DVD PLAYER
OWNER’S MANUAL
MODEL : SD-2705
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2001 Toshiba Corporation
PAGE 2
INTRODUCTION
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
WARNING : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated ‘dangerous voltage’ within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION:
POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOUD.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for
future reference. Should the unit require maintenance, contact an authorized service location-see
service procedure.
Use of controls, adjustments or the performance of procedures other than those specified may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation
is present when the enclosure is opened. DO NOT STARE INTO BEAM.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
INDUSTRY CANADA REQUIREMENT :
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numéruque de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
RECORD YOUR MODEL NUMBER (Now, while you can see it)
The model and serial number of your new DVD
player are located on the back of the DVD player cabinet. For your future convenience, we suggest that you record these numbers here:
MODEL NO.____________________________________
SERIAL NO.____________________________________
INTRODUCTION
PAGE 3
Table of Contents
Introduction
Operation Using GUI Menu
❏
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . 2
❏
General Information about GUI Menu . . . . . . . . . 23
❏
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . 3
❏
Detailed Description of each GUI Menu Icon . . . 24
❏
IMPORTANT SAFETY INSTRUCTIONS . . . . . . 4-5
❏
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Advanced Operation
❏
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 7
❏
Using a Title Menu . . . . . . . . . . . . . . . . . . . . . . . 25
❏
Identification of Controls . . . . . . . . . . . . . . . . . 8-11
❏
Using a DVD Menu . . . . . . . . . . . . . . . . . . . . . . 25
Front Panel/Display Window . . . . . . . . . . . . . . . . . . . . 8
❏
Changing Subtitle Language . . . . . . . . . . . . . . . 26
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
❏
Changing Audio Soundtrack Language. . . . . . . . 26
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
❏
Viewing Multi Angle Discs . . . . . . . . . . . . . . . . . 27
Preparing the Remote Control . . . . . . . . . . . . . . . . . . 11
❏
Producing a 3D Surround Effect . . . . . . . . . . . . . 27
Operating with the Remote Control . . . . . . . . . . . . . . 11
❏
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
❏
Storing Markers in Memory to be Viewed or
Connections
Listened to again . . . . . . . . . . . . . . . . . . . . . . . . 29
❏
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 12
❏
Zoom Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❏
Connecting to an Audio System . . . . . . . . . . . . . 13
❏
Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❏
Connecting to Optional Audio System . . . . . . 14-16
❏
Program Play . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Enjoying Dolby Digital Sound. . . . . . . . . . . . . . . . . . . 14
Enjoying Dolby Pro Logic Surround Sound . . . . . . . . 15
Initial Settings
Enjoying 2 Channel Digital Stereo Sound. . . . . . . . . . 16
❏
Selection of Initial Settings . . . . . . . . . . . . . . . . . 32
Enjoying DTS Sound . . . . . . . . . . . . . . . . . . . . . . . . . 16
❏
Selecting Disc Languages . . . . . . . . . . . . . . . . . 33
❏
Selecting Rating Level and Password . . . . . . 34-35
Basic Operations
❏
Selecting TV Aspect . . . . . . . . . . . . . . . . . . . . . . 36
❏
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . 17-20
❏
Selecting Menu Language . . . . . . . . . . . . . . . . . 37
Stopping Play. . . . . . . . . . . . . . . . . . . . . . . . . . 19
❏
Selecting Digital Audio Output . . . . . . . . . . . . . . 38
Resume Play . . . . . . . . . . . . . . . . . . . . . . . . . . 19
❏
Others (DRC/Vocal/PBC) . . . . . . . . . . . . . . . . . . 39
Last Scene Memory . . . . . . . . . . . . . . . . . . . . . 19
❏
Table of Languages and Their Abbreviations . . . 40
Exchanging Discs during Playback . . . . . . . . . . 20
❏
Skipping Discs . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reference
Exchanging the Disc and Starting Playback . . . . 20
❏
Disc Requirements/Copyright Information . . . . . . 41
Special Playback. . . . . . . . . . . . . . . . . . . . . . 21-22
❏
Before Calling Service Personnel . . . . . . . . . . . . 42
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
❏
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Frame Advance . . . . . . . . . . . . . . . . . . . . . . . . 21
Skipping Chapters and Tracks Forward or Back. . 21
Others
To Scan at Fast Forward or Fast Reverse Playback . 22
❏
Playing in Slow-Motion . . . . . . . . . . . . . . . . . . . 22
LIMITED WARRANTY DVD VIDEO PLAYER . . . . 44-45
PAGE 4
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL
AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read owner’s manual
After unpacking this product, read the owner’s
manual carefully, and follow all operating and related
instructions.
2. Power Sources
This product should be operated only from the type
of power source indicated on the label. If you are
not sure of the type of power supply in your home,
consult your product dealer or local power company.
For products intended to operate from battery
power, or other sources, refer to the operating
instructions.
3. Grounding or Polarization
This product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
4. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating. These
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
5. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
6. Water and Moisture
Do not use this product near water-for example,
near a bath tub, wash bowl, kitchen sink. or laundry
tub; in a wet basement; or near a swimming pool
and the like.
7. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
8. Power-Cord Protection
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, playing particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
9. Overloading
Do not overload wall outlets, extension cords, or
integrated convenience receptacles as this can
result in a risk of fire or electric shock.
10. Lightning
For added protection of this product during storms, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet.
This will prevent damage to the product due to
lightning and power-line surges.
11. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the product.
12. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
INTRODUCTION
PAGE 5
IMPORTANT SAFETY INSTRUCTIONS (Cont’d)
13. Accessories
Do not place this product on
an unstable cart, stand, tripod,
bracket, or table. The product
may fall, causing serious
injury to a child or adult, and
serious damage to the
product. Use only with a cart,
stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer. A product and cart combination should
be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and
cart combination to overturn.
14. Disc Tray
Keep your fingers well clear of the disc tray as it is
closing. It may cause serious personal injury.
15. Burden
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.
16. Connecting
When you connect the product to other equipment,
turn off the power and unplug all of the equipment
from the wall outlet. Failure to do so may cause an
electric shock and serious personal injury. Read the
owner’s manual of the other equipment carefully and
follow the instructions when making any
connections.
17. Sound Volume
Reduce the volume to the minimum level before you
turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
20. Laser Beam
Do not look into the opening of the disc tray or
ventilation opening of the product to see the source
of the laser beam. It may cause damage to your
vision.
21. Disc
Do not use a cracked, deformed, or repaired disc.
These discs are easily broken and may cause
serious personal injury and product malfunction.
22. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is
damaged.
b) If liquid has been spilled, or objects have fallen
into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in
performance-this indicates a need for service.
23. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18. Sound Distortion
Do not allow the product to output distorted sound
for a prolonged time. It may cause speaker overheating and fire.
24. Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
19. Headphones
When you use the headphones, keep the volume at
a moderate level. If you use the headphones
continuously with high volume sound, it may cause
hearing damage.
25. Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
PAGE 6
INTRODUCTION
Precautions
Notes on handling
❏
❏
❏
❏
❏
When shipping the DVD player, always use the
original shipping carton and packing materials.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.
When the DVD player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Notes on Locating
❏
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.
Notes on Cleaning
Use a soft, dry cloth for cleaning.
❏ For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.
❏ If you use a chemical saturated cloth to clean the
unit, follow that product’s instructions.
Warning: Cleaning and adjustment of lenses
and/or other components of playback mechanism
should be performed by a qualified service
technician.
To Obtain a Clear Picture
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain
a clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.
Notes on Moisture Condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Moisture condensation occurs, for example, when
you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass. In
the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.
Exa
mples of moistur
e
ensation
cond
Optical
p lens
pick-u
Moisture condensation occurs during the following
cases.
❏
❏
❏
❏
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
air from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot
and humid place just after you move the unit from
an air conditioned room.
When you use the DVD player in a humid place.
It’ s to o
wa rm !
❏
Do not use the DVD player when moisture condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for
two or three hours. After two or three hours, the
DVD player will have warmed up and evaporated
any moisture. Keep the DVD player connected to
the wall outlet and moisture condensation will seldom occur.
Wa
it!
INTRODUCTION
PAGE 7
Notes on Discs
This section shows you how to handle, clean, and store discs.
On Handling Discs
On Storing Discs
❍
❍
Do not touch the playback side of the disc.
❍
❍
❍
Do not store discs in a place subject to
direct sunlight or near heat sources.
Do not store discs in places subject to
moisture and dust such as a bathroom or
near a humidifier.
Store discs vertically in a case. Stacking or
placing objects on discs outside of their
case may cause warping.
Do not attach paper or tape to discs.
On Cleaning Discs
About This Owner’s Manual
❍
❍
❍
❍
Fingerprints and dust on the disc cause
picture and sound deterioration. Wipe the
disc from the center outward with a soft
cloth. Always keep the disc clean.
If you cannot wipe off the dust with a soft
cloth, wipe the disc lightly with a slightly
moistened soft cloth and finish with a dry
cloth.
Do not use any type of solvents such as
thinner, benzine, commercially available
cleaners or anti-static spray for vinyl LPs.
They may damage the disc.
❍
❍
This owner’s manual explains the basic
instructions of this DVD player.
Some DVD video discs have functions that
may not be explained in this owner’s manual.
Therefore, some instructions may differ from
this owner’s manual, and there may be extra
instructions. In this case, follow the instructions
displayed on the TV screen or package.
“
” may appear on the TV screen
during operation. This icon means the
function explained in this owner’s manual is
not available on that specific DVD video
disc.
PAGE 8
INTRODUCTION
Identification of Controls
Front Panel
POWER indicator
PLAY button
STOP button
RANDOM button
PAUSE button
REPEAT button
MENU button
DISC SKIP button
CLEAR button
EX-CHANGE button
POWER button
ENTER button
DISC SELECT (1 – 5)
buttons
Remote sensor
Display window
ARROW buttons
SKIP buttons
Disc tray
OPEN/CLOSE button
Display Window
TITLE
CHP/TRK
PROG.
RANDOM ALL A
B
INTRODUCTION
Identification of Controls (Cont’d)
Rear Panel
PAGE 9
PAGE 10
INTRODUCTION
Identification of Controls (Cont’d)
Remote Control
You will find instructions for each of the remote control functions in the appropriate sections of this
instruction manual.
MARKER button
SEARCH button
POWER button
OPEN/CLOSE button
ANGLE button
AUDIO button
RANDOM button
PROGRAM button
SUBTITLE button
CLEAR button
NUMBER buttons
PLAY button
SKIP (❈SEARCH)
button
SKIP (❈SEARCH)
button
STOP button
ZOOM button
PAUSE/STEP button
GUI DISPLAY button
SELECT/ENTER button
***ARROW buttons
SLOW (F V / V G) buttons
SETUP button
*TOP MENU button
RETURN button
**MENU button
DISC SKIP button
REPEAT button
*TOP MENU button
Use the TOP MENU button to display
the title menu included on selected
DVD video discs. To operate a menu
screen, follow the instructions in
“Using a Title Menu” (page 25).
**MENU button
Use the MENU button to display the
menu screen included on selected
DVD video discs. To operate a menu
screen, follow the instructions in
“Using a DVD Menu” (page 25).
A-B REPEAT button
***Directional arrow buttons
(up, down, left, right) for use in
highlighting a selection on a GUI
menu screen, TITLE and MENU
screen.
❈
Press and hold button for about
two seconds to activate picture
search function.
INTRODUCTION
PAGE 11
Identification of Controls (Cont’d)
Preparing the Remote Control
Insert the batteries into the remote control so you can
use it to operate the DVD player.
1
Open the battery cover.
2
Insert batteries (AAA size).
Operating with the Remote Control
This section shows you how to use the remote control.
Point the remote control at the
remote sensor and press the
buttons.
● Make sure to match the + and - on the batteries to
the marks inside the battery compartment.
3
30° 30°
Within about 23 ft (about 7 m)
Close the cover.
AAA
Distance: About 23 ft (7 m) from the front of the remote
sensor
Angle:
About 30° in each direction of the front of the
remote sensor
* Do not expose the remote sensor of the DVD
player to a strong light source such as direct
sunlight or illumination. If you do so, you may not
be able to operate the DVD player with the remote
control.
Notes on batteries
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
Improper use of batteries may cause battery leakage and
corrosion.
To operate the remote control correctly, follow the
instructions.
Do not insert the batteries into the remote control in the
wrong direction.
Do not charge, heat, open, or short-circuit the batteries.
Do not throw the batteries into fire.
Do not leave dead or exhausted batteries in the remote
control.
Do not use different types of batteries together, or mix
old and new batteries.
If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage
from battery corrosion.
If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
The batteries should last about one year with normal
use.
Notes on the remote control
❍
❍
❍
❍
❍
Point the remote control at the remote sensor on the
DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control in an extremely hot or
humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
Connecting to a TV
Connect the DVD player to your TV.
