1
Industrial PoE Managed Switches / EN50155 Switches
IPES-5408S-X
(IP65)
8 10/100TX + 4 10/100/1000T X-coded L2+ 8 PoE at/af Industrial Managed Switch
w/ enhanced G.8032 Ring & PTP

EN50155/61373/45545-2 certified*; Compact size

IEEE802.3at/af up to 30W per port; PoE
management incl. detection and scheduling

Wide input range from 24V to 110V for
IEEE802.3at/af max.80W power budget

Galvanic isolation between input, PoE and output
as well as case(WV model)

Enhanced G.8032 ring protection < 20ms with auto
mode, enhanced mode, train mode and basic mode; Enhanced
G.8032 ring covers multicast packets; MSTP 16MSTI /RSTP

Support PTPv2 two-step <1us, environmental monitoring

Miss-wiring avoidance; Repowered auto ring restore (node failure protection)

IP65 housing; User friendly UI, including auto topology drawing; Complete CLI

Support LACP link aggregation, IGMP v3/router port, DHCP server & DHCP Option82 for
Port&VLAN based DHCP distribution, Mac based DHCP server, QoS by VLAN, SSH/SSL, HTTPS,
ACL, IPv6, SMS

N-key configurator** for upgrading, auto back / editable configuration restore without computer
OVERVIEW
Lantech IPES-5408S-X (IP65) is a high performance L2+
per port status. PoE detection can detect if the connected PD is
(Gigabit uplink) switch with 8 10/100TX(d-coded) + 4
hang up then restart the PD; PoE scheduling is to allow pre-set
10/100/1000T(x-coded) w/8 PoE 802.3af/at Injectors by M12
power feeding schedule upon routine time table. Per port PoE
provides L2 wire speed and advanced security function for
status can remotely On/Off the power and display information of
network aggregation deployment. It delivers ITU G.8032
voltage, current, watt and PoE temperature.
enhanced ring recovery less than 20ms including train coupling
ring , enhanced mode for easy configuration, comprehensive
Wide range input voltage from 24V to 110V
QoS, QoS by VLAN, advanced security including ACL L2/L3,
The Lantech IPES-5408S-X (IP65) series is designed with wide
SSH/SSL, Mac based DHCP server, DHCP Option 82, DHCP
range power dual input from 24V to 110VDC (WV model) at PoE
server, IGMPv1/v2/v3/router port, QinQ* (double tag VLAN)
budget max 80W. The IPES-5408S-X (IP65) also provides ±
which are important features required in train and large network.
2000V EFT and ±6000V ESD protection, which can reduce
It also supports Cisco Discovery Protocol (CDP) and LLDP for
unstable situation caused by power line and Ethernet.
Ciscoworks to detect the switch info and show on L2 map
topology.
Galvanic isolation, WV input/ 12V input, High PoE budget
The IPES-5408S-X (IP65/IP65) provides galvanic isolation
PTP IEEE1588 v2 two-step for 4 x GigaT ports
between DC input and PoE circuit for WV model from input
Lantech IPES-5408S-X (IP65) features hardware-based PTP
range 16.8V~137.5VDC.
IEEE1588 v2 function which can allow 4 10/100/1000T uplinks
from 9.5V~57VDC or single -48VDC
The 12V model accept dual DC input
to synchronize the network with precise accuracy (under 1μs).
Re-powered ring restoration, Miss-wiring alert, Loop
8x 802.3at/af ports w/advanced PoE management
protection
Lantech IPES-5408S-X (IP65) supports IEEE802.3at/af
The IPES-5408S-X (IP65) also embedded several features for
standard which can feed HI-power up to 30W at each PoE port
stronger and reliable network protection in an easy and intuitive
for big power consumption devices like PTZ IP camera, High
way. When the pre-set ring configuration failed or looped by
power wireless AP etc. The advanced PoE management
miss-wiring, Lantech IPES-5408S-X (IP65) is able to alert with
includes PoE detection and scheduling besides the regular PoE
the LED indicator. Repowered auto ring restore function (node
Datasheet Version 1.1
www.lantechcom.tw | info@lantechcom.tw
2
Industrial PoE Managed Switches / EN50155 Switches
failure protection) ensures the switches in a ring to survive after
The configuration file of Lantech IPES-5408S-X (IP65) can be
power breakout is back. The status can be shown in NMS when
exported in text file so that it can be edited and configured back
each switch is back. This feature prevents the broken ring and
to switch with ease for mass deployment. The optional N-key
keep ring alive without any re-configuration needed. Loop
configurator offers mass firmware auto upgrade, auto back up
