DecaLED® Touch Panel DMX 4 Manual

DecaLED® Touch Panel DMX 4
95760822
Manual
Description
Thank you for purchasing our digital product DecaLED® Touch Panel DMX 4. You now hold a premiere LED
controller with DMX 512/PWM output. Its compact and portable design is convenient to mount and easy to
operate for users.
Package contents
sical Dimensions
1 x DecaLED® Touch Panel DMX 4
1 x Manual
Carefully unpack the carton. Check the contents to ensure that all parts are present and have been received
in good condition. If any parts appear damaged or missing, notify the shipper immediately and retain packing
material for inspection. In the event that the fixture must be returned to the factory, it is important that the
fixture is returned in the original factory box and packaging.
version
86
Safety Instruction
• Unplug mains before installing or wiring the fixture
• Never look directly into the light source
86
User must be qualified to be involved with installation and maintenance of this product.
User must follow the safety instructions and warning notes written in this manual.
Features
• Touch interface
• DMX 512/PWM output
DecaLED® Touch Panel DMX 4 uses RGB three channels, 2A per channel, 6A in total.
Red is controlled by channel 1, 4, 7...
Green is controlled by channel 2, 5, 8...
Blue is controlled by channel 3, 6, 9...
• LED indicator to display the current output
• Four function menus
• Assign 4 color settings to shortcuts
• Assign 4 selections of adjustable (speed and brightness) color loops
• Set fadetime for Power on/off and color exchange in the range of 0 to 4s
www.decaled.com
• Assign
key tone ON/OFF
• Select input voltage in DC12-24V according to the output loading voltage
• Function memory and power failure protect
version
Physical dimensions
Touch Panel
86mm DMX 4
Color
Program
Brightness
86mm
Speed
1
2
3
4
DecaLED Touch Panel DMX 4 - Product code: 95760822
Product Code:95760822
15.5mm
Control and functions
Control Panel and Functions
Operatio
Front Panel View
1
6. SCENE
6.1 Reco
Up to 4 sc
correspon
Color
2
Program
Brightness
3
7
6
5
4
Speed
a. Touch
indicat
b. Rotate
c. Touch
on for m
1
3
2
4
DecaLED Touch Panel DMX 4 - Product code: 95760822
Fig 1
8
d. All indi
(includ
been re
e. Repea
Touch Panel DMX 4 (EU)
1. Power key
Used to power on/off DecaLED® Touch Panel DMX 4.
1. Power key
2. Color key
Used to power on/off Touch Panel DMX 4.
Used to select color.
2. C key (color)
3. Program key Used to select color.
Used to select Built-in program.
6.2 Playb
Touch "P"
of 1~4 to r
up and it s
6.3 SCEN
To lock sc
about 10
keys1~4 c
3. P key (program)
Used to select Built-in program.
4. Speed key
Used to adjust
4.speed.
S key (speed)
Used to adjust speed.
To unlock
seconds u
Used to adjust brightness.
* NOTE:
Each figur
5. Brightness key
5.brightness.
B key (brightness)
Used to adjust
6. Output Indicator
6. Output Indicator
Used to displayUsed
the current
output.
to display
the current output.
7. Touch toggle7. Touch toggle
Used to
adjust color,
brightness
and speed,
select
built-in programs.
Used to adjust color,
brightness
and
speed, and
select and
built-in
programs.
8. Figure keys (1~4)
8. Figure keys (1~4)
Used to record scene and color, as well as set fadetime.
Used to record scene and color, as well as set fadetime.
Rear Panel View
Page 2
Touch Panel DMX 4 User Instruction
The DecaLED® Touch Panel DMX 4 features one group DMX OUT with 4-pin terminal connector and one group
POWER IN & PWM OUT with 6-pin terminal connector. Also a LINK IN and LINK OUT is available.
The configuration of the terminal is as the following:
1.
2.
3.
4.
1
2
3
4
LINK IN: 4-pin terminal (black)
DMX OUT: 4-pin terminal (orange)
PWM OUT & POWER IN: 6-pin terminal (green)
LINK OUT: 4-pin terminal (green)
Operation guide
1. ON/OFF
DecaLED® Touch Panel DMX 4 can be connected to a DC power at any voltage from 12V to 24V. When the
indicator of POWER button lights up, the unit powers on and resumes the output setting of last time.
In normal mode, to touch POWER key and hold on for 2s, DecaLED® Touch Panel DMX 4 switches to the state
of standby. At this time, the output is shut down. Touch the power key once again and hold on for 2s, the unit
is powered on.
Setting Shortcut for Power ON/OFF
If this shortcut is not set, you will need to touch and hold the ON/OFF button for 2 seconds to turn the controller
on or off. If the shortcut is set, the DecaLED® Touch Panel DMX 4 will respond immediately with a single touch
of the ON/OFF button.
• Touch “Program” key and “Power” key simultaneously and hold on for about 10 seconds until all keys flash
momentarily once.
• Touch “Power” key once, DecaLED® Touch Panel DMX 4 changes to standby condition. Directly touch any
key on the panel, DecaLED® Touch Panel DMX 4 starts up.
• To delete power shortcut, touch “Program” key and “Power” key simultaneously and hold on for about 10
seconds until all keys flash once.
Setting Fadetime for Power ON/OFF
• To set power on/off fadetime, follow the procedures below:
• Touch “Power” key and hold on for 5 seconds till all LED indicators flash once. Then release the Power key
and the key flashes repeatedly.
