MAN-KEH-P5010R-GB_B.fm Page 1 Friday, October 6, 2000 2:22 PM
Multi-CD control High power cassette player with RDS tuner
2SHUDWLRQ0DQXDO
.(+35
.(+35
.(+35
.(+35%
(1*/,6+
Q
MAN-KEH-P5010R-GB_B.fm Page 2 Friday, October 6, 2000 2:22 PM
&RQWHQWV
,QVWDOODWLRQ 8VLQJWKH&DVVHWWH3OD\HU • Repeat Play
• Blank Skip
• Radio Intercept
&RQQHFWLQJWKH8QLWV 8VLQJ0XOWL&'3OD\HUV .H\)LQGHU • Head Unit ...............................................6
• Steering Remote Controller (CD-SR80) .6
•
•
•
•
Repeat Play
Random Play
Scan Play
Pause
%HIRUH8VLQJ7KLV3URGXFW About This Product ......................................6
About This Manual .......................................6
Precaution ....................................................6
In Case of Trouble .......................................6
When using the 50-Disc Type
Multi-CD Player ..........................................6
%DVLF2SHUDWLRQ To Listen to Music ........................................7
Basic Operation of Tuner .............................7
• Manual and Seek Tuning
• Preset Tuning
• Band
Basic Operation of Cassette Player .............8
• Fast Forward/Rewind and Music Search
• Eject
• Cassette Loading Slot
• Direction Change
Basic Operation of Multi-CD Player .............8
• Track Search and Fast Forward/Reverse
• Disc Search
• Disc Number Search
(for 6-Disc, 12-Disc types)
7XQHU2SHUDWLRQ • Local Seek Tuning
• Best Stations Memory (BSM)
$XGLR$GMXVWPHQW Selecting the Equalizer Curve ................... 15
Entering the Audio Menu ........................... 15
Audio Menu Functions ............................... 15
• Balance Adjustment (FAD)
• Equalizer Curve Adjustment
(EQ-L/EQ-M/EQ-H)
• Loudness Adjustment (LOUD)
• Front Image Enhancer Function (FIE)
• Source Level Adjustment (SLA)
'HWDFKLQJDQG5HSODFLQJWKH
)URQW3DQHO Theft Protection ......................................... 17
• Detaching the Front Panel
• Replacing the Front Panel
,QLWLDO6HWWLQJ Entering the Initial Setting Menu ................ 17
Initial Setting Menu Functions .................... 18
• Changing the FM Tuning Step (STEP)
• Switching the Auto PI Seek (A-PI)
• Switching the AUX Mode (AUX)
2WKHU)XQFWLRQV Using the AUX Source ............................... 18
• Selecting the AUX Source
Cellular Telephone Muting ......................... 18
8VLQJ5'6)XQFWLRQV What is RDS? ..............................................9
Program Service Name Display ...................9
AF Function ................................................10
• Activating/Deactivating the AF Function
PI Seek Function ........................................10
• PI Seek
• Auto PI Seek (for preset station)
Regional Function ......................................10
• Activating/Deactivating the REG Function
TA Function ................................................11
• Activating/Deactivating the TA Function
• Canceling Traffic Announcements
• Adjusting the TA Volume
• TP Alarm Function
PTY Function .............................................12
• PTY Search Setting Function
• PTY Search Function
• PTY Alarm
• Canceling Emergency Announcements
&DVVHWWH3OD\HUDQG&DUH Precaution .................................................. 19
• About the Cassette Player
• About Cassette Tapes
Cleaning the Head ..................................... 19
6SHFLILFDWLRQV (1*/,6+
Installation with the rubber bush ..................3
Removing the Unit .......................................3
MAN-KEH-P5010R-GB_B.fm Page 3 Friday, October 6, 2000 2:22 PM
,QVWDOODWLRQ
1RWH
• Before finally installing the unit, connect the wiring temporarily, making sure it is all
connected up properly, and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from horizontal, the unit might not give its optimum
performance.
,QVWDOODWLRQZLWKWKHUXEEHUEXVK
Dashboard
Holder
After inserting the holder into the dashboard,
then select the appropriate tabs according to the
thickness of the dashboard material and bend
them. (Install as firmly as possible using the top
and bottom tabs. To secure, bend the tabs 90
degrees.)
Rubber bush
Screw
5HPRYLQJWKH8QLW
Insert the supplied extraction keys into
the unit, as shown in the figure, until
they click into place. Keeping the keys
pressed against the sides of the unit,
pull the unit out.
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 4 Friday, October 6, 2000 2:22 PM
&RQQHFWLQJWKH8QLWV
1RWH
*KEH-P5010R
• When this product’s source is switched ON, a control signal is output through the blue/white
lead. Connect to an external power amp’s system remote control or the car’s Auto-antenna
relay control terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect
to the antenna booster power supply terminal.
• When an external power amp is being used with this system, be sure not to connect the blue/
white lead to the amp’s power terminal. Likewise, do not connect the blue/white lead to the
power terminal of the auto-antenna. Such connection could cause excessive current drain
and malfunction.
• To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially,
insulate the unused speaker leads without fail. There is a possibility of short-circuiting if the
leads are not insulated.
• To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the
output side is black. Connect the connectors of the same colors correctly.
• If this unit is installed in a vehicle that does not have an ACC (accessory) position on the
ignition switch, the red lead of the unit should be connected to a terminal coupled with
ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained
when you are away from the vehicle for several hours.
ACC position
No ACC position
• The black lead is ground. Please ground this lead separately from the ground of high-current
products such as power amps.
