professional washer extractor - Grandimpianti genuinelaundryspare

www.groupdynamics-laundry.com
sales@groupdynamics.lv
PROFESSIONAL WASHER EXTRACTOR
11kg
INSTALLATION, MAINTENANCE AND USER'S MANUAL
MFL67360460
Publication date: Aug 2013
www.groupdynamics-laundry.com
sales@groupdynamics.lv
www.groupdynamics-laundry.com
sales@groupdynamics.lv
OWNER’S MANUAL
COMMERCIAL WASHER
Before beginning installation, read these instructions carefully. This will simplify
installation and ensure that the washer is installed correctly and safely.
Leave these instructions near the washer after installation for future reference.
V ersions
COIN , STACK ABLE
COIN
OPL
2
www.groupdynamics-laundry.com
PRODUCT FEATURES
sales@groupdynamics.lv
PRODUCT FEATURES
DIRECT DRIVE SYSTEM
The advanced Brushless DC motor directly drives the drum without using a belt and pulley.
TILTED DRUM AND EXTRA LARGE DOOR OPENING
The tilted drum and extra large opening make it possible to load and unload clothing more easily.
ULTRA CAPACITY
The larger drum enables more tumbling action and greater centrifugal force, but also less tangling and wrinkling of the laundry.
Heavier loads, such as king size comforters, blankets, and curtains, can be washed.
SEE-THROUGH DOOR AND BIG DOOR
You can see the laundry throughout the cycle.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow
the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When
the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the
interior of the washer to dry.
STAINLESS STEEL DRUM
www.groupdynamics-laundry.com
sales@groupdynamics.lv
IMPORTANT SAFETY INSTRUCTIONS
3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
e have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
W
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION.
These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
Warning
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
4
www.groupdynamics-laundry.com
IMPORTANT SAFETY INSTRUCTIONS
sales@groupdynamics.lv
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
BASIC SAFETY PRECAUTIONS
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the
following:
• Read all instructions before using the washer.
• Do not wash articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry cleaning
solvents, or other flammable or explosive substances, as
they give off vapors that could ignite or explode.
• Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
• Under certain conditions, hydrogen gas may be produced
in a hot water system that has not been used for 2 weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the washing machine, turn on all hot water faucets and
let the water flow from each for several minutes. This
will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this
time.
• Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is
used near children.
• Before the washer is removed from service or discarded,
remove the door to prevent children from hiding inside.
• Do not install or store the washer where it will be exposed
to the weather.
• Do not tamper with the controls.
• Do not repair or replace any part of the washer or attempt
any servicing unless specifically recommended in the
user-maintenance instructions or published user-repair
instructions that you understand and have the skills to carry
out.
• See Installation Instructions for grounding requirements.
• ALWAYS follow the fabric care instructions supplied by the
garment manufacturer.
• Do not place items exposed to cooking oil in your washer.
Items contaminated with cooking oils may contribute to a
chemical reaction that could cause a load to catch fire.
• Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.
Warning
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Consult a qualified electrician
or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the
appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
IMPORTANT SAFETY INSTRUCTIONS
5
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the
following:
• Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures.
Installation instructions are packed in the washer for
installer's reference. If the washer is moved to a new
location, have it checked and reinstalled by a qualified service
person. Failure to follow this warning can cause serious
injury, fire, electric shock or death.
• Do not, under any circumstances cut or remove the third
(ground) prong from the power cord.
Failure to follow this warning can cause serious injury, fire,
electric shock or death.
• For personal safety, this appliance must be properly
grounded.
Failure to follow this warning can cause serious injury, fire,
electric shock or death.
• The power cord of this appliance is equipped with a 3-prong
(grounding) plug which fits a standard 3-prong (grounding)
wall outlet to minimize the possibillty of electric shock hazard
from this appliance.
• This washer must be plugged into a 220-240 V~, 50 Hz
grounded outlet. Failure to follow this warning can cause
serious injury, fire, electric shock, or death.
• Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• Do not install on carpet. Install the washer on a solid floor.
Failure to follow this warning can cause serious leak damage.
• The openings must not be obstructed by a carpet.
• Do not remove the ground prong. Do not use an adapter or
extension cord. Plug into a grounded 3 prong outlet.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• The washer should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the
rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a fire
hazard from overheated wires.
• Never unplug your washer by pulling on the power cord.
Always grip the plug firmly and pull straight out from the
outlet. Failure to follow this warning can cause serious injury,
fire, electric shock, or death.
• Repair or replace all power cords that have become frayed
or otherwise damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at either end.
Failure to follow this warning can cause serious injury, fire,
electric shock,or death.
• When installing or moving the washer, be careful not to
pinch, crush, or damage the power cord. Failure to follow
this warning can cause serious injury, fire, electric shock, or
death.
• The washer must be installed and electrically grounded by
a qualified service person in accordance with local codes, to
prevent shock hazard and assure stability during operation.
• The washer is heavy. Two or more people are needed to
install and move the appliance.
Failure to do so can result in back or other injury
• Store and install the washer where it will not be exposed
to temperatures below freezing or exposed to outdoor
weather conditions.
Failure to follow this warning can cause serious leak damage.
• Do not install the washer in humid spaces to reduce the risk
of electric shock.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• To reduce the risk of injury to persons, adhere to all industry
recommended safety procedures including the use of long
sleeved gloves and safety glasses. Failure to follow all of
the safety warnings in this manual could result in property
damage, injury to persons or death.
• Keep the area underneath and around your appliances free
of combustible materials such as lint, paper, rags, chemicals,
etc. Failure to do so can result in fire.
6
www.groupdynamics-laundry.com
IMPORTANT SAFETY INSTRUCTIONS
sales@groupdynamics.lv
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the
following:
• Unplug the washer before cleaning to avoid the risk of
electric shock.
• Never use harsh chemicals, abrasive cleaners, or solvents
to clean the washer. They will damage the finish.
• Do not put oily or greasy rags or clothing on top of the
washer. These substances give off vapors that could ignite
the materials.
• Do not wash items that are soiled with vegetable or cooking
oil. These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire
by itself.
• Disconnect this appliance from the power supply before
attempting any user maintenance.
Turning the controls to the OFF position does not disconnect
this appliance from the power supply.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• Do not combine laundry products for use in 1 load unless
specified on the label. Do not mix chlorine bleach with
ammonia or acids such as vinegar.
Follow package directions when using laundry products.
Incorrect usage can produce poisonous gasresulting in
serious injury or death.
• Do not reach into the washer while parts are moving.
Before loading, unloading, or adding items, push in the cycle
selector knob and allow the drum to coast to a complete
stop before reaching inside.
Failure to follow this warning can cause serious injury, fire,
electric shock, or death.
• This appliance is not to be used by children or persons with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction.
• Children should be supervised not to play with the appliance.
• Do not allow children to play on or in the washer.
Close supervision of children is necessary when the washer
is used near children. As children grow, teach them the
proper, safe use of all appliances.
Failure to comply with these warnings could result in serious
personal injuries.
• Destroy the carton, plastic bag, and other packing materials
after the washer is unpacked.
Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets
can become airtight chambers. Failure to comply with these
warnings could result in serious personal injuries.
• Keep laundry products out of children's reach.
To prevent injury to persons, observe all warnings on product
labels. Failure to comply with these warnings could result in
serious personal injuries.
• Remove the door to the washing compartment to avoid the
danger of children or small animals getting trapped inside
before your washer is removed from service or discarded.
Failure to do so can result injury or death.
• Before the washer is removed from service or discarded,
remove the washer door to prevent accidental entrapment.
Failure to comply with these warnings could result in serious
personal injuries.
