HP ProLiant MicroServer Generation 8 (Gen8)

QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Overview
HP ProLiant MicroServer Gen8 is a small, quiet, and stylishly designed server that is ideal for micro and small businesses
looking to build their first IT server environment. With a form factor that is easy to use and service, HP MicroServer Gen8
helps businesses get to a server that provides better and secured access to data, more efficiency in operations, while driving
down their operating expenses.
Front View:
1.
USB 2.0 connector
2.
USB 2.0 connector
3.
DVD-RW (optional)
4.
Power On/Standby button and system power LED
button
5.
NIC status LED
6.
Hard Drive status LED
7.
Intel® Processor
8.
2 DIMM slots: DDR3 Unbuffered (UDIMM) memory
9.
Health LED
10. Hard Drive Bays
11. Front bezel
Rear View:
1. NIC 2 connector
2. NIC 1 connector / Shared iLO connector
3. Power cord connector
4. PCIe 2.0 x16 slot
5.
6.
7.
8.
iLO 4 connector
Video connector
USB 3.0 connectors
USB 2.0 connectors
What's New
VMware support for new Intel Xeon models
Front Bezel Faceplate Kit allows you to customize your MicroServer
RDX support for disk based data protection
PS1810-24G switch for larger office environments
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 1
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
Processor
Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
NOTE: Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to 1333MHz DDR3
memory speed.
Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
NOTE: Intel® Xeon® E3-1220Lv2 supports up to 1600MHz DDR3 memory speed.
Cache Memory
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium and Xeon processors.
2MB (1 x 2MB) L3 Cache
NOTE: For Dual-core Celeron processor.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
Chipset
Intel® C204 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
On System
Management
Processor
HP iLO (Firmware: HP iLO 4)
Memory Protection
ECC
Memory
Type
Network Controller
HP Ethernet 1Gb 2-port 332i Adapter
Expansion Slots
Expansion
Technology
Bus
Connector
Form Factor
Notes
Slot #
Width*
Width
1
PCIe 2.0
x16
x16
Low Profile
NOTE: * Indicates the number of physical electrical lanes running to a PCI-e connector.
NOTE: For more information, visit: http://www.hp.com/go/ilo.
HP SmartMemory
DDR3 Unbuffered (UDIMM)
DIMM Slots Available
2
Standard
2GB (1 x 2GB) PC3-12800E DDR3 UDIMM
Maximum
16GB (2 x 8GB) PC3-12800E DDR3 UDIMM
NOTE: HP memory from previous generation servers are not fully compatible with the HP
ProLiant MicroServer Gen8.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 2
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to
continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are discovered
during this early phase of hardware initialization, suitable messages are now displayed on the
connected monitor. Additionally, these configuration or hardware errors are logged to the
Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu.
Storage Controller
HP Dynamic Smart Array B120i Controller
NOTE: HDD bays 1 and 2 support 6.0Gb/s SATA. HDD bays 3 and 4 support 3.0Gb/s SATA.
NOTE: Supports RAID 0/1/10 only. No FBWC support. For FBWC, a standup Smart Array
Controller card must be configured.
NOTE: For more information about the controller and its features, see the HP Dynamic Smart
Array RAID Controller User Guide on the HP website:
(http://www.hp.com/support/DSA_RAID_UG_en).
NOTE: To configure arrays, see the Configuring Arrays on HP Smart Array Controllers
Reference Guide on the HP website (http://www.hp.com/support/CASAC_RG_en).
NOTE: For general information about HP Smart Array B120i SATA RAID Controller, please go
to: http://h18004.www1.hp.com/products/servers/proliantstorage/
arraycontrollers/dynamicsmartarray/index.html
Internal Storage
Devices
Optical Drive
Hard Drives
Maximum Internal
Storage
Non-Hot Plug SATA
Optional: SATA DVD-RW drive
None ship standard
12TB (4 x 3TB) 3.5" SATA
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 3
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
Interfaces
Video
HP iLO Remote
Management Network
Port
Micro SD slot
USB 2.0 Ports
USB 3.0 Ports
Network RJ-45
(Ethernet)
Industry Standard
Compliance
1 Rear standard video
1Gb Dedicated (default iLO4 configuration)
1 Internal
NOTE: The MicroSD slot is not a hot-pluggable device. Customers
should not attempt to plug a MicroSD card into the MicroSD slot while
the server is powered.
