Before using the TV, please read this manual thoroughly
and retain it for future reference.
Any content and service accessed through this device, while only intended for individual non-commercial
use, shall be the property of the applicable third party and subject to protection by regulations and laws on
copyright, patent, trademark and other intellectual property rights. No part of such content and service may be
modified, duplicated, published, uploaded, distributed, translated, marketed, or used to make and distribute
products derived from it without the prior permission of the content owner or service provider.
You acknowledge and agree explicitly that you will solely bear the risk associated with the use of this device,
and further you will solely bear any risk related to satisfactory quality, performance and accuracy for any
content and service accessed through this device. To the maximum extent permitted by applicable law, this
device and any third party’s content and service is provided as it is without any guarantee, express or implied.
Manufacturer hereby declare explicitly that Manufacturer shall not be held liable for any guarantee and
conditions, express or implied, related to this device and any content and service, including but not limited to
warranty on marketability, satisfactory quality, fitness for a particular purpose, accuracy, quiet use and nonviolation of any third party’s rights; to the maximum extent permitted by applicable law, Manufacturer gives
no guarantee on the accuracy, validity, timeliness, legitimacy and completeness of any content or service
provided through this device, or the fitness of such device, content or service for your particular requirement,
or the protection from interruption and error during operation of such device, content or service; to the
maximum extent permitted by applicable law, in any case, including fault or neglect, Manufacturer shall not be
held liable for legal actions or indemnity obligation arising from any consequence as a result of or related to
any information loaded in this device or use of such device, content or service by you or any third party .
Any content and service provided as it is together with this device shall be the property of the applicable third
party, therefore Manufacturer gives no declaration or warranty on modification, suspension, cancellation,
termination or abortion thereof, and shall not be held liable for legal actions or indemnity obligation arising
Manufacturer reserves the rights to restrict the use or access of certain content or service. As the content and
service are transmitted through third party’s network and transmission facilities, Manufacturer undertakes no
customer service thereof or the obligation for such customer service.
Important Safety Precautions
This symbol alerts user about the presence of a
dangerous voltage not isolated inside the product
which can be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the presence of
important operating instructions and maintenance in
the document enclosed in the package.
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.
Disposal of Used Electrical & Electronic Equipment
Packaging and electrical goods should be recycled appropriately, and not treated as
household waste. Please dispose of this equipment at your applicable collection point for the
recycling of electrical & electronic equipment waste. By ensuring the correct disposal of this
product, you will help prevent potentially hazardous to the environment and to human health,
which could otherwise be caused by unsuitable waste handling of this product. The recycling
of materials will help conserve natural resources. Please do not therefore dispose of your old
electrical and electronic equipment with your household waste. For more detailed information
about recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television set.
Only using furniture that can safely support the television set.
Ensuring the television set is not overhanging the edge of the supporting furniture.
Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.
Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. A note about safety and operating instructions
Read and follow all safety and operating instructions, and retain them safely for future reference.
Important Safety Precautions
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners
can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Wall Bracket
After market brackets may be available to purchase locally. Please refer to the specification page of Quick
Setup Guide for dimensions.
5. Water and Moisture
Avoid dripping or splashing of liquids onto the product. Objects filled with liquids, such as vases, should not be
placed on the product.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can cause the
TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a cart, stand, bracket or
table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the TV and to
protect it from overheating. Do not cover the ventilation openings in the cabinet and never place the set in a
confined space such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10cm gap all
around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
9. Power-Cord Protection
Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit
from the TV. MAIN plug is used as the disconnect device, the disconnect device shall remain readily operable.
10. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning or power-line surge.
11. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them
might be fatal.
12. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
Important Safety Precautions
13. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or
short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges.
15. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following
(a)When the power - supply cord or plug is damaged.
(b)If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d)If the TV does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result
in damage and will often require extensive work by a qualified technician to restore the TV to its normal
(e)If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
17. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
18. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to
determine that the TV is in safe operating condition.
19. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more
Basic Features
Turning your TV on or off.............................................................2
Completing the First-Time Setup Menu.......................................2
Shortcuts Instructions..................................................................4
Using the Setting Menu...............................................................8
Using the Quick Settings Menu...................................................8
Using the Picture Menu...............................................................9
Using the Sound Menu..............................................................10
Using the Network Menu...........................................................11
Using the Channel Menu...........................................................11
Using the System Menu............................................................12
Using the About TV Menu..........................................................13
Advanced Features
Using the Home Menu...............................................................14
Using Anyview Cast to mirror content from your device to the TV....17
Other Information
Trouble Shooting.......................................................................18
Illustrations are for your reference only!
