FRONT
SIDE
FRONT 3/4 FRONT 3/4
BACK 3/4
BACK
BACK 3/4
FRONT
FRONT
SIDE
SMARTWATCH USER MANUAL
FRONT 3/4
FRONT
FRONT
FRONT
BACK
3/43/4
SIDE
SIDE
BACK 3/4
FRONT
BACK
BACK
SIDE
BACK
FRONT BACK
FRONT 3/4 FRONT 3/4
SIDE
FRONT 3/4
FRONT
Model #: SW01
FRONT
SIDE
BACK SIDE
BACK
FRONT 3/4
SIDE
BACK
BACK
BACK 3/4
BACK 3/4
BACK
BACK 3/4
BACK
FRONT
3/4 3/4
www.one61.com
BACK 3/4
One61 Smartwatch Hardware
FRONT
SIDE
Here’s a guide to the hardware
features of the One61 Studio Smartwatch.
BACK
FRONT 3/4
1
3
5
2
4
2
8
By numbers
1. Display
2. Mic
3. Power button
4. Speaker
5 Charging terminals
6. USB cable
7. Charging terminals
8. Charging cradle
7
One61 Smartwatch tech specs:
OS Nucleus RTOS
Screen 1.54” 240 x 240 IPS LCD
Dimensions 40 x 46 x 10 mm
Watch Weight 53g
Case Weigth
36g
Battery 250 mAh
Processor MT2502C
Wireless Bluetooth 4.0 and BLE
Memory 16MB ROM with 8MB RAM
Ports and Connectors USB (pogo pin) on One61 watch, Micro USB on Charging Cradle
Sensors 6 Axis (Accelerometer/Gyro)
FRONT
SIDE
BACK
Charge your One61 Watch
Place the One61Watch on the charging cradle, matching each charging terminal (line up the gold pins).
Make sure the cradle is connected to a power outlet.
1. Plug Micro USB into Cradle
BACK
FRONT 3/4
BACK 3/4
2. Charging terminals
- Use only the approved cradle and micro USB cable that come with your One61 Watch.
- The input voltage range between the wall outlet and this power adapter is AC 100V– 240V, and the power adapter’s
output voltage is DC 5V, 0.85A.
- Charging One61 Watch through a USB cable attached to another device, such as a laptop computer, takes the same
charging time as with the power adapter.
- One61 Watch’s battery can’t be removed. Don’t attempt to open the watch.
- If the Smartwatch is OFF, you will see a charging indication on the center of screen.
- If the Smartwatch is ON, you will see a charging indication on the top right corner main menu.
Turn One61 Watch on or off / Factory Reset
Initial Power On
- Connect the charging cradle to a power outlet and place the a One61 Watch on it. Press and hold the power button until
the screen turns on.
- When you turn the One61 Watch on for the first time, follow the instructions displayed on the watch screen.
- The instructions will guide you on how to connect the One61 Watch to your mobile device.
Turn the watch Power Off
1. If your screen is off, press and hold the power button to wake up the watch
2. Press and hold the power until you see the power down screen
Factory Reset:
Option 1:
- Unpair the One61 Watch from the mobile app and device. Note: unpairing from the app will reset your watch to factory
settings. Go to: Me > [Name] Device > Unpair Watch > Confirm.
Option 2:
- Turn off the Bluetooth off from your device reset through the One61 watch by Going to: Settings > Reset > Confirm Reset.
Note, this will erase all the data from the watch and reset your watch to factory settings.
Setup and Pairing
Pair your watch with your Device
Your watch is meant to work together with your mobile device, so you’ll need to pair them. The watch requires paring for
both Bluetooth Classic and Bluetooth Low Energy (BLE). If you’re pairing your watch for the first time, make sure your
device Bluetooth is turned on and your device is connected to mobile data or Wi-Fi. You need a data connection to
complete setup. You should also keep the watch connected to power during setup.
Here’s how to pair:
1. Turn on your watch, and make sure it is within a few feet of your phone.
2. Download and install the One61 Smartwatch app on your device.
- You can search for “One61 Watch” in Google Play or Apple App Store
3. Open the One61 Smartwatch app on your device and follow the onscreen prompts form the watch.
4. On your device, you will need to create a user account in the One61 Smartwatch app
- Launch the app
- Tap “Signup”
- Enter your valid email address
- Enter your name or username
- Enter a password
- Tap “Submit”
5. One you’ve completed your signup, set up your user profile.
- Select a profile image
- Select a name
- Select your gender
- Select your height
- Select your weight
- Select your daily step goal
- Tap “Next” to save your profile setup
5. Paring screen will automatically launch once you confirm your profile settings, you’ll see a list of nearby devices.
Tap your watch’s name.
