RV6**D Digital Series LV6**D Digital Series

00GB_RV-LV685D_Euro.book Page 1 Tuesday, September 1, 2009 10:15 AM
RV6**D Digital
Series
LV6**D Digital
Series
English
00GB_RV-LV685D_Euro.book Page 2 Tuesday, September 1, 2009 10:15 AM
Contents
INSTALLING YOUR TV
CONTROLS AND FEATURES
Difference List between LV and RV Series ................4
General controls .................................................. 20
Selecting positions ......................................... 20
The Time Display – analogue only ................ 20
Stereo and Bilingual transmissions ................. 20
Quick Menu .................................................. 20
Safety Precautions ..................................................5
Installation and important information ....................6
The remote control .................................................7
CT-90327 (for RV series) ..................................7
CT-90326 (for LV series) ..................................8
Inserting batteries and effective range of the
remote ..........................................................8
Sound controls ..................................................... 21
Volume controls and mute sound ................... 21
Dual ............................................................. 21
Bass, Treble and Balance ............................... 21
Advanced Sound Settings .............................. 21
Stable Sound® (LV series only) ....................... 21
Dolby Volume® (RV series only) ..................... 21
Dynamic Range Control ................................. 21
Audio Level Offset ......................................... 22
Headphone Settings ...................................... 22
Audio description .......................................... 22
CONNECTING YOUR TV
Connecting external equipment ..............................9
Connecting an HDMI™ or DVI device to the HDMI
input .................................................................10
To connect an HDMI device ............................10
To connect a DVI device .................................10
Widescreen viewing ............................................. 23
Connecting a computer ........................................11
To connect a PC to the RGB/PC terminal ........11
To connect a PC to the HDMI terminal ............11
Picture controls .................................................... 25
Picture Position .............................................. 25
Picture Mode ................................................. 25
Picture preferences ........................................ 25
Reset ............................................................. 26
3D Colour Management ................................ 26
Base Colour Adjustment ................................ 26
Colour Temperature ...................................... 26
Auto Brightness Sensor Settings ..................... 27
Active Backlight Control ................................. 27
Black/White Level .......................................... 27
Static Gamma ............................................... 27
MPEG NR – Noise Reduction .......................... 27
DNR – Digital Noise Reduction ....................... 27
Resolution+ .................................................. 28
Cinema Mode ............................................... 28
Expert Mode .................................................. 28
Resetting the advanced picture settings .......... 28
Control Visualization ..................................... 29
Automatic Format (Widescreen) ..................... 29
4:3 Stretch .................................................... 29
Blue Screen ................................................... 29
Side panel adjustment ................................... 29
Picture still ..................................................... 29
HDMI Information Display ............................. 29
Controls and input connections .............................12
Switching on ..................................................12
Using the remote control ...............................12
Using the controls and connections ................12
SETTING UP YOUR TV
Startup Application ...............................................13
Quick Setup ...................................................13
Ant/Cable In (if available) ..............................14
Auto Tuning ...................................................15
ATV Manual Tuning ..............................................15
Tuning ...........................................................15
Skip ...............................................................17
Sorting positions ............................................17
DTV Manual Tuning ..............................................18
Manual Tuning ..............................................18
Manual Tuning for DVB-C ..............................18
DTV Settings .........................................................18
Channels .......................................................18
Auto Channel Update ....................................19
DVB Character Set .........................................19
Dynamic Scan ................................................19
Location setting .............................................19
Analogue switch-off .....................................19
Enjoying Photos through the USB port ................... 30
To select the Auto Start function ..................... 30
To open Photo Viewer ................................... 30
Viewing photo files ........................................ 31
Other features ..................................................... 32
Panel Lock ..................................................... 32
TOSHIBA Illumination (RV series only) ............ 32
2
00GB_RV-LV685D_Euro.book Page 3 Tuesday, September 1, 2009 10:15 AM
English
PROBLEM SOLVING
The timers ............................................................32
Programme Timers – digital only ...................32
On Timer .......................................................33
Sleep Timer ...................................................33
Questions and Answers ........................................ 45
INFORMATION
Digital on-screen information and Programme
Guide ................................................................34
Information ...................................................34
Guide ............................................................35
Genre selection/searching .............................35
License Information ......................................... 48
Information .......................................................... 50
Specifications and accessories .............................. 52
Digital settings – parental control ........................36
Setting the PIN ..............................................36
Parental Setup ...............................................36
Digital settings – Channel Options .......................37
Skipping channels ..........................................37
Locking channels ...........................................37
Digital settings – other settings .............................37
Subtitles ........................................................37
Audio languages ...........................................37
Common Interface .........................................38
Software Upgrade and Licenses ............................38
Auto Upgrade ................................................38
Searching for New Software ...........................38
Software Licenses ..........................................38
System Information and Reset TV ..........................39
System Information ........................................39
Automatic Power Down ..................................39
Reset TV ........................................................39
PC Settings ...........................................................39
Horizontal and Vertical Position .....................39
Clock Phase ...................................................39
Sampling Clock .............................................40
Reset .............................................................40
Input selection and AV connections .......................40
Input selection ...............................................40
External input skip .........................................40
Input signal selection .....................................41
PC Audio .......................................................41
HDMI 1 Audio ...............................................41
HDMI Settings ...............................................41
Digital Audio Output ......................................42
TEXT SERVICES
Text services .........................................................43
Selecting modes ............................................43
Text information ............................................43
Navigating pages using Auto .........................43
Navigating pages using LIST ..........................43
Control buttons ..............................................44
3
00GB_RV-LV685D_Euro.book Page 4 Tuesday, September 1, 2009 10:15 AM
English
INSTALLING YOUR TV
Difference List between LV and RV Series
Please confirm your TV's specifications in the following table.
NOTE: The model number is on the back of your TV.
Item
RV685D/RV675D
LV685D/LV675D
RV665D
LV665D
—
—
Receiving signal
DVB-T
DVB-C
H.264
Sound
HE-AAC
—
—
Dolby Digital
—
—
Dolby Digital Plus
Dolby Volume
—
—
—
TOSHIBA LOGO Illumination
Remote control
—
CT-90327
—
CT-90326
CT-90327
NOTE: The illustrations of the menu display in this manual show the LV685D as an example.
4
—
CT-90326
00GB_RV-LV685D_Euro.book Page 5 Tuesday, September 1, 2009 10:15 AM
INSTALLING YOUR TV
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND 'LIVE' PARTS.
This equipment has been designed and manufactured
to meet international safety standards, but like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature and are intended to help with all
electronic consumer products. Some points may not
apply to the goods you have just purchased.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
Air Circulation
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights, on or close to
equipment. High temperatures can melt plastic and
lead to fires.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturers’ approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment.
The plug incorporates a special Radio Interference
Filter, the removal of which will impair its
performance.
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO NOT continue to operate the equipment if you are
in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING – excessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the
case.
Do
DO read the operating instructions before you attempt
to use the equipment.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
DO ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on
equipment.
5
English
Safety Precautions
00GB_RV-LV685D_Euro.book Page 6 Tuesday, September 1, 2009 10:15 AM
English
INSTALLING YOUR TV
Installation and important information
Where to install
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen.
Side View
Top View
Fixing strap
Stand clip
Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and
prevent it falling over, secure the TV to the level surface
using the strap located under the table top stand, or to
a wall using a sturdy tie to the clip on the back of the
table top stand.
The LCD display panels are manufactured using an extremely
high level of precision technology, however, sometimes some
parts of the screen may be missing picture elements or have
luminous spots. This is not a sign of a malfunction.
‘P’ Clip
Sturdy tie
(as short as possible)
Fixing strap
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break or
damage the screen. Also please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use
any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (eg: Super Live) and varying the “side panel” brightness (if available on the model) will prevent
permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE: A Toshiba wall bracket or stand, where available, must be used.
6
00GB_RV-LV685D_Euro.book Page 7 Tuesday, September 1, 2009 10:15 AM
INSTALLING YOUR TV
Simple at-a-glance reference for your remote
control.
To access Quick Menu (T)
9
To change programme positions (T)
To change text pages (T)
10 To display the digital on-screen Programme Guide (T)
11 To exit menus (T)
CT-90327 (for RV series)
2
8
12 When using menus, the arrows move the cursor on the
screen up, down, left or right. Press Q to confirm your
selection (T/D)
13 To display on-screen information (T/D)
To access index page in Text mode (T)
1
14 To return to previous menu (T/D)
15 Colour buttons Text and interactive service control
buttons (T)
TOP
To access Top Menu (D)
DVD
DVD Menus (D)
3
4
6
10
NOTE: ROOT and CONTENTS are not used for this
model.
5
7
16 s Stereo/bilingual transmissions (T)
AUDIO To Access Audio menu (D)
9
17 SUBTITLE Digital Subtitles or Analogue TEXT Subtitle
pages if available (T)
SET UP To access Setup menu (D)
8
11
18 Widescreen viewing (T/D)
19 To call up text services (T)
20 When in TV mode:
MENU
On-screen menus
ATV/DTV To switch between ATV (analogue television)
and DTV (digital television)
LIST
To switch between TV and Radio programmes
when in digital mode
r
Picture still
D Analogue time display
12
13
14
15
17
16
18
19
When in Text mode:
A
To reveal concealed text
B
To hold a wanted page
C
To enlarge text display size
D To select a page whilst viewing a normal picture
20
When using the Programme Guide:
Z
- 24 hours
z
+ 24 hours
CC
- 1 page
cc
+ 1 page
1
For On/Standby mode (T/D)*
2
To select device mode (T/D)**
3
Number buttons (T/D)
4
Switch the Audio Description On/Off (T)
5
To select external input sources (T)
To select line input (D)
6
To alter the TV volume (T/D)
7
To mute the TV sound (T/D)
DVD mode:
press V to EJECT
press v to STOP
press c to PLAY
press W/w to PAUSE/STEP
press Z to SKIP-BACK
press CC to REWIND
press cc to FAST FORWARD
press z to SKIP-FORWARD
* T=TV mode, D=DVD mode
** REGZA-LINK mode is not available for this TV.
7
English
The remote control
00GB_RV-LV685D_Euro.book Page 8 Tuesday, September 1, 2009 10:15 AM
English
INSTALLING YOUR TV
12 In TV mode: To change programme positions
In Text mode: To change text pages
CT-90326 (for LV series)
13 In TV mode: To display on-screen information
In Text mode: To access index page in Text mode
14 To access Quick Menu
2
1
3
4
5
6
15 To display the digital on-screen Programme Guide
16 To exit menus
17 When using menus, the arrows move the cursor on the
screen up, down, left or right. Press Q to confirm your
selection
7
18 To display the on-screen menu
19 To return to the previous menu
20 Text control buttons
8
9
13
10
12
11
15
14
16
21 When in Text mode:
A
To reveal concealed text
B
To hold a wanted page
C
To enlarge text display size
D
To select a page whilst viewing a normal
picture
When in TV mode:
D
Analogue time display
17
18
Inserting batteries and effective range of
the remote
19
20
21
CT-90327
1
For On/Standby mode
2
To select external input sources
3
Picture still
4
To call up text services
5
Stereo/bilingual transmissions
6
Digital Subtitles or Analogue TEXT Subtitle pages if
available
7
Number buttons
8
Switch the Audio Description On/Off
9
To switch between ATV (analogue television) and DTV (DTV
TV/DTV RADIO/DTV TEXT if available)
CT-90326
Remove the back cover to reveal the battery compartment and
make sure the batteries are inserted the proper way. Suitable
battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 48 of this
manual. Warning: batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced, the batteries may need replacing.
