Professional Sound “Large sports venues, spacious religious facilities, boutique restaurants... TOA’s expertise and engineering competency offers you the optimal solution for your project.” "Sound, not equipment": TOA has held to this concept in its more than 80 years of crafting sound environments for spaces of all kinds. TOA is an experienced player in the professional sound Power Amplifiers Speakers TOA Professional Sound nothing less than the best in sound quality will do. How sound is rendered is everything. A sound system brings to sporting events that feeling of being immersed in the moment and action, infuses concerts with that uplifting sense of togetherness and, in a place or worship, creates an embracing Mixer Power Amplifiers sector, Voice Evac in particular—a sector where atmosphere where every word is brought home to those gathered there, enhancing the devotional relaxed, carefree tone a commercial setting requires, encouraging conversation with and between guests and customers. Mixers / DSP experience. A sound system can also set the for the tens of thousands, leave it to TOA to craft just the right soundspace. CONTENTS Speakers..............................................................................03 Power Amplifiers.................................................................33 Wired Microphones restaurants, for halls, places of worship, or stadiums Wireless Microphone Systems Whether for smaller venues like cafes and Wireless Microphone Systems............................................51 Wired Microphones..............................................................61 MeetingIO Series.................................................................63 INDEX...................................................................................65 01 02 INDEX Mixers / DSP........................................................................37 MeetingIO Series Mixer Power Amplifiers.......................................................35 Speakers Line Array / Modular Type / Type A & Type C Common Features : Powerful 2-way modular speaker offers multiple configuration and installation options. • Phase wave front control technology for high-frequency sound range that is attenuation-free and high fidelity • Adjustable sound coverage by connecting a number of speakers and combining speakers with different dispersion angle • Simple maintenance – complete driver replacement is possible from the speaker’s rear • Splash-proof version (IPX4) available Line Array Type A and Type C feature TOA proprietary “Sync-Drive” wave guide technology, to provide a uniform, high Mixer Power Amplifiers Power Amplifiers • Powerful 2-way modular speaker units Type A Features Type C Features • High power handling – High: 450W, Low: 180W • Single or bi-amp mode • Subwoofer with 40 cm (18”) cone speaker • Compact and high power handling – 360W (single-amp mode) / Mixer Power Amplifiers Speakers Power Amplifiers Speakers frequency sound field offering excellent sound clarity and minimal interference. High: 360W, Low: 180W (bi-amp mode) • Subwoofer with 38 cm (15”) cone speaker HF Driver SR-A12L/A12LWP SR-A18B Mixers / DSP 540 400 5˚ 360 Input section Wireless Microphone Systems Wireless Microphone Systems 469 HF Horn 698 Left side view Left side view Input section Front view Front view HF Horn SR-C8L/C8LWP HF Driver 526.6 470 SR-C8LWP HF Driver SR-C8L/C8LWP Left side view Front view 526.6 470 SR-A12S/A12SWP Sectional view of high frequency reproduction part 296 *Shown construction is Type A. SR-C8L SR-A12S 5° 716 Both Type A and Type C include one speaker 259.6 293 740 SR-C8LWP MeetingIO Series Rear view Sound coverage options Wired Microphones 5° 259.6 293 296 SR-C8L HF Wave-front Control Throat Wired Microphones 433 716 573 Mixers / DSP SR-A12L LF Driver 716 740 SR-A12LWP greater short range coverage. Both configurations Rear view Left side view Front view 467 may be combined as required to achieve uniform sound coverage in various environments. 399 a 15-degree taper configuration which provides 433 SR-A12SWP designed to transmit sound over distance as well as 15˚ configuration with a 5-degree taper specifically 282 MeetingIO Series 740 HF Driver Input section Left side view Front view SR-A18B 294 SR-A12S 526.6 470 03 740 716 04 INDEX SR-C8S SR-A12L 8 INDEX SR-C8S/C8SWP 526.6 296 470 Left side view Input section Input section Front view Input section Left side view Speakers Left side view Input section Front View Power Amplifiers 259.6 293 5° 293 258.8 Left Side View SR-C8LWP Front view Mixer Power Amplifiers 698 SR-C8SWP 470 SR-C8L 540 15° 573 399 433 15˚ 400 433 5˚ 360 SR-C8S 296 470 294 Front view SR-C8S/C8SWP SR-A12SWP Low frequency: 98 dB High frequency: 110 dB Low frequency: 98 dB High frequency: 109 dB 125dB (Low)/ 133dB (High) 125dB (Low)/ 132dB (High) 50 Hz – 20 kHz Low: 12" cone-type High: Wave front control horn with compression driver x 2 Low: 12" cone-type High: Wave front control horn with compression driver x 2 740 Color Black Black 740 × 433 × 469 mm 740 × 433 × 467 mm 716 Dimensions (W x H x D) Sensitivity (1 W, 1 m) 16 Ω (single-amp mode), low frequency: 16 Ω, high frequency: 16 Ω (bi-amp mode) 98 dB (single-amp mode); low: 95 dB; high: 110 dB (bi-amp mode) 526.6 Max SPL (Rated input,550 1m) 124dB 470 (Low)/ 132dB (High) Frequency ResponseLeft Side View SR-15BInput section Directivity Angle 121dB (Low)/ 133dB (High) 65 Hz – 20 kHz (when equalized at recommended parameters) Front View Horizontal: 110°, vertical: 15° Speaker Component Horizontal: 110°, vertical: 5° Low frequency: 20 cm cone-type / High frequency: Wave-front control horn + compression drivers × 2 Color Black SR-15BWP Dimensions (W x H x D) 526.6 × 293 × 294 mm 526.6 × 293 × 296 mm 526.6 470 294 399 433 Black SR-C8S/C8SWP SR-C8S 15˚ Left Side View Front View SR-C8SWP 467 Left side view Front view 15° 282 Rated Impedance SR-C8SWP Input section Input section SR-C8LWP Wireless Microphone Systems SR-A12S Horizontal: 90°, Vertical: 15° SR-C8L 293 Speaker Component Horizontal: 90°, Vertical: 5° SR-C8SWP Continuous program: 360 W (single-amp mode) / low frequency: 360 W, high frequency: 180 W (bi-amp mode) 258.8 Directivity Angle 470 SR-C8S Power Handling Capacity Continuous program: Low frequency: 450 W, High frequency: 180 W Frequency Response SR-C8S Specifications Mixers / DSP SR-A12S 258.8 SR-A12LWP 594.8 SR-A12L 294 293 data Specifications SR-A12SWP 526.6 EASE data 540 EASE Max SPL (Rated input, 1m) Mixers / DSP SR-A12SWP 467 Sensitivity (1 W, 1 m) Wireless Microphone Systems 740 716 Front view 526.6 526.6 SR-A12S 469 Left side view SR-C8L/C8LWP 740 SR-C8S/C8SWP 716 716 Input section Front view SR-A18B 740 SR-A12L Left side view Input section SR-A12S/A12SWP Power Handling Capacity SWP Line Array / Modular Type / Type C 15° Mixer Power Amplifiers Power Amplifiers 2L/A12LWP 259.6 293 SR-C8LWP Line Array / Modular Type / Type A SR-A12LWP 5° Speakers 282 Speakers SR-C8L 526.6 550 740 716 470 Input section SR-15B Left Side View Front View SR-CL8 Cluster Bracket Accessories 698 Left side view Input section Front view Left Side View Front View SR-RF12 Rigging Frame 526.6 550 EASE SR-C15B SR-C15BWP SR-A18B Power Handling Capacity Continuous program: 720 W Sensitivity (1 W, 1 m) 95 dB Max SPL (Rated input, 1m) 124dB Sensitivity (1 W, 1 m) 93 dB Frequency Response 40 – 400 Hz Max SPL (Rated input, 1m) 120dB Speaker Component 46 cm cone-type Frequency Response 40 – 400 Hz (when equalized at recommended parameters) Speaker Component 46 cm cone-type Speaker Component 38 cm cone-type Color Black Dimensions (W x H x D) 740 x 573 x 698 mm 05 SR-RF12WP Rigging Frame SR-TP12 Tilt Joint Plate Power Handling Capacity Rated Impedance Color Dimensions (W x H x D) Continuous program: 450 W 8 Ω Black SR-SB8 Rigging Support Bracket SR-15BWP Input section Left Side View Front View SR-TP8 Tilt Joint Bracket 526.6 × 594.8 × 550 mm 06 INDEX Specifications Specifications MeetingIO Series data 594.8 MeetingIO Series INDEX SR-15B EASE data SR-RF8/RFWP 470 Rigging Frame 540 Input section Wired Microphones 594.8 540 SR-15BWP 540 573 Wired Microphones Accessories Speakers Line Array / Variable Dispersion Array Speaker / HX-7 & HX-5 Powerful & Compact variable dispersion line array with flexible installation options. • Variable dispersion line array with SYNC-Drive wave guide technology • Power handling: 750W Continuous [email protected] ohms • One module is composed of 2 x 5.5” LF speakers and waveguide Thanks to its award-winning enclosure design, employing four modules per unit, the HX Series allows precise adjustment loaded 1” HF compression driver • Built-in isophasic wave-front control horn ensures precise HF control and superior reproduction of HF sounds of sound dispersion angles. The series offers pristine clarity in a wide range of applications from sports venues, auditoriums, concert halls and Mixer Power Amplifiers Power Amplifiers HX-7 Features challenging houses of worship. With the HX Series you’re getting affordable quality and stellar performance. • Adjustable dispersion angle 0, 15, 30, 45 and 60° (60° requires optional HY-60D) • 0° mode facilitates the most effective line array set-up. • Easily adjustable vertical dispersion angle Mixer Power Amplifiers Speakers Power Amplifiers Speakers • Maximum four speaker units can be stacked • Splash-proof version (IPX4) available Accurate directivity control Versatile mounting options HX Series configuration allows the variable directivity control and low-frequency dispersion control comparable to using a large constant-directivity horn speaker. Hanging vertically On the wall On the ceiling with subwoofer Mixers / DSP Directivity changeable speaker Adjustable Dispersion Advantage of multi-unit configuration Wireless Microphone Systems Wireless Microphone Systems Mixers / DSP Large-scale CD horn HX-5 Features HX-7 • More compact and affordable choice • Power handling: 600W Continuous [email protected] ohms • One module is composed of 1 x 4.72” cone-type LF driver and 3 x 1” balanced dome tweeters MeetingIO Series *Make sure that 3 or 4-stacked HX units are suspended from 3 or more hanging points. Wired Microphones 45º • Maximum four speaker units can be stacked • Splash-proof version (IPX4) available Wider coverage MeetingIO Series 0º • Adjustable dispersion angle 15, 30, 45 and 60° HX-5 Four Stages 15º 07 angle of beam spread 15º,30º,45º,60º 60º 08 INDEX Wired Microphones Adjustable dispersion angle 0,15,30,45 and 60 degrees Controlled dispersion INDEX Maximum four speaker units can be stacked. Five Stages 497 408 342 274 • HX-5B/5W • HX-7B/7W Input section Input Section • HX-7B-WP/7W-WP Input section • HX-7B/7W Input section • HX-5B-WP/5W-WP • HX-7B-WP/7W-WP Input section Input Section Front Speaker cable Attach the supplied (60 cm long) terminal cover. Side Front Side Side EASE FB-120B/W EASE data Bass-reflex type HX-7W HX-7B-WP HX-5 408 75 Hz – 20 kHz 408 342 105 Hz – 20 kHz • HX-5B/5W Input Section • HX-5B-WP/5W-WP Input Section 310on 408 70 Horizontal: 100°, Vertical: Depending directivity angle mode Water Protection Finish Dimensions (W x H x D) 4-M8* Crossover Frequency Directivity Angle 4kHz Screw terminals Horizontal: 100° (over 2 kHz), Vertical: 60° (over 800 Hz), 45° (over 1.2 kHz), 30° (over 1.6 kHz), 15° (over 3.2 kHz) variable Speaker Component Input Terminal Low frequency: 12 cm cone-type x 4, High frequency: Balanced dome-type x 12 Speaker Cord Water Protection FB-150B/W Front (60 cm long) NL4MP connector - Finish 2-core cabtyre cord with diameter of 6 mm Side - IP X4 (Install with every speaker module downward) Enclosure: Polypropylene, black or white / Punched net: Surface-treated steel plate, black or white Dimensions (W x H x D) Screw M8 x 25 (8 positions) FB-120B/W - Speaker cable Speakon NL4MP x 2 and M4 screw terminal Speakon 408 x 546 x 342 mm Weight 30 kg Weight 8 Ω 310 408 70 342 (-10 dB) 70 Hz – 20 kHz (60° mode) 95 Hz – 20 kHz (-10 dB) (60° mode) 75 Hz – 20 kHz (-10 dB) (45° mode) 100 Hz 4-M8* – 20 kHz (-10 dB) (45° mode) 450 80 Hz – 20 kHz (-10 dB) (30° mode) 105 Hz – 20 kHz (-10 dB) (30° mode) Rear view Front (15° View mode) • HX-5B/5W Input Section Side view 110 Hz • HX-5B-WP/5W-WP Input(15° Section 85 Hz – 20 kHz (-10 dB) – 20 kHz (-10 dB) mode) 408 Frequency Response Low frequency: 13 cm450 cone-type x8 Screw terminals High frequency: Wave front control horn with compression driver x 4 Rear view Front View Side view Speakon NL4MP x 2 and M4 screw terminal, M4 screw terminal, distance between barriers: 9 mm (0.35”) distance between barriers: 9 mm (0.35”) IPX4 (Install with every speaker module tilted downward Speaker cable from Speakon (60 cm long) the horizontal.) NL4MP connector Enclosure: Polypropylene, black or white (HX-7B/W) Enclosure: Polypropylene, black or white (HX-7B/W-WP), PunPunched net: Surface-treated steel plate, black or white ched net: Surface-treated steel plate, black & white (HX-7B/WFront (HX-7B/W), paint / Hanging bracket: Side Steel plate, t3.0, black or WP), rust proof coating white (HX-7B/W), paint FB-150B/W 497 x 664 x 274 mm HX-5W-WP Sealed type 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) 546 Input Terminal Sensitivity (1 W, 1 m) 546 Speaker Component HX-5B-WP Continuous pink noise: 200 W / Continuous program: 600 W HX-5 1.7 kHz Directivity Angle HX-5W Bass-reflex type Rated Impedance 100 dB Crossover Frequency HX-5B Power Handling Capacity 8 Ω Sensitivity (1 W, 1 m) Specifications Enclosure Continuous pink noise: 250 W (IEC60268-5: 350 W) / Continuous program: 750 W Power Handling Capacity Frequency Response HX-7W-WP Sealed type Mixers / DSP Enclosure Wireless Microphone Systems HX-7B 408 FB-120B/W Specifications 70 data Rated Impedance Screw terminals Speakon Speakon Screw terminals NL4MP connector NL4MP connector Attach the supplied terminal cover. Speaker cable (60 cm long) Speakon NL4MP connector Side Front Screw terminals Mixer Power Amplifiers 546 Screw terminals Speakon Screw terminals NL4MP connector Power Amplifiers • HX-5B-WP/5W-WP Input Section 546 664 • HX-5B/5W Input Section 664 Screw terminals Power Amplifiers Mixer Power Amplifiers HX-7 497 342 Front Mixers / DSP HX-5 274 408 Screw M8 x 25 (8 positions) 16 kg FB-120B/W Handle 448 528 528 Wireless Microphone Systems Line Array / Variable Dispersion Array Speaker / HX-5 HX-7 HX-5 Speakers Line Array / Variable Dispersion Array Speaker / HX-7 70 Speakers Speakers 270 505 70 122 505 Rear Rearview view 310 450 Front Front ViewView Side view Rear view 270 4-M8* 477 Front View 70 408 310 450 Side view Rear view Front View 40 477 40 408 Wired Microphones 122 70 408 448 528 70 408 Wired Microphones 528 Handle Side view 4-M8* Side view EASE Continuous pinkFB-150B/W noise: 200 W / Continuous program: 600 W Impedance Sensitivity (1 W, 1 m) 8 Ω 93 dB Frequency Response 40 Hz – 400 Hz (-10 dB) Speaker Component 38 cm cone-type Input Terminal Dimensions (W x H x D) Speakon NL4MP x 2 and M5 screw terminal, distance between barriers: 12.2 mm Enclosure: MDF, black or white (FB-150B/W), urethane paint Handle Punched net: Surface-treated steel plate, black & white (FB-150B/W), paint 505 x 528 x 477 mm Weight 30 kg Specifications FB-120B FB-150B/W Rated Input FB-120W Continuous pink noise: 200 W / Continuous program: 600 W Impedance 90 dB at installation in free sound field, 96 dB at installation in 1/2 free sound field Frequency Response 40 Hz – 1.2 kHz (-10 dB) Speaker Component 30 cm cone-type speaker Input Terminal 448 528 Finish Speakon NL4MP x 2 and M4 screw terminals Enclosure plywood, metal front grille black Dimensions (W x H x D) Weight 505 Rear view Front View Side view Handle Enclosure plywood, metal front grille white 408 × 408 × 450 mm 15 kg 122 270 477 40 122 09 Screw M8 x 25 (8 positions) 528 Screw M8 x 25 (8 positions) 8 Ω Sensitivity (1 W, 1 m) 505 Rear view Front View 270 477 Side view 10 INDEX Power Handling Capacity 448 528 FB-150W 40 FB-150B MeetingIO Series data Specifications Finish INDEX EASE 528 MeetingIO Series data Mounting Options Mounting Options HY-WM7W / HY-WM7B Hanging vertically with subwoofer On undereave walls HY-MS7W-WP / HY-MS7B-WP HY-60DW / HY-60DW-WP / HY-60DB / HY-60DB-WP On the ceiling On building structures HY-TM7W-WP / HY-TM7B-WP On the stand HY-VM7W / HY-VM7B Allows the dispersion angle 60 degrees. Wired Microphones On the wall vertically HY-WM1B / HY-WM1W / HY-WM1WP On the wall vertically On the wall horizontally HY-WM2B / HY-WM2W / HY-WM2WP Two speakers connected HY-CN1B / HY-CN1W / HY-CN1BWP / HY-CN1WWP On the ceiling vertically On the stand HY-ST1 Angle Adjustment Bar, black Allows the dispersion angle 60 degrees. Rigging Frame, white Rigging Frame, black Article number HY-CN7W* Wall Mounting Bracket, HY-CN7W-WP white HY-CN7B* Wall Mounting Bracket, HY-CN7B-WP black HY-60DW* Rigging Bracket, white, HY-60DW-WP outdoor use HY-60DB* Rigging Bracket, black, HY-60DB-WP outdoor use HY-PF7W* HY-PF7B* Rigging Bracket, white HY-VM7W* Rigging Bracket, black HY-VM7B* Wall Mounting Bracket, white, outdoor use Wall Mounting Bracket, black, outdoor use Matching Transformer Adapter Speaker Stand Adapter Article number Article number Rigging Frame, black HY-PF1B* Wall Mounting Bracket, black HY-WM2B* Rigging Frame, white HY-PF1W * Wall Mounting Bracket, white HY-WM2W * Rigging Frame, outdoor use HY-PF1WP Wall Mounting Bracket, outdoor use HY-WM2WP Ceiling Mounting Bracket, black HY-CW1B * Extension Bracket, black HY-CN1B* Ceiling Mounting Bracket, white HY-CW1W* Extension Bracket, white HY-CN1W* Ceiling Mounting Bracket, outdoor use HY-CW1WP Extension Bracket, outdoor use, black HY-CN1BWP Wall Mounting Bracket, black HY-WM1B* Extension Bracket, outdoor use, white HY-CN1WWP HY-MT7 Wall Mounting Bracket, white HY-WM1W* Speaker Stand Adapter HY-ST1* HY-ST7* Wall