If you ground the products together and the ground becomes detached, there is a risk of
damage to the products or fire.
• Cords for this product and those for other products may be different colors even if
they have the same function. When connecting this product to another product, refer
to the supplied Installation manuals of both products and connect cords that have
the same function.
(1*/,6+
• This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in
a recreational vehicle, truck, or bus, check the battery voltage.
• To avoid shorts in the electrical system, be sure to disconnect the - battery cable before
beginning installation.
• Refer to the owner’s manual for details on connecting the power amp and other units, then
make connections correctly.
• Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive
tape around them where they lie against metal parts.
• Route and secure all wiring so it cannot touch any moving parts, such as the gear shift,
handbrake, and seat rails. Do not route wiring in places that get hot, such as near the heater
outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring shortcircuiting to the vehicle body.
• Don’t pass the yellow lead through a hole into the engine compartment to connect to the
battery. This will damage the lead insulation and cause a very dangerous short.
• Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
• Never feed power to other equipment by cutting the insulation of the power supply lead of
the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing
overheating.
• When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.
• Since a unique BPTL circuit is employed, never wire so the speaker leads are directly
grounded or the left and right - speaker leads are common.
• Speakers connected to this unit must be high-power types with minimum rating of 45 W
(50 W)* and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance
values other than those noted here may result in the speakers catching fire, emitting smoke,
or becoming damaged.
MAN-KEH-P5010R-GB_B.fm Page 5 Friday, October 6, 2000 2:22 PM
&RQQHFWLQJWKH8QLWV
This product conforms to new cord colors.
Rear output
This product
Antenna jack
1RWH
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
A
Connecting cords with RCA pin plugs
(sold separately)
IP-BUS input (Blue)
Fuse
Yellow/black
If you use a cellular telephone, connect it via the Audio
Mute lead on the cellular telephone. If not, keep the Audio
Mute lead free of any connections.
Multi-CD player
(sold separately)
IP-BUS cable
B
B
Blue/white
To system control terminal of the
power amp (Max. 300 mA 12 V DC).
Connect leads of the
same color to each other.
Cap (1*)
When not using this terminal,
do not remove the cap.
C
Yellow (3*)
Back-up
(or accessory)
Power amp
(sold separateley)
A
System remote control
C
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Rear speaker (Left)
Red (5*)
Accessory
(or back-up)
Rear speaker (Right)
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
D
Black (ground)
To vehicle (metal) body.
Speaker leads
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
: Front left +
: Front left : Front right +
: Front right : Rear left +
: Rear left : Rear right +
: Rear right -
Perform these connections when using a
different amp (sold separately).
D
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay control terminal (max. 300 mA 12 V DC).
ISO connector
1RWH
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to connect
to both connectors.
(1*/,6+
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another type
of vehicle, never connect 6* and 7*.
MAN-KEH-P5010R-GB_B.fm Page 6 Friday, October 6, 2000 2:22 PM
.H\)LQGHU
%HIRUH8VLQJ7KLV3URGXFW
$ERXW7KLV3URGXFW
+HDG8QLW
EQ button
LOCAL/BSM button
• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE
Marking Directive (93/68/EEC).
EJECT button
Cassette door
AUDIO button
BAND button
Detach button
TA button
Buttons 1 – 6
SOURCE button
8/2/4/6 buttons
PTY button
6WHHULQJ5HPRWH&RQWUROOHU&'65
The steering remote controller (CD-SR80) is an option only for KEH-P5010R.
8/2 buttons
SOURCE/OFF button
4/6 buttons
AUDIO button
This product features a number of sophisticated functions ensuring superior reception
and operation. All are designed for the easiest possible use, but many are not selfexplanatory. This operation manual is intended to help you benefit fully from their
potential and to maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by
reading through the manual before you begin using this product. It is especially
important that you read and observe the “Precaution” on this page and in other
sections.
This manual explains head unit operation. You can perform the same operations with
the steering remote controller when operating KEH-P5010R.
•
•
•
•
•
+/– button
FUNCTION button
Not Used.
$ERXW7KLV0DQXDO
3UHFDXWLRQ
ATT button
This lets you quickly
lower volume level
(by about 90%).
Press once more to
return to the original
volume level.
BAND button
The tuner frequencies on this product are allocated for use in Western Europe, Asia,
the Middle East, Africa and Oceania. Use in other areas may result in improper
reception. The RDS function operates only in areas with FM stations broadcasting
RDS signals.
The Pioneer CarStereo-Pass is for use only in Germany.
Keep this manual handy as a reference for operating procedures and precautions.
Always keep the volume low enough for outside sounds to be audible.
Protect this product from moisture.
If the battery is disconnected, the preset memory will be erased and must be
reprogrammed.
,Q&DVHRI7URXEOH
Should this product fail to operate properly, contact your dealer or nearest authorized
Pioneer Service Station.
:KHQXVLQJWKH'LVF7\SH0XOWL&'3OD\HU
The available functions of the 50-Disc Type Multi-CD Player are described in this
Operation Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be
used with this product.
(1*/,6+
+/– buttons
MAN-KEH-P5010R-GB_B.fm Page 7 Friday, October 6, 2000 2:22 PM
%DVLF2SHUDWLRQ
7R/LVWHQWR0XVLF
%DVLF2SHUDWLRQRI7XQHU
The following explains the initial operations required before you can listen to music.
This product’s AF function can be switched ON and OFF. AF should be switched OFF
for normal tuning operations. (Refer to page 10.)
