Patch panel KS 24x for 24 modules with Keystone fitting shielded Patch panel KS 24x, shielded Blank covers, black and white DESCRIPTION Shielded 19”/1U patch panel for up to 24 modules with Keystone fitting. Snap-in modules can be easily fitted into the patch panel. Unused ports can be covered with blank covers. For the modules PS-GG45 7A Datwyler recommends the patch panel MGK 24x. Front panel made of flame retardant compound, UL94V-0 rated, in combination with stainless steel and a cable strain relief. Front in grey, similar to RAL 7035, or in black, similar to RAL 9005. Strain relief with tie wrap. Delivery without modules. APPLICATION Suitable for the following Datwyler modules: - RJ45 module KS-T Plus 1/8 Cat. 6A shielded - RJ45 module KS-TS 1/8 Cat. 6/EA shielded - RJ45 module KS-T 1/8 Cat. 6/EA shielded - RJ45 module KU-T 1/8 Cat. 6 / Cat. 5e unshielded - RJ45 module MS-C6A 1/8 Cat. 6A 180°-K shielded DIMENSIONS Width Depth Height 482 mm (19‘‘) 160 mm (including cable strain relief) 44 mm (1U) VERSIONS Article No. Product Colour (similar to) PU 418019 Patch panel KS 24x, 19‘‘/1U , for 24x RJ45 Keystone modules, FTP (delivery without modules) black, RAL 9005 1 pc. 418020 Patch panel KS 24x, 19‘‘/1U , for 24x RJ45 Keystone modules, FTP (delivery without modules) light grey, RAL 7035 1 pc. 418010 Blank cover for Keystone openings white 10 pcs. 418011 Blank cover for Keystone openings black 10 pcs. as of 16.02.2016 Subject to technical modification.