ASSEMBLY MANUAL / OWNER’S MANUAL
TABLE OF CONTENTS
Important Safety Instructions - Assembly
3
Safety Warning Labels / Serial Number
4
Specifications
5
Before Assembly
5
Parts6
Hardware7
Tools7
Assembly8
Moving the Machine
18
Leveling the Machine
19
Important Safety Instructions 20
Features21
Console Features
22
Bluetooth® Connectivity
25
Remote Heart Rate Monitor
26
Operations28
Adjustments
28
Power Up / Idle Mode
28
Initial Setup
29
Quick Start Program
29
User Profiles
29
Profile Programs
31
Pausing or Stopping
34
Results / Cool Down Mode
35
GOAL TRACK Statistics
35
Console Service Mode
37
Maintenance38
Maintenance Parts
39
Troubleshooting40
Warranty42
To validate warranty support, keep the original proof of purchase and record the following information:
Serial Number __________________________
Date of Purchase ____________________
To register your product warranty , go to: www.Nautilus.com/register
Or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369,
csnls@nautilus.com | outside U.S. +01-360-859-5180, technics@nautilus.com | © 2013 Nautilus, Inc. Polar®, OwnCode®,
Bluetooth®, iTunes® and MyFitnessPal® are trademarks of their respective owners.
2
IMPORTANT SAFETY INSTRUCTIONS
-ASSEMBLY
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Obey the following warnings:
Read and understand all warnings on this machine.
Carefully read and understand the Assembly instructions.
•
Keep bystanders and children away from the product you are assembling at all times.
•
Do not connect power supply to the machine until instructed to do so.
•
Do not assemble this machine outdoors or in a wet or moist location.
•
Make sure assembly is done in an appropriate work space away from foot traffic and exposure to bystanders.
•
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
•
Set up this machine on a solid, level, horizontal surface.
•
Do not try to change the design or functionality of this machine. This could compromise the safety of this machine and
will void the warranty.
•
If replacement parts are necessary, use only genuine Nautilus® replacement parts and hardware. Failure to use
genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the
warranty.
•
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the
Manual.
•
Read and understand the complete Manual supplied with this machine before first use. Keep the Manual for future
reference.
•
Do all assembly steps in the sequence given. Incorrect assembly can lead to injury or incorrect function.
•
This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close
range. Users may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given
the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical
provider in connection with the use of this equipment. Please consult the “Safety Warning Labels and Serial Number”
section to determine the location of the magnets on this product.
3
SAFETY WARNING LABELS AND
SERIAL NUMBER
• Read, understand and obey all
warnings on this machine.
• Keep children away.
• Not intended for use by anyone
under 14 years of age.
• Prior to use, read and understand
the Owner’s Manual.
• Injury or death is possible if
Caution is not used while using this
machine.
• The maximum user weight for this
machine is 300 lbs (136 kg).
• Replace any “Caution”, “Warning”
or “Danger” label that is illegible,
damaged, or removed.
• The heart rate displayed is an
approximation and should be used
for reference only.
Serial Number
Product Specification
• Lisez et assimilez tous les avertissements
apposés sur cet appareil.
• Gardez les enfants et les animaux de
compagnie éloignés de cette machine en
tout temps
• Déconseillé aux enfants âgés de
moins de 14 ans.
• Lisez et familiarisez-vous avec le Manuel
du propriétaire et avec tous les
avertissements avant d’utiliser cette
machine.
• Soyez prudent lorsque vous utilisez cet
équipement pour ne pas vous infliger de
graves blessures.
• Cette machine supporte un poids
maximal de 300lbs. (136kg).
• Remplacez toute étiquette
d’avertissement endommagée, illisible
ou manquante.
• La fréquence cardiaque qui s’affiche
sur la console est une approximation
et doit être utilisée seulement à titre
indicatif.
8002739_B
FCC Compliance
!
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
The machine and power supply comply with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: T
his machine and power supply have been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
SPECIFICATIONS
49.6”
(126 cm)
Maximum User Weight: 300 lbs. (136 kg)
Machine Weight: 91.9 lbs. (41.7 kg)
Power Requirements: Operational Voltage: 9VDC
Operating Current: 1500 mA
Regulatory Approvals:
65.3”
(165.9 cm)
28.3”
(71.8 cm)
AC Power Adapter: U
L listed, Rated 120V 60Hz Input, 9VDC,
1500mA Output. Class 2.