Basic Features
Turning your TV on or off
To turn your TV on or off:
1. Plug the AC power cord into a socket outlet of AC power supply.
2. When the TV is powered on, press the [Power] button on the remote control, it goes into standby mode.
Press the [Power] button again to turn on your TV.
• When your TV is in standby mode, it is still consuming power. To completely disconnect power, please
remove the plug from the mains socket.
• If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Completing the First-Time Setup Menu
IMPORTANT: Make sure that the antenna or cable is connected and a wired or wireless Internet
connection is available.
After the splash screen that displays the logo appears, begin the first-time setup menu.
• All the Pictures are Only for Reference, and that may not match with the actual machine, Please subject
to the actual models.
1. Language
Installation Guide
Press the [˄ / ˅] buttons and then press the [OK]
button on the remote control to choose your
2. Country
Installation Guide
Select the location where you will operate the TV
and move to the next menu.
Basic Features
3. Time Zone
Installation Guide
Select the local time zone according to your region,
and move to the next menu.
Time Zone
Kaliningrad GMT+2
Moscow GMT+3
Samarra GMT+4
4. Disclaimer
Installation Guide
Select accept the Disclaimer and move to the next
click to review the detail of our disclaimer terms
①②③ ④⑤⑥
5. Network
Set Network
If your TV does not automatically detect a Wired
connection, then select Wireless. When you’re
done, select your network from the list that displays
and move to the next menu.
Wired network has been detected to help you automatically connect.
Use Wireless Network
①②③ ④⑤⑥
6. Mode
Set TV mode
Select TV Mode Setting: Home Mode or Store
Mode. Home Mode is the recommended setting
which offers full functionality of the television and
move to the next menu.
Home Mode
Store Mode
• Store mode should only be selected by
retailers who plan to demonstrate the TV.
①②③④⑤ ⑥
Basic Features
7. Input
TV Input Source
Select how you receive your TV channels. Choose
from one of the sources.
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation.
Selecting the input source
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [INPUT] button on the remote, the list of Input appears.
2. Press the [< / >] buttons to select the input source.
3. Press the [OK] button to confirm your selection.
Using the Live TV
Only some countries support Live TV.
Viewing channel information
As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears
on the top of the screen.
Golden Parks
06:30 Thu,01.July.
09:00-09:30 News
│ SDTV │ 1080i │ 16:9
Leisure Hobbies
The information banner displays the following information:
1. Current date and time
2. Channel Name
3. Channel number
4. Subtitle
5. Lock status
Basic Features
6. Input
7. Program name
8. Show identification
9. Prompt
10.Audio format
11.Program type
12.Start/End time progress bar of the current program
13.Beginning and end time of the next program
If you are watching a particular channel, you can also press the [Info] button on your remote control to view
channel information.
Viewing a Channel List
After you have done an automatic channel scan or are receiving your channels through a cable provider, you
can view your list of channels by pressing [OK] or [CH.List] on your remote control.
You will see the channel list display on the right side of the screen.
Creating a Favourite list
To quickly access your most-watched channels, you can create a Favourite list.
To create your Favourite list:
1. Press the [Setting Menu
] button on your remote to display the Settings Menu.
2. Select Channel > Channel Edit > DTV Channel Edit / ATV Channel Edit.
3. Using the [˄ / ˅] buttons of your remote, select a channel and press [OK] button.
A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.
Viewing your Favourite list
To view channels that you’ve added to your Favourite list simply press [OK] or [CH.List] button on your remote
to call out the channel list.
The channel list appears on the right side of the screen and heart-shaped icons are shown next to the
channels that make up your Favourite list. You can press [ < / > ] buttons to switch the Channel List and
Favourite list.
Using the EPG
It provides convenience to check TV programs that will be available in the next 7 days. The information
displayed by the EPG is made available by the commercial television networks for digital channels only. The
EPG also provides a simple way to program the recording of your Favourite programs and a reminder function
which can switch channel automatically at scheduled time so that you do not miss programs of interest. (The
availability and amount of program information will vary, depending on the particular broadcaster).
Press the [EPG] button on the remote control to display channel information on program guide list.
