Catalog
Warning
Signal
Backup
Marker and Clearance
Beacons
License Plate
Interior
LED
Why Buy LED School Bus Lights?
The primary mission of
SoundOff Commercial
Vehicle Products is to
provide the highest
margin of safety for
school bus passengers.
Here area few key
reasons why we believe
LED lighting should be
considered for your fleet.
Reduce “Drive-Bys” Other motorists see LED lights
before they see incandescent
lights. This mean motorists have more time to slow down and stop for your bus. A study from the University of Michigan concluded that the reaction time for the average driver is at least 250
milliseconds faster when viewing LED verses incandescent lights, which translates to an additional 22 feet of stopping distance.
Benefits of LED
School Bus Lights
► Cost associated with repairs: $3,502.35
Reliable LED lights are designed for all weather conditions with advanced optics for maximum light output.
Low Amp Draw Low amp draw also means you can install other safety systems, like our Bus Light Monitor,
anti-theft devices or Ignition
Security System.
► Total cost associated with replacing Increased Visibility Reduce Wear and Tear Low-voltage LED lights reduce wear and tear on your electrical systems—stop replacing
expensive batteries, alternators and switches.
Low Maintenance
Keep your buses on the road where they should be; SoundOff Commercial Vehicle products LED lights are designed for years of maintenance-free service to last the lifetime of your bus.
Contrast this with expensive,
on-going service costs required 1
with incandescent lighting.
A study conducted by the Warren County,
KY School District highlights the extensive
costs of replacing incandescent bulbs.
Their study was conducted over a one-year
period with a fleet of 216 buses:
► Buses brought into shop for
incandescent lighting repairs: $9,900.70
► Road calls: $714.20
► Lamps installed: $419.67
► Materials and service calls: $390.95
incandescent lighting: $14,927.87
When you fully take into consideration the
materials and fuel, plus the salaries and
benefits of the technicians and bus
drivers involved, the annualized “hidden”
true costs of servicing an incandescent
bus fleet is substantially greater that what’s
listed above, not to mention the disruptions
involved from unplanned maintenance.
Extensive maintenance costs can be
eliminated by simply switching to LED
lights from SoundOff. Our LED lighting
products offer a bumper-to-bumper
five-year guarantee, backed by the
best service in the business.
Protecting What
is Most Important
Each day, approximately 475,000 school buses carry 25 million children to and from school, rarely with any
serious incidents.
As a recognized industry leader, SoundOff Commercial Vehicle Products is solely focused on engineering
Our mission is to advocate safety and protect what is most important to our future: the next generation.
School Bus LED Lighting Specifications
Side and Interior.................................................1
150 Series Compact Design............................ 17
Front and Rear....................................................2
350 Series........................................................... 18
LED Warning Lights
7” Round.............................................................3
Signal Lights
7” Round Stop/Tail/Turn.....................................4
7” Round Rear Turn............................................5
7” Round Rear Turn with Arrow.........................6
7” Front/Park/Turn..............................................6
520 Series........................................................... 19
06 Oval Mid-Turn.............................................. 20
Turn Signal Markers........................................... 21
Beacons
3000 Series Strobe............................................. 22
4100 Series Strobe............................................. 23
4700 Series LED................................................. 24
5.25” x 8.5” C2 Rectangular..............................7
License Plate Lights
4” Round Stop/Tail/Turn.....................................8
Combo.............................................................. 25
4” Round Turn Signal..........................................9
Compact.......................................................... 26
6” Oval Stop/Tail/Turn......................................10
6” Oval Park/Turn.............................................10
Interior Lighting
Backup Lights
Strip LED ............................................................ 28
7” Round...........................................................11
4” Round...........................................................12
Dome LED Universal and Oval........................ 27
Miscellaneous Products
5.25” x 8.5” C2 Rectangular............................13
Bus Light Monitor.............................................. 29
Marker/Clearance Lights
4.5 Round Stepwell.......................................... 30
120 Premium Series PC/P2...............................14
4” Curb/Entry.................................................... 31
120 Series I.D. Bar..............................................15
Bus Stop Arm Retrofit LED Upgrade Kit........... 32
140 Series...........................................................16
Select-a-Pattern Flashers................................. 29
QUICK REFERENCE
and manufacturing LED lights to provide the highest degree of safety for school bus passengers.
SIDE
A. Strobe Beacons
3000 Series
3107LCA or 3107LCC
4100 Series
ESB41BMH+A
ESB41BCHØA
B. Marker Lights
ECV4FPTMA
ECV4FPTMK
ecv5fptmk
SCHOOL BUS LED LIGHTING SPECIFICATIONS
C. 7” Round Front/Park/Turn Light
ECV7561FPTY-FA
School Bus LED
Lighting Specifications
D. Front/Park/Turn “Lollipop” Lights
ECV4FPTMA (Universal Amber)
ECV4FPTMK (Amber + Red Curb Side)
ECV5FPTMK (Amber + Red Road Side)
A.
C.
B.
D.
INTERIOR
E. Interior Dome Lights
EVCDMLTST2 (7” x 3.25”) or
ECVDMLTST4 (6” x 3”)
F. Universal Bus Lamp Monitor
(LED, Incandescent or Halogen)
ECVBSLM01
G. Stepwell or Curb/Entry Lights
ECVSWLTST (4.5” Stepwell)
ECVCBLTST (4” Curb/Entry Light)
E.