This product, its packaging, and components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you
would like additional information, please refer to our website at www.nautilus.com/prop65.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 77” x 114” (196 cm x 290 cm).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the “Important Safety Instructions” before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly can require 2 people.
5
PARTS
3
1
16
4
5
2
15
6
9
8
14
7
10
13 (R)
17
11 (L)
12
Item
Qty
1
1
6
Description
Console
Item
Qty
10
1
Description
Rear Stabilizer
2
1
Water Bottle Holder
11
1
Left Pedal
3
1
Seat Back
12
1
Front Stabilizer
4
1
Seat Cover
13
1
Right Pedal
5
1
Seat Frame Assembly
14
1
Top Shroud
6
1
Seat Bottom
15
1
Console Mast
7
1
Seat Adjustment Handle
16
1
MP3 Cord
8
1
Frame
17
1
AC Adapter
9
1
Seat Rail End Cap
HARDWARE / TOOLS
A
Item
Qty
A
8
B
C
D
Description
E
F
Item
Qty
Button Head Hex Screw, M8x16
F
2
G
H
I
Description
Phillips Head Screw, M5x12
B
10
Button Head Hex Screw, M6x12
G
14
Lock Washer, M6
C
8
Flat Washer, M8
H
4
Curved Washer, M6
D
8
Lock Washer, M8
I
4
Phillips Head Screw, M6x25
E
10
Flat Washer, M6
Tools
Included Not Included
(recommended)
4 mm
6 mm
7
ASSEMBLY
1a. Attach Stabilizers to Frame
Note: H
ardware(*) is pre-installed on the stabilizers and not on Hardware Card. Make sure transport wheels on
the front stabilizer point forward.
6mm
X2
*
6mm
*
X2
*
*
8
*
*
10
12
1b. Attach the Seat Rail End Cap to the Frame Assembly
8
9
2. Attach the Seat Frame Assembly to the Seat Rail
NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it.
X4
6mm
A
D
C
5
X2
B
G
E
4mm
9
3. Attach Seat Pads to Seat Frame Assembly
3
6
X8
E
G
B
4mm
X4
H
G
I
#2
10
4. Attach Cover to Frame Assembly
4
11
5. Attach Seat Adjustment Handle to Frame Assembly
7
12
6. Connect the Cables and Attach the Console Mast to Frame Assembly
NOTICE: Do not crimp the cables.
15
14
X4
D
C
A
6mm
13
7. Remove Hardware from Console
NOTICE: Do not crimp the cable.
1
Note: H
ardware (*) is pre-installed and not on the Hardware Card.
If desired, apply the French Canadian overlay to the Console
face.
X4
*
#2
8. Connect Cables and Attach Console to Frame Assembly
NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp cables.
1
X4
*
14
9. Attach Pedals to Frame Assembly
NOTICE: T
he Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation
is based from a seated position on the bike. The Left Pedal has an “L”, the Right Pedal an “R”.
13 (R)
11 (L)
15
10. Attach Water Bottle Holder to Frame Assembly
#2
X2
F
2
16
11. Connect AC Adapter to Frame Assembly
17
12. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Be sure to record the serial number in the field provided at the front of this manual.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s
Manual.
17
BEFORE YOU START
Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you
and others are all physically fit and able to move the machine safely.
1.Remove the power cord.
2.Use the Transport Handle to carefully lift the machine onto the transport rollers.
3.Push the machine into position.
4.Carefully lower the machine into position.
NOTICE: B
e careful when you move the bike. Abrupt motions can affect the computer operation.
18
Leveling the Machine
Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the stabilizer
foot to adjust.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to
the machine can occur.
To adjust the leveler on the Frame Rail:
1.Loosen the upper locking nut.
2.Turn the leveler to adjust the height.
Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or
damage to the machine can occur.
3.Tighten the upper locking nut to lock the leveler.
Make sure the bike is level and stable before you exercise.
19
IMPORTANT SAFETY INSTRUCTIONS
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read and understand the complete Manual. Keep the Manual for future reference.
ead and understand all warnings on this machine. If at any time the Warning labels become loose, unreadable or
R
dislodged, contact Nautilus® Customer Service for replacement labels.