VIDEO OUTPUT SELECT switch
To S-VIDEO OUT
To AUDIO OUT (L/R)/
VIDEO OUT
To COMPONENT
VIDEO OUT
Video cable (Y, Pb, Pr)
(not supplied)
S-video cable
(Not supplied)
Audio/Video cable
(supplied)
To S-video input
To audio inputs
To video input
TV or monitor with
audio/video inputs
CONNECTIONS
PAGE 13
Connecting to an Audio System
You can listen to the sound of audio CDs and DVD video discs in stereo.
To S-VIDEO OUT
S-video cable (Not supplied)
To VIDEO OUT
To AUDIO OUT (L/R)
Audio cable
(supplied)
If the TV has an S-video input, connect
the DVD player with the S-video cable.
To audio inputs
To S-video input
Audio system
Video cable
(supplied)
To video input
TV or monitor with
audio/video inputs
Notes
❍
❍
❍
❍
❍
Refer to the owner’s manual of your audio system as well.
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD
player away from the tuner and radio.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to “Selecting Digital Audio Output” on page 38).
PAGE 14
CONNECTIONS
Connecting to Optional Audio System
Enjoying Dolby Digital Sound
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Dolby Digital
Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the DVD player to a 6 channel receiver equipped with a Dolby Digital decoder
or Dolby Digital processor.
To DIGITAL OUT
(COAXIAL or OPTICAL)
To S-VIDEO OUT
or VIDEO OUT
75 ohm coaxial cable
or Optical cable
Receiver equipped
with a Dolby Digital
decoder
To enjoy Dolby Digital sound
from this DVD player you need
the following:
S-Video cable
or Video cable
Connection
example
To digital
audio input
To S-video Input
or Video Input
Front speaker
(left)
Front speaker
(right)
Center
speaker
● DVD recorded in Dolby Digital
Subwoofer
● 6 channel receiver equipped
with a Dolby Digital decoder,
or Dolby Digital processor and
power receiver
Rear speaker
(left surround)
Rear speaker
(right surround)
● 5 speakers and 1 sub woofer
To enjoy Dolby Digital sound
You need to select “Dolby Digital”
from the SETUP menu.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Notes
❍
❍
❍
❍
Refer to the owner’s manual of your audio equipment as well.
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
CONNECTIONS
PAGE 15
Connecting to Optional Audio System (Cont’d)
Enjoying Dolby Pro Logic Surround Sound
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding.
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
To VIDEO OUT
To AUDIO OUT
Audio cable
Video cable
To audio input
Connection example
Receiver equipped
with Dolby Pro
Logic Surround
Subwoofer
(Optional)
To video input
Center speaker
Front
speaker
(right)
Front
speaker
(left)
TV
Rear speaker
(left)
●
Rear speaker
(right)
With a receiver equipped with Dolby Digital
Connect the equipment the same way as described in “Enjoying Dolby Digital Sound” on the previous page. Refer to the
receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to “Selecting Digital Audio Output” on page 38).
PAGE 16
CONNECTIONS
Connecting to Optional Audio System (Cont’d)
Enjoying 2 Channel Digital Stereo Sound
Enjoying DTS Sound
BASIC OPERATION
PAGE 17
Basic Playback
This section explains the basics on how to play back a DVD video disc.
Preparations
● When you want to play back DVD video discs, turn on the TV and
select the video input source connected to the DVD player.
● When you want to enjoy the sound of DVD video discs or audio
CDs from the audio system, turn on the audio system and select
the input source connected to the DVD player.
● For connection details, see pages 12 through 16.
● Set the playback picture size according to the aspect ratio of the
connected TV via the SETUP menu (TV Aspect).
● If you do not have the necessary equipment to enjoy Dolby Digital
sound, set the Digital Audio Output (via the SETUP menu) to
“PCM”.
1
Press POWER.
2
Press OPEN/CLOSE.
●
The DVD player turns on and the power indicator
lights.
The disc tray opens.
You can open the disc tray by pressing this button even if the
DVD player is in standby mode.
3
●
●
●
4
Place a disc on the disc tray with the
playback side down.
There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide,
it may damage the disc and cause the DVD player to
malfunction.
Do not place anything except 3” discs or 5” discs on the disc
tray.
Discs can be loaded one at a time by pressing DISC SKIP or
DISC SELECT (1 - 5) to rotate the carousel.
Press OPEN/CLOSE or PLAY to close the
loading drawer.
The disc on the tray 1 is ready to be played back.
Playback may begin automatically depending on the
disc.
If no disc is loaded on the disc tray 1, select another
disc by following step 5.
●
●
Do not close the loading drawer by hand.
If the disc is placed in upside down (and it is a single sided
disc), “NO DISC” or “DISC ERROR” appears on the TV
screen.
VCD
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL A
B
1 2 3 4 5
Operating status indicator
●
●
If you insert an audio CD, the CD indicator lights up on the
display. The title number does not appear.
After playing back all of the chapters in the title, the DVD player
automatically stops and returns to the menu screen.
PAGE 18
BASIC OPERATION
Basic Playback (Cont’d)
5
If you want to select another disc, press DISC
SKIP on the remote control once or more, or
press DISC SELECT (1 - 5) on the front panel.
Also you can select a disc in the DVD player directly
by using the remote control, press DISC SKIP and
then press a number button (1-5) on the remote control
within one second.
6
Press PLAY to begin playback.
Playback begins.
You can skip this step if the disc is already playing
automatically.
The menu screen appears on the TV screen.
In the case of interactive DVDs with playback, a menu screen appears
on the TV screen. Perform the following steps:
7
Press D/E/F/G and press SELECT/ENTER, or
press the numeric button(s), to select the
desired item.
Playback of the selected item begins.
●
For further information, refer to the disc jacket of the disc
you are playing.
After operation
When the unit is not in use, remove the disc and press
POWER to turn off the power.
Notes
❍
❍
❍
❍
❍
❍
Do not move the DVD player during playback. Doing so may
damage the disc and the DVD player.
Use the OPEN/CLOSE button on the remote control or DVD
player to open and close the disc tray. Do not push the disc tray
while it is moving. Doing so may cause the DVD player to
malfunction.
Do not push up the disc tray or put any objects other than discs
on the disc tray. Doing so may cause the DVD video
player to malfunction.
Keep your fingers well clear of the disc tray as it is closing. Be
especially careful with children’s fingers around the
closing disc tray as there is a risk of personal injury.
When “
” appears on the TV screen while a button is
pressed, it means that this function is not available on the disc
you are playing.
Depending on the DVD disc, some operations may be different
or restricted. Refer to the jacket or case of the disc you are
playing.