Mounting Bracket, outdoor use HY-WM1WP Matching Transformer MT-200 HY-WM7W* HY-WM7B* HY-TM7W-WP Wireless Microphone Systems Speaker Connection Bracket, black MeetingIO Series On the ceiling horizontally HY-CW1B / HY-CW1W / HY-CW1WP Wired Microphones Wireless Microphone Systems Speaker Connection Bracket, white Angle Adjustment Bar, white INDEX On the ceiling vertically Accessories Article number 11 Hanging vertically with subwoofer HY-PF1B / HY-PF1W / HY-PF1WP On the wall horizontally HY-ST7 Accessories *Indoor use only Hanging horizontally HY-TM7B-WP HY-MS7W-WP MeetingIO Series HY-PF7W / HY-PF7B Dispersion angle 60 degrees Mixer Power Amplifiers On the wall HY-CN7W / HY-CN7W-WP / HY-CN7B / HY-CN7B-WP Mixers / DSP Two speakers connected Speakers Line Array / Variable Dispersion Array Speaker / HX-5 Power Amplifiers Line Array / Variable Dispersion Array Speaker / HX-7 HY-MS7B-WP *Indoor use only 12 INDEX Speakers Power Amplifiers Mixer Power Amplifiers Mixers / DSP Speakers Speakers Line Array / Active Line Array / SR-D8 Adjusting mixing and DSP parameter settings, running simulations, and communicating—all can be done through the same GUI interface. The highly intuitive GUI enables quick and easy adjustment of settings, with a simulated graph of the sound As well as processing both analog and digital audio input, this innovative speaker pressure distribution providing a visual check of coverage areas according to the settings.The simulation function—along with harnesses 8 built-in digital amplifiers to project sound waves to targeted areas the exceptionally high communication speeds—allows users to immediately see and hear the results of changing the parameter Mixer Power Amplifiers with greater precision than is possible with conventional speakers. By digitally Power Amplifiers Unique GUI software for designing a perfect matching acoustic field DSP beam steering with instant simulation and high speed communication settings. shaping the width and angle of acoustic beams, it can steer sound precisely to desired areas without requiring a change of installation location. Mixer Power Amplifiers Power Amplifiers Speakers Speakers Main screen of the GUI control software Features Operation View • A total of 16 speakers (in up to 4 stacks) can be controlled as a single unit via GUI-operated software Selecting a stack or a speaker in the System Tree view-or selecting CobraNet Routing or Grouping Setting in the System Configuration view-allows users to access a view depicting the status of the system and settings. • A wealth of DSP functions, including gain, mute, compression, delay, auto-mixing, high/low pass filters, high/low shelving filters and a notch filter • Equipped with two analog audio input terminals and four digital audio input terminals for CobraNet connection, the speaker supports 6 x 2 matrix mixing. • Coverage: Horizontal – 90°; Vertical Beam Width – 45°; Vertical Beam Angle - ±45° (Adjustable via SR-D8-M Speakers and stacks are shown in this window in a tree configuration. System Configuration View SR-D8-S This window displays CobraNet routing and Grouping Settings. Preset View Users can display presets of settings by their allocated number or name; load presets onto speakers; or store settings on speakers using their preset numbers. PC Beam width: 30°/Beam angle: -20° Beam split in two directions Contents View Through this window, users can precisely adjust settings for each function selected in the Operation window. Wireless Microphone Systems SR-D8-S SR-D8-M SR-D8-S SR-D8-M SR-D8-S SR-D8-M Mixers / DSP Wireless Microphone Systems Connection Image Network Mixers / DSP System Tree View dedicated GUI software) Wired Microphones 2 nd Floor 2 nd Floor 1 st Floor INDEX 1 st Floor 13 1 st Floor 1 st Floor Mixer View DSP View Beam Steering View As well as displaying the input level for each input channel, this window allows users to set functions such as auto-mix (for gating or ducking), fader, and 6 x 2 matrix. The fader can also be set independently for each output channel, with a view provided of the mixing output level. Users can adjust a number of signal processing functions independently for each speaker, including settings for muting, gain adjustment, high- and low-pass filters, and compressors. By setting parameters such as speaker location, audience position, and beam angle and width, users can control the vertical steering angle of sound beams projected from a speaker. Users can also see an instant visual simulation of how changes to the settings affect the steering of the beams. 14 MeetingIO Series 2 nd Floor 2 nd Floor INDEX MeetingIO Series Wired Microphones Beam splitting point: At the center point of all the transducers in a single stack. Bottom terminals • 2-way Line Array speaker in which woofers and tweeters are arranged vertically in close proximity to each another • Excellent speech clarity • Internal two-way passive crossover network circuitry for single-amplifier operation SR-D8-M SR-D8-S Power Consumption 315 W (Rated output), 72 W (Based on EN Standards) 320 W (Rated output), 72 W (Based on EN Standards) SR-D8CS Fixing Bar SR-D8FB Hoisting Bracket SR-D8HB Extension Plate SR-D8EP 310 130 Hz – 20 kHz 100 dB or more (A-weighted), DSP+Amplifier Amplication System Class D, 8 channels Output Max SPL 2-channels, +4 dBu, 10 kΩ, electronically-balanced, removable terminal block (3P) - Enclosure: MDF, white, paint / Front grille: Punched steel plate, white, acrylic paint Dimensions (W x H x D) Weight Wall Mounting Adapter 160 x 895 x 255 mm 21 kg Optional Accessories Wall bracket Eyebolt SR-D8HB Hoisting Bracket Hoisting bracket Speaker bracket SR-D8WB Wall Mounting Bracket Input terminal 99 EASE data SR-D8CL Specifications SR-T5 Enclosure Bass-reflex type Power Handling Capacity Rated Impedance Continuous pink noise: 250 W, Continuous program: 750 W 8Ω Sensitivity 96 dB (1 W, 1 m equivalent, measured at 4 m (13.12 ft)) Frequency Response 70-20,000 Hz Crossover Frequency 3kHz Directivity Angle Horizontal: 100º, Vertical: 35º Speaker Component Low frequencyr: 13 cm (5.12“) cone-type x 8 High frequency: Balanced dome type x 24 Recommended Installation Height 4-5.5 m (13.12 - 18.04 ft) (Speaker top, when installed in sport facilities 30 m (98.43 ft) in length) Adjustable Angle Range Downward: 0°, 1°, 2°, 3° (when the supplied mounting bracket is used) Horizontal (left or right): 5‘, 10‘ (when the optional SR-PB5 Wall Pan Bracket is used) lnput Terminal M5 screw terminal, distance between barriers: 12.2 mm Finish Enclosure: Plywood, black, urethane paint Baffle: Polypropylene, black Punched net: Steel plate, black, acrylic paint Mounting bracket: Steel plate, black, acrylic paint Dimensions 310 (W) x 1,239 (H) x 341 (D) mm Weight 29 kg (including accessories) Accessories Mounting bracket Ax 1, Mounting bracket Bx 1, Bracket mounting bolt x 6, Side cover x 5, Side cover mount screw x 10, Eye bolt x 1, Safety wire x 1 Option Wall Pan Bracket SR-PB5 Matching Transformer: MT-S0601 L bracket SR-D8EP SR-D8CS R bracket Extension Plate Wall Mounting Adapter SR-D8FB Fixing Bar 15 341 30 W, 1 channel (1 % THD+N) Max. 93 dB SPL (A-weighted, pink noise, 30 m) Finish MeetingIO Series Wall Mounting Bracket Safety wire mounting bolts installation work and after installation. 220 – 240 V AC, 50 / 60 Hz S/N Ratio Line Input SR-D8WB SR-D8CL Wall Mounting Adapter Optional Accessories SR-PB5 Wall Pan Bracket Adjustable Angel Range: Horizontal (left or right):5º, 10º Finish: Steel plate, black, paint Waight: 4.1kg (including accessories) MeetingIO Series Power Source • Safety wire supplied to prevent the speaker from falling during Wall Mounting Bracket 1239 Specifications Unit: mm SR-T5 Mixers / DSP data • Optional MT-S0601 Matching Transformer for use in high-impedance applications. 1167 Mixers / DSP • Horizontal angle adjustable in conjunction with optional SR-PB5 Wall Pan Bracket. Article number Frequency Response Wireless Microphone Systems • Speaker’s downward angle adjustable with accessory mounting bracket. Accessories SR-D8-S Rear View Wireless Microphone Systems SR-D8-M Rear View EASE Wired Microphones Coverage Area Example Features Wired Microphones Power Amplifiers Mixer Power Amplifiers Rear terminals Power Amplifiers Sturdy impact-resistant construction ideal for the installation in small- or medium-scale indoor sports facilities. SR-D8-M terminals INDEX Speakers Line Array / dedicated for gymnasiums / Type T SR-D8-M Mixer Power Amplifiers Line Array / Active Line Array / SR-D8 MT-S0601 Matching Transformer Rated Input Power: 60W Input Impedance: 100V Line; 170Ω(60W), 330Ω(30W), 670Ω(15W) 70V Line; 83Ω(60W), 170Ω(30W), 330Ω(15W), 670Ω(7.5W) Output Impedance: 8Ω Waight: 1.2kg 16 INDEX Speakers Speakers Versatile operation and installation features enhance sound reinforcement applications Mounting Options Features Two speakers connected SR-EP4/EP4WP • Vertically adjustable to max 5°, horizontally to max 20° • Horizontally adjustable to max. 30° SR-WB4/WB4WP [Side] • Power handling – 600W (single amp mode) / High:240W, Low: 240W (bi-amp mode) Blank panel (The optional MT-S0601 Matching Transformer can be installed inside.) 60 • Up to 2 speakers can be stacked 60 60 60 • Composed of 8 x 10 cm (4”) LF drivers and 24 x HF drivers • Splash-proof version(IPX4) available Mixer Power Amplifiers [Front] • Single or bi-amp mode Input terminal panel • High impedance – compatible by using the optional MT-S0601 30 60 Hanging SR-SA4 SR-S4L Rear View For protection SR-PP4 On the stand SR-SA4 On the stand SR-FS4 SR-S4LWP Rear View Mixers / DSP SR-S4L/S4LWP 30 255 100 50 87 60 ° [Side] Input terminal panel Blank panel (The optional MT-S0601 Matching Transformer can be installed inside.) Wireless Microphone Systems Blank panel (The optional MT-S0601 Matching Transformer can be installed inside.) 60 60 60 895 60 60 60 60 160 10° [Side] [Front] 892 [Front] 60 30 SR-S4S 255 100 50 160 Wireless Microphone Systems Input terminal panel 0 30 6 100 50 303 SR-S4LWP Rear View SR-S4S Rear View SR-S4SWP Rear View Accessories Article number 160 [Side] 255 100 50 60 60 60 10° SR-FB4* Wall Tilt Bracket SR-TB4* Extension Plate SR-EP4* Wall Tilt Bracket, outdoor use SR-TB4WP data Extension Plate, outdoor use SR-EP4WP Input terminal panel 100 50 Specifications Power Handling Capacity303 Rated Impedance Sensitivity (1 W, 1 m) Max SPL (Rated input, 1m) 0 30 6 892 EASE Blank panel (The optional MT-S0601 Matching Transformer can be installed inside.) SR-S4L SR-S4LWP SR-S4S Rear View SR-S4SWP Rear View Dimensions (W x H x D) Stand Adapter SR-SA4* SR-S4SWP 94 dB 93 dB 122dB 121dB Frequency Response Directivity Angle Speaker Component Color SR-S4S Continuous program: 600 W 8 Ω Article number Flying Bracket 87 60 ° [Front] 30 SR-S4S Wired Microphones SR-S4L Rear View MeetingIO Series 30 60 Mixers / DSP On the wall SR-TB4/TB4WP 60 30 255 100 50 160 • 2-way slim line array for permanent installation 100 50 Wired Microphones On the wall SR-S4L/S4LWP • Sync-Drive technology creates ideal linear sound source 100 50 MeetingIO Series Speakers Slim Line Arrays / Type S Power Amplifiers Slim Line Arrays / Type S 895 Speakers Power Amplifiers Mixer Power Amplifiers Speakers Wall Mounting Bracket SR-WB4* Protection Pad SR-PP4 70 Hz – 20 kHz H: 90 deg., V: 0 deg. Low: 4" cone-type x 8, High: 1" balanced dome-type x 24 white H: 90 deg. , V: 10 deg. Low: 4" cone-type x 8, High: 1" balanced dome-type x 24 white 160 × 895 × 255 mm 160 × 892 × 303 mm Wall Mounting Bracket, outdoor use SR-WB4WP 17 18 INDEX INDEX *Indoor use only Slim Line Arrays / Type H Ultra slim enclosure for clearly intelligible speech Mounting Options Two speakers connected SR-EP3 On the wall SR-WB3 Speakers Slim Line Arrays / Type H On the wall SR-TB3 Hanging SR-FB3 Power Amplifiers Power Amplifiers Speakers Speakers On the stand SR-SA3 • Adjustable in the range of 0° to 5° downward and 0° to 15° leftward or rightward Features • Sync-Drive technology creates ideal linear sound source Mixer Power Amplifiers • Type H consists of 4 models : short model (SR-H2S/H2L) and long version (SR-H3L/H3S) • Power handling – 180W (SR-H2L/H2S) /360W (SR-H3L/H3S) • Short length models contain 9 x 7 cm (2.8”) full-range speakers, while the taller long models come with 16 speakers • Attractive and narrow 84 mm design allows speakers to fit in well with the interior décor SR-H3L Rear 40 Rear 40 Mounting screw (M5) Side MountingRear screw (M5) Input terminal 40 115 Input terminal Blank panel Side Rear Mounting screw (M5) (The optional MT-S0301 Matching Blank panel 40 Input 115 Transformer be terminal installed inside.) (The optional can MT-S0301 Matching Mounting screw (M5) Transformer can be installed Blank panel inside.) (The optional Input terminal MT-S0301 Matching Transformer can be installed inside.) Blank panel (The optional MT-S0301 Matching Transformer can be installed inside.) 302 115 Front 84 Side 157 Blank panel inside.) Transformer can be installed (The Inputoptional terminalMT-S0301 Matching Transformer can be installed inside.) Blank panel (The optional MT-S0301 Matching Transformer can be installed inside.) Accessories 254 250 20° 20° 250250 84 663.4 663.4 20°20° 663.4 663.4 115 Side Wireless Microphone Systems 40 Side Mounting screw (M5) Mounting Rear screw (M5) Input terminal 40 Input terminal Blank panel Rear Mounting screw (M5) (The MT-S0301 Matching Blankoptional panel 40 Input terminal inside.) Transformer be installed (The optional can MT-S0301 Matching Mounting screw (M5) Wired Microphones 115 Front SR-H2S 84 Front 40 Side 157 264 41.2 41.2 SR-H2S 250256 84 Unit: mm Mounting screw (M5) Rear Unit: mm Mounting screw (M5) Input terminal 40 (M5) Input terminal Blank panel Rear Mounting screw Unit: mm (The optional MT-S0301 Matching Blank panel 40 can Transformer be installed inside.) Input terminal (The optional MT-S0301 Matching Mounting screw (M5) Transformer can be installed Blank panel inside.) (The optional MT-S0301 Matching Input terminal Transformer can be installed inside.) Blank panel (The optional MT-S0301 Matching Transformer can be installed inside.) 250 264 Rear 40 Rear 40 Rear 250 250 Side 115 Front Side 157 84 Front SR-H3S Side 157 84 Front SR-H3S 84 1177.21177.220°20° Front 84 Unit: mm 1177.2 1177.2 Rear 256 41.2 41.2 Side 25625641.241.2 SR-H2S Front 254 250 SR-H3S 20° 20° 254254 250250 250250 264264 41.241.2 SR-H3S SR-H2S Mixers / DSP 250302 250 250 302250 41.2 41.2 302 1186.4 1186.4 250 250 336 250250 668.4 668.4 668.4 668.4 Front 84 41.2 336 41.2 33633641.241.2 Rear Unit: mm 40 Rear Unit: mm Mounting screw (M5) 40 Mounting screw Side Rear (M5) Unit: mm Input terminal 40 115 Input terminal Blank panel Mounting screw (M5) Side Rear MT-S0301 Matching Unit: mm (The Blankoptional panel 40 115 Transformer be terminal installed inside.) Input (The optional can MT-S0301 Matching Mounting screw (M5) Transformer can be installed Blank panel inside.) (The optional MT-S0301 Matching Input terminal Transformer can be installed inside.) Blank panel (The optional MT-S0301 Matching Transformer can be installed inside.) 1186.41186.4 SR-H2L Front Side 84 115 Front SR-H2L Side 84 115 Front SR-H2L 84 Front Side 84 SR-H3L Side Front 115 84 115 Front SR-H3L 84 Front 84 302302 SR-H3L SR-H2L 250250 250250 • High impedance – compatible by using the optional MT-S0601 41.241.2 302302 • Up to 2 speakers can be stacked (SR-H3L + SR-H2L or SR-H3L + SR-H3L) Wired Microphones Wireless Microphone Systems Mixers / DSP Mixer Power Amplifiers • Full-range ultra slim line array speaker for permanent installation Article number Article number Wall Tilt Bracket SR-TB3 Stand Adapter SR-SA3 Wall Mounting Bracket SR-WB3 Matching Transformer MT-S0301 Flying Bracket SR-FB3 Speaker Stand ST-34B Extension Plate SR-EP3 Specifications SR-H2L Power Handling Capacity Rated Impedance Sensitivity (1 W, 1 m) 92 dB Frequency Response 80 Hz – 18 kHz SR-H2S Continuous program: 180 W Speaker Component Directivity Angle SR-H3S Continuous program: 360 W 90 dB 8 Ω 95 dB 92 dB 90 Hz – 17 kHz 110 Hz – 18 kHz 90 Hz – 17 kHz 7 cm cone-type x 9 Horizontal: 90°/ Vertical: 0° Finish INDEX SR-H3L Horizontal: 90°/ Vertical: 20° 7 cm cone-type x 16 Horizontal: 90°/ Vertical: 0° Horizontal: 90°/ Vertical: 20° Enclosure: MDF, white, paint / Front grille: Punched steel plate, white, acrylic paint Dimensions (W x H x D) 84 x 668.4 x 115 mm 84 x 663.4 x 115 mm 84 x 1,186.4 x 115 mm 84 x 1,177.2 x 157 mm Weight 4.4 kg 4.2 kg 7.6 kg 7.9 kg 19 MeetingIO Series data 20 INDEX MeetingIO Series EASE Speakers Affordable coaxial array speaker for both permanent installation and portable application HS-120B/120W/1200BT/1200WT 320 361 448 Wall Mount Front View • Coaxial tweeter array with large-diameter woofer in a compact, lightweight enclosure • A wide variety of optional brackets for permanent installation Bottom View • Easy to carry and easy to install, with handle for easy transportability Mixers / DSP 176 Rear View • Twin input terminal connections (Speakon and screw terminal) ® Accessories Article number 451 HS-120B/120W/1200BT/1200WT 400 Wall / Ceiling Mounting Bracket, black •Horizontal orientation HY-1200HB • - - - Wall / Ceiling Mounting Bracket, white •Horizontal orientation HY-1200HW - • - - HY-1200VB • - - - HY-1200VW - • - - - - • - 560 320 361 Wall / Ceiling Mounting Bracket, black 448 •Vertical orientation Wired Microphones Front View Front View 120 2–M8 Side View Wall / Ceiling Mounting Bracket, white Side View •Vertical orientation 120 Wall / Ceiling Mounting Bracket, black 176 241 2–M8 EASE Rear View Rear View HS-1500B/1500W/1500BT/1500WT data Specifications Power Handling Capacity HS-120B / HS-120W451 HS-1200BT / HS-1200WT HS-150B / HS-150W HS-1500BT / HS-1500WT 400 Continuous pink noise: 100 W, Continuous program: 