• Washing Machine is to be connected to the water mains
using new hose-sets and that old hose-sets should not be
used.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
TABLE OF CONTENTS
7
TABLE OF CONTENTS
2
PRODUCT FEATURES
3
IMPORTANT SAFETY INSTRUCTIONS
4
4
5
6
BASIC SAFETY PRECAUTIONS
GROUNDING INSTRUCTIONS
SAFETY INSTRUCTIONS FOR INSTALLATION
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING,
AND DISPOSAL
8
INTRODUCING YOUR WASHING MACHINE
8
9
Part and Accessories
Control panel features
13
INSTALLATION INSTRUCTIONS
13
14
15
16
17
Checking and choosing the proper location
Unpacking and removing shipping bolts
Connecting the water lines
Connecting the drain line
Leveling the washing machine
18
PREPARATION
18
19
19
20
20
Precautions for fabric care before wash cycle
Fabric Care Labels
Sorting laundry
About the dispenser
Loading the dispenser
21
OPERATING YOUR Washer
22
PROGRAMMING MODE
23
24
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Coin type -Structure of Programming mode
Programming mode - Setup Mode
- 1. How to change regular price.
-2. How to change regular cold price.
-4. How to change regular hot price
-5. How to change special price
-6. How to change special cold price
-7. How to change special warm price
-8. How to change special hot price
-9. How to change add super wash price
-10. How to change add super wash type
-11. How to enter the FEA1
-11-1. Special price day setup
-11-2. Add super wash setup
-11-3. Vend type setup
-11-4. Pre-wash set up
-12. How to enter the special price day
-12-1. How to change to Sunday
-13. Special price beginning time setup
41
42
43
44
45
46
47
48
49
50
51
52
53
53
54
55
56
57
58
58
59
60
61
62
63
64
65
66
67
68
69
69
70
71
72
73
-14. Special price ending time setup
-15. Washing time set up
-16. Rinsing times per cycle
-17. Rinsing time setup
-18. Top spin speed – final spin time depends on RPM
-19. Value of coin 1
-20. Value of coin 2
-21. Penny increment pricing offset
-22. How to change the water level
-23. Beep volume
-24. Time to keep the coin (Use only for coin type)
-25. Product type setup – coin type or OPL setup
Programming Mode - Test mode
-1. LqC1
-2. Factory reset -EEPt
-3. Time set up
-4. Courtesy cycle
-5. Cycle Kill
Programming Mode - Collect mode
Collect Mode Data lists
OPL type -Structure of Programming mode
-1. How to enter the FEA1
-1-1. Pre-wash set up
-2. Rinsing times per cycle
-3. Rinsing time setup
-4. Top spin speed – final spin time depends on RPM
-5. How to change the water level
-6. Beep volume
-7. Time to keep the coin (Use only for coin type)
-8. How to enter the TYPE
Programming Mode - Test mode
-1. LqC1
-2. Time set up
-3. Cycle Kill
-4. PASSWORD - PASS
-5. TUB CLEAN - tCL
74
MAINTENANCE
74
74
74
75
76
77
Care after wash
-Storing the Washer
-Cleaning the Dispenser
-Cleaning the water inlet filters
-Cleaning the drain pump filter
-Cleaning the door seal
78
ERROR MODE
79
Power Fail Recovery
79
Default washer Settings
79
SPECIFICATIONS
8
www.groupdynamics-laundry.com
INTRODUCING YOUR WASHING MACHINE
sales@groupdynamics.lv
INTRODUCING YOUR WASHING MACHINE
Parts and Accessories
Parts
Detergent
dispenser
drawer
Water inlets
Control panel
Door
Door
seal
Magnet Door
Plunger
(see page 2)
Shipping
bolts
Power cord
Drain hose
Tub
Leveling
feet
Drain pump filter cover
Drain pump filter
Drain hose
Accessories
Hot and Cold
Water Hoses
Wrench
(for removing
shipping bolts and adjusting
leveling feet)
Non-skid pads
Caps (4)
(for covering shipping bolt holes)
Tie Strap
(for securing drain hose)
Elbow Bracket
(for securing drain hose)
www.groupdynamics-laundry.com
sales@groupdynamics.lv
INTRODUCING YOUR WASHING MACHINE
Control panel features
Coin type
- Side by side
5
1
2
4
3
Optional function button
Coin type
- Stack
5
1
2
4
3
Optional function button
1. Display LED
2. Cycle button
3. Optional cycle button
4. Start button
5. Status LED
9
www.groupdynamics-laundry.com
10 sales@groupdynamics.lv
INTRODUCING YOUR WASHING MACHINE
Status LED
Display LED
Cycle button
Start button
Optional function button
Display LED
Optional function button
The display shows the vend price and remaining time and
programming options. Error codes are also displayed here.
Wash time or rinse cycle can be added when additional coin
is inserted or a valid cash is entered.
Start button
The START LED flashes when the full vend price has been
satisfied and the cycle has been chosen.
Cycle button
Press the CYCLE button to select the desired cycle based
on laundry types and conditions.
WHITES
Use for hot washing for heavy fabrics, such as white
clothes, table linens, and heavily soiled clothes.
COLORS
Use for warm washing for heavy fabrics, such as jeans,
corduroys, or work clothes.
DELICATES
Use for cold washing for synthetic fabrics, such as washable
knit fabric and no-iron finishes.
PERM. PRESS
Use for warm washing for sturdy fabrics, such as work
casual work.
Status LED
LED
Description
LED flashes whenever the washing cycle is in
operation.
LED flashes whenever the Rinsing cycle is in
operation.
LED flashes whenever the Spining cycle is in
operation.
ED flashes whenever the door lock is
L
activated.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
INTRODUCING YOUR WASHING MACHINE
Control panel features
OPL type
- Side by side & Stack
5
1
2
4
3
Optional function button
1. Display LED
2. Cycle button
3. Optional cycle button
4. Start button
5. Status LED
11
www.groupdynamics-laundry.com
12 sales@groupdynamics.lv
INTRODUCING YOUR WASHING MACHINE
Status LED
Display LED
Cycle button
Start button
Optional function button
Display LED
Optional function button
The display shows the vend price and remaining time and
programming options. Error codes are also displayed here.
RINSE+SPIN
Rinse,drain and spin only
Use this cycle to rinse detergent form load
Start button
The START LED flashes when the full vend price has been
satisfied and the cycle has been chosen.
Cycle button
Press the CYCLE button to select the desired cycle based
on laundry types and conditions.
90°C MEDICAL
Use it for the more medical wash than 75°C HOT such as
white clothes, baby clothes, sheets and underwear.
75°C HOT
Use it for heavy soiled fabrics such as white clothes,
baby clothes, sheet and underwear.
Status LED
LED
Description
LED flashes whenever the washing cycle is in
operation.
LED flashes whenever the Rinsing cycle is in
operation.
LED flashes whenever the Spining cycle is in
operation.
60°C NORMAL
Use it for heavy soiled fabrics such as baby wear, underwear
and white clothes.
40°C NORMAL
Use it for normal soiled fabrics such as cotton, linen, towels,
shirts and jeans.
ED flashes whenever the door lock is
L
activated.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
INSTALLATION INSTRUCTIONS
13
INSTALLATION INSTRUCTIONS
Checking and choosing the proper
location
Install the washing machine on a solid floor that is strong
and rigid enough to support the weight of the washing
machine, even when fully loaded, without flexing or
bouncing. If the floor has too much flex, you may need to
reinforce it to make it more rigid. If the floor is not solid, it
may cause severe vibration and noise.
Installing on a floor
221/4”
(57 cm)
1 Clean the floor before installation.
- Make sure to select solid and smooth ground.
3,0,.2”
(76.7 cm)
51”
(129.7 cm)
2 Two or more people are needed for moving and
unpacking the washing machine.
3 Allow for sufficient space between the walls and the
4”
(10 cm)
washing machine for installation.
Space requirements
You must allow sufficient space for water lines, the drain
line, and airflow.
NOTE
• Be sure to allow for wall, door, or floor moldings that
may increase the required clearances.
1”
(2.5 cm)
27”
(68.6 cm)
1”
(2.5 cm)
NOTE
• The floor must be strong and rigid enough to support
the weight of the washer, when fully loaded, without
flexing or bouncing. If your floor has too much flex,
you may need to reinforce it to make it more rigid.