protection is also available to prevent the generation of
/editable restoration by adjusting the DIP switch.
broadcast storm when a dumb switch is inserted in a closed
loop connection.
QoS by VLAN
QoS by VLAN can allow switch to prioritize packets by VLAN
Smart DHCP (Port based +DHCP option 82+DHCP option 82
tag regardless the devices acknowledge QoS or not in which
server) ; Mac based DHCP
greatly enhance the bandwidth management in a network.
DHCP option 82 and relay agent function (port&vlan based
DHCP distribution) can offer the same IP address on port base
Event log & message; 2DI + 2DO
or vlan base where there is need to replace the new device
In case of event alarm, the IPES-5408S-X (IP65) will
connecting to Lantech switches to avoid any network disruption.
immediately send an email & SMS text message to pre-defined
The built-in DHCP Option 82 server offers the convenience of
addresses as well as SNMP Traps out. It provides 2DI and 2DO
police setting on the switch. Mac based DHCP server function
while disconnection of the specific port was detected; DO will
assigns an IP address according to its MAC address to include
activate the signal LED to alarm. DI can integrate the sensors
dumb switches in DHCP network.
for events and DO will trigger the alarm while sending alert
information to IP network with email and traps.
Optional InstaConfig; Web GUI & CLI; RTC
Lantech InstaConfig software** provides easy configuration for
Environmental monitoring for inside switch info
mass deployment. The built-in watchdog design can
The built-in environmental monitoring can detect switch overall
automatically reboot the switch when cpu is found dead.
temperature, voltage, current and PoE total load where can
send the SNMP traps, email and SMS alert when abnormal.
The user friendly UI, innovative auto topology drawing and
topology demo makes IPES-5408S-X (IP65) much easier to get
EN50155, 45545-2, 50121-3-2, 61373 certified*
hands-on. The switch also equips the RTC (real time clock)
The IPES-5408S-X (IP65) is designed to meet with critical
which can keep track of time always. The complete CLI enables
network environment with IP65 aluminum enclosure and M12
professional engineer to configure setting by command line.
connectors for water proof. It passed serious tests under
extensive Industrial EMI and Safety standards. With EN45545-2
G.8032 <20ms recovery, Train Ring, MSTP, RSTP
Fire & Smoke and EN50155* certification, the IPES-5408S-X
Lantech IPES-5408S-X (IP65) features enhanced G.8032 ring
(IP65) is best for railway in train/track side, vehicle and mining
which can be self-healed in less than 20ms for single ring
applications. For more usage flexibilities, IPES-5408S-X (IP65)
topology protection covering Multicast packets. It also supports
supports wide operating temperature from -40°C to 75°C.
various ring topologies that covers double ring, multi-chain
(under enhanced ring), train ring, basic ring by easy setup than
Optional GigaT bypass
others. The innovative auto-Ring configurator (auto mode) can
The optional bypass relay is set to bypass the switch to the next
calculate owner and neighbor in one step. It supports MSTP
one in 4ms when power is off in order to protect the network
that allows RSTP over Vlan for redundant links with 16 MSTI.
from crashing. Lantech bypass caters to remain in bypass mode
The ITU G.8032 Ring and RSTP can be co-existed in the same
until the switch is completely booting up when power is back to
switch with different ports for the most flexible protection.
avoid another network lost. The bypass is also activated when
detecting the CPU watchdog is ON.
Optional N key auto backup; Exported text file
FEATURES & BENEFITS

8 10/100TX(d-coded) + 4 10/100/1000T(x-coded) w/8
PoE 802.3af/at Injectors Industrial Managed IP65
10/100/1000T

M12 Switch (Total 12 Ports Switch)



auto/editable configuration back up and restoration
EN45545-2 Fire & Smoke, EN50155* and EN61373

Back-plane (Switching Fabric): 9.6Gbps
shock/vibration certified

16K MAC address table
IEEE802.3at/af feeding power up to 30W per PoE

9KB Jumbo frame supported on all ports
port at 45~57VDC at port 5-12

User friendly UI, auto topology drawing, topology
PoE management including PoE detection and
scheduling for PD (power devices)