When a current program is selected, press the [OK] button to watch it in full screen mode.
PVR / Remind
1. Press the [˄ / ˅] buttons to select the channels. Press the [< / >] buttons to select program based on the
time schedule.
2. Press the [OK] button on the remote control to select PVR or Remind.
Basic Features
3. Press the [˄ / ˅] buttons to change and set a different options.
• Select and set Start time / Stop time: Press the [< / >] buttons to move to the position you want to set
and then press the [0~9] buttons to input the desired numbers.
• Repeat: You can select from Once, Everyday and Weekly.
• Remind is only available for programs that haven’t been aired yet.
• A storage device must be attached to the television for recording purposes.
• The TV will record the program even in standby mode.
Page Up/Down
Press the [CH+/CH-] buttons to move program listing page up/down.
Program details
Press the [Info] button to show the details of program.
Press the [RED] button to view a list of scheduled reminds and recordings.
Record List
Press the [GREEN] button on the remote control to show the record list.
Press the [YELLOW] button to select the next day programmes.
Press the [BLUE] button to select the yesterday programmes.
PVR / T.Shift
The PVR function allows you to easily record digital television content for later viewing. The function is only
available in DTV source. The format of the storage disk must be either FAT32 or NTFS. The PVR will not
function if a data storage device has not been connected.
• When you insert an NTFS disk, the TV will prompt you to format the disk.
There are two options for recording, the first option is to use Electronic Program Guide (EPG), another option
is to press the [ ˅ ] button.
Press the [ ■ ] button to stop recording and a *.PVR file will be saved. The files can be played back in the
Media Player.
This option allows you to pause and rewind live TV. This function operates by recording temporarily to a
storage device. Please ensure your storage device is connected and there is enough free disk space (1GB).
Otherwise the recording will not commence.
• Press the [T.Shift] button on the remote control and then the menu will appear.
• Press the [
] button to play the live broadcast.
• Press the [ ] button to pause the live broadcast.
• Press the [
] button to watch reverse.
Basic Features
• Press the [
] button to watch advance playback rapidly.
• Press the [ ■ ] button to exit the function and watch the current broadcast.
You can also use the icons on the control bar to achieve these functions above.
• When connecting external hard disk drives please use an external power supply where possible.
Exceeding a total current consumption may result in damage. The maximum current consumption of
USB3.0 is 1A and the maximum of USB1.1 and USB2.0 are 500mA.
• The USB port supports a voltage of 5V.
• The maximum supported storage space of the hard disk is 1TB.
• If you want to store the video streaming of a DTV program, the transfer rate of the hard disk must not be
less than 5MB/s.
• The PVR function is not supported for analogue channels.
• The PVR function is disabled for channels locked with Channel Lock or scrambled channels (CI module
or password needed).
Basic Features
Using the Setting Menu
You can press the [Setting Menu
] button to access the Setting Menu.
The Setting Menu consists of the following settings:
• Quick Settings
Quick Settings
• Picture
• Sound
• Network
• Channel
• System
About TV
• About TV
In each menu, you can:
Press the [˄ / ˅] buttons to select an item.
Press the [˂ / ˃] buttons to adjust the value.
Press the [OK] button to enter the submenu.
Press the [BACK] button to return to previous menu or exit the menu.
Press the [EXIT] button to exit the menu.
• The menus in the user manual may vary slightly from the actual screen.
Using the Quick Settings Menu
Audio Track: In ATV mode, select the audio track if the program has multi
audio tracks.
Subtitle: In DTV mode, select the subtitle if the program has multi subtitles.
Audio Language: Select the audio language.
Teletext: Select the desired teletext of the program that is broadcasting.
Quick Settings
Audio Track
Audio Language
Basic Features
Using the Picture Menu
Picture Mode: If you’d like to configure the settings for your picture, then there
are five types of picture modes available: Dynamic, Standard, Mild, Personal
and Economy.
Once you choose the Personal mode, you can adjust the picture based on the
following settings.
Brightness: Adjust the Brightness level to generate lighter or darker images.
Contrast: Adjust the Contrast level to increase or decrease how bright images
Colour: Adjust the colour intensity of the picture for a more vibrant image.
Tint: Adjust the colors from a green to magenta tint to view the natural skin
tones of people on the screen.
Picture Mode
Aspect Ratio
16 : 9
Advanced Settings
Sharpness: Adjust how sharp or soft edges of images appear.
