cable that can be used to
Lock Kit-Part number
secure a PC or peripherals such as mice, keyboards, monitors or USB security
devices to protect them against unauthorized removal by physically
connecting the system to an anchor point.
Accessories Included
VGA Cable, DVI cable, DisplayPort cable, USB cable, power cable (single
HP Display Assistant is a software utility that enables theft deterrence and
allows monitor adjustment, color calibration, and security/asset management
using the Display Data Channel Command Interface (DDC/CI) protocol of
the connected PC or workstation.
User Guide Languages English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese,
Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish,
Greek, Polish, Russian, Slovenian, Turkish
Warranty Languages
English, Canadian French, LA Spanish, Brazilian Portuguese, Danish,
German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish,
Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese
All carbonite
VESA External Mounting Yes, standard 4 hole pattern, 100 mm
Security Lock-Ready
Yes, one slot available
TCO 5.0 Displays, ISO 13406-2 VDT Guidelines Approval, CISPR Requirements, VCCI Approvals, MIC
(Korean) Requirements, CSA, Australian ACA Approval, "GS" Mark, TUV Approvals, CE Marking, FCC
Approval, ENERGY STAR® qualified, Microsoft® Windows® Certification (Microsoft® Windows® 98,
Microsoft Windows 2000, Microsoft Windows XP, Windows Vista® Premium, and Windows 7), EPEAT®
Compatible with platforms using the VESA standard video modes. Recommended for use with HP
Protected by HP, including a 3 years parts, 3 years labor, and 3 years onsite service (3/3/3) standard
limited warranty. Certain restrictions and exclusions apply.
* HP Care Pack Services extend service contracts beyond the standard warranties. Service starts from date
of hardware purchase. To choose the right level of service for your HP product, use the HP Care Pack
Services Lookup Tool at: www.hp.com/go/lookuptool. Additional HP Care Pack Services information by
product is available at: www.hp.com/hps/carepack. Service levels and response times for HP Care Packs
may vary depending on your geographic location.
DA - 13556
North America — Version 2 — April 2, 2010
Page 7
HP ZR22w 21.5-inch S-IPS LCD Monitor
Overview - HP LCD Monitor Quick Release
HP LCD Monitor Quick Release
1. Release/locking
2. Four 100 mm VESA mount screw
3. Mounting holes for attachment to back
of monitor stands
Four 100 mm VESA mount screw holes 1. Locking pin screw
2. Locking pin hole on release/locking
The HP Quick Release, which ships standard with the HP ZR22w 21.5-inch Widescreen LCD Monitor, is an easy to use, 100 mm
VESA-compliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety
of stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are
compatible with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor
(or mounted device) securely in place, and can be further secured with a theft-deterrent security screw.
DA - 13556
North America — Version 2 — April 2, 2010
Page 8
HP ZR22w 21.5-inch S-IPS LCD Monitor
Overview - HP LCD Monitor Quick Release
Uniquely flexible product configurations
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as:
Storefronts/kiosks: Mount LCD monitors for easy viewing and add touchscreens for interactivity.
Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of
the day.
Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas.
Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Thin Client for all-in-one convenience.
Medical/institutional settings: Securely mount monitors in nursing stations and public areas.
Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or
DA - 13556
North America — Version 2 — April 2, 2010
Page 9
HP ZR22w 21.5-inch S-IPS LCD Monitor
Technical Specifications - HP LCD Monitor Quick Release
Additional components
Dimensions (H x W x D)
19,8 x 15,9 x 3,8 cm (7.8 x 6.25 x 1.5 in)
16 x 13,2 x 1,65 cm (6.3 x 5.2 x 0.65 in)
0,49 kg (1.1 lb)
0.37 kg (0.82 lb)
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
1. No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
2. The Quick Release device is not to be used between a monitor screen and its stand unless
provided that way from the factory.
3. Under no circumstances is the Quick Release device intended to be used in an orientation where
the Release/Lock lever is oriented downward.
Supported weight capacity The HP Quick Release has been designed to support a maximum of up to 10.9 kg (24 lbs) depending
upon the mounting configuration used. Please note this is a total weight limit for all devices mounted,
i.e. the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed
24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration
may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends
that you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that
your mounting solution is properly installed to support applied loads.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies. ENERGY STAR is a registered mark
owned by the U.S. government.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13556
North America — Version 2 — April 2, 2010
Page 10
Download PDF
Similar pages
HP ZR22w
HP ZR22w
HP ZR22w - Hewlett
HP ZR30w 30-inch S