- You can check the name of your watch on the watch display.
6. You will receive a message telling you to pair Bluetooth Classic through your device setting.
7. For Android device, you will see a pairing confirmation passkey on your device; confirm and the watch will start pairing
8. You will receive several Permission notifications for you to allow on your Device
- Allow Access to Messages - Allow
- Allow Access to Contacts and Logs – Allow
9. Open the Bluetooth settings for the watch and turn “Text Input” on.
10. Pairing is now complete
Different ways to pair your watch
Pairing an iOS device:
Turn on your watch, and make sure it is within a few feet of your phone.To sync the One61 Smartwatch for notifications,
pair using Bluetooth Low Energy (BLE):
1. Launch the One61 Smartwatch app and login
2. Tap “Me” at bottom right corner
3. Tap “Pair Watch” and tap your watch name to starting pairing
To sync the One61 Smartwatch for hands free functions, pair using Bluetooth Classic:
1. In the device going to: Settings > Bluetooth
2. Tap on your One61 Smartwatch name to pair device
3. Once paired, tap on the info icon next to the Smartwatch name
4. Enable “Show Notifications” and “Sync Contacts”
5. Close Settings
Pairing an Android device:
Turn on your watch, and make sure it is within a few feet of your phone.
To sync the One61 Smartwatch for notifications, pair using Bluetooth Low Energy (BLE):
1. Launch the One61 Smartwatch app and login
2. Tap “Me” at bottom right corner
3. Tap “Pair Watch” and tap your watch name to starting pairing
To sync the One61 Smartwatch for hands free functions, pair using Bluetooth Classic:
1. In device going to: Settings > Bluetooth
2. Tap on your One61 Smartwatch name to pair device
3. Once paired, tap on the gear icon next to the Smartwatch name
4. Enable “Call audio” and “Text input”
5. Close Settings
Un-Pairing device:
Option 1:
Unpair the One61 Watch from the mobile app and device. Note: unpairing from the app will reset your watch to factory
settings. Go to: Me > [your] Device > Unpair Watch > Confirm.
Option 2:
Turn off the Bluetooth off from your device reset through the One61 watch by Going to: Settings > Reset > Confirm Reset.
Note, this will erase all the data from the watch and reset your watch to factory settings.
Get to know your One61 Smartwatch
Watch Face/Home Screen (where you see the time) Start by waking up your watch. If your watch’s screen is off,
you can wake up the watch by:
- Turning your wrist so your watch face is upright. - Pressing the button on the watch. Change the watch face: Tap and
hold anywhere on the watch face screen for two seconds. Swipe right or left to browse the designs, then Tap “Okay”
to choose one.
Scrolling Menu:
You can see all of the applications from here.
1. Start by waking up your watch. If your watch’s screen is off, you can wake up the watch by:
- Turning your wrist so your watch face is upright
- Pressing a button on the watch
You can also see a menu of things you can do, right on your watch:
2. Swipe left to access the menu
3. Swipe up or down to see different menu options
4. To choose an option, just tap it.
Watch tips
WHAT YOU WOULD LIKE TO DO
ACTION
Wake watch to view home screen
Turning your wrist so your watch face is upright.
Pressing a button on the watch
Change watch face
Tap and hold anywhere on the watch face screen for two
seconds. Swipe right or left to browse the designs,
then Tap “Okay” to choose one
Access Menu
Turn the watch on and swipe to the left to
access Menu options
View Setting
Turn the watch on and swipe to the left to access
Menu options. Swipe up or down until you see
“Settings” and Tap it
See your remaining battery life
Turn the watch on and swipe to the left to access Menu
options. Battery Icon will be in the top right corner
Increase Battery life
Leave default settings for optimal battery life
Keep default screen brightness low
Keep default volume low
Keep default sound alert Ring only
Note: Vibrate will consume more battery
Check Bluetooth connection
Turn the watch on and swipe to the left to access Menu
options. Bluetooth Icon will be in the top left corner.
