QuickSpecs
HPE ProLiant ML110 Gen10 Server
Overview
HPE ProLiant ML110 Gen10 Server
The HPE ProLiant ML110 Gen10 delivers a performance that meets the growing needs of the SMB. The server is a single
processor, 4.5U Tower Server that is designed to provide enterprise class features such as redundancy, reliability, and
manageability. The server delivers the right size Tower with performance and expandability that covers a wide range of applications
and workloads and addresses our customers from SMB to enterprise class server ROBO environments. Accelerate your business
with this right-sized compute.
Front View (details for 8LFF and 16SFF)
1. Drive Cage 1
3. Optical drive (optional)
5. Health LED
7. USB 3.0 (2) connectors
2.
4.
6.
8.
Drive Cage 2 (optional)
Power button/ LED
NIC status LED
iLO Service Port
Page 1
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Overview
Rear View
1. PCIe3.0 Slots (Slots 1-5)
3. USB 2.0 (2) connectors
5. Video connector
7. Power supply bay
9. iLO management port
2.
4.
6.
8.
10.
USB 3.0 (2) connectors
Network RJ-45 ports (2)
UID button/LED
Power supply power connection
Serial port (optional)
Page 2
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Overview
Internal View
1. System Fan (92x32mm default)
3. Six (6) DDR4 DIMM slots
5. Front Bezel Lock
7. X4 SATA Port 1 (1-4)
9. Front USB 3.0 connector
11. SATA Port 10
13. Five (5) PCIe3.0 expansion slots
15. Internal USB 3.0 connector
2.
4.
6.
8.
10.
12.
14.
Power Supply
One (1) processor and heatsink
X4 SATA Port 2 (5-8)
PCIe fan (92x32mm default)
SATA Port 9
MicroSD slot
Internal USB 2.0 connector
Page 3
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Overview
What’s New:
•
Intel® Xeon® Scalable processors , up to 14 cores, up to 105W
•
Redundant Fan Kit (optional)
•
Support up to 8 LFF NHP SATA HDDs
•
iLO Service Port
•
Serial Port (optional)
•
HPE DDR4 SmartMemory up to 2666 MT/s (supported by processor model.)
•
Security features: iLO 5 (Security Root of Trust)
Page 4
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Platform Information
Platform Information
Form Factor
Tower (4.5U)
NOTE: Sliding Shelf - 874578-B21 is optional to support rack form factor.
System Fans
1 Default system fan module (92 x 32 mm)
1 Default PCIe fan module (92 X 32 mm)
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W
Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This
condition is indicated by a flashing amber Health LED.
4. When the system requirements are to meet the A3 extended operating environment.
Page 5
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Standard Features
Processors – One of the following depending on model.
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel Xeon Models
CPU
Frequency
Cores
L3 Cache
Power
UPI
DDR4
Memory
per socket
Gold Processors
Gold 5122 Processor
3.6 GHz
4
16.50 MB
105W
2 @ 10.4 GT/s 2666 MT/s
192 GB
Gold 5120 Processor
2.2 GHz
14
19.25 MB
105W
2 @ 10.4 GT/s 2400 MT/s
192 GB
Silver Processors
Silver 4112 Processor
2.6 GHz
4
8.25 MB
85W
2 @ 9.6 GT/s
2400 MT/s
192 GB
Silver 4110 Processor
2.1 GHz
8
11.00 MB
85W
2 @ 9.6 GT/s
2400 MT/s
192 GB
Silver 4108 Processor
1.8 GHz
8
11.00 MB
85W
2 @ 9.6 GT/s
2400 MT/s
192 GB
Bronze Processors
Bronze 3106 Processor
1.7 GHz
8
11.00 MB
85W
2 @ 9.6 GT/s
2133 MT/s
192 GB
Bronze 3104 Processor
1.7 GHz
6
11.00 MB
85W
2 @ 9.6 GT/s
2133 MT/s
192 GB
NOTE: Gold – 5100 Series - Supports 6-Channel DDR4 @ 2400 MHz (SKU 5122=supports 2666) providing up to 192 GB
memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA) (SKU
5122 supports 2x 512 bit FMA), 48 lanes PCIe 3.0, advanced RAS supported.
NOTE: Silver – 4100 Series -6-Channel DDR4 @ 2400 MHz providing up to 192 GB memory capacity. Intel Turbo Boost
Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.
NOTE: Bronze – 3100 Series - Supports 6-Channel DDR4 @ 2133 MHz providing up to 192GB memory capacity. Intel AVX512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.
Chipset
Intel C621 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
On System Management Chipset
HPE iLO 5 ASIC
NOTE: Read and learn more in the iLO QuickSpecs.
