4K HDMI Switch, 3x1
Manual
DS-45308
1.0 Introduction
4K HDMI Switch, 3x1 is high performance switch, which can easily switch
three sources to one display. It not only has the key-press-switching
function, but also has intelligent function. With one fixed HDMI cable
(pigtail), this adapter is cost and time saving for consumers.
The 4K HDMI Switch, 3x1 routes high definition video (in multiple
resolutions up to 4Kx2K) and digital audio from any one of the three
sources to display units. All inputs accommodate the connections of the
high definition video sources simultaneously, compatible well for HD-DVD,
SKY-STB, PS3, Xbox360 etc. The output sends high definition audio/video
signals to a high definition display.
1.1 Intelligent function
1. Once the source device is "ON" or plug-in (should stay power-on mode),
the switcher will automatically select this source.
2. Once the source device is turned off or plugged out, the switcher will
select the next power-on source depending on the sequence
automatically.
Note:

The intelligent function is based on power detection. When the
source devices are on the "stand-by mode", the switcher will not
select next power-on source automatically
1.2 Features and Supports
This HDMI Switcher has many features that enable it to perform in a
superior manner. Among those features you will find:







Multifunctional on switching: intelligent or mechanical
Support highest video resolution 4Kx2K@60Hz
Support 600MHz/6Gbps per channel (18Gbps all channel) bandwidth
Support 12bit per channel (36bit all channel) deep color
Support HDCP pass-through
Support uncompressed audio such as LPCM
Support compressed audio such as DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD)
 Support 3D all format
1
2.0 Specifications
Signal Inputs/Output
Input DDC Signal
Maximum Single Link Range
Output Video
Operating Frequency
Vertical Frequency Range
Video Amplifier Bandwidth
Resolutions(HDTV)
Interlaced(50&60Hz)
Progressive(50&60Hz)
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Requirement
External Power Supply
Power consumption (Max)
Regulatory Approvals
Converter Unit
5 volts p-p (TTL)
4KX2K@60HZ
HDMI
50/60Hz
18Gbps/600MHz
480i,576i,1080i
480p, 576p, 720p, 1080p
0 ℃ to +70℃
10% to 85 % RH (no condensation)
-10℃ to +80℃
5% to 90 % RH (no condensation)
No power needed
5W
FCC,CE,UL
Note: Specifications are subject to change without notice.
3.0 Package Contents


Main unit
User's Manual
2
4.0 Panel Descriptions
5.0 Connection and Operation
1. Connect the HDMI input sources into the HDMI switcher
(Input cables are optional)
 Please refer to connection diagram section
2. Connect the fixed HDMI cable (pigtail) to display
3. Press the “select” button to select input sources
Attention: Insert / Extract cable gently.
3
5.1 Connection and Operation
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The
complete declaration of conformity can be requested by post under the below mentioned
manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to
prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
4