N-key** configurator for mass firmware upgrade,
demo, complete CLI for professional setting

Enhanced G.8032 Ring protection in 20ms < 256
WV model can accept two 16.8V~137.5V input with
switches
PoE budget 80W; 12V model can accept dual

9.5V~57V DC input with PoE budget 80W

Galvanic isolation between input and PoE

IEEE 1588 PTP v2 two-step (under 1μs) with 4
Support various ring/chain topologies, including
train dynamic coupling ring/ multiple train ring

Enhanced G.8032 ring configuration with ease

Auto ring configuration(auto mode) for single
Datasheet Version 1.1
www.lantechcom.tw | info@lantechcom.tw
3
Industrial PoE Managed Switches / EN50155 Switches
ring

Co-exist with RSTP on different ports

Train ring for auto coupling topology
InstaConfig** for multiple upgrade

System Event Log, SMTP Email alert, SMS mobile
(text) and SNMP Trap for alarm support; 32 RMON

Provides EFT protection ±2000 VDC for power line.

Supports ±6000 VDC Ethernet ESD protection

Built-in RTC (Real Time Clock) to keep track of time

SSL/SSH/ACL L2&L3

Supports IEEE 802.1p Class of Service, per port

Port Security: MAC address
counters

Security
provides 8 priority queues Port base, Tag Base and
entries/Filter/MAC-Port binding

Type of Service Priority

IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP
IP Security: IP address security management to
prevent unauthorized intruder.
VLAN redundancy

Management access control with priority

4K 802.1Q VLAN, Port based VLAN, GVRP**, QinQ*

Login Security: IEEE802.1X/RADIUS

Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info

HTTPS for secure access to the web interface
can be viewed via Web/ Console/ LantechTM

InstaConfig**/ LantechTM InstaView**

flow (MVR) with multicast packets binding with
DHCP server / client / DHCP Option 82 relay / DHCP
Option 82 server for Port&Vlan based DHCP
ports for IP surveillance application

distribution




Ingress packet filter and egress rate limit

Broadcast/multicast packet filter control
Miss-wiring avoidance

LED indicator

Email, traps, or SMS notification
Repowered auto ring restore


IGMPv1,v2,v3 with Query mode for multimedia;
GMRP**

Watchdog design to auto reboot switch CPU is
found dead

Built-in environmental monitoring for system input
voltage, current, ambient temperature

Supports DIDO (Digital Input/Digital Output)

IP65 aluminum housing with DIN rail** and wall
Ensure the switches in a ring to survive after
power breakout is back

in ring and for reversed multicast video flow

Bandwidth Control

Multicast static route for non- IGMP camera to
prevent flooding; IGMP router port to assign query
Mac based DHCP server to assign IP address that
includes dumb switches in DHCP network
Static multicast forwarding forward reversed IGMP
mount design