Memory
Type:
HPE SmartMemory and Standard Memory
DDR4 Registered (RDIMM)
6
DIMM Slots Available
6 DIMM slots per processor, 6 channels per processor, 1 DIMM per
channel
Maximum capacity (RDIMM)
192 GB
6 x 32 GB RDIMM @ 2666 MT/s
NOTE: LRDIMM is not qualified by this server. This server does not support mixing LRDIMMs and RDIMMs. Attempting to
mix any combination of these DIMMs can cause the server to halt during BIOS installation. All memory installed in the server
must be of the same type.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
Memory Protection
For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature.
Page 6
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Expansion Slots
Slots #
Technology
5
PCIe 3.0
Bus
Width
X4
Connector Width
Slot Form Factor
Notes
X8
Full-height,
PCH
half-length slot
4
PCIe 3.0
X16
X16
Full-height,
Proc 1
full-length slot
3
PCIe 3.0
X8
X8
Full-height,
Proc 1
half-length slot
2
PCIe 3.0
X4
X8
Full-height,
Proc 1
half-length slot
1
PCIe 3.0
X16
X16
Full-height,
Proc 1
¾ length
(up to 9.5") Slot
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: Although the Speed of slot is designed for 32Gb/s, the actual running speed will be lower than it was designed.
Hence Slot 2 and Slot 5 will be least recommended for usage.
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
HPE Smart Array S100i SR Gen10 SW RAID
Software RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. For enabling please select HPE
FIO Enable Smart Array SW RAID (784308-B21).
NOTE: The S100i supports 10 ports as 2 additional ports are leveraged to support the M.2 option.
HPE Smart Array E208i-p SR Gen10 Controller
Essential RAID
Controller
HPE Smart Array E208e-p SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
Performance RAID
Controller
HPE Smart Array P408e-p SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (875242-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Optical Drive
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: Optical is optional in BTO models.
Hard Drives
None ship standard
Hard Drive Bays
Up to 8 Non-hot plug SATA 3.5-inch drives
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks
installed. The 4LFF configurations includes 3 blanks and 8SFF includes 7
blanks. Additional hard drive blanks can be ordered using either P/N
807878-B21 for the HPE LFF HDD Blank Kit or P/N 666987-B21 for
the HPE SFF HDD Blank Kit. These part numbers for single HDD blanks
below are also provided should you require replacement HDD blanks
for your server.
Page 7
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
NOTE: NHP SATA is limited to S100i controller.
4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8
8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16
Maximum Internal Storage
Hot Plug LFF SAS
Hot Plug LFF SATA
Hot Plug SFF SAS
Hot Plug SFF SATA
Non Hot Plug LFF SATA
Hot Plug LFF SATA SSD
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
CAPACITY
80 TB
80 TB
38.4 TB
32 TB
32 TB
30.72 TB
61.44 TB
61.44 TB
CONFIGURATION
8 x 10 TB
8 x 10 TB
16 x 2.4 TB
16 x 2 TB
8 x 4 TB
8 x 3.84 TB
16 x 3.84 TB
16 x 3.84 TB
Power Supply
HPE ML110 Gen10 350W ATX Power Supply Kit
HPE ML110 Gen10 550W ATX Power Supply Kit
NOTE: ATX power supply will not support redundant fan option.
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class
efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been
designed specifically for HPE ProLiant Gen10 Essential Series servers.
The HPE 550W ATX Power Supply is the standard, non-redundant AC power supply option for most HPE ProLiant Gen10
Essential servers. It features Silver-level (88%) certified power efficiency with a set of features optimized for the Gen10
Essential-series rack and tower servers.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet
connector.
NOTE: The 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit requires the RPS Enablement Kit.
NOTE: The RPS Enablement kit will support two power supplies.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation
and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This
flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please
check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Video
Network RJ-45
(Ethernet)
Serial
iLO Management Port
iLO Service Port
1 standard ( at system rear)
2 standard ( at system rear)
1 optional ( at system rear)
1 standard (at system rear)
1 standard (at system front)
Page 8
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
MicroSD Slot
1 standard (at system internal)
NOTE: The MicroSD slot is not hot-pluggable, please power down server before installation or removal.
USB 3.0
5 (2 front, 2 rear, 1 internal)
USB 2.0
3 (2 rear, 1 internal)
Operating Systems and Virtualization Software Support for ProLiant Servers
Microsoft Windows Serve
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
ClearOS
HPE and ClearCenter will help you lower the cost of building on-premise solutions without sacrificing security and ease of use.
HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive web-based
graphical user interface that provides a cloud-like experience on-premise, and an Application Marketplace with over 100 apps
and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow.
NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost.
For more information on ClearOS, please visit http://www.hpe.com/servers/clearos.
CentOS
NOTE: CentOS not directly supported / Community Supported (Based on RHEL so RHEL testing and enablement applicable
to CentOS) CentOS 6.9 / CentOS 7.3, 7.4.