5 total (2 front, 2 rear, 1 internal)
2 total (2 rear)
NOTE: Functional after OS boot.
2 (Port 1 shared for HP iLO4 as optional configuration)
ACPI V2.0b Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
USB 2.0
USB 3.0
SATA Gen 2
SATA Gen 3
Server Power Cords
The MicroServer models ship standard with a 6' country specific NEMA power cord. If customers
require an alternative local power cord, they can check the power cord matrix for the appropriate
country specific sku. Please see the following power cord matrix:
http://www.hp.com/go/powercordmatrix.
Power Specifications To review typical system power ratings use the HP Power Advisor which is available via the
online tool located at URL: www.hp.com/go/proliant-energy-efficient or
www.hp.com/go/hppoweradvisor.
NOTE: See Technical Specifications section at end of QuickSpec for Power Specifications.
Power Supply
One (1) 150 Watts Non-Hot Plug, Non redundant Power Supply (AMS, APJ and PRC models)
One (1) 200 Watts Non-Hot Plug, Non redundant Power Supply (EMEA models)
System Fans
One (1) - Non-redundant system fan shipped standard
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 4
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/support/MicroServerGen8
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
Ultra Micro Tower
On System
Management
HP iLO Management
Engine
HP iLO Management Engine is a comprehensive set of embedded
management features supporting the complete lifecycle of the server,
from initial deployment, through ongoing management, to service
alerting and remote support. HP iLO Management Engine comes
standard on all HP ProLiant Gen8 servers. The HP iLO Management
Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management
processor is the core foundation for the HP iLO Management
Engine
HP Agentless Management: Provides built in server health
monitoring and alerting capability without OS agents, that starts
working the moment a power cord and an Ethernet cable are
connected.
HP Active Health System: Always on, continuous monitoring for
increased stability and shorter downtimes; 100% configuration
history; Health and service alerts and easy export and upload to
Service and Support.
HP Intelligent Provisioning: Lets customers provision and
configure a single server without any separate media. No more
SmartStart CDs or Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server
boot process (also known as power on self test or
POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp to get firmware and software
updates.
HP iLO Mobile App: Enables the ability to access, deploy, and
manage your server anytime from anywhere from select
smartphones and mobile devices. For additional information
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 5
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
please visit: www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper
HP Insight
Management
HP Service Pack for
ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will be
updated at a predictable cadence, typically coinciding with new HP
server hardware launches. By enabling all firmware to be updated
online and integrating firmware and system software updates in one
operation HP SUM and the SPP offer faster updates of individual
servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact
that HP provides 12 months of support on each Service Pack for
ProLiant.
The user experience around HP SUM and the SPP has been improved
in several ways, starting with the web download. A single web page
provides access to a single download containing both the latest version
of HP SUM version 5 and the latest SPP. Optional smaller subsets with
only specific types of servers or specific operating systems are offered
to save on download time. The HP SUM application has been rewritten to provide a more straightforward, intuitive user interface that
guides the user through the steps of discovery, analyses and update,
providing comprehensive information on available updates, criticality
and interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which can
be easily updated from hp.com, HP SUM provides the tools to optimize
stability and consistency throughout the company. While HP SUM and
the SPP will recommend the combinations of firmware and system
software that HP has found to be the best practice, the application
gives customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both
within the server as well as in interaction with the BladeSystem
enclosure components (Onboard Administrator and Virtual Connect).