F.
1
G.
H.
FRONT
H. Marker and Clearance Lights (Front and Rear)
I.
520 Series
ECVMLDP1Y or R
I. 7” Round Warning Lights
SCHOOL BUS
J.
E756IEB0A or R
E756IEB0A-FA or R-FA
120 Series
ECVML121Y or R
ECVML12BMG (120 Guard)
ECVML151Y or R
ECVML15BMG (150 Guard)
150 Series
350 Series
STOP
J.
ECVMLT351Y or R
ECVMLT35MG (350 Guard)
6” Oval
K.
ECVO62MTY
ECVO61BMG (06 Guard)
K. Bus Stop Arm Retrofit LED Lighting Kit
ECVR12SAK (Light, Harness and Screws only)
REAR
L. Slim Overhead Bar (Front and Fear)
120 Series
ECVIDML12Y-RD or R-RD
M. 4” Round Stop/Tail/Turn License Plate Combo Light
ECVR41STTELP
ECVR41STTELP-RD
N. 3.5” x 2.5” Compact License Plate Light
ECVLPBLED
L.
O.7” Round or 8.5” x 5.25” C2 Reverse Light
ECV7561B2W or B2W-FA
ECVRT861B4W (C2 Rectangular)
P.
P. 7” Round Warning Lights
SCHOOL BUS
E756IEB0A or R
E756IEB0A-FA or R-FA
Q. 4” Round Turn Lights
ECVR42TY or FA (with Grommet)
ECVR44TY or FA (with Flange)
R. Round or Rectangular Turn Lights
ECV7561TY or TY-FA
Q. R.
ECV756ITYA-FA (with Arrow)
ECVRT861RPTY (C2 Rectangular)
C2 Stop/Tail/Turn Light
ECV7561STT, or STT-FA
ECVRT861STT (C2 Rectangular)
T. 4” Round Stop/Tail/Turn Light
T.
M.
U.
N.
ECVR41STT
ECVR42STT or -FA (with Grommet)
ECVR44STT or -FA (with Flange)
U. 4” Round Backup Lights
S.
O.
S.7” Round or 5.25” x 8.5”
ECVR41B2W or -FA (Dual Function with Flange)
2
SCHOOL BUS LED LIGHTING SPECIFICATIONS
J. Marker Lights (Front and Rear)
7” Round Warning Lights
Features
Leading 8-way warning light system
Advanced optical technology exceeds all FMVSS and SAE requirements
Specially engineered reflective optics to boost light output and brightness
Sonic welded, waterproof construction
Reinforced stainless steel screw bosses – tested to 70 inch lbs. of torque
Lens with UV inhibitor prevents sun fade
Weatherproof seal with adhered neoprene gasket
Includes 7” wire length
7” Round Premium Warning Light
#E756IEBØ(x)
WARNING LIGHTS
(x) =
Y
R
7” Round Warning Light #E756IEBØ(x)-FA
(x) =
Y
R
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Premium 7” Round
10-16 Vdc
12.8 Vdc, Steady Burn: 1 - 1.6 Amps, Strobing: 0.6 - 0.9 Amps
Current Draw
7” Round
9-16 Vdc
LED COUNT
Premium 7” Round
7” Round
Red, 124 or Yellow, 124 LEDs Red, 62 or Amber, 100 LEDs
Flash Patterns
2 Modes: Steady Burn and Strobing @ 10.4 f.p.s.
Dimensions
MOUNTING
7” (17.8 cm) diameter x 1.875” (4.8 cm) depth
Surface Mount on 6.25” (15.9 cm) centers
CERTIFICATIONS
SAE J575, J578 and J887 certified; Article 22 CA Title 13 compliant and FMVSS108 certified
Warranty
Five-year
3
7” Round Stop/Tail/Turn Signal Lights
Features
Advanced optical technology exceeds all FMVSS and SAE requirements
Premium offers greatest number of LEDs, our brightest light
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Reinforced stainless steel screw bosses – tested to 50 inch lbs. of torque
Lens with UV inhibitor prevents sun fade
Weatherproof seal with adhered neoprene gasket
7” Round Premium Stop/Tail/Turn
Red
#ECV7561STT
7” Round Stop/Tail/Turn
Red
#ECV7561STT-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
Premium 7” Round
10-16 Vdc
7” Round
9-16 Vdc
12.8 Vdc; Stop/Turn: .2 Amp, Tail: .1 Amp
Premium 7” Round
48 LEDs
7” Round
19 LEDs
7” (17.8 cm) diameter x 1.875” (4.8 cm) depth
Surface Mount on 6.25” (15.9 cm) centers
CERTIFICATIONS
SAE J575, J578, J585, J586, J588, J1395, J1398 and FMVSS 108 certified
Five-year
Warranty
4
SIGNAL LIGHTS
Includes 7” wire length
7” Round Rear Turn Signal Lights
Features
Advanced optical technology exceeds all FMVSS and SAE requirements
Premium offers greatest number of LEDs, our brightest light
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Reinforced stainless steel screw bosses – tested to 50 inch lbs. of torque