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server.
http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/home?sp4ts.oid=1010026818.
Industry Standard Compliance
ACPI 6.1 Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
Novell Certified
PXE Support
VGA Port
USB 3.0 Compliant
USB 2.0 Compliant
Energy Star 2.1
SMBIOS 3.1
UEFI 2.6
ASHRAE A3
NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit:
http://www.hpe.com/servers/ashrae.
UEFI (Unified Extensible Firmware Interface Forum)
NOTE: UEFI is the default for the ML110 Gen10. Legacy mode can be selected in the field or as a CTO option
(758959-B22).
Page 9
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Graphics
Integrated Video Standard
• Video modes up to 1920 x 1200 @60Hz (32 bpp)
• 16MB Video Memory
HPE iLO 5 on system management memory
• 32 MB Flash
• 4 Gbit DDR 3 with ECC protection
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI
Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot and Secure Start enable for enhanced security
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• PXE boot support for IPv6 networks
• Workload Profiles for simple performance optimization
UEFI Boot Mode only:
• TPM 2.0 Support
• iSCSI Software Initiator Support.
• HTTP/HTTPs Boot support as a PXE alternative.
• Boot support for option cards that only support a UEFI option ROM
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE
ProLiant Gen10 Server.
Embedded Management
HPE Integrated Lights-Out
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote
management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware
Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi.
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API
iLO RESTful API is Redfish API conformance and offers simplified server management
automation such as configuration and maintenance tasks based on modern industry
standards. Learn more at http://www.hpe.com/info/restfulapi.
Page 10
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO management
portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at
http://www.hpe.com/servers/ahs.
Active Health System
Viewer
Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed
problem resolution with HPE self-repair recommendations, to learn more visit:
http://www.hpe.com/servers/ahsv.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update
Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant
(SPP). Learn more at http://www.hpe.com/info/smartupdate.
iLO Amplifier Pack
Designed for large enterprise and service provider environments with hundreds of HPE
servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that
delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at
unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities.
Learn more at http://www.hpe.com/servers/iLOamplifierpack.
HPE iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from anywhere from
select smartphones and mobile devices. For additional information please visit:
http://www.hpe.com/info/ilo/mobileapp.
RESTful Interface Tool
RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API
to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting
Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at
http://www.hpe.com/servers/stk or http://www.hpe.com/servers/powershell.
HPE OneView Standard
HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting
without additional fees. It can monitor multiple HPE server generations. The user interface is
similar to the HPE OneView Advanced version, but the software-defined functionality is not
available. Learn more at http://www.hpe.com/info/oneview.
HPE Systems Insight
Manager (HPE SIM)
Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE
ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE
servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless
firmware updates. Learn more at http://www.hpe.com/info/hpesim.
Security
UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-2 validation (iLO 5 certification in progress)
Common Criteria certification (iLO 5 certification in progress)
Configurable for PCI DSS compliance
Ability to rollback firmware
Secure erase of NAND/User data
Page 11
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Standard Features
TPM (Trusted Platform Module) 1.2 option
TPM (Trusted Platform Module) 2.0 option
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty
services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a
one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
Exceptions may apply to certain regions or countries. Warranty repairs may be accomplished through the use of Customer
Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A
travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also
designed for easy replacement but may involve added complexity; 3) Non CSR parts must be serviced by a trained
authorized service engineer. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no
charge. Additional information regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
Page 12
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Optional Features
Server Management
HPE iLO Advanced
HPE iLO Advanced
Premium Security Edition
HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE
ProLiant servers. The license includes the full integrated remote console, virtual keyboard,
video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based
and scripted virtual media and virtual folders. You can also activate the enhanced security and
power management functionality. Learn more about HPE iLO Advanced at
http://www.hpe.com/servers/iloadvanced.
HPE iLO Advanced Premium Security Edition for iLO 5 includes iLO Advanced License plus
high-end security modes, unique security capabilities, like Automatic FW recovery; Runtime
FW verification, and Secure erase. Learn more about HPE iLO Advanced Premium Security
Edition at: http://www.hpe.com/servers/ilopremium.
One Config Simple (SCE)
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5
minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you
require "custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard
Enterprise Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#
Page 13
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Service and Support
HPE Pointnext - Service and Support
Protect your business beyond warranty with HPE Support Services
HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational
Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and
Transformational Services focus on designing the transformation and creating a solution roadmap. Professional Services
specializes in creative configurations with flawless and on-time implementation, and on-budget execution. Finally, operational
services provides innovative new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak
performance. HPE is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the
complex simple.
