Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
User manual
BT2110
Contents
1Important
2
Safety2
2 Your micro system
3
Introduction3
What's in the box
3
Overview of the main unit
4
Overview of the remote control
5
3 Get started
6
6
6
6
6
7
4Play
8
8
8
8
8
5 Use the Bluetooth devices
9
9
9
Connect power
Demonstrate the features
Prepare the remote control
Set clock
Turn on
Play from USB
Control play
Skip to a track
Program tracks
Play from Bluetooth-enabled devices
Connect a device through NFC
6 Listen to the radio
11
11
11
11
11
7 Other features
12
12
12
12
12
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
Set the alarm timer
Set the sleep timer
Adjust the display brightness
Listen to an external device
8 Product information
13
13
13
9Troubleshooting
15
Specifications
USB playability information
10Notice
17
Compliance17
Important notes for users in the U.K.
17
Care of the environment
17
Trademark notice
18
EN
1
1Important
Safety
Safety
Warning
•• Never remove the casing of this apparatus.
•• Never lubricate any part of this apparatus.
•• Never look into the laser beam inside this apparatus.
•• Never place this apparatus on other electrical
equipment.
•• Keep this apparatus away from direct sunlight, naked
flames or heat.
•• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the apparatus from
the power.
•
•
•
•
•
The device shall not exposed to dripping
or splashing.
Do no place any source of danger on the
device (e.g. liquid filled objects. lit candles).
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Make sure that there is enough free space
around the product for ventilation.
Only use attachments/accessories specified
by the manufacturer.
Warning
•• Never remove the casing of this device.
•• Never lubricate any part of this device.
•• Never place this device on other electrical equipment.
•• Keep this device away from direct sunlight, naked
flames or heat.
•• Never look into the laser beam inside this device.
•• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
2
EN
2 Your micro
system
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio Bluetooth-enabled devices,
NFC enabled devices, USB storage devices,
or other external devices;
• listen to FM radio stations.
You can enrich sound output with below
sound effect:
• Digital Sound Control (DSC)
• DSC 1: Balanced
• DSC 2: Clear
• DSC 3: Powerful
• DSC 4: Warm
• DSC 5: Bright
The unit supports these media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• Remote control (with one AAA battery)
• AC power cord
• AC power cord(UK)
• Short user manual
• Safety and notice
EN
3
Overview of the main unit
k
a
j
b
i
h
c
g
f
d
e
a
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
b SOURCE
• Select a source: USB, BT, AUDIO IN
or FM.
c
• Stop play or erase a program.
d Display panel
• Show current status.
e Bluetooth indicator
• Show Bluetooth status.
f
/
• Skip to the previous/next track.
• Select a preset radio station.
g VOLUME +/• Adjust volume.
h
• Jack for a USB device.
i AUDIO IN
• Audio input jack (3.5mm) for an
external audio device.
j NFC tag
• Connect to a device with NFC feature.
4
EN
k
l
• Start, pause, or resume play.
l AC MAIN~
• Power supply socket.
f VOL +/• Adjust volume.
Overview of the remote
control
g MUTE
• Mute or restore volume.
a
WOOFER
b
c
r
h TIMER
• Set the alarm timer.
q
i CLOCK
• Set the clock.
• View clock information.
p
j SLEEP
• Set sleep timer.
AUDIO IN
FM
PRESET/ALBUM
d
e
REPEAT
f
SHUFFLE
g
h
i
MUTE
DISPLAY
PROG
TIMER
CLOCK
SLEEP
o
n
m
l
k
j
k PROG
• Program tracks.
• Program radio stations.
• Auto store FM radio stations.
l DISPLAY
• Adjust display brightness.
m SHUFFLE
• Play tracks randomly.
n
a
o REPEAT
• Play a track or all tracks repeatedly.
• Turn the unit on or off.
• Switch to standby mode or Eco power
standby mode.
b USB
• Select USB source.
c /FM
• Select Bluetooth source.
• Select FM source.
d PRESET/ALBUM /
• Select a preset radio station.
• Skip to previous/next album.
e
• Stop play or erase a program.
•
•
•
•
p
• Start, pause, or resume play.
q AUDIO IN
• Select AUDIO IN source.
r SOUND/WOOFER
• Press to select sound effect with Digital
Sound Control (DSC).
• Press and hold to adjust the volume of
the woofer.
/
Skip to the previous/next track.
Search within a track/disc/USB.
Tune to a radio station.
Adjust time.
EN
5
3 Get started
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Demonstrate the features
In the standby mode, you can demonstrate
features by pressing .
»» The features are displayed one by one
across the display panel.
• To turn off the demonstration, press
again.
Prepare the remote control
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Risk of decreased battery life! Never mix different
brands or types of batteries.