Lens with UV inhibitor prevents sun fade
Weatherproof seal with adhered neoprene gasket
Includes 7” wire length
SIGNAL LIGHTS
7” Round Premium Rear Turn
Amber
#ECV7561TY
7” Round Rear Turn
Amber
#ECV7561TY-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
Premium 7” Round
10-16 Vdc
7” Round
9-16 Vdc
12.8 Vdc, .2 Amp
48 LEDs
19 LEDs
7” (17.8 cm) diameter x 1.875” (4.8 cm) depth
Surface Mount on 6.25” (15.9 cm) centers
CERTIFICATIONS
SAE J575, J578, J588, J1395 certified and FMVSS 108 certified
Five-year
Warranty
5
7” Round Rear Turn with Arrow
and Front/Park/Turn Signal Lights
Features
Advanced optical technology exceeds all FMVSS and SAE requirements
Greatest number of LEDs, our brightest light
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Reinforced stainless steel screw bosses – tested to 50 inch lbs. of torque
Lens with UV inhibitor prevents sun fade
Weatherproof seal with adhered neoprene gasket
Includes 7” wire length
7” Round Front/Park/Turn
Amber
#ECV7561FPTY-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Rear Turn with Arrow
Front/Park/Turn
Current Draw
Rear Turn with Arrow
Front/Park/Turn
LED COUNT
Dimensions
MOUNTING
7” Round
9-16 Vdc
9-16 Vdc
12.8 Vdc, .32 Amp; 12.8 Vdc, Stop/Turn: .2 Amp; Tail: .1 Amp
12.8 Vdc; Stop/Turn: .2 Amp
19 LEDs
7” (17.8 cm) diameter x 1.875” (4.8 cm) depth
Surface Mount on 6.25” (15.9 cm) centers
CERTIFICATIONS
SAE J222, J575, J578, J588, J1395; FMVSS 108 certified and Front/Park/Turn
Five-year
Warranty
6
SIGNAL LIGHTS
7” Round Rear Turn with Arrow
Amber
#ECV7561TYA-FA
5.25 x 8.5 C2 Rectangular
Signal Lights
Features
Solid-state lighting design yields years of maintenance-free service
LEDs offer greater visibility and increased safety verses traditional incandescent bulbs
Excellent off angle visibility
Scratch-resistant polycarbonate lens
RoHS compliant
C2 Rectangular Stop/Tail/Turn
Red
#ECVRT861STT
SIGNAL LIGHTS
C2 Rectangular Park Turn
Amber
#ECVRT861RPTY
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE Current Draw
LED COUNT
Dimensions
MOUNTING
CONNECTOR REQUIREMENTS
9-16 Vdc
Red: 12.8 Vdc, .21 Amp; Amber: 12.8 Vdc, .15 Amp
18 LEDs
8.5” (21.59 cm) H x 5.25” (13.335 cm) W x 2.27” (5.40 cm) D
Flush mount, using four threaded metal screws
Light body has 3-pin overmolded, integrated male connector which mates with an Amp 1.5 Series Superseal female, waterproof connector, P/N 282087-1 (female connector not included)
CERTIFICATIONSRed: SAE J575, J578, J585, J586, J588, J1395, J1398 certified and FMVSS 108 certified
Amber: SAE J575, J578, J588, J1395 certified and FMVSS 108 certified
Warranty
Five-year
7
4” Round Stop/Tail/Turn
Signal Lights
Features
Advanced optical technology exceeds all SAE requirements and FMVSS
Specially engineered lens to boost light output and brightness
Lens has UV inhibitor that prevents sun fade
4” Round Stop/Tail/Turn
Red with Grommet
#ECVR42STT-FA
#ECVR44STT-FA
Red with Flange
Shown with Grommet
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE Premium 4” Round
4” Round
10-16 Vdc
9-16 Vdc
Current Draw
LED COUNT
Dimensions
MOUNTING
12.8 Vdc; Stop/Turn: .013-.19 Amp, Tail: .013-.179 Amp
Premium 4” Round
32 LEDs
4” Round
12 LEDs
4” (10.16 cm) diameter x 1.25” (2.86 cm) depth
Recess mount into standard 4.5” round
CERTIFICATIONS
SAE J575, J578, J585, J586, J588, J1395, J1398 certified and FMVSS 108 certified
Five-year
Warranty
8
SIGNAL LIGHTS
4” Round Premium Stop/Tail/Turn with Grommet
Red
#ECVR42STT
4” Round Turn Signal Lights
Features
Advanced optical technology exceeds all SAE requirements and FMVSS
Specially engineered lens to boost light output and brightness
Lens has UV inhibitor that prevents sun fade
4” Round Premium Turn with Grommet
Amber
#ECVR42TY
SIGNAL LIGHTS
4” Round Turn with Grommet