A Blue/Green icon means you are connected to both
Classic and BLE. Solid Blue means only Classic. Solid Green
means only BLE
Control Music
Open Music player on device.
From the watch face (home screen) Swipe left to
access the menu. Swipe up or down until you see
“Music Controller” and tap it
Control Camera
Open Camera on device. From the watch face
(homescreen) Swipe left to access the menu. Swipe up or
down until you see “Camera Controller” and tap it.
Bluetooth status
ICON
MEANING
Connected to the device through both Bluetooth
(BLE and Classic)
Connected to the device through BLE only
Connected to the device through Classic only
Disconnected from device
Battery status
ICON
MEANING
100% battery full
50% battery remaining
10% battery remaining
Other icons
ICON
MEANING
Patrol Reminder (Sedentary Reminder) ON
Notification/Message
Alarm ON
Do Not Disturb/ Sleep Monitoring ON
Power Saving mode ON
Sleep Monitoring ON
Anti-Lost ON
What can your One61 Smartwatch do?
Track your fitness and health
- Crime Fighting (Step Tracking)
- Patrol Reminder (Sedentary Reminder)
- Sleep Monitoring
Device Integration
- Contacts
- Call Logs
- Messages Log
- Phone Dialer
- Voice Assistant
Features and Functions
- Notifications
- Music Controller
- Camera Controller
- Phone Finder
- Calendar
- Alarms
- Stop Watch
- Timer
- Do Not Disturb
- Settings
Track your fitness and health
Crime Fighting (Step Tracking)
This application will track the number of steps, calories burned, and distance covered.
Unlock character-based content for each milestone achieved per day. The data will reset at midnight each night.
Setting Step Goals:
This is completed during profile setup
View Steps Goals:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Crime Fighting” and tap it.
3. Status view - steps, calories, and distance
4. Swipe left to view the character celebrations that have been unlocked
5. Swipe left to access “Step Goal” or “Pedometer Switch”
Change step goal in the Smartwatch:
The new step goal chosen in the Smartwatch will be synced with the app.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Crime Fighting” and tap it.
3. Status view - steps, calories, and distance
4. Swipe left to view the character celebrations that have been unlocked
5. Swipe left to access “Step Goal” and Tap it
6. Set new goal
Change step goal in the app:
The new step goal chosen in the app will be synced with the Smartwatch.
1. Make sure the watch is Paired to the App
2. Open the One61 Smartwatch app, tap on “Me” in bottom right corner
3..Tap “Profile” do edit the step goal
4. Tap “Goal” and select new goal and confirm
Patrol Reminder (Sedentary Reminder)
This application sends a reminder notification to stand up and move around.
Setting Patrol Reminder:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Patrol Reminder” and tap it.
3. Tap “Minutes” to edit the reminder interval and Tap “Ok” when done
4. Tap “On” to activate or “Off” to deactivate the patrol reminder function
Sleep Monitoring
This application will monitor the quality of sleep every night. (Restful, Light, Awake)
Setting Sleep Monitoring:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Sleep” and tap it.
3. Swipe left twice to access Sleep settings
4. Tap “Switch” to enable or disable sleep monitoring (not available in all models)
5. Tap “Time to sleep” to adjust the time you go to sleep (not available in all models)
6. Tap “Time to get up” to adjust the time you wake up (not available in all models)
7. Tap “Smart wakeup” to enable or disable smart wake up alarm (not available in all models)
Device Integration
Contacts
This application will sync with the device’s contacts. The watch can store more than 1500 contacts.
View Contacts:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Contacts” and tap it.
3. Tap “Sync with phone” to sync all contacts
4. Tap “Hide” to allow syncing in the background
5. Tap “Cancel” to stop syncing
Calling a contact:
The call audio will default to the smartwatch speaker.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Contacts” and tap it.
3. Swipe up or down until you see the contact you want to call, or swipe left to access quick search and
tap on alphabet you need
4. Tap the name to dial out
5. Tap “End” to end the call
In the connected device, you can choose the audio source for the call, example – Phone, Speaker, Smartwatch or any other
Bluetooth device. Audio will be directed to the device you choose.
Call Logs
This application will sync and pull the device’s call logs. The call audio will default to the smartwatch speaker.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Call Logs” and tap it.