300 W 8 Ω, 100 V: 170 Ω (60), 330 Ω (30), 8 Ω, 100 V: 170 Ω (60), 330 Ω 8 Ω 670 Ω (15 W) (30), 670 Ω (15 W) 97 dB 98 dB 8 Ω W Sensitivity (1 W, 1 m) Frequency Response 80 Hz – 20 kHz Speaker Component 70 Hz – 20 kHz 30 cm cone-type, Balanced dome-type x 6 Connection Front View 120 2–M8 Side View Polypropylene, black (HS-120B) or white (HS-120W) 361 x 448 x 320 mm 10 kg 12 kg Wall / Ceiling Mounting Bracket, white HY-1500HW - - - • Wall / Ceiling Mounting Bracket, black •Vertical orientation HY-1500VB - - • - Wall / Ceiling Mounting Bracket, white •Vertical orientation HY-1500VW - - - • Wall Mounting Bracket, black •in combination with HY-1200 / HY-1500 series brackets HY-W0801 • - • - Wall Mounting Bracket, white •in combination with HY-1200 / HY-1500 series brackets HY-W0801W - • - • ST-34B • • • • 451 x 560 x 400 mm 14 kg Speaker Stand •in combination with HY-1200 / HY-1500 series brackets 241 8.5 kg HY-1500HB 60 Hz – 20 kHz 38 cm cone-type, balanced dome-type x 6 Neutrik NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm Finish Dimensions (W x H x D) Weight W 560 Rated Impedance •Horizontal orientation •Horizontal orientation Bottom View Bottom View HS-120B /HS-1200BT HS-120W /HS-1200WT HS-150B / HS-1500BT HS-150W /HS-1500WT Wired Microphones Wireless Microphone Systems HS-1500B/1500W/1500BT/1500WT Wireless Microphone Systems • Can be used as a floor monitor MeetingIO Series Mixers / DSP 2–M8 • Well-controlled sound coverage : 90 ° horizontal x 40°vertical MeetingIO Series Side View 120 Features INDEX Stand Mixer Power Amplifiers Ceiling Mount Power Amplifiers Mounting Options 21 22 Bottom View INDEX Speakers Coaxial Arrays / HS Series Mixer Power Amplifiers Power Amplifiers Speakers Max. 37 Max. 200 Ceiling Ceiling reinforcement Ceiling mounting ring (accessory) Ceiling 30 1.5 1.5 Rear View Safety wire 60 cm in length (accessory) 229 Side View 45 Max.37 Max.200 30 ø245 Ø195 Ø230 41 Rear View Safety wire 60 cm in length (accessory) Speaker 30 The F-Series provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks 38 Side View 227 65 Ø200(Mounting hole) 10 Wide dispersion Max. 37 Max. 200 Ceiling reinforcement ring (accessory) Ceiling mounting 200 F-2322C Safety wire Mixer Power Amplifiers Side View Rear Viewa wide area beaming tendencies are minimized, resulting in a natural, sound over 12 well-balanced 1.5at all levels. Conventional Ceiling reinforcement ring (accessory) mounting speakers exhibit high frequency roll-off characteristics as the distance60between speaker and listener Ceiling increases. An ideal cm in length (accessory) ceiling mounted speaker‘s response characteristics should include wide dispersion and non-frequency dependent directionality and this ceiling speaker series proves that. 5" full-range 60W 65 Rear View Safety wire 60 cm in length (accessory) Ceiling mounting 154 Side View Ceiling reinforcement ring (accessory) 5" full-range 65 10 41 Ceiling reinforcement Ceiling mounting ring (accessory) 229 Side View 45 30 Ø195 Ø230 Max. 37 Max. 200 Ceiling 30 ø195 ø230 Ø200(Mounting hole) F-122C 10 45 Wired Microphones Max. 37 Max. 200 30W ø200 (Mounting hole) 1.5 Rear View Safety wire 60 cm in length (accessory)65 Ceiling reinforcement ring (accessory) Rear View 65 41 Side View 229 1.5 Ø200(MountingCeiling hole) mounting Ceiling mounting 41 F-122C F-2352C Ceiling 30 ø195 Ceiling Ceiling 1.5 Rear View Safety wire 60 cm in length (accessory) Wireless Microphone Systems 30W 45 Side View 200 Rear View Safety wire 60 cm in length (accessory) 1.5 Wired Microphones F-2352C 229 Side View 12 F-2352SC Max.37 Max.200 41 F-2322C Ø200(Mounting hole) 30 Ø195 Ø230 10 Ceiling reinforcement Ceiling mounting ring (accessory) Ceiling F-122C 1.5 Max.37 Max.113 65 Rear View Safety wire 60 cm in length (accessory) ø200 (Mounting hole) 10 45 Ø230 38 Side View 227 65 Ceiling F-2852C 30W ø250 (Mounting hole) 30 ø245 ø280 Mixers / DSP 10 45 5" coaxial F-2322C Max. 37 Max. 200 F-2852C ø230 6.5" coaxial Mixers / DSP ø195 Ceiling ø200 (Mounting hole) 10 45 Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. F-122C Speaker 65 Conventional F-2852C ø280 Expanded listening coverage area through extra-wide dispersion characteristics Max.37 Max.200 Mixer Power Amplifiers ø250 (Mounting hole) 10 45 to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and Wireless Microphone Systems Speakers 65 Power Amplifiers Wide Dispersion Speaker / F Series Ceiling Type ø230 Speakers Power Amplifiers Speakers Ceiling reinforcement ring (accessory) Ceiling mounting ø200 (Mounting hole) 65 F-1522SC ø200 (Mounting hole) 41 Side View 229 Ceiling mounting 11 Rear View 1.5 Rear View Safety wire 60 cm in length (accessory) 117 Side View F-2352SC Ceilingmounting mounting Ceiling Max. 200 30 ø195 Ø155 Ceiling 154 Side View F-2352C Ø135(Mounting hole) Ceiling 10 45 Ceiling reinforcement ring (accessory) Rear View 24 Ø200(Mounting hole) INDEX 6W Max.37 Max. 37 Max.106 F-1522SC MeetingIO Series Max. 37 Max. 200 4" full-range Ø200(Mounting hole) F-2352SC 23 Ceiling reinforcement Ceiling mounting ring (accessory) Ceiling 1.5 37 3 Rear View Safety wire 60 cm in length (accessory) 41 INDEX Ceiling 30 ø195 Side View 200 ø230 F-2352SC 12 F-2322C Max.37 Max.113 5" coaxial 6W Ø230 MeetingIO Series ø230 10 45 Co-axial type Compact two-way speaker designed for high efficiency, wide range and high power input handling capacity. Wide Dispersion Speaker / F Series Box EASE data Specifications Rated Input F-2852C 60W F-2352C 30W F-2352SC 6W Tap Settings 100 V: 60W, 30W, 15W, 3W 70V: 60W, 30W, 15W, 7.5W, 1.5W 25V: 7.5W, 3.7W, 1.9W, 0.9W, 0.2W 8Ω 100V: 30 W, 10W, 3W, 1W 70V: 30 W, 15 W, 5 W, 1.5W, 0.5W 25V: 3.7W, 1.9W, 0.6W, 0.2W, 0.06W 8Ω 100 V: 6 W, 3 W, 1W, 0.5W 70V:6W, 3W, 1.5W, 0.5W, 0.25W 25V: 0.75W, 0.4W, 0.2W, 0.06W, 0.03W 8Ω Sensitivity (1W, 1m) 91dB 90dB 89dB Max SPL (Rated input, 1m) 109dB 105dB 97dB Frequency Response 60Hz – 20kHz 70Hz – 20kHz 80Hz – 20kHz Mounting Hole Diameter ø250 mm ø200mm ø200mm Speaker Component Low: 6" cone-type, High: Dome-type Low: 5" cone-type, High: Balanced dome-type Low: 5" cone-type, High: Balanced dome-type Color Dimensions Baffle: black/Rim: white/Punched net: white ø280 x 227(D) mm ø230 x 229(D) mm Power Amplifiers Wide Dispersion Speaker / F Series Ceiling Type Speakers Speakers Features Mixer Power Amplifiers Speakers Power Amplifiers Mixer Power Amplifiers Speakers • 2-way speaker with high quality woofer and balanced dome tweeter • Octagonal horn for clear, wide-area sound coverage Baffle: black/Rim: white/Punched net: white/Dust proof bag: black • Wide dispersion angle - F-1000: 90° x 90°, ø230 x 154(D) mm • Easily mountable 80°x 80°dispersion angle horn F-1300/2000: 110° x 100° adapter for increased dispersion control(F-2000 only) • Built-in speaker protection for low impedance models Full-range type • Easy impedance selection by rotary switch • Great variety of brackets available bracket fixing screw included F-2322C 30W F-122C 30W F-1522SC 6W Tap Settings 100V: 30 W, 10W, 3W, 1W 70V: 30 W, 15 W, 5 W, 1.5W, 0.5W 25V: 3.7W, 1.9W, 0.6W, 0.2W, 0.06W 8Ω 100V: 30 W, 10W, 3W, 1W 70V: 30 W, 15 W, 5 W, 1.5W, 0.5W 25V: 3.7W, 1.9W, 0.6W, 0.2W, 0.06W 8Ω 100 V: 6 W, 3 W 70V: 6W, 3W, 1.5W 25V: 0.75W, 0.4W, 0.2W 8Ω Sensitivity (1W, 1m) 90dB 90dB 88dB Max SPL (Rated input, 1m) 105dB 105dB 96dB Frequency Response 70Hz – 20kHz 70Hz – 20kHz 65Hz – 18kHz Mounting Hole Diameter ø200mm ø200mm ø135mm Speaker Component 5" cone-type 5" cone-type 4" cone-type F-1000/1300 supplied brackets [Front] [Side] [Rear] [Bottom] [Speaker bracket] 131 Mounting holes 15º ø155 x 117(D) mm 30 mm 30 mm 28 30 Article number Anchor Hanging Bracket HY-AH1 F-2852C • F-2352C • F-2352SC • F-2322C • F-122C • 30 130 F-1522SC 2-M5 mounting screw hole (Effective screw depth: 14 mm) - w/HY-RR2 Tile Bar Bridge HY-TB1 • • • • • - w/HY-RR2 4-ø6 mm 30 mm 4-ø6 mm 45 mm Wired Microphones [Wall bracket] Accessories 4-ø6 mm Wired Microphones ø230 x 229(D) mm 30º 25 mm [Joint bracket] Baffle: black/Rim: white/Punched net: white/Dust proof bag: black Baffle: black/Rim: white/Punched net: white ø230 x 200 (D) mm F-1000BT/WT/BTWP/WTWP 30 Dimensions with horn adapter • Stylish and highly rigid speaker casing design Wireless Microphone Systems Specifications Rated Input Color Mixers / DSP • Speaker bracket, joint bracket, wall bracket, data 202 Wireless Microphone Systems Mixers / DSP EASE 45 mm EASE HY-BC1 - • • • • - Trim Ring HY-TR1 - • • • • - w/HY-RR2 Reinforcement Ring HY-RR1 - - - Specifications Rated Input F-1000BT/WT 15W 100 V: 15W, 5W, 3W, 1W 70V: 15W, 7.5W, 2.5W, 1.5W, 0.5W 8Ω Tap Settings F-1300BT/WT/BTWP/WTWP - • 87dB - - • - - - 99dB Frequency Response 85Hz – 20kHz [Side] 162 Speaker Component HY-RR2 100 V: 15W, 5W, 3W, 1W 70V: 15W, 7.5W, 2.5W, 1.5W, 0.5W Max SPL (Rated input, 1m) Directivity Angle [Front] Reinforcement Ring F-1000BTWP/WTWP 15W Sensitivity (1W, 1m) - Color H: 90 deg, V: 90 deg. [Bottom] [Rear] 161 Low: 4" cone-type, High: Balanced dome tweeter black or white 15º 30 76.2 130 (W) x 202 (H) x 131(D) mm 250 INDEX Dimensions 25 MeetingIO Series Back Can Mounting holes 26 INDEX MeetingIO Series data 76. 50 37 Speakers 50 Wide Dispersion Speaker / F Series Box F-1300BT/WT/BTWP/WTWP 244 48 2-M5 mounting screw hole (Effective screw depth: 14 mm) Various M Speakers Speakers Mounting holes 50 F-1000/1300 supplied brackets 30 2-M5 mounting screw hole (Effective screw depth: 14 mm) 4-ø6 mm 4-ø6 mm Sensitivity (1W, 1m) 90dB Max SPL (Rated input, 1m) 105dB Without adaptor 235 15º With adaptor With horizontal 110° adaptor 80° × 80°80° octagonal horn horn [Rear] [Bottom] × 80° octagonal horizontal 80° horizontal 80° Pole Mount (outdoor) YS-60B [Speaker bracket] 80° × 80° octagonal horn 30º 76.2 [Wall bracket] horizontal 80° horizontal 80° Mounting holes 25 mm 30º 4-ø6 mm 48 50 2-M5 mounting screw hole (Effective screw depth: 14 mm) 30 mm 50 Article number F-1000 F-1300 F-2000 [Wall bracket] 30 mm With adaptor 4-ø6 mm Article number F-1000 F-1300 F-2000 Cluster Bracket HY-CL10B • • - Wall / Ceiling Bracket, black HY-CM20B - - • Wall / Ceiling Bracket, black HY-CM10B • • - Wall / Ceiling Bracket, white HY-CM20W - - • Wall / Ceiling Bracket, white HY-CM10W • • - Pole Mount (outdoor) YS-60B • • • Cluster Bracket HY-CL20B - - • ST-16A • • • 30 mm 4-ø6 mm 45 mm 50 373 On the stand (indoor use) ST-16A Supplied brackets With adaptor With adaptor 80° × 80° octagonal horn[Joint bracket] [Joint bracket] 244 HY-CL10B / HY-CL20B 110° × 100° octagonal horn [Side] [Speaker bracket] Cluster mount (indoor use) HY-CM10B / HY-CM10W HY-CM20B / HY-CM20W 162 (W) x 250 (H) x 161(D) mm 6-M5 mounting screw hole (Effective screw depth: 14 mm) [Front] Ceiling Mount (indoor use) horizontal 80° black or white F-2000BT/WT/BTWP/WTWP Dimensions Various Mounting Options 80° × 80° octagonal horn Low: 5" cone-type, High: 1" dome tweeter horizontal 80° Color Various Mounting Options With adaptor H: 110 deg, V: 100 deg. 80° × 80° octagonal horn Speaker Component HY-BH10B 80Hz – 20kHz With adaptor Directivity Angle Board wall mount (indoor use) 70V: 30W, 15W, 5W, 1.5W, 0.5W 8Ω Frequency Response horizontal 110° With optional brackets 30 mm Specifications Rated Input Ceiling Mount 4-ø6 mm 45 mm data Without adaptor 110° × 100° octagonalVarious horn Mounting Options 110° × 100° horn horn 110° octagonal × 100° octagonal horizontal 110° 110°Without adaptor horizontal Without 110° × 100°adaptor octagonal horn 45 mm F-1300BT/WT F-1300BTWP/WTWP 110° × 100° octagonal horn 30W 30W horizontal 110° 100 V: 30W, 10W, 3W, 1W horizontal 110°100 V: 30W, 10W, 3W, 1W 70V: 30W, 15W, 5W, 1.5W, 0.5W EASE Wall Mount 30 mm Without adaptor Without adaptor 2-M5 mounting screw hole horizontal 110° (Effective screw depth: 14 mm) 30 mm Mixer Power Amplifiers 110°30× 100° octagonal horn [Wall bracket] Various Mounting Options Various Mounting Options With supplied brackets 30 mm 30 mm 250 76.2 30 30º Tap Settings Mixers / DSP 25 mm [Joint bracket] Power Amplifiers Mounting holes Mixers / DSP Power Amplifiers 15º Wired Microphones Mounting Options Various Mounting Options Without adaptor 38 Wireless Microphone Systems [Speaker bracket] 161 Wireless Microphone Systems 162 [Bottom] [Rear] Mixer Power Amplifiers [Side] 4-ø6 mm Wired Microphones [Front] 45 mm horizontal 80° EASE Specifications Rated Input Tap Settings Sensitivity (1W, 1m) Max SPL (Rated input, 1m) Frequency Response Directivity Angle Speaker Component Color INDEX Dimensions 27 F-2000BT/WT 60W 100 V: 60W, 30W, 15W, 3W 70V: 60W, 30W, 15W, 7.5W, 1.5W 8Ω F-2000BTWP/WTWP 60W 100 V: 60W, 30W, 15W, 3W 70V: 60W, 30W, 15W, 7.5W, 1.5W Speaker Stand Board Hanger Bracket HY-BH10B • • - 92dB/93dB (with horn adapter) 110dB 65Hz – 20kHz H: 110 deg, V: 100 deg. /H: 80 deg., V: 80 deg. (with horn adapter) Low: 8" cone-type, High: 1" dome tweeter black or white 244 (W) x 373 (H) x 235(D) mm 28 INDEX MeetingIO Series data MeetingIO Series 80° × 80° octagonal horn 312 Design Speaker / H Series 46 [Side Panel] Speakers Trim Piece Speakers Speakers Grille Easy to install. Easy to aim. And easy on the eyes. Power Amplifiers Power Amplifiers 44 HB-1 Features • Flush-mount speaker • For undisturbed interior aesthetics • Acoustic super-woofer with acoustical bandpass filtering construction The building’s design calls for speakers that can be aimed, but the building’s architect is balking at ugly boxes and • High-power 8” cone woofer with ferrite magnet and aluminum bobbin brackets. TOA has a solution. With H Series, we’ve taken a whole new approach to mounting speakers—we eliminated the • Low impedance (8Ω) operation Mounting Hole Mixer Power Amplifiers where you need it. And our HB-1 subwoofer hides neatly between standard 16-inch-on-center wall studs. All H Series grilles are attractive, simple, and uncluttered, and can be painted to match—and disappear into—any architecture. The H-3 544 restaurants, 268 stores, atriums, foyers, hallways, pew backs: H Series speakers are ideal for any environment where both (Mounting hole) sound quality and appearance are critical. Common features : (Mounting hole) 98 440 Wide Dispersion Model offers 140° of horizontal coverage and mounts with a standard two-gang electrical box. Offices, 287.2 (Adapter Panel) 122 (Adapter Panel) Mixer Power Amplifiers brackets. Our H-1 and H-2 are designed to be mounted into the wall or ceiling, then aimed to deliver quality sound exactly • Sleek and attractive, 430 no brackets required 32 103 • Paintable grilles blend Attach Speaker Assembly Aim Speaker and lock Mixers / DSP Install Plate Snap on cover HB-1 H-1 Features data Specifications Rated Input • Wall or ceiling mount Up to 90˚ locking driver positioning • Either low impedance (4Ω/16Ω) or high impedance (70V/100V) operation adjustment. 46 100V: 12W, 6W, 3W 70V: 12W, 6W, 3W, 1.5W 4Ω, 16Ω 100V: 12W, 6W, 3W 70V: 12W, 6W, 3W, 1.5W 4Ω, 16Ω Sensitivity (1W, 1m) 85dB Max SPL (Rated input, 1m) 96dB 88dB Frequency Response 120Hz – 20kHz Speaker Component Low: 3" x 2" cone-type, High: Balanced dome-type 99dB 100Hz – 20kHz Low: 4" cone-type, High: Balanced dome-type Color 312 H-2/H-2WP Features H-3/H-3WP Features • Surface-mount speaker on the wall or ceiling • Surface-mount speaker on the wall • Rotate within housings for flexible aiming • Weather-proof version available (H-3WP) • Weather-proof version available (H-2WP) • 1” soft dome tweeter with neodymium magnet and 2 x 4” cone woofers • 1” balanced dome tweeter and 4” cone woofer • Either low impedance (8 Ω / 16 Ω) or high impedance (70 V / 100 V) operation • Either low impedance (4Ω/16Ω) or high impedance (70V/100V) operation ø268 x 111 (H) mm data Specifications Rated Input Tap Settings 111 312 (W) x 126 (H) x 90(D) mm EASE 129 295 Ø268 H-3 H-3WP 30W 100V: 30W, 15W, 7.5W 70V: 30W, 15W, 7.5W, 3.75W 8Ω, 16Ω HB-1 240W (continuous program) 8Ω Sensitivity (1W, 1m) 89dB 91dB Max SPL (Rated input, 1m) 104dB 115dB Frequency Response 100Hz – 20kHz Speaker Component Low: 4" cone-type x 2, High: 1" dome-type (neodymium magnet) Dimensions 29 white Dimensions 318 Wired Microphones MeetingIO Series Tap Settings H-2WP 12W Enclosure: black/Frame: off-white/Punched net: off-white 295 (W) x 318 (H) x 129 (D) mm MeetingIO Series • 1” balanced dome tweeter and 3” x 2” cone woofer H-2 12W 45 – 200Hz 8" cone speaker Punched net; off-white 430 (W) x 544 (H) x 135 (D) mm 30 INDEX • Rotate within housings for flexible aiming H-1 Wired Microphones • Flush-mount speaker Color INDEX Wireless Microphone Systems EASE 44 Wireless Microphone Systems Mixers / DSP into architecture Inspired by the finest lighting fixtures for a perfect harmony with architecture and decor. Ready-to-install BGM Speakers featuring compact cubic design with versatile sound. The PE and PJ Series are bass-reflex HIPS resin enclosure 5” (12cm) cone-type speakers. The PE-304 and PJ-304 also Subwoofer 563 allowing them to be harmoniously installed with lighting equipment. • Consists of a set of 4 satellite speakers and a subwoofer, which are individually fitted with its own mounting brackets. 55 • Available in two colors (black or white), which can be selected to suit the room interior. Features Mixer Power Amplifiers Features includes a balanced dome tweeter. They have an outstandingly stylish design that is inspired by the finest lighting fixtures, Mixer Power Amplifiers Speakers Satellite Speaker System / BS-301 Power Amplifiers Design Speakers / PE, PJ Series 278 Power Amplifiers Speakers Speakers • Compact and highly efficient in performance. • The mounting brackets fitted onto the satellite speakers can be for 1 speaker or 2 speakers installation. • Ideally suited for BGM and announcements • Excellent sound quality 90 • Sturdy cable extendable up toø72 5 meters • Repaintable Max.5000 ø100 • Input impedance easily changeable 4-M8 • Horizontal and vertical angles can be easily adjusted during installations onto ceilings or walls. 