10 To alter the TV volume
11 To mute the TV sound
8
00GB_RV-LV685D_Euro.book Page 9 Tuesday, September 1, 2009 10:15 AM
CONNECTING YOUR TV
English
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Illustration represents 40LV685D.
OPTICAL DIGITAL AUDIO OUTPUT
RGB/PC INPUT
HDMI™ INPUT
SOCKETS
COMPONENT VIDEO INPUT (EXT 3)
SCART 2 (EXT 2)
SCART 1 (EXT 1)
POWER switch
*a decoder could
be Digital Satellite or
any other compatible
decoder.
Antenna/Cable
FIXING STRAP
decoder*
media recorder
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner's manuals for all additional equipment must be
referred to for exact instructions.
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
If connecting S-Video equipment, set EXT 2 Input mode to SVIDEO. See page 41.
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press o to select between DTV, EXT 1, EXT 2, EXT 3,
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
The SCART output will also be muted in EPG mode.
The Digital Audio Output socket enables the connection of a
suitable surround sound system. NOTE: this output is always
active.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
video output.
Manufactured under license from Dolby Laboratories.
For acceptable video or PC signal formats through the HDMI
terminals, see page 51.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc.
in the United States and other countries.
9
00GB_RV-LV685D_Euro.book Page 10 Tuesday, September 1, 2009 10:15 AM
English
CONNECTING YOUR TV
Connecting an HDMI™ or DVI
device to the HDMI input
To connect a DVI device
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 51.
Connect an HDMI-to-DVI adapter cable (HDMI type A
connector) to the HDMI 1 terminal and audio cables to the PC/
HDMI1 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 6.6
ft (2m).
• An HDMI-to-DVI adapter cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 1 Audio” on page 41.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
following options (Lip Sync, INSTAPORT™) to “Off”. Your
early HDMI source should operate properly with your
television. See page 41.
• Supported Audio format: Linear PCM, sampling rate 32/
44.1/48kHz.
To connect an HDMI device
Audio cable for HDMI to
television connection
(not supplied)
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo (
).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 1 Audio” on page 41.
The HDMI 4 terminal is located on the side of the television.
DVI device
VIDEO
L
HDMI-to- DVI
adapter Cable
DVI /HDCP
OUT
AUDIO
R
IN
OUT
L
R
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
HDMI cable
HDMI device
VIDEO
L
AUDIO
R
HDMI OUT
IN
OUT
L
R
To view the HDMI device video, press the o button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwidth digital content protection, which is
being standardized for reception of high-definition video signals. Because
this is an evolving technology, it is possible that some devices may not
operate properly with the television.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
10
00GB_RV-LV685D_Euro.book Page 11 Tuesday, September 1, 2009 10:15 AM
CONNECTING YOUR TV
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the televisions speakers.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Manual Settings in the
SETUP menu, Colour, Tint, Sharpness and Black/White
Level in the PICTURE menu.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
To connect a PC to the RGB/PC terminal
To connect a PC to the HDMI terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO) socket. Select PC
from the PC/HDMI 1 Audio options in the AV Connection
menu located in the SETUP menu.
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adapter cable and an analogue audio
cable.
the back of your television
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not necessary
(see page 10).
the back of your television
Mini D-sub
15 pin connector
Computer
Audio cable for PC to
television connection
(not supplied)
Computer
HDMI-to-DVI
adapter cable
RGB PC cable
(not supplied)
Conversion
adaptor if required
(not supplied)
Audio cable
for PC to
television
connection
(not supplied)
For acceptable PC and video signal formats, see page 51.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 50.
To display the optimum picture, use the PC setting feature (see
page 39).
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 1 analogue audio input terminal (see page 41).
• Some PC models cannot be connected to this television.
• An adapter is not needed for computers with a compatible
mini D-sub 15-pin terminal.
• Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multiangle scenes.
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
11
English
Connecting a computer
00GB_RV-LV685D_Euro.book Page 12 Tuesday, September 1, 2009 10:15 AM
English
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
Standby
Illustration represents 40LV685D.
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module
(CAM).
Contact a service provider.
POWER switch
USB port
To access photo
files
HDMI 4 INPUT
(Not available on
all models.)
Input 3 (side)
will take priority over
EXT 3 (back) if both
connections are used
at the same time.
ORANGE LED - Programme
timer set (digital only)
RED LED – Programme
timer Active (digital only)
INPUT 3
(EXT 3)
RED LED – Standby
GREEN LED – Power on
GREEN LED – On Timer set
Switching on
Using the controls and connections
If the RED LED is unlit, check that the mains plug is connected
to the power supply and press the ! (POWER) button on the
left side of the television to switch the television on. If the
picture does not appear, press 1 on the remote control. It may
take a few moments. The GREEN LED will be lit.
To alter the volume press – 2 +.
To put the television into Standby, press 1 on the remote
control. To view the television, press 1 again. The picture may
take a few seconds to appear.
Press MENU to finish.
Using the remote control
To alter the programme position press b p B.
Press MENU and I, i, U or u to control the sound and picture
options.
An S-Video cable provides better picture performance than a
composite video cable. If you connect an S-Video cable to
EXT 3, be sure to disconnect the standard (composite) video
cable or the picture performance will be unacceptable.
To select an external input, press o until the appropriate
input source is selected as described on page 40.
Press MENU on the remote control to display the menu.
Please always refer to the owner’s manual of the equipment to
be connected for full details.
The menu appears as a list of five topics. As each symbol is
selected by pressing C or c on the navigation ring on the
remote control, its respective options will appear below.
NOTE: Interactive video games that involve shooting a "gun"
at an on-screen target may not work with this TV.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, some items are greyed
out in each case.
To operate the menu, press B and b on the remote control to
move up and down, press C or c to select your desired setting.
Follow the on-screen instructions. The functions of each menu
are described in detail throughout the manual.
12
00GB_RV-LV685D_Euro.book Page 13 Tuesday, September 1, 2009 10:15 AM
SETTING UP YOUR TV
g
Before switching on the television, put your decoder
and media recorder, if applicable, to Standby.
To set up the television, use the buttons on the
remote control as detailed on page 7.
Press Q, and the Auto Tuning start up screen will
appear with the option to select between DTV and
ATV, DTV or ATV if available. Use C or c to select the
appropriate mode.
h
Press b or B to highlight Start Scan, and then press
Q.
Quick Setup
Auto Tuning
a
Press the 1 button. The Quick Setup screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
Tuning Mode
NOTE: If Cable is selected in step 6, additional setting
options appear in the Auto Tuning screen. See the
“Ant/Cable In“ section on the next page.
Quick Setup
Menu Language
English
Country
b
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
Germany
Primary Subtitle Language
English
Secondary Subtitle Language
English
Primary Audio Language
English
Secondary Audio Language
English
DTV and ATV
Start Scan
You must allow the television to complete the
search.
Auto Tuning
Progress
Highlight Menu Language and press C or c to select
the menu language.
DTV Tune
ATV Tune
c
Press b to highlight Country and C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list or you want to view DTV programmes but DTV is
not selectable, select Others.
d
Press Q, and the Location screen will appear.
When the search is complete the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
i
Press C or c to view the DTV (digital channel) or ATV
(analogue channel) lists.
j
Use b or B to move through the list to select a
channel, and then press Q to view.
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
In ATV mode some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
Home
Press C or c to select Home or Store. For normal
home use, select Home.
f
Press Q. If the Ant/Cable In screen appears, press
C or c to select Antenna or Cable.
2
Waiting...
Channel: C7
Location
e
Found
3%
REMEMBER: Press ATV/DTV at any time to select
between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT
if available) modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
Ant/Cable In
PLEASE NOTE
Antenna
The Reset TV menu can also be accessed at any
time from the SETUP menu.
13
English
Startup Application
00GB_RV-LV685D_Euro.book Page 14 Tuesday, September 1, 2009 10:15 AM
English
SETTING UP YOUR TV
DTV End Frequency:
Ant/Cable In (if available)
This sets the frequency at which the scan will end.
* Valid entry range for frequency items is 113.000-858.00 for
C-Book/Other and 114.000-858.00 for Nordig-C. If
numbers outside of this range are entered, the values will
automatically be set to the min. or max. valid value as
appropriate.
From this menu, you can set the RF input configuration to
cable.
a
Press MENU, and select SETUP menu.
b
Use b to highlight Ant/Cable In and use C or c to
select Antenna or Cable.
DTV Modulation:
NOTE: When you attempt to change the Ant/Cable
In setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for Auto
Tuning.
c
When Ant/Cable In is set to Cable, the following
setting options will be provided in the Auto Tuning
screen.
Press B or b to select an item, and then press C or c
to select your desired option.
Auto Tuning
Tuning Mode
DTV and ATV
Start Scan
DTV
Scan Type
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
* Valid entry range for Symbol Rate is 4000-7200. If a number
outside of this range is entered, the value will be
automatically set to the min. or max. valid value as
appropriate.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
* Valid entry range for Network ID is 1-65535. If a number
outside of this range is entered, the value will be
automatically set to the min. or max. valid value as
appropriate.
Quick Scan
Start Frequency
Auto
End Frequency
Auto
Modulation
Auto
Symbol Rate
Auto
Network ID
Auto
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
14
00GB_RV-LV685D_Euro.book Page 15 Tuesday, September 1, 2009 10:15 AM
SETTING UP YOUR TV
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Tuning
Auto Tuning will completely re-tune the television and can be
used to up date the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services
are added. All current channels and settings, e.g. locked
channels, will be lost.
a
English
ATV Manual Tuning
Auto Tuning
Press MENU and use C or c to select SETUP menu.
Use b to highlight Auto Tuning. Press Q.
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
Use C and c to move across the screen and select any of the
ATV Manual Tuning options. Then use B or b to adjust the
settings.
ATV Manual Tuning
System: I
SETUP
1
Menu Language
Country
Germany
Ant/Cable In
Antenna
Auto Tuning
DTV Manual Tuning
C
2
0
V C R
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
Tuning Mode
Position:
The number to be pressed on the remote control to tune
the channel.
2
System:
Specific to certain areas.
3
Colour System:
Factory set to Auto, should only be changed if problems
are experienced, e.g. NTSC input from an external source.
4
Skip:
Set Skip to On (8) or Off (() for the selected channel.
See page 17.
5
Signal Class:
The channel classification.
6
Channel:
The channel number on which a station is being broadcast.
DTV and ATV
Start Scan
Use C or c to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press Q to
continue with the Auto Tuning.
9
1
DTV Settings
AV Connection
7
NOTE: If you have selected "Others" for the Country
field in the SETUP menu, and select a tuning mode
other than "DTV" , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
Search:
Search up and down for a signal.
8
Manual Fine Tuning:
Only used if interference/weak signal is experienced. See
page 45.
The television will start to search for all available DTV
and/or ATV services.
9
Station:
Station identification. Use the B or b and C or c buttons
to enter up to seven characters.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
c
A
1 2 3 45 6 7 8
ATV Manual Tuning
b
I
English
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
Use b or B to move through the list to select a
channel, and then press Q to view.
