Cisco Aironet 3600 Series Access Point

Data Sheet
Cisco Aironet 3600 Series Access Point
®
Cisco Aironet 3600i Access Point
● Sleek design with internal antennas
● Ideal for office environments
Cisco Aironet 3600e Access Point
● Rugged metal housing and extended operating
temperature
● Ideal for factories, warehouses, and other
indoor industrial environments
● Versatile RF coverage with external antennas
● UL 2043 plenum-rated for above-ceiling
installation options or suspended from drop
ceilings
● Classify over 20 different types of interference,
including non-Wi-Fi interference within 5 to 30
seconds
● Automatic remedial action and less manual
intervention
Investment Protection with Modular
Architecture Design
● Flexible add-on Security Monitor Module with
future services and technologies options.
(Available Q1CY13)
Troubleshooting Forensics for Faster
Interference Resolution and Proactive Action
● Historic interference information for back-intime analysis and faster problem solving
Delivering up to three times more coverage versus
competition for tablets, smartphones and high
performance laptops, the industry’s only 4x4 MIMO,
3 spatial stream access point delivers mission
critical reliability. Current solutions struggle to scale
to meet demands on the wireless networks from
the influx of diverse mobile devices and mobile
applications. The new Cisco Aironet 3600 Series
sustains reliable connections at higher speeds
further from the access point than competing
solutions, resulting in up to three times more
availability of 450 Mbps rates, and optimizing the
performance of more mobile devices.
Cisco Aironet 3600 Series includes Cisco ClientLink 2.0 to boost
performance and range for clients and includes Cisco CleanAir
● 24/7 monitoring with remote access reduces
travel and speeds resolution
spectrum intelligence for a self-healing, self-optimizing network.
● Spectrum Expert Connect provides real-time,
raw spectrum data to help with difficult-todiagnose interference problems
RF Excellence
● The Air Quality Index in CleanAir provides a
snapshot of network performance and the
impact of interference
Robust Security and Policy Enforcement
Building on the Cisco Aironet heritage of RF excellence, the 3600
Series is a flagship access point, delivering industry-leading
performance for secure and reliable wireless connections.
● Industry’s first access point with non-Wi-Fi
detection for off-channel rogues
Enterprise-class silicon and optimized radios deliver a robust
● Supports rogue access point detection and
detection of denial-of-service attacks
mobility experience which includes:
● Management frame protection detects
malicious users and alerts network
administrators
● Set policies to prohibit devices that interfere
with the Wi-Fi network or jeopardize network
security
●
802.11n with 4x4 multiple-input multiple-output (MIMO)
technology with three spatial streams, which sustains 450
Mbps rates over a greater range for more capacity and
reliability than competing access points.
Secure Interoperability
● Controller-based deployment only
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 7
●
Cisco ClientLink 2.0 technology to improve downlink performance to all mobile devices including one-, two, and three spatial stream devices on 802.11n while improving battery life on mobile devices such as
smartphones and tablets.
●
Cisco CleanAir technology, which provides proactive, high-speed spectrum intelligence to combat
performance problems due to wireless interference.
●
Modular architecture design, enabling flexible add-on options for future services and technologies to be
tightly integrated with the wireless infrastructure.
●
MIMO Equalization optimized uplink performance and reliability by minimizing the impact of signal fade.
All of these features help ensure the best possible end-user experience on the wireless network.
Cisco also offers the industry’s broadest selection of 802.11n antennas delivering optimal coverage for a variety of
deployment scenarios.
Scalability
The Cisco Aironet 3600 Series is a component of the Cisco Unified Wireless Network, which can scale to up to
18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in
branch offices, and at remote sites. The Cisco Unified Wireless Network is the industry’s most flexible, resilient,
and scalable architecture, delivering secure access to mobility services and applications and offering the lowest
total cost of ownership and investment protection by integrating seamlessly with the existing wired network.
Product Specifications
Table 1 lists the product specifications for Cisco Aironet 3600 Series Access Points.
Table 1.