A floor that is adequate for a top-loading washer may
not be rigid enough for a front loading washer, due to
the difference in the spin speed and direction. If the
floor is not solid, your washer may vibrate and you may
hear and feel the vibration throughout your house.
• Before installing the washer, make sure the floor is
clean, dry and free of dust, dirt, water and oils so the
washer feet can not slide easily. Leveling feet that can
move or slide on the floor can contribute to excess
vibration and noise due to poor contact with the floor.
www.groupdynamics-laundry.com
14 sales@groupdynamics.lv
INSTALLATION INSTRUCTIONS
Unpacking and removing shipping
bolts
When removing the washer from the carton base, be sure
to remove the foam drum support in the middle of the
carton base.
If you must lay the washer down to remove the base
packaging materials, always lay it carefully on its side.
DO NOT lay the washer on its front or back.
1 Remove the bottom two shipping bolts with the wrench
(included) to fully loosen all four shipping bolts by turning
them counterclockwise and then pulling them out.
Retainer
Shipping
bolt
2 Locate the four hole caps included in the accessory pack
and install them in the shipping bolt holes.
Foam Tub Support
Carton Base
Cap
NOTE
• Save the bolt assemblies for future use. To prevent
damage to internal components, DO NOT transport the
washer without reinstalling the shipping bolts.
• Failure to remove shipping bolts and retainers may
cause severe vibration and noise, which can lead to
permanent damage to the washer. The cord is secured
to the back of the washer with a shipping bolt to help
prevent operation with shipping bolts in place.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
INSTALLATION INSTRUCTIONS
15
Connecting the water lines
1 Check the rubber seals on both sides of the hose.
- Insert a rubber seal into the threaded fittings on each
hose to prevent leaking.
Rubber seal
4 Connect the hoses to the water inlets tightly by hand and
then tighten another 2/3 turn with pliers.
- Connect the blue hose to the cold water inlet and the
red hose to the hot water inlet.
Rubber seal
Water hose
(To faucet)
Water hose
(To water inlet on the
washing machine)
2 Connect the water supply hoses to the HOT and COLD
water faucets tightly by hand and then tighten another
2/3 turn with pliers.
- Connect the blue hose to a cold water faucet and the
red hose to a hot water faucet.
Cold
water
inlet
Hot water
inlet
WARNING
• Do not overtighten the hoses.
Overtightening can damage the valves resulting in
leaking and property damage.
5 Check for leaks by turning on the faucets.
-If water leaks, check steps 1 to 4 again.
NOTE
WARNING
• Do not overtighten. Damage to the coupling can result.
3 After connecting inlet hose to water faucets, turn on the
water faucets to flush out foreign substances (dirt, sand
or sawdust) in the water lines. Let water drain into a
bucket, and check the water temperature.
• For your safety, and for extended product life, use only
authorized components. The manufacturer is not responsible for product malfunction or accidents caused
by the use of separately purchased unauthorized parts.
• Use new hoses when you install the washing machine.
Do not reuse old hoses. Use only the inlet hoses
provided with the washer. The manufacturer does not
recommend the use of aftermarket hoses.
• Periodically check the hoses for cracks, leaks and wear,
and replace the hoses every 5 years.
• Do not stretch the water hoses intentionally, and make
sure that they are not crushed by other objects.
• Water supply pressure must be between 14.5 PSI and
116 PSI (100~800 kPa). If the water supply pressure is
more than 116 PSI, a pressure reducing valve must be
installed.
• To provide optimum washing performance the hot water temperature should be set at 120-135°F (48-57°C)
and the cold at 60°F (15°C).
www.groupdynamics-laundry.com
16 sales@groupdynamics.lv
INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent moving and
leaking.
NOTE
• The drain hose should be properly secured. Failure to
properly secure the drain hose can result in flooding
and malfunction.
• Total height of the house end should not exceed 96
inches (244.8 cm) from the bottom of the washer.
• The drain must be installed in accordance with any applicable local codes and regulations.
• Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Using a laundry tub
1 Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10 cm) from
the end of the drain hose. If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
elbow bracket, mold, or microorganisms could spread to
the inside of the washer.
No more than
4 inches (10 cm)
Elbow Bracket
Using a standpipe
lip the end of the hose into the elbow bracket.
1 C
- Connect the elbow bracket within 4 inches (10 cm) from
the end of the drain hose. If the drain hose is extended
more than 4 inches (10 cm) beyond the end of the
elbow bracket, mold or microorganisms could spread to
the inside of the washer.
2 Hang the end of the drain hose over the side of the
laundry tub.
Elbow
Bracket
Laundry Tub
max. 96”
(2.4 m)
No more than
4 inches (10 cm)
max. 96”
(2.4 m)
Elbow Bracket
Drain Hose
Tie Strap
2 Insert the end of the drain hose into the standpipe.
3 Use a tie strap to secure the drain hose in place.
Elbow Bracket
Drain Hose
se a tie strap to secure the drain hose in place.
3 U
www.groupdynamics-laundry.com
sales@groupdynamics.lv
INSTALLATION INSTRUCTIONS
Leveling the washing machine
17
4 Check the washing machine’s level again.
The washer tub of your new washing machine spins at very
high speeds. To minimize vibration, noise, and unwanted
movement, the floor must be perfectly level and solid.
heck the washing machine’s level.
1 C
- Check the precise level by rocking the top edges of
the washing machine or placing a level on the washing
machine. The slope beneath the washing machine must
not exceed 1°, and all four leveling feet must rest firmly
on the floor.
Level
- Push or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock.
- If the washing machine rocks, repeat steps 1 to 3.
WARNING
• Using the washing machine without leveling, it may result in malfunction caused by the production of excess
vibration and noise.
• Use the leveling feet only when you level the washing
machine. If you raise the leveling feet unnecessarily, it
may cause abnormal vibration of the washing machine.
Using non-skid pads (optional)
1°
2 T urn the lower leveling feet clockwise to level the washing
machine.
- Turning the lower leveling feet clockwise raises the
washing machine.
If you install the washing machine on a slippery surface, it
may move because of excessive vibration. Incorrect leveling
may cause malfunction through noise and vibration. In the
event of this, lay the non-skid pads under the leveling feet
and adjust the level.
1 Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign objects or
moisture. If moisture remains, the non-skid pads may
slip.
2 Adjust the level after placing the washing machine in the
installation area.
3 Place the adhesive side of the non-skid pad on the floor.
- It is most effective to install the non-skid pads under the
front legs. If it is hard to place the pads under the front
legs, place them under the back legs.
Raise
This side up
3 T urn the locknuts counterclockwise and tighten them
Adhesive
side
when the washing machine is level.
Remove
backing
Tighten all 4 lock
nuts securely using
the wrench.
4 Check the washing machine’s level again.
- Push or rock the top edges of the washing machine
gently to make sure that the washing machine does not
rock. If the washing machine rocks, level the washing
machine again.
www.groupdynamics-laundry.com
18 sales@groupdynamics.lv
PREPARATION
PREPARATION
Precautions for fabric care before wash cycle
Read and observe the following to prevent shrinkage or damage to clothes.
uu Check all pockets to make sure that they are empty.
-Items such as clips, matches, pens, coins, and keys can
damage both your washer and your clothes.
uu Close zippers, hooks, and drawstrings to prevent these
items from snagging or tangling on other clothes.
uu Pretreat heavily stained areas before washing.
- Doing so will produce clean, stain-free results.
uu Combine large and small items in a load. Load large items
first.
uu Large items should not be more than half of the total
washload.
uu The washer can be fully loaded, but the drum should not be
tightly packed with items.
-The door of the washer should close easily.
uu Do not wash single items, except for bulky items such as
blankets. Make sure to wash laundry in similar types of
loads.
- Washing a single small item may result in the tub
becoming unbalanced, vibrating and making a noise.
uu Do not wash waterproof clothes.
- This may cause abnormal vibration, or may cause the load
to bounce, which could damage the tub.
uu Check if there are any other foreign objects in the door seal
and take extra care that clothes do not get caught there.