Bypass protection** - Bypass failed switch caused
The status can be shown in NMS when each
by power failure of switch to protect network
switch is back
intactness
TFTP/HTTP firmware upgrade; LantechTM
DIMENSIONS (unit=mm)
Datasheet Version 1.1
www.lantechcom.tw | info@lantechcom.tw
4
Industrial PoE Managed Switches / EN50155 Switches
SPECIFICATION
Hardware Specification
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE802.3at/af Power over Ethernet
Switch
Architecture
Back-plane (Switching Fabric): 9.6Gbps
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port
CPU
Marvell 800Mhz
Mac Address
16K MAC address table
Jumbo frame
9KB on all ports
Connectors
10/100TX: 8 x ports M12 4-pole D-coded with Auto
MDI/MDI-X function
10/100/1000T: 4 x ports M12 8-pole X-coded with Auto
MDI/MDI-X function
RS-232/Relay connector: 1 x M12 5-pole A-coded
Power Input connector : 1 x M12 4-pole T-coded (12V
model); 1 x M12 4-pole A-coded (WV model)
DIDO : 1 x M12 5-pole A-coded
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
Case
Dimension
IP65 model: Aluminum case
Weight
1.0kgs
Installation
DIN Rail** and Wall Mount Design
EMI & EMS
FCC Class A,
CE EN61000-6-2, CE EN61000-6-4, CE EN61000-4-2,
CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5,
CE EN61000-4-6, CE N61000-4-8, EN61000-4-11
Stability
Testing
IEC56068-2-32 (Free fall), EN61373 (Shock and
Vibration)
MTBF
229,174 hrs
Certifications&
report*
EN50155/EN50121-3-2/EN50121-4 Certificate
EN45545-2 R24/R25 (EN ISO 4589-2, EN ISO 5659-2,
NF X70-100-1 & 2) Fire & Smoke Certificate
Warranty
5 years
Software Specification
Management
SNMP v1 v2c, v3/ Web/Telnet/CLI
SNMP MIB
RFC 1215 Traps MIB,
RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB,
RFC 1573 IF MIB
RFC 2544 VLAN MIB,
Partial RFC 1643 EtherLike,
Partial RFC 1757 RMON,
RFC 2544 Q-Bridge MIB; Bridge MIB,P-Bridge MIB*
RFC 2790 Host Resource MIB
LLDP MIB*
RSTP MIB*
Private MIB
ITU G.8032
Support ITU G.8032 v2/2012 for Ring protection in less
than 20ms for self-heal recovery (basic mode)
Support various ring/chain topologies
Includes train dynamic coupling ring
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
Bypass
Protection**
High-speed optical switching (<4ms)
Minimal insertion loss (Max 1.6dB as Bypass Mode)
Protocol
CSMA/CD
LED
Per unit: Power 1 (Green), Power 2 (Green), P-Fail
(Red)
Ethernet port: Link/Activity (Green), PoE (Green);
DI/DO
2 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
2 Digital Output(DO): Open collector to 40 VDC, 200mA
Operating
Humidity
5% ~ 95% (Non-condensing)
Operating
Temperature
-40°C~75°C / -40°F~154°F
Storage
Temperature
-40°C~85°C / -40°F~185°F
Power Supply
Dual 16.8~137.5VDC for WV model
Dual 9.5~57VDC for 12V model
PoE Budget
PoE pin
assignment
Power
Consumption
WV model:
24V: 60W / WV: 80W
12V model:
24V: 120W / 12V: 80W
M12 port # 5~#12 support IEEE 802.3at/af End-point,
Alternative A mode. Per port provides 30W PoE at/15W
PoE af
Without PoE: Max.13W
With PoE: Max. 18W
178mm(W)x99mm(H)x103mm(D)
Enhanced G.8032 ring configuration with ease
Co-exist with RSTP on different ports
Train mode for auto coupling ring/multiple train ring
configuration
PoE
Management
1.
2.
3.
PoE Detection to check if PD is hang up then
restart the PD
PoE Scheduling to On/OFF PD upon routine
time table
On/ Off, voltage, current, watts, temperature
PTP v2
Support hardware-based IEEE1588 PTPv2 in 1μs, End
to End (2-step) and Peer to Peer (2-step) modes in
Transparent Clock, 4 10/100/1000T
User friendly
UI




Auto topology drawing
Topology demo
Auto configuration for G.8032(auto mode) for
single ring
Complete CLI for professional setting
Port Trunk
with LACP
LACP Port Trunk: 8 Trunk groups/Maximum 8 trunk
LLDP
Supports LLDP to allow switch to advise its
identification and capability on the LAN
CDP
Cisco Discovery Protocol for topology mapping
Environmental
Monitoring
System status for input voltage, current and ambient
temperature to be shown in GUI and sent alerting if any
abnormal status
VLAN
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to
4K, VLAN ID can be assigned from 1 to 4096.)
GVRP** (256 Groups)**, QinQ*
IPv6/4
Present
Spanning Tree
Supports IEEE802.1d Spanning Tree and IEEE802.1w
Rapid Spanning Tree, IEEE802.1s Multiple Spanning
Tree
Quality of
Service
The quality of service determined by port, Tag and IPv4
Type of service, IPv4 Differentiated Services Code
members
Datasheet Version 1.1
www.lantechcom.tw | info@lantechcom.tw
5
Industrial PoE Managed Switches / EN50155 Switches
Points - DSCP
SMTP/Text
Supports SMTP Server and 8 e-mail accounts for
Class of
Service
Support IEEE802.1p class of service, per port provides
8 priority queues
SMS
receiving event alert; can send SMS text alert via
QoS by VLAN
Tagged QoS by VLAN for all devices in the network
Protection
IP Security
Supports 10 IP addresses that have permission to
access the switch management and to prevent
unauthorized intruder.
SNMP Trap
Login Security
Supports IEEE802.1X Authentication/RADIUS
Port Mirror
Support 3 mirroring types: “RX, TX and Both packet”
Network
Security
Support 10 IP addresses that have permission to
access the switch management and to prevent
unauthorized intruder.
802.1X access control for port based and MAC based
authentication/MAC-Port binding
Management access control with priority
256 Policy based Access Control List
SSL/ SSH for Management
mobile