BASIC OPERATION
PAGE 19
Basic Playback (Cont’d)
Stopping Play
Press STOP during playback.
Resume Play
● When play is stopped, the unit memorizes the point
where STOP was pressed (RESUME function).
Press PLAY and playback will resume from this point.
Notes
❍
❍
❍
❍
❍
This operation works only with discs for which the elapsed playing time appears in the DVD display window during stop.
Resume function will be cleared when the STOP is pressed on
the STOP mode.
Resume function will be cleared when the power is turned off
and then on.
Opening the disc tray cancels Resume function.
The Resume function may not be available on some DVD discs
or Video CDs (version 2.0).
Last Scene Memory
This player memorizes last scene for the last disc you have
watched. Settings remain in memory even if you remove the
disc from the player or switch off the player. If you load a disc
that has its settings memorized, Latest Stop Position is
automatically recalled.
Notes
❍
❍
❍
Settings are stored in memory for use any time.
Switching of the audio mode, etc., is automatic on some discs.
This player does not memorize if you switch off the player when
a DVD or title menu appears on the TV screen.
Screen Saver
The screen saver is useful to prevent your display from becoming damaged.
The screen saver picture appears when you leave the DVD
player in stop mode for about 5 minutes.
Automatic power off function
After the Screen Saver has been engaged for about 5 minutes,
the DVD player will automatically turn itself off.
Screen Saver
PAGE 20
BASIC OPERATION
Basic Playback (Cont’d)
Exchanging Discs during Playback
1
Press EX-CHANGE during playback to open
the loading drawer.
2
Press DISC SKIP to rotate the disc tray to the
desired position.
The carousel will advance clockwise by one disc tray.
Note: The disc tray which was in the play position can
not be exchanged.
3
Exchange the discs and press EX-CHANGE or
OPEN/CLOSE to close the loading drawer.
Skipping Discs
Press DISC SKIP during playback or in the stop mode.
● Each time the button is pressed, the next disc tray is
selected.
TITLE
CHP/TRK
DVD
1 2 3 4 5
1 2 3 4 5
Notes
❍
When the DISC SKIP is pressed during playback or in the stop
mode, the disc tray advances and playback begins from the
beginning of the next disc.
❍
If there is no disc on the selected disc tray, the disc tray of the
next number will be selected.
❍
When DISC SKIP is pressed during playback of disc 5, playback
of disc 1 will start.
Exchanging the Disc and Starting Playback
1
Press OPEN/CLOSE during playback or in the
stop mode.
Play is stopped (if pressed during playback), the
loading drawer opens and the disc tray which was in
the play position comes to the center position.
2
Exchange the disc in the center position.
Center position
3
Press OPEN/CLOSE or PLAY again.
The loading drawer closes, the disc tray returns to the
play position and playback begins from the new disc.
BASIC OPERATION
PAGE 21
Still Picture (Pause)
Press PAUSE/STEP during playback.
●
DVD/Video CD
The player will be placed in the still picture mode.
● CD
Playback will be paused.
Frame Advance (DVD and Video CD only)
Press PAUSE/STEP during still playback.
(Each time you press PAUSE/STEP, the picture advances
one frame)
To resume normal playback, press PLAY.
Skipping Chapters and Tracks
Forward or Back
Skipping forward
Press SKIP
during playback.
A chapter (DVD) or a track (CD/Video CD) is skipped each
time this button is pressed.
Skipping back
Press SKIP
during playback.
● When this button is pressed once midway through a
chapter/track, the player returns to the start of that
chapter/track. When it is pressed repeatedly, a
chapter/track is skipped each time the button is pressed.
For your reference:
● When
SKIP
is pressed during menu play of
video CDs equipped with PBC (Version 2.0), a menu
screen may appear.
PAGE 22
BASIC OPERATION
Special Playback (Cont’d)
You can play back discs at various speeds.
To Scan at Fast Forward or Fast
Reverse Playback.
Press and hold SKIP
or
button for about
two seconds during playback.
[TV screen]
FF X2
GG X2
● The image advances (or reverses) is relatively slow at
first. When the button is pressed again, the speed
increases. (Each time the button is pressed, the speed
increases up to 4 steps (DVD) or 3 steps (CD/Video CD).)
● The speed will be maintained even after the button is
released.
To return to normal playback, press PLAY.
Note
❍
❍
The DVD player does not play back sound during high speed
reverse and forward playback of DVD video discs.
However, the DVD player plays back sound during fast forward
or fast reverse playback of audio CDs.
Subtitles do not appear on the screen during scan playback.
Playing in Slow-Motion (DVD and Video CD only)
Press SLOW
F V or V G during playback.
The playback speed is reduced to 1/16 of the normal speed.
[TV screen]
FV
1/16
V G 1/16
● The speed that the image advances (or reverses) is slow
at first. When the button is pressed again, the speed
increases. (Each time the button is pressed, the speed
increase up to 4 steps.)
● The speed will be maintained even after the button is
released.
To return to normal playback, press PLAY.
Notes
❍
❍
❍
The sound is muted during slow-motion playback.
The Slow-Motion playback in reverse is not applicable for
Video CDs.
The SLOW buttons do not function with Audio CDs.
OPERATION USING GUI MENU
PAGE 23
General Information about GUI Menu
This unit features an icon based GUI menu showing
disc information (title/chapter/track number, elapsed
playing time, audio/subtitle language, angle, and
sound) and player information (repeat play, play mode,
marker, etc.). Some icons only show the indicated
information. Other icons allow settings to be changed.
Common procedures
Press GUI DISPLAY during playback.
● Title function can be accessed from the stop mode.
2
Press D/E to select the desired item.
● The current selected item is highlighted by a yellow
frame around its menu icon.
3
Press F/G to select the desired setting.
● When numbers are displayed (e.g. title number),
the numeric buttons can also be used for setting
instead of F/G.
● For some functions, the setting will be registered
immediately; for others, SELECT/ENTER must be
pressed.
To clear the GUI Menu display, press GUI
DISPLAY again.
PAGE 24
OPERATION USING GUI MENU
Detailed Description of each GUI Menu Icon
You can view information about a disc and its operational status on the TV screen.
1
1
0:16:57
1 ENG
D
6 CH
OFF
1
NORM.
Indicates the current title number;
and to jump to a desired title number
Indicates the current chapter number;
and to jump to a desired chapter number
Indicates the elapsed time;
and directly select scenes by the desired time.
Indicates the current audio soundtrack language,
encoding method, channel number;
and to change the settings.
Indicates the current subtitles language;
and to change the setting.
Indicates the current angle number;
and to change the angle.