- Foreign objects in the door seal may stain clothes, and
water may leak if clothes get caught in the door seal.
uu Wash underwear or small, light items in a laundry net.
- Small, light items may get caught in the door seal, and a
brassiere hook may damage other items or the tub.
uu Brush heavy soil, dust, or hair off fabrics before washing.
- Laundry may not wash clean if there is dirt or sand on
the fabrics, or they may damage due to particles rubbing
against sheer fabrics.
uu Wash blankets individually.
- Washing more than one blanket together may produce
unclean results due to tangling or an unbalanced load.
uu Always separate fabrics according to their colors and wash
them separately to prevent colors from running.
- Fabrics may damage or become stained due to fabric dyes
running, or due to foreign objects transferring from one
fabric to another.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
PREPARATION
19
Fabric care labels
Sorting laundry
Most articles of clothing feature fabric care labels that include
instructions for proper care.
It is recommended that you sort laundry into similar loads
that are washable in the same cycle.
Refer to the following chart for sorting clothes
Category
Label
Directions
Hand Wash
Machine Wash, Normal Cycle
se Permanent Press/Wrinkle
U
Resistant washing machine
setting (which has a cool down or
cold spray before the reduced
spin)
Washing
Use Gentle/Delicate washing
machine setting (slow agitation
and/ or reduced wash time).
Do Not Wash
Do Not Wring
Hot
Water Temperature
Warm
Cold/Cool
Any Bleach (When Needed)
Only Non-Chlorine Bleach (When
Needed)
Bleach symbols
Do Not Bleach
Colors
Whites / Lights / Darks
Soil
Heavy / Normal / Light
Fabric
Lint
Delicates / Easy Care / Sturdy Cottons
Lint Producers / Lint Collectors
www.groupdynamics-laundry.com
20 sales@groupdynamics.lv
PREPARATION
About the dispenser
Liquid Bleach Compartment
The automatic dispenser consists of three compartments
which hold:
• Liquid chlorine bleach.
• Liquid fabric softener.
• Liquid or powdered detergent and color-safe bleach for main
wash.
All laundry products can be added at once in their respective
dispenser compartments. They will be dispensed at the
appropriate time for the most effective cleaning.
After adding the laundry products to the dispenser, close the
dispenser drawer.
To add detergent, bleach, and fabric softener to the automatic
dispenser:
1. Open the dispenser drawer.
2. Load the laundry products into the appropriate
compartments.
3. Slowly close the dispenser drawer to avoid early dispensing
of the laundry products.
NOTE
NOTE
• Do not add powdered or liquid color-safe bleach to this
compartment.
• Always follow the manufacturer’s recommendations
when adding bleach. Do not exceed the maximum fill
line. Using too much bleach can damage fabrics.
• Never pour undiluted liquid chlorine bleach directly onto
the load or into the drum. Fabric damage can occur.
Fabric Softener Compartment
This compartment holds liquid fabric softener, which will be
automatically dispensed during the final rinse cycle.
NOTE
• It is normal for a small amount of water to remain in the
dispenser compartments at the end of the cycle.
Loading the dispenser
Main Wash Detergent Compartment
This compartment holds laundry detergent for the main wash
cycle, which is added to the load at the beginning of the cycle.
Follow the detergent manufacturer's instructions with respect
to the amount of detergent to use, and never use more than
the recommended amount. Using too much detergent can
result in detergent buildup in clothing and the washer. Either
powdered or liquid detergent may be used.
NOTE
• Liquid or powdered color-safe bleach may be added to the
main wash compartment with detergent of the same type.
Main Wash Detergent
Compartment
Liquid Chlorine
Bleach Compartment
This compartment holds liquid chlorine bleach, which will be
dispensed automatically at the proper time during the wash
cycle.
Liquid Fabric
Softener Compartment
• Always follow the manufacturer’s recommendations
when adding fabric softener. Do not exceed the maximum fill line. Using too much fabric softener may result
in stained clothes.
• Dilute concentrated fabric softeners with warm water.
Do not exceed the maximum fill line.
• Never pour fabric softener directly onto the load or into
the drum.
• Do not add the fabric softener sheets to this
compartment.
• Do not add ‘fabric sheet softener’ into the dispenser
draw as it is likely to cause water to leak out. If ‘fabric
sheet softener’ has been added, please pull out the
dispenser draw and remove.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
OPERATING YOUR Washer
21
OPERATING YOUR Washer
1. Ready mode
2) OPL type
1) Coin
CYCLE
– The cycle LEDs flash at the same time, when the
price of cycles are equal.
2. Insert coin
Insert a cash card that has a sufficient balance.
• Insert a sufficient amount of change that is more than
the programmed vend price for the selected cycle.
NOTE
• The machine will not start until sufficient coins are
inserted.
3. Select the cycle
Spin Speed
90°C MEDICAL
Extra Hot/Cold
High
75°C HOT
Extra Hot/Cold
High
60°C NORMAL
Hot/Cold
High
40°C NORMAL
Warm/ Cold
Middle
DELICATES
Cold/Cold
Low
RINSE+SPIN
(OPTION)
Cold/Cold
High
4. Add super wash
Press the desired button and press the start button.
The display LED will show the remaining time and the
selected cycle starts.
• Select cycles designed for different types of fabric and soil
levels.
ash time or rinse cycle can be added when additional
W
coin is inserted or a valid cash is entered.
5. Change course ou cannot change the course while the machine is
Y
running.
1) Coin type
Fabric type
Wash/Rinse
Temp.
Spin
Speed
WHITES
Cotton, linen, towels,
shirts, sheets
Hot/Cold
High
COLORS
Mixed loads,
work clothes,
jeans, shirts
Warm/ Cold
High
DELICATES
Dress shirts,
blouses, nylons,
sheer or lacey
garments
PERM.
PRESS
Dress shirts, pants,
wrinkle-free clothing,
cotton/poly blend
clothing, tablecloths
CYCLE
Wash/Rinse Temp.
Cold/ Cold
Low
Warm/ Cold
Medium
6 . Cycle finish
he machine stops and LED display shows “
T
with beeper sound.
❋ Do not work any button and stop the washer
(When the washer is operating) or (when a cycle is in
progress)
WARNING
• To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
”
www.groupdynamics-laundry.com
22 sales@groupdynamics.lv
PROGRAMMING MODE
PROGRAMMING MODE
:Y
ou can check machine information or change setting on “Program setup”, “collect information data”, ”Diagnostic test”.
How to enter "Programming mode"
You can enter programming mode only for Idle state and
pause state.
- Coin Type
1) Dissemble upper coin box key.
2) Take out the coin drop from the coin box.
3) Turn on/off the toggle switch at the back of the coin box.
4) Display will show “
”.
- OPL Type
1) Push the 90°C MEDICAL & 60°C NORMAL button at the
same time.
2) Push the 75°C HOT button 1 times.
3) Push the START button.
4) Display will show “
”.
How to use button
You can change Washer vend price, cycle time and Cycle
parameters, etc.
Press Button
Description
WHITES
Move to upper level or
Comes back to Idle State
COLORS
Move to the mode in the same level (+)
DELICATES
Move to the modes in the same level (-)
START
Enter the selected mode
Coin Box Key
Coin Vault
Openings : close
- Coin type -
- OPL type -
NOTE
• If you turn on the power without connecting meter case for the first time, the machine display “
”.
• When the machine is came out from the factory, it is set in the coin type. You can change Coin type by button.
(For more information refer to SETUP mode.)
www.groupdynamics-laundry.com
sales@groupdynamics.lv
PROGRAMMING MODE
Coin type
Algorithm flow chart shows how to control programming mode.
Before program set, check the structure of programming mode.
1. Turn on/off toggle switch(PUSH THE TWO KEY) or Insert service card, for entering set up mode.
2. Press Whites button to move to the upper level.
3. Press Colors(+) or Delicates(-) button if you want to be at the same level.
4. Press Start button to enter the details of Set up, Diagnostic Tests.
is to set price value, time value, and vend type etc.
consists of line test, reset, free cycle, and kill cycle.