Backlight: Adjust how bright you want images to appear. Lower settings create
darker images.
Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the
following settings: Auto, 4:3, 16:9, Zoom1 and Zoom2.
Advanced Settings: Adjust advanced picture settings based on your viewing preference.
• OverScan: Change the video size settings to slightly crop the edges of the displayed image.
• Color Temp: Adjust how warm(red) or cold(blue) the white areas of an image appears.
• Dynamic Backlight: Automatically adjust how bright images appear.
• Dynamic Contrast: Automatically darken dark areas and lighten light areas of images to see more
• Noise Reduction: Improve how clear the picture appears by reducing noise.
Basic Features
Using the Sound Menu
Sound Mode: Select a preset sound mode to suit the type of content you are
listening to: Standard, Music, Movie, Sports and Personal.
Set the sound effects to suit your preference.
Configure your audio settings for your sound preferences. You can adjust the
audio based on the following settings:
Surround Sound: Promote the surround sound and bass sound effects.
Sound Mode
Audio Description
AD Volume
• Audio Out: Select the digital audio output format that best suits the audio
device type. For example, choose RAW (which is uncompressed audio
in RAW form) if you have 5.1 Channel Surround Sound Speaker set up.
Choose PCM if you have an amplifier that does not support Dolby Digital
Surround Sound
Advanced Settings
• Digital Audio Delay: Adjust the digital audio output delay time to sync sound
from an external speaker with the images on the TV.
• Lip Sync: Synchronize the displayed image with the audio output.
AVC: Automatically adjusts volume to a consistent level, attenuates loud passages.
Audio Description: This function provides information about actions, characters, scene changes, onscreen text, and other visual content.
AD Volume: Adjust the volume of audio description.
Advanced Settings: Tune the audio settings and quality of the TV.
• Balance: Adjust the left and right speaker strength to optimize audio for a specific location.
• EQ: Boost the volume at different frequencies.
Basic Features
Using the Network Menu
Cable: Choose a wired network connection to access the Internet.
• Mode: Select Auto or Manual configure your IP setting.
• IP / Netmask / Gateway / DNS: Configure the IP setting for your network
Wi-Fi: Choose a wireless network connection to access the Internet.
Network Information
Network Test
• Advanced Settings: Configure the advanced wireless network settings for
the TV. And you can also add wireless network.
• Refresh: Refresh the available wireless network.
• Wi-Fi List: Select an available network to connect.
Network Information: View information about your network connection.
Network Test: Test the network status.
Using the Channel Menu
DVB Antenna: Select Tuner Mode if you receive TV channels over the Air
(antenna), through a Cable (set top box). The input will be used during a
channel scan.
DVB Antenna
Auto Tuning
DTV Manual Scan
• The menu will vary according to the tuner mode.
ATV Manual Scan
Auto Tuning: Automatically scan for channels to view programming from your
TV source.
Channel Edit
DTV Manual Scan: Manual scan TV program in digital signals.
Auto-Update CH List
ATV Manual Scan: Manual scan TV program in analog signals.
CAM Setting
Channel Edit:
• DTV Channel Edit / ATV Channel Edit: You can delete, move, skip and
filter the channels by pressing the Special function buttons ([RED/GREEN/
YELLOW/BLUE]). Also you can add the channels to create Favourite list.
• Export to USB: You can export the channel list to a storage device.
• Import from USB: You can import the channel list from the storage device.
LCN: You can select the Logic Channel Number on or off.
Auto-Update CH List: Select whether auto-update the Channel list or not.
CAM Setting: View CI information.
Basic Features
Using the System Menu
Location: Choose the location from where you will watch your TV.
Time: Set the current time based on your location.
• Mode: Set time manually or select automatic.
• Time Zone: Select your time zone.
Timer Setting
• Daylight Savings: Select Auto Sync, On or Off to apply Daylight Savings
Time to the TV.
• Date: Set the Date.
• Time: Set the Time.
Advanced Settings
Timer Setting: Set the timer.
• Power On Mode: Enable the Power On Timer to OFF, Once, Everyday,
Mon~Fri or Sat~Sun.
• Time:Set the Power On Time.
• Power Off: Enable the Sleep Timer to OFF, Once, Everyday, Mon~Fri or Sat~Sun.
• Time:Set the Power Off Time.
• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Min, 20
Min, 30 Min, 40 Min, 50 Min, 60 Min, 90 Min and 120 Min.