Connect your devices:
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Reduce
down time and improve diagnostic accuracy with a single consolidated view of your environment. By connecting, you will receive
24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE
Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All
of these benefits are already available to you with your server storage and networking products, securely connected to HPE
support. Learn more about getting connected at http://www.hpe.com/services/getconnected
Parts and Materials
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in
operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth
in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired,
or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to
malfunction.
Other related Services
HPE Server Hardware Installation
Provides for the basic hardware installation of HPE branded servers, storage devices and networking options to assist you in
bringing your new hardware into operation in a timely and professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
HPE Education Services
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book on a class today
and learn how to get the most from your technology investment. http://www.hpe.com/ww/learn
HPE Support Center
The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE
business products. Submit support cases online, chat with HPE experts, access support resources or collaborate with peers.
Learn more http://www.hpe.com/support/hpesc
HPE's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for live support. Now,
you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Support
Service or HPE contractual support agreement.
*HPE Support Center Mobile App is subject to local availability.
For more information: http://www.hpe.com/services
Page 14
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Pre-configured Models
Entry Models
Performance Models
[SKU Number]
878450-xx1
878452-xx1
HPE ProLiant ML110 Gen10 3104 8GB-R S100i 4LFF
HPE ProLiant ML110 Gen10 4110 16GB-R S100i
Model Name
NHP SATA 350W PS Entry Server
4LFF SATA 550W PS Perf Server
Processor
3104 (6-Core, 1.7 GHz, 85W)
4110 (8-Core, 2.1 GHz, 85W)
Number of
One processor
Processors
8 GB RDIMM DDR4 2666 MT/s (1x 8 GB)
16 GB RDIMM DR 2666 MT/s (1x 16 GB)
Memory
NOTE: running at 2133 MT/s due to Processor
NOTE: running at 2400 MT/s due to Processor
limitation.
limitation.
Network
Embedded 2-Port 1GbE HPE Ethernet 1Gb 2-port 332i Adapter
Controller
Storage
Embedded SW RAID with 10 SATA ports
Controller
Hard Drive
None ship as standard
Internal
4 LFF HDD Bays (Non Hot Plug)
4 LFF HDD Bays (Hot Plug)
Storage
Optical Drive
1; (Optional: DVD-ROM, DVD-RW)
Bay
Optical Drive
None ship as standard
PCI-Express
5 PCIe 3.0 slots
Slots
Power Supply
(1) 350W ATX Power Supply
(1) 550W ATX Power Supply
Fans
2 non-hot plug, non-redundant
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE
Management
iLO Advanced(optional), HPE iLO Advanced Premium Security Edition (optional)
Energy Star
2.1 certified
Form Factor
Tower (4.5U)
Warranty
3-year parts, 3-year labor, 3-year onsite support with next business day response.
Country Code Key
xx1 = B21
Worldwide
xx1 = 001
US
xx1 = 031
UK
Japan
xx1 = 291
AP
xx1 = 371
EU
xx1 = 421
xx1 = AA1
PRC
NOTE: The -B21 WW SKU is to be ordered in all countries other than Japan.
Page 15
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Configuration Information - Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
SKU Number
Processor
DIMM Slots
Storage
Controller
PCIe
Drive Cage included
Network
Controller
Fans
Management
USB
HPE ProLiant ML110 Gen10
4LFF Non Hot Plug
Configure-to-order Server
872305-B21
HPE ProLiant ML110 Gen10 4LFF
Configure-to-order Server
HPE ProLiant ML110 Gen10 8SFF
Configure-to-order Server
872307-B21
Not included as standard
6 DIMM slots for RDIMM DDR4 Memory
872309-B21
Embedded SW RAID with 10 SATA ports, or choice of HPE PCIe Smart Array controller
5 PCIe 3.0 Slots
4 LFF Non Hot Plug
4 LFF Hot Plug
8 SFF Hot Plug
Embedded 2-Port 1GbE HPE Ethernet 1Gb 2-port 332i Adapter
2 non-hot plug, non-redundant
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE
iLO Advanced(optional), HPE iLO Advanced Premium Security Edition (optional)
2 front, 2 internal, 4 rear
Step 2a: Choose Required Options - Processors
(only one of the following from each list unless otherwise noted)
Processor Option Kits
HPE ML110 Gen10 Intel® Xeon-Gold 5122 (3.6GHz/4-core/105W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Gold 5120 (2.2GHz/14-core/105W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Silver 4112 (2.6GHz/4-core/85W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Silver 4110 (2.1GHz/8-core/85W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Silver 4108 (1.8GHz/8-core/85W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Bronze 3106 (1.7GHz/8-core/85W) FIO Processor Kit
HPE ML110 Gen10 Intel® Xeon-Bronze 3104 (1.7GHz/6-core/85W) FIO Processor Kit
Required Processor
872308-L21
872306-L21
872296-L21
876918-L21
876917-L21
876916-L21
876915-L21
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:
https://www.hpe.com/docs/memory-population-rules
For Gen10 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy
mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
Page 16
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Configuration Information - Factory Integrated Models
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815097-B21
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Standard Memory Kit
867853-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815098-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Standard Memory Kit
867855-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815100-B21
Step 2c: Choose Power Supplies
Select one or two power supplies from below.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the
HPE Power Advisor tool to determine the right size power supply for your server configuration. The HPE Power Advisor is
located at: http://www.hpe.com/info/hppoweradvisor.