360 210 100 Rear View 36 Side View • PE-304: Either low impedance (8Ω) or high impedance (70V/100V) operation Subwoofer Subwoofer Satellite Speaker Satellite Speaker Subwoofer 70Hz – 20kHz 5" cone-type + balanced dome tweeter 3–ø6.5ø72 36 ø186 x 251(H)mm (unit only) Mixers / DSP 390 278 390 97.5 55 210 Rear View Side View Rear View Side View Satellite Speaker (Horizontal) Tap Settings 360˚ Sensitivity (1W, 1m) PJ-64 6W 100 V: 6 W, 3 W, 1W 70V: 3W, 1.5 W, 0.5W 8Ω 90dB*1 104dB x 2ch Black PJ-304 30W 100V: 30 W, 20W, 15W, 10W, 5W 70V: 30 W, 20W, 15 W, 10W, 5 W 8Ω 91dB*1 106dB Frequency Response 100Hz – 18kHz 70Hz – 20kHz Speaker Component 5" cone-type 5" cone-type + balanced dome tweeter Color Off-white (RAL 9010 or equivalent) Off-white (RAL 9010 or equivalent) Dimensions ø186 x 369 (H)mm 3-Ø4.5 68 40Hz - 20kHz x 2ch Subwoofer: 6.5" cone-type x 2, Satellite Speaker: 3" cone-type For Subwoofer Satellite speaker mounting bracket White Side View Subwoofer: 210(W) x 390(H) x 563(D) mm Rear View Max SPL (Rated input, 1m) 98dB *1... 500Hz - 5kHz, pink noise Frequency Response Speaker Component Color 20 For Satellite speaker 81dB x 2ch Max SPL (Rated input, 1m) 100 Satellite Speaker: 92(W) x 97.5(H) x 100(D) mm Rear View Dimensions of wall or ceiling mount hole Indoor use only Available in BlackSide or View White color MeetingIO Series ˚ 70 Sensitivity (1W, 1m) Accessories Mounting Options 32 32 68 20 42 30.5 0˚ Specifications 89 ˚ Rated Input 92 4Ω x 2ch Dimensions ø60 3–ø6.5 data 30.5 (Horizontal) 360˚ 75 75 ˚ 70 97.5 • PJ-304: Either low impedance (8Ω) or EASE 36 ø186 58 89 ˚ 12 369 251 50 BS-301W Continuous Program: 160W x 2ch Rated Impedance ø186 high impedance (70V/100V) operation BS-301B 32 Wired Microphones Specifications Power Handling Capacity 42 • Ceiling or wall mount ø186 100 42 92 Adjustable angle 97.5 369 251 333 251 36 333 360 100 • Repaintable 4–ø5 ø16 0˚ Side View Rear View 4-M8 Satellite Speaker • Input impedance easily changeable 12 210 100 ø186 x 251(H) mm (unit only) • Flexible speaker direction adjustment with accessory brackets 23 360 Off-white (RAL 9010 or equivalent) Features ø72 31 4-M8 20 3-Ø4.5 68 3-Ø4.5 ø186 x 369 (H)mm single-system installation Satellite speaker mounting bracket double-system installation Dimensions of wall or ceiling mount hole Satellite speaker mounting bracket Dimensions of wall or ceiling mount hole 32 INDEX 90 100Hz – 18kHz 5" cone-type ø60 *1... 500Hz - 5kHz, pink noise ø60 3–ø6.5 INDEX (Horizontal) 360˚ Frequency Response Dimensions 100 106dB Speaker Component Color Max.5000 36 58 92 55 90dB*1 278 Sensitivity (1W, 1m) Max SPL (Rated input, 1m) 98dB 75 369 100 V: 6 W, 3 W, 1W 70V: 3W, 1.5 W, 0.5W PE-304 30W 100V: 30 W, 20W, 15W, 10W, 5W 89 30 W, 20W, 15 W, 10W, 5 W 70V: ˚ ˚ 70 8Ω 1 91dB* 30.5 Tap Settings 563 Wireless Microphone Systems 50 ø100 23 Wired Microphones MeetingIO Series PE-64 6Wø186 12 Wireless Microphone Systems 4–ø5 ø16 Specifications Rated Input 0˚ ø186 251 EASE data 4–ø5 ø16 50 333 Mixers / DSP 251 563 Digital Amplifier / DA Series Speakers Speakers Power Amplifiers Digital Amplifier / DA Series The power supply unit is the heart of the amplifier. To ensure consistently high performance and reliable operation, TOA Matching Transformer MT-251H Features • High efficiency Extremely high amplification efficiency of 80-90%, resulting in reduction in power consumption by more than 60% compared with Class-AB amplifiers. Conventional amps DA-250 series Up to 20 amplifier channels on 5 units! • Highly durable Stands up to extended hours of operation. The DA amplifier has undergone a large anumber of rigorous tests to prove its durability. In addition,TOA has been conducting a “non-stop driving test” of the DA Series. CE301 version DA-250D DA-250DH DA-250FH Number of Channels 2 Power Consumption* Rated power consumption 1kHz 8 ohms 400W, 2.8A 4 ohms 620W, 4.2A 100 Volts — — — 2300W, 16.8A 70dB 10kΩ (unbalanced), 20kΩ (balanced) +4dB (1.23V) 12V (23.8dBu) 10kΩ (unbalanced), 20kΩ (balanced) +4dB (1.23V) 14V (25.1dBu) 2 channels: 250 W x 2 (4 Ω), 170 W x 2 (8 Ω) 1 channel (BRIDGE): 500 W (8 Ω) 2 channels: 250 W x 2 (100 V line, 40 Ω) 4 channels: 250 W x 4 (4 Ω), 170 W x 4 (8 Ω) 2 channels (BRIDGE): 500 W x 2 (8 Ω) 4 channels: 4 channels: 250 W x 4 (100 V line, 40 Ω) 550 W x 4 (4 Ω), 350 W x 4 (8 Ω) 2 channels (BRIDGE): 1,100 W x 2 (8 Ω) 482 (W) × 44 (H) × 401.8 (D)mm 482 (W) × 88.4 (H) × 404.2 (D)mm 5.3kg Weight CU version 4 channels: 500 W x 4 (100 V line, 20 Ω) DC output, overheat protection, load shorting, overload current, maximum output Overheat protection, AC rush current Dimensions DA-250D 6.8kg DA-250DH DA-250F Power Source 9kg DA-250FH DA-550F DA-500F-HL 1650W, 22.4A 2800W, 35.5A — 2600W, 33.2A 580W, 9.1A 2350W, 30.4A 120V AC, 50/60Hz Number of Channels DA-250D (CE301/CU version) DA-250DH (CE301/CU version) 1550W, 11.3A 2750W, 19.9A — 100dB Protection Circuit Amplifier section Power supply section Comparison DA-250 vs. conventional multichannel amp Dual-Channel Power Amplifier — — 1150W, 8.3A 800W, 5.8A 1200W, 8.7A — — — 580W, 3.9A Input impedance Input sensitivity Input clipping Rated Output • Independent power supply Each of the channels has its own power supply. If the power supply of Channel 1 should fail, this won’t affect the operation of Channel 2. It is also possible to use the either channel as a spare amplifier. DA-500FH 4 S/N Ratio (A weighted) Inputs DA-550F 220 – 240V AC, 50/60Hz Crosstalk at 10kHz (A weighted) • Compact design The DA-250 Series is 1-unit size, and they can be efficiently mounted on a rack, so they require only a small installation space. Because the amplifiers do not generate much heat, 5 units can be stacked together in a rack. Wired Microphones DA-250F Power Source Mixers / DSP • High reliability The DA amplifier has a comprehensive protection circuitry for protection against excessive current flow due to overload, short circuit, unusual DC voltage output, and power amplifier heat sink temperature rise ( over 100°C), temperature rise inside the unit (over 80°C). Wired Microphones Mixers / DSP Mixer Power Amplifiers Never compromise ? that’s the TOA philosophy. • Amplifier with lightweight design Installation has become much easier thanks to the lightweight design. Wireless Microphone Systems Power Amplifiers quality products that offer worry-free use. DA-550F (CE301/CU version) DA-500F-HL (CU version) DA-500FH (CE301 version) 2 Power Consumption* Rated power consumption 1kHz 8 ohms 420W, 5.9A 4 ohms 650W, 8.7A 100 Volts — 4 — — 1200W, 15.9A 850W, 11.7A 1300W, 16.9A — — — 580W, 7.8A S/N Ratio (A weighted) 100dB MeetingIO Series 70dB Inputs Input impedance Input sensitivity Input clipping Rated Output 4-Channel Power Amplifier DA-250F (CE301/CU version) DA-250FH (CE301/CU version) Wireless Microphone Systems This testifies to TOA’s attitude to product development, which is always totally motivated by the desire to provide high- 4-Channel Power Amplifier 10kΩ (unbalanced), 20kΩ (balanced) +4dB (1.23V) 12V (23.8dBu) 10kΩ (unbalanced), 20kΩ (balanced) +4dB (1.23V) 14V (25.1dBu) 2 channels: 250 W x 2 (4 Ω), 170 W x 2 (8 Ω) 1 channel (BRIDGE): 500 W (8 Ω) 2 channels: 250 W x 2 (70 V line, 19.6 Ω) 1 channel (BRIDGE): 500 W (140 V line, 39.2 Ω) 4 channels: 250 W x 4 (4 Ω), 170 W x 4 (8 Ω) 2 channels (BRIDGE): 500 W x 2 (8 Ω) 4 channels: 250 W x 4 (70 V line, 19.6 Ω) 2 channels (BRIDGE): 500 W x 2 (140 V line, 39.2 Ω) 4 channels: 550 W x 4 (4 Ω), 350 W x 4 (8 Ω) 2 channels (BRIDGE): 1,100 W x 2 (8 Ω) 4 channels: 500 W x 4 (70 V line, 9.8 Ω), 550 W x 4 (8 Ω), 100 W x 4 (4 Ω) 2 channels (BRIDGE): 1,000 W x 2 (140 V line, 19.6 Ω), 1,100 W x 2 (16 Ω) MeetingIO Series Mixer Power Amplifiers Power Amplifiers engineers have given the DA Series a system that provides power independently to each of the four channels. M4 screw terminal, distance between barriers: 8.8 mm (0.35") Protection Circuit Amplifier section Power supply section DC output, overheat protection, load shorting, overload current, maximum output Overheat protection, AC rush current Dimensions Weight 482 (W) × 44 (H) × 401.8 (D)mm 6.6kg 482 (W) × 88.4 (H) × 404.2 (D)mm 5kg 8.8kg 33 34 INDEX INDEX 0 dB = 0.775Vrms *Typical data Stylish, reliable with unmatched performance Mosque sound made simple - pray with faith. The TOA A-5000 series offers the ability to control your music just the way you want it with built-in digital signal processors (DSP) that boast high efficiency and durability. Mixer Power Amplifiers A-5006 60W A-5012 120W Features Features • EASY Operation • Superior Sound QUALITY Built-in digital amplifier module + DSP module, designed with state-ofthe-art TOA technology. • 1U-half size compact and simple hardware for easy setting • Hi-/Low-Z speaker connection • 60W and 120W models LAN • 2 x mic/line inputs with mute Manual Mute Remote Master Volume (VCA) - Feedback Supressor for input 1 and 2 • SAFE, Reliable System Effect on/off RC-03 Remote Controller • ECO-FRIENDLY Performance Energy-Efficient Input 1,2: Mic -60 dB*/ Line -20 dB*, 2.2k ohm, electronically balanced Input 3,4: -10 dB*, 10 k ohm, unbalanced - Compressor for each input 1 and 2 ‐ 10-point filter for each output (High-pass/Low-pass/PEQ) Digital amplifier module Salat / Khutbah Azan Uses considerably less power. Light and Compact Mixers / DSP ‐ High pass filter and 4-point Parametric Equalizer for each input - Manual and Auto Mute Simple design, compact size. Plus remote controller for easy operation. DSP module Inside the MX-6224D • Intuitive GUI software for sound optimization Mixers / DSP Speakers Mixer Amplifier / MX-6224D Power Amplifiers Mixer Amplifier / A-5000 Easy to carry and install. 6.1 kg LAN SP OUT 70V/100V/4ohm selectable ‐ 5-point speaker Parametric Equalizer with built-in preset EQ 458.0W library of TOA’s speakers Energy Wireless Microphone Systems -79% 26.7 kg MX-6224D Conventional analog mixer amplifiers 97.7W Weight -77% Space Conventional analog mixer amplifiers -50% MX-6224D Note: Compared to TOA A-1724 and P-2240 models. Wireless Microphone Systems Speakers Power Amplifiers Mixer Power Amplifiers Mixer Power Amplifiers • 3-band EQ effective for all microphone inputs • Digital effects for microphone inputs Input Output S/N Ratio Function INDEX Finish Dimensions Weight 35 A-5012 100 - 240 V AC, 50/60 Hz 60W 120W 106W (rated output), 20W (based on cULus standards) Max. 2 A 207W (rated output), 39W(based on cULus standards) Max. 3 A 50 Hz - 20 kHz (1/8 output) 1 % or less (1 kHz, rated output) INPUT 1, 2: MIC -60 dB*, LINE -20 dB*, MIC/LINE selectable 2.2k ohms, electronically-balanced, removable terminal block (5 pins) INPUT 3, 4: LINE -20 dB*, 10k ohms, unbalanced, RCA pin jack SPEAKER: 4 ohms, 70 V (83 ohms), 100 V (170 ohms) Speaker: 4 ohms, 70 V (42 ohms) , 100 V (83 ohms) removable terminal block (5 pins) removable terminal block (5 pins) MIC 1, 2: 50 dB or more, LINE 1 - 4: 70 dB or more (A-weighted) Equalizer: 5 points settable on each input (High-pass filter x 1, Parametric equalizer x 4), FBS: settable on input 1 and 2, Compressor:settable on input 1 and 2, Mute: MANUAL/AUTO/OFF settable on each input, Equalizer: 10 points settable on output (Through, Low-pass filter, Parametric equalizer, High-pass filter), Speaker parametric equalizer: 5 points settable on each output 3.6 kg Panel: PS resin, black, Case: Sruface-treated steel plate, black. paint 210 (W) X 52.5 (H) X 375 (D) mm 3.9 kg 220 V – 240 V AC, 50/60 Hz Power Output 240 W x 2 channels (100 V, 42 Ω, rated output) Power Consumption 150 W (according to IEC60065), 650 W (at rated output, both channels) Application System Class D, Output transformerless galvanic isolated output Frequency Response 50 Hz - 20 khz, ±3 dB (at 1/3 rated output, rated load, from power amplifier input) Distortion Less than 1 % THD (at 1 kHz, 1/3 rated output power) Output Regulation Less than 2 dB no load to full load (at 1 kHz, 1/3 rated output power) Input Wired Microphones A-5006 MX-6224D Power Source MeetingIO Series Specifications Power Source Rated Output Power/ Current Consumption Frequency Response Distortion Specifications MIC 1: –50 dB* (24 V phantom powered)/ –60 dB* (phantom power OFF) 600 Ω, electronically-balanced, ø6.3 mm phone jack MIC 2 – 4: –66 dB*, 200 Ω, electronically-balanced, XLR-3-31 type and ø6.3 mm phone jack (either one usable) MIC 5 – 6: –60 dB*, 600 Ω, electronically-balanced, XLR-3-31 type and ø6.3 mm phone jack (either one usable) AUX 1: –10 dB*, 10 kΩ mixed monaural, unbalanced, RCA pin jacks (1 pair) AUX 2: –20 dB*, 10 kΩ mixed monaural, unbalanced, ø3.5 mm mini jack (3P: stereo) Power amplifier input: 0 dB*, 10 kΩ, unbalanced, RCA pin jacks (1 each for ROOM and OUTSIDE outputs) Output Speaker output: 2 zones Recording output Effect bus output Preamplifier output S/N Ratio 60 dB or more (All volume controls: min.) Dimensions 420 (w) x 99 (h) x 364.8 (d) mm Installation Method Desktop mount, Rack mount with mounting bracket MB-25B (option) Weight 6.5 kg *0dB = 1V 36 INDEX MeetingIO Series Wired Microphones • Optimal microphone sensitivity Cobra (Dante) 16x16 TCP/IP LPF PEQ HPF Comp Leveler Gate NOM Ducker D-901 D-2000 Delay FBS D-901 Max 12x8 1bus(mic) Console 232C PEQ HPF 12 Comp Leveler Gate NOM Ducker TCP/IP Filter Console Cobra (Dante) 16x16 232C TCP/IP 12 Comp Delay ARC Max 12 Max 12 SP Filter Xover Max 6 input PEQ LPF HPF PEQ HPF Comp Leveler Gate NOM Ducker Delay Comp Gate FBS 12 Gate NOM Ducker Effect Delay SP Filter Xover bus SP Filter Xover 12 Delay output Max 24 FBS Comp Comp Delay Max24 6 Max Fully modular, cost-effective digital mixer incorporating matrix capability and speaker filter function as well as mixing function. M-864D DP-K1 Max 8x8 12x8 8 bus 1bus(mic) Console TCP/IP 232C PEQ Filter HPF Comp Gate Leveler Gate NOM Ducker Effect Max 14x4 8x8 8 bus Delay Console TCP/IP Max 18 HPF Filter Tone Comp Gate FBS ARC 12 Max 12 FBS PEQ ARC 4 12 Max 7 5 1212 Max HPF HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS LPF PEQ HPF ARC 7 10 12 SP Filter Xover Comp Comp Gate Delay Comp Gate Delay SP Filter Comp Delay LPF SP PEQ Filter HPF Comp Comp Leveler Delay Comp Leveler Delay Max Max 18 6 SP Filter Xover Max 18 M-633D M-864D M-864D 14x4 Console TCP/IP HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS 9x3 14x4 Console TCP/IP DP-SP3 M-633D M-633D 9x3 2x6 9x3 ARC TCP/IP 12 M-9000M2 DP-SP3 2x6 LPF PEQ HPF TCP/IP 10 M-9000M2 Max 8x8 232C LPF PEQ HPF Comp Leveler SP Filter Xover Comp LPF PEQ HPF 12 Comp Leveler Delay LPF PEQ HPF Comp Leveler LPF PEQ HPF Gate NOM Ducker 12 232C • Can be expanded as application requires PEQ HPF Xover 10 M-9000M2 LPF • 12-input, 8-bus, 8-output channel configuration (12 x 8 matrix) with easy operation Max Comp 8x8 12 Leveler 12 12 • Convenient front panel controls and display make it easy to perform all functions Number of points 12 LPF PEQ HPF Gate NOM Ducker 12 12 Communication Interface 232C TCP/IP Features 12 Gate NOM Ducker Max 2x6 8x8 Delay Xover Speakers Comp Leveler Max 3 12 Max 6 Comp Gate LPF PEQ HPF 3 6 Max SP Filter Xover 7 Mixers / DSP Max Max 32in/out 12x8 (console) + 2in 1bus(mic) 24 bus Delay TCP/IP Max 24 FBS DP-SP3 Wireless Microphone Systems Comp DP-K1 D-901 Effect 3 Max 8x8 8 bus SP Filter Xover Cobra (Dante) 16x16 Power Amplifiers Console Max 6 DP-K1 Mixer Power Amplifiers Max 32in/out + 2in(console) 24 bus output Console output Mixer Power Amplifiers Power Amplifiers D-2000 bus Max 32in/out + 2in(console) 24 bus bus Mixers / DSP input input Digital Mixer / D-901 D-2000 TOA's Mixers and Digital Signal Processors at a glance and confirm parameter settings without requiring a PC • Ability to store up to 16 sound parameter setting configurations in memory for VCA Fader Unit Wireless Microphone Systems Speakers Mixers / DSP instant recall when required TOA's proprietary digital technology - Automatic Resonance Control (ARC) VCA fader unit for controlling 12 inputs/8 outputs, channel MeetingIO Series Automatically identifies room mode frequencies and Auto suppression of resonance applies an inverse response curve to compensate Specifications Power Source D-901 (US/314L)100-120V AC, 50/60Hz, (CE/315H)230V AC, 50/60Hz, (CE-GB)220-230V AC, 50/60Hz, (KR)220V, 60Hz for the measured room response. Power Consumption (US/314L)40W, (CE/315H/CE-GB)27W, (KR)26.94W Frequency Response 20 Hz – 20 kHz, ±1 dB (±4 dBu 1 Input) Input Max. 12 channels, modular construction (modules optional) Output Max. 8 channels, modular construction (modules optional) Signal Processing Feedback suppression function, audo mixing function(ducker, NOM attenuation), parametric equalizer, high-pass filter, lowpass filter, notch filter, all-pass filter, high shelving filter, low shelving filter, horn equalizer, crossover filter, compressor/auto-leveler, delay, matrix(12 x 8), Crosspoint gain measurement and setting. It can be easily done with Preset Memory 16 existing sound equipment and microphone. Auxiliary Function Protect function Control RS-232C, D-sub connector (9 pins), remote control module (option) Front Panel Section Preset memory recall key: 8, LCD screen, screen shift key (up/down/left/right), setting knob, Input level indicator: dual colour LED, output level indicator: dual colour LED, channel selector key: 12 (input channel selection), 8 (output channel selection), Channel volume control: 1 (input channel selection), 1 (output channel selection) Rear Panel Input module slot: 6 (input/output module slot: 2), Output module slot: 2, Remote control module slot: 1 Finish Panel: aluminum, hair-line finish, black / Others: pre-coated steel plate, black, 30 % gloss Dimensions (W x H x D) 482.6 x 132.6 x 320 mm (excluding projection), 3 units Weight 6.9 kg PC or any special microphone is unnecessary for Models with ARC: DP-K1, M-864D and M-633D INDEX Resonant frequency 37 Wired Microphones facilities with challenging acoustic environments. gains and 8 contact controls when used with the D984VC With the touch of a button 38 MeetingIO Series Wired Microphones that improves speech intelligibility and sound quality in When resonance occurs INDEX An advanced measurement and processing algorithm Digital Mixing System / D-2000 Series Cobra (Dante) 16x16 TCP/IP LPF PEQ HPF Comp Leveler Gate NOM Ducker Delay FBS Max 6 D-901 Max 12x8 1bus(mic) 12 PEQ HPF Comp Leveler Gate NOM Ducker 232C Effect FBS 3 Max 8x8 8 bus TCP/IP Comp Gate ARC Comp Delay Max 6 SP Filter Xover Comp Gate Delay Specifications D-2008SP Power Source (CU)120V AC, 60Hz, (CE)220-240V AC, 50/60Hz, (KR)220V AC, 60Hz Power Consumption (CE/KR)76W, (CU)78W Frequency Response 20 Hz – 20 kHz, ±1 dB (+4 dB Input) Sampling Frequency 48 kHz Inputs / Outputs Input: Max. 32 channels, modular construction (modules optional) Output: Max. 32 channels, modular construction (modules optional) Monitor bus; 1 stereo input, 1 stereo output, headphone: 1 stereo HPF Tone Signal Processing Feedback suppression function, auto mixing function(Ducker, NOM attenuation), auto mixing group, parametric equalizer high-pass filter, low-pass filter, notch filter, all-pass filter, high shelving filter, low shelving filter, horn equalizer, crossover filter, compressor/auto-leveler, output delay, BUS delay, matrix, CobraNet matrix, crosspoint gain 14x4 Console TCP/IP FBS ARC and function rooms, indoor sports facilities, multipurpose halls and places of worship andPEQmany others. 