This testing ensures the highest quality as well as providing the input
for HP SUM to deploy updates taking into account all
interdependencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5) can
be downloaded from www.hp.com/go/spp/download. More information
can be found: www.hp.com/go/spp and http://www.hp.com/go/hpsum
Security
Setup password
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 6
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is
available for one year from date of purchase. Support for software and initial setup is available for
90 days from date of purchase. Enhancements to warranty services are available through HP
Care Pack services or customized service agreements. Hard drives have either a one year or
three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1 year Next Day Parts replacement, 0-Years Labor, 0-Years
Onsite support. Additional information regarding worldwide limited warranty and technical support
is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 7
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Optional Features
HP Insight
HP Insight Control
management software
HP iLO Essentials
HP iLO Advanced
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console. HP
Insight Control also supports Location and Power Discovery Services
to automate many configuration, asset tracking, and power
management tasks to speed implementation and prevent downtime.
For more information, see http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, see: http://www.hp.com/services/insight.
HP iLO Essentials license ideal for small and medium business
customers. The specially created HP iLO Essentials (a subset of iLO
Advanced functionality) saves SMB customers time and money, by
ease of remote server set up through the interactive virtual media,
lowering operational costs with remote access via the Integrated
Remote Console, and faster time to resolution with email-based
proactive notifications. With this newly designed HP iLO Essentials
license SMB customers now have the option of a server management
package solely design and priced just right for their IT environments.
HP iLO Essentials is available on all HP ProLiant Gen8 e-series
making this an ideal solution for small business owners. For more
information, see: http://www.hp.com/go/iLO/essentials
HP Integrated Lights-Out Advanced License a product option,
providing smart remote server management without compromise. iLO
Advanced unlocks the full set of remote administration functionality for
all HP ProLiant servers by activating the full Virtual Keyboard Video
and Mouse remote console, multi-user collaboration, console record
and replay, GUI-based and scripted virtual media and virtual folders,
and enhanced security and power management functionality. For more
information, see: http://www.hp.com/go/iloadvanced
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to
product and HP support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status
from anywhere and at any time. www.hp.com/go/insightonline
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
HP Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with
initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration
help, or use in your existing ordering processes. If you require "custom" rack configuration or
configuration for products not available in SCE, please contact HP's Customer Business Center or
an Authorized Partner for assistance. http://www.hp.com/products/configurator
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 8
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers
Capitalizing on HP ProLiant server capabilities requires a service partner who understands your
increasingly complex business technology environment. That's why it makes sense to team up
with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack services offer complete care and support expertise with committed response
choices designed to meet your IT and business needs.
HP Foundation Care services offer scalable reactive support-packages for HP industrystandard servers and software. You can choose the type and level of service that is most
suitable for your IT and business needs.
Optimized Care
Supports maintaining servers at optimum performance availability
HP Foundation Care 24x7 Service
HP Foundation Care 24x7 connects you to HP 24 hours a day, seven days a week for assistance
on resolving issues - hardware onsite response within four hours and software call back within
two hours after opening your case. Make HP your first call for hardware or software questions;
Collaborative Support is included in all Foundation Care Services for this product and provides
troubleshooting assistance on software such as Microsoft Server, Red Hat Linux, VMware and
more. Three years' coverage recommended with HP Care Pack Service.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
Standard Care
Supports maintaining high level of server availability
HP Foundation Care Next Business Day Service
HP Foundation Care Next Business Day connects you to HP during business hours for
assistance on resolving issues - features next business day hardware onsite response and
software call back within two hours after opening your case. Make HP your first call for hardware
or software questions; Collaborative Support is included in all Foundation Care Services for this
product and provides troubleshooting assistance on software such as Microsoft Server, Red Hat
Linux, VMware and more. Three years' coverage recommended with HP Care Pack Service.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 9
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Service and Support
Related Services
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You
can buy Provides a flexible way to purchase HP best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase your hardware and
then use the credits over the next 12 months.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
Insight Online/Insight HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and
Remote Support
problem resolution. This comes at no additional cost with your HP solution*. Learn more about
Insight Remote Support http://www.hp.com/go/insightremotesupport and Insight Online
http://www.hp.com/go/insightonline
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP
business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App** allows you to resolve issues yourself or quickly connect to an
agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP
warranty, HP Care Pack or HP contractual support agreement.
** HP Support Center Mobile App is subject to local availability
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by HP due to malfunction.