•
Children must not be let on or near to this machine. Moving parts and other features of the machine can be dangerous
to children.
•
Not intended for use by anyone under 14 years of age.
•
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your
chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values
calculated or measured by the machine’s computer for reference purposes only.
•
Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor
the Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service for repair information.
•
Maximum user weight limit: 300 lbs. (136 kg). Do not use if you are over this weight.
•
This machine is for home use only.
•
Do not wear loose clothing or jewelry. This machine contains moving parts. Do not put fingers or other objects into
moving parts of the exercise equipment.
•
Set up and operate this machine on a solid, level, horizontal surface.
•
Make the Pedals stable before you step on them. Use caution when you step on and off the machine.
•
Disconnect all power before servicing this machine.
•
Do not operate this machine outdoors or in moist or wet locations. Keep the foot pedals clean and dry.
•
Keep at least 24” (0.6 m) on each side of the machine clear. This is the recommended safe distance for access and
passage around and emergency dismounts from the machine. Keep third parties out of this space when machine is in
use.
•
Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
•
Correctly adjust and safely engage all Positional Adjustment Devices. Make sure that the Adjustment Devices do not
hit the user.
•
Exercise on this machine requires coordination and balance. Be sure to anticipate that changes in speed and
resistance level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.
•
Prior to use, read and understand the owner’s manual. The appliance is not to be used by persons with functional
limitations and impairments, reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
20
FEATURES
C
B
A
T
A
S
D
P
P
Q
E
F
N
G
H
I
R
M
O
V
L
G
F
K
J
A
Console
L
Fully Shrouded Flywheel
B
MP3 Input
M
Pedal
C
USB Port
N
Storage Bin
D
Water Bottle Holder
O
Seat Adjustment Handle
E
Transport Handle
P
Handlebar, Upright
F
Stabilizer
Q
Speakers
G
Leveler
R
Fan
H
Handlebar, Side
S
Media Tray
I
Contact Heart Rate (CHR) Sensors
T
Telemetry Heart Rate (HR) Receiver
J
Power Connector
U
Bluetooth® Connectivity (not shown)
K
Transport Wheels
V
MP3 Cord
21
Console Features
The Console provides important information about your workout and lets you control the resistance levels while you
exercise. The Console features the Nautilus Dual Track™ display with touch control buttons to navigate you through the
exercise programs.
Upper Display
10
9
8
7
6
5
4
3
2
1
100%
Anaerobic
80-90%
Aerobic
70-80%
Fat burn
50-70%
Warm up
Less than
50%
SPEED
TIME
DISTANCE
MPH km/h Hr MIN
AVG
DISTANCE
LEVEL
MILES KM
RPM
AVG
HEART RATE
BPM
CALORIES
AVG
Lower Display
21
15
Resistance Level Quick Buttons
9
GOAL TRACK
LAST WORKOUT
LONGEST WORKOUT
LAST 7 DAYS
CALORIE RECORD
SHARE AND TRACK
YOUR PROGRESS
LAST 30 DAYS
25
USER
PROGRAMS
OK
5
1
CURRENT WORKOUT
QUICK START
18
12
7
PAUSE/END
Achievement Indicator Lights
Resistance Level Quick Buttons
3
Fan
Keypad Functions
Resistance Increase () button-Increases the workout resistance level
Resistance Decrease () button- Decreases the workout resistance level
QUICK START button- Begins a Quick Start workout
USER button- Selects a User profile
PROGRAMS button- Selects a category and workout program
PAUSE / END button- Pauses an active workout, ends a paused workout, or goes back to the previous screen
GOAL TRACK button- Displays the Workout Totals and Achievements for the selected User Profile
Increase () button-
Increases a value (age, time, distance, or calories) or moves through options
Left () button- Displays different workout values during a workout, and moves through options
OK button- Starts a Program workout, confirms information, or resumes a paused workout
Right () button- Displays different workout values during a workout, and moves through options
Decrease () button- Decreases a value (age, time, distance, or calories) or moves through options
FAN button- Controls 3-speed fan
22
Resistance Level Quick Buttons- Shifts the resistance levels to the setting quickly during a workout
Achievement Indicator Lights- when an achievement level is reached or a result is reviewed, the achievement indicator
light will activate
Nautilus Dual Track™ Display
Upper Display Data
Program Display
10
9
8
7
6
5
4
3
2
1
100%
Anaerobic
80-90%
Aerobic
70-80%
Fat burn
50-70%
Warm up
Less than
50%
User Display
Achievement Display
Program Display
The Program Display shows information to the User and the grid display area shows the course profile for the program.