Indicates the current sound enhancement (NORMAL or
3D SURROUND);
and to change the setting.
Indicates the current track number;
and to jump to the desired track number
Indicates the elapsed time;
(Display only)
Indicates the current audio (STEREO, LEFT, RIGHT);
and to select a desired audio channel.
Indicates the current sound enhancement (NORMAL or
3D SURROUND);
and to change the setting (Audio CD only).
ADVANCED OPERATION
PAGE 25
Using a Title Menu
Press TOP MENU.
A list of the titles on the disc is displayed.
Pressing TOP MENU again to resume play from the
location when TOP MENU was first pressed.
• Resume play may not be possible on certain discs.
Press D/E/F/G and press SELECT/ENTER or
PLAY, or press the numeric button(s), to
select a desired title.
The selected title now begins playback.
Press MENU during playback.
The DVD menu encoded on the disc is displayed.
Pressing MENU again resumes playback from the
scene when MENU was first pressed.
• Resume playback may not be possible on certain
discs.
Press D/E/F/G and press SELECT/ENTER, or
press the numeric button(s), to select a
desired item.
The selected item is now displayed.
PAGE 26
ADVANCED OPERATION
Changing Subtitle Language
It is possible to change the subtitle language to a
different language from the one selected at the initial
setup. (See page 33 for further info.)
This operation functions only on discs that include
multiple subtitle languages.
1
Press SUBTITLE during playback.
When no subtitles are available, “OFF” will be
displayed instead of the language number.
OFF
1, 2
2
The number corresponding to the subtitle
language being played back is displayed.
Notes
❍
❍
❍
❍
In some cases, the subtitle language is not changed to
the selected one immediately.
When a disc supporting closed captioned data is played,
the subtitle and the closed caption data may overlap
each other on the TV screen. In this case, turn the subtitle off.
When a desired language can not be selected even after
pressing the button several times, the language is not
available on the disc.
When the power is turned on or the disc is removed,
subtitles will appear in the language selected at the initial
setting. If this language is not recorded on the disc, the
disc’s priority language appears.
Press SUBTITLE repeatedly until the
desired language is selected.
1 ENG
To eliminate the On Screen Subtitles.
Press SUBTITLE repeatedly to select OFF at step 2.
Changing Audio Soundtrack Language
It is possible to change the audio soundtrack language
(or encoding method, channel number) to a different
language from the one selected at the initial setup.
(See page 33 for further info.) This operation works
only with discs on which multiple audio soundtrack
languages are included.
It may be possible to change the audio channel in
case of audio CD.
• DVD
Press AUDIO during play.
1
1 ENG
D
6 CH
2
1, 2
Notes
❍
❍
❍
When the desired language is not selected even after
pressing the AUDIO button several times, the language
is not available on the disc.
When the power is turned on or the disc is removed, the
language heard is the one selected at the initial setup.
If this language is not mastered on the disc, only the
language available on the disc will be heard.
Some discs may not respond to Audio feature.
Number of the audio soundtrack language being
played back.
Press AUDIO repeatedly until the
desired language (or encoding method,
channel number) is selected.
2 FRE
D
6 CH
• CD/Video CD
1 Press AUDIO during playback.
STER.
2
Press AUDIO repeatedly until the
desired sound is selected.
LEFT
ADVANCED OPERATION
PAGE 27
Viewing Multi Angle Discs
Some DVDs may contain scenes which have been
shot simultaneously from a variety of different angles.
You can view each of these different angles using the
ANGLE button. (The recorded angles differ depending
on the disc used.)
1
Press ANGLE during playback.
Number of angle
being played back
is displayed.
2
1
Press ANGLE repeatedly until the
desired angle is selected.
2
For your reference
• The ANGLE indicator will blink in the DVD display
window during scenes recorded at different angles as
an indication that angle switching is possible.
• The angle number can be programmed beforehand; the
angle will switch to the selected number when the
ANGLE indicator blinks.
Note
This unit can produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel audio playback from two conventional stereo speakers instead of the five or more speakers normally
required to listen to multi-channel audio from a home
theatre. This feature works with DVD discs encoded with
Dolby Pro Logic and Dolby Digital audio tracks.
1
Press GUI DISPLAY during playback.
2
Press D/E to select SOUND item.
NORM.
3
Press F/G repeatedly until the desired
sound is selected.
Each time this button is pressed, the icon
display changes.
3D SUR
Notes
❍
❍
❍
This 3D Surround effect may not be available on some
DVD discs, including those recorded with a mono audio
soundtrack.
Turn off the TV surround sound and other surround
effects when using this 3D surround effect.
For best 3D Surround effect using only two speakers it is
recommended that the two speakers be positioned
approximately 8’ to 10’ apart, and the listening
position should be 8’ to 10’ away from the speakers.
PAGE 28
ADVANCED OPERATION
Repeat Play
Repeating viewing (listening)
Repeating sections between two
specific points (A-B repeat)
Press REPEAT during playback.
Each time this button is pressed, the icon display
changes as shown below and the disc will repeat a
chapter or title (DVD) or a track (CD/Video CD).
1
While the disc is playing, press A-B RPT at
the point where repeat play is to start (A).
A
• DVD
Repeat of chapter
being played
Repeat of title
being played
• You can select “OFF” at this step by pressing
CLEAR.
CHAPT
TITLE
2
Cancels repeat mode
(normal play)
OFF
Press A-B RPT during playback at the
point where repeat play is to be
concluded (B).
• CD/Video CD
Repeat of track
being played
Repeat of entire
current disc contents
A
Repeat play of the selection between points A
and B starts.
DISC
ALL
OFF
Cancels repeat mode
(normal play)
To return to normal play
Press A-B RPT once “OFF” is displayed.
OFF
To enjoy program repeat play (CD/Video CD)
If REPEAT is pressed during program play, repeat play
is operated as below.
Repeat of all programs
Notes
❍
TRACK
❍
❍
ALL
❍
Cancel repeat mode
(Program play)
B
TRACK
Repeat of entire
all disc contents
Repeat of the
current programmed
track
*
OFF
To return to normal play
Press REPEAT several times until “OFF” is displayed.
Repeat play works only with discs for which the elapsed
playing time appears in the DVD display window during
playback.
Repeat play may not work correctly with some DVDs and
some Video CDs.
A-B repeat play works only within a DVD title or a
CD/Video CD track .
Some subtitles proceeding point A or B may not be
displayed.
ADVANCED OPERATION
PAGE 29
Storing Markers in Memory to be Viewed or Listened to again
Storing a MARKER in the DVD memory is similar
to marking your page in a book. It allows you to
quickly return to any point on the disc.