3. Swipe up or down until you see the contact you want to call and tap the name
4. Tap the number to dial out
5. Tap “End” to end the call
In the connected device, you can choose the audio source for the call, example – Phone, Speaker, Smartwatch or any
other Bluetooth device. Audio will be directed to the device you choose.
Messages Log
This application sync and pull the connected device’s messages or SMS history. Note that iOS does not
support this functionality.
Reply to a Messages:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Messages” and tap it.
3. Swipe up or down until you see the message you want to reply to
4. Tap on “Reply” and select from pre-defined text and Tap “Reply”.
Call from Messages:
This application will place a call using the device through the Bluetooth connection. The call audio will default
to the smartwatch speaker.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Messages” and tap it.
3. Swipe up or down until you see the message you want to reply to
4. Tap on “Call” to dial out
5. Tap “End” to end the call
Phone Dialer
This application will place a call using the device through the Bluetooth connection. The call audio will default
to the smartwatch speaker.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Phone Dialer” and tap it.
3. Enter the phone number that you want to call
4. Tap phone icon on the bottom left to dial out
5. Tap “End” to end the call
In the connected device, you can choose the audio source for the call, example – Phone, Speaker, Smartwatch
or any other Bluetooth device. Audio will be directed to the device you choose.
Voice Assistant
This application will trigger the connected device’s voice assistance. Example, will an iPhone the watch will
trigger “Siri” and with Android will trigger “Ok Google” or “Bixby” or “S Voice” etc.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Voice Assistance” and tap it.
3. Tap and hold on the trigger button to activate
4. Wait for the response tone
5. Now talk to your voice assistant. For example, say “What is the weather today?”
Features and Functions
Notifications:
This application will sync with the connected device to log and display notifications
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Notifications” and tap it.
3. Swipe up or down to scroll through unread notifications Note, these are sorted time of arrival.
4. Tap phone icon on the bottom left to dial out
5. Tap “End” to end the call
When connected to the device, all the new notifications will be shown as a pop up on the home screen.
Clearing Notifications:
Once the connected to the device’s notifications is cleared, it will also be cleared from the notification
log in the Smartwatch.
Music Controller:
This application will control the music player on the connected device. Before using Music Controller open
the music application on the connected device. The scrolling bar will show what song is currently playing.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Music Controller” and tap it.
2. Tap on play/pause icon to play music
3. Tap on play/pause icon to pause music
4. Tap on “+” or “-“ to increase or decrease the music volume
5. Tap on forward icon to forward music and play next file
6. Tap on backward icon to backward music and play previous file
Camera Controller:
This application will control the camera and act as a trigger for the connected device, Before using Camera
Controller open the camera application on the connected device.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Camera Controller” and tap it.
3. Tap on camera icon to take a photo through the device
Phone Finder:
In the Smartwatch, use this application to find the connected mobile phone. Note, for IOS the One61 Watch
app always running in the background.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Phone Finder” and tap it.
3. Tap and hold the find phone icon to locate alarm on paired device
4. Tap the find phone icon stop the locate alarm
Calendar:
This application shows a calendar view
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Calendar” and tap it.
3. Once open you will see today’s date
4. Swipe up or down to see upcoming dates or previous dates
5. Tap on “Month” to see the full month view
4. Swipe up or down to see upcoming month or previous month
Alarms:
This application will to Set, Edit, and Delete multiple alarms. You can add up to 5 Alarms
Add new Alarm:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Alarms” and tap it.
3. Tap to add new alarm
4. Set time, repeat type, alarm tone, and alert type (alert type not ailale in all models) then tap save, by
default, the Alarms added will be in OFF state
5. Tap ON (to turn on Alarm)
6. Tap OFF (to turn off Alarm)
Editing Alarm:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Alarms” and tap it.
3. Tap on alarm time
4. Now edit Set time, repeat type, alarm tone, and alert type then tap save, by default, the Alarms added
will be in OFF state
5. Tap ON (to turn on Alarm)
6. Tap OFF (to turn off Alarm)
Deleting Alarm:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Alarms” and tap it.
3. Tap and hold alarm time
4. Tap “Ok” to delete
Adding multiple Alarms:
1. After setting up your first alarm, swipe down to add additional alarms
2. Set time, repeat type, alarm tone, and alert type then tap save, by default, the Alarms added will be in OFF state
3. Tap ON (to turn on Alarm)
4. Tap OFF (to turn off Alarm)
5. Repeat this process to add up to 5 different Alarms
Stop Watch:
This application will activate a stop watch.