Amber
#ECVR42TY-FA
4” Round Turn with Flange
Amber
#ECVR44TY-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE Premium 4” Round
4” Round
10-16 Vdc
9-16 Vdc
Current Draw
LED COUNT
Dimensions
MOUNTING
12.8 Vdc, .013-.28 Amp
Premium 4” Round
40 LEDs
4’ Round
10 LEDs
4” (10.16 cm) diameter x 1.25” (2.86 cm) depth
Recess mount into standard 4.5” round
CERTIFICATIONS
SAE J222, J575, J578, J588, J1395 certified and FMVSS 108 certified
Five-year
Warranty
9
6” Oval Stop/Tail/Turn and
Park/Turn Signal Lights
Features
Advanced optical technology exceeds all FMVSS and SAE requirements
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Light includes 8” wire length with attached AMP Superseal 1.5 Series Connector
6” Oval Stop/Tail/Turn
Red with Grommet
Red with Flange
#ECVO62STT
#ECVO64STT
Premium and LD lights have attached AMP Superseal
1.5 Series Connector and include mating harness
6” Oval Park/Turn
Amber with Grommet
Amber with Flange
#ECVO62TY
#ECVO64TY
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Stop/Tail/Turn
Park/Turn
Current Draw
Stop/Tail/Turn
Park/Turn
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
10-16 Vdc
12.8 Vdc, Stop/Turn: .16 Amp and Tail: .023 Amp
12.8 Vdc, Tail: .043 Amp and Turn: .16 Amp
14 LEDs
4” (10.16 cm) diameter x 1.25” (2.86 cm) depth
Recess mount into standard 6” oval hole
CERTIFICATIONS
Stop/Tail/Turn Park/Turn SAE J575, J578, J586, J588, J1395 certified and FMVSS 108 certified
SAE J575, J578, J588 and J1395 certified and FMVSS 108 certified
Five-year
Warranty
10
SIGNAL LIGHTS
7” Round Backup Lights
Features
Reinforced stainless steel screw bosses – tested to 60 inch lbs. of torque
Weatherproof seal with adhered neoprene gasket
BACKUP LIGHTS
7” Round Premium Backup
White
#ECV7561B2W
7” Round Backup
White
#ECV7561B2W-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
Premium 7” Round
10-16 Vdc
7” Round
9-16 Vdc
12.8 Vdc, .6-.85 Amp
13.8 Vdc, .5 Amp
Premium 7” Round
28 LEDs
7” Round
19 LEDs
7” (17.8 cm) diameter x 1.875” (4.8 cm) depth
Surface mount on 6.25” (15.9 cm) centers
CERTIFICATIONS
SAE J593 and FMVSS 108 certified
Five-year
Warranty
11
4” Round Backup Lights
Features
4” Premium Round Backup
Greater number of LEDs (our brightest light)
Light includes 8” wire length with attached AMP superseal 1.5 series connector
4” Round Backup
Single, bright-white offers unmatched output and brightness
4” Round Premium Backup
White with Grommet
#ECVR42B2W
4” Round Backup
White with Grommet
#ECVR42B2W-FA
4” Round Backup
White with Flange
#ECVR44B3W-FA
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
Premium 4” Round
10-16 Vdc
4” Round
9-16 Vdc
12.8 Vdc, .2-.337 Amp
Premium 4” Round
28 LEDs
4” Round
12 LEDs
4” (10.15 cm) diameter x 1.25 (3.18 cm) depth
MOUNTING
Recess mount into standard 4.5” (11.4 cm) cut out with black rubber grommet or chrome dress ring
CERTIFICATIONS
SAE J593 and FMVSS 108 certified
Five-year
Warranty
12
BACKUP LIGHTS
Light includes 8” wire length with attached AMP superseal 1.5 series connector
5.25” x 8.5” C2 Rectangular
Backup Light
Features
Solid-state lighting design yields years of maintenance-free service
LEDs offer greater visibility and increased safety verses traditional incandescent bulbs
Excellent off-angle visibility
Scratch-resistant polycarbonate lens
BACKUP LIGHTS
5.25” x 8.5” C2 Rectangular Backup
White
#ECVRT861B4W
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc, .14 Amp
18 LEDs
5.25” (13.34 cm) W x 8.5” (21.60 cm) H x 2.27” (5.4 cm) D
Flush mount using four threaded metal screws
CONNECTION REQUIREMENTS
Light body has 3-pin overmolded, integrated male connector which mates with an 1.5 Amp series superseal female, water proof connector (part no. 282087-1). Female connector not included.