7 4 D-2008SP M-633D 5 12 Preset Memory 32 Auxiliary Functions D-2012C Key lock function 9x3 HPF FBS ARC LAN 10BASE-T/100BASE-TX,(Automatic-Negotiation) connected via a switching hub Network protocol: TCP/IP Connection cable: Shielded Category 5 or higher twisted pair LAN cable (CAT5-STP) Maximum cable distance: 100m (between D-2008SP and switching sub) 7 12 LPF PEQ HPF TCP/IP Max 8x8 232C LPF PEQ HPF Comp Leveler Comp LPF PEQ HPF Gate NOM Ducker 12 Comp Leveler Control Dimensions (W x H x D) RS-232C, D-sub connector (9 pins) used for external control, Module: Remote control module slot: 2 482 x 132.6 x 343.4 mm Weight 6.3 kg Specifications D-2012C Power Source (CE)220-240V AC, 50/60Hz, (KR)220V AC, 60Hz Power Consumption 18 W Volume Adjustment 100 mm motorized fader × 12, Rotary encoder x 8 Line Input 1 channel (stereo), +10 to -20 dBu, 10 kΩ, unbalanced, RCA Pin-jack Headphone Output Stereo 100 mW + 100 mW (32 Ω load), standard stereo phone-jack Monitor-Bus 1 stereo input, 1 stereo output LAN Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation) RJ45 connector, connected via a switching hub Network protocol: TCP/IP Connection cable: Shielded twisted pair (STP) Category 5 or higher LAN cable Maximum cable distance: 100 m (between D-2012C and switching sub) Control RS-232C: D-sub connector (9 pins) for maintenance use Dimensions (W x H x D) 482 × 266 × 138 mm Weight 6.6 kg Delay 12 With D-2012AS for desktop application Features • 32 preset memories for user convenience • Up to 32 different routing and parameter configurations can be stored for frequent changes in staging, seating and speaker arrangements • Intuitive GUI • Mixing console offers easy user operation • User-friendly VCA control *See page 41 for applicable modules. Stage right Wired Microphones Delay 12 10 M-9000M2 SP Filter Xover Mixers / DSP M-864D can be combined to create the best possible sound in small to medium-size venues of all types, including hotel banquet 2x6 Wireless Microphone Systems Delay Max 12 Max 18 peripherals that Expandable to a massive 128 input/output configuration, Max the12 D-2000 Series includes various modules and DP-SP3 Mixers / DSP SP Filter Xover 12 Filter Comp Max 24 Expandable all-in-one designs offering easy operation, DP-K1 advanced functions and system control capabilities Console SP Filter Xover Power Amplifiers Console output Stage microphone Stage microphone CD Player Paging microphone Satellite music Amp room 32 in D-2008SP D-2008SP Wireless Microphone Systems Power Amplifiers Mixer Power Amplifiers Max 32in/out + 2in(console) 24 bus bus Mixer Power Amplifiers input D-2000 Speakers Digital Mixing System / D-2000 Series Wired Microphones Speakers Mixers / DSP Recording Device Dante™-enabled model : Q-2008SPD D-2012C DANTE Controller Features 16 in/ 16 out • 16-ch Dante input/output as well as 32-ch analog audio input/output D-2012C + D-2012AS D-2008SP • Remote operation with exceptional transmission quality with near zero LAN (Control) CobraNet (Soundl) Audio mixing room INDEX MeetingIO Series DANTE Network 512ch SW HUB 39 latency between another Q-2008SPD and any other Dante compatible devices • Dante audio routing configurable on Dante Controller • A single D-2012C Mixer Console connectable per Q-2008SPD 40 INDEX MeetingIO Series SW HUB Mixers / DSP Console TCP/IP HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS ARC 7 12 Digital Matrix Mixer / M-9000M2 DP-SP3 2x6 LPF PEQ HPF TCP/IP input Mixer Power Amplifiers Power Amplifiers Mic/Line Input Modules (Monaural) D-2000 M-9000M2 D-2000AD1 D-921E D-921F • 4-channel, XLR connectors • A/D converter: 24 bit • Phantom power supply (48V) • THD: 0.008% or less • 2-channel, removable terminal block • A/D converter: 24 bit • Phantom power supply (15V) • THD: 0.05% or less • 2-channel, XLR connectors • A/D converter: 24 bit • Phantom power supply (15V) • THD: 0.05% or less D-922E D-922F • 2-channel, removable terminal block • A/D converter: 20 bit • Phantom power supply (15V) • THD: 0.05% or less • 2-channel, XLR connectors • A/D converter: 20 bit • Phantom power supply (15V) • THD: 0.05% or less Max 32in/out Max (console) + 2in 8x8 24 bus Console Cobra (Dante) 16x16 LPF PEQ HPF TCP/IP 232C Comp Leveler bus Gate Gate NOM NOM Ducker Ducker Delay 12 6 Max D-901 Max 12x8 1bus(mic) PEQ HPF FBS 232C Gate NOM Ducker Effect 3 Max 8x8 8 bus TCP/IP Filter Delay Comp Comp Leveler Delay Comp Delay Comp Gate Delay SP Filter Comp Delay LPF PEQ HPF Comp Leveler Delay Max 24 12 12 Comp Leveler LPF SP PEQ Filter HPF Xover Comp output 12 10 Unparalleled DSP mixer ideal for multi-zone paging, DP-K1 music distribution and room-combining applications. Console SP Filter Xover FBS 12 Comp Gate ARC Max 12 Max 12 SP Filter Xover Max 6 SP Filter Xover Max 18 M-864D 14x4 Console TCP/IP HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS ARC 7 12 M-633D 9x3 Mixers / DSP Mic/Line Input Modules (Stereo) Digital Input Module Digital Output Module D-936R D-923AE D-972AE • 4-channel, RCA pin jack • A/D converter: 24 bit • THD: 0.05% or less • 2-channel line input • Applicable format: AES/EBU • 4-channel line output • XLR connectors • Applicable format: AES/EBU DP-SP3 2x6 LPF PEQ HPF TCP/IP 10 M-9000M2 Features Max 8x8 232C LPF PEQ HPF Comp Leveler Gate NOM Ducker 12 Xover 12 12 • Easily configured custom systems with up to 8 mic/line inputs and 8 outputs. Power Amplifiers Digital Mixer / Modules for D-2000, D-901 and DP-K1 Mixer Power Amplifiers 9x3 Speakers M-633D Mixers / DSP Speakers 14x4 • Dual Channel Digital Signal Processor (DSP) on Input & Output channels • 32 x Paging memories Line Output Modules VCA Control Module • Four control inputs/Four control outputs D-984VC • 4-channel, XLR connectors • D/A converter: 24 bit • THD: 0.008% or less • 4-channel, XLR connectors • D/A converter: 24 bit • THD: 0.05% or less • Interface to D-911 Remote Controller • Eight RJ-45 conncectors • Control up to 12 inputs, 8 outputs D-971E D-971R • 4-channel, removable terminal block • D/A converter: 24 bit • THD: 0.05% or less • 4-channel, RCA pin jack • D/A converter: 24 bit • THD: 0.05% or less Remote Control Modules 41 Cross Point Settings EQ Settings Paging Settings Up to 32 preprogrammed broadcast patterns can be stored in the scene memory. Select from 3 types: LPF, HPF and PEQ. Up to 12 filters can be applied to each input-output channel. TOA’s Speaker preset EQ is visible in graphic display. Set 3-level prioritized paging for each activation trigger (up to 32) MeetingIO Series D-971M Wired Microphones • Up to 16 remote controllers can be connected D-2000DA1 CobraNet Interface Module D-981 D-983 D-2000CB • 8 inputs/8outputs • Removable terminal block connectors • 24 inputs/16 outputs • RJ45 connectors • Allows audio transmission among D-2008SPs 42 INDEX MeetingIO Series INDEX Wireless Microphone Systems downloading of settings using RS-232 connection. • 32 x Scene memories Wired Microphones Wireless Microphone Systems • Enhanced GUI programming interface for PC configuration and uploading/ • Two Balanced Mic / Line Inputs • Digital Signal Processing 10-Band Parametric EQ Bass / Treble • Loudness High and Low Pass Filters • Compressor • Adjustable Sensitivity (nine levels, -60 to -10 dBV) • Phantom Power (24 VDC) • Removable Terminal Block • Maximum four per chassis • Required for VOX function and input metering • Two RCA phone inputs per channel provides stereo summing • Digital Signal Processing 10-Band Parametric EQ Bass / Treble Loudness High and Low Pass Filters Compressor Telephone Zone Paging Module AN-001T ZP-001T • Automatically adjusts output gain to compensate for changes in ambient noise level • Each input can be assigned to control a specific output • Two inputs with +24VDC phantom power for condenser mics • 14 preset gain ratios • Accessory sensing microphone available, model AN-9001 • Maximum two per chassis • Telephone Paging to up to eight zones • Uses DTMF dialing to access outputs • Dial up to eight output zones in one operation • Analog extension or page port compatible • Page port operation requires contact closure activation • RJ-11 Telephone Jack and Removable Terminal Blocks • Maximum one per chassis Speakers M-9000M2 Power Source (CU)120V AC, 60Hz, (CE/CE-GB)220-240V AC, 50/60Hz Power Consumption 40 W Frequency Response 20 Hz – 20 kHz Audio Input Max. 8 channels, modular (modules optional) Audio Output Preamplifier outputs 1 and 2: 0 dBV, 600 Ω, balanced, removable terminal blocks (3-pins), max. 8 outputs Control Inputs and Outputs RS-232C, D-sub connector (9-pins), 4 control inputs and outputs each, remote volume control, removable terminal block Crosstalk > 64 dB (20 kHz) Signal Processing Tone control (bass, treble: ±12 dB), 10-bands parametric equalizer (31 steps, Q: 0,3 ...5), 10 speaker equalizer, high pass (-12 dB / Oct), low pass (-12 dB / Oct), Compressor (depth 1 to 5), Delay (0 ... 40 ms in 1ms steps), Scene/Event Memory 32 Auxiliary Function Key lock function Finish Front: Aluminum, black / Case: steel plate, black Dimensions (W x H x D) 420 x 107.6 x 353 mm Weight 6 kg (without modules) Optional Accessories Article number Wireless Microphone Systems Input/Output Control Module T-001T C-001T • Two Balanced Line Outputs • Digital Signal Processing 10-Band Parametric EQ Bass / Treble • Loudness High and Low Pass Filters Compressor TOA speaker EQ presets • Removable Terminal Block • Maximum three per chassis • Eight assignable control inputs for activating Event, Volume Up/Down, Mute, Power On/Off, Emergency Mute or Sync On/Off • Eight assignable control outputs for activating external relays • Removable Terminal Block • Maximum one per chassis • Six assignable buttons to activate preset selection or volume up/down • Operates on Remote Volume Control terminal on the 9000M2 back panel ZM-9001 Remote Panel • Four assignable buttons to activate preset selection or volume up/down • Variable knob to control volume • Operates on Remote Volume Control terminal on the 9000M2 back panel Article number Remote Control Panel Remote Panel Dual Line Output Expansion odule with DSP Power Amplifiers D-001R Specifications Mixer Power Amplifiers Line Input Module with DSP D-001T Ambient Noise Controller Module Mixers / DSP Mixer Power Amplifiers Power Amplifiers Dual Mic/Line Input Module with DSP Digital Matrix Mixer / M-9000M2 • Eight assignable buttons each with LED status indicator can control Xpoint settings (on/off, select), paging activation, scene and relay activation • Assignable ID rotary adjustment on box ZM-9013 Remote Control Panel ZM-9002 • Four assignable buttons each with LED status indicator can control Xpoint settings (on/off, select), paging activation, scene and relay activation • Assignable ID rotary adjustment on box Mixers / DSP Digital Matrix Mixer / Modules for M-9000M2 Wireless Microphone Systems Speakers Mixers / DSP ZM-9014 INDEX ZM-9003 AN-9001 Speaker Selector Remote Control Panel • Four assignable buttons each with LED status indicator can control Xpoint settings (on/off, select), paging activation, scene and relay activation • Assignable ID rotary adjustment on box • Ceiling or wall-mount condenser microphone • Fits one gang electrical box • Use with AN-001T module Wired Microphones • Allows use of up to 16 RS-485 remote control panels •Bi-directional RS-485 communication provides control and status feedback display for each remote function • Dual ports allows independent home runs for up to 8 modules each • 24V DC power adapter (optional AD-246) required for each 1 port used • May be used in any control option slot on 9000M2 mainframe in addition to a C-001T when spare slots are available Ambient Noise Sensing Microphone ZM-9011 • Switch up to four speaker lines on one amplifier output • Two amplifier inputs for Paging/ • BGM applications • Triggered by ZP-001T module control outputs • Wall-mount bracket included • Requires optional 24VDC power supply, model AD-246 SS-9001 MeetingIO Series RC-001T • Works with contact inputs on 9000M2 mainframe and on C-001T • Six buttons - 4 locking with label strips and two momentary buttons - may be assigned to control program change, volume up/down, channel on/mute, emergency mute, power and paging prohibit function. Remote Control Panel • Rotary Encoder can be assigned to control any input or output volume • Multiple input or outputs may be “ganged” for Master volume terminals • Multi-segment LED indicator provides visual volume level status 43 ZM-9012 44 INDEX RS-485 Control Modules MeetingIO Series Wired Microphones Remote Panel Power Amplifiers Max 2x6 12x8 1bus(mic) SP Filter Xover Comp Comp Gate ARC Max 12 Console TCP/IP Max 12 HPF Tone input Cobra (Dante) 16x16 Console TCP/IP LPF HPF PEQ HPF Comp Leveler Gate NOM Ducker Acoustic perfection at a touch TCP/IP 232C Console PEQ HPF Comp Leveler Gate NOM Ducker Effect 3 FBS PEQ 7 5 SP Filter Xover Comp Gate Mixer Power Amplifiers 232C TCP/IP Max 12x8 1bus(mic) Delay Max 18 TCP/IP ARC 7 12 12 FBS LPF PEQ HPF 12 10 SP Filter Xover Comp Max 32in/out 14x4 (console) + 2in 24 bus Delay ARC SP Filter 1212 Max Max 12 Xover Comp Delay Console Cobra (Dante) 16x16 TCP/IP PEQ Filter HPF Max 9x3 12x8 1bus(mic) TCP/IP HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS ARC 7 12 PEQ HPF Filter LPF HPF PEQ Tone HPF PEQ HPF Leveler Gate Delay FBS 12 Comp Leveler Gate NOM Ducker Effect FBS 232C input Comp Leveler Gate NOM Ducker FBS PEQ ARC 7 12 5 12 Max 2x6 8x8 8 bus TCP/IP Max 18 12 FBS ARC 7 12 12 SP Filter Xover Max 14x4 8x8 Console TCP/IP 232C Comp Delay Comp Comp Gate Delay Comp Leveler Delay SP Filter Comp Delay LPF PEQ HPF Comp Leveler Delay SP Filter Xover Max 6 FBS PEQ ARC LPF PEQ HPF 4 12 7 5 12 12 HPF FBS ARC 7 12 Gate NOM Ducker Delay Max 24 Max 12 Comp Leveler Comp Gate Delay 10 LPF HPF PEQ Tone HPF Delay Comp ARC Comp Gate Comp output Max 18 LPF PEQ HPF Filter Max 12 M-633D SP Filter Xover busMax 12 Effect Delay Max 6 ARC Delay SP Filter Xover Comp Gate Gate NOM Ducker Comp Max 24 12 Comp Leveler SP Filter Xover A fader-type Digital Stereo Mixer permitting analog-feel DP-SP3 DP-K1 parameter setting as well as PC or LAN operation. Console M-864D M-9000M2 Console Delay 3 M-864D 14x4 Gate NOM Ducker 4 6 Max 12 6 Max Filter PEQ Comp Leveler Max 12 M-633D D-901 8x8 Leveler NOM Gate HPF mixer isDucker 8 bus new-concept digital stereo clear, highly articulate sound. This next-generation unique. TCP/IP Max 24 Xover LPF PEQ HPF 3 output 12 FBS 232C Max 8x8 8 bus ARC bus Console Digital Mixer / M-864D DP-K1 With just the touch of a button,Max unpleasant reverberation and feedback to deliver LPF eliminates LPF Maxthe M-633D automatically Comp Gate Comp SP 8x8 Cobra (Dante) 16x16 Max 6 M-864D D-2000 Delay Console Max 6 M-9000M2 DP-K1 SP Filter Xover 1218 Max M-633D 9x3 DP-SP3 Features LPF PEQ HPF TCP/IP 2x6 Mixers / DSP Max 32in/out + 2in(console) 24 bus Delay • The M-633D features 6 monaural input s, 3 stereo input s, 2 monaural output s, 1 stereo output, and 1 stereo recording output. 