Shredder Catalog-Rev 2-inc FD 8900B.indd

Features of the 8000 Series Shredders
Hardened
Cutting
Mechanism
Auto Start
The optical sensor detects paper fed
into the shredder and starts
operation automatically.
Cutting blades are made of
heat-treated steel, and specially
ground for longevity.
(Models 8200-8802)
(All Models)
When the waste bin is full,
the motor stops automatically.
(All Models)
(Models 8300-8900)
Manual
Function
Utilized when shredding small sized
paper or OHP films which can’t be
detected by the sensor.
Once shredding is complete,
the motor stops automatically.
(Models 8200-8802)
Safety
Circuit Breaker
Ensures safe and easy operation.
(Models 8300-8900)
(Models 8300-8802)
Door Safety
Auto Sensor
To ensure operator safety,
the motor stops automatically
if the cabinet door is opened.
(Models 8200-8802)
Auto Sensor
System
High Quality
Geared-Motors
Powerful, efficient
AC geared-motors with
heavy-duty steel gears for high
performance and minimal noise.
Auto Stop
Cutter
Auto Stop
Auto Reverse
In case of a paper jam,
built-in controls switch the motor
into reverse to clear the jam.
If shredding is continuous for
more than 30 minutes, the cutter
revolution stops automatically.
(Models 8300-8802)
(Models 8200-8700)
Auto Cleaning
Self-Diagnosis
System
In the event shred capacity is
decreased, press reverse button
for 5 seconds; shredder will run in
reverse for 1 minute.
Records operation time, number of
auto-reverse sequences, volume of
paper shredded, and can display
information for service technicians.
(Models 8400-8802)
(Models 8400-8802)
Optical Sensor
Sensitivity
Recovery
Heavy-Duty Steel Gears
In the event the optical sensor
loses its sensitivity, press the
stop button for 7 seconds,
and the sensor will reset.
Specially Hardened Steel Shredding Blades
(Models 8300-8700)
Powerful & Efficient AC Geared-Motor
Formax Warranty
High Quality All-Metal Cabinet
• 10-year limited warranty on cross-cut and
strip-cut cutting head
• 1-year warranty on all other parts
Formax agrees to repair or replace, at its option, any
defective part or component covered by this warranty,
provided there was no abuse and we first receive
written notice of a defect within the applicable
warranty period. This warranty extends only to the
original purchaser and does not include labor or the
payment of any labor charges or incidental or consequential expenses. Warranty claims must be submitted
with replacement part order. All parts are shipped FOB
Dover, NH.
Corporate Office, Sales & Service
Dover, New Hampshire • USA
www.formax.com
January 2007
Deskside
These powerful compact models are as small as a wastebasket and designed for use alongside the desk or work station.
They provide on-the-spot destruction of sensitive paperwork, phone messages and notes generated during the day. Ideal for
use by busy professionals or for the small home office.
FD 8200CC & FD 8200SC
• Auto Start/Stop
• Cross-cut model features 1/16” wide micro-cut
• Special heat-treated steel cutters require minimal oil
• Slide-out waste bin for easy
removal of paper shreds
• Electric safety switch for
cabinet door
• Thermal overload protection
• Accepts staples and paper clips
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
FD 8300CC & FD 8300SC
• Auto Start/Stop & Auto Reverse
• Cross-cut model features 1/16” wide micro-cut
• High-quality metal cabinet with casters
• All-metal gearing
• Electronic safety switch for cabinet door
• Heavy-duty waste bin
• Thermal overload protection
• Special heat-treated steel cutters require minimal oil
• Accepts staples and paper clips
• Strip cut model also accepts CDs and credit cards
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
FD 8200CC
FD 8200SC
Cross Cut
1/16” x 1/2”
4 to 5
16 fpm
8.7”
16” W x 10” D x 20” H
6 gal.
22 lbs.
110V, 50/60 Hz
Strip Cut
1/8”
9 to 10
16 fpm
8.7”
16” W x 10” D x 20” H
6 gal.
22 lbs.
110V, 50/60 Hz
FD 8300CC
FD 8300SC
Cross Cut
1/16” x 5/8”
7 to 8
27 fpm
10”
16” W x 14” D x 26” H
9.5 gal.
88 lbs.
110V, 50/60 Hz
Strip Cut
5/32”
21 to 23
21 fpm
10.6”
16” W x 14” D x 30” H
9.5 gal.
99 lbs.
110V, 50/60 Hz
Office
Our office shredders are built to the highest standards for operator convenience, safety, and reliability in a wide variety of
models. Choices include a range of shred sizes, manual or automatic operation and various sized feed openings. Whatever
the application or security level, Formax Shredders are designed to handle your company’s sensitive and private information.
FD 8400CC & FD 8400SC
• LED Control Panel with load indicator
• Auto Start/Stop, Auto Reverse &
Auto Cleaning
• High-quality metal cabinet with casters
• All-metal gearing
• Electronic safety switch for cabinet door
• Heavy-duty waste bin
• Thermal overload protection
• Special heat-treated steel cutters require
minimal oil
• Accepts staples, paper clips & credit cards
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
FD 8400SC
Cross Cut
5/32” x 1-1/5”
18 to 20
30 fpm
12.2”
20” W x 20” D x 34” H
20 gal.
176 lbs.
110V, 50/60 Hz
Strip Cut
1/4”
30 to 32
30 fpm
12.2”
20” W x 20” D x 34” H
20 gal.
176 lbs.