Is to collect the usage data.
Structure of Programming mode
NOTE
• Do not use
,
.
• It is only used in inspecting the machine.
23
www.groupdynamics-laundry.com
24 sales@groupdynamics.lv
Programming Mode - setup mode
Setup Mode :
(display)
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
-C
oin type – Turn on/off toggle switch.
-P
ush “WHITES” + “DELICATES” and the ‘3’.
-T
hen, the washer displays
.
1. How to change regular price.
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the START button.
Display previous regular price.
Press COLORS(+) or DELICATES(-) button to set the regular price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the regular price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
2. How to change regular cold price.
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous regular cold price.
Press COLORS(+) or DELICATES(-) button to set the regular cold price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the regular cold price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
25
www.groupdynamics-laundry.com
26 sales@groupdynamics.lv
Programming Mode - setup mode
3. How to change regular hot price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous regular hot price.
Press COLORS(+) or DELICATES(-) button to set the regular hot price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the regular hot price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
4. How to change special price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous special price.
Press COLORS(+) or DELICATES(-) button to set a special price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the special price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type -Turn on/off toggle switch(PUSH THE TWO KEY).
27
www.groupdynamics-laundry.com
28 sales@groupdynamics.lv
Programming Mode - setup mode
5. How to change special cold price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous special cold price.
Press COLORS(+) or DELICATES(-) button to set the special cold price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the special cold price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
6. How to change special warm price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous special warm price.
Press COLORS(+) or DELICATES(-) button to set the special warm price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the special warm price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
29
www.groupdynamics-laundry.com
30 sales@groupdynamics.lv
Programming Mode - setup mode
7. How to change special hot price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous special hot price.
Press COLORS(+) or DELICATES(-) button to set the special hot price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the special hot price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
8. How to change add super wash price
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous add super wash price.
Press COLORS(+) or DELICATES(-) button to set add super wash price.
(The vend price can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the add super wash price, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
31
www.groupdynamics-laundry.com
32 sales@groupdynamics.lv
Programming Mode - setup mode
9. How to change add super wash type
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous add super wash type.
Press COLORS or DELICATES button and then select the add super wash type you
want.
Wash time increase.
Both (Wash time increase and rinsing once more.)
Rinsing once more.
Press the START button.
The machine sets up the add super wash type, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
10. How to enter the
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
Structure of
appears in the display.
Content of
• Special price days apply or not
• Disabled
• Add super wash apply or not
• Select vend type
• This function is not available
• Pre-wash apply or not
• Top off apply or not (only for dryer)
• Disable
• Enable
33
www.groupdynamics-laundry.com
34 sales@groupdynamics.lv
Programming Mode - setup mode
10-1. Special price day setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display
.
Press the START button.
Press COLORS or DELICATES button and then select
or
.
Disable
Enable
Press the START button.
The machine sets up the special price day, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
One or the other will
display.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
10-2. Add super wash setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display
.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press COLORS or DELICATES button and then select
or
.
Disable
Enable
Press the START button.
The machine sets up the add super wash application, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
One or the other will
display.
35
www.groupdynamics-laundry.com
36 sales@groupdynamics.lv
Programming Mode - setup mode
10-3. Vend type setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display
.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press COLORS or DELICATES button and then select
or
.
One or the other will
display.
Coin type
Card type
(Don’t set up vend type to card. If you don’t have card
reader, machine cann’t back to coin type.)
Press the START button.
The machine sets up the vend type, then advances to the next process
automatically.
1.Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
• After setting the Value to VEND, vend type is changed directly without power on/off
in washer
(Sense dry) is not available
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
10-4. Pre-wash set up
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display
.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press COLORS or DELICATES button and then select
or
.
Disable
Enable
Press the START button.
The machine sets up the special price day.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
•
(top off) is not available in washer (Only for dryer)
One or the other will
display.
37
www.groupdynamics-laundry.com
38 sales@groupdynamics.lv
Programming Mode - setup mode
11. How to enter the special price day
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
Press the START button.
Display
.
Structure of
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
appears in the display.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
11-1. How to change to Sunday
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display
.
Press the START button.
Press COLORS or DELICATES button and then select
or
.
Disable
Enable
Press the START button.
The machine sets up the special price day (Sunday), then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
• As explained on the previous page, similarly, other days can be set up by the same method.
One or the other will
display.
39
www.groupdynamics-laundry.com
40 sales@groupdynamics.lv
Programming Mode - setup mode
12. Special price beginning time setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous special price beginning time.
Press COLORS(+) or DELICATES(-) button to select time between 0 and 23.
Press the START button.
The machine sets up the special price beginning time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
13. Special price ending time setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous Special Price ending time.
Press COLORS(+) or DELICATES(-) button to select time between 1 and 24.
Press the START button.
The machine sets up the special price ending time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
•
(regular priced dryer cycle time) is not available in washer.
•
(special priced dryer cycle time) is not available in washer.
NOTE
• When setting up a special price period, the ending time must be later than the beginning time.
41
www.groupdynamics-laundry.com
42 sales@groupdynamics.lv
Programming Mode - setup mode
14. Washing time set up
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous wash time.
Press COLORS(+) or DELICATES(-) button to select wash time.
(Maximum 15 minutes, Minimum 5 minutes.)
Press the START button.
The machine sets up the wash time, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
15. Rinsing times per cycle
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous rinsing times per cycle.
Press COLORS(+) or DELICATES(-) button to select rinsing times per cycle.
(Max 5, Min 1)
Press the START button.
The machine sets up the rinsing times per cycle, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
43
www.groupdynamics-laundry.com
44 sales@groupdynamics.lv
Programming Mode - setup mode
16. Rinsing time setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous rinsing time.
Press COLORS(+) or DELICATES(-) button to select rinse cycle.
(Max 15min, Min 8min)
Press the START button.
The machine sets up the rinsing time, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
17. Top spin speed – final spin time depends on RPM
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous top spin speed.
Press COLORS(+) or DELICATES(-) button to select top spin speed. (0~3)
Press the START button.
The machine sets up the top spin speed, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
NOTE
• Top spin speed
0: 1150 rpm
1: 1150 rpm
2: 800 rpm
3: 700 rpm
• If you select 800 or below, the final spin time will be reduced by 9minutes
• If you select 1150 rpm, the final spin time is fixed by 13 minutes
45
www.groupdynamics-laundry.com
46 sales@groupdynamics.lv
Programming Mode - setup mode
18. Value of coin 1
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous coin 1 value.
Press COLORS(+) or DELICATES(-) button to select value of coin 1
(The value can be set fronm 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the value of coin 1, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
19. Value of coin 2
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous Coin 2 value.
Press COLORS(+) or DELICATES(-) button to select value of coin 2.
(The value can be set from 0~9.90 in 0.1£ increments.)
Press the START button.
The machine sets up the value of Coin 2, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
• Coin 2 is available for E-suds system
47
www.groupdynamics-laundry.com
48 sales@groupdynamics.lv
Programming Mode - setup mode
20. Penny increment pricing offset
This represents the cent increment price offset used when debit card is setup.
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous penny increment pricing offset.
Press COLORS(+) or DELICATES(-) button to select value of PIPo. (0~4)
Press the START button.
The machine sets up the value of PIPo, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
NOTE
• Penny Increment Pricing Offset is available only in card type.
(It hasn’t affected on the coin type’s price setting.)
(top off time) is not available in washer.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
21. How to change the water level
You can change the water level by selecting two options.
1. LO indicate water level 23.7 [KHz]
2. HI indicate water level 23.5 [KHz]
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
One or the other will
display.
Press the START button.
Press COLORS(+) or DELICATES(-) button and then select
or
23.7 [KHz]
23.5 [KHz]
Press the START button.
The machine sets up the value of water level, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
NOTE
• This function is only controlled in machine.