1RWH
• Loading a cassette in this product. (Refer to page 8.)
0DQXDODQG6HHN7XQLQJ
6HOHFWWKHGHVLUHGVRXUFHHJ7XQHU
*
<RXFDQVHOHFWWKHWXQLQJPHWKRGE\FKDQJLQJWKHOHQJWKRIWLPH\RX
SUHVVWKH
Each press changes the Source ...
4/6EXWWRQ
Manual Tuning (step by step)
0.5 seconds or less
Seek Tuning
0.5 seconds or more
1RWH
• If you continue pressing the button for longer than 0.5 seconds, you can skip
broadcast stations. Seek Tuning starts as soon as you release the button.
• Stereo indicator “%” lights when a stereo station is selected.
Each press of the SOURCE button selects the desired source in the following order:
Tuner ] Tape ] Multi-CD player ] External Unit ] AUX
1RWH
• External Unit refers to a Pioneer product (such as one available in the future) that, although
incompatible as a source, enables control of basic functions by this product. Only one
External Unit can be controlled by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no tape is set in this product.
* When no magazine is set in the Multi-CD player.
* When the AUX (external input) is set to OFF. (Refer to page 18.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control
terminal, the car's Auto-antenna extends when this product's source is switched ON. To
retract the antenna, switch the source OFF.
)UHTXHQF\,QGLFDWRU
%DQG,QGLFDWRU
3UHVHW1XPEHU,QGLFDWRU
5DLVHRUORZHUWKHYROXPH
7XUQWKHVRXUFH2))
3UHVHW7XQLQJ
*
%DQG
<RXFDQPHPRUL]HEURDGFDVWVWDWLRQVLQEXWWRQV
WKURXJKIRUHDV\RQHWRXFKVWDWLRQUHFDOO
Preset station recall
2 seconds or less
Broadcast station preset memory
2 seconds or more
1RWH
• Up to 12 FM stations (6 each in F1 (FM1) and F2 (FM2)) and 6 MW/LW stations
can be stored in memory.
• You can also use the 8 or 2 buttons to recall broadcast stations memorized in
buttons 1 through 6.
(1*/,6+
Hold for 1 second
F1 (FM1)
] F2 (FM2)
] MW/LW
MAN-KEH-P5010R-GB_B.fm Page 8 Friday, October 6, 2000 2:22 PM
%DVLF2SHUDWLRQ
%DVLF2SHUDWLRQRI&DVVHWWH3OD\HU
%DVLF2SHUDWLRQRI0XOWL&'3OD\HU
*
6EXWWRQVHOHFWV)DVW)RUZDUGRU)RUZDUG0XVLF
(DFKSUHVVRIWKH
7UDFN6HDUFKDQG)DVW)RUZDUG5HYHUVH
6HDUFK
*
FF (Fast Forward) ] F-MS (Forward-Music Search) ] Normal Playback
*
<RXFDQVHOHFWEHWZHHQ7UDFN6HDUFKRU)DVW)RUZDUG5HYHUVHE\
4/6 EXWWRQIRUDGLIIHUHQWOHQJWKRIWLPH
SUHVVLQJWKH
4EXWWRQVHOHFWV5HZLQGRU5HZLQG0XVLF6HDUFK
REW (Rewind) ] R-MS (Rewind-Music Search) ] Normal Playback
(DFKSUHVVRIWKH
1RWH
Track Search
0.5 seconds or less
Fast Forward/Reverse
Continue pressing
1RWH
• Fast Forward/Rewind and Music Search can be canceled by pressing the BAND
button.
• Multi-CD indicator “
” lights when a Multi-CD source is selected.
(MHFW
1RWH
• The Tape function can be
turned ON/OFF with the
cassette tape remaining in this
product. (Refer to page 7.)
7UDFN1XPEHU,QGLFDWRU
'LVF1XPEHU,QGLFDWRU
3OD\7LPH,QGLFDWRU
'LVF6HDUFK
'LVF1XPEHU6HDUFKIRU'LVF'LVFW\SHV
'LUHFWLRQ,QGLFDWRU
'LUHFWLRQ&KDQJH
*
<RXFDQVHOHFWGLVFVGLUHFWO\ZLWKWKHWREXWWRQV-XVWSUHVVWKHQXPEHU
FRUUHVSRQGLQJWRWKHGLVF\RXZDQWWROLVWHQWR
&DVVHWWH/RDGLQJ6ORW
1RWH
• Don’t insert any materials except for
cassette into Cassette Loading Slot.
1RWH
• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the
1 to 6 buttons for 2 seconds.
1RWH
• The Multi-CD Player may perform a preparatory operation, such as verifying the presence
of a disc or reading disc information, when the power is turned ON or a new disc is selected
for playback. “READY” is displayed.
• If the Multi-CD Player cannot operate properly, an error message such as “ERROR-14” is
displayed. Refer to the Multi-CD Player owner's manual.
• If there are no discs in the Multi-CD Player magazine, “NO DISC” is displayed.
(1*/,6+
This product can control a Multi-CD player (sold separately).
)DVW)RUZDUG5HZLQGDQG0XVLF6HDUFK
MAN-KEH-P5010R-GB_B.fm Page 9 Friday, October 6, 2000 2:22 PM
7XQHU2SHUDWLRQ
8VLQJ5'6)XQFWLRQV
:KDWLV5'6"
/RFDO6HHN7XQLQJ
This function selects only stations with especially strong signals.
*
RDS (Radio Data System) is a system for transmitting data along with FM programs.