110V, 50/60 Hz
FD 8500CC
FD 8500SC
Cross Cut
5/32” x 1-1/5”
16 to 18
33 fpm
16”
24” W x 20” D x 35” H
26 gal.
242 lbs.
110V, 50/60 Hz
Strip Cut
5/32”
20 to 22
33 fpm
16”
24” W x 20” D x 35” H
26 gal.
242 lbs.
110V, 50/60 Hz
LED Control Panel
with load indicator
FD 8500CC & FD 8500SC
• LED Control Panel with load indicator
• Auto Start/Stop, Auto Reverse & Auto Cleaning
• Extra-wide 16” feed opening
• High-quality metal cabinet with casters
• All-metal gearing
• Electronic safety switch for cabinet door
• Heavy-duty waste bin
• Thermal overload protection
• Special heat-treated steel cutters require minimal oil
• Accepts staples, paper clips & credit cards
FD 8400CC
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
FD 8600CC & FD 8600SC
• LED Control Panel with load indicator
• Auto Start/Stop, Auto Reverse & Auto Cleaning
• Extra-wide 16” feed opening
• High-quality metal cabinet with casters
• All-metal gearing
• Electronic safety switch for cabinet door
• Heavy-duty waste bin
• Thermal overload protection
• Special heat-treated steel cutters require minimal oil
• Accepts staples, paper clips & credit cards
FD 8700CC
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
FD 8600CC
FD 8600SC
Cross Cut
5/32” x 1-1/5”
26 to 28
20 fpm
16”
24” W x 20” D x 35” H
26 gal.
242 lbs.
110V, 50/60 Hz
Strip Cut
1/4”
29 to 31
30 fpm
16”
24” W x 20” D x 35” H
26 gal.
242 lbs.
110V, 50/60 Hz
Multimedia & Paper
FD 8700CC
• Dedicated multimedia feed opening shreds CDs, DVDs, mini-DV
cassettes, and ZIP/floppy disks
• Dedicated paper feed opening handles up to 35-40 sheets
• LED Control Panel with load indicator
• Auto Start/Stop, Auto Reverse & Auto Cleaning
• High-quality metal cabinet with casters
• All-metal gearing
• Electronic safety switch for cabinet door
• Thermal overload protection
• Heavy-duty waste bin
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
Cross Cut
5/32” x 1-5/8”
35 to 40
11 fpm
9.4”
18” W x 18” D x 30” H
14 gal.
167 lbs.
110V, 50/60 Hz
Industrial
These high capacity machines are designed for large volume shredding in a central location and can serve the needs of an
entire organization. Conveyor-fed models are powerful enough to shred just about anything including entire files, stacks of
computer forms, cardboard, tapes, ribbons, CDs and magnetic disks.
FD 8802CC
FD 8802CC & FD 8802SC
• LED Control Panel with load indicator
• High-volume industrial conveyor-fed model for
centralized shredding
• Auto Start/Stop, Auto Reverse & Cleaning
• Front waste bin access allows the FD 8802 to be
placed against a wall
• Shreds entire files, stacks of computer forms,
cardboard, tapes, ribbons and CDs
• All-metal gearing
• Strip-cut model shreds up to 125 sheets at once
• Large safety bar to stop operation
• Key lock for maximum safety control
• Thermal overload protection
• Heat-treated solid steel cutting blades
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin Capacity:
Weight:
Power Supply:
Cross Cut
Strip Cut
1/4” x 2”
1/2”
75 to 90 *
105 to 125 *
Up to 40 fpm
Up to 50 fpm
16”
16”
29” W x 49” L x 47” H 29” W x 53” L x 51” H
36 gal.
49 gal.
661 lbs.
727 lbs.
3-Phase, 220V, 50/60Hz
* Sheet capacity may vary due to variations in paper & power supply.
FD 8802CC & FD 8802SC
LED Control Panel
with load indicator
FD 8900CC
FD 8900CC & FD 8900B
• FD 8900CC Industrial Conveyor Shredder for
high-volume centralized shredding
• FD 8900B Industrial Shredder & Baler System
compacts shredded material into a bale,
to reduce the frequency of emptying
• Front waste bin access allows the FD 8900CC
to be placed against a wall
• Shreds up to 500 sheets at once
• Shreds entire files, stacks of computer forms,
tapes, cardboard, ribbons, CDs, magnetic disks
• Centralized semi-automatic oiling system
• All-metal gearing
• Large safety bar to stop operation
• Variable shred sizes available
• Thermal overload protection
• Heat-treated solid steel cutting blades
• Customized shredding blades available for
special purposes and applications
FD 8802SC
Cutting Style:
Shred Size:
Sheet Capacity:
Speed:
Feed Opening:
Dimensions:
Bin/Bale Cap.:
Weight:
Baler Pressure:
Bale Size:
Bale Weight:
Power Supply:
FD 8900B
Cross Cut
5/16” x 1-1/2” - 3”
Up to 500 *
Up to 35 fpm
21”
47” W x 81” L x 63” H
102 gal.
1,984 lbs.
n/a
n/a
n/a
Cross-Cut
5/16” x 1-1/2” - 3”
Up to 500 *
Up to 35 fpm
21”
47” W x 129” L x 63” H
154 gal. bale
3,086 lbs.
80.8 kN
31” W x 22” L x 19” H
110-154 lbs. (material
dependent)
3-Phase, 220V, 50/60Hz, 50 Amp dedicated
* Sheet capacity may vary due to variations in paper & power supply.