Start stop watch:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Stopwatch” and tap it.
3. Tap on “start” to start the stopwatch
4. Tap on “Pause” to stop the stopwatch
5. Tap on “Reset” to reset the stopwatch to 0
Timer:
This application will activate a timer.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Timer” and tap it.
3. Swipe up or down to choose from predefined timers
3. Tap on predefined timer to start the timer
4. Tap on “Pause” to stop the timer
5. Tap on “Start” to restart the timer
6. Tap on “Cancel” to exit the timer
Custom timer:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Timer” and tap it.
3. Swipe up or down to choose from predefined timers
3. Tap on “Custom” to create custom timer
4. Swipe up or down to select Hour
5. Swipe up or down to select minute
6. Tap on “Set timer” to restart the timer
7. Tap on “Pause” to stop the timer
5. Tap on “Start” to restart the timer
5. Tap on “Cancel” to exit the timer
Do Not Disturb:
This application will to turn ON or OFF “Do Not Disturb”, DND will silent/stop alerts and will turn off
Gesture display on. To activate the display press button on side.
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Do Not Disturb” and tap it.
3. Current status will show as “Off” or “On”
4. Tap “Off” to change the state to ON
5. Tap “On” to change the state to OFF
Settings:
1. From the watch face (home screen) Swipe left to access the menu
2. Swipe up or down until you see “Setting” and tap it
3. Swipe up or down to choose from setting options
Bluetooth: (Home screen > Settings > Bluetooth) This will control Bluetooth power and visibility
- Power: Tap “Power” to toggle Bluetooth ON or OFF state.
- Visibility: Tap “Visibility” to toggle Bluetooth visibility ON or OFF state.
Clock: (Home screen > Settings > Clock) This will change watch face, date, time, and time format
- Watch face: Tap “Clock type”and swipe left or right to choose a watch face and then tap “ok”
- Date: Tap “Date” and scroll up and down to manually select the date and then tap “ok” to set the date
- Time: Tap “Time” and scroll up and down to manually select the time and then tap ‘ok’ to set the time
- Time format: Tap “Time format” to select 12-hour format or 24-hour format
Sound: (Home screen > Settings > Sound) This will change Alert type, Ringtone, and Notification tone
- Alert type: Tap “Alert type” and scroll up or down to select the desired alert type the available options
(Ring only, Vibrate only, Vibrate and Ring, Vibrate then Ring, and Mute)
- Ringtone: Tap “Ringtone” and scroll up or down to select the desired ringtone the available options
- Notification tone: Tap “Notification tone” and scroll up or down to select the desired notification tone
the available options
Volume: (Home screen > Settings > Volume) This will adjust the volume levels for Multimedia, Ring, Notification
- Multimedia: Tap “Multimedia” and tap “ + ” to volume up and tap ” -- “ to volume down, then tap “ok” to save
- Ring: Tap “Ring” and tap “ + ” to volume up and tap ” -- “ to volume down, then tap “ok” to save
- Notification: Tap “Notification” and tap “ + ” to volume up and tap ” -- “ to volume down, then tap “ok” to save
Display: (Home screen > Settings > Display) This will adjust the Main menu style, Brightness, and Screen time out.
- Main menu style: (1 app view [default] or 4 app view) Tap “Main menu style” to select 1 app view or 4 app view
- Brightness: (level 1 [default] to 5 max) Tap “ Brightness” and tap “ + ” to increase brightness and tap ” -- “ to
decrease brightness, then tap “ok” to save from Keep it low to get longer battery life.
- Screen time out: Choose the screen time out or time taken by the display to turn off after an inactivity in the screen.
Keep this low to get longer battery life.
Language: (Home screen > Settings > Language) This will adjust the language displayed in the watch.
- Auto Sync: (watch will match to the device’s language, if available, If not available will default to English)
Tap “Auto Sync” to toggle ON or OFF state
- Manually set Language: (With “Auto Sync” turned OFF) Scroll up and down to manually select the Language
Motion: (Home screen > Settings > Motion)
- Wake-up gesture: This will recognize your gesture to “wake up” the watch and show the watch face (home screen)
or the timer/stop if activated. Tap “wake-up gesture” to toggle ON or OFF state
NOTE: To wake up the One61 smartwatch, raise the hand that is wearing the Smartwatch and look at the
Smartwatch’s screen for few seconds. The screen will turn on and show watch face (home screen) or the
timer/stop watch that you activated.