15
00GB_RV-LV685D_Euro.book Page 16 Tuesday, September 1, 2009 10:15 AM
English
SETTING UP YOUR TV
a
Press MENU and using C or c select the SETUP
menu. With b highlight ATV Manual Tuning and
press Q to select.
g
Each signal will be shown on the television, if it is not
your media recorder, press B or b again to restart the
search.
h
When your media recorder signal is found, press c to
move along to Station. With B, b, C and c put in the
required characters, e.g. VCR.
SETUP
Menu Language
English
Country
Germany
Ant/Cable In
Antenna
ATV Manual Tuning
Station: VCR
Auto Tuning
1
ATV Manual Tuning
I
A
C
2
0
V C R
DTV Manual Tuning
DTV Settings
AV Connection
b
Use B or b to highlight the desired position. We
suggest Pos. 0 for a media recorder.
ATV Manual Tuning
Pos. Channel
1
C2
2
3
S10
C7
4
S40
5
C22
6
C25
7
C28
8
C30
Station
i
Press Q to save.
j
Repeat for each position you want to tune or, press
MENU to return to the list of channels and select the
next number to tune.
k
Press EXIT when you have finished.
l
To name external equipment, e.g. DVD on EXT 2, press
o to select o2, then select Manual Settings from
the SETUP menu.
m
Press c to select Label then using B, b, C and c put
in the required characters, and then press Q.
Manual Settings
Label: DVD
Different Channel numbers may be displayed.
EXT 2
c
d
Press Q to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
Press c to select System and use B or b to change if
required.
ATV Manual Tuning
System: I
1
I
A
C
2
0
e
Then press c to select Search.
f
Press B or b to begin the search. The search symbol
will flash.
ATV Manual Tuning
Search:
1
I
A
C
2
0
16
A
D V D
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press Q to
save.
00GB_RV-LV685D_Euro.book Page 17 Tuesday, September 1, 2009 10:15 AM
SETTING UP YOUR TV
Sorting positions
To prevent certain channels from being viewed, positions can be
skipped.
Channels may be moved and saved to the position of your
choice.
a
Select ATV Manual Tuning from the SETUP menu.
a
Select ATV Manual Tuning from the SETUP menu.
b
Use B or b to highlight the position to be skipped and
press Q to select.
b
With the list of channels showing, use B or b to
highlight the channel you want to move and press c.
ATV Manual Tuning
Pos. Channel
1
C2
2
ATV Manual Tuning
Pos. Channel
Station
2
Station
3
S10
C7
4
C40
ABC1
5
C22
ABC1
1
C2
C25
6
C28
7
C25
C28
C30
8
C30
3
S10
C7
4
S40
ABC1
5
C22
ABC1
6
7
8
c
Press c to select Skip.
d
Use B or b to turn Skip on.
Press Q.
c
d
8 on the screen indicates a skipped position.
Use B or b to move through the list to your preferred
position. As you do so, the other channels will move to
make room.
Press C to save your move.
Repeat as necessary, and then press EXIT.
ATV Manual Tuning
Skip: On
1
e
I
A
C
2
0
Press RETURN and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by PU and Pu
or by the controls on the television, but can still be
accessed by the number buttons on the remote
control.
17
English
Skip
00GB_RV-LV685D_Euro.book Page 18 Tuesday, September 1, 2009 10:15 AM
English
SETTING UP YOUR TV
DTV Manual Tuning
DTV Settings
NOTE: This feature varies depending on the Ant/Cable In
setting.
Channels
The channel order may be changed to suit your personal
preference.
Manual Tuning
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
a
Select DTV Manual Tuning from the SETUP menu
and press Q.
a
Select DTV Settings from the SETUP menu and press
Q.
b
Select Channels and press Q.
DTV Settings
Channels
DTV Manual Tuning
Signal Strength
Quality
WEAK
GOOD
AVERAGE
Channel Options
STRONG
76%
Subtitle and Audio
85%
Channel
PIN Setting
Parental Control
13
Local Time Setting
Start Scan
b
c
Auto Channel Update
DVB Character Set
Enter the multiplex number using the number buttons
or use C or c to adjust the number up or down.
c
Highlight Start Scan, and then press Q. The
television will automatically search for that multiplex.
Channels
2
ABC TWO
7
ABC THREE
40
ABC NEWS 24
ABCi
51
Type
When the multiplex is found any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press EXIT to finish.
Off
Standard
With the list of channels showing use b or B to
highlight the channel you want to move and press c.
Pos.
DTV Manual Tuning
0 New Channels - Total 6
New Pos. Name
ABC ONE
1
11:51
TV
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
30
40
CABC Channel
ABC NEWS 24
51
ABCi
d
Use b or B to move through the list to your preferred
position. As you do so, the other channels will move to
make room.
e
Press C to save your move. Repeat as necessary, then
press EXIT.
Manual Tuning for DVB-C
To renumber the highlighted channel, press the RED
button on the remote control.
When Ant/Cable In is set to Cable, DTV Manual Tuning
items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
18
00GB_RV-LV685D_Euro.book Page 19 Tuesday, September 1, 2009 10:15 AM
SETTING UP YOUR TV
Channels
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when
diaplaying the television in a shop, etc.
TV
Pos.
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
30
CABC Channel
ABC NEWS 24
40
5 -
Location setting
- -
a
Select Location from the SETUP menu.
b
Press C or c to select Home or Store.
ABCi
Analogue switch-off
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
Auto Channel Update
If the Auto Channel Update is set to On, when the TV is in
standby mode, digital tuning is automatically executed and any
new channels are saved.
a
Select DTV Settings from the SETUP menu and press
Q.
b
Press b to select Auto Channel Update and use C or
c to select On.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
DVB Character Set
This feature allows you to manually set the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9)
to be used for DVB-C or DVB-T channels.
a
Select DTV Settings from the SETUP menu and press
Q.
b
Press b to select DVB Character Set and use C or c
to select Standard, West or Latin alphabet 9.
Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"Broadcast information has changed. Would you like to
rescan now?" Please follow the message.
a
Select DTV Settings from the SETUP menu and press
Q.
b
Press b to select Dynamic Scan and use C or c to
select On.
19
English
Edit the channel number using the number buttons
and press Q.
00GB_RV-LV685D_Euro.book Page 20 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
General controls
Quick Menu
Selecting positions
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep
Timer etc.
To select a position, use the numbered buttons on the remote
control.
Press QUICK to display the Quick Menu and use B or b to
select the option.
Positions can also be selected using PU and Pu.
Quick Menu
To display on-screen information such as position, input mode
or stereo/mono signal, press
. Press again to cancel.
Picture Mode
AutoView
Picture Size
Super Live
More Information
Sleep Timer
The Time Display – analogue only
The time display facility allows the current (text service) time to
be seen on the television screen.
Press D whilst watching a normal television broadcast to
see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
System Information
NOTE: Quick Menu items are different depending on the
current mode.
Stereo and Bilingual transmissions
For ATV programmes
Mode
Quick menu item
Description
When viewing a
TV programme or
pictures from the
external input
Picture Mode
See page 25.
Picture Size
See page 23.
Channels
See page 37.
More Information
See page 35.
Sleep Timer
See page 33.
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo… Press s to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number and if the word Dual appears
press s to select Dual 1, Dual 2 or Mono.
When using EPG
For DTV programmes
For stereo or dual mono broadcasts, press s and use C or
c to select settings.
Pressing c
Stereo
Stereo S Left S Right
Dual mono
Dual 1 S Dual 2 S Dual
Mono
–
Multichannel
–
0
Headphone Level
NOTE: This display may not be available in some cases.
Mode Display
00:00
Media Player
For multi-audio track broadcasts, press s repeatedly to
change the audio language (see ‘Audio language’ on
page 37).
20
When using
Media Player
Media Player
See page 30.
Headphone Level
See page 22.
System Information
See page 39.
Genre Colour
See page 35.
EPG Update/
Cancel EPG Update
See page 35.
Picture Size
See page 23.
Interval Time
See page 31.
Repeat
See page 31.
00GB_RV-LV685D_Euro.book Page 21 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
Advanced Sound Settings
Stereo Extension
Volume controls and mute sound
Volume
Press Y or y to adjust the volume.
Sound Mute
Press
once to turn the sound off and again to cancel.
Press MENU and C or c to select SOUND.
b
Use b to highlight Dual, and then press C or c to
choose between Dual 1 or Dual 2.
Press b to highlight Dynamic Bass Boost and using
C or c select the desired bass expansion level (Off,
Low or High).
Stable Sound® (LV series only)
The Stable Sound feature limits high volume levels in order to
prevent the extreme changes in volume that can occur when
channels are changed or a programme switches to a
commercial.
a
Select the SOUND menu.
b
Use b to highlight Stable Sound, and then press C
or c to select On or Off.
Dual 1
Bass
0
Treble
0
Balance
0
Dynanic Range Control
Audio Level Offset
Dolby Volume® (RV series only)
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
Off
On
Bass, Treble and Balance
a
Select the SOUND menu.
b
Press b to highlight Bass, Treble or Balance and C
or c to change the setting.
a
In the SOUND menu, press b to highlight Dolby
Volume.
b
Press C or c to select Low, High or Off.
NOTE:
The sound controls are accessible in digital and analogue
modes.
• The Dolby Volume setting influences the Dynamic Range
Control and Digital Audio Output settings.
• If Dynamic Range Control is set to On, this feature will be
disabled.
Dynamic Range Control
This feature allows control of audio compression for some
digital TV programmes. (MPEG-1 and MPEG-2 audio
programmes are not supported.)
Advanced Sound Settings
Stereo Extension, Voice Enhancement, and Dynamic Bass
Boost help to create an enhanced surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer, and wider.
a
b
High
d
SOUND
Dual
On
Dynamic Bass Boost
Press b to highlight Voice Enhancement then press
C or c to select On.
If a programme or film is being broadcast with a soundtrack in
more than one language, the DUAL feature allows selection
between them.
a
Off
Voice Enhancement
c
Dual
Advanced Sound Settings
Stable Sound
English
Sound controls
In the SOUND menu, press b to highlight Advanced
Sound Settings, and then press Q.
Press b to highlight Stereo Extension, and then press
C or c to select On or Off.
a
In the SOUND menu, press b to highlight Dynamic
Range Control.
b
Press C or c to select On or Off.
NOTE:
• For LV series:
If the Stable Sound and Dynamic Range Control features
are both set to On, each effect may not be noticeable.
• For RV series:
This feature is disabled when Dolby Volume is set to Low or
High.
21
00GB_RV-LV685D_Euro.book Page 22 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Audio Level Offset
Headphone Settings
Speaker Link
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or
an external input. Using the Audio Level Offset feature
reduces these volume differences.
a
Set the volume level usually used when watching a
DTV 5.1ch programme.
b
Tune to a channel which is DTV 2ch or ATV, or an
external input.
c
In the SOUND menu, press b to highlight Audio
Level Offset and press Q.
d
Press b to highlight an option, then use C or c to
adjust the volume level.
Headphone Level
Off
50
Audio description
Audio description is an additional narrative sound track for
visually impaired individuals that allows the story line to be
understood and enjoed more fully. If this function has been
activated by pressing the AD key, the letters AD will be
displayed in the channel banner when programmes contain AD
content. You can choose to hear sound from the TV speakers
and the headphone output or only from the headphone output.
