HP ProLiant BL495c Generation 6 Server Blade - bechtle

QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Overview
HP ProLiant BL495c Generation 6 (G6) Server Blade
1. Access panel
5. Local I/O connector
2. Two (2) mezzanine I/O expansion slots
6. Sixteen (16) PC2-5300 Registered DIMM (DDR2-667) or
PC2-6400 Registered DIMM (DDR2-800) memory slots
3. Embedded dual port Flex-10 10GbE multifunction server 7. Internal USB connector
adapter
4. Up to two (2) AMD Opteron™ 2400 Series processors
What's New
Support for HP NC553m 10Gb 2-port FlexFabric Adapter
At A Glance
This document covers the HP ProLiant BL495c G6 server blade only. For more information on HP BladeSystem c-Class
Enclosure and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following
QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 1
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Overview
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL495c G6 Server Blade virtualization blade eliminates the performance bottlenecks of a virtual
machine host. Engineered with more memory and I/O than any other half-height blade server, this world's first
virtualization blade maximizes the number and performance of VMs that you can deploy per blade.
HP ProLiant BL495c G6 server blade includes:
Processor:
Up to two (2) Six-Core AMD Opteron™ 2400 series processors
Supports up to 2.6 GHz, 2.2 GHz HyperTransport™; 512 KB Level 2 cache memory per core; 6 MB Level 3
cache
Dual-Link AMD HyperTransport connection between processors for maximum performance
AMD Dual Dynamic Power Management™ for optimum performance and reduced power consumption
ServerWorks HT-1000 and HT-2100 chipsets
Memory:
Up to 128 GB of memory, supported by sixteen (16) slots of PC2-5300 Registered DIMMs at 667MHz or
64GB of memory, supported by sixteen (16) slots of PC2-6400 Registered DIMMs at 800MHz
Supporting memory interleaving (2:1)
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz with
six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per processor.
Storage Controller:
HP Embedded SATA Controller
NOTE: RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage
Controller options section below.
Internal Drive Support:
Up to two (2) non-hot plug SATA Solid State Drives (SSD)
With an attached SB40c Storage Blade, up to six (6) hot plug SFF Serial Attached SCSI (SAS) or SATA
Hard Drives (optional)
Network Controller:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn
more at: www.hp.com/go/virtualconnect.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine options for SAN connectivity
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on
Mellanox technology)
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
Form Factor:
HP ProLiant BL495c G6 server blade plugs into the BladeSystem c3000 and c7000 enclosures
Infrastructure Management:
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release
may also require other subsystem firmware upgrades. For information on the latest firmware versions,
please see the Blades Firmware Maintenance website at:
http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
HP Integrated Lights-Out 2 management processor for simplified server setup, health monitoring and
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 2
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Overview
recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time
and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through
a single, simple management console. Insight Control supports both Windows and Linux-based central
management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. This ultimately enables them to
dynamically keep pace with the organization's changing business requirements.
Operating Systems and Virtualization Software:
Supports Windows, RHEL, SLES, VMware ESX, Citrix XenServer
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL495c
G6 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL495c
G6 servers plugged horizontally.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000
enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Hard Drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3- year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 3
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information
- Factory Integrated Models" section.
Processor
Six-Core Processors
AMD Opteron™ processor Model 2435 (2.6 GHz, 6 MB L3 Cache, 75W ACP)
AMD Opteron processor Model 2427 (2.2 GHz, 6 MB L3 Cache, 75W ACP)
Low Power AMD Opteron processor Model 2425 HE (2.1 GHz, 6 MB L3 Cache, 55W ACP)
NOTE: Offered through Configure-To-Order process only. See Factory Integration Models
section for more details.
NOTE: AMD Opteron 2400 series processors are 64-bit, six-core, and support AMD
Virtualization™.
NOTE: Processor wattage references reflect Average CPU Power (ACP). For more information
on ACP visit: http://www.amd.com/powernow.