Connect power
Caution
•• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•• Before you connect the AC power cord, ensure that
you have completed all other connections.
•• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
2
3
Open the battery compartment.
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
Close the battery compartment.
Set clock
1
2
3
6
EN
In standby mode, press and hold CLOCK
on the remote control for more than two
seconds.
»» [24H] or [12H] hour format is
displayed.
Press
/
to select [24H] or [12H]
hour format.
press CLOCK to confirm.
»» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•• You can view clock information in power-on mode by
pressing CLOCK.
Turn on
Press .
»» The unit switches to the last selected
source.
Switch to standby mode
Press again to switch the unit to standby
mode.
»» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
Press and hold for more than two seconds.
»» The display panel is dimmed.
Note
•• The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
Switch between standby mode and ECO
standby mode:
Press and hold for more than two seconds.
EN
7
4Play
Skip to a track
For USB:
Play from USB
1
2
Press
Press
/
to select an album or a folder.
/
to select a track or a file.
Note
•• Make sure that the USB device contains playable audio
content.
1
2
Press USB to select the USB source.
Insert a USB device into the
socket.
»» Play starts automatically. If not, press
.
Program tracks
You can program a maximum of 20 tracks.
1
2
3
4
5
Press PROG to activate the program
mode.
For MP3 tracks, press
album.
/
to select an
Press
/
to select a track, and then
press PROG to confirm.
Repeat steps 2-3 to program more tracks.
Press
to play the programmed tracks.
»» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Control play
/
/
REPEAT
SHUFFLE
VOL +/MUTE
SOUND
WOOFER
DISPLAY
8
EN
Select a folder.
Skip to the previous or next track.
Press and hold to rewind a track
or search forward fast.
Pause or resume play.
Stop play.
Play a track or all tracks
repeatedly.
Play tracks randomly.
Increase or decrease the volume.
Mute or restore sound.
Enrich sound effect with DSC:
balanced, clear, powerful, warm,
and bright.
Enable the woofer.
Adjust display brightness.
5 Use the
Bluetooth
devices
3
4
Play from Bluetooth-enabled
devices
Select 'Philips BT2110 on your Bluetooth
enabled device and if necessary input
'0000' as the paring password.
»» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the speaker beeps twice.
Play audio on the connected device.
»» Audio streams from your Bluetooth
enabled device to this unit.
Tip
Note
•• The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•• Any obstacle between the system and the device can
reduce the operational range.
•• Compatibility with all Bluetooth devices is not guaranteed.
•• The micro music system can memorize up to 8
previously connected Bluetooth devices.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range.
To clear Bluetooth pairing history:
• Pressand hold
on the main set for 10
seconds.
»» The current Bluetooth connection is
disconnected.
»» After successful clearing, beep sounds
Connect a device through
NFC
Philips BT2110
1
2
Press SOURCE repeatedly to select the
Bluetooth source.
»» [BT] (Bluetooth) is displayed.
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this micro music system easily.
1
»» The Bluetooth indicator flashes blue.
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
2
Enable the NFC feature on your Bluetooth
enabled device (see the user manual of the
device for details).
Touch the NFC tag on the top of the
micro music system with back of your
Bluetooth device.
EN
9
3
4
On your Bluetooth device, accept the
pairing request with "BT2110". If necessary,
input "0000" as the pairing password.
Follow the on-screen instructions to
complete the pairing and connection.
»» After successful pairing and connection,
the micro music system beeps twice
and the Bluetooth indicator turns solid
blue.
NFC
Note
•• In standby/ECO standby mode or FM/USB/AUDIO
IN mode, when touching the NFC tag with the back
of your NFC enabled device, the micro music system
automatically switches to BT mode.
LED indicator
Description
Flashing blue
Connecting or waiting for
connection
Connected
Solid blue
10
EN
6 Listen to the
radio
Tune to a radio station
Tip
Program radio stations
manually
1
2
3
•• Position the antenna as far as possible from TV, VCR, or
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
1
2
3
Press FM/ repeatedly to select the FM
source.
Press and hold
/
for more than two
seconds.
»» The radio tunes to a station with
strong reception automatically.
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/
repeatedly until you find optimal
reception.
4
Tune to a radio station.
Press PROG, and then press
select a number from 1–20.
/
to
Press PROG to confirm.
»» The preset number and the frequency
of the preset station are displayed.
Repeat steps 2-3 to program more
stations.
Note
•• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press
number.
/
to select a preset
Program radio stations
automatically
Note
•• You can program a maximum of 20 preset radio
stations (FM).
In tuner mode, press and hold PROG for
more than two seconds to activate automatic
programming.
»» All available stations are programmed
in the order of waveband reception
strength.
»» The first programmed radio station is
broadcast automatically.
EN
11
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select USB, or FM as alarm source.
•• Make sure that you have set the clock correctly.