Audio Level Offset
a
From the SOUND menu select Audio Description
and press Q.
b
Highlight Audio Description, and then press C or c
to select On.
DTV 2ch
-5
ATV
0
Audio Description
External Input
0
Audio Description
NOTE:
• The available item differs depending on the current input
source. For example, while watching a DTV 2ch programme,
only DTV 2ch is available and the other two items are
greyed out in the menu. This allows you to easily adjust each
item according to each condition.
• When watching a DTV 5.1ch programme, this feature is not
available.
Mixing Level
Speaker Out
On
50
Off
c
To adjust the level of the audio description sound to
the main sound, highlight Mixing Level and use C or
c.
d
Highlight Speaker Out, and then press C or c to
select On or Off.
Headphone Settings
On: sound from both the headphone output and
speakers.
This setting is used to set the sound output when headphones
are connected.
Off: sound from the headphone output.
Speaker
Link
Headphone
See "Headphone Settings" to adjust the headphone
sound.
Speakers
On
Sound is output
No sound
(2 – + is available.)
Off
Sound is output
(Headphone level
menu is available.)
Sound is output
(2 – + is available.)
a
In the SOUND menu, press b to highlight
Headphone Settings, and then press Q.
b
Press b to highlight Speaker Link and use C or c to
select On or Off.
c
If you select Off, then highlight Headphone Level
and use C or c to adjust the headphone sound.
22
00GB_RV-LV685D_Euro.book Page 23 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
English
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.
WIDE
4:3
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9,
20:9 etc.) black bars may be visible
on the top and bottom of the screen.
Use this setting to view a true 4:3
broadcast.
SUPER LIVE
This setting will enlarge a 4:3 image
to fit the screen by stretching the
image horizontally and vertically,
holding better proportions at the
centre of the image. Some distortion
may occur.
CINEMA
When watching ‘all sides panel
format’ films/video tapes, this setting
will eliminate or reduce the black
bars at all sides of the screen by
zooming in and selecting the image
without distortion.
SUBTITLE
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all of the text is displayed.
SUBTITLE
14:9
Use this setting when watching a
14:9 broadcast.
23
00GB_RV-LV685D_Euro.book Page 24 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
NATIVE
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available when in
the HDMI input mode.
PC NORMAL
This setting will show the picture
without over scan, i.e. WYSIWYG.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
PC WIDE
This setting will show the picture
without over scan and side panels.
This option is only available when
watching a PC signal source via
HDMI or PC terminal.
Dot by Dot
“Dot by Dot” is a non-scaling display.
Depending on the input signal format,
the picture is displayed with side
panels and/or bars at the top and
bottom (e.g. VGA input source).
Press QUICK and highlight Picture Size, then press Q to display the list of available widescreen formats.
Use B and b to highlight the required format and press Q to select.
AV format
Picture Size
PC format
Picture Size
PC Normal
Wide
Super Live
PC Wide
Cinema
Dot by Dot
4:3
Subtitle
14:9
Native
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public
display or commercial gain may infringe on copyright laws.
24
00GB_RV-LV685D_Euro.book Page 25 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
Picture Mode
This television offers the choice of personalising the picture
style.
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: features not available will be greyed
out.
AutoView, Dynamic, Standard, Movie, Store, Game and
PC are preset options and affect many features/settings within
the television.
Picture Position
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
a
English
Picture controls
In the SETUP menu press b until Picture Position is
highlighted.
SETUP
Country
Germany
Ant/Cable In
Antenna
NOTE:
• Because the AutoView mode automatically adjusts picture
settings based on ambient light conditions and input signal
content, the Auto Brightness Sensor and Expert Mode
menus are greyed out when it is selected.
• Store mode is only available when Location is set to Store.
• Game mode is available in external input mode (other than
aerial input). When you select Game mode, suitable
widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI input
mode.
a
In the PICTURE menu press b to select Picture Mode.
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
b
c
PICTURE
DTV Settings
Picture Mode
AV Connection
Picture Position
Reset
Press Q to view the options available for the picture
format that has been selected.
Press B and b to select an option, then C or c to
adjust the settings.
b
The options differ depending on the currently selected
widescreen format and the input signal.
In Cinema:
0
Vertical Position
0
Backlight
60
Contrast
95
Brightness
0
Colour
0
Tint
Sharpness
0
0
Press C or c to select the picture mode you prefer and
press Q.
NOTE: The picture mode you select affects the current input
only. You can select a different picture mode for each input.
Picture Position
Horizontal Position
AutoView
Picture preferences
Reset
To return to the original factory settings select Reset in
the Picture Position menu and press Q.
You can customise current picture mode settings as desired. For
example, while selecting "Dynamic," if you change the
following items, such as Backlight, Contrast, Brightness,
Colour, Tint, Sharpness and the Advanced Picture Settings
items, your new settings are saved for "Dynamic" picture mode.
a
In the PICTURE menu press b to select either
Backlight, Contrast, Brightness, Colour, Tint or
Sharpness and press Q.
b
Press C or c to adjust the settings.
25
00GB_RV-LV685D_Euro.book Page 26 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
c
Reset
This feature resets all picture settings to the factory settings
except Picture Mode.
Press C or c to select Hue, Saturation or
Brightness, and then press B or b to adjust the
settings as required.
NOTE: If any picture settings have not been changed, Reset is
not available.
Hue
Saturation
Brightness
0
0
-1
Red
a
In the PICTURE menu press b to select Reset and
press Q.
b
A confirmation message will appear. Press C or c to
select Yes and press Q.
d
Press Q to return to the previous menu.
To return to the factory settings, select Reset and press
Q.
3D Colour Management
Colour Temperature
When 3D Colour Management is set to On it allows the ‘Base
Colour Adjustment’ feature to become available.
Colour Temperature increases the ‘warmth’ or ‘coolness’ of
the picture by increasing the red or blue tint.
a
In the PICTURE menu press b to select Advanced
Picture Settings and press Q.
a
In the Advanced Picture Settings menu press b to
select Colour Temperature and press Q.
b
Press b to select 3D Colour Management.
b
Press C or c to select the Colour Temperature
setting (0 (warm) – 10 (cool)).
Advanced Picture Settings
3D Colour Management
On
Colour Temperature
Base Colour Adjustment
Colour Temperature
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
On
Black/White Level
10
Static Gamma
0
Noise Reduction
c
Green-Offset
0
Blue-Offset
Red-Gain
0
Green-Gain
0
Blue-Gain
0
0
Press C or c to select On or Off, and then press Q.
c
The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
b
0
Reset
Base Colour Adjustment
a
5
Red-Offset
In the Advanced Picture Settings menu press b to
select Base Colour Adjustment, and then press Q.
d
Saturation
0
Brightness
0
Green
0
0
0
Blue
0
0
0
0
0
0
0
0
0
0
0
0
Yellow
Magenta
Cyan
Press Q to return to the previous menu.
To return the Colour Temperature settings to the
factory defaults, select Reset and press Q.
NOTE: If Picture Mode is set to AutoView, you can adjust
Colour Temperature only, and the range will be -5 to +5.
Press B or b to select an option, then press c to move
to the adjustment window.
Base Colour Adjustment
Hue
Red
0
Press B or b to select the option you want to adjust,
and then press C or c to adjust the settings.
Reset
26
00GB_RV-LV685D_Euro.book Page 27 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
English
Auto Brightness Sensor Settings
Black/White Level
When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a
b
In the Advanced Picture Settings menu press b to
select Auto Brightness Sensor Settings and press
Q.
a
In the Advanced Picture Settings menu press b to
select Black/White Level.
b
Press C or c to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
Press C or c to select On and press Q.
Static Gamma
Auto Brightness Sensor Settings
Auto Brightness Sensor
On
The static gamma feature allows you to adjust the levels of black
in the picture.
Backlight Adjustment Pro
c
Press b to select Backlight Adjustment Pro and
press Q.
d
The Backlight Adjustment Pro window will appear.
Press Q again to display the adjustment window.
e
Press C or c to select a point and press B or b to
adjust the level.
In the Advanced Picture Settings menu press b to
select Static Gamma.
b
Press C or c to adjust the level.
MPEG NR – Noise Reduction
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
out the edges.
Backlight Adjustment Pro
Backlight Control Level
a
48
100
a
In the Advanced Picture Settings menu press b to
select Noise Reduction and press Q.
b
Press b to select MPEG NR.
Control
Level
Cancel
Reset
0
Ambient Light
f
Noise Reduction
Press Q to fix the adjustment.
To cancel the adjustment when selecting a point, select
Cancel and press Q.
c
To return the adjustments of all points to the factory
defaults, select Reset and press Q.
MPEG NR
Low
DNR
Auto
Press C or c to select Low, Middle, High or Off to
suit your preference.
DNR – Digital Noise Reduction
DNR allows you to ‘soften’ the screen representation of a weak
signal to reduce the noise effect.
Active Backlight Control
When Active Backlight Control is activated, it will
automatically optimise the backlighting levels for dark scenes.
a
Select DNR from the Noise Reduction menu.
a
In the Advanced Picture Settings menu press b to
select Active Backlight Control.
b
b
Press C or c to select On or Off.
Use C or c to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
27
00GB_RV-LV685D_Euro.book Page 28 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Resolution+
Expert Mode
Red
The Resolution+ feature allows you to adjust the clarity levels
for your desired picture settings.
a
b
In the Advanced Picture Settings menu, press b to
select Resolution+ and press Q.
In the Resolution+ field, select On.
c
Resolution+
Resolution+
Level
c
On
Green
On
Blue
Off
Colour
50
Tint
50
Press b to select Colour or Tint, and then press C or
c to adjust.
On
3
Resetting the advanced picture settings
Press b to highlight Level, then press C or c to adjust
the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu press b to
select Reset.
b
Press Q.
Cinema Mode
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema Mode can help correct this by
smoothing out the picture.
a
In the Advanced Picture Settings menu press b to
select Cinema Mode.
b
Press C or c to select On or Off.
NOTE: When a DVD with subtitles is being played this
mode may not work correctly.
Expert Mode
This feature allows you to turn the colours red, green, and blue
On/Off individually in order to adjust each colour more
accurately.
NOTE: This feature is not available when Picture Mode is set
to AutoView.
a
In the Advanced Picture Settings menu press b to
select Expert Mode and press Q.
b
Press B or b to select either Red, Green or Blue and
press C or c to select On.
Select Off for the other two colours.
28
00GB_RV-LV685D_Euro.book Page 29 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
4:3 Stretch
This feature displays the brightness histogram and control curve
of each scene.
When 4:3 Stretch is activated the size switching system
changes 4:3 programmes into full screen picture.
a
In the PICTURE menu, press b to select Control
Visualization and press Q. The histogram window
will appear.
a
In the PREFERENCES menu press b to highlight 4:3
Stretch.
b
Press C or c to select On or Off.
Control Visualization
Distribution
Blue Screen
When Blue Screen is selected the screen will turn blue and the
sound will be muted on analogue channels and external input
modes when no signal is received.
Number
Of
Pixels
a
In the PREFERENCES menu press b to highlight Blue
Screen.
b
Press C or c to select On or Off.