Upgradeability
Upgradeable to dual (2) processors
Cache Memory
512 KB Level 2 cache memory per core
6 MB Level 3 cache memory
Chipset
ServerWorks HT-1000 and HT-2100
Memory
Type
Network Controller
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet
module. Learn more at www.hp.com/go/virtualconnect.
NOTE: The iSCSI offload feature of the embedded multifunction adapter requires the HP
Accelerated iSCSI Pack. For more information, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.html
One (1) additional 10/100 server adapter dedicated to iLO 2 management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (One x8 and one x4 PCI Express)
Integrated
Manageability
HP Integrated Lights-Out 2 (iLO 2) management processor
Storage Controller
HP Embedded SATA Controller (for connecting to non-hot plug SATA SDD only)
NOTE: RAID functionality requires the use of an optional Smart Array mezzanine card. See the
Storage Controller options section below.
PC2-5300 DDR2 Registered DIMMs at 667 MHz
PC2-6400 DDR2 Registered DIMMs at 800MHz
Standard
4 GB (2 x 2 GB)
Maximum
128 GB (16 x 8 GB) at 533 MHz
NOTE: Memory must be installed in pairs.
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor,
667 MHz with six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per processor.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 4
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Standard Features
Maximum Internal
Storage
Non-Hot Plug SATA
128GB
(SATA) SSD
Hot Plug SFF SAS (with 1.8TB
optional SB40c Storage
Blade attached)
2 x 64GB SATA SSD
6 x 300GB Hot Plug SAS
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
Graphics Resolution
Supported
Resolution Color Depths 1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16,7M, 64k, 256, 16
640 x 480, 16,7M, 64k, 256, 16
Fibre Channel Support Two (2) optional dual-port Fibre Channel HBAs are supported by the HP ProLiant BL495c G6.
Each mezzanine circuit board connects directly to the server blade system board. These Fibre
Channel HBAs are available via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403621B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's
renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all
Emulex HBAs
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403619B21)
Uses common drivers which means that customers can standardize on one QLogic
driver whether they are using the QMH2462 or other HBAs powered by QLogic
Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
Compatible SAN
HP ProLiant BL495c G6 server blades are optimized for HP StorageWorks MSA, EVA, and XP
HP ProLiant BL495c G6 server blades are compatible with select 3rd party SANs (please see
blade storage page for more details:
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html)
HP Virtual Connect
HP Virtual Connect simplifies server connectivity to LANs and SANs, and reduces costs.
Unique HP Flex-10 technology makes maximum use of 10Gb Ethernet bandwidth by allowing
multiple ports within a single Industry Standard connection that can be dynamically tuned to
meet individual server requirements. HP Virtual Connect Enterprise Manager (VCEM) provides
a central console to administer connections and workloads for thousands of servers. For more
information on Virtual Connect Ethernet, Fibre Channel and management options see:
www.hp.com/go/virtualconnect
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 5
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Standard Features
HP Insight
HP Insight Foundation
management software
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address
changing business needs with tools that meet the challenges of
managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecycle. This provides the customer with higher levels
of operational efficiency and highly reliable systems:
www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management DVD
HP ProLiant Smart Update Firmware DVD
SmartStart version supported (minimum): SmartStart 8.1
http://www.hp.com/servers/smartstart
HP Integrated LightsOut (iLO)
HP Insight Control
NOTE: In an effort to support reducing our environmental impact, the
HP Insight Foundation Suite for ProLiant media will be available as a
selectable option for this server at time of order of a Factory
Integrated Model. This will allow customers to order the number of
media kits that best meet their needs and eliminate receiving
unnecessary duplicate media.