Product Specifications for Cisco Aironet 3600 Series Access Points
Item
Specification
Part Numbers
The Cisco Aironet 3600i Access Point: Indoor environments, with internal antennas
● AIR-CAP3602I-x-K9 - Dual-band controller-based 802.11a/g/n
● AIR-CAP3602I-xK910 - Eco-pack (dual-band 802.11a/g/n) 10 quantity access points
The Cisco Aironet 3600e Access Point: Indoor, challenging environments, with external antennas
● AIR-CAP3602E-x-K9 - Dual-band controller-based 802.11a/g/n
● AIR-CAP3602E-xK910 - Eco-pack (dual-band 802.11a/g/n) 10 quantity access points
®
Cisco SMARTnet Services for the Cisco Aironet 3600i Access Point with internal antennas
● CON-SNT-CAP362Ix - SMARTnet 8x5xNBD 3600i access point (dual-band 802.11 a/g/n)
● Qty(10) CON-SNT-CAP362Ix - SMARTnet 8x5xNBD 10 quantity eco-pack 3600i access point (dual-band 802.11a/g/n)
SMARTnet Services for the Cisco Aironet 3600e Access Point with external antennas
● CON-SNT-CAP3602x - SMARTnet 8x5xNBD 3600e access point (dual-band 802.11 a/g/n)
● Qty(10) CON-SNT-CAP3602x - SMARTnet 8x5xNBD 10 quantity eco-pack 3600e access point (dual-band
802.11a/g/n)
Cisco Wireless LAN Services
● AS-WLAN-CNSLT - Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT - Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT - Cisco Wireless LAN Performance and Security Assessment Service
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the
regulatory domain that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Software
Supported Wireless
LAN Controllers
Cisco Unified Wireless Network Software Release 7.2 or later.
● 2500 series, WLCM on SRE for ISR G2, WiSM2, 5500 Series, Flex 7500 Series
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 7
Item
Specification
Module Options
Security Monitor Module (Available in Q1 2013)
● Provides full spectrum, off channel scanning for comprehensive wIPS, CleanAir, Rogue Detection, Context Aware, and
Radio Resource Management (RRM) solution Scans 2.4 and 5 GHz channels while serving data clients on the base
dual band AP platform
● Power Requirements: Enhanced PoE, PoE+ (802.3at) or Power Injector
● Other Advanced Technology Modules coming soon
802.11n Version 2.0
(and Related)
Capabilities
● 4x4 multiple-input multiple-output (MIMO) with three spatial streams
● Maximal ratio combining (MRC)
● 802.11n and 802.11a/g beamforming
● 20- and 40-MHz channels
● PHY data rates up to 450 Mbps (40-MHz with 5 Ghz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS)
● Cyclic shift diversity (CSD) support
Data Rates
Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz and 5 GHz):
1
2
MCS Index
GI = 800ns
GI = 400ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
15
130
270
144.4
300
16
19.5
40.5
21.7
45
17
39
81
43.3
90
18
58.5
121.5
65
135
19
78
162
86.7
180
20
117
243
130
270
21
156
324
173.3
360
22
175.5
364.5
195
405
23
195
405
216.7
450
1
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the
coding rate, and data rate values.
2
GI: A guard interval (GI) between symbols helps receivers overcome the effects of multipath delays.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 7
Item
Specification
Frequency Band and
20-MHz Operating
Channels
A (A regulatory domain):
N (N regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 2.412 to 2.462 GHz; 11 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.825 GHz; 5 channels
Q (Q regulatory domain):
● 5.745 to 5.825 GHz; 5 channels
● 2.412 to 2.472 GHz; 13 channels
C (C regulatory domain):
● 5.180 to 5.320 GHz; 8 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.500 to 5.700 GHz; 11 channels
● 5.745 to 5.825 GHz; 5 channels
R (R regulatory domain):
E (E regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.180 to 5.320 GHz; 8 channels