(It is not applied in setup card.)
49
www.groupdynamics-laundry.com
50 sales@groupdynamics.lv
Programming Mode - setup mode
22. Beep volume
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous value.
Press COLORS(+) or DELICATES(-) button to select
High or Low or Off.
Press the START button.
The machine sets up the beep volume, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
23. Time to keep the coin (Use only for coin type)
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous value.
Press COLORS(+) or DELICATES(-) button to select button to select time between
1 ~ 180 or ‘Disable’.
Press the START button.
The machine sets up the time to keep the coin, then advancesto the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch(PUSH THE TWO KEY).
51
www.groupdynamics-laundry.com
52 sales@groupdynamics.lv
Programming Mode - setup mode
24. Product type setup
Button
Entering set up mode.
You will see LqC1
Display
Press the WHITES button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Press the COLORS or the DELICATES button until
appears in the display.
Press the START button.
Display previous value.
Press COLORS or DELICATES button and then select
or
.
Coin type setting
OPL type setting
Press the START button.
The machine sets up the time to keep the coin, then advances
to the next process automatically.
1.Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
One or the other will
display.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - Test mode
Programming Mode - Test mode
Diagnostic tests:
(display)
This program has been added for testing the washer and detecting errors.
Entering the test mode
Data Name
Button
Entering
the test mode
1. Entering programming mode
Turn on/off toggle switch.
2. Whites
Press the whites button. Then
3. Start
Enter the diagnostic test mode.
Display
Description
appears in the display.
1.
According to pressing START button, test move to the next step.
Number of times the
START button is pressed
Check Point
Display
None
1time
Turns on all lamps and locks the door
Displayed gH XX and bt XX alternately (Version)
2 times
Tumble Clockwise.
rpm (40~50)
3 times
Low Speed Spin
rpm (600)
4 times
High Speed Spin
rpm (1000~1150)
5 times
Inlet valve for main water turns on.
Water level frequency (261~)
6 times
Inlet valve for hot wash turns on.
Water level frequency (261~)
7 times
Inlet valve for softener turns on.
Water level frequency (261~)
8 times
Inlet valve for bleach turns on.
Water level frequency (261~)
9 times
Tumble counter clockwise.
rpm (40~50)
10 times
Drain Pump turns on.
Water level frequency (261~)
Turn on Circulation Pump.
Displayed 0XX
12 times
Turns on all lamps.
Displayed gH XX and bt XX alternately
13 times
Button Checks.
Displayed gH XX and bt XX alternately
14 times
High Speed Spin
rpm(1150)
11 times (*)
15 times
PDA Signal Check
this function is not applied in this machine
16 times
NOTE
• Make sure the drum is empty when a diagnostic test is performed. Do not use
• * This machine do not use circulation system.
.
53
www.groupdynamics-laundry.com
54 sales@groupdynamics.lv
Programming Mode - Test mode
2. Factory reset After factory reset, machine information is changed to the default value.
Button
Entering set up mode.
You will see LqC1
Press the COLORS or the DELICATES button until
Display
appears in the display.
Press the START button.
Press the COLORS button until
appears in the display.
Press the START button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type – Turn on/off toggle switch(PUSH THE TWO KEY).
– Push “WHITES” + “DELICATES” and the ‘3’.
NOTE
• Washing time
• Rinse cycle
• Top spin speed
• Add SUPER WASH
10 minutes
twice
1,150 RPM
3 minutes extra wash and one extra rinse
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - Test mode
3. Time set up
Button
Entering set up mode.
You will see LqC1
Press the COLORS or the DELICATES button until
Display
appears in the display.
Press the START button.
The display will cycle through 2000 --> 0101 --> Sat --> 0000 repeatedly.
Press the START button.
Press COLORS(+) or DELICATES(-) button to select year between 2000 and 2099.
Press the START button.
The machine sets up the year, then advances to the next process automatically.
Press COLORS(+) or DELICATES(-) button to select a month between 01 and 12.
Press the START button.
The machine sets up the month, then advances to the next process automatically.
Press COLORS(+) or DELICATES(-) button to select the day between 01 and 31.
Press the START button.
The machine sets up the day, then advances to the next process automatically.
Press COLORS(+) or DELICATES(-) button to select the hour between 00 and 23.
Press the START button.
The machine sets up the hour, then advances to the next process automatically.
Press COLORS(+) or DELICATES(-) button to select minute between 00 and 59.
Press the START button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
55
www.groupdynamics-laundry.com
56 sales@groupdynamics.lv
Programming Mode - Test mode
4. Courtesy cycle
A courtesy cycle is like a complimentary cycle given to the customer when the washer goes out of order after the
customer has made the payment to wash clothes.
Button
Entering set up mode.
You will see LqC1
Press the COLORS or the DELICATES button until
Display
appears in the display.
Press the START button.
Press the COLORS button until
Press the START button.
Display will show
appears in the display.
.
Select the cycle you desire.
❋ Default WHITES course selected.
Press the START button.
Display will show the remaining time and start.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - Test mode
5. Cycle Kill
Coin type
Button
Entering set up mode.
You will see LqC1
Press the COLORS or the DELICATES button until
Display
appears in the display.
Press the START button.
Press the COLORS button until
appears in the display.
Press the START button.
Start drain and display spin time.
Display
with beeping.
Go back to ready mode.
NOTE
• You can kill the cycle in the middle of cycle by using KILL function.
Display spin time
57
www.groupdynamics-laundry.com
58 sales@groupdynamics.lv
Programming Mode - Collect mode
Programming Mode - Collect mode
Collect information data :
(display)
The washer collects the usage data so that the owner can check various information like number of various cycles used, how
many times card or coins used, etc.
Entering the collect mode
Data Name
Entering
the collect
mode
Button
Display
Description
1. Entering the programming
mode.
Turn on/off toggle switch.
2. WHITES
Press the WHITES button until
3.COLORS(+), DELICATES(-)
Press the COLORS(+), DELICATES(-) button until
in the display.
4. START
Enter the Collect information data.
appears in the display.
appears
5. COLORS(+), DELICATES(-)
xxxx
Move to each data list that you want to check by pressing with
COLORS (+) or DELICATES (-) button.
6. START
xxxx
Display the value of selected data list
7. WHITES
Move to upper level or Comes back to Idle State
❖ Check the collect information reference to the follow lists. The Lists are displayed by abbreviations.
Collect Mode Data lists
No.
Abbreviation
1
rgPr
2
Meaning
Description
Regular Price
0.00 ~ 9.90
rgCP
Regular Cold Price
0.00 ~ 9.90
3
rgrP
Regular Warm Price
0.00 ~ 9.90
4
rgHP
Regular Hot Price
0.00 ~ 9.90
5
dELC
Dryer Moisture Sense
0: disable
6
ItrC
Interval Regular Cycles
Number of Regular cycles ( 0~65535 )
7
ItCC
Interval Regular Cold Cycles (DELICATES )
Number of Regular Cold cycles ( 0~65535 )
8
ItAC
Interval Regular Warm Cycles (COLORS , PERM. PRESS )
Number of Regular Warm cycles ( 0~65535 )
9
ItHC
Interval Regular Hot Cycles (Whites)
Number of Regular Hot cycles ( 0~65535 )
10
ItSC
Interval Super Cycles
Number of Super cycles ( 0~65535 ) ( Washer Only)
11
IttF
Interval Topoff Cycles
Number of Topoff cycles ( 0~65535 ) (Dryer Only)
12
ItUC
Interval Service Cycles
Number of Service cycles (0~65535)
13
ItFC
Interval Token Cycles
Number of Token cycles (0~65535)
14
ACrC
Accumulated Regular Cycles
Number of Regular cycles ( 0~65535 )
15
ACCC
Accumulated Regular Cold Cycles (DELICATES )
Number of Regular Cold cycles ( 0~65535 )
1: enable
www.groupdynamics-laundry.com
sales@groupdynamics.lv
PROGRAMMING MODE
OPL type
Algorithm flow chart shows how to control programming mode.