HP Integrated Lights-Out (iLO) simplifies server setup, health
monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location via
a web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control suites, and Insight Dynamics for ProLiant,
helping customers unleash the value of the ProLiant platform and
deliver the highest possible quality of IT service. For more
information, visit: www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central
management server: HP Insight Control for Linux, and HP Insight
Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information
about this service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for HP Insight Dynamics for ProLiant, a product option, is an integrated
ProLiant
command center that enables IT Staff personnel to continuously
analyze and optimize a converged infrastructure, while automating
and reducing the cost of common data center tasks by as much as 40
percent. As a powerfully integrated by design toolkit to accelerate
complex technology projects and simplify daily operations that
ultimately enable IT Staff personnel to dynamically keep pace with the
organizations changing business requirements. It enables them to
plan capacity and power continuously, balance across physical and
virtual resources, and ensure cost-effective high availability. It also
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 6
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Standard Features
enables IT organizations to provision infrastructure consistently and
automatically from pools of shared resources using a self-service
portal. Resources provisioned can range from a single virtual
machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery
for physical and virtual environments that works with HP
StorageWorks Continuous Access software for both the Enterprise
Virtual Array and the XP storage array allowing application
environments to be reactivated in minutes with the touch of a button
to a remote location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
HP Cluster
Management Utility
HP HPC Linux Value
Pack
Operating Systems
and Virtualization
Software
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red
Hat Enterprise Linux and Novell SLES, as well as Microsoft Windows
HPC Server. A Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used to manage large-scale Linux
ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPsupported specially priced software bundle for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the Platform LSF workload scheduler, the HP-MPI
parallelization library, the HP Unified Parallel C compiler and the HP
Shmem library, as well as the execution environments for the libraries
and compiler. HP HPC Linux Value Pack
Microsoft Windows Server
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware ESX
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server including,
how to purchase from HP, please visit our OS Support Site at: http://www.hp.com/go/supportos
and our driver download page http://www.hp.com/support/BL495cG6
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 7
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Standard Features
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Dual- and Quad-Port server adapter for redundant LAN connections
Redundant ROM on each server blade
Multiple mezzanine I/O expansion
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted
load balancing)
Industry Standard
Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
Microsoft® Logo certifications
USB 2.0 Support
Security
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers and storage products. Customers can choose how their factory solutions are
built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include
a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services on your specific server model please
contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please
contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 8
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Service and Support
Service and Support
HP Care Pack Services: Packaged server and storage services for increased uptime,
productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think
about what levels of support you may need. Our portfolio of service options reduce deployment
and management worries while helping you get the most out of your server and storage
investments. We take a holistic approach to your environment, bridging servers, blades,
storage, software and network infrastructures with our packaged HP Care Pack Services for
servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have
matured along with technology. Good news that can also create problems stemming from
depending on standard warranties designed to only protect against product defects and some
downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack
Services, helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties
cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite
sold separately, or combined with our Support Plus and Support Plus 24 services. The portfolio
also provides a combination of integrated proactive and reactive services, such as Proactive
24 Service and Critical Service. In addition with HP Proactive Select, you can acquire the
specific proactive constancy and technical services. HP Proactive Select menu offers a broad
set of service options that you can mix and match depending on your specific requirements.
Proactive service options include offers for server, storage, network, SAN device, software,
environment and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from
technology support to complex migrations to complete managed services. HP Factory Express
provides customization, integration and deployment services for turnkey solutions. HP
Education Services offer flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend innovative financing
and cost-effective asset management programs-from purchase to equipment retirement.
Learn more: www.hp.com/services/servers and www.hp.com/services/storage
NOTE: Care Pack Services availability may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using
HP order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
http://www.hp.com/go/lookuptool
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 9
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Service and Support
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6- or 24-hour
Provides your IT manager with a team of support specialists who will quickly begin
troubleshooting the system to help return the hardware to operating condition within 6 or 24
hours of the initial service request to the HP Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or twenty four hours. The
benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized representative who
will arrive on site any time and day of the year to begin hardware maintenance service within 4
hours of the service request being logged.