10 9x3 Features SP Filter Xover 232C and there’s no need for complex PC settings. PEQ HPF Leveler Delay 12 • Ideal for medium-size places of worship and sports arenas M-9000M2 LPF • Provides automatic audio adjustment with to be aComp sound Gate technician to operate the M-633D, Maxpush-button ease. You don’t have 8x8 Comp Duck Ducker DP-SP3 • 15 input (8 x monaural and 7 x stereo ) and 5 output channels per unit 2x6 LPF PEQ TCP/IP HPF • Equipped with digital signal processing functions such as Automatic Resonance Control(ARC), Feedback Suppressor(FBS), 10 Automatic stereo input mute function (AUTO MUTE or Ducker) and Equalizer LPF PEQ HPF Xover • Advanced M-9000M2acoustic compensation can be automatically performed without using an acoustic measuring instrument Comp Leveler Delay 12 function, and an Automatic Clipguard function for enhanced sound 12 • Features an Automatic Resonance Control function, a Feedback Suppression intelligibility. LPF Max • Furnished with various function setting buttons and 14 analog volume 232C faders PEQ 8x8 HPF Comp Leveler Gate Duck Ducker • Can be operated without need for use of a PC, by connecting the PC, optional Remote control panel or via iPad app 12 Speakers Filter Max 6 DP-SP3 D-901 FBS 12 4 Max 32in/out 9x3 (console) + 2in 24 bus Effect D-901 TCP/IP Digital Mixer / M-633D M-864D M-633D D-2000 Gate NOM Ducker 12 12 Power Amplifiers Comp Leveler 3 Max 8x8 8 bus 14x4 PEQ HPF Mixer Power Amplifiers 232C Mixers / DSP DP-K1 Speakers Console Mixers / DSP Max 12x8 1bus(mic) • Packs all the necessary functions in a compact 1U size. Wireless Microphone Systems Functions Automatic Clipguard (ACG) The M-633D automatically suppresses sudden feedback that can occur when the person holding the microphone moves around. When the input sensitivity is set to either the MIC or PHANTOM position,the sensitivity is automatically switched to the line level in the presence of excessive input levels, thus preventing sound distortion. Specifications M-633D Power Source Power Consumption Frequency Response (CU)120V AC, 60Hz, (CE/CE-GB)220-240V AC, 50/60Hz, (KR)220V AC, 60Hza (CU)13W, (CE/CE-GB/KR)14W 20 Hz – 20 kHz Input 6 monaural input channels, selectable independently from 3 types of inputs for each channel: LINE, MIC or PHANTOM, LINE: -10 dBu, 2.4 kΩ, MIC: -46 dBV, 2.4 kΩ, PHANTOM: -46 dBV, 2.4 kΩ, supplies +24V DC / 10 mA, electronically balanced, removable terminal block (3 pins), phone jack, 3 stereo inputs (L, R): -10 dBV / 10 kΩ, RCA jack, stereo mini jack Output 2 monaural outputs: 0 dBV, electronically balanced, removable terminal block (3 pins) 1 stereo output (L, R): 0 dBV, electronically balanced, removable terminal block (3 pins) 1 stereo recording output (L,R): -10 dBV, RCA jack ZM-9011 ZM-9012 ZM-9014 Specifications M-864D Power Source (CU)100-120V AC, 60Hz, (CE/CE-GB)220-240V AC, 50/60Hz Power Consumption 30 W Frequency Response 20 Hz – 20 kHz, ±1 dB Sampling Frequency 48 kHz / 24 bits Distortion Crosstalk 0.03% or less, 1 kHz, +4 dBu input/output, 20 Hz – 20 kHz BPF -80 dB or less, 1 kHz Input 8 monaural input channels, removable terminal block (3P) • Phantom power (+24 V DC, 10 mA, ON/OFF switchable for each channel) • Gain setting (settable for each channel) 7 stereo input (L, R) channels (1-A, 1-B, 1-C, 2-A, 2-B, 2-C, front mounted input) RCA jack (stereo mini jack provided on the front panel) • -10 dBu (max. +10 dBu), 10 kΩ • Trim gain for each individual channel: -∞ to 0 dB (except front mounted input) Output 4 output channels, +4 dBu (max. +24 dBu), applicable load 600 Ω or more, electronically-balanced, removable terminal block (3P) 1 recording output (L, R) channel: -10 dBu (max. +10 dBu), applicable load 1 kΩ or more, RCA jack, gain is adjustable Contact Input 8 channels, open voltage: 24 V DC, short-circuit current: 5 mA, removable terminal block (10P) Contact Output 8 channels, no-voltage make contact, contact capacity: 24 V DC/100 mA, removable terminal block (10P) Signal Processing Automatic Resonance Control (ARC) Function, Feedback Suppressor Function, Filter: 8 channels (each monaural input channel), high-pass filter: 20 Hz – 20 kHz, Tone Controller: BASS, MID, TREBLE, Parametric Equalizer: 20 Hz – 20 kHz, ±15 dB, 4 channels (each output channel), Matrix: 12 x 4, Crosspoint Gain: -∞ to 0 dB in 1 dB steps, Auto Mute Function Network Network I/F: 1 channel of 10BASE-T/100 BASE-TX (auto-negotiation), RJ45 connector, connection via switching hub Network protocol: TCP/IP, Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN (Cat. 5-STP or better) Maximum cable length: 100 m (between M-864D and switching hub) Bus Line Distortion Sampling Frequency Signal Processing S/N Ratio Monaural channel x 2, stereo channel x 1 0.03% or less 48 kHz / 24 bits Automatic resonance control (ARC), feedback suppressor (FBS), automatic clipguard (ACG), automatic mute 90 dB or more (IHF-A weighted) Finish Front: Aluminum, black / Case: Precoated steel sheet, black Finish Panel: Aluminum, hairline, black / Case: Surface treated steel plate Dimensions (W x H x D) Weight 420 x 44 x 341.3 mm 4 kg Dimensions (W x H x D) 482.6 x 177.1 x 157.2 mm Weight 5.1 kg 45 ZM-9013 Wired Microphones Feedback Suppressor (FBS) An advanced measurement and processing algorithm improves speech intelligibility and sound quality in facilities with acoustically challenging environments. This function also automatically identifies room mode frequencies and applies an inverse response curve to compensate for the measured room response. 46 MeetingIO Series Automatic Resonance Control (ARC) INDEX INDEX MeetingIO Series Wired Microphones Wireless Microphone Systems Optional Remote Control Panels DP-K1 Max 8x8 8 bus TCP/IP Filter Comp Gate ARC Max 12 Mixers / DSP Max 12 SP Filter Xover Comp Gate Delay Max 18 Speaker Processor / DP-SP3 M-633D 9x3 HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS input Max 32in/out 2x6 (console) + 2in 24 bus Console Cobra (Dante) 16x16 TCP/IP LPF PEQ HPF Comp Leveler Gate NOM Ducker Max 6 M-9000M2 D-901 Max Max 12x8 8x8 1bus(mic) LPF PEQ PEQ HPF HPF Comp Leveler Gate Gate NOM NOM Ducker Ducker output 12 FBS LPF PEQ HPF 12 10 SP Filter Xover System Example A Comp Delay Comp Comp Leveler Delay 1224 Max LPF SP PEQ Filter HPF Switching hub Switching hub Creates richer, more vibrant sound environments by maximizing DP-K1 performance of each speaker in the system. the Console 232C 12 3 Max 8x8 8 bus TCP/IP Filter Effect FBS Xover Comp Gate ARC Max 12 SP Filter Xover Comp Gate Delay Max 18 M-864D 14x4 Console TCP/IP HPF Tone FBS PEQ ARC 4 7 5 12 HPF FBS ARC 7 12 Audio Audio Source Source M-864D M-864D LPF PEQ HPF TCP/IP • Digital Speaker Processor for clear, high-quality and realistic sound, with a full sense of presence 10 • Essential audio processing tools: Compressor, Parametric Equalizer, Output Delay and Mute M-9000M2 LPF • 10 filters on each input and 12 filters on Max each output Comp Gate 8x8 232C • Any combinations of parametric equalizer and high/low pass, and PEQ Leveler NOM high/lowHPF shelving filters,Ducker as well • 2 inputs & 6 outputs, processor can work with a 3-way multi-amp system as all-pass, notch filters and CD horn 12 SP Filter Xover Comp Delay System Example B 12 LPF Comp Delay PEQ Leveler HPF equalizer are possible Switching hub Switching hub 12 Wireless Microphone Systems Specifications DP-SP3 Power Source (CU)100-120V AC, 60Hz, (CE/CE-GB)220-240V AC, 50/60Hz Power Consumption 25 W Frequency Response 20 Hz – 20 kHz, ±1 dB Sampling Frequency 96 kHz/24 bits Dynamic Range Over 110 dB Distortion 0.03 % or less, 1 kHz, +4 dB input/output (20 Hz – 20 kHz BPF) Crosstalk -80 dB or less, 1 kHz Input 2 channels, +4 dBu (Max. +24 dBu), 10 kΩ, electronically-balanced, removable terminal block (3P) Output 6 channels, +4 dBu (Max. +24 dBu), applicable load 600 Ω or more, electronically-balanced, removable terminal block (3P) Equalizer/Filter Parametric equalizer: 20 Hz – 20 kHz, ±15 dB, Q: 0.267 – 69.249, Filter: High-pass filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct, Low-pass filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct, Notch filter: 20 Hz – 20 kHz, Q: 8.651 – 69.249, All-pass filter: 20 Hz – 20 kHz, Q: 0.267 – 69.249, High-shelving filter: 20 – 20 kHz, ±15 dB, Low-shelving filter: 20 – 500 Hz, ±15 dB, Horn equalizer: 20 kHz, 0 – 18 dB in 0.5 dB steps Crossover 2 ways, 3 ways, 4 ways, Crossover filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct, -15 to +12 dB, polarity switchable Delay: 0 – 170,656 ms in 0.01 ms steps Compressor Threshold: -20 to +20 dBu in 1 dB steps; Ratio: 1:1, 1.1:1,1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 7:1, 8:1, 10:1, 12:1, 20:1, ∞:1, Attack time: 0.2 ms – 5 s, Release time: 10 ms – 5 s Delay Delay time: 0 – 682.656 ms in 0.01 ms steps Matrix 2x6 Crosspoint Gain − ∞ to 0 dB in 1 dB steps Function Input PAD (-14dB) control, analog output attenuator (-∞ to 0 dB in 1 dB steps) control, EQ characteristic library for TOA speakers, input/output level indicator (4-point LED indicator), output MUTE switch x 6 Contact Inputs 4 channels, open voltage: 5 V DC, short-circuit current: 5 mA, removable terminal block (5P), control function: preset memory selection, volume control, and mute Network Network I/F: 1 channel of 10BASE-T/100 BASE-TX (auto-negotiation), RJ45 connector, connection via switching hub Network protocol: TCP/IP, Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN (Cat. 5-STP or better) Maximum cable length: 100 m (between DP-SP3 and switching hub) Finish Panel: Aluminium, hairline, black / Case: Surface-treated steel plate Mixers / DSP 2x6 PC PC Wireless Microphone Systems 9x3 2-way linkage with M-864D digital mixer’s preset switching possible. Wired Microphones DP-SP3 DP-SP3 Line Array Line Array Line Array Line Array Subwoofer Subwoofer Subwoofer Subwoofer M-633D DP-SP3 MeetingIO Series PC PC Max 6 12 12 Max 12 Features Mixers / DSP Delay bus Room A Room A Audio Audio Source Source M-864D M-864D Room B Room B Room C Room C Wired Microphones Mixer Power Amplifiers Power Amplifiers DP-SP3 D-2000 7 ARC Power Amplifiers TCP/IP Mixer Power Amplifiers Console Room D Room D MeetingIO Series Speakers 14x4 Speakers M-864D Dimensions (W x H x D) 482 x 44 x 289 mm 47 3.1 kg 48 INDEX INDEX Weight Max Max 32in/out 8x8 (console) + 2in 8 24bus bus Console Console 232C Cobra (Dante) 16x16 TCP/IP Comp Leveler Gate NOM Ducker Delay Max 6 FBS 12 PEQ HPF Comp Leveler 3 input LPF Filter PEQ HPF Comp Gate Leveler Gate NOM Ducker Effect Gate NOM Ducker Delay Max Max12 6 bus ARC 12 Max 12 Max 24 18 Max PEQ HPF HPF Tone Comp Leveler Gate NOM Ducker 4 3 Max 9x3 8x8 8 bus TCP/IP Comp Gate HPF Filter Effect FBS PEQ ARC SP Filter 7 12 5 12 FBS ARC Max 12 7 1212 Max HPF Tone FBS LPF PEQ HPF ARC 4 7 10 5 12 DP-SP3 M-864D 2x6 14x4 TCP/IP Console M-9000M2 M-633D Max 9x3 8x8 232C LPF HPF PEQ HPF Comp Leveler Gate NOM Ducker FBS 10 • Measurements can be made at up to 8 measurement points per area for finer M-9000M2 acoustic compensations Max • Essential audio processing tools -- compressors, gates, 8x8 LPF crossovers, multi-band 232C PEQ HPF parametric, high/low-pass, all-pass and notch filters, horn EQ, high/low shelving and output delay Comp filtering, Leveler SP Filter Xover Comp Gate Delay Xover SP Filter Comp Delay LPF PEQ HPF Comp Leveler 12 for zoning or room-combining • PC software for offsite programming and settings automatically adjusts the input signal level so it is appropriate at all times. BGM and announcements remain audible and understandable at all times, with no annoying loudness for customers and employees. Low ambient noise High ambient noise SP Filter Xover Sensing microphone Sensing microphone Amp Delay Output level down 12 Comp Delay 12 12 • Eight bus matrix allows flexible input-to-output signal routing output sound levels depending on the amount of surrounding noise, and an automatic level control (ALC) function that 12 LPF PEQ HPF Gate NOM Ducker Delay Max 18 12 LPF PEQ HPF Comp Max 6 ARC 7 TCP/IP Xover Mixer Power Amplifiers TCP/IP 232C Comp Leveler Delay Output level up Ambient Noise Control (ANC) ANC function automatically adjusts the vo l u m e l eve l o f a n n o u n c e m e n t s i n response to fluctuation of ambient noise. In addition, for complete accuracy, a DP-L2 feature exclusive to TOA automatically separates the unit’s own output from the calculation of the ambient sound level, instead of just mixing all sound sources together, meaning that the output is not detected as noise. Low ambient noise Mixers / DSP Mixers / DSP Delay Advanced Automatic Resonance Control (ARC) for Finer Acoustic M-633D DP-K1 Compensations Console 2x6 Wireless Microphone Systems Comp Comp Gate Automatic and Accurate Input and Output Sound Level Adjustment High ambient noise Sensing microphone Sensing microphone Amp Output level down Output level up Wireless Microphone Systems Max 14x4 12x8 1bus(mic) • One DP-K1 unit is capable of making acoustic adjustments for up to 8 broadcast areas See page 41 for applicable modules. Automatic Level Control (ALC) Dedicated software Wired Microphones SP Filter Xover Delay output Max 6 FBS Comp The DP-L2 is a digital audio processor with an ambient noise control (ANC) function that makes automatic changes in its M-864D D-901 12 MeetingIO Series Delay Ambient Noise Controller / DP-L2 SP Filter Xover Features DP-SP3 Specifications DP-K1 Power Source (CU) 100-120V AC, 50/60Hz, (CE/CE301/CE-GB) 230V AC, 50/60Hz Power Consumption 40 W Frequency Response 20 Hz – 20 kHz, ±1 dB (+4 dBu input) Inputs / Outputs Up to 8 channels, modular construction Equalizer / Filter Delay Parametric equalizer: 20 Hz – 20 kHz, ±12 dB, Q: 0,267 - 69,249 Filter: (total amount of filters depends on the number of input and output channels) High pass filter: 20 Hz – 20 kHz, 6 dB/Oct., 12 dB/Oct Low pass filter: 20 Hz – 20 kHz, 6 dB/Oct., 12 dB/Oct Notch filter: 20 Hz – 20 kHz, Q: 8,651 - 69,249 All pass filter: 20 Hz – 20 kHz, Q: 0,267 - 69,249 High shelving filter: 6 – 20 kHz, ±12 dB Low shelving filter: 20 – 500 Hz , ±12 dB Horn-Equalizer: 20 kHz, 0 to +18 dB (0.5 dB steps) Crossover filter: 20 Hz – 20 kHz, 6 dB/Oct, 12 dB/Oct, 18 dB/Oct, 24 dB/Oct (LR, BW, BE) threshold: -16 to +24 dB (1 dB steps); Ratio: 1:1, 2:1, 3:1, 4:1, 8:1, 12:1, 20:1, ∞:1 Attack time: 0.2 - 100 ms , Release time: 10 ms - 5 s Delay time: 0 - 682.0 ms (0.021 ms steps) Matrix / Gain control Matrix 8 × 8, Level control: -∞ to 0 dB (1 dB steps) Preset Memory Auxiliary Function Compressor Automatic level control function maintains input signal at a constant level by adjusting input signals to appropriate levels when the sound level is too low. Sound volume is controlled without losing nuances of speech or compromising background music sound quality. Mixer Amp Soft voice Optimal sound level DP-L2 Power Source (CU)110 – 120 V AC, 50/60 Hz, Loud (CE301/CE-GB/315H) 220 – 240 V AC, 50/60 Hz voice Power Consumption 20 W Sampling Frequency 48 kHz Frequency Response 20 Hz – 20 kHz, ± 1 dB Dynamic Range Over 108 dB (IHF-A weighted) Distortion < 0.006 %, 1 kHz, + 4 dB input/output (20 Hz – 20 kHz BPF) Input Sensor Input, Input 1 & 2 (removable terminal block) Output Monitor Output, Output 1 & 2 (removable terminal block 3 pins) 8 A/D, D/A Converter 24 bit Key lock function Signal Processing Automatic level control, ambient noise control, maximum output signal level control, input level indicator, output level indicator Phantom power switch (sensor input), key lock function, ground lift switch (INPUT 1, INPUT 2), input/output bypass function in power off Pre-coated steel plate, black, 30 % gloss 10 BASE-T/100 BASE-TX, Auto-negotiation, RJ45 connector Finish Front: Aluminum, hair-line, black / Others: pre-coated steel plate, black, 30 % gloss Finish Dimensions (W x H x D) 482.6 × 132.6 × 320 mm Dimensions (W x H x D) 482 x 44 x 303 mm Weight 7.4 kg Weight 49 Loud voice Specifications Other Features Network INDEX Comp Max 24 FBS 12 SP Filter Xover Speakers Max 12x8 1bus(mic) LPF PEQ HPF Power Amplifiers TCP/IP output Mixer Soft voice Wired Microphones Power Amplifiers Cobra (Dante) 16x16 Digital Audio Processor / DP-K1 D-901 DP-K1 D-2000 Mixer Power Amplifiers Console bus Amp MeetingIO Series Speakers Max 32in/out + 2in(console) 24 bus input Optimal sound level 3.7 kg 50 INDEX Mixers / DSP D-2000 Speakers Digital Wireless / TOA D5000 Series Digital Wireless / TOA D5000 Series Features TOA 5000 Series is the ultimate choice for the presenter, offering incredible intelligibility so your audience won’t miss a single word. You can be assured that with TOA‘s continuous commitment to research and development, we will always provide wireless solutions that allow your voice to be heard clearly by all. Power Amplifiers • Frequency channel scan • Feedback suppression • Built-in optimized preset equalization in microphones • Detachable antenna TOA Corporation Specifications are subject to change without notice. (1711)8336110043-00 Voice clarity and comfort for any speaking scenario • Audio mixing with cascading voice input connectivity Digital Wireless Receiver • Antenna mixing with cascading antenna connectivity WT-D5800 Features • Intuitive LCD display WT-D5800 Power Source AC mains (supplied AC adapter must be used) Current Consumption 350 mA (13.5 V) Receiving Frequency 606 - 636 MHz, 794 - 806 MHz or 794 - 832 MHz Channel Selectable 160 selectable frequencies • Signal stability is assured using the digital diversity method. Receiving System Double super-heterodyne • Control of peripherals is possible using contact output. Diversity system Space diversity (digital diversity) Mixing Output MIC/LINE (selectable): –60 dB* (MIC)/–20 dB* (LINE), 600 Ω phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced) Mixing Input –20 dB*, 10 kΩ, unbalanced, phone jack Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) Antenna Output 75 Ω, BNC (Gain 0 dB) Contact Output 1 channel, no-voltage make contact output, withstand voltage: 30 V DC, control current 0.5 A max terminal block (2 pins) Receiving Sensitivity 24 dBμV or less (Bit error rate: 1E-5 or less) Antenna Input Attenuator 0 dB/–10 dB switchable Indicator Audio (5 steps), RF (5 steps), ANT A/B, Audio (peak), Battery alarm Frequency Response 50 Hz - 12 kHz Total Harmonic Distortion 0.5 % or less Function Frequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone) ID Selectable 10 patterns Finish Resin, black Dimensions 210 (W) × 44 (H) × 211.9 (D) mm Weight 730 g Option Rack mounting bracket kit: MB- WT3 (for rack mounting one WT-D5800 unit) MB- WT4 (for rack mounting two WT-D5800 units) • Approx. 