Brightness
Control Curve
Output
Side panel adjustment
The Side Panel feature lightens or darkens the band on each
side of the screen when in 4:3 or 14:9 format. This helps prevent
image retention of the band and can also make viewing in
bright or dark conditions more comfortable.
Input
b
Press RETURN to return to the previous menu.
Automatic Format (Widescreen)
When this television receives a true Widescreen picture and
Auto format is On, it will automatically be displayed in
Widescreen format irrespective of the television’s previous
setting.
Press MENU and C or c to select the PREFERENCES
menu.
b
Press b to highlight Auto Format, then C or c to
select On or Off.
b
Press C or c to adjust (1-3).
This feature is used to hold a still image on the screen.
Press r to hold an image on the screen, press r
again to cancel.
HDMI Information Display
When the HDMI Information Display feature is On and you
are watching a HDMI input source, pressing the
button
displays the HDMI signal information banner.
PREFERENCES
Auto
Panel Lock
Off
Auto Format
On
4:3 Stretch
Off
Blue Screen
On
Side Panel
1
Off
HDMI Information Display
In the PREFERENCES menu, press b to select Side
Panel.
Picture still
a
Teletext
a
a
In the PREFERENCES menu, press b to select HDMI
Information Display.
b
Press C or c to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate, Aspect, Colour
Depth, Colour Space, RGB/YUV, Chroma Format
29
English
Control Visualization
00GB_RV-LV685D_Euro.book Page 30 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Enjoying Photos through the
USB port
To open Photo Viewer
There are two kinds of methods to open Photo Viewer.
The Photo Viewer allows you to playback JPEG files from a USB
storage device. Entire files can be viewed individually in a
Single View or Slideshow mode, or as thumbnails in a Multi
View overview mode.
Automatically open
a
Photo Viewer specifications
NOTE: If you repeatedly insert and remove the USB
connector, the prompt may not appear.
Data type: JPEG Exif ver2.2
b
File format: DCF ver1.1
Maximum photo size: 9 MB
Maximum number of files: 2000 / Folder
Maximum photo resolution: 16384 5 16384 pixels
No
• Gently insert the USB device into the port and do not
remove while viewing Media Player.
• USB device: USB Mass Storage Class device (MSC)
• Connectivity is not guaranteed for all devices.
• Connect the USB device to the TV directly.
• Do not use a USB hub.
• You must obtain any required permission from
copyright owners to use copyright content. Toshiba
cannot and does not grant such permission.
Manually open
a
Press MENU and C or c to select the APPLICATIONS
menu.
b
Press b to select Media Player, and then press Q.
c
Press b or B to select Photo then press Q.
Media Player
Press MENU and C or c to select the APPLICATIONS
menu.
Press b to select Media Player, and then press Q.
c
Press b or B to select Auto Start.
d
Press C or c to select On or Off.
See the Media Player menu at right.
Yes
NOTE: The prompt will disappear after about 6 sec.
To select the Auto Start function
b
Press C or c to select Yes, then press Q. The Media
Player menu will appear. When you select No,
nothing happens.
USB device was connected to TV. Do you want to open
Media Player?
PLEASE NOTE
a
Gently insert a supported USB storage device to the
USB port on the side of the TV. A prompt will appear.
Photo
Auto Start
d
On
Press b or B to select a device if the selection window
appears, and then press Q. The Photo Viewer will
open.
NOTE:
• The viewer will also open even if there are no photo files.
• While the Media Player is active, the main menus cannot
be displayed.
30
00GB_RV-LV685D_Euro.book Page 31 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
In this view mode, only files located in the selected directory
shall be displayed. This view allows you to change the photo
content manually. When moving from Multi View to Single
View, the currently selected photo shall be displayed.
There are three types of view modes.
Multi View
This view allows you to search for photos in a grid format.
These pictures are displayed using thumbnail data in each
image file.
Photo
a
Press c to view the next photo. Press C to view the
previous photo.
b
Press B to rotate the image 90° clockwise. Press b to
rotate the image 90° counterclockwise.
c
Press
to display file status information (file
number, photo title, date and time taken, resolution
etc.). The information display will time out (after about
6 seconds) or you can close by pressing
again.
/Folder
1/54
E05265464.jpg
OK Select QUICK Features P
Slideshow
Page RETURN Back
The initial highlighted position will be on the top left thumbnail
in the Multi view.
a
Press B b C c to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing C at the top left thumbnail, the screen will
move to the previous page. Conversely, when pressing
c at the bottom right thumbnail, the screen will move
to the next page.
PU Pu buttons can be used to page up/down the
photo list when there are more photos than will fit onto
one screen. When the PU Pu buttons are pressed, the
highlight shall be on the photo at the top left of
Previous/Next list.
b
When you select a folder, press Q to move to next
layer. Press RETURN to move back to previous layer.
c
Press Q to view the selected photo in Single View
mode.
This view allows you to watch a slideshow of the photos. In this
mode, only files located in the selected directory will be played.
a
To start slideshow, press Q in the single view mode.
b
Press C / c to view the previous/next photo content.
c
Press B or b to rotate the photo.
d
Press
to display file status information. The
information display will time out (after about 6
seconds) or you can close by pressing
again.
To set Picture Size, Interval Time and Repeat
settings:
a
Press QUICK to open the Quick Menu.
Quick Menu
Picture Size
Normal
Interval Time
3sec
Repeat
On
b
Press B or b to select either Picture Size, Interval
Time or Repeat.
c
Press C or c to adjust the setting and press Q.
To close the Photo Viewer
a
31
Press EXIT. The television will return to the last viewed
channel or external input.
English
Single View
Viewing photo files
00GB_RV-LV685D_Euro.book Page 32 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Other features
The timers
Panel Lock
Programme Timers – digital only
Panel Lock disables the buttons on the television. All buttons on
the remote control can still be used.
This feature will set the television to go to a specific channel at
a certain time. It can be used to view a particular programme,
or by setting the mode to daily or weekly, can be used to view a
series of programmes.
a
From the PREFERENCES menu select Panel Lock and
choose On or Off using C or c.
a
Press MENU and C or c to select the APPLICATIONS
menu.
PREFERENCES
Teletext
Auto
Panel Lock
Off
Auto Format
On
4:3 Stretch
Off
Blue Screen
On
Side Panel
1
Off
HDMI Information Display
APPLICATIONS
Media Player
Programme Timers
On Timer
Sleep Timer
00:00
When Panel Lock is On, a reminder will appear when the
buttons on the television are pressed. If the standby button
is pressed the television will switch off and can only be
brought out of standby by using the remote control.
b
Press b to select Programme Timers, and then press
Q.
TOSHIBA Illumination (RV series only)
c
Press b if necessary to select an open timer position,
then press Q. The Edit Timer menu will now appear
on screen.
d
Press B and b to go through the list adding the details
of the programme by using the number buttons and C
and c to make selections.
You can set the illumination mode of the TOSHIBA logo located
on the front panel to On or Off.
a
In the PREFERENCES menu, press b to select
TOSHIBA Illumination.
b
Press C or c to select either On or Off.
10:50 Tue, 26 Apr
Edit Timer
Timer Type
Reminder
Channel
30 CABC Channel
Date
Tue, 26 Apr 2009
Start Time
10:49
End Time
11:49
Repeat
Once
Subtitle
0 - 9 Input
e
Off
Edit
OK Save
RETURN Back
When all the details have been entered press Q to
save the timer.
The ORANGE/RED programme timer indicator on the
front of the television will be lit (see page 47 for
details).
PLEASE NOTE: When a timed programme is about to start, an
information screen will appear offering the option of watching
or cancelling the programme. The menus and other channels
will not be available during the timed programme unless the
programme timer is cancelled. The programme timer you set
is not performed when the TV is turned off with the ! POWER
switch.
32
00GB_RV-LV685D_Euro.book Page 33 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
Sleep Timer
This feature allows you to set the television to turn on
automatically to a preset channel at a certain time of day or
after a certain length of time. When On Timer is set to On, the
green On Timer indicator on the front of the television is lit.
The television can be set to turn itself Off after a certain length
of time.
a
In the APPLICATIONS menu, press b to select On
Timer and press Q.
b
Press B or b to select Enable On Timer, and then
press C or c to select On.
On Timer
Enable On Timer
Enable DTV Clock
Repeat
Once
Volume
Time until Power On
b
Press EXIT to finish.
c
To cancel the Sleep Timer, enter all zeros in the
above setting.
On
00:00
Channel
In the APPLICATIONS menu, press b to select Sleep
Timer. Use the number buttons to set the required
time. For example, to switch the television off in one
and a half hours enter 01:30, or press c/C to
increase/decrease in steps of 10 minutes.
On
Power On Time
Input
a
DTV
12 ABC
20
00:00
c
Press b to select Enable DTV Clock, and then press
C or c to select On or Off.
d
Press B or b to go through the list adding the details
of the On Timer by using the number buttons and C
and c to make selections.
Power On Time (only for DTV Clock On mode): Set
the time you prefer with the number buttons.
Repeat (only for DTV Clock On mode): Select the
desired On Timer operation (Once, Everyday, MonFri, Mon-Sat, Sat-Sun).
Input: Select a video input source (ATV, DTV, EXT 1,
EXT 2, EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or
PC).
Channel: Set the channel that will be tuned when the
television turns on.
NOTE: When an external input is selected in the Input
field, a channel cannot be selected.
Volume: Set the volume that will be applied when the
television turns on.
Time until Power On (only for DTV Clock Off mode):
Set the amount of time from now until the TV turns on
using the number buttons (maximum of 12 hours and
50 minutes).
To cancel the On Timer
a
In the On Timer menu, select Enable On Timer
b
Press C or c to select Off.
33
English
On Timer
00GB_RV-LV685D_Euro.book Page 34 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Digital on-screen
information and Programme
Guide
On-screen Information icons
Icon
Description
Service info
Service type
(TV, Radio, TEXT)
Audio info
Mono
Skip
When viewing in digital mode, the on-screen
information and programme guide provide access
to programme details for all available channels.
Stereo
Dual mono
Multichannel
Information
a
D
D+
Press
, the information screen will appear giving
details of the channel and programme currently being
viewed.
Audio/Subtitle info
Event info
Dolby Digital
Dolby Digital+
For Hard of Hearing
HD, SD
Video format (HD, SD)
16:9, 4:3
Video Aspect
Teletext
4
CANAL+
Subtitle (Single, Multi)
10:34 Tue, 26 Apr
Multi-audio track
English
0, 4 – 18
Parental rating
Encrypted
10:00- 10:49
Now City Hospital
SD 16:9
15 min left
News
Next
Timer info
Reminder
10:49- 11:49
Also
b
Press B or b to select the “Now”, “Next” or “Also”
information guide.
c
To record the next scheduled programme, select
"Next" and press Q. The Edit Timer screen will
appear.
Edit Timer
10:50 Tue, 26 Apr
Tue, 26 Apr 11:00
30 CABC Channel
Seven Wonder4
Timer Type
Recording
Start Time
10:49
End Time
11:49
Repeat
Once
Subtitle
50
Edit
d
OK Save
On
RETURN Back
The details of the programme will already have been
added to the timer. Press Q to save.
To indicate that a Recording Timer has been set, a
clock icon will be displayed in the Next and Also fields
of the information screen. A check mark will appear if
the timer is a Reminder Timer.
e
Recording
Press b to select Also. Details of programmes that
have started on other channels will be provided. Use
C or c to change the display contents.