Each column in the profile shows one interval (workout segment). The higher the column, the higher the resistance level.
The flashing column shows your current interval.
SPEED
TIME
DISTANCE
MPH km/h Hr MIN
AVG
DISTANCE
LEVEL
MILES KM
RPM
AVG
HEART RATE
BPM
CALORIES
AVG
Intensity Display
The Intensity Display shows the level of work at that moment based on the current resistance level.
21
CURRENT WORKOUT
LAST WORKOUT
LONGEST WORKOUT
LAST 7 DAYS
25
CALORIE RECORD
LAST 30 DAYS
Heart Rate Zone Display
GOAL TRACK
USER
The Heart Rate Zone shows15
which zone the current heart rate value falls into for the current 18
User. These Heart Rate
Zones can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn).
Consult a physician before
9 you start an exercise program. Stop exercising if you feel pain
12 or tightness in your chest,
PROGRAMS
become short of breath, or feel faint. Contact your doctor before you use
the machine again. The heart rate
displayed is an approximation and should be used forOK
reference only.
SHARE AND TRACK
YOUR PROGRESS
5
7
Note: If no heart rate is detected, the display will be blank.
3 electronic devices in the left
1 with
NOTICE: T
o prevent interference
the telemetry
HR receiver, do not place
any personal
QUICK
START
PAUSE/END
side of the media tray.
Goal Display
The Goal Display shows the currently selected type of goal (Distance, Time or Calories), the current value to achieve the
goal, and the percent completed toward the goal.
User Display
The User Display shows which User Profile is currently selected.
Achievement Display
The Achievement Display activates when a workout goal is reached or a workout milestone is surpassed from past
workouts. The Console display will congratulate and inform the User of their achievement, along with a celebratory sound.
23
50%
1
Lower Display Data
SPEED
TIME
DISTANCE
MPH km/h Hr MIN
AVG
DISTANCE
MILES KM
LEVEL
RPM
AVG
HEART RATE
CALORIES
BPM
AVG
The Lower Display shows the Workout Values and can be customized for each User. (Consult the “Edit User Profile”
section of this manual.)
21
CURRENT WORKOUT
LAST WORKOUT
LONGEST WORKOUT
LAST 7 DAYS
25
Speed
CALORIE RECORD
LAST 30 DAYS
GOAL TRACK
USER
The SPEED display field shows
hour (km/h).
15 the machine speed in miles per hour (mph) or kilometers per
18
9
12
Time
PROGRAMS
The TIME display field shows the total time count of the workout, the average
Time for the User Profile, or the total operaOK
tional time of the machine.
SHARE AND TRACK
YOUR PROGRESS
5
7
Note: If a Quick Start workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift
to hours and minutes ( 1 hour, 40 minutes ).
1
QUICK START
PAUSE/END
3
Distance
The DISTANCE display shows the distance count (miles or km) in the workout.
Note: To change the measurement units to English Imperial or metric, refer to the “Console Setup Mode” section in
this manual.
Level
The LEVEL display shows the current resistance level in the workout.
RPM
The RPM display field shows the pedal revolutions per minute (RPM).
Heart Rate (Pulse)
The HEART RATE display shows the beats per minute (BPM) from the heart rate monitor. When a heart rate signal is
received by the Console, the icon will flash.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. The heart rate
displayed is an approximation and should be used for reference only.
Calories
The CALORIES display field shows the estimated calories that you have burned during the exercise.
24
Connectivity on your fitness machine
This Nautilus® fitness machine is equipped with Bluetooth® connectivity and can wirelessly sync with the Fitness App on
supported devices.
Note: F
or a complete list of supported devices, visit www.nautilusconnect.com.