This service provides a trained HP service specialist to perform an installation that meets HP
quality standards, for:
Help improve or maintain system uptime
Convenient onsite support
Committed response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
Expedited installation, with all service prerequisites met before the installation is
performed
Installation in accordance with manufacturer's specifications, enhancing the
supportability of your HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during the onsite delivery of
this service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 10
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Service and Support
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced
operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness with an integrated
hardware and software support service that combines industry-leading reactive technical
assistance with proactive account services, giving your IT manage support from a team of
service specialists.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education
courses
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You
can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you
need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access
the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
business. You can have your systems remotely monitored for hardware failure using secure
technology that's been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 11
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Service and Support
Customer Technical
Training
In today's cost-conscious business environment, IT professionals, developers, consultants and
users face an interesting challenge: how to keep up with the latest technologies and expand
important skills while delivering profitable results on current projects. To help address this
challenge, HP offers innovative training solutions that help keep you up-to-date on
virtualization, server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support excellence by
customers, partners, industry organizations and publications around the world. Recent honors
and award reflect our services team's dedications, technical expertise, professionalism and
uncompromising commitment to customer satisfaction.
Additional Services
Information
To learn more on HP ProLiant servers, HP BladeSystem servers and HP StorageWorks
storage products, please contact your HP sales representative or HP Authorized Channel
Partner. Or visit: www.hp.com/services/proliant or www.hp.com/services/bladesystem or
http://www.hp.com/hps/storage
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 12
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Models
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
Six-Core Models
HP ProLiant BL495c
G6 2435 6C, 4G (1P)
539804-B21
HP ProLiant BL495c
G6 2427 6C, 4G (1P)
539807-B21
Processor(s)
One of the following
depending on model
Cache Memory
One of the following
depending on model
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
(1) AMD Opteron™ processor Model 2435 (2.6 GHz)
(1) AMD Opteron processor Model 2427 (2.2 GHz)
512 KB Level 2 cache memory per core
6 MB Level 3 cache memory
4 GB (2 x 2 GB) PC2-6400, Registered DDR2-800
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server
Adapter and one (1) additional 10/100 server adapter dedicated to
iLO 2 management
HP Embedded SATA Controller
No drives included; (2) Non-Hot Plug SSD internal drive bays
Up to 128 GB SATA SSD
None
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 13
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration
HP Models
HP ProLiant BL495c G6 Configure-to-order Server
Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and
one (1) additional 10/100 server adapter dedicated to iLO 2 management
HP Embedded SATA Controller
Two (2) non-hot plug internal SATA SSD drive bays
HP Integrated Lights-Out 2 (iLO 2) management processor
539810-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
HP Memory
For single processor configuration choose:
NOTE: If two (2) processors are desired, select one xxxxxx-L21 and one xxxxxxB21.
AMD Opteron™ 2435 2.60GHz Six Core 75 Watts BL495c G6 Factory
Integrated Processor Option Kit
AMD Opteron™ 2427 2.20GHz Six Core 75 Watts BL495c G6 Factory
Integrated Processor Option Kit
AMD Opteron™ 2425HE 2.10GHz Six Core 55 Watts BL495c G6 Factory
Integrated Processor Option Kit
HP 2GB (2x1GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 4GB (2x2GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank x4 PC2-6400 (DDR2-800) Registered Low Power
Memory Kit
HP 16GB (2x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
HP 64GB (8x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
NOTE: Must be installed in pairs.
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs
per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with
eight (8) DIMMs per processor.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
539805-L21
539808-L21
539812-L21
497763-B21
497765-B21
497767-B21
504351-B21
408855-B21
495605-B21
Page 14
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options and Additional Options" please see the options sections below. For additional options,
including server blade enclosures interconnect and mezzanine options and power subsystem options; please see the
following QuickSpecs:
HP BladeSystem c-Class Infrastructure QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 15
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
HP Ethernet
Gigabit Ethernet Mezzanines
Mezzanine Options
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class
416585-B21
BladeSystem
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class
406771-B21
BladeSystem
HP NC360m Dual Port 1GbE BL-c Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c Adapter
447883-B21
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
453246-B21
QLogic iSCSI Dual Port Adapter with Virtual Connect for c-Class BladeSystem
488074-B22
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000
Mbps, full duplex per port. For more information, see the "Network Controller"
segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 2-4 (HP BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of
server memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or
10000Mbps when not connected to a Flex-10 enabled module and will link
with all current 1Gb switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the
configuring of a FlexFabric Adapter to any of the supported protocols. For
example iSCSI to FCoE (Fibre Channel over Ethernet). Note that a HP Virtual
Connect profile takes precedence over the setting in this menu. Also, some
FlexFabric Adapters may require that network boot be enabled in order to
configure the protocol. If the protocol is configured without enabling network
boot with certain FlexFabric Adapters, the protocol may not take effect. Once
the protocol has taken effect on the first boot after configuring this option,
network boot may be disabled if desired.