34
00GB_RV-LV685D_Euro.book Page 35 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
a
Genre selection/searching
Select the on-screen guide by pressing GUIDE, the
guide screen will appear highlighting details of the
channel and programme currently being viewed. This
may take a few moments to appear.
10:50 Tue, 6 Apr
Thu6
TV
6 M6
18:00
18:30
19:00
19:30
09 LES SIM... 33 LES SIM...
06 TOP MODEL
09 LES SIMPSON
10 SUMMERLAND 53 SUMMERLAND
9 W9
11 NT1
From the guide screen, you can use the genre selection and
search features.
a
Press the QUICK button from the guide screen.
b
Press b or B to highlight Genre Colour in the Quick
Menu, then press Q.
20:00
Genre Colour Setup
44 LES SIM...
Movies
08 Nicky La... 32 Street fight... 59 Dragon B... 24 Dragon B... 48 K 2000
31 PARIS PREMIERE
34 AB1
06 MA SORCIE...
39 HAPPY DAYS 39 HAPPY DAYS
00 Evamag 27 21 jump street 14 Jerry Springer Show 54 City guys 17 L...
800 FlowerGd 6Mbs
801 FlowerGd 4Mbs
Colour Setup
802 FlowerGd 2Mbs
804 Codec 4:3
806 ITV1
c
With the focus on a particular genre, press the desired
colour key to assign. Four colours will be available to
set. Press RETURN to go back to the guide screen.
d
Press the YELLOW button to access the Genre Search
screen.
807 ITV3
808 ITV2
809 ITV4
You can switch the time scale to 1.25 or 2.5 hours by
pressing the GREEN button.
Genre Search
NOTE: Channels are displayed in groups of service
type (TV, Radio, Text). Pressing the ATV/DTV button
will switch the service type.
b
c
34 AB1
Hard Rain
31 PARIS PREMIERE Red Corner
The Lawnmower Man
11 NT1
Press C or c for information on other programmes
scheduled for the channel selected. To highlight the
first programme in the genre grid, press the RED
button.
9 W9
34 AB1
e
To set a timer for a programme, press the BLUE button
to bring up the Programme Timers menu.
NOTE: In order for the recording operation to work
properly, the media recorder must be set to the same
time as the TV. Regarding the process for recording,
please refer to the owner’s manual of the recording
equipment.
Wed,27 Apr 22:15- 23:55
Thu,28 Apr 1:20- 3:00
Fri,29 Apr 1:30- 3:00
Parenthood
Sat,30 Apr 0:45- 2:40
Sat,30 Apr 1:15- 3:00
Body and Soul
31 PARIS PREMIERE The Nun’s Story
For more information on a highlighted programme,
press
.
Wed,27 Apr 0:15- 1:45
A Vow to Kill
11 NT1
9 W9
Red Corner
11 NT1
The Real Blonde
31 PARIS PREMIERE Critters
For details of other programmes currently available,
press B and b to scroll up and down the channel list.
As channels are selected, details of the programme
currently being broadcast will appear. Press C or c to
view information for future programmes.
Press Pu to advance to the next page, or press PU to
go back to the previous page.
10:50 Tue, 6 Apr
Movies
d
f
RETURN Back
Sat,30 Apr 15:00- 17:30
Sat,30 Apr 23:20- 1:15
Sun,1 May 0:40- 2:00
Sun,1 May 0:40- 2:20
11 NT1
11 NT1
Indiana Jones and the Temple of Doom Sun,1 May 21:10- 23:20
Sun,1 May 23:20- 1:15
The jackal
34 AB
Coup De Ville
Mon,1 May 1:10- 3:00
e
Press C or c to select a genre. Programmes listed will
change for the new genre. Press B or b to highlight a
particular programme.
f
When a current programme is selected, pressing Q
will tune to that programme. When a future
programme is selected, pressing Q will open the Edit
Timer menu.
g
For information on a highlighted programme press
.
h
To exit the Genre Search and go back to the guide
screen, press the YELLOW button.
35
English
Guide
00GB_RV-LV685D_Euro.book Page 36 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Digital settings – parental
control
Parental Setup
In order to prevent viewing of unsuitable films and
programmes, channels and menus can be locked in
digital mode. These can then only be accessed with
a security code PIN.
Setting the PIN
a
Press MENU and c to select the SETUP menu.
b
Use b to select DTV Settings, and then press Q.
The Parental Control feature allows you to block programmes
according to their rating levels. If a PIN has been set, you will
need to enter it before adjusting the level.
a
In the DTV Settings menu press b to select Parental
Control, and then press Q.
b
Use C or c to choose an option (None or an age
setting (4-17)).
Parental Control
Parental Setup
None
To view blocked programmes, enter the PIN. To
reactivate the Parental Control, turn the TV off and
then on again.
SETUP
Menu Language
English
Country
Germany
Ant/Cable In
Antenna
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
c
Press b to highlight PIN Setting, and then press Q.
DTV Settings
Channels
Channel Options
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
11:51
Off
Auto Channel Update
Standard
DVB Character Set
d
Using the number buttons enter a four digit number.
Once entered you will be prompted to confirm by
entering again.
PIN Setting
New PIN:
* * * *
Confirm PIN:
The PIN number is now set.
If the PIN code has been set, when Auto Tuning and
Reset TV are executed, entering the PIN will be
necessary.
36
00GB_RV-LV685D_Euro.book Page 37 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
Digital settings – other
settings
Skipping channels
Subtitles
This feature allows you to set channels that will be skipped when
Pu or PU are used to tune.
In digital mode, this feature will show subtitles on the screen in
the selected language provided they are being broadcast.
a
From the DTV Settings menu press b to select
Channel Options and press Q.
a
In the DTV Settings menu press b to select Subtitle
and Audio and press Q.
b
Press B or b to select a channel position to be
skipped. Press Q to set the ones desired. A tick will
appear in the box.
b
Press b to select Subtitle Type and use C or c to
select Normal or For Hard of Hearing.
Subtitle and Audio
Subtitle Type
Normal
Channel
Primary Subtitle Language
English
1119 ABC ONE
Secondary Subtitle Language
French
Audio Type
Normal
Primary Audio Language
English
Secondary Audio Language
French
Channel Options
c
TV
Press EXIT.
NOTE: Skipped channels cannot be selected by Pu or
PU but can still be accessed by direct number entry
(when tuned a 8 icon will be displayed in the banner
to indicate as a skipped channel).
Locking channels
Locking Channels stops the viewing of digital channels. They
can only be accessed by entering the PIN.
a
c
The SUBTITLE button can be used to select subtitle ON or
OFF, and to select subtitle language if more than one subtitle
is available.
From the DTV Settings menu, press b to select
Channel Options and press Q.
Audio languages
This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided multiple language
tracks are being broadcast.
b
Press c to select the Locked Channel list.
c
Press B or b to select a channel position to be locked.
Press Q to set the lock. A tick will appear in the box.
If a PIN has already been set, PIN entry will be
required to set the locked channels.
Press b to select Primary Subtitle Language or
Secondary Subtitle Language and use C or c to
select an option.
a
In the Subtitle and Audio menu press b to select
Audio Type and use C or c to select Normal or For
Hard of Hearing.
b
d
Press EXIT.
Press b to select Primary Audio Language or
Secondary Audio Language and use C or c to
select an option.
e
From this point on, when any of the channels in the
Locked Channel list are tuned, the PIN must be
entered before they can be accessed.
If more than one soundtrack is available, use the s
button to select between them.
37
English
Digital settings – Channel
Options
00GB_RV-LV685D_Euro.book Page 38 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional Access
Module) and card. These are purchased from a service provider
and allow additional subscription broadcasts to be viewed. For
information, see a service provider.
a
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM
has been inserted.
b
In the DTV Settings menu press B or b to select
Common Interface and press Q.
c
Details of the CAM should now be available.
Software Upgrade and
Licenses
Auto Upgrade
When Auto Upgrade is set to On (default setting), the
television will automatically upgrade while in standby if new
software is available.
a
From the SETUP menu press B or b to select
Software Upgrade and press Q.
b
Press b to select Auto Upgrade.
c
Use C or c to select On or Off.
Searching for New Software
If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the Software Upgrade menu press B or b to
select Search for New Software.
b
Press Q. The television will automatically start
searching for a software upgrade, the progress bar will
move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found, the television will automatically
start downloading. If not, a screen will appear stating
that an upgrade is unavailable.
Software Licenses
The licenses for the software used in this television are available
for viewing.
a
In the SETUP menu, press B or b to select Software
Licences and press Q.
A screen will appear displaying all the licensing
information required for the television's software.
38
00GB_RV-LV685D_Euro.book Page 39 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
English
System Information and
Reset TV
PC Settings
Horizontal and Vertical Position
System Information
Connect the PC (as shown in the ‘Connecting a PC’ section) and
ensure that a picture is showing on the television screen. The
picture position may now be adjusted to suit personal
preference.
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
a
From the SETUP menu press B or b to select System
Information.
b
Press Q to display the System Information.
SETUP
System Information
TOSHIBA
2009
2.1.26.0 Feb 19 2009 - 15:56:50 FW:13
WEAK
AVERAGE
Country
Germany
Ant/Cable In
Antenna
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
STRONG
Ch22
Ch25
Ch35
Ch46
Press o to select PC, then select PC Settings from the
SETUP menu.
DTV Settings
Poor
Good
Good
Good
AV Connection
PC Settings
b
c
For information about the signal quality of a particular
multiplex, press B or b to select that multiplex.
d
Press Q for a screen showing detailed technical
information about the selected multiplex.
Press Q. Press B and b to select an option, then C
or c to adjust the settings.
PC Settings
b
Use C or c to select On.
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
In the SETUP menu press b until Reset TV is
highlighted.
b
Press Q to select. A screen will appear warning that
all settings will be lost. Press Q to continue.
0
0
Clock Phase
The Clock Phase matches the PC signal with the LCD display.
Adjusting this can clear horizontal stripes and picture blur.
Reset TV
a
0
Clock Phase
Reset
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not touch the control buttons
on the remote control or on the TV control panel.
In the SETUP menu, press b until Automatic Power
Down is highlighted.
0
Vertical Position
Sampling Clock
Automatic Power Down
a
Horizontal Position
a
In the SETUP menu press b until PC Settings is
highlighted.
b
Press Q to select, then b to highlight Clock Phase.
c
Use C or c to adjust until the picture clears.
When the set powers back on, the Quick Setup screen
will appear. Press Q to advance the setup and
perform an auto tune. (See ‘Quick Setup’ section on
page 13.)
39
00GB_RV-LV685D_Euro.book Page 40 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
Sampling Clock
Adjusting the Sampling Clock alters the number of pulses per
scan, this will clear vertical lines on the screen.
Input selection and AV
connections
See page 9 for a detailed image showing
recommended connections.
a
In the SETUP menu press b until PC Settings is
highlighted.
b
Press Q to select, then b to highlight Sampling
Clock.
c
Use C or c to adjust until the picture clears.
This button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (EXT 3C).
Reset
An S in the display e.g.o2S (EXT 2S), indicates the input is set
for an S-Video signal.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button o
until the picture from connected equipment is shown.