Before program set, check the structure of programming mode.
The method of entering set up mode.
1) Push the 90°C MEDICAL & 60°C NORMAL button at the same time.
2) Push the 75°C HOT button 1 times.
3) Push the START button.
4) Display will show “
”.
is to set price value, time value, and vend type etc.
consists of line test, reset, free cycle, and kill cycle.
Structure of Programming mode
NOTE
• Do not use
,
.
• It is only used in inspecting the machine.
Programming Mode
59
www.groupdynamics-laundry.com
60 sales@groupdynamics.lv
Programming Mode - setup mode
Setup Mode :
(display)
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
OPL Type
1) Push the 90°C MEDICAL & 60°C NORMAL button at the same time.
2) Push the 75°C HOT button 1 times.
3) Push the START button.
-T
hen, the washer displays
.
1. How to enter the
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
Structure of
appears in the
Content of
• Special price days apply or not
• Disabled
• Add super wash apply or not
• Select vend type
• This function is not available
• Pre-wash apply or not
• Top off apply or not (only for dryer)
• Disable
• Enable
NOTE
• In case of OPL type, (Pre-wash) is only available
in
.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
1-1. Pre-wash set up
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display
.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press 75°C HOT or 60°C NORMAL button and then select
or
.
Disable
Enable
Press the START button.
The machine sets up the special price day.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
NOTE
•
(top off) is not available in washer (Only for dryer)
One or the other will
display.
61
www.groupdynamics-laundry.com
62 sales@groupdynamics.lv
Programming Mode - setup mode
2. Rinsing times per cycle
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display previous rinsing times per cycle.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select rinsing times per cycle.
(Max 5, Min 1)
Press the START button.
The machine sets up the rinsing times per cycle, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
3. Rinsing time setup
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display previous rinsing time.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select rinse cycle.
(Max 15min, Min 8min)
Press the START button.
The machine sets up the rinsing time, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
63
www.groupdynamics-laundry.com
64 sales@groupdynamics.lv
Programming Mode - setup mode
4. Top spin speed – final spin time depends on RPM
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display previous top spin speed.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select top spin speed. (0~3)
Press the START button.
The machine sets up the top spin speed, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
NOTE
• Top spin speed
0: 1150 rpm
1: 1000 rpm
2: 800 rpm
3: 600 rpm
• If you select 800, the final spin time will be reduced by 9minutes
• If you select 1150 rpm, the final spin time is fixed by 11 minutes
• If you select 600, the final spin time will be reduced by 7 minutes
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
5. How to change the water level
You can change the water level by selecting two options.
1. LO indicate water level 23,7 [KHz]
2. HI indicate water level 23,5 [KHz]
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
One or the other will
display.
Press the START button.
Press 75°C HOT(+) or 60°C NORMAL(-) button and then select
,
,
23,7 [KHz]
MIDDLE : 22,8 KHz -> 23,7 KHz (default)
22,8 KHz -> 23,5 KHz
Press the START button.
The machine sets up the value of water level, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
NOTE
• This function is only controlled in machine.
(It is not applied in setup card.)
65
www.groupdynamics-laundry.com
66 sales@groupdynamics.lv
Programming Mode - setup mode
6. Beep volume
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display previous value.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select
High or Low or Off.
Press the START button.
The machine sets up the beep volume, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - setup mode
7. Time to keep the coin (Use only for coin type)
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Display previous value.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select button to select time
between 1 ~ 180 or ‘Disable’.
Press the START button.
The machine sets up the time to keep the coin, then advancesto the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
67
www.groupdynamics-laundry.com
68 sales@groupdynamics.lv
Programming Mode - setup mode
8. How to enter the
Button
Entering set up mode.
You will see LqC1
Display
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
appears in the
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
Structure of
appears in the
Content of
• Product type
• Currency choice
0 EUK (England)
1 EAP (Australia)
2 ELC (USA)
• PDA type
• Card reader type
3 EPN (China)
4 KOR (Korea)
• Coin drop type
5 EJP (Japan)
6 ECI (Canada)
0 (Pharos)
1 (HP)
0 (ESD)
1 (Greenwald)
0 (ESD)
1 (Greenwald)
2 (Munzprufer)
NOTE
• Pay means card or coin type.
• Default type is coin type.
If you want to change coin type to card type, you need to setup vend type in "fea1". (refer to "FEA1" function)
• Free means opl type.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - test mode
Programming Mode - Test mode
Diagnostic tests:
(display)
This program has been added for testing the washer and detecting errors.
Entering the test mode
Data Name
Button
Entering
the test mode
1. Entering programming mode
Display
Description
Turn on/off toggle switch.
Press the 90°C MEDICAL button. Then
2. 90°C MEDICAL
appears in the
display.
3. Start
Enter the diagnostic test mode.
1.
According to pressing START button, test move to the next step.
Number of times the
START button is pressed
Check Point
Display
None
1time
Turns on all lamps and locks the door
Displayed 1U XX, 1g XX and 1O XX alternately (Version)
2 times
Tumble Clockwise.
rpm (42~50)
3 times
Low Speed Spin
rpm (550~650)
4 times
High Speed Spin
rpm (1000~1150)
5 times
Inlet valve for main water turns on.
Water level frequency (26,2~23,0 kHz)
6 times
Inlet valve for hot water turns on.
Water level frequency (26,2~23,0 kHz)
7 times
Inlet valve for softener turns on.
Water level frequency (26,2~23,0 kHz)
8 times
Inlet valve for bleach turns on.
Water level frequency (26,2~23,0 kHz)
9 times
Tumble counter clockwise.
rpm (42~50)
10 times
Turn on the heater
Displayed XX
11 times
Drain Pump turns on.
Water level frequency (26,2~23,0 kHz)
12 times
Turns on all lamps.
Displayed 1U XX, 1g XX and 1O XX alternately
13 times
Button Checks.
Displayed 1U XX, 1g XX and 1O XX alternately
14 times
High Speed Spin
rpm (1000~1150)
15 times
PDA Signal Check
this function is not applied in this machine
16 times
NOTE
• Make sure the drum is empty when a diagnostic test is performed. Do not use
.
69
www.groupdynamics-laundry.com
70 sales@groupdynamics.lv
Programming Mode - test mode
2. Time set up
Entering set up mode.
You will see LqC1
Button
Press the 75°C HOT or the 60°C NORMAL button until
display.
Display
appears in the
Press the START button.
The display will cycle through 2000 --> 0101 --> Sat --> 0000 repeatedly.
Press the START button.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select year between 2000 and
2099.
Press the START button.
The machine sets up the year, then advances to the next process automatically.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select a month between 01 and
12.
Press the START button.
The machine sets up the month, then advances to the next process automatically.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select the day between 01 and
31.
Press the START button.
The machine sets up the day, then advances to the next process automatically.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select the hour between 00 and
23.
Press the START button.
The machine sets up the hour, then advances to the next process automatically.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select minute between 00 and
59.
Press the START button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - test mode
3. Cycle Kill
OPL type
Entering set up mode.
You will see LqC1
Button
Press the 75°C HOT or the 60°C NORMAL button until
display.
Display
appears in the
Press the START button.
Press the 75°C HOT button until
appears in the display.
Press the START button.
Start drain and display spin time.
Display
with beeping.
Go back to ready mode.
NOTE
• You can kill the cycle in the middle of cycle by using KILL function.
Display spin time
71
www.groupdynamics-laundry.com
72 sales@groupdynamics.lv
Programming Mode - test mode
4. PASSWORD How to change the password.
Entering set up mode.
You will see LqC1
Button
Press the 75°C HOT or the 60°C NORMAL button until
display.
Display
appears in the
Press the START button.
Press the 75°C HOT button until
appears in the display.
Set up the number you want
By pressing 75°C HOT or the 60°C NORMAL button.
For example, If you want to change password number to No5
Press the 75°C HOT button until “
" appears in the display.
Press the START button, then Password change is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
NOTE
• Default password is 1.