HP NC522m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
467801-B21
HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
467799-B21
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
539857-B21
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
581204-B21
HP BLc NC552m Flex-10GbE Dual Port Adapter
610609-B21
HP NC553m 10Gb 2-port FlexFabric Adapter
613431-B21
HP Fibre Channel
Mezzanine Options
Fibre Channel Mezzanine Options
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class
BladeSystem
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
403621-B21
403619-B21
Page 16
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Core Options
HP Processors
HP Memory
HP Hard Drives
HP BL495c G6 AMD Opteron™ 2435 (2.60GHz/6-core/6MB/75W) Processor
Kit
HP BL495c G6 AMD Opteron™ 2427 (2.20GHz/6-core/6MB/75W) Processor
Kit
HP BL495c G6 AMD Opteron™ 2425HE (2.10GHz/6-core/6MB/55W)
Processor Kit
539805-B21
HP 2GB (2x1GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 4GB (2x2GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank x4 PC2-6400 (DDR2-800) Registered Low Power
Memory Kit
HP 16GB (2x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
HP 64GB (8x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
NOTE: Must be installed in pairs.
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs
per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with
eight (8) DIMMs per processor.
497763-B21
497765-B21
497767-B21
504351-B21
NOTE: Drives have either a one year or three year warranty; refer to the
specific drive QuickSpecs for details.
HP 32GB 1.5G SATA SFF (2.5-inch) Non-hot Plug Entry 3yr Warranty Solid
State Drive
HP 64GB 1.5G SATA SFF (2.5-inch) Non-hot Plug Entry 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_div/13121_div.html
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
539808-B21
539812-B21
408855-B21
495605-B21
461201-B21
461203-B21
Page 17
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative for additional information.
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
T9074BAE
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
452148-B22
Server License
HP Insight Software Media Kit
436222-B21
NOTE: Insight Software DVD media without licenses. Contains Insight Control,
Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem
enclosures, please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
TC213AAE
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
TC209A
HP Insight Control for Linux Media Kit
TC208A
NOTE: Media pack DVD contains HP Insight Control for Linux, HP Systems
Insight Manager, HP Insight Control power management, HP Insight Control
virtual machine management, and an integrated installer. Licenses must be
acquired separately.
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: http://www.hp.com/go/iclinux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and are available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out (iLO) Advanced for BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic
TA851AAE
License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
512488-B21
License
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 18
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Additional Options
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the HP Integrated Lights-Out 2 (iLO
2) QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server
License
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
High Performance
Clusters
HP Cluster Management Utility Compute Node License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP Cluster Management Utility Media and Management License
NOTE: Order a minimum of one license per cluster to purchase media
including software and documentation, which will be delivered to the
customer, and also licenses CMU management. No license key is delivered or
required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack One Processor License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP HPC Linux Value Pack Media
NOTE: This part number can be used to purchase media including software
and documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
T9082AAE
452151-B21
436284-B21
433257-B21
TC293A
TC294A
Page 19
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Additional Options
HP Storage
Controllers
Smart Array P700m Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
Smart Array P712m Controller
HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller
NOTE: Provides RAID support on internal non-hot plug SSDs.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/13296_div/13296_div.html
(Worldwide)
Optional Upgrade
HP 650 mAh P-series Low Profile Battery
NOTE: The HP 650 mAh P-Series battery option kit is required to enable
battery-backed write cache (BBWC) on the P712m.