100 m operating range (line of sight) D5000 Advantages DSP for HIGH QUALITY SOUND and RELIABLE operation • Feedback Suppressor Wireless Microphone Systems optimizes audio characteristics for each model of handheld wireless microphone or any microphone connected to the belt-pack transmitter. automatically works to suppress acoustic feedback when the feedback occurs. SYSTEM DESIGN capability for SECURE and INTERFERENCE-FREE operation • CODE setting helps multichannel operation • Encryption setting prevents exposure of confidential info 607.100 MHz 607.100 MHz CODE: 1 Wired Microphones Output Proprietary Security ID SECURE 607.100 MHz Digital Wireless Microphone WM-D5200 WM-D5200 WT-D5800 607.100 MHz CODE: 2 607.100 MHz CODE: 1 • Antenna reception level check (Walk Test) using MeetingIO Series Maintenance Software Boardroom Muted Another room • Lightweight body Features WM-D5300 • Ultra slim and lightweight body • Dedicated rechargeable • Dedicated rechargeable (NiH2 = nickel-hydrogen) battery or 607.100 MHz Encryption setting prevents exposure of confidential info (NiH2 = nickel-hydrogen) battery or an AA alkaline battery can be used an AA alkaline battery can be used • 1 AA battery provides up to 8 hours • 1 AA battery provides up to 8 hours of continuous use • Visualize the level and frequency of undesired signals using Maintenance Software Digital Wireless Transmitter Features Wired Microphones Mixers / DSP • Microphone EQ Mixers / DSP • 15 compatible channels per 6 MHz, 20 compatible channels per 8 MHz TV channel Wireless Microphone Systems • Up to 32 simultaneous channels *Region dependent Mixer Power Amplifiers Specifications of continuous use • Selectable microphone sensitivity • Selectable microphone sensitivity • Selectable transmission output (1 mW/10 mW) • Selectable transmission output (1 mW/10 mW) • 3-step battery life indicator • 3-step battery life indicator • Built-in antenna Specificationsl WM-D5200 Microphone Element WM-D5300 Electret condenser unit: Unidirectional RF Carrier Power Less than 50 mW Audio Frequency Response Maximum Input Level MeetingIO Series Speakers Power Amplifiers Mixer Power Amplifiers Wireless Microphone Systems 100 Hz - 12 kHz 132 dB SPL (Sensitivity: L)/ 122 dB SPL (Sensitivity: H) Battery Life –18 dB* (Sensitivity: L)/ –28 dB* (Sensitivity: H) Approx. 8 hours Antenna Built-in type Lamda/4 whip antenna Finish Body: ABS resin, black, coating Head: steel, black, paint Body: ABS resin, black, paint Dimensions ø47 × 239.5 mm C04/C07 ver. : 62(W) x 171(H) x 19(D) mm G01 ver.: 62(W) x 185(H) x 19(D) mm Weight 220 g (with battery) 90 g (with battery) 51 52 INDEX INDEX *0dB = 1V 16 Channel Wireless Solution / TOA 5000 Series Speakers Speakers Wireless Microphone Systems 16 Channel Wireless Solution / TOA 5000 Series The Series lineup consists of microphones operating on a single battery, as well as microphones and a transmitter • Dynamic microphone unit: Unidirectional • 64 selectable channels • ON/OFF switch prevents the microphone from rolling • WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body • Built-in antenna Power Amplifiers • Dynamic microphone unit: Unidirectional • 64 selectable channels • Rolling stopper prevents the microphone from rolling • Single AA battery operation for more compact and light weight body • Built-in antenna WT-5810 Features Features Features • Up to 64 selectable frequencies (Up to 16 Simultaneous channels) • Frequency scan function • Adjustable 7-step squelch function • Supplied audio mixing input and audio mixing output • Antenna distribution output • Two-line LCD display • Indication of transmitter’s battery life • Half-rack size body • Up to 64 selectable frequencies (Up to 16 Simultaneous channels) • Frequency scan function • Adjustable 7-step squelch function • Supplied audio mixing input and audio mixing output • Two-line LCD display • Indication of transmitter’s battery life • Half-rack size body • Up to 16 selectable frequencies (Up to 16 Simultaneous channels) • Frequency scan function • Adjustable 7-step squelch function • Supplied audio mixing input and audio mixing output • Indication of transmitter’s battery life • Compact portable design WT-5800 WT-5805 Power Source Channel Selectable 64 channel capability (Max. 16 Simultaneous channels) Diversity System Space divercity (true diversity) Mixing Output Antenna Input Antenna Output WT-5810 AC mains (supplied AC-DC adapter must be used) MIC: –60dB*1, 600Ω, balanced, XLR-3-31 type connector LINE: –20dB*1, 600Ω, unbalanced, phone jack –20dB*1, 10 kΩ, unbalanced, phone jack 75Ω, BNC (Gain 0dB) — — Receiving Sensitivity 90dB or more, S/N ratio (20dBμV input, 40kHz deviation) Squelch Sensitivity Using together of noise SQ, carrier SQ and tone SQ Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), battery alarm S/N Ratio 110dB or more (A-weight, unbalanced output) Harmonic Distortion 1% or less (typical) Frequency Response 100 – 15kHz, ±3 dB Dimensions 210(W) × 44(H) × 205.1(D) mm Weight 700 g ANT A/B, Audio (peak), battery alarm 104dB or more (A-weight, unbalanced output) 206(W) × 40.6(H) × 152.7(D) mm WT-4820 • Up to 16 selectable frequencies (Up to 16 Simultaneous channels) • Modular dual channel receiver accepts up to two WTU-4800 Tuner Units • Supplied audio mixing input and audio mixing output • Antenna distribution output • Half-rack size body Tuner Unit WTU-4800 Features Features • Electret condenser microphone unit: Unidirectional • 64 selectable channels • ON/OFF switch prevents the microphone from rolling. • WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body • Built-in antenna • 64 selectable channels • Maximum input level: -14 dB to -29 dB • Built-in circuitry minimizes ambient noise effects • WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body • Connector for ø3.5 mini-plugs • Built-in antenna Specifications WM-5270 WM-5265 RF Carrier Power WM-5225 Oscillator PLL synthesizer Maximum Input Level 142 dB SPL 132 dB SPL 126 dB SPL Audio Input Connector — — — Audio Frequency Response 80Hz – 15kHz Battery Battery Life WM-5325 Less than 50mW (Factory preset 10mW ERP) -14dB to -29dB*1 (Audio level control: Min. to Max.) ø3.5mm (ø0.14") mini plug 100Hz – 15kHz 95dB or more (with WT-5800) AA alkaline dry cell battery Approx. 10h (when the alkaline battery is used) Indicator — WB-2000 (Ni-MH battery) orLR6(AA) Approx. 13h (when the WB-2000 rechargeable battery is used) Approx. 10h (when the alkaline battery is used)) Power/Battery lamps Dimensions ø48 × 244 mm ø50 × 229 mm ø43.6 × 231.5 mm 62 (W) × 102.5 (H) × 23 (D) mm Weight 340g (with battery) 205g (with battery) 180g (with battery) 90g (with battery) 590 g Features Receiver WM-5325 Dynamic Range (AF Circuit) 18 – 40dBμV variable Squelch System Beltpack Transmitter WM-5225 16 CH Space diversity 75Ω, BNC (phantom powering for antenna) 9V DC, 30mA (max.) Handheld Microphone Mixer Power Amplifiers Receiver WT-5805 Mixing Input Wireless Microphone Systems Features Mixers / DSP Mixer Power Amplifiers Mixers / DSP Receiver WT-5800 Specifications Wired Microphones Features range of applications, including museums, conferences and theaters, and enhances the Series' versatility and usability. Receiver MeetingIO Series WM-5265 Specifications WT-4820 Power Source AC Mains (supplied AC adapter must be used) Channel Selectablet 16 CH Mixing Input –20 dB*1, 10 kΩ, unbalanced, phone jack Antenna Input 75 Ω, BNC (phantom powering for antenna) 9 V DC, 30 mA (max.) Antenna Output 75 Ω, BNC (Gain 0dB) Indicator ANT A/B, Audio (peak), Power S/N Ratio 102 dB or more (A-weight, unbalanced output) Harmonic Distortion 1% or less Frequency Response 50 Hz - 18 kHz, ±3 dB Dimensions 210(W) × 44(H) × 181(D) mm Weight 770 g (without receiver unit) Wireless Lavalier Microphone WM-4300 Features • Unidirectional electret condenser microphone element • 64 selectable channels • Input sensitivity control included • Built-in circuitry minimizes ambient noise effects • Highly reliable TA-4 (XLR-type) mini-cannon microphone plug • Belt clip rotatable 360 degrees Specifications WM-4300 RF Carrier Power Less than 50mW (Factory preset 10mW ERP) Oscillator PLL synthesizer Maximum Input Level 120 dB SPL Battery 6LR61 (9 V × 1) Battery Life 10 hours (alkaline) Indicator Power/Battery indicator (common use) Dimensions 62 (W) × 142 (H) × 32 (D) mm Weight 135g (with battery) TOA 5000 Series Set WM-5225+WT-5810 Set WS-5225 WM-5265+WT-5810 Set WS-5265 WM-5325+YP-M5310+WT-5810 Set WS-5325M Wireless Microphone Systems the type of microphone best suited to their needs. The WT-5100 receiver, a new addition to the 5000 Series, expands the Handheld Microphone WM-5270 Wired Microphones The chargers are available in different capacities, while the transmitter is now a standalone unit, to allow users to select Handheld Microphone MeetingIO Series Power Amplifiers powered by rechargeable batteries. Battery chargers have also been added, for use with TOA-exclusive batteries. WM-5325+YP-M5300+WT-5810 Set WS-5325U WM-5325+WH-4000H+WT-5810 Set WS-5325H 53 54 INDEX INDEX *1 0dB=1V YP-M5310 The Trantec S5 and S4 Series is synonymous with quality among vocalists, musicians and theatrical performers. Additionally, presenters and the like also enjoy the wide variety of accessories that Trantec has to offer, allowing them to meet their professional needs. Headworn Microphone WH-4000H WH-4000A Receiver • Up to 1400 selectable frequencies (24 Simultaneous channels) • Unidirectional electret condenser microphone element • Connector for ø3.5 mini-plug • Omnidirectional electret condenser microphone element • Connector for ø3.5 mini-plug • Unidirectional electret condenser microphone • Interactive USB based computer control and monitoring for all aspects of performance • Unidirectional electret condenser microphone • Ideal for sports applications • Frequency scan function • Integral triple tone grip/noise and signal strength mute circuit for protection against external interference • Simple programming of transmitter with built-in Infra-red data link Antenna Distributor Rechargeable Battery WD-5800 WB-2000-2 • Clear and intuitive LCD display Wall Mount Antenna • Audio Low-cut, High-boost and phase reversal YW-4500 • Indication of transmitter’s battery life • Professional metal enclosure S5.5-RX Diversity System Receiving Sensitivity Space diversity (true diversity) Line: -22 dB*/ Mic: 62 dB* Line/Mic selectable, 600 Ω, balanced, XLR-3-32 type connector. Headphone: max. 100 mW 16 Ω, unbalanced, phone jack -28 dB*, 600 Ω, unbalanced, phone jack 0 dB V or less (12 dB SINAD) MB-WT3 MB-WT4 Squelch Sensitivity 6 - 36 dB V variable Squelch System Using together of noise SQ, carrier SQ and tone SQ Indicator LCD, Power lamp, Mute lamp, ANT A/B lamp S/N Ratio 110 dB or more (A-weight) Harmonic Distortion 1% or less (typical) Frequency Response 50 Hz - 20 kHz, ±3 dB Dimensions 210 (W) x 46 (H) x 210 (D) mm (excluding antenna) Weight 1.3kg TOA D5000 Series option Battery Charger AC Adapter BC-2000 Handheld Microphone AD-5000-2 Beltpack Transmitter S5.5-HDX (Dynamic) S5.5-HCX (Condenser) TOA 5000 Series options Battery Charger Battery Charger BC-5000-2 BC-5000-6 Battery Charger BC-5000-12 S5.5-BTX Features Features • Simple programming of transmitter with built-in Infra-red data link • Credit card size beltpack • Frequency & Power lock facility • Simple programming of transmitter with built-in Infra-red data link • Single AA operation of transmitters wit battery life of over 10 hours • Frequency & Power lock facility • Integral antenna • Clear and intuitive LCD display • Clear and intuitive LCD display • Single AA operation of transmitters with battery life of over 10 hours • Color coded ID band • Detachable antenna • Professional metal enclosure • Professional metal enclosure Specifications S5.5-HDX S5.5-HCX RF Carrier Power Modulation System Maximum Input Level AC Adapter AD-5000-2 AC Adapter AD-5000-6 Waist Pouch WH-4000P Windscreen WH-4000S S5.5-BTX Less than 50mW (Factory preset 10mW ERP) — 146 dB SPL (microphone sensitivity: Gain "0") Audio Frequency Response 60 Hz - 20 kHz Dynamic Range Audio Input Connector PLL synthesizer 142 dB SPL (microphone sensitivity: Gain "0") 120 dB SPL (microphone sensitivity: Gain "0") 90 Hz - 20 kHz — 110 dB or more (with S5.5-RX) — — TA-4 (Mini-XLR 4 pins) Battery LR6 (AA) Battery Life 10 hours (Alkaline) Indicator INDEX Wireless Microphone Systems MB-15B Rack Mount Bracket 55 Wired Microphones Mixers / DSP Wireless Microphone Systems Wired Microphones Rack Mount Bracket Mixers / DSP Specifications Audio Output Rack Mount Bracket MeetingIO Series Features S5.5-RX Mixer Power Amplifiers Headworn Microphone MeetingIO Series Power Amplifiers Mixer Power Amplifiers YP-M5300 Lavalier Microphone Power Amplifiers TRANTEC Wireless Microphone Systems S5 and S4 Series TOA D5000 Series/5000 Series common options Lavalier Microphone Speakers 24 Channel Wireless Solution / TRANTEC S5.5 Series Optional Accessories LCD, Power lamp, Mute lamp, ANT A/B lamp LCD display, Power lamp Dimensions ø50 x 247.9 mm ø50 x 232.9 mm 55 (W) x 80 (H) x 22 (D) mm Weight 380g (with battery) 300g (with battery) 140g (with battery) 56 INDEX Speakers Wireless Microphone Systems 12 Channel Wireless Solution / TRANTEC S5.3 Series Speakers Speakers Wireless Microphone Systems Multi-channel plug and play system / TRANTEC S4.10 Series S4.10-RXA S4.10-RX1 (Up to 16 Simultaneous channels) S4.10-RX2 • Frequency scan function Features • Infrared auto channel setup • Up to 640 selectable frequencies (12 Simultaneous channels) • Adjustable output level • USB based computer monitoring • Indication of transmitter’s battery life • Frequency scan function • Selectable from desk-top receiver (-RXA) and rack-mount receiver (-RX1/RX2) • Integral triple tone grip/noise and signal strength mute circuit for protection against external interference • Dual Channel Receiver (-RX2) available • Simple programming of transmitter with built-in Infra-red data link S4.10-RXA S4.10-RX1 Diversity Reception • Professional metal enclosure Frequency Range 506 - 937.5 MHz (*2), UHF Channel Selectable Specifications S5.3-RX Sensitivity Diversity System Space diversity (true diversity) Squelch (SQ) Audio Output Line: -22 dB*/ Mic: 62 dB* Line/Mic selectable, 600 Ω, balanced, XLR-3-32 type connector Headphone: max. 100 mW 16 Ω, unbalanced, phone jack -28 dB*, 600 Ω, unbalanced, phone jack Audio Frequency Response Receiving Sensitivity 0 dB V or less (12 dB SINAD) Audio Output Level (Maximum) Squelch Sensitivity 6 - 36 dB V variable Power Supply Squelch System Using together of noise SQ, carrier SQ and tone SQ Indicator LCD, Power lamp, Mute lamp, ANT A/B lamp S/N Ratio 110 dB or more (A-weight) Harmonic Distortion 1% or less (typical) Frequency Response 50 Hz - 20 kHz, ±3 dB Dimensions 210 (W) x 46 (H) x 210 (D) mm (excluding antenna) Weight 1.3kg (2.87lb) Up to 16 channels (Region dependent) 10uV at 45 dBA S/N Tone SQ, Carrier SQ, Noise SQ 50 Hz - 15k Hz Balanced (XLR socket) : -16 dBu Unbalanced (1/4” jack socket) : 10 dBu 11-18 VDC 300 mA 215 (W) x 39 (H) x 102 (D) mm (excluding antenna and BNC) Dimensions Weight 480g Beltpack Transmitter S5.3-BTX S4.10-BTX Features • Simple programming of transmitter with built-in Infra-red data link • Credit card size beltpack • Frequency & Power lock facility • Simple programming of transmitter with built-in Infra-red data link • Single AA operation of transmitters wit battery life of over 10 hours • Frequency & Power lock facility • Integral antenna • Clear and intuitive LCD display • Clear and intuitive LCD display • Single AA operation of transmitters with battery life of over 10 hours • Color coded ID band • Detachable antenna • Professional metal enclosure • Professional metal enclosure Specifications S5.3-HDX S5.3-HCX RF Carrier Power Maximum Input Level S5.3-BTX Less than 50mW (Factory preset 10mW ERP) Modulation System — 146 dB SPL (microphone sensitivity: Gain "0") Audio Frequency Response 60 Hz - 20 kHz Dynamic Range PLL synthesizer 142 dB SPL (microphone sensitivity: Gain "0") 120 dB SPL (microphone sensitivity: Gain "0") 90 Hz - 20 kHz — 110 dB or more (with S5.5-RX) — — TA-4 (Mini-XLR 4 pins) Battery LR6 (AA) Battery Life LCD display, Power lamp LCD display, Power lamp Dimensions ø50 x 247.9 mm ø50 x 232.9 mm 55 (W) x 80 (H) x 22 (D) mm Weight 380g (with battery) 300g (with battery) 140g (with battery) 57 Features • Handheld transmitter with dynamic cardioid microphone unit • Beltpack transmitter works with any Trantec microphone or alternatively a musical instrument cable • Adjustable microphone sensitivity • 1 AA battery provides up to 10 hours of continuous use • Numerical LED display • Integral switch for selection between instrument and microphone • Battery life indicator • Numerical LED display • Adjustable sensitivity • 3.5mm Screw Jack • Battery life indicator Specifications S4.10-HDX S4.10-BTX Frequency Range 506 - 937.5MHz, UHF Channel Selectable Microphone Element Up to 16 channels Dynamic with cardioid pattern RF Carrier Power Audio Frequency Response Audio Input Level 80 Hz - 15k Hz 50 Hz - 15k Hz 140 dBSPL (maximum) -6dBV (maximum), mic gain 0dB Modulation System PLL synthesizer Battery 1 AA size alkaline battery, 1.5 V Battery Life Approx. 