This data, which is inaudible, provides a variety of features such as: program service
name, program type display, traffic announcement standby, automatic tuning and
program type tuning, intended to aid radio listeners in tuning to a desired station.
6ZLWFKWKH/RFDO212))ZLWKWKH
/2&$/%60EXWWRQ
“LOC”
1RWH
• RDS service may not be provided by all stations.
• RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement
standby), are only active when your radio is tuned to RDS stations.
%HVW6WDWLRQV0HPRU\%60
The BSM function stores stations in memory automatically.
*
3URJUDP6HUYLFH1DPH'LVSOD\
3UHVVWKH/2&$/%60EXWWRQIRU
With this function, the names of networks/stations providing RDS services replace the
frequency on the display a few seconds after they are tuned in.
VHFRQGVWRVZLWFK%6021
The stations with the strongest
signals will be stored under buttons
1– 6 and in order of their signal
strength.
*
*
:KHQ\RXZDQWWRNQRZ37<,QIRUPDWLRQRUWKHIUHTXHQF\RIWKHFXUUHQWVWDWLRQ
FKDQJHWKHGLVSOD\
7RFDQFHOWKHSURFHVVSUHVVWKH/2&$/%60EXWWRQEHIRUHPHPRUL]DWLRQLV
FRPSOHWH
Hold for 2 seconds
Each press of the DISPLAY button for 2 seconds selects the display in the following
order:
Program Service Name ] PTY Information ] Frequency
1RWH
• After switching displays, if you do not perform an operation within 8 seconds, the Program
Service Name is automatically displayed.
)
37<,QIRUPDWLRQ
PTY (Program Type ID code) information for the currently tuned station appears on the
display for 8 seconds. The information is correlated with the list in the section “PTY
Function” on page 12.
1RWH
• If a PTY code of zero is received from a station, “NONE” will be displayed. This indicates
that the station has not defined its program contents.
• If the signal is too weak for this product to pick up the PTY code, “NO PTY” will be displayed.
)UHTXHQF\
The frequency of the current station appears on the display.
(1*/,6+
)
MAN-KEH-P5010R-GB_B.fm Page 10 Friday, October 6, 2000 2:22 PM
8VLQJ5'6)XQFWLRQV
$))XQFWLRQ
3,6HHN)XQFWLRQ
The tuner searches for another frequency broadcasting the same programming. “PI
SEEK” appears on the display and the radio volume is muted during a PI Seek. The
muting is discontinued after completion of the PI Seek, whether or not the PI seek has
succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.
3,6HHN
1RWH
• AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory
with the “AF” indicator ON.
• When you recall a preset station, the tuner may update the preset station with a new
frequency from the station's AF list. (This is only available when using presets on the FM1
band.) No preset number appears on the display if the RDS data for the station received
differs from that for the originally stored station.
• Sound may be temporarily interrupted by another program during an AF frequency search.
• When the tuner is tuned to a non-RDS station, the “AF” indicator flashes.
• AF can be switched ON or OFF independently for each FM band.
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal
is too weak for proper reception, the PI Seek will automatically start.
$XWR3,6HHNIRUSUHVHWVWDWLRQ
When preset stations cannot be recalled, as when traveling long distances, this
product can be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
1RWH
• Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.
$FWLYDWLQJ'HDFWLYDWLQJWKH$))XQFWLRQ
AF is set to ON by default.
*
5HJLRQDO)XQFWLRQ
7XUQ$)WR2))
When AF is used to retune the tuner automatically, REG (regional) limits the selection
to stations broadcasting regional programs.
1RWH
Hold for 2 seconds
“AF” disappears
• Regional programming and regional networks are organized differently depending on the
country (i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station
which differs from the originally set station.
• REG can be switched ON or OFF independently for each FM band.
To turn AF back ON, repeat the preceding operation.
$FWLYDWLQJ'HDFWLYDWLQJWKH5(*)XQFWLRQ
The REG function is set to ON by default.
*
7XUQ5(*WR2))
Hold for 2 seconds
To turn REG back ON, repeat the preceding operation.
(1*/,6+
The AF (Alternative Frequencies search) function is used to search for other
frequencies in the same network as the currently tuned station. It automatically retunes
the receiver to another frequency in the network which is broadcasting a stronger
signal when there are problems with reception of the currently tuned station or better
reception is possible on a different frequency.
MAN-KEH-P5010R-GB_B.fm Page 11 Friday, October 6, 2000 2:22 PM
8VLQJ5'6)XQFWLRQV
7$)XQFWLRQ
&DQFHOLQJ7UDIILF$QQRXQFHPHQWV
The TA (Traffic Announcement standby) function lets you receive traffic
announcements automatically, no matter what source you are listening to. The TA
function can be activated for either a TP station (a station that broadcasts traffic
information) or an enhanced other network’s TP station (a station carrying information
which cross-references TP stations).
*
3UHVVWKH7$EXWWRQZKLOHDWUDIILFDQQRXQFHPHQWLVEHLQJUHFHLYHGWRFDQFHOWKH
DQQRXQFHPHQWDQGUHWXUQWRWKHRULJLQDOVRXUFH
$FWLYDWLQJ'HDFWLYDWLQJWKH7$)XQFWLRQ
The announcement is canceled but the tuner remains in the TA mode until the TA
button is pressed again.
7XQHLQD73RU(2173VWDWLRQ
The “TP” indicator lights when the tuner is tuned to a TP station or an enhanced other
network's TP station.