Fitness App ( “ Nautilus® Trainer ” )
The App syncs with your fitness machine to track total calories burned, time, distance, and more. Records and stores
every workout for quick reference. Plus, it automatically syncs your workout data with MyFitnessPal® to make hitting your
daily goals easier than ever! Track your results and share with friends and family.
1. Download the free App, named “ Nautilus® Trainer ”, from the iTunes® App Store.
Note: For a complete list of supported devices, visit www.nautilusconnect.com.
2. Follow the instructions on the App to sync your device to your exercise machine.
An information and common questions guide for the App can can be found online at www.nautilusconnect.com.
Export Workout Results to USB Drive
This Nautilus® fitness machine is equipped with a USB Port and can export your Workout Results to a USB Drive. With
the Workouts exported from the fitness machine, connect the USB Drive to a computer and upload the file to your Nautilus
Connect™ account.
To export the GOAL TRACK statistics of a User Profile:
1.From the Power-Up screen, push the USER button to select a User Profile.
2.Push the GOAL TRACK button. The Console will display the LAST WORKOUT values and activate the corresponding
Achievement light.
3.Push the Decrease() button to move to the “CLEAR WORKOUT DATA -OK?” prompt.
4.Push the Decrease() button to move to the “SAVE TO USB - OK?” prompt. Push OK, and the “ARE YOU SURE?
-NO” prompt will display. Push the Increase() button to change it to yes and push OK. The Console will display the
“INSERT USB” prompt. Insert a USB Flash Drive into the USB Port. The Console will record the Statistics to the USB
Flash Drive.
The Console will display “SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive.
Note: Push the PAUSE/END button to force an exit from the “SAVING” prompt.
5. Push GOAL TRACK to return to the Power-Up screen.
Track Your Results at www.nautilusconnect.com
Take advantage of Nautilus Connect™ to see your progress over time and share your data with MyFitnessPal®. Review
your workouts and results away from the machine when convenient for you. Nautilus Connect™ allows for a workout
value to be selected and have it graphed for weekly, monthly, or yearly comparison review.
If using a Bluetooth® device to import workout results to Nautilus Connect™:
1. S
ign in to Nautilus Connect™ to instantly sync your workout data with it. Once you have an account, your Workouts
will be uploaded to Nautilus Connect™ immediately after a workout through your Bluetooth® device.
2.To sync your workout data with MyFitnessPal®, select the Menu option in the upper left corner of the web page and
select the “Sync to MyFitnessPal® ” option.
Note: Nautilus Connect™ will automatically sync your workouts with MyFitnessPal® after the initial syncing.
If using a USB Drive to import workout results to Nautilus Connect™:
1.Insert the USB Drive with your workout data into a device connected to the internet.
2. Sign in to Nautilus Connect™.
25
3.Click the Upload button on the web site.
4. In the Upload File window, locate your USB Drive. Select the workout data file from it, and click the upload button.
Your workout data will upload into your account.
5. T
o sync your workout data with MyFitnessPal®, select the Menu option in the upper left corner of the web page and
select the “Sync to MyFitnessPal® ” option.
Note: Nautilus Connect™ will automatically sync your workouts with MyFitnessPal® after the initial syncing.
A User’s Guide for Nautilus Connect™ can be found online at www.nautilusconnect.com.
Remote Heart Rate Monitor
Monitoring your Heart Rate is one of the best procedures to control the intensity of your exercise. Contact Heart Rate
(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.
Note: T
he heart rate chest strap must be an uncoded heart rate strap
from Polar Electro or an uncoded POLAR® compatible model.
(Coded POLAR® heart rate straps such as POLAR® OwnCode®
chest straps will not work with this equipment.)
*
If you have a pacemaker or other implanted electronic device, consult
your doctor before using a wireless chest strap or other telemetric
heart rate monitor.
NOTICE: T
o prevent interference with the telemetry HR receiver, do not
place any personal electronic devices in the left side of the media
tray. *
Contact Heart Rate Sensors
Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel
parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the
top and the bottom of the sensors. Hold firm, but not too tight or loose. Both hands must make contact with the sensors for
the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.
Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now
validate the heart rate. Many factors influence the ability of the sensors to detect your heart rate signal:
• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere
with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.
• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.
• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.
• The proximity of other electronic machines can generate interference.
If your heart rate signal ever seems erratic after validation, wipe off your hands and the sensors and try again.