10 hours Battery status LED, 7 segments LED Finish Dimensions Weight 10 mW Indicator 10 hours (Alkaline) Indicator Features • 1 AA battery provides up to 10 hours of continuous use Features 720 g Beltpack Transmitter S4.10-HDX (Dynamic) S5.3-HDX (Dynamic) S5.3-HCX (Condenser) 210(W) x 44(H) x 202(D) mm (excluding antenna) 680 g Handheld Microphone Handheld Microphone S4.10-RX2 Antenna Diversity Mixers / DSP Specifications • Indication of transmitter’s battery life Wireless Microphone Systems • Clear and intuitive LCD display Mixer Power Amplifiers • Numerical LED display Wired Microphones S5.3-RX • Up to 16 selectable frequencies Receiver MeetingIO Series Receiver Audio Input Connector INDEX Receiver Power Amplifiers Receiver Resin, coating Ø55 x 250 mm 62(W) x 100(H) x 25(D) mm (with clip) 245 g (with battery) 85 g (with battery) 58 INDEX MeetingIO Series Wired Microphones Wireless Microphone Systems Mixers / DSP Mixer Power Amplifiers Power Amplifiers Features Wireless Starter Pack / TRANTEC S4.04 Series Speakers Speakers Wireless Microphone Systems Trantec Optional Accessories for S4 Series MIC-LP2 for S4 Series MIC-SJ55 for S4 Series MIC-SJ690H S4.04-RX for S5 Series MIC-X690H Lavalier Microphone for S5 Series MIC-X212-BE (Beige) MIC-X212-BK (Black) for S4 Series MIC-SJ212-BE (Beige) • Up to 4 simultaneous channels • Adjustable output level • Frequency scan function • Indication of transmitter’s battery life • Infrared auto channel setup • Compact, portable design MIC-SJ212-BK (Black) Specifications S4.04-RX Diversity Reception Antenna Diversity Frequency Range 506 - 937.5 MHz (*1), UHF Channel Selectable 4 channels Sensitivity 10uV at 45 dBA S/N Squelch (SQ) Tone SQ, Carrier SQ, Noise SQ Audio Frequency Response Power Supply 50 Hz - 15k Hz Balanced (XLR socket) : -20 dBu Unbalanced (1/4" jack socket) : 10 dBu 11-18 VDC 300 mA Dimensions 215 (W) x 39 (H) x 102 (D) mm (excluding antenna and BNC) Weight 480g Headworn Microphone Headworn Microphone Headworn Microphone Headworn Microphone for S4 Series MIC-SJ33 MIC-X66-BL (Blue) MIC-X66-YE (Yellow) for S4 Series MIC-SJ66-BK (Black) MIC-SJ66-BL (Blue) MIC-SJ66-YE (Yellow) MIC-X22-P-R (Pink) for S4 Series MIC-SJ22-B-R (Black) MIC-SJ22-P-R (Pink) for S4 Series MIC-SJEM77 Antenna Distributor Antenna Booster Passive Antenna Splitter Directional Antenna Omnidirectional Antenna Wall Mount Antenna Receiver Antenna Receiver Antenna Whip Antenna Helical Antenna Antenna Extension Cable Antenna Extension Cable Guitar Cable TNC Rack Mount Panel Blank Panel Rack Mount Kit for S5 Series MIC-X66-BK (Black) for S5 Series MIC-X22-B-R (Black) for S5 Series MIC-XEM77 Mixers / DSP for S5 Series MIC-X33 Mixer Power Amplifiers • Numerical LED display Handheld Microphone Beltpack Transmitter YW-7000 ACC-SPLIT-2W YW-7570 S4.04-BTX Features Features • Handheld transmitter with dynamic cardioid microphone unit • Beltpack transmitter works with any Trantec microphone or • 1 AA battery provides up to 10 hours of continuous use alternatively a musical instrument cable • Numerical LED display • 1 AA battery provides up to 10 hours of continuous use • Battery life indicator • Integral switch for selection between instrument and microphone YW-7520 YW-4500 for S4.16 Series ANT-S4.16 RX-D/RX-G Wired Microphones S4.04-HDX (Dynamic) S5-ADU Wireless Microphone Systems TRANTEC Series Accessories for S5 Series ANT-S5 RX-D/RX-G • Numerical LED display • Adjustable sensitivity • 3.5mm Screw Jack • Battery life indicator S4.04-HDX S4.04-BTX Frequency Range 506 - 937.5MHz, UHF Channel Selectable Microphone Element Audio Input Level Dynamic with cardioid pattern 80 Hz - 15k Hz 50 Hz - 15k Hz -6dBV (maximum), mic gain 0dB PLL synthesizer 1 AA size alkaline battery, 1.5 V Battery Life Approx. 10 hours Indicator for S4 Series LD-SJ-JAC PAN-1U19-TNC MW-1U-BLANK for S5 Series ACC-S5RX-MB2 Battery status LED, 7 segments LED Finish 59 for S4 Series LD-TNC ADU - 140 dBSPL (maximum) Battery Weight for S5/S4 Series LD-BNC-TNC 10 mW Modulation System Dimensions for S4 Series ANT-S4 HDX-D/HDX-G 4 channels RF Carrier Power Audio Frequency Response ANT-S4 BTX-D/BTX-G MeetingIO Series Mixers / DSP Wireless Microphone Systems Wired Microphones Glasses Frame Microphone for S5 Series MIC-X55 Power Amplifiers Features Receiver Specifications MeetingIO Series Lavalier Microphone for S5 Series MIC-X2 Audio Output Level (Maximum) INDEX Lavalier Microphone Resin, coating Ø55 x 250 mm 62(W) x 100(H) x 25(D) mm (with clip) 245 g (with battery) 85 g (with battery) 60 INDEX Mixer Power Amplifiers Power Amplifiers TRANTEC Series Optional Microphones Unidirectional Microphone Features • Dynamic hand-held microphone for general use • Rigid diecast aluminum microphone body • Switching and handling noise suppression • 7.5 m phone plug cable supplied with unit • Microphone holder provided as standard accessory • Dynamic hand-held microphone for speech use • Rigid diecast zinc microphone body • Switching and handling noise suppression • 10 m phone plug cable supplied with unit • Microphone holder provided as standard accessory • Balanced output for long distance connection • Electret condenser microphone element for voice-oriented applications such as lectures, presentations and religious services • Designed for best performance when attached to the chest area • Capsule rotates 360 degrees, for optimal pickup even when worn on a lapel Speakers Gooseneck Microphone Unidirectional Microphone For EM-800 DM-1500 EM-800 Features Features Features • Dynamic hand-held microphone for vocal/speech use • Rigid diecast zinc microphone body • Switching and handling noise suppression • 10 m phone plug cable supplied with unit • Microphone holder provided as standard accessory • Balanced output for long distance connection • Suitable for vocal and speech application • Robust diecast zinc microphone body • Short type slide on/off switch reduces handling noise • XLR-connector (balanced) and 10m cable with phone plug • Adapter for stand mount is provided • Electret condenser microphone for such speech applications as meetings, lectures, and religious services • Excellent high-frequency response of 60 to 20k Hz delivers clear output • High sensitivity (-35dB) provides a satisfying tonal response • Gooseneck with two adjustment points allows more flexible microphone positioning angles • Rejection of undesirable off-axis sound minimizes possible feedback Specifications DM-1100 DM-1200 Type DM-1300 Directivity Rated Sensitivity 600 Ω, balanced –55 dB (1k Hz 0 dB = 1 V/Pa) Frequenc y Response 100 Hz – 12,000 Hz –56 dB (1kHz 0 dB = 1 V/Pa) 70 Hz – 15 kHz 155 g (without connection cable) 265 g (without connection cable) 245 g (without connection cable) 280 g (without connection cable) Dimensions (W x H x D) ø 55 x 178 mm Talk switch ø 39.5 x 163 mm ø 51 x 170 mm Specificationsl EM-410 Directivity Hyper-cardioid Rated Sensitivity –54 dB (1k Hz 0 dB = 1 V/Pa) 50 Hz – 12 kHz (With microphone stand: ST-800) Rated Impedance Unidirectional: Cardioid Rated Impedance 600 Ω, unbalanced Weight DM-1500 Moving coil microphone (Dynamic microphone) ST-800 ø 40.5 x 173 mm Short-off type, slide on/off switch Finish Body: Die cast aluminum, painted black Head: ABS resin, black/ zinc platedsteel wire, painted black Body: Die cast zinc, painted metallic gray Body: Die cast zinc, painted metallic gray Body: Die cast zinc, painted metallic gold Head: Die cast aluminum, zinc plated steel wire, Head: Aluminum, zinc plated steel wire, Head: Brass and zinc plated steel wire, painted metallic gray painted metallic gray painted metallic gold Standard accessory Microphone holder (W 5/16", W 5/8") Microphone holder (W 5/16", W 5/8", W3/8") Mixers / DSP Mixers / DSP Mixer Power Amplifiers Features DM-1300 Wireless Microphone Systems EM-410 Features Unidirectional Microphone EM-800 Cardioid 120 Ω, balanced –47 dB (1k Hz 0 dB = 1 V/Pa) Phantom power –35 dB (1kHz 0 dB = 1 V/Pa) 9-52V DC Frequency Response 100 Hz – 15kHz Output Connector Blanced-phone plug 60 Hz – 20kHz XLR-3-12 equivalent Finish Body: Copper alloy, black, semi-gloss, paint Body, Shaft: Copper alloy, black,semi-gloss, paint Dimensions ø8.9 × 28.6mm (cord excluded) ø12 × 420mm Weight 100g 135g Accessory Windscreen × 1, Clip Holder × 1 Windscreen × 1 INDEX MeetingIO Series Microphone holder (W 5/16") MeetingIO Series Wired Microphones Lavalier Microphone DM-1200 Wireless Microphone Systems DM-1100 Wired Microphones Unidirectional Microphone Condenser Microphones Power Amplifiers Dynamic Microphones 61 62 INDEX Speakers Power Amplifiers Mixer Power Amplifiers Wired Microphones Speakers Talk to your audience, not to the microphone. The AM-CF1 integrated audio collaboration system, the latest cutting edge meetingIO series product from TOA, is a The AM-1 Real-time Steering Array Microphone System is equipped with a built-in sensor to detect and track sound professional steerable microphone array system with integrated stereo soundbar. As such, AM-CF1 is the perfect all-in-one sources, and it captures voices clearly and continuously from either side, above or below. This frees speakers to move conferencing solution for small to medium size conference spaces with great return on investment. Built-in AEC (Acoustic back and forth in the vicinity of the podium, turn or tilt their heads to address different sections of the audience, or gesture Echo Cancellation), ANC (Ambient Noise Cancellation), and EQ maximize performance. Connectivity includes USB ports naturally without concern for the location of the microphone. Placed unobtrusively on top of the podium or pulpit, this for direct integration with computers and webcams, Bluetooth, codec input/output, and stereo audio input/output. LED innovative voice-tracking microphone completely eliminates the interference and inconvenience of gooseneck or handheld indicators identify presenter location and microphone gain level. It is truly real-time beam steering illuminated. Easy mikes. Intuitive parameter setting by iPad* adds further convenience. *iPad is a registered trademark of Apple Inc. installation. Available in black and white. PoE plus operation or power supply driven. Features Seven LED indicators behind the grille illuminate to visually track presenter location, display microphone gain level, and show microphone mute status. The browser interface is available to make adjustments to parameter settings such as mixer volume controls, audio processing, LED indicator management, control I/ O, presets, and voice tracking field adjustments for coverage within a 20 foot range. • Proven conferencing solution that’s also widely in houses of worship, higher education facilities, courtrooms, and theatrical venues across the country • Natural conversation without concern for speaker location or proper microphone usage • Natural reproduction of sound without accentuating ambient noise such as rustling of papers • Uninterrupted line of sight for video and other production related requirements • Easy installation and flexible placement including ceiling, wall, or tabletop applications • Presets for changing room configurations and meeting layouts • iPad app for intuitive set-and-forget configuration and ultimate real-time control in live production settings • User-friendly mute controls with clear status indication HDMI Audio out Webcam USB Audio in USB (Max. 200ft with STP) Codec in/out AM-CF1 3rd party controls Power Amplifiers Experience natural conversation across multiple locations Mixer Power Amplifiers Real-time Steering Array Microphone System / AM-1 Mixers / DSP Speakers Power Amplifiers Integrated Audio Collaboration System / AM-CF1 Mixers / DSP Mixer Power Amplifiers meetingIO Series iPad™ Power supply PC WiFi AC Adapter Audio Output AM-1B/AM-1W Power Source 24V DC (supplied from the Control Unit) Microphone Unidirectional electret condenser microphone Directivity Angle Horizontal 50° (800 Hz - 18 kHz, Array mode), 180° (Cardioid mode) Vertical: 90° Frequency Response 150 Hz - 18k Hz Specifications AM-CF1B Power Source 12 V DC (supplied from the specified AC adapter) or 52 V DC (supplied from the specified PoE extender) Maximum Input Sound Pressure 100 dB SPL Current Consumption Under 3.5 A Operation Mute switch Indicator Microphone status indicator (output: green, mute: red) Inputs USB Audio: 2 channels, USB 3.0/USB 2.0/USB 1.1 micro-B port Bluetooth: 2 channels, Codec: 1 channel, RCA pin jack, −10 dB*1, 10 kΩ, unbalanced type AUX: 2 channels, RCA pin jack, −10 dB*1, 10 kΩ, unbalanced type Microphone Cable Shielded twisted pair cable 10m (32.81 ft) with connector equivalent to TA-3 Maximum Cable Length 70 m (229.66 ft) (use of the AES\EBU cable) Finish Black or white (RAL9016 equivalent) Dimensions 483.9 (W) x 22.1(H) x 64.9 (D) mm excluding cable Weight 1.2 kg USB Audio: 2 channels, USB 3.0/USB 2.0/USB 1.1 micro-B port Bluetooth: 2 channels Codec: 1 channel, RCA pin jack, −10 dB*1, 600 Ω, unbalanced type AUX: 2 channels, removable terminal block (6 pins), 4 dB*2, 600 Ω, balanced (electronically-balanced) type Internal speaker: 2-way × 2 (woofer × 2, tweeter × 1) Control Inputs 2 inputs, removable terminal block (6 pins), no-voltage make contact Control Outputs 2 outputs, removable terminal block (6 pins), no-voltage make contact, relay contact output Network I/F 10BASE-T/100BASE-TX, RJ-45 Microphone Unidirectional electret condenser type Frequency Characteristics 20 Hz – 20 kHz (AUX IN – AUX OUT) Operation Section Power switch, Bluetooth pairing, Mute, Volume Up/Down Indicators Power (blue/green/orange/red), USB connection (green), Bluetooth (blue), Multifunction (green/red) Dimensions 799 (w) x 83.2 (h) x 85.5 (d) mm Weight 4.6 kg *1 0 dB = 1 V *2 0 dB = 0.775 V 63 Wired Microphones AM-CF1W Array Microphone Unit MeetingIO Series MeetingIO Series Control Unit Digital Mixer Outputs INDEX Wireless Microphone Systems SW HUB CAT 5 Control Unit Power Source 24V DC (supplied from an optional AC adapter) Current Consumption 410 mA or less Signal to Noise Ratio 90 dB or more Input Combined type of TA-3 (dedicated to the array microphone) Output Combined type of XLR-3-32, Removable terminal block (3 pins) Network Network I/F: 10 BASE-T/100BASE-TX, RJ-45 conncector Network protocol: TCP/IP, HTTP Level Control Output level selection (+4 dB*1, -10 dB*2, -50dB*1) LOW CUT ON/OFF Dimensions 210 (W) x 45.7 (H) x 271.5 (D) mm Weight 1.5 kg *1 0 dB = 1 V *2 0 dB = 0.775 V 64 INDEX Wired Microphones Wireless Microphone Systems Microphone Unit Bluetooth® 28 LD-TNC ADU 60 RC-001T 43 SR-FB3 20 WM-5270 54 A-5012 35 D-971R 41 FB-150W 09 HY-CN1B 12 M-633D 45 RC-03 36 SR-FB4 18 WM-5325 54 ACC-S5RX-MB2 60 D-972AE 41 H-1 30 HY-CN1BWP 12 M-864D 46 S4.04-BTX 59 SR-H2L 19 WM-D5200 52 ACC-SPLIT-2W 60 D-981 41 H-2 30 HY-CN1W 12 M-9000M2 44 S4.04-HDX 59 SR-H2S 19 WM-D5300 52 AD-5000-2 55 D-983 41 H-2WP 30 HY-CN1WWP 12 MB-15B 55 S4.04-RX 59 SR-H3L 19 WS-5225 54 AD-5000-6 55 D-984VC 41 H-3 30 HY-CN7B 11 MB-WT3 55 S4.10-BTX 58 SR-H3S 19 WS-5265 54 AM-1B 64 DA-250D 34 H-3WP 30 HY-CN7B-WP 11 MB-WT4 55 S4.10-HDX 58 SR-PB5 16 WS-5325H 54 AM-1W 64 DA-250DH 34 HB-1 30 HY-CN7W 11 MIC-LP2 60 S4.10-RX1 58 SR-PP4 18 WS-5325M 54 AM-CF1B 63 DA-250F 34 HS-1200BT 21 HY-CN7W-WP 11 MIC-SJ212-BE 60 S4.10-RX2 58 SR-RF12 05 WS-5325U 54 AM-CF1W 63 DA-250FH 34 HS-1200WT 21 HY-CW1B 12 MIC-SJ212-BK 60 S4.10-RXA 58 SR-RF12WP 05 WT-4820 53 AN-001T 43 DA-500F-HL 34 HS-120B 21 HY-CW1W 12 MIC-SJ22-B-R 60 S5-ADU 60 SR-RF8 06 WT-5800 53 AN-9001 44 DA-500FH 34 HS-120W 21 HY-CW1WP 12 MIC-SJ22-P-R 60 S5.3-BTX 57 SR-RF8WP 06 WT-5805 53 ANT-S4.16RX-D 60 DA-550F 34 HS-1500BT 21 HY-MS7B-WP 11 MIC-SJ33 60 S5.3-HCX 57 SR-S4L 17 WT-5810 53 ANT-S4.16RX-G 60 DM-1100 61 HS-1500WT 21 HY-MS7W-WP 11 MIC-SJ55 60 S5.3-HDX 57 SR-S4LWP 17 WT-D5800 52 ANT-S4BTX-D 60 DM-1200 61 HS-150B 21 HY-MT7 11 MIC-SJ66-BK 60 S5.3-RX 57 SR-S4S 17 WTU-4800 53 ANT-S4BTX-G 60 DM-1300 61 HS-150W 21 HY-PF1B 12 MIC-SJ66-BL 60 S5.5-BTX 56 SR-S4SWP 17 YP-M5300 55 ANT-S4HDX-D 60 DM-1500 61 HX-5B 10 HY-PF1W 12 MIC-SJ66-YE 60 S5.5-HCX 56 SR-SA3 20 YP-M5310 55 ANT-S4HDX-G 60 DP-K1 49 HX-5B-WP 10 HY-PF1WP 12 MIC-SJ690H 60 S5.5-HDX 56 SR-SA4 18 YS-60B 28 ANT-S5RX-D 60 DP-L2 50 HX-5W 10 HY-PF7B 11 MIC-SJEM77 60 S5.5-RX 56 SR-SB8 06 YW-4500 55,60 ANT-S5RX-G 60 DP-SP3 47 HX-5W-WP 10 HY-PF7W 11 MIC-X2 60 SR-A12L 05 SR-T5 16 YW-7000 60 BC-2000 55 EM-410 62 HX-7B 09 HY-RR1 25 MIC-X212-BE 60 SR-A12LWP 05 SR-TB3 20 YW-7520 60 BC-5000-12 55 EM-800 62 HX-7B-WP 09 HY-RR2 25 MIC-X212-BK 60 SR-A12S 05 SR-TB4 18 YW-7570 60 BC-5000-2 55 F-1000BT 26 HX-7W 09 HY-ST1 12 MIC-X22-B-R 60 SR-A12SWP 05 SR-TB4WP 18 ZM-9001 44 BC-5000-6 55 F-1000BTWP 26 HX-7W-WP 09 HY-ST7 11 MIC-X22-P-R 60 SR-A18B 05 SR-TP12 05 ZM-9002 44 BS-301B 32 F-1000WT 26 HY-1200HB 22 HY-TB1 25 MIC-X33 60 SR-C15B 06 SR-TP8 06 ZM-9003 44 BS-301W 32 F-1000WTWP 26 HY-1200HW 22 HY-TM7B-WP 11 MIC-X55 60 SR-C15BWP 06 SR-WB3 20 ZM-9011 44 C-001T 43 F-122C 25 HY-1200VB 22 HY-TM7W-WP 11 MIC-X66-BK 60 SR-C8L 06 SR-WB4 18 ZM-9012 44 D-001R 43 F-1300BT 27 HY-1200VW 22 HY-TR1 25 MIC-X66-BL 60 SR-C8LWP 06 SR-WB4WP 18 ZM-9013 44 D-001T 43 F-1300BTWP 27 HY-1500HB 22 HY-VM7B 11 MIC-X66-YE 60 SR-C8S 06 SS-9001 44 ZM-9014 44 D-2000AD1 41 F-1300WT 27 HY-1500HW 22 HY-VM7W 11 MIC-X690H 60 SR-C8SWP 06 ST-16A 28 ZP-001T 43 D-2000CB 41 F-1300WTWP 27 HY-1500VB 22 HY-W0801 22 MIC-XEM77 60 SR-CL8 06 ST-34B 20,22 D-2000DA1 41 F-1522SC 25 HY-1500VW 22 HY-W0801W 22 MT-200 12 SR-D8-M 15 ST-800 62 D-2008SP 40 F-2000BT 27 HY-60DB 11 HY-WM1B 12 MT-S0301 20 SR-D8-S 15 T-001T 43 D-2012C 40 F-2000BTWP 27 HY-60DB-WP 11 HY-WM1W 12 MT-S0601 16 SR-D8CL 15 WB-2000-2 55 D-901 38 F-2000WT 27 HY-AH1 25 HY-WM1WP 12 MW-1U-BLANK 60 SR-D8CS 15 WD-5800 55 D-921E 41 F-2000WTWP 27 HY-BC1 25 HY-WM2B 12 MX-6224D 36 SR-D8EP 15 WH-4000A 55 D-921F 41 F-2322C 25 HY-BH10B 28 HY-WM2W 12 PAN-1U19-TNC 60 SR-D8FB 15 WH-4000H 55 D-922E 41 F-2352C 25 HY-CL10B 28 HY-WM2WP 12 PE-304 31 SR-D8HB 15 WH-4000P 55 D-922F 41 F-2352SC 25 HY-CL20B 28 HY-WM7B 11 PE-64 31 SR-D8WB 15 WH-4000S 55 D-923AE 41 F-2852C 25 HY-CM10B 28 HY-WM7W 11 PJ-304 31 SR-EP3 20 WM-4300 54 D-936R 41 FB-120B 10 HY-CM10W 28 LD-BNC-TNC 60 PJ-64 31 SR-EP4 18 WM-5225 54 D-971E 41 FB-120W 10 HY-CM20B 28 LD-SJ-JAC 60 Q-2008SPD 40 SR-EP4WP 18 WM-5265 54 65 Speakers HY-CM20W Power Amplifiers 09 Mixer Power Amplifiers FB-150B Mixers / DSP 41 Wireless Microphone Systems D-971M Wired Microphones 35 MeetingIO Series A-5006 66 INDEX INDEX MeetingIO Series Wired Microphones Wireless Microphone Systems Mixers / DSP Mixer Power Amplifiers Power Amplifiers Speakers INDEX TOA Corporation Specifications are subject to change without notice. (1711)8336110043-00
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021