$GMXVWLQJWKH7$9ROXPH
When a traffic announcement begins, the volume adjusts automatically to a preset
level to enable you to hear the announcement clearly.
$FWLYDWHWKH7$IXQFWLRQ
*
6HWWKHYROXPHE\DGMXVWLQJLWGXULQJUHFHSWLRQRIDWUDIILFDQQRXQFHPHQW
“TA”
The “TA” indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to
deactivate the TA function.
The newly set volume is stored in memory and recalled for subsequent traffic
announcements.
1RWH
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from sources other than tuner if the tuner was last set to
the FM band but not if it was last set to the MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other tuning
functions while listening to sources other than tuner.
• Only TP or EON TP stations are tuned in during the Seek Tuning mode when the “TA”
indicator is ON.
• Only TP or EON TP stations are stored by BSM when the “TA” indicator is ON.
73$ODUP)XQFWLRQ
About 30 seconds after the “TP” indicator is extinguished due to a weak signal, a
5 second beep sounds to remind you to select another TP or EON TP station.
*
,I\RXDUHOLVWHQLQJWRWKHWXQHUWXQHLQDQRWKHU73VWDWLRQRU(2173VWDWLRQ
In sources other than tuner, the tuner automatically seeks out the TP station with the
strongest signal in the current area 10 (or 30)* seconds after “TP” disappears from the
display.
7LPHWDNHQEHIRUH6HHNEHJLQV
TA function ON
10 seconds
TA, AF functions ON
30 seconds
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 12 Friday, October 6, 2000 2:22 PM
8VLQJ5'6)XQFWLRQV
37<)XQFWLRQ
37<6HDUFK6HWWLQJ)XQFWLRQ
(QWHUWKH37<6HDUFKVHWWLQJPRGH
1RWH
• PTY code program types are as follows:
1. NEWS:
News.
2. AFFAIRS:
Current affairs.
3. INFO:
General information and advice.
4. SPORT:
Sports programs.
5. EDUCATE:
Educational programs.
6. DRAMA:
All radio plays and serials.
7. CULTURE:
Programs concerned with any aspect of national or regional culture.
8. SCIENCE:
Programs about nature, science and technology.
9. VARIED:
Light entertainment programs.
10. POP MUS:
Popular music.
11. ROCK MUS:
Contemporary modern music.
12. EASY MUS:
Easy listening music.
13. L. CLASS:
Light classical music.
14. CLASSIC:
Serious classical music.
15. OTH MUS:
Other types of music, which can't be categorized.
16. WEATHER:
Weather reports/Meteorological information.
17. FINANCE:
Stock market reports, commerce, trading etc.
18. CHILDREN:
Children's programs.
19. SOCIAL:
Social affairs programs.
20. RELIGION:
Religion affairs programs or services.
21. PHONE IN:
Phone in based programs.
22. TOURING:
Travel programs, not for announcements about traffic problem.
23. LEISURE:
Programs about hobbies and recreational activities.
24. JAZZ:
Jazz music based programs.
25. COUNTRY:
Country music based programs.
26. NAT MUS:
National music based programs.
27. OLDIES:
Oldies music, 'Golden age' based programs.
28. FOLK MUS:
Folk music based programs.
29. DOCUMENT: Documentary programs.
Hold for 2 seconds
The name of a program type appears on the display for 5 seconds.
1RWH
• “CURRENT” sets desired PTY to the program type of the current station (only for RDS
stations broadcasting PTY information).
6HOHFWRQHRIWKH37<V
:KHQWKHGHVLUHGSURJUDPPLQJW\SHDSSHDUVRQWKHGLVSOD\UHWXUQWRWKH
QRUPDOGLVSOD\
(1*/,6+
The PTY function enables you to select stations by the type of programming they
broadcast (PTY Search). It also provides automatic tuning to emergency broadcasts
(PTY Alarm).
MAN-KEH-P5010R-GB_B.fm Page 13 Friday, October 6, 2000 2:22 PM
8VLQJ5'6)XQFWLRQV
37<6HDUFK)XQFWLRQ
*
8VLQJWKH&DVVHWWH3OD\HU
5HSHDW3OD\
The repeat mode lets you hear the same song over again.
,QLWLDWHD37<VHDUFK
*
6ZLWFKWKH5HSHDW3OD\212))
ZLWKWKH/2&$/%60EXWWRQ
“
”
The tuner searches for a station broadcasting the desired PTY.
1RWH
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station broadcasting the selected programming type is found, “NOTFOUND” is
displayed for about 2 seconds, and the tuner returns to the original station.
%ODQN6NLS
This function fast-forwards to the next song automatically if there is a long period of
silence (12 seconds or longer) between songs.
*
6ZLWFKWKH%ODQN6NLS212))
ZLWKWKHEXWWRQ
37<$ODUP
PTY Alarm is a special PTY code for announcements regarding emergencies such as
natural disasters. When the tuner receives the radio alarm code, “ALARM” appears on
the display and the volume adjusts to the TA volume. When the station stops
broadcasting the emergency announcement, the system returns to the previous
source.
5DGLR,QWHUFHSW
This function allows you to listen to the radio during tape fast-forwarding/rewinding.
1RWH
• The radio intercept function does not work during a Music Search operation.
*
1RWH
6ZLWFKWKH5DGLR,QWHUFHSW
212))ZLWKWKHEXWWRQ
• The system switches back to the original source following emergency announcement
reception.