Miss-wiring avoidance

Repowered auto ring restore

Loop protection
Up to 10 trap stations; trap types including:

Device cold start

Authorization failure

Port link up/link down

DI/DO open/close

Typology change(ITU ring)

PoE ping failure

Power failure

Environmental abnormal
DHCP
Provide DHCP Client/ DHCP Server/DHCP Option 82/
DHCP Option 82 server/ Port based&VLAN based
DHCP distribution (DHCP relay agent)
HTTPS for secure access to the web interface
Mac based
Assign IP address by Mac that can include dumb switch
TACACS+ for Authentication
DHCP Server
in DHCP network
IGMP
Support IGMP snooping v1,v2,v3; Supports IGMP static
route; 256 multicast groups; IGMP router port ; IGMP
query; GMRP**
DNS
Provide DNS client feature and support Primary and
Secondary DNS server.
SNTP
Supports SNTP to synchronize system clock in Internet
MVR
Static multicast forwarding forward reversed IGMP flow
Firmware
Update
Supports TFTP firmware update, TFTP backup and
restore; HTTP firmware upgrade; LantechTM
InstaConfig** for multiple upgrade
N-Key
RJ45 dongle for firmware upgrade, auto / editable
Configurator**
configuration backup/restoration
Configuration
upload and
download
Supports text configuration file for system quick
installation
IfAlias
Each port allows an alphabetic string of 128-byte
assigned as its own unique name via the SNMP or CLI
interface
(MVR) with multicast packets binding with ports for IP
surveillance application
Bandwidth
Control
Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are
Broadcast/Multicast/Flooded Unicast packet,
Broadcast/Multicast packet, Broadcast packet only and
all types of packet.
The packet filter rate can be set an accurate value
through the pull-down menu for the ingress packet filter
and the egress packet limit.
RTC
Built-in Real Time Clock to keep track of time always
Flow Control
Supports Flow Control for Full-duplex and Back
Pressure for Half-duplex
System Log
Supports System log record and remote system log
server
*Future release
**Optional
ORDERING INFOMATION
All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models
are available with –C model name.

IPES-5408S-X-WV-65…….……..….….......P/N: 8356-83629
8 10/100TX PoE at/af up to 30W + 4 10/100/1000T X-coded PTP L2+ Managed Industrial PoE M12 IP65 Switch; 16.8V~137.5V
dual isolated input; -40°C to 75°C

IPES-5408S-X-WV-65-B…….……..….…...P/N: 8361-83629
8 10/100TX PoE at/af up to 30W + 4 10/100/1000T X-coded PTP L2+ Managed Industrial PoE M12 IP65 Switch;16.8~137.5V
dual isolated input; -40°C to 75°C; 1 pair bypass protection

IPES-5408S-X-12V-65…….……..….….......P/N: 8356-83729
8 10/100TX PoE at/af up to 30W + 4 10/100/1000T X-coded PTP L2+ Managed Industrial PoE M12 IP65 Switch; 9.5V~57V dual
input; -40°C to 75°C

IPES-5408S-X-12V-65-B…….……..….…...P/N: 8361-83729
8 10/100TX PoE at/af up to 30W + 4 10/100/1000T X-coded PTP L2+ Managed Industrial PoE M12 IP65 Switch; 9.5~57V dual
input; -40°C to 75°C; 1 pair bypass protection

N-key Configurator……………..………….P/N: 8850-100
RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 56°
OPTIONAL ACCESSORIES
M12/M23 Connector / Cable
 ECONM12-4P(F)70CM CABLE
 ECAB124030MJS
 ECABM12X83MSTP
M12 power cable 90 degree angle, 70cm, 4 pin
4 Pin M12 RJ45 Male 3 Meters; STP Cable
8 Pin M12 X-coded RJ45 Male 3 METER, STP CABLE w/ Shielding
Lantech Communications Global Inc.
www.lantechcom.tw
info@lantechcom.tw
© 2015 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 1.1
www.lantechcom.tw | info@lantechcom.tw