NOTE: By RPS Enablement Kit power options, mixing of power supplies in the same RPS enablement kit is not supported. All
power supplies must be of the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your server.
HPE ML110 Gen10 350W ATX FIO PS Kit
867876-B21
HPE ML110 Gen10 550W ATX Power Supply Kit
874009-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865414-B21
HPE ML110 Gen10 Redundant Power Supply Enablement Kit
867875-B21
Step 3: Choose Additional Factory Integratable Options
One of the following from each list may be selected if desired at time of factory integration
HPE Legacy FIO Mode Setting
NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.
758959-B22
Page 17
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
information. Note the Cabling Matrix can help to explain the cable routing for each option:
HPE Unique Options
HPE ML110 Gen10 4LFF Drive Backplane Cage Kit
869491-B21
NOTE: The 4 LFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same
installation procedure.
HPE ML110 Gen10 4LFF Non Hot Plug Drive Cage Kit
874008-B21
NOTE: The 4 LFF Non hot-plug drive cage can be installed in both box 1 and box 2. Follow the same
installation procedure.
HPE ML110 Gen10 8SFF Drive Backplane Cage Kit
874007-B21
NOTE: The 8SFF hot-plug drive cage can be installed in both box 1 and box 2. Follow the same installation
procedure.
HPE ML110 Gen10 Redundant Power Supply Enablement Kit
867875-B21
NOTE: This kit is also required to support an optional redundant fan kit.
HPE ML110 Gen10 Redundant Fan with 4 Fans Kit
869489-B21
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W
Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is
indicated by a flashing amber Health LED.
4. When the system requirements are to meet the A3 extended operating environment.
HPE ML110 Gen10 Serial Port Kit
874010-B21
HPE ML110 Gen10 550W ATX Power Supply Kit
874009-B21
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor
Memory Selection
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability,
HPE recommends memory from the list located here: http://www.hpe.com/products/recommend.
Best product availability is limited to US, Canada, and Latin America at this time.
HPE DDR4 SmartMemory
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815097-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815098-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit
815100-B21
HPE DDR4 Standard Memory
HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Standard Memory Kit
867853-B21
HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Standard Memory Kit
867855-B21
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification
testing.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and
processor model.
HPE Optical Drives
HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
HPE 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
726536-B21
726537-B21
Page 18
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Core Options
HPE Drives
Enterprise - 12G SAS - SFF Drives
HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870753-B21
HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872475-B21
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870757-B21
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
870763-B21
HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872477-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870759-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
870765-B21
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872479-B21
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
872481-B21
HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
881457-B21
Enterprise - 12G SAS - LFF Drives
HPE 300GB SAS 12G Enterprise 15K LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware HDD
870755-B21
Midline - 12G SAS - SFF Drives
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD
832514-B21
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD
765464-B21
HPE 2TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e HDD
765466-B21
Midline - 12G SAS - LFF Drives
HPE 2TB SAS 12G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
833926-B21
HPE 4TB SAS 12G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
833928-B21
HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) LP 1yr Wty 512e Digitally Signed Firmware HDD
834031-B21
HPE 10TB SAS 12G Midline 7.2K LFF (3.5in) LP 1yr Wty Helium 512e Digitally Signed Firmware HDD
857646-B21
Midline - 6G SATA - SFF Drives
HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD
655710-B21
HPE 2TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD
765455-B21
Midline - 6G SATA - LFF Drives
HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
861686-B21
HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD
801882-B21
HPE 2TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
861681-B21
HPE 3TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
861688-B21
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Digitally Signed Firmware HDD
861683-B21
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD
801888-B21
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty 512e HDD
861744-B21
HPE 6TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty 512e HDD
861742-B21
HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Helium 512e Digitally Signed Firmware HDD
861596-B21
HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty 512e Digitally Signed Firmware HDD
834028-B21
HPE 10TB SATA 6G Midline 7.2K LFF (3.5in) LP 1yr Wty Helium 512e Digitally Signed Firmware HDD
857650-B21
SSD Selection
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability,
HPE recommends SSDs from the list located here: http://www.hpe.com/products/recommend.