If you want to change the password, you should know the present password.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Programming Mode - test mode
5. TUB CLEAN To clean up the tub, please run the TUB CLEAN cycle.
Entering set up mode.
You will see LqC1
Button
Press the 75°C HOT or the 60°C NORMAL button until
display.
Press the START button.
Press the 75°C HOT button until
appears in the display.
Press the START button, then tub clean reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
Display
appears in the
73
www.groupdynamics-laundry.com
74 sales@groupdynamics.lv
MAINTENANCE
MAINTENANCE
Care after wash
After the cycle is finished, wipe the door and the inside of
the door seal to remove any moisture. Leave the door open
to dry the washer tub interior. Wipe the body of the washing
machine with a dry cloth to remove any moisture
Cleaning the Dispenser
1. T
he dispenser should be cleaned periodically to remove
buildup from detergent and other laundry products.
WARNING
• Unplug the washer before cleaning to avoid the risk of
electric shock. Failure to follow this warning can cause
serious injury,fire, electric shock or death.
• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
• Do not use volatile substances (benzene, paint thinner, alcohol, acetone, etc.) or detergents with strong
chemical components when cleaning the washing
machine. Doing so may cause discoloration or damage
to the machine, or it may cause a fire.
Storing the Washer
If the washer will not be used for an extended period of
time and is in an area that could be exposed to freezing
temperatures:
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water
from hoses.
3. Plug the power cord into a properly grounded electrical
outlet.
4. Add 1 gallon of nontoxic recreational vehicle (RV)
antifreeze to the empty wash drum. Close door.
5. Select the spin cycle and let washer spin for 1 minute to
drain out all the water.
6. Unplug the power cord, dry the drum interior with a soft
cloth, and close the door.
7. Remove the inserts from the dispenser. Drain any water
in compartments and dry the compartments.
8. Store the washer in an upright position.
9. To remove the antifreeze from the washer after storage,
run washer through a complete cycle using detergent.
Do not add laundry!
NOTE
• Not all of the RV antifreeze will be expelled.
• Weekly cleaning of the detergent dispenser will ensure
problem free operation.
①
②
②
2. R
emove the inserts from the drawer, and clean them
with warm water and a soft cloth or brush to remove any
residue or buildup.
Wipe out the inside of the drawer opening with a damp
cloth. Reassemble the drawer and reinstall in the drawer
opening.
NOTE
• Do not use anything other than water to clean the
drawer, inserts, and drawer opening.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Cleaning the water inlet filters
Clean the water inlet filters periodically to prevent clogging.
Take extra care to clean the water inlet filters for areas using
hard water. Water may not be supplied if there are foreign
objects, such as rust, sand, or stones in the water inlet
filters.
1 P ull out the plug to turn off the washing machine.
MAINTENANCE
75
WARNING
• Unplug the power cord and turn off the faucets before
cleaning. Failure to do so may cause electric shock.
• Do not use the washing machine without the inlet filters. If you use the washing machine without the inlet
filters it will cause leaks and malfunction.
• If you use the washing machine in an area with hard
water, the inlet filter may clog due to lime buildup.
2 T urn off the faucets connected with the water inlets.
emove the water inlets.
3 R
NOTE
•
message will blink on the display when the water
pressure in the detergent drawer is weak or an inlet filter
is clogged with dirt. Clean the inlet filter.
4 P ull out the water inlet filter.
Inlet Filter
5 Remove foreign objects from the water filter inlet.
- Soak the water filter inlets in white vinegar or a lime
scale remover or use a toothbrush to remove foreign
objects and rinse thoroughly.
6 Press the water filter inlets back into place.
7 Reattach the water lines to the washing machine.
www.groupdynamics-laundry.com
76 sales@groupdynamics.lv
MAINTENANCE
Cleaning the drain pump filter
The washing machine fails to drain if the drain pump filter is
clogged. Periodically clean the drain filter to prevent clogging
with foreign objects.
1 P ull out the plug to turn off the washing machine.
2 Open the drain pump filter cover.
6 Recap the plug onto the drain hose and reattach the drain
hose.
7 Insert the drain pump filter.
nclip the drain hose and remove the plug from the drain
3 U
hose to drain the remaining water.
8 Close the drain pump filter cover.
4
Twist the pump filter counterclockwise to remove.
5 Clean the pump filter and opening.
WARNING
• Make sure to pull out the plug before cleaning. Failure
to do so may cause electric shock.
• Opening the drain filter will result in water overflowing
if there is water in the washer tub. Make sure to check
if the water is completely drained before opening the
drain filter.
• If you use the washing machine with the drain filter
reassembled incorrectly after cleaning it, or if you use
the machine without the filter, it may cause leaks or
malfunction of the washing machine.
NOTE
•
message will blink when the drain pump filter is
clogged with dirt. Clean the drain pump filter.
www.groupdynamics-laundry.com
sales@groupdynamics.lv
Clean the door seal
Clean the door seal once a month to prevent build-up of dirt
in the door seal.
1 Wear rubber gloves and protective goggles.
ilute 3/4 cup (177 ml) of liquid chlorine bleach in 1 gallon
2 D
(3.8 L) of water.
3 S oak a sponge or a soft cloth in this diluted solution and
wipe down all around the door seal.
ipe any moisture with a dry towel or cloth after cleaning.
4 W
5 L eave the door open to allow the door seal to dry
completely.
CAUTION
• Cleaning the door seal with an undiluted solution may
cause malfunction of the door seal and washing machine parts.
MAINTENANCE
77
www.groupdynamics-laundry.com
78 sales@groupdynamics.lv
ERROR MODE
ERROR MODE
Meaning of Error Codes that LED displays during occurrence of problem.
Problem
Possible Cause
Solution
•Water supply is not adequate in area.
•Water supply taps are not completely open.
• Water inlet hose is bent.
• The filter of the inlet hose clogged.
Check another tap in the house.
Fully open tap.
Straighten hose.
Check the filter of the inlet hose. • Drain hose is bent or clogged.
• The drain filter is clogged.
Clean and straighten the drain hose.
• Load is too small.
• Load is out of balance.
•The appliance has an imbalance detection and
correction system. If individual heavy articles
are loaded (bath mat, bath robe, etc.) and the
imbalance is too great, after several attempts to
restart the spin cycle the machine will stop and
the error code will be displayed.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper spinning.
• Is the door opened or not completely closed?
Close the door completely.
✽ If it will not open, call for service.
• The water overfills due to a faulty water valve.
Close the water tap.
Unplug the power plug.
Call for service.
Clean the drain filter.
• The water level sensor malfunction. • Overload in motor.
Restart the cycle after 30 minutes. If is not released, call for service.
• Disconnection of card reader wire.
Check the card reader wire.
• Too much detergent is used.
This is not an error.
Please wait until removed
• Heating error
The thermistor is out of order.
www.groupdynamics-laundry.com
Power Fail Recovery & Default washer Settings & SPECIFICATIONS 79
sales@groupdynamics.lv
Power Fail Recovery
In case of power failure, the machine stops running but the time display remains on, showing the time just before power
failure.
Default washer Settings
Default Settings
Default
Wash Time (Minutes)
10 Minutes
Rinse Time (Minutes)
16 Minutes
Spin Time (Minutes)
11 Minutes
Rinsing times
Twice
Top Spin speed
1150 rpm
SPECIFICATIONS
Model F1069FD*
Name
Front-loading Washing Machine
Power supply
220 -240 V~ 50 Hz
Size
686 mm (W) X 767 mm (D) X 983 mm (H), 129.1 cm (D with door open)
Weight
87 kg (190 lbs.)
Wash capacity
11 kg
Spin speed
1150 rpm max.
Permissible water pressure
1.0 – 8.0 kgf/cm2 (100 – 800 kPa)
NOTE
• Specifications subject to change by manufacturer.
www.groupdynamics-laundry.com
80 sales@groupdynamics.lv
MEMO
Memo
www.groupdynamics-laundry.com
sales@groupdynamics.lv