Fiber Optic Panels
Fumo
Fumo Communications
Communications
LL-PP/FO/WM1-8SCSX-E
— Wall mounting fiber optic patch panel, 8x SCSX, splicing device (optional), unloaded —
Lockable front door
Coloring: RAL 7035 (light grey), other colors available on request
APPLICATION
Developed to represent the small and most cost-effective solution of Fumo’s range of wall mounting fiber optic patch panel, featuring changeable adapter plates and internal fiber management. e standard
configuration includes one front plate with 8 outlets SC-simplex footprint and two plastic cable/fiber organizer. Splice trays, splice holders and splice protector’s choice-wise heat-shrink or crimp variation on
request. Benefits: direct wall fixation, fast and simple installation, little requirement of manpower, multiple cable access points for maximum versatility, cost-effective.
PATCHPANEL WALL MOUNTING
TECHNICAL SPECIFICATION
Panel
: standard panel kit 8 x outlets SCSX footprint
Adapters
: SCSX, LCDX, E2000
Capacity
: up to 16 fibers
Type
: wall mounting
Material of panel
: grade steel
ickness of wall‘s
: 1,20mm (nominal)
Dimension
: 150mm x 265mm x 55mm (W x D x H)
Door lock
: key lock
Cable entry
: 2x exit way with insulation
Coating
: powder coating
Standard colors
: RAL 7035 - light grey
ACCESSORIES (OPTIONAL)
- FOR SPLICING DEVICES -
(other colors available on request)
• Stackable splice tray 2/24 splices
Colors of numbering
• Splice comb (holder) 6/12 splices
: black
(other colors available on request)
Material of splice tray
: plastic compound
Material of splice holder
: plastic compound
• Splice protectors heat shrink/crimp
FEATURES
•
Housing with lockable swivel lid
•
Two openings with dust-tight strips for incoming and outgoing cables, for fastening with cable ties
•
Holders for max. 4 splice cassettes or 2 splice cassettes plus one adapter plate
•
Paint finish: RAL 7035 (light grey)
PACKAGING
•
High density cardboard.
•
Corners are supported with Styrapor-protection.
© Fumo2013. All Rights Reserved. – All values in this data sheet are nominal.
Rev. 11/2013
e information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the
written consent of Fumo. e information is believed correct at the time of issue. Fumo reserves the right to amend this specification without
notice. Specification is not contractually valid unless specifically authorized by Fumo.
IGHTLINE
www.fumocom.com
Fumo
Fumo Communications
Communications