Write Intensive – 12G SAS - SFF - Solid State Drives
HPE 400GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873351-B21
HPE 800GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873355-B21
HPE 1.6TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873357-B21
Read Intensive - 6G SATA - SFF - Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875503-B21
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868814-B21
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877746-B21
Page 19
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Core Options
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
Read Intensive - 6G SATA - LFF - Solid State Drives
HPE 960GB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
Read Intensive - 6G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 7.68TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
Mixed Use - 12G SAS - SFF - Solid State Drives
HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
Mixed Use - 6G SATA - SFF - Solid State Drives
HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
M.2 Selection
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: Installation of the M.2 universal enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350
Gen10 is one M.2 enablment card kit.
NOTE: M.2 supports Software RAID only.
Mixed Use - SATA – M.2 - Solid State Drives
HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
Read Intensive - 6G SATA - M.2 - Solid State Drives
HPE 150GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
Hard Drive Blank Kits
HPE Gen9 LFF HDD Spade Blank Kit
HPE Small Form Factor Hard Drive Blank Kit
875509-B21
877752-B21
875511-B21
877758-B21
875513-B21
877764-B21
877756-B21
877762-B21
872390-B21
872392-B21
872394-B21
870144-B21
872374-B21
873359-B21
872376-B21
873363-B21
872382-B21
873365-B21
872386-B21
873367-B21
880295-B21
875483-B21
877776-B21
875470-B21
877782-B21
875474-B21
877788-B21
875478-B21
875488-B21
875490-B21
875317-B21
807878-B21
666987-B21
Page 20
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Core Options
Hard Drive Kits
HPE Universal SATA HHHL 3yr Wty M.2 Kit
HPE Networking
1 Gigabit Ethernet adapters
HPE Ethernet 1Gb 4-port 331T Adapter
HPE Ethernet 1Gb 2-port 332T Adapter
HPE Ethernet 1Gb 2-port 361T Adapter
HPE Ethernet 1Gb 4-port 366T Adapter
10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 530SFP Adapter
HPE Ethernet 10Gb 2-port 530T Adapter
HPE Ethernet 10Gb 2-port 535T Adapter
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
HPE Ethernet 10Gb 2-port 562T Adapter
NOTE: The ML110 Gen10 ships with 2x 1 Gb Embedded.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic
environments must be purchased separately. Please see the related NIC QuickSpecs for Technical
Specifications and additional information:
http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html.
HPE Power Supplies
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard
C-14 power inlet connector.
HPE ML110 Gen10 550W ATX Power Supply Kit
HPE ML110 Gen10 Redundant Power Supply Enablement Kit
HPE Cooling Options
HPE ML110 Gen10 Redundant Fan with 4 Fans Kit
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W
Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This condition is
indicated by a flashing amber Health LED.
4. When the system requirements are to meet the A3 extended operating environment.
878783-B21
647594-B21
615732-B21
652497-B21
811546-B21
652503-B21
656596-B21
813661-B21
727055-B21
817738-B21
865414-B21
874009-B21
867875-B21
869489-B21
Page 21
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Additional Options
Embedded Management
HPE iLO Advanced
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Flexible Quantity LTU
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Tracking LTU
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Flexible Quantity LTU
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Tracking LTU
HPE iLO Essentials
HPE iLO Essentials including 1yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 1yr 24x7 Technical Support and Updates E-LTU
HPE iLO Essentials including 3yr 24x7 Tech Support and Updates 1-server LTU
HPE iLO Essentials including 3yr 24x7 Technical Support and Updates E-LTU
HPE Security
HPE Trusted Platform Module 2.0 Gen10 Option
NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy
Mode. It is
not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced
with
any other TPM module.
NOTE: There is a FIO setting to allow this TPM module to operate in a TPM 1.2 mode (872108-B21).
HPE Smart Array Controllers
E6U59ABE
512485-B21
512486-B21
512487-B21
E6U64ABE
BD505A
BD506A
BD507A
BD775A
E6U62ABE
BD774A
E6U61ABE
864279-B21
The Gen10 controller naming framework has been updated to simplify identification as depicted below.
For a more detailed breakout of the available Gen10 Smart Array controllers visit
the HPE Smart Array Gen10 Controllers Data Sheet.
Performance RAID Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21),
which supports multiple devices and is sold separately.
HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller
HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller
Essential RAID Controllers
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller
830824-B21
804405-B21
804394-B21
804398-B21
Page 22
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Additional Options
Optional Software
HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement) E-LTU
HPE Smart Array SR SmartCache (Single Key/Single Server) LTU
HPE Smart Array SR SmartCache (Single Key/Multiple Servers) LTU
HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU
NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers.
Optional Upgrades
HPE 96W Smart Storage Battery (up to 20 Devices/260mm Cable) Kit
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with
performance RAID controllers.