&DQFHOLQJ(PHUJHQF\$QQRXQFHPHQWV
*
3UHVVWKH7$EXWWRQGXULQJHPHUJHQF\DQQRXQFHPHQWUHFHSWLRQWRFDQFHOWKH
DQQRXQFHPHQWDQGUHWXUQWRWKHSUHYLRXVVRXUFH
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 14 Friday, October 6, 2000 2:22 PM
8VLQJ0XOWL&'3OD\HUV
5HSHDW3OD\
6FDQ3OD\
*
In the Disc Repeat, the beginning of each track on the selected disc is scanned for
about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on
each disc is scanned for about 10 seconds.
6HOHFWWKHGHVLUHGUHSHDWSOD\
UDQJHE\SUHVVLQJWKH/2&$/
3UHVVWKH37<EXWWRQIRU
%60EXWWRQ
VHFRQGVWRVZLWFKWKH6FDQ3OD\
Multi-CD player Repeat ]
One-track Repeat ] Disc Repeat
“
,QGLFDWRU
'LVSOD\
–––
–––
Multi-CD player Repeat
RPT
One-track Repeat
DISC
Disc Repeat
–––
21
”
After selecting the desired repeat
play range from those referred to in
“Repeat Play” on page 14, switch
Multi-CD Player Scan Play ON.
3OD\UDQJH
:KHQ\RXILQGWKHGHVLUHGWUDFN
RUGLVFFDQFHOWKH6FDQ3OD\E\
SUHVVLQJWKH37<EXWWRQIRU
VHFRQGV
1RWH
• If you select other discs during the repeat play, the repeat play range changes to Multi-CD
player Repeat.
• If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat
play range changes to Disc Repeat.
'LVSOD\
3OD\UDQJH
DSCN
Disc Repeat
SCAN
Multi-CD player Repeat
5DQGRP3OD\
1RWH
Tracks are played at random within the selected repeat play range as explained in
“Repeat Play” above.
*
• Scan Play is canceled automatically after all the tracks or discs have been scanned.
• One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.
3UHVVWKH/2&$/%60EXWWRQIRU
VHFRQGVWRVZLWFKWKH5DQGRP
3OD\212))
After selecting the desired repeat
play range from those referred to in
“Repeat Play” above, switch MultiCD Player Random Play ON.
'LVSOD\
3OD\UDQJH
DRDM
Disc Repeat
RDM
Multi-CD player Repeat
1RWH
• One-track Repeat changes to the Disc Repeat when you switch the Random Play ON.
3DXVH
Pause pauses the currently playing track.
*
6ZLWFKWKH3DXVHSOD\212))
ZLWKWKH/2&$/%60EXWWRQ
(1*/,6+
There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD
player Repeat. Default repeat play range is Multi-CD player Repeat.
MAN-KEH-P5010R-GB_B.fm Page 15 Friday, October 6, 2000 2:22 PM
$XGLR$GMXVWPHQW
6HOHFWLQJWKH(TXDOL]HU&XUYH
You can switch between Equalizer curves.
*
3UHVVWKH(4EXWWRQWRVHOHFWWKHGHVLUHG(TXDOL]HUFXUYH
$XGLR0HQX)XQFWLRQV
The Audio Menu features the following functions.
%DODQFH$GMXVWPHQW)$'
This function allows you to select a Fader/Balance setting that provides ideal listening
conditions in all occupied seats.
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH)DGHU%DODQFHPRGH)$'LQWKH$XGLR
“Equalizer curve”
POWERFUL (powerful) ] NATURAL (natural) ] VOCAL (vocal)
] CUSTOM (custom) ] EQ FLAT (flat) ] SPR-BASS (super bass)
1RWH
• “CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Equalizer
Curve Adjustment” on page 15.)
0HQX
$GMXVWIURQWUHDUVSHDNHUEDODQFH
ZLWKWKH8/2EXWWRQV
“FAD F15” – “FAD R15” is displayed
as it moves from front to rear.
$GMXVWOHIWULJKWVSHDNHUEDODQFH
(QWHULQJWKH$XGLR0HQX
With this Menu, you can adjust the sound quality.
ZLWKWKH4/6EXWWRQV
“BAL L 9” – “BAL R 9” is displayed as
it moves from left to right.
1RWH
• “FAD 0” is the proper setting when 2 speakers are in use.
1RWH
• After entering the Audio Menu, if you do not perform an operation within about 30 seconds,
the Audio Menu is automatically canceled.
6HOHFWWKHGHVLUHGPRGHLQWKH$XGLR0HQX
(TXDOL]HU&XUYH$GMXVWPHQW(4/(40(4+
You can adjust the currently selected equalizer curve settings as desired. Adjusted
equalizer curve settings are memorized in “CUSTOM”.
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH(TXDOL]HUPRGH(4/(40(4+LQWKH
$XGLR0HQX
Each press changes the Mode ...
2SHUDWHDPRGH
&DQFHOWKH$XGLR0HQX
6HOHFWWKHEDQG\RXZDQWWRDGMXVW
ZLWKWKH4/6EXWWRQV
EQ-L (low) _ EQ-M (mid)
_ EQ-H (high)
%RRVWRUDWWHQXDWHWKHVHOHFWHG
EDQGZLWKWKH8/2EXWWRQV
The display shows “+6” – “–6”.
• If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted
curve will replace the previous adjusted curve. Then a new curve with “CUSTOM” appears
on the display while selecting the equalizer curve. (Refer to page 15.)