Storing a marker in the memory
1
Press MARKER during play at the starting
point to be viewed (listened to) again.
1/9
Indicates “1/9” is stored in the memory.
Up to 9 marks can be stored in the memory.
Recalling/Clearing a marker
2
Press SEARCH during playback.
The MARKER SEARCH menu will appear on the TV
screen.
MARKER SEARCH
1 2 3 4 5 6 7 8 9
3
Press F/G to select the marker to be
recalled/cleared.
Press SELECT/ENTER to recall a marker.
Or press CLEAR to clear a marker.
Playback resumes from the point corresponding to the
selected marker.
Notes
❍ These operations work only with discs for which the elapsed
playing time appears in the DVD display window during playback
or stop operation.
❍ Some subtitles recorded around the marker may not be
displayed (DVD).
❍ All the markers are cleared when the power is turned off or the
disc is removed.
❍ The marker cannot be memorized when the DVD or title menu is
displayed on the TV screen.
PAGE 30
ADVANCED OPERATION
Zoom Feature
Random Play
ADVANCED OPERATION
PAGE 31
Program Play
The player plays the tracks on the disc in the
order you specify.
1
Press PROGRAM on the stop mode.
The program menu screen appears on the TV.
Note: Program play function is possible only
with audio CDs. It does not work with DVD
movie discs and Video CDs (Version 2.0).
Program
Step
1
1
Clear All
• To exit the screen, press PROGRAM or RETURN.
2
Enter the disk number using the numerical
keys (1-5) and then press SELECT/ENTER.
3
Enter the track number using the numerical
keys (0-9) and then press SELECT/ENTER.
The next area is selected.
4
Repeat steps 2 to 3.
5
Press PLAY to exit the menu.
Up to 20 tracks can be programmed.
The selected tracks are stored in the player memory
and playback begins with the first programmed
sequence.
After playback of all programmed tracks is
completed, playback is stopped
Clearing the program
●
To clear the programmed tracks one by one
Press D/E/F/G to select the unwanted track and then press
CLEAR.
●
To clear all the programmed tracks
Press D/E/F/G to select “Clear All” and then press
SELECT/ENTER. Press PROGRAM or RETURN to exit the
screen. (The programs are also cleared when the power is
turned off or the disc is removed.)
PAGE 32
INITIAL SETTINGS
Selection of Initial Settings
Once the initial settings have been completed,
the player can always be operated under the
same conditions (especially with DVD discs).
The settings will be retained in the memory until
they are changed, even if the power is switched
off.
Selection of initial settings
1
Press SETUP in the stop or playback mode.
The SETUP menu is displayed.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Password
Spanish
TV Aspect
Italian
Menu Language
Chinese
Polish
Digital Audio Output
Hungarian
Russian
Others
2
Other — — — —
Press D/E to select the desired item.
The screen will show the current setting for the
selected item, and the alternate setting(s).
• Disc Audio (see page 33.)
• Disc Subtitle (see page 33.)
• Disc Menu (see page 33.)
• Rating (see page 34.)
• Password (see page 35.)
• TV Aspect (see page 36.)
• Menu Language (see page 37.)
• Digital Audio Output (see page 38.)
• Others (see page 39.)
3
2, 3
3
1
Press G and then D/E to select the desired
setting and press SELECT/ENTER.
• Some items require additional steps. (See their
respective page.)
When the alternate setting is selected the screen returns to
the Initial Settings display.
To exit SETUP menu
Press SETUP, RETURN or PLAY.
INITIAL SETTINGS
PAGE 33
Selecting Disc Languages
To select the audio soundtrack language, subtitle
language and the language used in title menus
or DVD menus.
1
At the setup screen, press D/E to select
“Disc Audio” and press G.
When you play back a DVD video disc, the DVD
player automatically displays the pre-selected
subtitle language if it is included on the disc.
2
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Password
Spanish
TV Aspect
Italian
Menu Language
Chinese
Progressive
Polish
Digital Audio Output
Hungarian
5.1 Speaker Setup
Russian
Others
Other — — — —
Press D/E to select the desired language and
then press SELECT/ENTER.
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Password
Spanish
TV Aspect
Italian
Menu Language
Chinese
Progressive
Polish
Digital Audio Output
Hungarian
5.1 Speaker Setup
Russian
Others
Other — — — —
Original :The native, or default language of each disc will be
selected.
English : English will be Selected.
Other : Another language can be selected. You can input a
4-digit language code. (Refer to the language
codes on page 40. Press CLEAR if an incorrect
language code is entered.)
The “Disc Subtitle” and “Disc Menu” settings are selected by
the same method.
Note
❍
If the language selected is not available on the disc, the native, or
default language designated by each disc will be selected.
PAGE 34
INITIAL SETTINGS
Selecting Rating Level and Password
To prohibit the playing of specified DVDs
which are unsuitable for children.
● Some DVD discs contain a restriction level
which enables parents to remove scenes or
prevent playback of discs by children. DVD
players are equipped with a password
designed to prevent children from changing
the restriction level settings.
Selecting rating level (DVD only)
1
From the SETUP screen, press
“Rating” and press G.
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
5
Password
4
TV Aspect
3
Menu Language
2
Progressive Scan
1
Digital Audio Output
Unlock
D/E
to select
5.1 Speaker Setup
Others
2
Press D/E to select the desired level and
press SELECT/ENTER.
Disc Audio
8 Blocked
Disc Subtitle
7 Blocked
Disc Menu
6
Rating
5
Password
4
TV Aspect
3
Menu Language
2
Progressive Scan
1
Digital Audio Output
Unlock
5.1 Speaker Setup
Others
You cannot play DVD video discs rated higher than the level
you selected unless you cancel the parental lock function.
For example, when you select level 7, discs rated higher than
level 7 are blocked and cannot be played.
The parental lock level is equivalent to the following USA
movie ratings.
Level 7: NC-17
Level 3: PG
Level 6: R
Level 1: G
Level 4: PG 13
• Some titles do not match with the rating level described
above.
For your reference
In order for this DVD Player to maintain a
permanent Parental Lock selection, you must
enter a 4 digit personal security code.
If you change the level and enter a password, playback of all
DVDs with ratings higher than your selection will be blocked,
unless the correct password is entered again. For example: if
you change the level to “5”, the DVD player will not play discs
with ratings of “6”, “7” or “8” unless the correct password is
entered on the remote control.
INITIAL SETTINGS
PAGE 35
Selecting Rating Level and Password (Cont’d)
Setting your password (DVD only)
If you change the rating level to “7” or lower, you must enter
a 4-digit “password” to prevent playback of discs with higher
ratings.