CERTIFICATIONS
SAE J593 certified and FMVSS 108 certified
Five-year
Warranty
13
120 Series PC/P2
Clearance and Marker Light
Features
PC/P2 rated combination clearance and marker lights are perfect for bus front and rear corner mounting
Light includes neoprene gasket, mounting hardware and 7” two-wire leads with .180 molded bullet connectors
Optional black mounting guard available
(x) =
Y
R
accessories
Metal Guard
#ECVML12BMG
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc, 0.05 Amp
3 LEDs
4” (10.15 cm) L x 1” (2.55 cm) W x 0.75” (1.9 cm) D
Surface mount on 3.15” (8 cm) centers
CERTIFICATIONS
SAE J593 certified; FMVSS 108 certified; P2 rated and PC rated
Five-year
Warranty
14
MAKRER AND CLEARANCE
Marker#ECVML121(x)
Marker with Metal Guard
#ECVML122(x)
120 Series I.D. Bar
Features
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Compact and slim design
P2 rated combination clearance and marker lights are perfect for bus front and rear mounting
Attractive polycarbonate base protects lights
Light includes neoprene gasket, mounting hardware and 7” two-wire leads with Delphi 150 Series Metri-Pack connector
MARKER AND CLEARANCE
120 Series I.D. Bar
#ECVIDML12(x)-RD
Amber or Red
(x) =
Y
R
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
10-16 Vdc
12.8 Vdc, 0.16 Amp
9 LEDs
17” (43 cm) L x 1” (2.55 cm) W x 1.44” (3.66 cm) D
MOUNTINGSurface mount on 16.5” (42 cm) centers
CERTIFICATIONS
SAE J592 certified; FMVSS 108 certified and P2 rated
Five-year
Warranty
15
140 Series Marker
Features
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Compact and slim design
P2 and P3 rated combination clearance and marker lights are perfect for bus front and rear corner mounting
140 Series Marker
Amber or Red
#ECVML141(x)
(x) =
Y
R
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
10-16 Vdc
12.8 Vdc, .04 Amp
2 LEDs
4.5” (11.4 cm) L x 1.7” (4.3 cm) W x 0.4” (1 cm) D
MOUNTINGSurface mount on 4” (10 cm) centers
CERTIFICATIONS
SAE J592, J594 and J2041 certified; FMVSS 108 certified and P2 rated
Five-year
Warranty
16
MAKRER AND CLEARANCE
Light includes neoprene gasket, mounting hardware and 7” two-wire leads with .180 molded bullet connectors
150 Series Marker: Compact Design
Features
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
PC and P2 rated markers are perfect for bus front and rear corner mounting
Light includes neoprene gasket and 7” two-wire leads with standard female plug
Optional mounting guard
MARKER AND CLEARANCE
150 Series Marker: Compact Design
Amber or Red
#ECVML151(x)
Amber or Red with Plastic Guard
#ECVML155(x)
Amber or Red with Plastic Guard and
Mating Harness
#ECVML153(x)
(x) =
Y
Double Female Plug
Male Mating Harness
R
Neoprene Gasket
accessories
Plastic Guard #ECVML15BMG
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc, .08 Amp
4 LEDs
2.5” (6.4 cm) L x 1.25” (3.175 cm) W x .88” (2.2 cm) D
Surface mount with mounting base, 2” (5.1 cm) centers or mounting guard: 3.875”
(9.9 cm) centers
CERTIFICATIONS
SAE J592 certified; FMVSS 108 certified; PC rated and P2 rated
Five-year
Warranty
17
350 Series Marker
Features
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Triangular design with optional stainless steel mounting guard
PC and P2 rated markers are perfect for bus front and rear corner mounting
Light includes neoprene gasket, mounting hardware and 5” self-grounding, single-wire lead with stripped wire end
350 Series Marker
Amber or Red
accessories
#ECVMLT351(x)
(x) =
Y
R
Stainless Steel Armored Guard
#ECVMLT35MG
Armored Guard
Light sold separately
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc, .13 Amp
24 LEDs
3.44” (8.75 cm) H x 2.63” (6.7 cm) W x 1.66” (4.2 cm) D
Surface mount on 1.44” (3.66 cm) centers
CERTIFICATIONS
SAE J592 and J594 certified; FMVSS 108 certified; PC rated and P2 rated
Five-year
Warranty
18
MAKRER AND CLEARANCE
Optional stainless stell amored guard
520 Series Marker
Features
Specially engineered lens to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Narrow design sets flush against the vehicle
LED OEM and replacement marker light is designed to fit IC school buses
MARKER AND CLEARANCE
520 Series Premium Marker
Amber or Red
#ECVMLDP1(x)
Amber or Red (with fat gasket) #ECVMLDP2(x)
(x) =
Y
R
Fat Gasket
520 Series Marker
Amber or Red
#ECVMLDP1(x)-RD
(x) =
Y
R
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
10-16 Vdc
Current Draw
520 Series Premium
520 Series
12.8 Vdc, .6 Amp
12.8 Vdc, .5 Amp
LED COUNT
520 Series Premium
6 LEDs
520 Series
1 LED
Dimensions