• Touch any one of these keys--1, 2, 3, 4, Program, Color, Brightness or Speed.
• All indicators flash momentarily once to confirm the setting.
• The existing mode ends and changes to normal mode automatically.
Different keys represent different fadetime:
Keys
1
2
3
4
P/C/B/S
Fadetime
1s
2s
3s
4s
0s (no fade)
2. Built-in Program
Hold on pressing “Program” key for about 1s to enable built-in Program Menu, the key clicks and the indicator
is lit. Then rotate the touch toggle to select a desired built-in program. There are 10 built-in programs plus an
Auto Program for user selection (“Auto Program” is the sequential running of these 10 built-in programs).
The process of selecting the built-in programs produces clicks and each click will activate one program.
3. Brightness
To enable Brightness Menu, hold on pressing “Brightness” key for about 1s, the key clicks and the indicator lights
up. Then rotate the touch toggle to adjust the brightness as you wish. In clockwise, the brightness increases; In
anti-clockwise, the brightness decreases.
NOTE: The value of brightness can be adjusted in the range of 0 to 255.
4. Speed
To enable Speed Menu, hold on pressing the “Speed” key for about 1s, the key clicks and the indicator lights
up. Then rotate the touch toggle to adjust the speed of running built-in programs in the range of 0.2s~10min.
In clockwise, the speed will increase;In anti-clockwise, the speed will decrease.
When you rotate the toggle to reach 10min, the click disappears and all the four figure keys flash repeatedly.
Then you select the speed which you wish by pressing any of the figure keys. Different figure keys stand for
different speed -- “1” for 10min, “2” for 20min, “3” for 30min and “4” for 40min.
NOTE: In the process of adjusting brightness and speed, the toggle produces clicks. However, the click
disappears when the toggle reaches the maximum/minimum value.
5. Color
To enable Color Menu, hold on pressing the “Color” key for about 1s, the key clicks and the indicator lights up.
Then rotate the touch toggle to adjust the RGB value until you get the desired color.
5.1 Setting a color
Up to 4 colors can be configured and stored into the memory of the device in manual mode. Each figure key
corresponds to one color. The procedure to assign a color is described below:
•
•
•
•
Touch “Color” key to enable Manual Mode, the key clicks and the indicator is lit.
Rotate the touch toggle to adjust RGB value until you get desired color.
Touch any of the figure keys to which you wish to record the color, and hold on for more than 2 seconds.
All indicators flash momentarily once to indicate the current parameters, including the value of color and
brightness, have been saved into the key.
• Repeat these step to save a color to the other 3 figure keys.
5.2 Playback color
Touch “Color” key to enable Manual Mode. Then touch the corresponding button of 1~4 to select the color
which you have assigned to the key. The LED indicator lights up and it starts to display the stored color.
5.3 Setting Fadetime for Color Exchange
To set the fadetime for color exchange, you take the following procedures:
• Touch “Color” key and hold on for 5 seconds till all LED indicators flash once. Then release the key and the
“Color” key flashes repeatedly.
• Touch any one of these keys--1, 2, 3, 4, Program, Color, Brightness or Speed.
• All indicators flash momentarily once to confirm the setting.
• The existing mode ends and changes to normal mode automatically.
Different keys represent different fadetime:
Keys
1
2
3
4
P/C/B/S
Fadetime
1s
2s
3s
4s
0s (no fade)
6. Scene
6.1 Customizing a scene
Up to 4 scenes can be recorded and played back in this mode. Each figure key corresponds to one scene.
The procedure to record a scene is described below:
•
•
•
•
Touch “Program” or “Speed” key to enable Auto Mode, the key clicks and the LED indicator lights up.
Rotate the touch toggle to select 1 of 10 built-in programs or adjust the speed.
Touch any of the figure keys to which you wish to record the scene, and hold on for more than 2 seconds.
All indicators flash momentarily once to indicate the current parameters (including the built-in program
and the value of speed and brightness) have been recorded and saved into the key.
• Repeat these step to save more scenes to the other 3 figure keys.
6.2 Playback scene
Touch “Program” or “Speed” key to enable Auto Mode. Then touch the corresponding button of 1~4 to select
the scene which has been assigned to it. The LED indicator lights up and it starts to display the recorded scene.
6.3 Scene record lock/unlock
To lock scene record, touch “Speed” key and “Program” key simultaneously and hold on for about 10 seconds.
At this time, the “Speed” key is not valid. Besides, the figure keys1~4 can play back saved scenes only, but
can not record scenes.
To unlock scene record, touch “Program” key and “Speed” key and hold on for about 10 seconds until all
keys flash once.
NOTE: Each figure key can have a color, or a scene, or both elements recorded.
7. Key tone
To turn on or turn off key tone, keep the four figure keys--”1”, “2” , “3” and “4” touched simultaneously until all
keys flash momentarily once to confirm the setting, then release them.
With key tone ON, when you rotate the touch toggle to the maximum or minimum value, the key click
disappears.
With key tone OFF, when you rotate the touch toggle to the maximum or minimum value, all keys flash
repeatedly 3 times.
8. Default setting
Touch “Program” key and “Brightness” key simultaneously and hold on for about 10s until all keys flash once
to resume default setting. All the settings by the user are deleted. The fadetime for color change and power
ON/OFF is 2 seconds, and the recorded scenes will be replaced by default setting.