(1*/,6+
“CUSTOM”
1RWH
MAN-KEH-P5010R-GB_B.fm Page 16 Friday, October 6, 2000 2:22 PM
$XGLR$GMXVWPHQW
/RXGQHVV$GMXVWPHQW/28'
6RXUFH/HYHO$GMXVWPHQW6/$
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH/RXGQHVVPRGH/28'LQWKH$XGLR
0HQX
The SLA (Source Level Adjustment) function prevents radical leaps in volume level
when switching between sources. Settings are based on the FM volume level, which
remains unchanged.
&RPSDUHWKH)0YROXPHZLWKWKHYROXPHRIWKHRWKHUVRXUFH
HJ&DVVHWWHSOD\HU
6ZLWFKWKH/RXGQHVVIXQFWLRQ
8/2EXWWRQV
212))ZLWKWKH
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH6/$PRGH6/$LQWKH$XGLR0HQX
“
”
6HOHFWWKHGHVLUHGOHYHOZLWKWKH
4/6EXWWRQV
LOW (low) _ MID (mid)
_ HI (high)
)URQW,PDJH(QKDQFHU)XQFWLRQ),(
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front
imaging by cutting mid- and high-range frequency output from the rear speakers,
limiting their output to low-range frequencies. You can select the frequency you want
to cut.
‡ 3UHFDXWLRQ
When the F.I.E. function is deactivated, the rear speakers output sound of all
frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to
prevent a sudden increase in volume.
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH),(PRGH),(LQWKH$XGLR0HQX
6ZLWFKWKH),(IXQFWLRQ212))
8/2EXWWRQV
ZLWKWKH
6HOHFWWKHGHVLUHGIUHTXHQF\ZLWK
WKH4/6EXWWRQV
100 _ 160 _ 250 (Hz)
1RWH
• After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu,
and adjust front and rear speaker volume levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-speaker system.
,QFUHDVHRUGHFUHDVHWKHOHYHO
ZLWKWKH8/2EXWWRQV
The display shows “+4” – “–4”.
1RWH
• Since the FM volume is the control, SLA is not possible in the FM modes.
• The MW/LW volume level, which is different from the FM base setting volume level, can be
adjusted similar to sources other than tuner.
(1*/,6+
The Loudness function compensates for deficiencies in the low and high sound ranges
at low volume. You can select a desired Loudness level.
MAN-KEH-P5010R-GB_B.fm Page 17 Friday, October 6, 2000 2:22 PM
'HWDFKLQJDQG5HSODFLQJWKH)URQW3DQHO
7KHIW3URWHFWLRQ
The front panel of the main body is detachable to discourage theft.
'HWDFKLQJWKH)URQW3DQHO
(MHFWWKHIURQWSDQHO
,QLWLDO6HWWLQJ
(QWHULQJWKH,QLWLDO6HWWLQJ0HQX
With this menu, you can perform initial settings for this product.
6ZLWFKWKHVRXUFH2))
(QWHUWKH,QLWLDO6HWWLQJ0HQX
Hold for 2 seconds
7RUHPRYHWKHIURQWSDQHOSXOOLWV
ULJKWKDQGVLGHWRZDUG\RX
6HOHFWDGHVLUHGPRGH
Take care not to grip it tightly or
drop it.
Each press changes the Mode ...
8VHWKHSURWHFWLYHFDVHSURYLGHG
WRVWRUHFDUU\WKHGHWDFKHGIURQW
SDQHO
2SHUDWHDPRGH
&DQFHOWKH,QLWLDO6HWWLQJ0HQX
5HSODFLQJWKH)URQW3DQHO
*
5HSODFHWKHIURQWSDQHOE\
FOLSSLQJLWLQWRSODFH
1RWH
• Holding down the AUDIO button for 2 seconds also cancels the Initial Setting Menu.
3UHFDXWLRQ
• Never use force or grip the display tightly when removing or replacing the front panel.
• Avoid subjecting the front panel to excessive shocks.
• Keep the front panel out of direct sunlight and high temperatures.
(1*/,6+
MAN-KEH-P5010R-GB_B.fm Page 18 Friday, October 6, 2000 2:22 PM
,QLWLDO6HWWLQJ
,QLWLDO6HWWLQJ0HQX)XQFWLRQV
2WKHU)XQFWLRQV
8VLQJWKH$8;6RXUFH
An IP-BUS-RCA Interconnector such as CD-RB20 or CD-RB10 (sold separately)
enables you to connect this product to auxiliary equipment featuring an RCA output.
For more details, refer to the IP-BUS-RCA Interconnector’s Owner’s Manual.
It may be preferable to set tuning step to 50 kHz in the AF mode.
6HOHFWLQJWKH$8;6RXUFH
*
6HOHFW$8;5HIHUWRSDJH
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH)07XQLQJ6WHSPRGH67(3LQWKH,QLWLDO
6HWWLQJ0HQX
6HOHFWWKHGHVLUHGWXQLQJVWHS
4/6EXWWRQV
ZLWKWKH
Each press changes the Mode ...
1RWH
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
6ZLWFKLQJWKH$XWR3,6HHN$3,
During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to “PI Seek Function” on page 10.)
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH$XWR3,6HHNPRGH$3,LQWKH,QLWLDO
6HWWLQJ0HQX
6ZLWFKWKH$XWR3,6HHN
8/2EXWWRQV
212))ZLWKWKH
6ZLWFKLQJWKH$8;0RGH$8;
It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
3UHVVWKH$8',2EXWWRQDQGVHOHFWWKH$8;6HWWLQJPRGH$8;LQWKH,QLWLDO
6HWWLQJ0HQX
6ZLWFKWKH$8;212))ZLWKWKH
8/2EXWWRQV
&HOOXODU7HOHSKRQH0XWLQJ
Sound from this system is muted automatically when a call is made or received using
a cellular telephone connected to this product.