5” (12.7 cm) L x 2.31” (5.87 cm) H x .875” (2.225 cm) D
MOUNTING
Surface mount on 3.75” (9.5 cm) centers
CERTIFICATIONS
SAE J592 certified; FMVSS 108 certified and P2 rated
Five-year
Warranty
19
6” Oval Mid-Turn Marker
Features
Specially engineered reflective optics to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
Light includes 8” wire length with attached with attached AMP Superseal 1.5 Series connector
Weatherproof seal with adhered neoprene gasket
Surface Mount may be mounted directly to the body of the vehicle or with optional rubber grommet or metal guard
6” Oval Mid-Turn Marker
Amber (with grommet)
accessories
#ECVO62MTY
Light sold separately
Metal Guard
#ECVO61BMG
Rubber Grommet
#ECVO6GRMT-BK
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc, .11 Amp
5 LEDs
6.47” (16.5 cm) L x 2.2” (5.6 cm) H x 1.52” (3.8 cm) D
Surface mount on 4.79” (12.2 cm) centers or recess mount with rubber grommet
CERTIFICATIONS
SAE J592, J2039 certified; FMVSS 108 certified and P2 rated
Five-year
Warranty
20
MAKRER AND CLEARANCE
Advanced Optical Technology exceeds all FMVSS and SAE requirements
Turn Signal Marker Lights
Features
Multi-function design offers park/tail/turn functions
Built-in side reflector/marker on each side of light has 3 bright LEDs
Universal, curb side or road side models available
Vertical surface mount light has a two stud mount
Advanced optical technology exceeds FMVSS and SAE requirements
Specially engineered reflective optics to boost light output and brightness
Sonic welded, waterproof construction
Lens with UV inhibitor prevents sun fade
MARKER AND CLEARANCE
Turn Signal Markers
Dual Face, Two Stud Mount: Universal Mount, Amber/Amber
#ECV4FPTMA
Dual Face, Two Stud Mount: Curb Side Mount, Amber/Red
#ECV4FPTMK
Road Side Mount, Amber/Red#ECV5FPTMK
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE RANGE
Current Draw
LED COUNT
Dimensions
MOUNTING
10-16 Vdc
12.8 Vdc; Turn, 0.65 Amp and Tail, 0.12 Amp
Amber Face, Super 18 LEDs; Red Face, 9 LEDs and Side Marker, 3 LEDs
4.72” (12 cm) H x 4.53” (11.5 cm) W x 2.44” (6.2 cm) D
Stud surface mounts on 2.02” (5.1 cm) centers
CERTIFICATIONS
Universal and Curb Side Mounts
SAE J592, J594 and J1395 certified and FMVSS 108 certified
Road Side MountSAE J587 certified and FMVSS 108 certified
Warranty
Two-year
21
BEACONS: 3000 Series Strobe
Features
Lens with UV inhibitor prevents sun fade
Rated to last 20,000+ hours
Advanced circuitry designed tolerate high vibration applications
Replace (x) in Order NUMBER
for PERSONALIZED Selection
Order No: 3 (xx)(x)(x)(x)(x)
(xx) = WATTS 1Ø = 10 Watt
2Ø = 20 Watt
(x) = FLASH 7 = Double and Quad
(x) = Height L = Low, 4” Dome
H = High, 6” Dome
(x) = color
A = Amber Lens
C = Clear Lens/White
accessories
Branch Guard and Dust Cover (Beacon not included)
Dust Cover
Branch
Guards (6” shown)
4” Height
#PESB41BG4
6” Height
#PESB41BG6
6” Height
#E36ØDC6
CA Title 13,
Article 22 Compliant
TECHNICAL SPECIFICATIONS
Flash Patterns
TECHNOLOGY INPUT VOLTAGE
CURRENT DRAW
2 flash patterns, double or quad (user selectable)
Xenon Helix Strobe Tube
10-30 Vdc
10 watt: 1 amp @ 12 Vdc, 0.5 amp @ 24 Vdc or 20 watt: 2 amps @ 12 Vdc, 1 amp @ 24 Vdc
OPERating Temperature
-40° C to 50° C
DimensionS
4” Dome with base: 4.75” (12 cm) H or 6” Dome with base: 6.7” (17 cm) H x 6.3” (16 cm)
base diameter
MOUNTING
CERTIFICATIONS Permanent or Magnetic mount (polycarbonate lens and black base)
SAE J 1318 Class 2 certified and CA Title 13, Article 22 compliant with Dust Cover Accessory
WARRANTYTwo-year (strobe tube, one-year)
22
BEACONS
(x) = Mount C = Flat/Pipe
M = Magnetic
BEACONS: 4100 Series Strobe
Features
Bright strobe technology
Quad flash pattern (4 consecutive flashes @ 70 f.p.m.)
Magnetic mount includes 12 volt DC plug with on/off rocker switch and gaskets for easy installation
Magnetic mount features extra strong magnets to prevent the bar from slipping or moving
Permanent mount includes mounting hardware and gaskets with bare wires for installation
Rugged aluminum base
4100 Series Strobe
BEACONS
accessories
Magnetic Mount
#ESB41BMH+A
Permanent Mount
#ESB41BCHØA
Branch Guard and Dust Cover (Beacon not included)
Dust Cover
Branch
Guards (6” shown)
4” Height
#PESB41BG4
6” Height
#PESB41BG6
6” Height
#E36ØDC6
CA Title 13,
Article 22 Compliant
TECHNICAL SPECIFICATIONS
Flash Patterns
INPUT VOLTAGE
12-24 Vdc
CURRENT DRAW
2.6 Amp @ 12 .8 Vdc, 1.8 Amp @ 24 Vdc
LED COUNT
OPERating Temperature
DimensionS
MOUNTING
CERTIFICATIONS WARRANTY
Quad @ 70+/-10 f.p.m.