● 5,660 to 5,805 GHz, 7 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels
I (I regulatory domain):
● 5.180 to 5.320 GHz; 8 channels
● 2.412 to 2.472 GHz, 13 channels
● 5.745 to 5.825 GHz; 5 channels
● 5.180 to 5.320 GHz; 8 channels
T (T regulatory domain):
K (K regulatory domain):
● 2.412 to 2.462 GHz; 11 channels
● 2.412 to 2.472 GHz; 13 channels
● 5.280 to 5.320 GHz; 3 channels
● 5.180 to 5.320 GHz; 8 channels
● 5.500 to 5.620 GHz, 7 channels
● 5.500 to 5.700 GHz, 8 channels
(excludes 5.600 to 5.640 GHz)
● 5.745 to 5.805 GHz, 4 channels
● 5.745 to 5.825 GHz; 5 channels
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain
that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Maximum Number of 2.4 GHz
Nonoverlapping
● 802.11b/g:
Channels
◦ 20 MHz: 3
5 GHz
● 802.11a:
◦
● 802.11n:
◦
20 MHz: 21
● 802.11n:
20 MHz: 3
◦
20 MHz: 21
◦
40 MHz: 9
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Receive Sensitivity
● 802.11b (CCK)
● 802.11g (non HT20)
● 802.11a (non HT20)
◦
-101 dBm @ 1 Mb/s
◦
-91 dBm @ 6 Mb/s
◦
-90 dBm @ 6 Mb/s
◦
-98 dBm @ 2 Mb/s
◦
-91 dBm @ 9 Mb/s
◦
-90 dBm @ 9 Mb/s
◦
-92 dBm @ 5.5 Mb/s
◦
-91 dBm @ 12 Mb/s
◦
-90 dBm @ 12 Mb/s
◦
-89 dBm @ 11 Mb/s
◦
-90 dBm @ 18 Mb/s
◦
-89 dBm @ 18 Mb/s
◦
-87 dBm @ 24 Mb/s
◦
-86 dBm @ 24 Mb/s
◦
-85 dBm @ 36 Mb/s
◦
-83 dBm @ 36 Mb/s
◦
-80 dBm @ 48 Mb/s
◦
-78 dBm @ 48 Mb/s
◦
-79 dBm @ 54 Mb/s
◦
-77 dBm @ 54 Mb/s
2.4-GHz
● 802.11n (HT20)
5-GHz
● 802.11n (HT20)
5-GHz
● 802.11n (HT40)
◦
-90 dBm @ MCS0
◦
-91 dBm @ MCS0
◦
-88 dBm @ MCS0
◦
-90 dBm @ MCS1
◦
-90 dBm @ MCS1
◦
-87 dBm @ MCS1
◦
-90 dBm @ MCS2
◦
-89 dBm @ MCS2
◦
-86 dBm @ MCS2
◦
-88 dBm @ MCS3
◦
-86 dBm @ MCS3
◦
-82 dBm @ MCS3
◦
-85 dBm @ MCS4
◦
-83 dBm @ MCS4
◦
-80 dBm @ MCS4
◦
-80 dBm @ MCS5
◦
-78 dBm @ MCS5
◦
-75 dBm @ MCS5
◦
-78 dBm @ MCS6
◦
-77 dBm @ MCS6
◦
-73 dBm @ MCS6
◦
-77 dBm @ MCS7
◦
-75 dBm @ MCS7
◦
-72 dBm @ MCS7
◦
-90 dBm @ MCS8
◦
-91 dBm @ MCS8
◦
-88 dBm @ MCS8
◦
-90 dBm @ MCS9
◦
-89 dBm @ MCS9
◦
-86 dBm @ MCS9
◦
-89 dBm @ MCS10
◦
-87 dBm @ MCS10
◦
-84 dBm @ MCS10
◦
-86 dBm @ MCS11
◦
-84 dBm @ MCS11
◦
-80 dBm @ MCS11
◦
-82 dBm @ MCS12
◦
-80 dBm @ MCS12
◦
-77 dBm @ MCS12
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 7
Item
Maximum Transmit
Power
Specification
◦
-78 dBm @ MCS13
◦
-76 dBm @ MCS13
◦
-73 dBm @ MCS13
◦
-77 dBm @ MCS14
◦
-75 dBm @ MCS14
◦
-71 dBm @ MCS14
◦
-75 dBm @ MCS15
◦
-73 dBm @ MCS15
◦
-70 dBm @ MCS15
◦
-90 dBm @ MCS16
◦
-90 dBm @ MCS16
◦
-87 dBm @ MCS16
◦
-89 dBm @ MCS17
◦
-88 dBm @ MCS17
◦
-84 dBm @ MCS17
◦
-87 dBm @ MCS18
◦
-85 dBm @ MCS18
◦
-82 dBm @ MCS18
◦
-84 dBm @ MCS19
◦
-82 dBm @ MCS19
◦
-78 dBm @ MCS19
◦
-81 dBm @ MCS20
◦
-79 dBm @ MCS20
◦
-75 dBm @ MCS20
◦
-76 dBm @ MCS21
◦
-74 dBm @ MCS21
◦
-71 dBm @ MCS21
◦
-75 dBm @ MCS22
◦
-73 dBm @ MCS22
◦
-69 dBm @ MCS22
◦
-74 dBm @ MCS23
◦
-72 dBm @ MCS23
◦
-68 dBm @ MCS23
2.4 GHz
● 802.11b
◦
◦
23 dBm - 4 Antennas
● 802.11n (HT20)
◦
23 dBm - 4 Antennas
● 802.11n (HT20)
◦
● 802.11a
23 dBm - 4 Antennas
● 802.11g
◦
5 GHz
23 dBm - 4 Antennas
● 802.11n (HT40)
◦
23 dBm - 4 Antennas
23 dBm - 4 Antennas
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Available Transmit
Power Settings
2.4 GHz
5 GHz
● 23 dBm (200 mW)
● 23 dBm (200 mW)
● 20 dBm (100 mW)
● 20 dBm (100 mW)
● 17 dBm (50 mW)
● 17 dBm (50 mW)
● 14 dBm (25 mW)
● 14 dBm (25 mW)
● 11 dBm (12.5 mW)
● 11 dBm (12.5 mW)
● 8 dBm (6.25 mW)
● 8 dBm (6.25 mW)
● 5 dBm (3.13 mW)
● 5 dBm (3.13 mW)
● 2 dBm (1.56 mW)
● 2 dBm (1.56 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
Integrated Antenna
● 2.4 GHz, Gain 2 dBi, internal Omni, horizontal beamwidth 360°
● 5 GHz, Gain 5 dBi, internal Omni, horizontal beamwidth 360°
External Antenna
(Sold Separately)
● Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz).
Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Cisco offers the industry's broadest selection of 802.11n antennas delivering optimal coverage for a variety of
deployment scenarios.
● Management console port (RJ-45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
(W x L x H)
● Access point (without mounting bracket): 8.7 x 8.7 x 2.11 in. (22.1 x 22.1 x 5.4 cm)
Weight
● 2.5 lbs (1.13 kg)
Environmental
Cisco Aironet 3600i
● Nonoperating (storage) temperature: -22 to 158°F (- 30 to 70°C)
● Nonoperating (storage) Altitude Test - 25˚C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test - 40˚C, 9843 ft.
Cisco Aironet 3600e
● Nonoperating (storage) temperature: -22 to 158°F (- 30 to 70°C)
● Nonoperating (storage) Altitude Test - 25˚C, 15,000 ft.
● Operating temperature: -4 to 131°F (-20 to 55°C)
● Operating humidity: 10 to 90 percent (noncondensing)
● Operating Altitude Test - 40˚C, 9843 ft.
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 7
Item
System Memory
Specification
● 256 MB DRAM
● 32 MB flash
Input Power
Requirements
● AP3600: 44 to 57 VDC
Powering Options
● 802.3af Ethernet Switch
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
● Cisco AP3600 Power Injectors (AIR-PWRINJ4=)
● Cisco AP3600 Local Power Supply (AIR-PWR-B=)
Power Draw
● AP3600: 12.95 W
Note: When deployed using Power over Ethernet (PoE), the power drawn from the power sourcing equipment will be
higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as
2.45W, bringing the total system power draw (access point + cabling) to 15.4W.
Warranty
Compliance
Standards
Limited Lifetime Hardware Warranty
◦
UL 60950-1
◦
CAN/CSA-C22.2 No. 60950-1
◦
UL 2043
◦
IEC 60950-1
◦
EN 60950-1
◦
EN 50155
● Radio approvals:
◦
FCC Part 15.247, 15.407
◦
RSS-210 (Canada)
◦
EN 300.328, EN 301.893 (Europe)
◦
ARIB-STD 66 (Japan)
◦
ARIB-STD T71 (Japan)
◦
EMI and susceptibility (Class B)
◦
FCC Part 15.107 and 15.109
◦
ICES-003 (Canada)
◦
VCCI (Japan)
◦
EN 301.489-1 and -17 (Europe)
◦
EN 60601-1-2 EMC requirements for the Medical Directive 93/42/EEC
● IEEE Standard:
◦
IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d
● Security:
◦
802.11i, Wi-Fi Protected Access 2 (WPA2), WPA
◦
802.1X
◦
Advanced Encryption Standards (AES), Temporal Key Integrity Protocol (TKIP)
● EAP Type(s):
◦
Extensible Authentication Protocol-Transport Layer Security (EAP-TLS)
◦
EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2)
◦
Protected EAP (PEAP) v0 or EAP-MSCHAPv2
◦
Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦
PEAPv1 or EAP-Generic Token Card (GTC)
◦
EAP-Subscriber Identity Module (SIM)
● Multimedia:
◦
™
Wi-Fi Multimedia (WMM )
● Other:
◦
FCC Bulletin OET-65C
◦
RSS-102
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 7
Limited Lifetime Hardware Warranty
The Cisco Aironet 3600 Series Access Point comes with a Limited Lifetime Warranty that provides full warranty
coverage of the hardware for as long as the original end user continues to own or use the product. The warranty
includes 10-day advance hardware replacement and ensures that software media is defect-free for 90 days. For
more details, visit: http://www.cisco.com/go/warranty.
Cisco Wireless LAN Services
Realize the full business value of your technology investments faster with intelligent, customized services from
Cisco and our partners. Backed by deep networking expertise and a broad ecosystem of partners, Cisco Wireless
LAN Services enable you to deploy a sound, scalable mobility network that enables rich media collaboration while
improving the operational efficiency gained from a converged wired and wireless network infrastructure based on
the Cisco Unified Wireless Network. Together with partners, we offer expert plan, build, and run services to
accelerate your transition to advanced mobility services while continuously optimizing the performance, reliability,
and security of that architecture after it is deployed. For more details, visit:
http://www.cisco.com/go/wirelesslanservices.
For More Information
For more information about the Cisco Aironet 3600 Series, visit http://www.cisco.com/go/wireless or contact your
local account representative.
Printed in USA
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-686782-03
05/12
Page 7 of 7