• The sound is turned off, “MUTE” is displayed and no audio adjustment is possible.
Operation returns to normal when the phone connection is ended.
(1*/,6+
The Initial Setting Menu features the following functions.
&KDQJLQJWKH)07XQLQJ6WHS67(3
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes
to 100 kHz when the AF or TA mode is activated.
MAN-KEH-P5010R-GB_B.fm Page 19 Friday, October 6, 2000 2:22 PM
&DVVHWWH3OD\HUDQG&DUH
3UHFDXWLRQ
$ERXWWKH&DVVHWWH3OD\HU
• A loose or warped label on a cassette tape may interfere with the eject mechanism
of the unit or cause the cassette to become jammed in the unit. Avoid using such
tapes or remove such labels from the cassette before attempting use.
• The music search and repeat functions may not work properly with the following
kinds of recorded tapes because the gap between songs cannot be found correctly.
* A tape with a gap of 4 seconds or less between songs.
* A tape containing dialog, etc., with pauses lasting for 4 seconds or longer.
* A tape with an extremely quiet passage in the music lasting for 4 seconds or
longer.
$ERXW&DVVHWWH7DSHV
• Do not use tapes longer than C-90 type (90 min.) cassettes. Longer tapes can
interfere with tape transport.
• Storing cassettes in areas directly exposed to sunlight or high temperatures can
distort them and subsequently interfere with tape transport.
NOT R
ED
MEND
EC O M
• Store unused tapes in a tape case where there is no danger of them becoming loose
or being exposed to dust.
&OHDQLQJWKH+HDG
If the head becomes dirty, the sound quality will deteriorate and there will be sound
dropouts and other imperfections in performance. In this case, the head must be
cleaned.
6SHFLILFDWLRQV
*HQHUDO
&DVVHWWHSOD\HU
Power source ..... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system .................................. Negative type
Max. current consumption ................................... 8.5 A
Dimensions
(mounting size) ... 178 (W) x 50 (H) x 155 (D) mm
(front face) ............. 188 (W) x 58 (H) x 19 (D) mm
Weight
1.2 kg
Tape ................. Compact cassette tape (C-30 – C-90)
Tape speed ............................................... 4.8 cm/sec.
Fast forward/rewinding time
..................................... Approx. 100 sec. for C-60
Wow & flutter ....................................... 0.09% (WRMS)
Frequency response .............. 30 – 16,000 Hz (±3 dB)
Stereo separation ............................................... 45 dB
Signal-to-noise ratio ................. 61 dB (IEC-A network)
$PSOLILHU
Maximum power output
(KEH-P5010R)........................................ 50 W x 4
(KEH-P4013R, KEH-P4010R, KEH-P4010RB)
................................................................ 45 W x 4
Continuous power output
(KEH-P5010R)........................................ 25 W x 4
(KEH-P4013R, KEH-P4010R, KEH-P4010RB)
................................................................ 25 W x 4
(DIN45324, +B = 14.4 V)
Load impedance ..................... 4 $ (4 – 8 $ allowable)
Preout maximum output
level/output impedance........................ 2.2 V /1 k$
Equalizer (3 band equalizer)
(Low) ................................................Level: ±12 dB
(Mid) ................................................Level: ±12 dB
(High) ...............................................Level: ±12 dB
Loudness contour
(Low) ............... +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ............. +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ............. +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
)0WXQHU
Frequency range ................................ 87.5 – 108 MHz
Usable sensitivity ................................................. 9 dBf
(0.8 µV/75 $, mono, S/N: 30 dB)
50 dB quieting sensitivity ................................... 15 dBf
(1.5 µV/75 $, mono)
Signal-to-noise ratio ................. 70 dB (IEC-A network)
Distortion .................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response .............. 30 – 15,000 Hz (±3 dB)
Stereo separation .................. 40 dB (at 65 dBf, 1 kHz)
0:WXQHU
Frequency range ................... 531 – 1,602 kHz (9 kHz)
Usable sensitivity .......................... 18 µV (S/N: 20 dB)
Selectivity ............................................. 50 dB (±9 kHz)
/:WXQHU
Frequency range .................................. 153 – 281 kHz
Usable sensitivity .......................... 30 µV (S/N: 20 dB)
Selectivity ............................................. 50 dB (±9 kHz)
&DVVHWWHSOD\HU
Tape ................. Compact cassette tape (C-30 – C-90)
Tape speed ............................................... 4.8 cm/sec.
Fast forward/rewinding time
..................................... Approx. 100 sec. for C-60
Wow & flutter ....................................... 0.09% (WRMS)
Frequency response .............. 30 – 16,000 Hz (±3 dB)
Stereo separation .............................................. 45 dB
Signal-to-noise ratio ................. 61 dB (IEC-A network)
• Specifications and the design are subject to
possible modification without notice due to
improvements.
(1*/,6+
1RWH
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1760, Long Beach, California 90801, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE N.V.
Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: (905) 479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
San Lorenzo Num 1009 3er piso Desp. 302
Col. Del Valle, Mexico D.F. C.P. 03100
TEL: 5-688-52-90
Published by Pioneer Corporation.
Copyright 2000 by Pioneer Corporation.
All rights reserved.
‹
Printed in Belgium
MAN-KEH-P5010R-GB/B
MAN-KEH-P5010R-GB_B.fm Page 20 Friday, October 6, 2000 2:22 PM