2
3
4
To set the sleep timer, in turn on mode, press
SLEEP repeatedly to select a set period of time
(in minutes).
»» When sleep timer is activated, is
displayed. Otherwise, disappears.
Adjust the display brightness
Press DISPLAY repeatedly to adjust the display
brightness.
Note
1
Set the sleep timer
Listen to an external device
In standby mode, press and hold TIMER
for more than two seconds.
»» The hour digits are displayed and begin
to blink.
You can listen to an external device through this
music system with an audio in cable.
Press
2
/
repeatedly to set hour.
Press TIMER to confirm.
»» The minute digits are displayed and
begin to blink.
Repeat steps 2-3 to set minute, select a
source (USB, or FM), and adjust volume.
1
Press AUDIO IN to select AUDIO IN
source.
Connect an audio in able (not supplied)
between:
• AUDIO IN jack (3.5 mm) on the
music system,
• and the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
Note
AUDIO IN
WOOFER
•• If no button is pressed in 90 seconds, the system exits
AUDIO IN
PRESET/ALBUM
timer setting mode automatically.
REPEAT
SHUFFLE
MUTE
DISPLAY
PROG
TIMER
CLOCK
SLEEP
To activate or deactivate the alarm timer:
Press TIMER repeatedly to activate or
deactivate the alarm.
»» If timer is activated, is displayed.
AUDIO IN
Tip
•• If USB source is selected, but no USB connected, the
system switches to the tuner source automatically.
12
EN
8Product
information
Note
•• Product information is subject to change without prior
notice.
Specifications
USB Direct Version
USB 5 V Power
Maximum Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Aux Input
80 W
60 Hz - 16 kHZ;
±3 dB
>70 dBA
<1%
600 mV RMS
Speakers
Speaker Sensitivity
2 x 8 ohm + 4 ohm
2.75" full range + 5.25''
sub woofer
>83 dB/m/W
Bluetooth
Bluetooth Version
Bluetooth Frequency
Band
Bluetooth Range
Tuner Tuning Range
Tuner Tuning grid
Tuner Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
87.5-108 MHz
50 KHz
<22 dBf
<45 dBf
<30 dBf
<3%
>45 dBA
USB
Amplifier
Speaker Impedance
Speaker Driver
Tuner (FM)
V2.1 + EDR
2.4 GHz ~ 2.48 GHz
ISM Band
10 m (free space)
2.0 full speed
≤ 1A
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
Dimensions (W x H
x D)
Weight
100-240 V~, 50/60 Hz
40 W
<0.5 W
160 x 850 x 208 mm
10.2 kg
USB playability information
Compatible USB devices:
• USB flash memory (USB2.0 or USB1.1)
• USB flash players (USB2.0 or USB1.1)
• memory cards (requires an additional card
reader to work with this unit)
Supported USB formats:
• USB or memory file format: FAT12, FAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
• Directory nesting up to a maximum of 8
levels
• Number of albums/ folders: maximum 99
• Number of tracks/titles: maximum 999
EN
13
•
File name in Unicode UTF8 (maximum
length: 32 bytes)
Unsupported USB formats:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
• Unsupported file formats are skipped. For
example, word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
• WMA, AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
14
EN
9Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Make sure that the AC power cord of the
device is connected properly.
•• Make sure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
•• Check that the speakers are connected
correctly.
•• Check if the stripped speaker wires are
clamped.
No response from the unit
•• Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
•• Aim the remote control directly at the
sensor on the front of the unit.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the unit and
your TV or VCR.
•• Fully extend the FM antenna.
Music playback is unavailable on this unit even
after successful Bluetooth connection.
•• The device cannot be used to play music
through this unit wirelessly.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Bluetooth cannot be connected with this unit.
•• The device does not support the profiles
required for this unit.
•• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•• This unit is not in pairing mode.
•• This unit is already connected with another
Bluetooth-enabled device. Disconnect that
device and then try again.
The paired mobile device connects and
disconnects constantly.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
•• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of this unit.
•• For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this unit.
EN
15
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
16
EN
10Notice
Any changes or modifications made to this
device that are not expressly approved by
WOOX Innovations may void the user’s
authority to operate the equipment.
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Compliance
Hereby, WOOX Innovations declares that this
product is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC. You can find the
Declaration of Conformity on www.philips.com/
support.
Important notes for users in
the U.K.
This information applies only to products with a
UK mains plug.
This product is fitted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
EN
17
Trademark notice
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by WOOX
Innovations is under license.
© 2014 CSR plc and its group companies.
The aptX® mark and the aptX logo are
trade marks of CSR plc or one of its group
companies and may be registered in one or
more jurisdictions.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Note
•• The type plate is located on the back of the device.
18
EN
EN
19
Specifications are subject to change without notice.
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
BT2110_10_UM_V1.0