Power Saving: (Home screen > Settings > Power Saving) This will Enable or Disable power saving mode
- Tap “Power Saving Mode” to toggle ON
- Tap “Exit Power Saving” to toggle OFF
NOTE: Once Smartwatch enters power saving mode, a power saving icon will appear on top of the home screen. If the
Smartwatch exits power saving this icon will disappear.
NOTE: Smartwatch will enter Power saving mode automatically if the battery on the Smartwatch is less then 10%. This mode
will turn off Bluetooth, set the Brightness to level 1, and set the screen time out to 5 seconds to save power. Place One61
Smartwatch on the charging cradle for charging. Once the battery is above 10% and removed from the charging cradle,
watch will automatically exit power saving mode and turn on Bluetooth inorder to reconnect to the device.
About: (Home screen > Settings > About) This will display device information
- Device Name
- Device MAC address
- Bluetooth LE MAC address
- Connected Services
- LE Connected Status
- Software Version
- Hardware Version
- Software Release
Replace the Watch Strap
Removing the Old Strap:
Slide the strap’s spring bar inwards and separate the strap from the One61 Smartwatch case.
Installing a New Strap:
Insert one end of the spring bar into the case lug’s pinhole, slide the spring bar inwards, and connect the strap.
Get to know your One61 Watch APP
Launch One61 Watch app and login
Login:
1. If you have not created an account reference section “Here’s how to pair:“)
2. Tap “Signin”
3. Enter your valid email address
4. Enter a password
5. Tap “Submit” and the app will open to current steps
NOTE: The APP will automatically sync with the watch when opened and will sync once every hour automatically.
Steps: (home screen)
Tap on “Steps” icon to view current Steps, Distance and Calories burned during steps. User can view Step Chart:
Step activity per hour
- Steps History:
Tap on the “Current Steps” circle to access step history data
User can view step history for 7 days, 4 weeks, and 1 year
User can view Average Steps, Average Distance, and Average Calories
Sleep:
Tap on “Sleep” icon to view Last Night Sleep, current total sleep time (hh:mm), restful sleep time (hh:mm), light sleep time
(hh:mm). User can view sleep chart: indicates ratio of (Restful + light)/sleep time
- Sleep History:
Tap on the “Total Sleep” circle to access sleep history data
User can view step history for 7 days, 4 weeks, and 1 year
User can view Average Total Sleep, Average Restful Sleep, and Average Light Sleep history
ME:
Tap on “ME” Gear icon to view Pairing Status Find Watch, Anti-Lost, Profile, Privacy Policy,
Terms of Service, Contact Us, Version
- [Name] Smartwatch Pairing Status:
User can view paired status and Last Sync time
Tap [name] Smartwatch to Pair or Unpair device
- Find Watch:
This will help user locate paired One61 Smartwatch
Tap “Find Watch” to alert paired One61 Smartwatch. Note: unpaired/out of range watch will not alert
Tap “Stop” in the app or “OK” on the smartwatch to silence alert
- Anti-Lost:
This will alert the user when the One61 Smartwatch moves out of range of the paired device
Tap “Watch Alert” to toggle ON or OFF. If on the watch will alert when paired device moves out of range
Tap “Phone Ring” or “ Phone Vibrate” to toggle ON or OFF. If on the device will alert when paired watch
moves out of range
NOTE: The alert is triggered by a Bluetooth disconnection
- Profile: (Completed during initial account creation)
User can view and update profile settings (profile image, username, gender, height, weight, daily step goal)
- Logout:
User can logout of the One61 Watch App
NOTE: Once user logs out the One61 Watch App, One61 Smartwatch will unpair and reset to Factory Setting.
- Privacy Policy
Tap on the “Privacy Policy” section to access the privacy policy
- Terms of Service
Tap on “Terms of Service” section to access our terms of service
- Contact Us
Tap on “Contact Us” section to contact us via email
- One61 Smartwatch App Version:
Always keep your One61 Watch app updated through the App store.
User can view app version number