For more information To learn more on HP ProLiant servers, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 10
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Pre-configured Models
Entry Model
HP ProLiant
MicroServer Gen8
G1610T 1P 2GB-U
B120i NHP SATA
Server
712317-xx1
Processor
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI Slots
Power Supply
Fans
Management
Operating System
Form Factor
Warranty
(1) Intel® Celeron® G1610T (2.3GHz/2-core/2MB/35W) Processor
2MB (1 x 2MB) L3 cache
2GB (1 x 2GB) PC3-12800E DDR3 UDIMM
NOTE: Total of 2 DIMM slots.
HP Ethernet 1Gb 2-port 332i Adapter
HP Dynamic Smart Array B120i Controller
None ship standard
4 LFF NHP SATA HDD cage; includes 4 LFF hard drive carriers
None ship standard
1 standard (1-Low Profile) PCIe 2.0
150W Non-Hot Plug, Non-Redundant Power Supply (all models except
EMEA)
200W Non-Hot Plug, Non-Redundant Power Supply (EMEA only)
One (1) Non-redundant system fan ships standard
HP iLO Management Engine
Optional: iLO Essentials; iLO Advanced
None
Ultra Micro Tower
Server Warranty includes 1-Year Parts, 0-Year Labor, 0-Year Onsite
support with next business day response
Base Model
HP ProLiant
MicroServer Gen8
G2020T 1P 2GB-U
B120i NHP SATA
Server
712318-xx1
Processor
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Operating System
Form Factor
Warranty
(1) Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
3MB (1 x 3MB) L3 cache
2GB (1 x 2GB) PC3-12800E DDR3 UDIMM
NOTE: Total of 2 DIMM slots.
HP Ethernet 1Gb 2-port 332i Adapter
HP Dynamic Smart Array B120i Controller
None ship standard
4 LFF NHP SATA HDD cage; includes 4 LFF hard drive carriers
None ship standard
1 standard (1-Low Profile) PCIe 2.0
150W Non-Hot Plug, Non-Redundant Power Supply (all models except
EMEA)
200W Non-Hot Plug, Non-Redundant Power Supply (EMEA only)
One (1) Non-redundant system fan ships standard
HP iLO Management Engine
Optional: iLO Essentials; iLO Advanced
None
Ultra Micro Tower
Server Warranty includes 1-Year Parts, 0-Year Labor, 0-Year Onsite
support with next business day response
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 11
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Pre-configured Models
NOTE: Server model PN (F9A40A) available in EMEA only.
HP ProLiant
Processor
(1) Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
MicroServer Gen8 E3- Cache Memory
3MB (1 x 3MB) L3 cache
1220Lv2 1P 8GB-U
Memory
8GB (1 x 8GB) PC3L-10600E DDR3 UDIMM
B120i NHP SATA 200W
NOTE: Total of 2 DIMM slots.
PS Server
Network Controller
HP Ethernet 1Gb 2-port 332i Adapter
F9A40A
Storage Controller
HP Dynamic Smart Array B120i Controller
Hard Drive
None ship standard
Internal Storage
4 LFF NHP SATA HDD cage; includes 4 LFF hard drive carriers
Optical Drive Bay
None ship standard
PCI-Express Slots
1 standard (1-Low Profile) PCIe 2.0
Power Supply
200W Non-Hot Plug, Non-Redundant Power Supply
Fans
One (1) Non-redundant system fan ships standard
Management
HP iLO Management Engine
Optional: iLO Essentials; iLO Advanced
Operating System
None
Form Factor
Ultra Micro Tower
Warranty
Server Warranty includes 1-Year Parts, 0-Year Labor, 0-Year Onsite
support with next business day response
NOTE: Server model PN (G0M45A) available in APJ only.
HP ProLiant
Processor
(1) Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
MicroServer Gen8
3MB (1 x 3MB) L3 cache
Special Server
Cache Memory
3MB (1 x 3MB) L3 cache
G0M45A
Memory
4GB (1 x 4GB) PC3-12800E DDR3 UDIMM
NOTE: Total of 2 DIMM slots.