Use Reset to return all items to the original factory settings.
a
Input selection
In the SETUP menu press b until PC Settings is
highlighted.
b
Press Q to select, then b to highlight Reset.
c
Press Q.
Use the Input Selection window if the television does not switch
over automatically.
a
By pressing o on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
Pressing o on the
remote control
NOTE: When a PC is connected using HDMI none of these
functions will be available.
The screen is disrupted momentarily when adjusting PC
Settings. This is not a sign of malfunction.
The default settings and adjustment ranges may vary
depending on the input signal format.
Pressing o on the TV
right side panel
Inputs
Inputs
TV
DTV TV
1
DTV RADIO *
2
DTV TEXT *
1
3C
2
HDMI 1
3C
HDMI 2
HDMI 3
HDMI 1
HDMI 4
HDMI 2
PC
HDMI 3
* HDMI 4 is model
dependant
HDMI 4
PC
ATV
* If radio or text channels
are currently available
for DTV.
HDMI™ displays equipment connected to Input HDMI
on the back or side of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
External input skip
This feature is designed to make input selection more
convenient.
a
40
Press o to select the external input to be skipped (e.g.
HDMI 1).
00GB_RV-LV685D_Euro.book Page 41 Tuesday, September 1, 2009 10:15 AM
CONTROLS AND FEATURES
In the SETUP menu press b to select Manual
Settings and press Q.
c
Press B or b to turn Skip on and press Q.
HDMI 1 Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 1 (AUDIO) on the back of
the television (as shown in the ‘Connecting an HDMI™ or DVI
device to the HDMI input’ section), then use the HDMI 1 Audio
setting.
Manual Settings
Skip: On
HDMI 1
d
English
b
Press Q to save.
a
In the AV Connection menu press b to highlight PC/
HDMI 1 Audio and using c select HDMI 1.
b
Then highlight HDMI 1 Audio and using C or c select
Auto or Analogue.
The input set to Skip is greyed out in the Input
Selection window and is skipped over when you press
o on the remote control.
AV Connection
PC/HDMI 1 Audio
HDMI 1 Audio
Input signal selection
HDMI 1
Auto
HDMI Settings
EXT 2 Input
This specifies the type of signal going into SCART 2 (EXT 2) on
the back of the television. Please refer to the manufacturer’s
instructions for the connected equipment.
a
In the SETUP menu press b until AV Connection is
highlighted, then press Q.
b
With C or c select either AV or S-VIDEO as the
required input for EXT 2.
AV
Digital Audio Output
Auto
If the sound is absent, try selecting a different setting.
NOTE: HDMI 1 supports digital and analogue sound,
HDMI 2, HDMI 3 and HDMI 4 are digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
HDMI Settings
AV Connection
PC/HDMI 1 Audio
HDMI 1 Audio
PC
Some early HDMI equipment may not work properly with your
HDMI TV. Please try setting the Lip Sync and INSTAPORT™
options to Off. Adjusting these settings should allow your early
HDMI source to operate properly with your television.
Digital
HDMI Settings
EXT 2 Input
AV
Digital Audio Output
Auto
If video colour is absent, try the other setting.
PC Audio
a
In the SETUP menu press b until AV Connection is
highlighted, then press Q.
b
Press b to highlight HDMI Settings and press Q.
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the
‘Connecting a computer’ section), and then use the PC/HDMI 1
Audio setting.
a
In the SETUP menu, press b until AV Connection is
highlighted, and then press Q.
b
Highlight PC/HDMI 1 Audio, and then use c to select
the PC option.
NOTE: HDMI Settings is grayed out on non-HDMI
inputs.
NOTE: Selecting the PC option will force HDMI 1
Audio to Digital mode.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing,
LLC.
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon
Image, Inc. in the United States and other countries.
41
00GB_RV-LV685D_Euro.book Page 42 Tuesday, September 1, 2009 10:15 AM
English
CONTROLS AND FEATURES
c
Press B or b to select an item, and then press C or c
to select a setting.
HDMI Settings
Lip Sync
INSTAPORT TM
RGB Range
On
On
Auto
• Lip Sync: On
This option activates an audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
• INSTAPORT™: On
This feature reduces the lag time when switching HDMI
sources.
• RGB Range: Auto
This feature adjusts RGB full range signal automatically.
When Limit is selected, RGB signal is output in the range
from 16 to 235. When Full is selected, RGB signal is output
in the range from 0 to 255.
NOTE:
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz or
supports Deep Colour, you will need a Category 2 cable.
Conventional HDMI/DVI cables may not work properly with
this mode.
• All of the above HDMI settings need proper HDMI source
devices.
If the HDMI source products do not support these features,
the television may not work properly by activating these
features.
Digital Audio Output
When connecting a surround sound amplifier to the digital
audio output (Sony/Philips Digital Interface Format
[S/PDIF]), the following options can be selected.
PCM: this mode outputs PCM format to the digital audio output
socket.
Auto: this mode outputs Dolby Digital (if available) or PCM to
the digital audio output socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital
a
In the AV Connection menu press b to select Digital
Audio Output.
b
Use C or c to select PCM or Auto.
42
00GB_RV-LV685D_Euro.book Page 43 Tuesday, September 1, 2009 10:15 AM
TEXT SERVICES
Navigating pages using Auto
This television has a multi-page text memory, which
takes a few moments to load. It offers two Modes
of viewing text – Auto will display Fastext, if
available. LIST will save your four favourite pages.
If Fastext is available four coloured titles will appear at the
base of the screen.
To access one of the four given subjects, press the relevant
coloured button on the remote control.
For further information on your particular text system(s), see
the broadcast text index page or, consult your local Toshiba
dealer.
Selecting modes
The text character set will be automatically chosen by the
language setting in the SETUP menu.
a
Select Teletext from the PREFERENCES menu.
b
With C or c choose Auto or LIST then press EXIT.
Navigating pages using LIST
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.
To change these saved pages, press the relevant coloured
button and enter the 3 digit number. This number will change
in the top left of the screen and in the coloured highlight.
PREFERENCES
Teletext
Auto
Panel Lock
Off
Auto Format
On
4:3 Stretch
Off
Blue Screen
On
Side Panel
1
Off
HDMI Information Display
Press Q to save. Whenever Q is pressed, all four page
numbers showing at the bottom will be saved and the
previous ones will be lost.
If Q is not pressed, the selection will be forgotten when the
channel is changed.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press Q or these pages will be saved.
Text information
The TEXT button:
To view text services press TEXT. Press again to superimpose
the text over a normal broadcast picture and again to return to
normal viewing. Channels cannot be changed until text is
cancelled.
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3 digit page
number using the numbered buttons, pressing the coloured
buttons or pressing PU to advance to the next page and Pu to
go back to the previous page.
Sub-pages
The pages on the screen will dynamically update as sub-pages
are received.
If you open a page containing sub-pages, the sub-pages are
automatically displayed in sequence. To quit automatic subpage change, press C or c.
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating that
these pages have been loaded.
These sub-pages will remain available to view until another
page is chosen or, in normal TV mode, the channel is changed.
43
English
Text services
00GB_RV-LV685D_Euro.book Page 44 Tuesday, September 1, 2009 10:15 AM
English
TEXT SERVICES
Control buttons
Below is a guide to the functions of the remote control text
buttons.
k To display the index/initial page:
Press k to access the index/initial page. The one displayed is
dependant on the broadcaster.
TEXT To display a page of text:
Press TEXT to display text. Press again to superimpose text over
a normal picture. Press again to return to normal television
viewing. Channels cannot be changed until this has been
done.
A To reveal concealed text:
To discover the solutions on quiz and joke pages press the A
button.
B To hold a wanted page:
At times it is convenient to hold a page of text. Press B and
B will appear in the top left of the screen. The page will be
held on screen until the button is pressed again.
C To enlarge the text display size:
Press C once to enlarge the top half of the page, press again
to enlarge the bottom half of the page. Press again to revert to
normal size.
D To select a page whilst viewing normal
picture:
Enter the page number then press D, normal picture will
be displayed. The television will indicate when the page is
ready by changing the colour of the page number at the top of
the screen. Press TEXT to view the page.
To display news flashes:
Select the news flash page for the chosen text service (see the
index page of text service). The news flashes will be displayed
as and when they are broadcast.
Remember to cancel text before
changing channels - press the TEXT
button twice.
44
00GB_RV-LV685D_Euro.book Page 45 Tuesday, September 1, 2009 10:15 AM
PROBLEM SOLVING
Q
A
What else can cause a poor picture?
a
Select the ATV Manual Tuning menu. Highlight the
station and press Q, then press c to select Manual
Fine Tuning.
b
Using B or b adjust to get the best picture and sound.
Press Q and then EXIT.
Below are the answers to some of the most
common queries.
For more information go to www.toshiba.co.uk
Q
A
Q
A
Why is there no sound or picture?
Check the television is not in standby mode. Check the
mains plug and all mains connections.
There is a picture, but why is there little or no
colour?
ATV Manual Tuning
Manual Fine Tuning: 0
When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to Auto to automatically display
the best colour system.
1
To check that you have the best colour:
a
With the external source playing, select Manual
Settings from the SETUP menu.
Manual Settings
Colour System: Auto
EXT 2
A
b
With B or b choose between Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
Q
A
Why doesn’t the video/DVD being played show on
screen?
Q
A
Q
A
Interference or a weak signal. Try a different television
station. Manual Fine Tuning may help.
Make sure the VCR or DVD player is connected to the
television as shown on page 9, and then select the
correct input by pressing o.
Why is there a picture but no sound?
Check all lead connections.
No sound or unacceptable format sound may be
received.
Check the volume has not been turned down or that
sound mute has not been selected.
Why is the VCR/DVD picture in black and white?
Check that the correct setting has been chosen for
EXT 2 Input, S-VIDEO or AV. See AV Connection on
page 41.
45
I
A
C
9
0
Q
A
Q
A
Why don’t the controls of the television work?
Q
A
Q
A
Q
A
Q
A
What is DVB-T?
Check that Panel Lock is not On.
Why doesn’t the remote control work?
Check that the mode switch on the remote control is
in TV mode.
Check that the batteries aren’t dead or inserted
incorrectly.
Digital Video Broadcast via an aerial/antenna.
What is DVB-C?
Digital Video Broadcast via a cable connection.
How are radio channels selected?
Press ATV/DTV on the remote control and select DTV
RADIO. Alternatively select from the GUIDE.
Why is the digital channel locked?
The channel has been selected in Locked Channels
(see 'Digital Settings' section).
English
Questions and Answers
00GB_RV-LV685D_Euro.book Page 46 Tuesday, September 1, 2009 10:15 AM
English
PROBLEM SOLVING
Q
A
Q
A
Q
A
Q
A
Q
A
Q
A
Why is a page number visible at the top of the screen
but no text?
a
Set the Colour to Auto and exit.
b
Go to the PICTURE menu and adjust the tint.
Q
A
Why don't the devices connected via HDMI operate
properly?
Why are some of the digital subscription channels
unavailable?
Your subscription needs upgrading. Contact your
service provider.
Why is the soundtrack in English when a different
audio language has been selected?
The programme is currently being broadcast with an
English soundtrack only.
Why is there incorrect or no sound when in DTV
mode?
Press s to ensure the hard of hearing option has
not been selected.