• OSD Timer: Set the amount of time that you’d like for the menu to display: Never, 10s, 20s, 30s, or 60s.
Language: Adjust the default language settings for the TV.
Lock: Turn on Lock to block children from being able to view certain programs. The default password is
• System Lock: Enable or disables all locks. All selected locks can be turned off for parental viewing and
easily turned on again.
• Set Password: Change your password that you use to access Lock. If you want to change your lock
password, first enter the new password then enter the same password again.
• If you forget the password, call the Consumer Electronics Care Center.
• Channel Lock: Block programs by channels when you turn on the Lock feature.
• Parental Guidance: This function allows you to set up blocking schemes to block specific channels and
ratings. You can set the lock channels watched by young people of different ages from 4~18. It operates
according to information from the broadcasting station, therefore if the signal has incorrect information,
this function will not operate.
Application: Set settings for apps on your TV.
• Netflix: Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed
for you service.
• ESN: Display the Netflix Electronic Serial Number.
• Version: Display the version.
HDMI CEC: Configure how to control CEC-enabled devices with your TV remote.
• CEC Control: Allow TV to find and control CEC devices connected to your TV.
• Device Auto Power Off: Automatically turn off HDMI CEC devices when the TV is turned off.
• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
Basic Features
• HDMI ARC: Select the TV speaker or an ARC device for sound output.
• HDMI 2.0 Format: Match the connected device output format. Select Enhanced for devices of 4K, 60Hz,
4:4:4, 4:2:2 or 4:2:0, 10 bit and above.
• Detect: Search all the device connected to the TV.
• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
• The HDMI CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features
do not work.
• Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
Advanced Settings: Access the Advanced Settings menu.
• PVR&Time-Shift Settings:
Select Disk: Select the disk where you want to store your recorded content.
Select Partition: Select the partition where you want to store your recorded content.
Timeshift Size: Select the Time Shift size.
Format: Format the selected disk.
Speed Check: This shows you the transfer rate of your storage device.
• Network Wake Up: When this feature is turned on, you can wake up your TV from Netflix or YouTube on
other device, such as your tablet or phone.
• Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.
• Store Mode: Set the TV to use in Store Mode or not.
Using the About TV Menu
System Information: View system information.
About TV
Disclaimer: Read the Legal Disclaimer.
Upgrade: You can manually check the new version. If there is new version,
click on the Start update icon to download the files. When the download
finished, the TV restarts. Then the software upgrade begins. When the upgrade
finished, the TV restarts.
Reset TV: Restore your TV back to the factory default.
System Information
Reset TV
Advanced Features
Using the Home Menu
The simple design of the Home screen menu makes it easy to navigate. It serves as the central location to
access Premium Apps.
To access the Home screen, press the [Home
] button on your remote control.
Indicators and Icons on the top of the Home screen
You can always view the current time in the top right corner of the Home screen.
If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then an icon
display in the top right corner of the screen. This location makes it very convenient for you to determine if
you still have Internet connectivity as you use the TV.
In addition, if you have connected a device (such as a thumb drive) to a USB port and your TV recognizes
it, then a device icon will also display in the same area.
Inputs that appear on the Home screen
Each time you access the Home screen, the icons for your inputs will display by pressing the [˄ / ˅] buttons.
Inputs that you have connected an external device to will be highlighted. Inputs that do not have an external
device connected to are greyed out.
Advanced Features
Media is a central location for you to view or listen to different types of content (for example, your photos,
music and movies) through the following methods:
• A USB thumb drive or hard drive
• Your mobile phone, tablet or other personal device: You can stream movies, pictures and photos that are
stored on your personal device and play or view the content on your TV.
When you connect your thumb drive or other personal device to the TV, the TV automatically detects it and
displays a prompt.
The USB and Media Server screen
The USB and Media Server screen displays Four panels: Movies, Music, Photos and Files.
File formats that may be supported
• Due to differences in programming tools and other factors, some of the file formats that are listed may or
may not be supported.
File Format
Browsing Content
To browse through content based on the type that you wish to access:
1. Select the Movies, Music, Photos or Files.
2. Select the name of the folder that contains your content.
3. Make your selection to play or view the content.
If you want to close out of the Media center, press the [EXIT] button on your remote control.
Viewing Video
While viewing video you will see a control bar appear at the bottom of the screen. You can use the D-pad
buttons of your remote to select these icons that will control the video.