1
At the SETUP screen, press
“Password” and press G.
Disc Audio
New
Disc Subtitle
————
E
to select
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
2
Input a 4-digit password and press
SELECT/ENTER.
Example : 1234
Do not forget your password.
3
Input the 4-digit password again and press
SELECT/ENTER to verify.
Setting is completed.
● The rating is locked. Any disc whose rating is higher than
the setting, cannot be played back unless the correct
password is entered, and parental lock level is modified.
To change/clear memorized password
1
2
At the SETUP screen, press E to select
“Password” and press G.
Input your password and press
SELECT/ENTER.
Disc Audio
Change
Disc Subtitle
Clear
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
3
To change or clear your password, press D/E
to select the “Change” or “Clear” and press
SELECT/ENTER.
To change the rating level/password, follow the steps on
page 34-35 again.
PAGE 36
INITIAL SETTINGS
Selecting TV Aspect
Select the appropriate screen type according to
your TV set; conventional size screen (4:3) or
wide-screen (16:9).
1
At the SETUP screen, press D/E to select “TV
Aspect” and press G.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
2
2
1, 2
Press D/E to select the desired Aspect and
press SELECT/ENTER.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Rating
Password
TV Aspect
Menu Language
Digital Audio Output
Others
4:3 Letterbox : Select when a conventional TV set is
connected widescreen. Video material not formatted to the
Pan & Scan style is played back in the letterbox style (black
bands appear at top and bottom of screen).
4:3 Panscan : Select when a conventional TV set is
connected widescreen. Video material formatted in the Pan &
Scan style is played back in that style (Full screen display).
However, the left and right edges of the original theatrical
presentation will be cropped off.
4:3 Letterbox
16:9 Wide : Select when a wide-screen TV set is connected.
Played in “FULL” size. (Setting the wide-screen TV to “FULL”
mode is also necessary.) Displays a full widescreen picture or
slightly letterboxed picture depending upon the aspect ratio of
the original theatrical content.
Cut Off
4:3 Panscan
* Each screen shows an example when the video material
for a wide-screen is played.
16:9 Wide
INITIAL SETTINGS
PAGE 37
Selecting Menu Language
Selects language for SETUP menus and onscreen displays.
1
From the SETUP screen, press D/E to select
“Menu Language” and press G.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
2
Press D/E to select the desired Language and
press SELECT/ENTER.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
PAGE 38
INITIAL SETTINGS
Selecting Digital Audio Output
Each DVD disc has a variety of audio output
options. Set the player’s Digital Audio Output
according to the type of audio system you use.
1
At the SETUP screen, press D/E to select
Digital Audio Output and press G.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Password
Sample Freq.
TV Aspect
48 KHz
Menu Language
96KHz
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
2
Press D/E to select the desired output and
press SELECT/ENTER.
You can select Digital Audio Output or Sampling
Frequency item by pressing SELECT/ENTER.
2
1, 2
■ Digital Audio Output
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if
an active digital output is supplied to a Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
Stream/PCM: Select “Stream/PCM” if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
PCM: Select “PCM” if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
■
OUTPUT
Playback
Disc
Stream/PCM
Dolby Digital/
PCM
PCM only
96 kHz
Linear PCM
DVD
PCM
PCM
PCM
DTS DVD
DTS bit Stream
DTS bit Stream
DTS bit Stream
Dolby Digital
DVD
Dolby Digital
bit Stream
Dolby Digital
bit Stream
PCM
MPEG DVD
MPEG bit Stream PCM
PCM
Audio CD/
Video CD
PCM
PCM
PCM
DTS Audio CD
DTS bit Stream
DTS bit Stream
DTS bit Stream
Sampling Frequency
To change the Sample Frequency setting, first select the
desired digital audio output type as indicated above.
If your A/V receiver or surround processor is NOT capable of
handling 96kHz signals, select the 48kHz option. When this
choice is made, this unit will automatically convert any 96kHz
signals to a 48kHz output so that your system is capable of
decoding them.
If your A/V receiver or surround processor is capable of
handling 96kHz signals, select the 96kHz option. When this
choice is made, this unit will pass each type of signal through
without any further processing.
Notes
❍
❍
❍
When you are not using the player’s digital audio output, don’t
select any of the options.
If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding capability, a very loud noise may be produced which could
permanently damage the speakers.
The DTS DVD disc sound is played back only when the DVD
player is connected to a receiver with a DTS decoder.
INITIAL SETTINGS
PAGE 39
Others (DRC/Vocal/PBC)
The DRC, Vocal and PBC settings can be
changed.
1
At the SETUP screen, press D/E to select
“Others” and press G.
Disc Audio
DRC On
Disc Subtitle
Vocal On
Disc Menu
PBC On
Rating
Password
TV Aspect
Menu Language
Progressive
Digital Audio Output
5.1 Speaker Setup
Others
2
Press D/E to select the desired items and
press SELECT/ENTER.
The setting of the selected item are changed between
On and Off.
■
DRC (Dynamic Range Compression) On/Off
On: Select this option to turn on the Dynamic Range
Compression circuitry so that dialogue remains clear
even at low volume levels.
Off: Select this option to turn off the Dynamic Range
Compression and have the soundtrack presented
exactly as it was created.
■
Vocal On/Off
Set to On only when a multi-channel karaoke DVD is
being played. The karaoke channels on the disc will then
be mixed into a normal stereo sound.
■
PBC On/Off
Set Playback Control (PBC) to On or Off
On: Video CDs with PBC are played back according to
the PBC.
Off: Video CDs with PBC are played back in the same
way as Audio CDs.
About DRC (Dynamic Range Compression)
With the DVD format you have the opportunity to listen to
program’s soundtrack in the most accurate and realistic
presentation possible, thanks to the use of digital audio
technology. However, in certain instances you may wish to
slightly compress the dynamic range of the audio output
(the difference between the loudest sounds and the
quietest ones) so that you may listen to a movie at a lower
volume and still retain dialogue intelligibility.
Notes
❍
❍
❍
The DRC function works only during playback of Dolby Digital
recorded discs.
The level of Dynamic Range Compression may vary depending
on the DVD disc.
When playing karaoke, connect appropriate audio equipment
(such as an amplifier) to the DVD video player.
PAGE 40
INITIAL SETTINGS
Table of Languages and Their Abbreviations
Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (See page 33).
Code
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonian
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Rumanian
8679
Volapük
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
REFERENCE
PAGE 41
Disc Requirements/Copyright Information
Playable Discs
This DVD player can play back the following discs.