What can be done if the PIN number has been
forgotten?
Use the Master PIN code of 1276, then change to a
number of your choice. Ensure that no-one else can
use the Master PIN by removing the Owner’s Manual.
Q
A
Why are there vertical stripes on the screen when in
PC mode?
Q
A
Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?
Q
A
Q
A
Why when digital subtitles have been selected are
they not showing on screen?
The Sampling Clock may need adjustment. Select PC
Settings from the SETUP menu, highlight Sampling
Clock and adjust until the lines clear.
The Clock Phase may need adjustment. Select PC
Settings from the SETUP menu, highlight Clock
Phase and adjust until the picture clears.
Subtitles are not currently being transmitted by the
broadcaster.
Why are there problems with analogue text?
Good performance of text depends on a strong
broadcast signal. This normally requires a roof or loft
aerial. If the text is unreadable or garbled, check the
aerial. Go to the main index page of the text service
and look for the User Guide. This will explain the basic
operation of text in some detail. If further information
is needed on how to use text see the text section.
46
Text has been selected but Teletext information is
currently unavailable on the current source.
Why are the colours wrong when an NTSC source is
played?
Connect the source via a SCART lead and play.
Select Manual Settings from the SETUP menu.
Make sure to use cables with the HDMI logo
(see page 10).
Some early HDMI equipment may not work properly
with the latest HDMI TV products, due to new standard
adoption. Try the HDMI settings Lip Sync,
INSTAPORT™ to Off.
00GB_RV-LV685D_Euro.book Page 47 Tuesday, September 1, 2009 10:15 AM
PROBLEM SOLVING
English
Q
A
Why are the LEDs on the front of the television
indicate?
Check the table below.
LED-3
LED-2
LED-1
LED indication
LED-3
LED-2
LED-1
Orange
(Solid)
Green
(Solid)
Green
(Solid)
LED indication
Condition
Solution
Power ON
On Timer is set
Programme Timer is
set
–
Red
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer is
active
–
OFF
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer is
NOT set
–
Orange
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
set
–
Red
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
active
–
OFF
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer is
NOT set
–
Orange
(Solid)
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Programme Timer is
set
–
Red
(Solid)
Green
(Solid)
Red
(Solid)
Power ON (Standby)
On Timer is set
Programme Timer is
active
–
OFF
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Programme Timer is
NOT set
–
Orange
(Solid)
OFF
Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Programme Timer is
set
–
Red
(Solid)
OFF
Red
(Solid)
Power ON (Standby)
On Timer is NOT set
Programme Timer is
active
–
OFF
OFF
Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Programme Timer is
NOT set
–
47
Condition
Solution
Green
(Blinks)
Abnormal operation
of BUS line.
OFF
Red
(Blinks)
Power protect
detection.
OFF
Orange
(Blinks)
Back Light error.
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn
ON the TV.
LED-3
LED-2
LED-1
OFF
OFF
OFF
OFF
00GB_RV-LV685D_Euro.book Page 48 Tuesday, September 1, 2009 10:15 AM
English
INFORMATION
License Information
(for RV685/RV675 and LV685/LV675 series)
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND
NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C.
SEE HTTP//WWW.MPEGLA.COM
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary
polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately
from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury
(Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.
48
00GB_RV-LV685D_Euro.book Page 49 Tuesday, September 1, 2009 10:15 AM
INFORMATION
49
English
For your own records
00GB_RV-LV685D_Euro.book Page 50 Tuesday, September 1, 2009 10:15 AM
English
INFORMATION
Information
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
Pin No.
Signal name
Pin No.
Signal name
Pin No.
Signal name
1
R
6
Ground
11
NC
2
3
G
B
7
8
Ground
Ground
12
13
NC
H-sync
4
5
NC*
NC
9
10
NC
Ground
14
15
V-sync
NC
* NC = not connected
Acceptable PC signals through the PC terminal
The PC input on this TV only accepts the signal formats which are compliant with VESA-DMT as shown in
the table below. Since some PCs input signals which are different from the resolution and frequency
described in the table below, the following phenomenon may occur; incorrect display, false format
detection, picture position failure, blur, or judder. In this case, set the monitor output format on your PC to
conform to a signal in the table below.
Format
Resolution
V. Frequency
H. Frequency
Pixel Clock Frequency
VGA
640 × 480
59.940Hz
31.469kHz
25.175MHz
72.809Hz
75.000Hz
37.861kHz
37.500kHz
31.500MHz
31.500MHz
56.250Hz
60.317Hz
35.156kHz
37.879kHz
36.000MHz
40.000MHz
72.188Hz
48.077kHz
50.000MHz
75.000Hz
46.875kHz
49.500MHz
60.004Hz
70.069Hz
48.363kHz
56.476kHz
65.000MHz
75.000MHz
75.029Hz
59.995Hz
60.023kHz
47.396kHz
78.750MHz
68.250MHz
59.870Hz
74.893Hz
47.776kHz
60.289kHz
79.500MHz
102.250MHz
60.015Hz
60.020Hz
47.712kHz
63.981kHz
85.500MHz
108.000MHz
75.025Hz
79.976kHz
135.000MHz
SVGA
800 × 600
XGA
1024 × 768
WXGA
1280 × 768
SXGA
1360 × 768
1280 × 1024
50
VESA Standard (DMT)
00GB_RV-LV685D_Euro.book Page 51 Tuesday, September 1, 2009 10:15 AM
INFORMATION
English
Acceptable video or PC signals through the HDMI terminals
The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are
compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals
which are different from the resolution and frequency described in the table below, the following
phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
In this case, set the monitor output format on your PC, HDMI or DVI device to conform to a signal in the
table below.
Format
480i
Resolution
720 × 480i
V. Frequency
59.940/60.000Hz
H. Frequency
15.734/15.750kHz
Pixel Clock Frequency
27.000/27.027MHz
576i
480p
720 × 576i
720 × 480p
50.000Hz
59.940/60.000Hz
15.625kHz
31.469/31.500kHz
27.000MHz
27.000/27.027MHz
576p
1080i
720 × 576p
1920 × 1080i
50.000Hz
59.940/60.000Hz
31.250kHz
33.716/33.750kHz
27.000MHz
74.176/74.250MHz
1080i
720p
1920 × 1080i
1280 × 720p
50.000Hz
59.940/60.000Hz
28.125kHz
44.955/45.000kHz
74.250MHz
74.176/74.250MHz
720p
1080p
1280 × 720p
1920 × 1080p
50.000Hz
59.940/60.000Hz
37.500kHz
67.500kHz
74.250MHz
148.500MHz
1080p
1920 × 1080p
50.000Hz
56.250kHz
148.500MHz
1080p
VGA
1920 × 1080p
640 × 480
24.000Hz
59.940Hz
27.000kHz
31.469kHz
74.250MHz
25.175MHz
72.809Hz
75.000Hz
37.861kHz
37.500kHz
31.500MHz
31.500MHz
56.250Hz
60.317Hz
35.156kHz
37.879kHz
36.000MHz
40.000MHz
72.188Hz
75.000Hz
48.077kHz
46.875kHz
50.000MHz
49.500MHz
60.004Hz
70.069Hz
48.363kHz
56.476kHz
65.000MHz
75.000MHz
75.029Hz
59.995Hz
60.023kHz
47.396kHz
78.750MHz
68.250MHz
59.870Hz
74.893Hz
47.776kHz
60.289kHz
79.500MHz
102.250MHz
60.015Hz
60.020Hz
47.712kHz
63.981kHz
85.500MHz
108.000MHz
75.025Hz
79.976kHz
135.000MHz
SVGA
800 × 600
XGA
1024 × 768
WXGA
1280 × 768
SXGA
1360 × 768
1280 × 1024
51
VESA Standard
00GB07Info.fm Page 52 Wednesday, September 2, 2009 10:23 AM
English
INFORMATION
Specifications and
accessories
DVB-T Broadcast systems/channels
UK
UHF 21-68
France
Stereo
Visible Screen Size Model 32
(approx.)
37
40
42
Broadcast systems/channels
PAL-I
UHF UK21-UK69
VHF 05-10 (VHF 01-05) PAL-B/G
UHF 21-69
UHF E21-E69
VHF E2-E12, S1-S41
Germany
VHF 05-12
UHF 21-69
SECAM-L
Austria
VHF 05-12
UHF 21-69
SECAM-D/K UHF R21-R69
VHF R1-R12
Nicam
2 carrier system
UHF F21-F69
VHF F1-F10, B-Q
80cm
94cm
102cm
107cm
Display
16:9
Sound output
(at 10% distortion)
Main 10W + 10W
Switzerland VHF 05-12
UHF 21-69
Power consumption Model 32 LV
(approx.)
40 LV
32 RV
37 RV
42 RV
91 W
183 W
91 W
119 W
136 W
Italy
VHF 05-12 (D,E,F,G,H,H1,H2)
UHF 21-69
Standby
Spain
UHF 21-69
Model 32 LV
40 LV
32 RV
37 RV
42 RV
0.3 W
0.3 W
0.3 W
0.3 W
0.3 W
Dimensions
(approx.)
Model 32 LV 57cm (H) 79cm (W) 29cm (D)
40 LV 66cm (H) 98cm (W) 35cm (D)
32 RV 58cm (H) 79cm (W) 29cm (D)
37 RV 65cm (H) 90cm (W) 29cm (D)
42 RV 71cm (H) 101cm (W) 33cm (D)
(Height dimension includes foot stand)
Weight (approx.)
Model 32 LV
40 LV
32 RV
37 RV
42 RV
Nederlands VHF 05-12
UHF 21-69
Greece
VHF 05-12
UHF 21-69
Video Input PAL, SECAM, NTSC 3.58/4.43
External connections
EXT 1
Input/Output
21-pin SCART
RGB, A/V
(AV out: TV out)
EXT 2
Input/Output
21-pin SCART
A/V, S-video
(AV out: TV out)
EXT 3
Input
Phono jacks
Phono jacks
Y, PB/CB, PR/CR
Audio L + R
EXT 3
Input (Side)
Phono jack
Phono jacks
Video, S-video
Audio L + R
HDMI 1/2/3
Input
HDMI™ (Audio LIP SYNC, INSTAPORT™,
RGB Range supported)
HDMI 4
Input (Side)
HDMI™ (Audio LIP SYNC, INSTAPORT™,
RGB Range supported)
PC
Input
Mini D-sub 15-pin Analogue RGB signal
PC/HDMI 1 Audio
3.5mm mini jack
13.5kg
19.0kg
15.0kg
17.5kg
24.0kg
Headphone socket
3.5mm stereo
Operating condition
Temperature 5°C - 35°C (41°F - 94°F)
Humidity 20% - 80% (non-condensing)
Accessories
Remote control
2 batteries (AAA, IEC R03 1.5V)
Clip
Cleaning cloth (to clean the cabinet and
control panel)
Audio
DVB is a registered trademark of the DVB Project
Digital Audio Output (S/PDIF) Optical
USB port
USB class: Mass Storage
File system: FAT12/16/32
© Toshiba Information Systems (U.K.) Limited
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
Toshiba Information Systems (UK) Limited
Consumer Products Division,
Toshiba Court, Weybridge Business Park,
Addlestone Road, Weybridge,
Surrey, KT15 2UL, England
Specification is subject to change without notice.
52