6 LEDs
-40° C to 50° C
6” Dome with base: 6.8” (17.25 cm) H, 6.75” (17 cm) Diameter
Magnetic or Permanent mounts
SAE J845 certified and CA Title 13, Article 22 compliant with Dust Cover Accessory
Two-year (strobe tube one-year)
23
BEACONS: 4700 Series LED
Features
36 powerful LEDS provide 360 degrees of advanced optimal light distribution
Waterproof IP67 and PC Lens to combat dust build-up
Rugged polycarbonate base
4700 Series LED
#ELB47BML+A
Flat/Pipe Mount: 5” Dome Amber Lens
#ELB47BCLØA
BEACONS
Magnetic Mount: 5” Dome Amber Lens
TECHNICAL SPECIFICATIONS
Flash Patterns
LED COUNT
8 flash patterns
36 LEDs
INPUT VOLTAGE
10-30 Vdc
CURRENT DRAW
13W average (low current)
OPERating Temperature
-40° C to 65° C
5” Dome with base: (12.7 cm) H, 7.37” (18.72 cm) base diameter
DimensionS
MOUNTINGMagnetic or Flat/Pipe mount
CERTIFICATIONS SAE J845 Class 1 certified and ECE65 Class 1, tested and certified
WARRANTYThree-year
24
Combo License Plate Light
Features
Unique design combining two lights in one; a 4” Stop/Tail/Turn with a built-in white LED license plate light
Same great features as our 4” Round Signal Light
Advanced optical technology exceeds all FMVSS and SAE requirements
Provides weatherproof seal with neoprene gasket
Includes mounting hardware with 8” three-wire lead for installation
Premium Combo License Plate
4” Round Red and White
#ECVR41STTELP
Combo License Plate
LICENSE PLATES
4” Round Red and White
#ECVR41STTELP-RD
INPUT VOLTAGE
10-16 Vdc
CURRENT DRAW
12.8 Vdc, Stop/Turn with License Plate Light: 0.2 Amp, Tail with License Plate Light: 0.1 Amp
TECHNICAL SPECIFICATIONS
LED COUNT
Premium 4” Round
Stop/Tail/Turn: 32 Red and License: 8 White DimensionS
MOUNTING
CERTIFICATIONS 4” Round
Stop/Tail/Turn: 13 Red and License: 8 White
4.7” (11.9 cm) diameter x 3” (7.6 cm) depth
Screw mount
SAE J575, J578, J587, J588 and J1395 certified and FMVSS108 certified
WARRANTYFive-year
25
Compact License Plate Light
Features
Specially engineered lens to boost light output and brightness
Brightly illuminates license plates and bus numbers for easy identification in the dark
Durable, rustproof black polycarbonate housing complements other bus accessories and lights
Slim design is less likely to be hit during backup maneuvers
Sonic welded with waterproof construction
UV inhibitor lens prevents sun fade
Includes mounting hardware with 8” two-wire lead for installation
Compact License Plate
#ECVLPBLED
LICENSE PLATES
3.5” White
INPUT VOLTAGE
CURRENT DRAW
LED COUNT
TECHNICAL SPECIFICATIONS
DimensionS
MOUNTING
CERTIFICATIONS 10-16 Vdc
12.8 Vdc: .4 Amp
4 LEDs
3.5” (8.9 cm) W x 2.5” H (6.4 cm) x 1.25” (32 cm) D; with rubber gasket: 1.75” (4.4 cm) D
Surface mount on 2” centers
SAE J575, J578, J587 certified and FMVSS108 certified
WARRANTYFive-year
26
Dome LED Interior Lights
Features
Exclusive lens design disperses the maximum amount of light
Great for interior light for overhead lighting on passenger buses
Durable polycarbonate lens and base is a simple surface mount
Includes 2-wire Lead with 5” length/mounting screws for installation
Universal Dome
#ECVDMLTST2
Features
Smaller size and competively priced
Great for interior light for overhead lighting on passewnger buses
Easy surface mount with a simple 2-wire electrical connection
Includes 2-wire Lead with 5” length/mounting screws for installation
INTERIOR
Universal Dome
#ECVDMLTST4
Features
Narrow design sets flush against the vehicle
Fat gasket for surface mounting
Includes 2-wire Lead with 5” length/mounting screws for installation
Oval Dome
TECHNICAL SPECIFICATIONS
CURRENT DRAW
#ECVDMLTST2#ECVDMLTST4
< 0.65 Amp
< 0.45 Amp
DimensionS
#ECVDMLTST2 #ECVDMLTST4
#ECVMLDP2W
7” (17.78 cm) W x 3.25 (8.25 cm) H
6” (15.24 cm) W x 3” (7.62 cm) H
5” (12.7 cm) W x 2.3” (5.84 cm) H
MOUNTING
#ECVMLDP2W
#ECVMLDP2W
< 0.45 Amp
Surface mount
WARRANTY
#ECVDMLTST2#ECVDMLTST4
5-year
2-year
27
#ECVMLDP2W
5-year
Strip LED Interior Lights
Features
Light has a white steel base with a scratch resistant polycarbonate lens
Specially engineered Fresnel lens to boost light output and brightness
Includes 2-wire lead with a 18” length
LED
Strip 10-16
Vdc 10-30 Vdc
#ECVCSMLEDF#ECVCSMLEDF-24
Features
Streamlined, low Amp draw
Housing design allows for clean wire management behind light
Easy installation - make a simple 2-wire electrical connection
Glossy white powder coated aluminum housing with a polycarbonate lens
LED
90° Corner Mount Strip 10” Length
21” Length
32” Length
43” Length
10-16
Vdc 10-30 Vdc
#ECVCSLLED1Ø#ECVCSLLED10-3Ø
#ECVCSLLED21#ECVCSLLED21-3Ø
#ECVCSLLED32#ECVCSLLED32-3Ø
#ECVCSLLED43#ECVCSLLED43-3Ø
Features
Specially engineered lens optic directs light away from viewer’s eye