Network Controller
HP Ethernet 1Gb 2-port 332i Adapter
Storage Controller
HP Dynamic Smart Array B120i Controller
Hard Drive
None ship standard
Internal Storage
4 LFF NHP SATA HDD cage; includes 4 LFF hard drive carriers
Optical Drive Bay
9.5mm DVD-RW included
PCI-Express Slots
1 standard (1-Low Profile) PCIe 2.0
Power Supply
150W Non-Hot Plug, Non-Redundant Power Supply
Fans
One (1) Non-redundant system fan ships standard
Management
HP iLO Management Engine
Optional: iLO Essentials; iLO Advanced
Operating System
None
Form Factor
Ultra Micro Tower
Warranty
Server Warranty includes 1-Year Parts, 0-Year Labor, 0-Year Onsite
support with next business day response
Country Code Key
xx = 00
xx = 20
xx = 29
xx = 37
xx = 42
xx = AA
U.S.
Brazil
Japan
APD
Europe
PRC
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 12
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Core Options
HP Unique Options
HP MicroServer Gen8 Front Bezel Faceplate Kit
NOTE: This kit includes all three Front Bezel Faceplate colors (Blue, Red and
Black).
HP Memory
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
722320-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the
see the "Memory" section later in this document and the Online Memory
Configuration Tool for details at www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory.
HP Optical Drives
HP 9.5mm SATA DVD-RW JackBlack Optical Drive
652241-B21
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
6G SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr
Warranty Hard Drive
628065-B21
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
659339-B21
659337-B21
659341-B21
Page 13
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Core Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
HP Networking
HP NC112T PCI Express Gigabit Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
HP Networking
Switches
HP PS1810-8G Switch
HP PS1810-24G Switch
NOTE: HP PS1810 Series Switches have been custom designed to work with
the HP ProLiant MicroServer Gen8. These are layer 2 web-managed gigabit
switches with two offerings - 8 port and 24 port models. PS1810 Switches have
built-in technology that will enable automatic discovery of ProLiant Gen8
Servers. In addition the 8 port switch had a unique chassis design that enables
physical stacking on the MicroServer.
503746-B21
J9833A
J9834A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/14586_div/14586_div.html
(Worldwide)
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 14
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Additional Options
HP Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates
Electronic License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
Electronic License
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support and Update Service.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html.
HP Integrated Lights-Out (iLO)
HP Integrated Lights-Out (iLO) Advanced for ProLiant
HP Integrated Lights-Out Essentials including 1yr 24x7 Technical Support and
Updates E-LTU
HP Integrated Lights-Out Essentials including 3yr 24x7 Technical Support and
Updates E-LTU
HP iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
NOTE: For additional license options please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_div/14276_div.html
NOTE: For more information, visit: http://www.hp.com/go/ilo.
HP Security
HP MicroServer Gen8 Front Bezel Faceplate Kit
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These artifacts
can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature available
in Windows Server® 2008. BitLocker leverages the enhanced security
capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works
with BitLocker to help protect user data and to ensure that a server running
Windows Server 2008 has not been tampered with while the system was
offline. For more information about TPM, including a white paper, go to:
www.hp.com/go/TPM.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
C6N27A
C6N28ABE
BD883A
C6N31A
C6N36ABE
E6U62ABE
E6U61ABE
E6U64ABE
E6U59ABE
722320-B21
488069-B21
Page 15
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Additional Options
