Omnikey Card Encoder Module

Printer option – Dual smart contact & contactless
card encoding
OMNIKEY CardMan 5121
The OMNIKEY 5121 is a dual interface PC-linked reader that will read/write to
both a 13.56 MHz RFID contactless smart card and virtually any contact smart
card. The dual interface feature economically supports end-user environments
where both contactless and contact smart card technology may be in use.
The OMNIKEY 5121 is based on a 13.56 MHz contactless smart card RFID
interface that is compliant with ISO specifications 14443 A & B and ISO
15693.
Target Markets
Security
Education
ePayment
ePurse
Access Control
Supported Printers
- Factory mounted
Zenius Expert
Primacy
Pebble4
Dualys3
Securion
Quantum2
ELypso
- On-site upgrade
Quantum2
Software & SDK
PC/SC Software and
dev. kit free of charge
PC requirements
USB connector
The reader works with a variety of 13.56 MHz contactless smart cards
including, but not limited to:
Philips: MIFARE®, DESFire®, MIFARE ProX®, and i.code
HID: iCLASS®
Texas Instruments: TagIT®
ST Micro: x-ident, SR 176, SR 1X 4K
Infineon: My-d (in secure mode UID only)
Atmel: AT088RF020
KSW MicroTech: KSW TempSens
OMNIKEY’s contact smart card reader with USB interface, complies with
major standards such as ISO 7816, PC/SC, Microsoft WHQL, and EMV 2000
Level 1 specifications is guaranteed.
OMNIKEY CardMan 5121
HOST INTERFACE
USB 2.0 CCID1 (also supports 1.1)
Transmission speed : 424 kbps
Power supply : Bus powered
CONTACTLESS
SMART CARD STANDARDS
ISO 14443 A
ISO 14443 B
ISO 15693
CONTACT
SMART CARD STANDARDS
Compliant with ISO 7816 and EMV 2000 Level 1
Supports T=0, T=1
Supports 2-wire: SLE 4432/42 (S=10)
3-wire: SLE4418/28 (S=9)
Supports I²C (S=8)
Automatic detection of smart card type
SUPPORTED CARDS
Philips: MIFARE®, DESFire®, MIFARE ProX®, and i.code
HID: iCLASS®
Texas Instruments: TagIT®
ST Micro: x-ident, SR 176, SR 1X 4K
Infineon: My-d (in secure mode UID only)
Atmel: AT088RF020
KSW MicroTech: KSW TempSens
COMMUNICATION
PROTOCOL
Microsoft® WHQL certified
EMV 2000 Level 1 certified
ISO 7816
HBCI
USB 1.1 and 2.0
CCID (contact interface only)
API
PC/SC driver
CT-API (on top of PC/SC - for contact interface)
OCF (on top of PC/SC - for contact interface)
Synchronous API (on top of PC/SC - for contactless interface)
OPERATING SYSTEMS
Windows® 2000, 2003 Server, XP, Vista 32/ 64 bits, 7, Win CE 5.0 &
CE.NET
MAC® OS X: 10.5 & 10.6 on Intel (for contact interface only)
Linux®
Data source: HID website : Omnikey Datasheet (July 2012)
Specifications and details are subject to change without notice and should therefore be confirmed by Evolis prior to any purchase.
© Evolis March 2013. KB-094—ENG-A4 Rev A0