HP Smart Array P-Series Low Profile Battery
NOTE: The Smart Array P-Series battery option kit is required to enable
battery-backed write cache (BBWC) on the P700m.
HP I/O Expansion
Options
HP StorageWorks 80GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 160GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 320GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html
HP InfiniBand
Mezzanine Options
HP 4X DDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
HP Ultrium Tape
Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium technology
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology
HP StorageWorks Ultrium 448c Tape Blade
NOTE: LTO-2 Ultrium tape technology
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
NOTE: Please visit the BladeSystem c-Class enclosure QuickSpecs for a
complete list of recommended data protection solutions for BladeSystem cClass enclosures:
http://h18004.www1.hp.com/products/blades/components/enclosures/cclass/index.html.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
508226-B21
507925-B21
484299-B21
575031-B21
452348-B21
AJ876A
AJ877A
AJ878A
448262-B21
AQ697A
AJ401A
440947-B21
Page 20
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Additional Options
HP StorageWorks
Storage Blades
HP StorageWorks LTO-5 SB3000c Tape Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
HP StorageWorks SB40c Storage Blade with HP LeftHand VSA bundle
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
BS580A
HP Expansion Blade
HP PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
HP USB and SD
Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP USB 04 Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment and other HP value-add
software like SmartStart. HP recommends this industry standard USB flash
device for use with VMware ESXi. USB device must be installed in the internal
slot of the ProLiant server for use with VMware ESXi. Refer to HP VMware
Getting Started Guide for installation instructions.
HP Care Pack Services NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class
server blades, cover the server blade and all HP branded hardware options
qualified for the server, purchased at the same time or afterwards, internal to the
server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
DC172B
DT528A#ABA
608447-B21
UK065E
UK066E
UK067E
Page 21
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
DIMM installation guidelines:
1.
2.
3.
4.
5.
6.
7.
All DIMMs must be PC2-5300 Registered DDR2 DIMMs (667 MHz) or PC2-6400 Registered DDR2 DIMMs (800 MHz).
Both DIMM slots in a memory bank must be populated.
Both DIMMs in a memory bank must be identical.
Processor 1 memory bank A must always be populated.
DIMM banks are active only when the corresponding processor socket is populated.
If installing only one bank on a processor, populate the bank physically farthest from the processor.
If mixing DIMM sizes on the same processor, the largest capacity DIMMs must be populated in the bank physically
farthest from the processor. The smallest capacity DIMMs must be populated in the bank physically nearest the
processor.
8. For optimal performance in most applications, populate the first memory bank for every populated processor socket.
9. The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz with six (6) DIMMs per
processor, and 533 MHz with eight (8) DIMMs per processor.
HP ProLiant BL495c G6 Server Blade
Standard Memory
4096 MB (2 x 2048 MB) of PC2-5300 or PC2-6400, Registered DDR2 ECC DIMMs.
Standard Memory Plus Optional Memory
Up to 118784 MB of PC2-5300 or 61440 MB of PC2-6400, Registered DDR2 ECC DIMMs. Memory is available with the
installation of optional PC2-5300 or PC2-6400, Registered DDR2 DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 131072 MB of PC2-5300 or 65536 MB of PC2-6400, Registered DDR2 ECC DIMMs. Memory is available with the
removal of standard memory and the installation of optional PC2-5300 or PC2-6400, Registered DDR2 DIMM memory
expansion kits.