HP Storage Controllers SAS Controllers
Smart Array P222 Controller
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
NOTE: HP Smart Array P22/512 FBWC qualified for RAID support only for HP
ProLiant MicroServer Gen8.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14227_div/14227_div.html
(Smart Array P222 Controller)
HP Disk Backup
HP Uninterruptible
Power Systems
NOTE: For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx
HP RDX Removable Disk Backup Systems USB
HP RDX320 USB3.0 External Disk Backup System
HP RDX500 USB3.0 External Disk Backup System
HP RDX1000 USB3.0 External Disk Backup System
HP Tower - UPS
HP T750 G2 UPS Models
HP T750 G2 750VA NA Tower Uninterruptible Power System
HP T750 G2 750VA INTL Tower Uninterruptible Power System
HP T750J JP Uninterruptible Power System
HP T1000 G3 UPS Models
HP T1000 G3 1000VA NA Tower Uninterruptible Power System
HP T1000 G3 1000VA INTL Tower Uninterruptible Power System
HP T1000J JP Uninterruptible Power System
HP T1500 G3 UPS Models
HP T1500 G3 1400VA NA Tower Uninterruptible Power System
HP T1500 G3 1400VA INTL Tower Uninterruptible Power System
HP T1500J JP Uninterruptible Power System
NOTE: For additional information please go to:
http://www.hp.com/go/rackandpower (Worldwide)
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/13160_div/13160_div.html
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
631667-B21
B7B63A
B7B66A
B7B69A
AF446A
AF447A
AF456A
AF448A
AF449A
AF457A
AF450A
AF451A
AF458A
Page 16
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Additional Options
HP Rack Options
HP USB Keyboard and Mouse
HP USB BFR with PVC Free US Keyboard/Mouse Kit
HP USB BFR with PVC Free UK Keyboard/Mouse Kit
HP USB BFR with PVC Free FR Keyboard/Mouse Kit
HP USB BFR with PVC Free ES Keyboard/Mouse Kit
HP USB BFR with PVC Free DE Keyboard/Mouse Kit
HP USB BFR with PVC Free JP Keyboard/Mouse Kit
HP USB BFR with PVC Free IT Keyboard/Mouse Kit
HP USB BFR with PVC Free CN Keyboard/Mouse Kit
HP USB BFR with PVC Free AE Keyboard/Mouse Kit
HP USB BFR with PVC Free RU Keyboard/Mouse Kit
HP USB BFR with PVC Free SE Keyboard/Mouse Kit
HP USB BFR with PVC Free CH Keyboard/Mouse Kit
HP USB BFR with PVC Free PT Keyboard/Mouse Kit
HP USB BFR with PVC Free TR Keyboard/Mouse Kit
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit
HP USB BFR with PVC Free FI Keyboard/Mouse Kit
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free IN Keyboard/Mouse Kit
HP USB BFR with PVC Free KR Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13972_div/13972_div.html
(Worldwide)
HP USB and SD
Options
HP Flash Media Kits for USB Drives
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment and other HP value-add
software. HP recommends this industry standard USB flash device for use with
VMware ESXi. USB device must be installed in the internal slot of the ProLiant
server for use with VMware ESXi. Refer to HP VMware Getting Started Guide
for installation instructions.
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
NOTE: Blank SD media device is supported for use with VMware. SD media
must be installed in the internal slot of the ProLiant server. Learn more at:
http://www.hp.com/go/proliantvirtualization.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
631341-B21
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
672097-103
672097-113
672097-133
672097-143
672097-223
672097-353
672097-373
672097-B33
672097-D63
672097-KD3
737953-B21
726116-B21
700139-B21
Page 17
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Additional Options
HP Care Pack Services HP 3 year Next business day ProLiant MicroServer Hardware Support
HP 3 year 4 hour 13x5 ProLiant MicroServer Hardware Support
HP 3 year 4 hour 24x7 ProLiant MicroServer Hardware Support
HP Install ProLiant MicroServer Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
UR482E
UR483E
UR484E
UR508E
Page 18
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Memory
HP ProLiant Micro Server Generation 8
Standard Memory
2GB (1x2GB) PC3-12800E DDR3 UDIMM Memory kit installed
Maximum Memory
16GB of maximum memory is available with the installation of 2 x 8 GB UDIMM Memory kits.