Q2F26AAE
D7S26A
D7S27A
D7S27AAE
875242-B21
HPE Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html. For hardware and software
compatibility of Hewlett Packard Enterprise tape backup products
http://www.hpe.com/storage/BURAcompatibility.
HPE USB and SD Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HPE 32GB microSD Mainstream Flash Media Kit
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
HPE 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HPE Dual 8GB microSD Enterprise Midline USB Kit
Rail Kits
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm
NOTE: Easy install rack rail tray which takes up 1U height in a standard rack facility. This kit is supported in
both ML350 and ML110 Gen10 for tower to rack conversion.
HPE Support Services
HPE 3Y FC 24x7 ML110 Gen10 SVC
HPE 3Y FC 24x7 wDMR ML110 Gen10 SVC
HPE 3Y FC 24x7 wCDMR ML110 Gen10 SVC
HPE 3Y PC 24x7 ML110 Gen10 SVC
HPE 3Y PC 24x7 wDMR ML110 Gen10 SVC
HPE 3Y PC 24x7 wCDMR ML110 Gen10 SVC
HPE Installation ML310e/ML110 Service
HPE Installation and Startup ML310e Service
700139-B21
726116-B21
737953-B21
741279-B21
874578-B21
H9CH9E
H9CJ0E
H9CJ1E
H9CJ2E
H9CJ3E
H9CJ4E
U6G21E
U6G23E
Page 23
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Memory
Memory Population guidelines
General Memory Population Rules and Guidelines:
. Install DIMMs only if the corresponding processor is installed.
. White DIMM slots denote the first slot to be populated in a channel.
. Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
. The maximum memory speed is a function of the memory type, memory configuration, and processor model.
. The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest DIMM capacity qualified
on the platform, the number and model of installed processors qualified on the platform.
. For details on the HPE Server Memory Options Population Rules, visit:
http://www.hpe.com/docs/memory-population-rules.
. To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required. For additional
information, please see the HPE DDR4 SmartMemory QuickSpecs.
Page 24
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Memory
DIMM Type
HPE SKU P/N
Register DIMM (RDIMM)
867855-B21
815097-B21
867853-B21
815098-B21
815100-B21
HPE 8GB 1Rx8
HPE 16GB 1Rx4
HPE 32GB
HPE 8GB 1Rx8
HPE 16GB 1Rx4
SKU Description
PC4-2666V-R
PC4-2666V-R
2Rx4 PC4PC4-2666V-R Kit
PC4-2666V-R Kit
STND Kit
STND Kit
2666V-R Kit
Single Rank
Single Rank
Single Rank
Single Rank
Dual Rank
DIMM Rank ->
(1R)
(1R)
(1R)
(1R)
(2R)
16GB
DIMM Capacity ->
8GB
8GB
16GB
32GB
1.2V
Voltage
1.2V
1.2V
1.2V
1.2V
2Gb
DRAM depth [bit]
1Gb
1Gb
2Gb
2Gb
x4
DRAM Width [bit]
x8
x8
x4
x4
8Gb
DRAM Density
8Gb
8Gb
8Gb
8Gb
19-19-19
CAS Latency
19-19-19
19-19-19
19-19-19
19-19-19
2666 MT/s
2666 MT/s
2666 MT/s
2666 MT/s
DIMM Native Speed (MT/s)
2666 MT/s
Intel Xeon®Silver 41xx/ Gold 51xx Processors Officially Supported Memory Speed (MT/s)
2400 MT/s
2400 MT/s
2400 MT/s
2400 MT/s
2400 MT/s
1 DIMM Per Channel
Intel Xeon®Bronze 31xx Processors Officially Supported Memory Speed (MT/s)
2133 MT/s
2133 MT/s
2133 MT/s
2133 MT/s
1 DIMM Per Channel
2133 MT/s
HPE Server Memory Speed (MT/s): Intel Xeon®Silver 41xx/ Gold 51xx Processors *
2400 MT/s
2400 MT/s
2400 MT/s
2400 MT/s
2400 MT/s
1 DIMM Per Channel
HPE Server Memory Speed (MT/s): Intel Xeon®Bronze 31xx Processors *
2133 MT/s
2133 MT/s
2133 MT/s
2133 MT/s
2133 MT/s
1 DIMM Per Channel
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre Configured
Models
3104
4110
Standard Memory
8 GB (1x8 GB RDIMM )
16 GB (1x16 GB RDIMM)
Maximum Memory Plus Standard Memory Replaced with
Optional Memory
Optional Memory
168 GB (8GB + 5x32GB)
192 GB (6x32 GB)
176 GB (16GB + 5x32 GB)
192 GB (6x32 GB)
DDR4 memory options part number decoder
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
•
•
•
8GB = 8,192 MB
16GB = 16,384 MB
32GB = 32,768 MB
For more information on memory, please see the Memory Quickspecs: HPE DDR4 SmartMemory
Page 25
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Storage
4-bay LFF non-hot-plug / hot-plug drive model
1 x 1-4
2 x 1-4
4 x LFF SATA Non-hot-plug / SAS,SATA Hot
Pluggable Hard Drive Bays
4 x LFF SATA Non-hot-plug / SAS,SATA Hot
Pluggable Hard Drive Bays (optional)
8-bay SFF hot-plug drive model
1 x 1-8
8 x SFF SATA/SSD Hot Pluggable Hard Drive Bays
2 x 1-8
8 x SFF SATA/SSD Hot Pluggable Hard Drive Bays
(optional)
Page 26
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Technical Specifications
System Unit
Tower Dimensions
Tower Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Supply Output
(per power supply)
System Inlet Temperature
17.32 (H)x 7.68.(W) x 18.92. (D) in (44 x 19.5 x 48.05 cm)
