CE-(X)IPS
High-Power PoE
Mid-Span
Power Injectors
DESCRIPTION
FEATURES
The CE-8IPS and CE-16IPS are 8 and 16 port high power PoE midspans.
They are compatible with 10/100/1000 BaseT Ethernet networks.
• 8 or 16 ports of IEEE 802.3 af and IEEE 802.3 at compliant POE for
10/100/1000 Base-T networks
They meet IEEE 802.3af and IEEE 802.3at standards and deliver up
to 37 W per port simultaneously on all ports without requiring power
management. The PoE function can be set up with Windows GUI or
use the default plug and play option. These mid-span power injectors
are equipped with LEDs to provide operational status. No IP settings or
configurations are required and they are completely transparent to the
Ethernet network and higher layer protocols.
•Delivers up to 37 W per port simultaneously on all ports, no power
The CE-8IPS and CE-16IPS models are 1 RU high and can be easily
installed in 19” racks. They are ideal for a wide range of CCTV or IT
applications that require high power such as IP cameras, wireless access
points or VoIP to be connected to a central LAN switching fabric with
ease.
• 19", 1U rack or wall mountable
management required
• Automatically senses the powered device (PD) power class
•LEDs indicate power on each port
• Provide high data rate and high power for long distance, ideal for
megapixel cameras
• Fully transparent to Ethernet networks and higher layer protocols
• Easy set up with Windows GUI with default plug and play option
• No IP address programming or other network setup required
APPLICATIONS
• Powering remote IP cameras
• Powering VoIP Phones
• Powering wireless access points
www.vicon-security.com
High-Power PoE
Mid-Span Injectors
CE(-X)IPS
SPECIFICATIONS
Electrical
Mechanical
Ethernet Interface: 10/100/1000BaseT
UTP:Cat-5
Output Power:52 VDC, 37 W max per port
CE-8IPS: 300 W max, aggregated
CE-16IPS: 600 W max, aggregated
Input Power:
110-240 VAC, 50-60Hz @ 6.5A, max
Dimensions (H x W x L):
1.75 × 17× 12 in;
(44.5 × 432 × 305 mm)
Weight: 9.5 lb (4.3 kg)
Shipping Weight:
10.6 lb (4.8 kg)
Case Material: Aluminum
Environmental
Status Indicating LEDs: Output
Power
Connectors: Ethernet: RJ-45
Extended Output: RJ-45
Operating Power: IEC380-8
Setup Port: RS-232/USB with
Windows® GUI.
Operating Temp: 14°F to +122°F (-10°C to +50°C)
Storage Temp: -22°F to +158°F (-30°C to +70°C)
Relative Humidity: 0 to 95%, non-condensing
* Distance figures are obtained using in-house testing mirroring installations.
Factors such as coaxial cable quality, the number of connectors in the cable
run, the use of PoE, and environmental conditions encountered within the
installation may affect the actual transmission distance, and should be taken into
consideration.
DIMENSIONS
1.75"
(44.5 mm)
17" (432 mm)
ORDERING INFORMATION
Part Number
Description
Output Power
CE-8IPS
8 Port High-Power PoE Mid-Span Injector
300 W Max Aggregated
CE-16IPS
16 Port High-Power PoE Mid-Span Injector
600 W Max Aggregated
Accessories
19-inch rack-mounting ear brackets (included)
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration,
humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control
Equipment.
TYPICAL APPLICATION
Network Switch
IP Devices
Cat5
CE-16IPS
...
Cat5
...
PoE
IP Camera
VoIP
Phone
T: 631.952.2288 | F: 631.951.2288 | 1-800-645-9116
TECH SUPPORT: 1.800.34.VICON (1.800.348.4266) | UK: +44(0) 1489.566300 | www.vicon-security.com
Product specifications subject to change without notice.
© 2014 Vicon Industries Inc. All Rights Reserved. Vicon Industries Inc. and its logo are registered trademarks of Vicon Industries Inc.
Rev 1211