Viewing Photos as a Slideshow
Select the photos that you want to view and press the [OK] button, the slideshow of your photos begins to
To stop the slideshow, press the [OK] button to call out the control bar, click on the
To restart it, click on the
Advanced Features
Numerous factory-installed apps are available for you to choose from for your entertainment preferences.
Installing an App
Even though your TV has numerous factory-installed apps, there may be others that you’d like to download.
To install an app:
1. From the Home screen, click on the App Store icon.
2. Navigate to the Search tab.
3. Press the [OK] button on your remote to bring up the on-screen keyboard and begin typing the name of the
4. Use the D-pad of your remote to select the app.
5. Press the [GREEN] button to Add to My Apps.
Removing an App
You can only delete apps that you’ve downloaded to the TV. Factory-installed apps can not be deleted.
To delete an app:
1. From the Home screen, use navigation buttons on your remote to select the app that you want to remove.
2. Press the [RED] button of your remote. A dialog message displays that asks if you’re sure you want to
remove the app.
3. Press [OK] on your remote, then the icon is removed from the screen.
• If an app is deleted,the information related to that app is also removed.
Moving App Icons around
To move an app:
1. From the Home screen, use navigation buttons on your remote to select the app that you want to move.
2. Press the [GREEN] button of your remote.
3. Press the D-pad of your remote to move the app.
4. Press [OK] on your remote to confirm.
Advanced Features
Using Anyview Cast to mirror content from your device to the TV
The Anyview Cast is an app that enables you to share (or cast) a video, audio or image from your Androidbased device to the TV.
From your tablet or phone
To mirror content from your tablet or phone to the TV:
] button, go to Media and select the Anyview Cast app.
1. Using your remote, press the [Home
2. Turn on the wireless display function on your Android-based device.
3. Find your TV in the list of devices that displays and select it.
4. Wait for a while and the video or image will display on the TV.
• Some Android-based devices may not support casting.
Other Information
If the TV does not operate as usual or appears to be faulty please read carefully this section. Many operational
issues can be resolved by users.
It is also advisable to unplug the TV form the AC socket on the wall for 60 seconds or more, then reconnect
and start again. This simple procedure helps in restoring stable conditions for electric circuits and firmware of
the unit.
Please contact Manufacturer Customer Care if the problem is unresolved or you have other concerns.
No sound or picture.
Check if the power cord is plugged into a powered AC outlet.
Press the [Power] button on the remote control to activate the
unit from ‘Standby’ mode.
Check to see if LED light is on. If illuminated, power to TV is OK.
I have connected an external source
to my TV and I get no picture and/or
Check for the correct output connection on the external source
and for the correct input connection on the TV.
Make sure you have made the correct selection for the input
mode for the incoming signal.
When I turn on my television, there
is a few second delay before the
picture appears. Is this normal?
Yes, this is normal. That is the TV searching for previous setting
information and initializing the TV.
Picture is normal, but no sound.
Check the volume settings.
Check if ‘Mute’ mode is set on.
Sound but no picture or black and
white picture.
If the picture is black and white, unplug the TV from the AC outlet
and replug it after 60 seconds.
Check that the Color is set to 50 or higher.
Try different TV channels.
Sound and picture distorted or
appear wavy.
An electrical appliance may be affecting TV set. Turn off any
appliances, if interference goes away, move appliance farther
away from TV.
Insert the power plug of the TV set into another power outlet.
Sound and picture is blurry or cuts
out momentarily.
If using an external antenna, check the direction, position and
connection of the antenna.
Adjust the direction of your antenna or reset or fine tune the
Horizontal/vertical stripe on picture
or picture is shaking.
Check if there is interfering source nearby, such as appliance or
electric tool.
Other Information
The plastic cabinet makes a ‘clicking’
type of sound.
Remote control does not work.
Smart Television with wireless
network capability Wi-Fi fail to join a
local network.
The ‘Click’ sound can be caused when the temperature of the
television changes. This change causes the television cabinet to
expand or contract, which makes the sound. This is normal and
the TV is OK.
Confirm that TV still has power and is operational.
Change the batteries in the remote control.
Check if the batteries are correctly installed.
Configure the local wireless router or access point for WPAPSK security before attempting to connect the TV to the Wi-Fi
Follow instruction in the Quick Setup Guide of the television to
setup a wireless connection.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.