Glossy white powder coated aluminum housing with a polycarbonate lens
Includes 2-wire lead with a 18” length and end/trim caps
LED Flush Mount Strip 10-16 Vdc
12” Length
24” Length
36” Length
42” Length
#ECVCLLED12
#ECVCLLED24
#ECVCLLED36
#ECVCLLED42
TECHNICAL SPECIFICATIONS
LED Strip
10-16 Vdc or 10-30 Vdc
LED 90៓ Corner Mount Strip
10-16 Vdc or 10-30 Vdc
LED Flush Mount Strip
10-16 Vdc or 10-30 Vdc
CURRENT DRAW
LED Strip
0.4 Amp
LED 90៓ Corner Mount Strip
0.4 Amp per 12” length
LED Flush Mount Strip
0.4 Amp per 12” length
VOLTAGE
WARRANTYFive-year
28
INTERIOR
Includes 2-wire lead with a 18” length
Bus Light Monitor
Features
Patented Technology (US Patent 7046132 B2) - the first bus light monitor to receive a US Patent
Continuously monitors electrical system to detect symptoms of battery or alternator failures before they occur
Direct interchange for existing monitors - allows the retrofit of monitor and LED lights on older buses
The first school bus monitor to monitorall lights by any manufacturer; LED, Halogen and Incandescent technology
Bus Light Monitor
#ECVBSLMØ1
MISCELLANEOUS
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
10-16 Vdc
CURRENT DRAW
Warning Lights: 240 mA -14 Amp, Tail Lights: 7.5 mA -3 Amp and Backup Lights: 20 mA -7.5 Amp
DimensionS
MOUNTING
Surface mount on 4.375” (11.1 cm) centers
WARRANTY
5-year
4.3” (10.9 cm) H x 6.6” (16.75 cm) W x 1.25” (3.2 cm) D
Select-a-Pattern Flashers
Features
Designed for positive side switched, 2 or 4 headlight systems
Features Select-a-Pattern Technology with 7 user selectable flash patterns: PowerPulse,
RoadRunner, ETM, Q-Switch, Cycle Flash, Single Flash or Double Flash Alternating
Built-in shutdown features include protection against: short circuit, over current, over voltage,
under voltage, over temperature and reverse polarity
Heavy Duty Model
#ETHDSS-SP
18” wire leads
#ETHFSS-SP
AMP Connector
#ETHFSS-SPA
AMP Connector and Harness #ETHFSS-SPFL
Weather Seal Connector
#ETHFSS-SPWS
Isolation Model #ETHFSS-SP-ISO
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
DimensionS
MOUNTING
Mounts on 4” (10 cm) centers
WARRANTY
5-year
8-30 Vdc @ 9.5 Amp
4.7“ (12 cm) L x 2” (5.1 cm) W x 0.7” (1.8 cm) H, Wire length: 18” (46 cm)
29
4.5” Round Stepwell Light
Features
Provides excellent lighting at the entrance of buses and wheelchair lifts to illuminate the steps
Specially engineered Fresnel lens to boost light output and brightness
Easy retrofit for incandescent lights as it fits existing drill holes
Durable and shatter resistant clear polycarbonate lens has UV inhibitor to prevent discoloration
Excellent heat dispersion – lens stays cool to the touch
Sonic welded, waterproof construction
Weatherproof seal with adhered neoprene gasket
LED 4.5” Stepwell Light TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
10-30 Vdc
CURRENT DRAW
12.8 Vdc: .3 Amp @ 25.8 Vdc: .15 Amp
LED COUNT
DimensionS
MOUNTING
Surface Mount - fits existing incandescent light drill holes
WARRANTY
5-year
1 LED
4.48” (11.4 cm) Diameter x 1.20” (3.0 cm) Depth
30
#ECVSWLTST
MISCELLANEOUS
Includes mounting screws with 6.5” two-wire lead
4” LED Curb/Entry Light
Features
Specially engineered Fresnel lens to boost light output and brightness
Durable e-coated metal housing in an attractive black finish complements bus accessories and lights
Sonic welded, waterproof construction for exterior or interior use
Lens with UV inhibitor prevents sun fade and discoloration
Light includes neoprene gasket to create a tight, waterproof seal
Includes mounting screws with 6.5” two-wire lead
LED 4” Curb/Entry Light
Standard (no connector)
#ECVCBLTST
Delphi Weather Pack connector
#ECVCBLTST-WP
MISCELLANEOUS
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
10-30 Vdc
CURRENT DRAW
Standard
12.8 Vdc, .3 Amp
LED COUNT
1 LED
DimensionS
MOUNTING
CERTIFICATION
WARRANTY
Delphie Weather Pack
25.8 Vdc, .15 Amp
4” (10.2 cm) W x 2.74” (7.0 cm) H x 1.27” (3.2 cm) D
Surface mount on 3.09” (7.8 cm) centers
IP67
5-year
31
Bus Stop Arm Retrofit LED Upgrade Kit
Features
LED lighting design provides years of maintenance-free service
Increased visibility
Decreases passing violations
More cost-effective than traditional units
Installs in minutes
Kit consists of four 12-LED lights, mounting screws and harness
#ECVR12SAK (lights only)
TECHNICAL SPECIFICATIONS
INPUT VOLTAGE
9-16 Vdc
CURRENT DRAW
12.8 Vdc, .5 Amp
FLASH PATTERN
3 flash patterns available (single, double and intercycle)
MOUNTING
CERTIFICATIONS
WARRANTY
Double-sided flush mount to existing, standard electric and pneumatic bus stop arms
SAE J576, J578, J759, J1133 certified and FMVSS 131 certified
2-year
32
MISCELLANEOUS
Bus Stop Arm Retrofit LED Upgrade Kit