Minimum:
29.82 lbs (13.5 kg)
Maximum:
55.0 lbs (25.0 kg)
Rated Line Voltage
100 to 120 VAC
Rated Input
For 350W & 550W Power Supply:8A (at 100~240 VAC)
Frequency
50 to 60 Hz
Rated Input
For 550 W Power Supply:< 639 W (at 100 VAC),< 605 W (at 200 VAC)
Power
For 350 W Power Supply:< 427 W (at 100 VAC),< 427 W (at 200 VAC)
Maximum
For 550 W Power Supply:2204 BTU/hr (at 100 VAC),2113 BTU/hr (at
200 VAC)
For 350 W Power Supply:1452 BTU/hr (at 100 VAC),1544 BTU/hr (at
200 VAC)
Rated Steady-State Power For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200 VAC),
Maximum Peak Power
For 350 W Power Supply:350 W (at 100 VAC),350 W (at 200VAC),
Standard Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
Temperature
per every 305 m (1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate
of change may be limited by the type and number of options installed.
Extended Ambient
Operating Support
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
System performance during standard operating support may be
reduced if operating with a fan fault or above 30°C (86°F).
For approved hardware configurations, the supported system
inlet range is extended to be: 5° to 10°C (41° to 50°F) and
35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175 m (1.8°F per every 574 ft)
above 900 m (2953 ft) to a maximum of 3048m (10,000 ft).
The approved hardware configurations for this system are
listed at the URL: http://www.hpe.com/servers/ashrae.
System performance may be reduced if operating in the extended
ambient operating range or with a fan fault.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr
(36°F/hr).
Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb
temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing..
Operating
3050 m (10,000 ft). This value may be limited by the type and number
of options installed. Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (L WAd ) and declared average bystander
position A-Weighted sound pressure levels (L pAm ) when the product is operating in a 23°C ambient
environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and
declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard
shipping configurations. Additional options may result in increased sound levels. Please have your
HPE representative provide information from the HPE EMESC website for further technical details
regarding the configurations listed below.
Page 27
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Technical Specifications
Idle
LWAd
LpAm
4.0 Bels Entry
4.0 Bels Perf
24.8 dBA Entry
24.1 dBA Perf
Operating
LWAd
Emissions Classification
(EMC) – Regulatory
Information
4.0 Bels Entry
4.0 Bels Perf
LpAm
25.1 dBA Entry
24.1 dBA Perf
NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics
levels will vary depending on system configuration. Values are subject to change without
notification and are for reference only.
To view the regulatory information for your product, view the Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard
Enterprise Support Center:
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts
For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their QuickSpecs.
For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their QuickSpecs.
For information on the HPE Smart Array P408i-p SR Gen10 Controller please refer to their QuickSpecs.
For information on the HPE Smart Array P408e-p SR Gen10 Controller please refer to their QuickSpecs.
Environmentfriendly Products
and Approach
End-of-life Management and Hewlett Packard Enterprise offers end-of-life product return, trade-in,
Recycling
and recycling programs, in many geographic areas, for our products.
Products returned to Hewlett Packard Enterprise will be recycled, recovered
or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise web site. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard
Enterprise OEM customers who integrate and re-sell Hewlett Packard
Enterprise equipment.
Page 28
QuickSpecs
HPE ProLiant ML110 Gen10 Server
Summary of Changes
Date
16-Oct-2017
Version History
From Version 1 to 2
Action
Added
Changed
25-Sep-2017
Version 1
New
Description of Change
Added HPE Support Services.
Standard Features, Configuration Information –
Factory Integrated Models, Core Options, Additional
Options, and Memory section were revised.
New QuickSpecs.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is subject
to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set
forth in the express warranty statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
a00021851ENW - 16054 - Worldwide - V2 - 16-October-2017
Page 29