1 Processor Configurations
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
Standard 4096 MB
2048 MB 2048 MB
Empty
Empty
Empty
Empty
Empty
Empty
Optional 53248 MB 8192 MB 8192 MB 8192 MB 8192 MB 8192 MB 8192 MB
2048 MB
2048 MB
Maximum 65536 MB 8192 MB 8192 MB 8192 MB 8192 MB 8192 MB 8192 MB
8192 MB
8192 MB
Memory
Memory
Memory
2 Processor Configuration, Total Memory = 60GB
Slot
1A
2A
3B
4B
5C
6C
4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
9E
10E
11F
12F
13G
14G
4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
7D
2048 MB
15H
4096 MB
8D
2048 MB
16H
4096 MB
2 Processor Configuration, Total Memory = 64GB
Slot
1A
2A
3B
4B
5C
6C
4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
9E
10E
11F
12F
13G
14G
4096 MB 4096 MB 4096 MB 4096 MB 4096 MB 4096 MB
7D
4096 MB
15H
4096 MB
8D
4096 MB
16H
4096 MB
2 Processor Configuration, Total Memory = 116GB
Slot
1A
2A
3B
4B
5C
6C
8192 MB 8192 MB 8192 MB 8192 MB 8192 MB 8192 MB
9E
10E
11F
12F
13G
14G
7D
2048MB
15H
8D
2048MB
16H
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 22
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Memory
8192 MB
Memory
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
2 Processor Configuration, Total Memory = 128GB
Slot
1A
2A
3B
4B
5C
6C
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
9E
10E
11F
12F
13G
14G
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
7D
8192MB
15H
8192MB
8D
8192MB
16H
8192MB
Following are memory options available from HP:
HP Memory
HP 2GB (2x1GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 4GB (2x2GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank x4 PC2-6400 (DDR2-800) Registered Low Power
Memory Kit
HP 16GB (2x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
HP 64GB (8x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
497763-B21
497765-B21
497767-B21
504351-B21
408855-B21
495605-B21
NOTE: Must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs
installed in the banks furthest away from each processor.
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs
per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with
eight (8) DIMMs per processor.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 23
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Storage
1-2
2 x SATA Solid State Drives (SSD)
SATA Non-Hot Plug Solid State Drives
NOTE: Hard Drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
Quantity
Position
Supported
Supported Controller
32GB 1.5G SATA SSD
2
1-2
HP Integrated SATA Controller
HP Smart Array P712m Controller
64GB 1.5G SATA SSD
2
1-2
HP Integrated SATA Controller
HP Smart Array P712m Controller
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 24
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
Maximum
14.20 lb (6.44 kg)
(all hard drives and
processors installed)
Minimum
10.75 lb (4.87 kg)
(one hard drive and
processor installed)
For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
To review typical system power ratings use the HP BladeSystem Power
Sizer which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Non-operating
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 25
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Technical Specifications
Embedded NC532i Dual Type
Port Flex-10 10GbE
Network Processor
Multifunction Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
HP Integrated LightsOut 2 (iLO 2)
integrated on system
board
Architecture
Integrated dual-port KR 10GbE
Broadcom 57711
x8 PCI Express 1.0
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate
with 1 Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC532i adapter transmits from the server at
only 20 Gbps (theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
4K Jumbo frames
Microsoft Windows Receive Side Scaling (RSS)
Optional accelerated iSCSI
32-bit PCI-based health and remote management ASIC
Processor
Upgradeability
Video Support
32-bit RISC processor core running at 66MHz
Option firmware upgradeable via Flash ROM
Utilizes the host server's embedded video chip - supports VGA/SVGA,
640 x 480 (256 to 16.7M colors), 800 x 600 (256 to 16.7M colors),
1024 x 768 (256 to 65K colors), 1280 x 1024 (256 colors)
Interfaces
One Ethernet network connection (10/100 Mb/s)
Memory
4-MB Flash ROM
16-MB SDRAM
Operating System
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Support
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition,
Enterprise Edition
Red Hat Enterprise Linux 5.4 (32bit and 64bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Linux Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client System Support Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Linux Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 26
QuickSpecs
HP ProLiant BL495c Generation 6 Server Blade
Technical Specifications
Client Browser Support Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line
Telnet, Secure Shell and serial port access
Support
Secure Socket Layer
Secure Shell version 2 (Password and certificate)
Security
Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
RC4 encryption of video
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
AMD is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13346 Worldwide QuickSpecs — Version 13 — 1.10.2011
Page 27