Disc mark
Contents
Disc size
12 cm
DVD video discs
Audio+Video
(moving pictures)
Maximum playback time
Approx. 4 hours (single sided disc)
Approx. 8 hours (double sided disc)
8 cm
Approx. 80 minutes (single sided disc)
Approx. 160 minutes (double sided disc)
Video CDs
Audio+Video
Audio CDs
Audio
12 cm
74 minutes
8 cm
20 minutes
12 cm
74 minutes
8 cm
20 minutes
CD-R/RW discs are also available.
You cannot playback discs other than those listed above. (CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs
can not be played on this DVD player.)
CD-R/RW discs recorded by CD-DA method can be played. Some CD-R/RW discs may be incompatible.
You cannot play discs of DVD-RAM, DVD-RW, etc., even if they may be labeled marks listed above.
Region Management Information
Region Management Information: This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD player, this DVD player cannot play that disc.
The Region number of this DVD player is 1.
1
Notes on Unauthorized Discs
You may not be able to play back some DVD video discs on this player if they were purchased from outside your
geographic area or made for business purposes.
When you try to play back an unauthorized disc, “Check Regional Code” appears on the TV screen.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material
without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
PAGE 42
REFERENCE
Before Calling Service Personnel
Symptoms and Correction
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Cause
Correction
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
The power is on, but
the DVD player does
not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
lit.)
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode
on the TV so the picture from the DVD
player appears on the TV screen.
• The video cable is not connected
securely.
• Connect the video cable into the jacks
securely.
• The connected TV power is turned off.
• Turn on the TV.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
• The audio cables are not connected
securely.
• Connect the audio cable into the jacks
securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with
the audio cable.
• The Digital Audio Output is set to the
wrong position.
• Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing the POWER
button.
The playback picture is poor.
• The disc is dirty.
• Clean the disc.
The DVD player does
not start playback.
• No disc is inserted.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• The disc is placed upside down.
• Place the disc with the playback side
down.
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off the
menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
• The remote control is not pointed at the
remote sensor of the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
• The remote control is too far from the
DVD player.
• Operate the remote control within about
23 ft (7 m).
• There is an obstacle in the path of the
remote control and the DVD player.
• Remove the obstacle.
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
No sound.
The remote control
does not work properly.
REFERENCE
PAGE 43
Specifications
[Supplied
Accessories]
[Outputs]
[DVD player]
DVD player/Outputs/Supplied Accessories
Power supply
AC 120V, 60 Hz
Power consumption
16 W
Weight
12.6 lbs (5.7 kg)
External dimensions (W X H X D)
17” X 4.7” X 15.1” (430 x 118 x 381 mm)
Signal system
NTSC
Laser
Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)
Frequency range (audio)
4 Hz to 20 kHz
Signal-to-noise ratio (audio)
More than 100 dB (EIAJ)
Dynamic range (audio)
More than 90 dB (EIAJ)
Harmonic distortion (audio)
0.008 %
Wow and flutter
Below measurable level (less than + 0.001 % (W.PEAK)) (EIAJ)
Operating conditions
Temperature: 41°F to 95°F, Operation status: Horizontal
Video output
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
S-video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω
Audio output (digital audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
Audio output (analog audio)
2.0 Vrms(1 KHz, 0 dB), 330 Ω, RCA jack (L, R) x 2
●
Video cable ................................................................................................1
●
Audio cable ................................................................................................1
●
Remote control...........................................................................................1
●
Batteries .....................................................................................................2
❋ Designs and specifications are subject to change without notice.
PAGE 44
OTHERS
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift from the original purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty
TACP/THI warrant this product against defects in materials or
workmanship for a period of ninety (90) days after the date of
original retail purchase. During this period, TACP/ THI will
repair or replace a defective product or part, at their option,
with a new or refurbished product or part without charge to
you. You must deliver the entire product to a TACP/THI
Authorized Service Station. You are responsible for all transportation and insurance charges for the unit to and from the
Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this period, TACP/THI will repair or replace a defective product or part,
at their option, with a new or refurbished product or part without charge to you, except that if a defective part is replaced
after ninety (90) days from the date of the original retail purchase you pay labor charges involved in the replacement. You
must also deliver the entire product to a TACP/THI Authorized
Service Station. You are responsible for all transportation and
insurance charges for the unit to and from the Authorized
Service Station. If you live in the U.S.A. you may, at your
option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Rental Units
The warranty for rental units begin with the first rental or thirty
(30) days from the date of shipment to the rental firm, whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before operating this product. You should complete and mail the enclosed
Demographic card within ten (10) days after you, or the person
who has given you this product as a gift, purchased this product. This is one way to enable TACP to provide you with better
customer service and improved products. Failure to return the
card will not affect your rights under this warranty.
Your Responsibility
The above warranties are subject to the following conditions:
(1) You must retain your bill of sale or provide other proof of
purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a defective
product or part.
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is purchased and operated in the Continental U.S.A. or Puerto
Rico.
(5) Labor service charges for set installation. Set up, adjustment of customer controls and installation or repair of
antenna systems are not covered by this warranty.
Reception problems caused by inadequate antenna systems are your responsibility.
(6) Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or
parts which have been lost or discarded by you or to damage to products or parts caused by misuse, accident, damage caused by Acts of God, such as lighting or fluctuations
in electric power, improper installation, improper maintenance or use in violation of instructions furnished by us; or
to units which have been altered or modified without authorization of TACP/THI/TCL or to damage to products or part
thereof which have had the serial number removed,
altered, defaced or rendered illegible.
(7) Should you elect to return your DVD Unit to TACP after the
ninety (90) days and within one (1) year, or after the warranty period has expired: Call (800)-631-3811 to receive
information concerning an exchange price. Payment must
be enclosed with product in the form of a certified check or
money order including reason for return.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and will
be returned as received.
(Continued)
OTHERS
PAGE 45
LIMITED WARRANTY DVD VIDEO PLAYER (Cont’d)
How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30) days
after you find a defective product or part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center. Products
shipped to the Service Station must be insured and safely and securely packed, preferably in the original shipping carton,
and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be enclosed.
In the Continental United States contact:
Toll Free
800-631-3811
In Hawaii contact:
Toshiba Hawaii Inc.
327 Kamakee Street
Honolulu, HA 96814
(808)-521-5377
In Canada contact:
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
Consumer Electronics Group
1643 North Service Road
Droval, QC H9P 1J1
(514)-856-4100
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law
as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for
consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising under the
warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date
you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states
do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this
completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product must be
purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not covered by
these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.
P/NO: 3834RS0020D
Printed in Korea