Memory
Standard
Optional
Optional
Maximum
Slot
2 GB
4 GB
4 GB
8 GB
16 GB
1A
2 GB
2 GB
4 GB
4 GB
8 GB
2B
Empty
2 GB
Empty
4 GB
8 GB
Following are memory options available from HP:
HP Memory
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz
and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration
Tool for details at www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section
later in this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory. Low voltage memory operates at
standard voltage in the MicroServer Gen8.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
Page 19
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Storage
A
Optical Drive Bay
1, 2, 3, Four (4) Non-Hot Plug Drive Bays
4
Drive Support
Removable Media
Quantity
Supported
1
DVD-RW Drive
Position
Supported
A
Controller
Integrated SATA
Maximum Storage Capacity
Internal
SATA
12.0TB (4 x 3TB)
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 20
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
System Unit
Dimensions (H x W x D) 9.15 x 9.06 x 9.65 in (23.24x 23 x 24.5 cm)
(with feet)
Weight (approximate)
Maximum
21.60 lb (9.8 kg)
(all hard drives, power
supply and processor
installed)
Minimum
15.13 lb (6.8 kg)
(one hard drive, power
supply, and processor
installed)
Input Requirements
Rated Line Voltage
100 -- 127 VAC,
(per power supply)
200 - 240 VAC
Rated Input Current
3.5 A (at 110 VAC),
2 A (at 200 VAC)
Rated Input Frequency 50 to 60 Hz
Rated Input Power
For 150W Power Supply
192 W (at 100 VAC),
185 W (at 200 VAC)
For 200W Power Supply
243 W (at 100 VAC),
237 W (at 200 VAC)
BTU Rating
Maximum
For 150 W Power Supply
682 BTU/hr (at 100 VAC),
665 BTU/hr (at 200 VAC)
For 200 W Power Supply
838.86 BTU/hr (at 100 VAC),
825.22 BTU/hr (at 200 VAC)
Power Specifications To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
http://www.hp.com/go/hppoweradvisor
Power Supply Output Rated Steady-State
For 150 W Power Supply
(per power supply)
Power
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
Maximum Peak Power For 150 W Power Supply
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
System Inlet
Operating
10° to 35°C (50° to 95°F) at sea level with an
Temperature
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 21
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
Non-operating
Relative Humidity
(non-condensing)
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/r (36°F/hr)
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Operating
Non-operating
Altitude
Operating
Non-operating
Acoustic Noise (Fully
Loaded)
Idle
150W PSU
200W PSU
Operating
150W PSU
200W PSU
Acoustic Noise
(Lightly Loaded)
Idle
150W PSU
200W PSU
Operating
150W PSU
Emissions
Classification (EMC)
LWAd
LpAm
3.9 BELS
21.0 dBA
LWAd
LpAm
3.4 BELS
18.0 dBA
LWAd
LpAm
LWAd
LpAm
3.9 BELS
21.0 dBA
3.5 BELS
18.0 dBA
LWAd
LpAm
LWAd
LpAm
3.4 BELS
18.0 dBA
3.3 BELS
18.0 dBA
LWAd
LpAm
LWAd
LpAm
3.5 BELS
18.0 dBA
200W PSU
3.4 BELS
18.0 dBA
FCC Rating
Class B
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 22
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
HP Dynamic Smart
Dimensions
Array B120i Controller Disk Drive Interface Transfer rate
SATA Connectors
Server Interface
SATA Speed
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
Embedded
Up to 6Gb/s SATA (Serial ATA)
5 internal connectors with non-hot-plug support
PCIe 2.0
x2 6Gb/s SATA physical links (compatible with 3Gb/s SATA )
None
NOTE: On SATA models with embedded RAID, setup instructions are
located in the MicroServer User Guide
64-bit, supporting greater than 4GB server memory space
No
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
HP Ethernet 1Gb 2Network Interface
port NC332i Adapter Compatibility
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Energy Efficient Ethernet (EEE) compliant with IEEE Std 802.3az (default is
disabled)
Data Transfer Method Single lane (x1), 100MHz PCI Express Reference Clock
Controller
BCM5720
Network Transfer
10Base-T (Half-Duplex)
10 Mb/s
Rate
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex) 2000Mb/s
Connector
RJ-45 connector
Cable Support
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft
(100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100 m)
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 23
QuickSpecs
HP ProLiant MicroServer Generation 8 (Gen8)
Technical Specifications
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
AMD, the AMD Arrow logo, AMD Opteron™, and combinations thereof, are trademarks of Advanced Micro Devices, Inc.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14565 Worldwide QuickSpecs — Version 14 — 7/18/2014
Page 24