Heart Rate Calculations
Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to approximately 160 BPM by
age 60. This fall in heart rate is usually linear, decreasing by approximately one BPM for each year. There is no indication
that training influences the decrease in maximum heart rate. Individuals of the same age could have different maximum
heart rates. It is more accurate to find this value by completing a stress test than by using an age related formula.
Your at-rest heart rate is influenced by endurance training. The typical adult has an at rest heart rate of approximately 72
BPM, whereas highly trained runners may have readings of 40 BPM or lower.
26
The Heart Rate table is an estimate of what Heart Rate Zone (HRZ) is effective to burn fat and improve your cardiovascular system. Physical conditions vary, therefore your individual HRZ could be several beats higher or lower than what is
shown.
The most efficient procedure to burn fat during exercise is to start at a slow pace and gradually increase your intensity
until your heart rate reaches between 60 – 85% of your maximum heart rate. Continue at that pace, keeping your heart
rate in that target zone for over 20 minutes. The longer you maintain your target heart rate, the more fat your body will
burn.
The graph is a brief guideline, describing the generally suggested target heart rates based on age. As noted above, your
optimal target rate may be higher or lower. Consult your physician for your individual target heart rate zone.
Note: As with all exercises and fitness regimens, always use your best judgment when you increase your exercise time
or intensity.
FAT-BURNING TARGET HEART RATE
Heart Rate BPM (beats per minute)
250
200
196
167
191
162
186
181
158
154
150
100
118
115
112
109
176
150
106
171
166
145
141
103
100
161
137
97
156
133
94
151
128
91
146
126
88
50
0
20-24 25-29 30-34 35-39 40-44 45-49 50-54 55-59 60-64 65-69
70+
Age
Maximum Heart Rate
Target Heart Rate Zone
(keep within this range
for optimum fat-burning)
27
OPERATIONS
What to Wear
Wear rubber-soled athletic shoes. You will need the appropriate clothes for exercise that allow you to move freely.
How Often Should You Exercise
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console
is an approximation and should be used for reference only.
• 3 times a week for 30 minutes each day.
• Schedule workouts in advance and try to follow the schedule.
Seat Adjustment
Correct seat placement encourages exercise efficiency and comfort, while reducing the risk of
injury.
1.With a Pedal in the forward position, place the ball of your foot over the center of it. Your leg
should be bent slightly at the knee.
2.If your leg is too straight or your foot cannot touch the Pedal, move the seat forward. If your
leg is bent too much, move the seat toward the back.
Step off the bike before you adjust the seat.
3.
Push down on the Seat Adjustment Handle, and adjust the seat to the desired height.
4.
Pull up the Seat Adjustment Handle to engage the locking mechanism. Be sure that the
handle is fully engaged.
Foot Position / Pedal Strap Adjustment
Foot pedals with straps provide secure footing to the exercise bike.
1.Rotate the Pedals until one can be reached.
2.Put the ball of each foot on the Pedals.
3.Fasten the strap over the shoe.
4.Repeat for the other foot.
Be sure toes and knees point directly forward to ensure maximum Pedal efficiency. Pedal straps
can be left in position for subsequent workouts.
Power-Up / Idle Mode
The Console will enter Power-Up / Idle Mode if it is plugged into a power source, any button is pushed, or if it receives a
signal from the RPM sensor as a result of pedaling the machine.
Auto Shut-Off (Sleep Mode)
If the Console does not receive any input in approximately 5 minutes, it will automatically shut off. The LCD display is off
while in Sleep Mode.
Note: The Console does not have an On/Off switch.
28
Initial Setup
During the first power-up, the Console should be setup with the date, time and your preferred measurement units.
1. D
ate: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons
to change which segment is the currently active value (month / day / year).
2.Push OK to set.
3. T
ime: Push the Increase/Decrease buttons to adjust the currently active value (flashing). Push the Left/Right buttons
to change which segment is the currently active value (hour / minute / AM or PM).
4.Push OK to set.
5. U
nits of Measurement: Push the Increase/Decrease buttons to adjust between “MILES” (Imperial English) or “KM”
(metric).
6. Push OK to set. The Console goes back to the Power-Up / Idle Mode screen.
Note: To adjust these selections, consult the “Console Set-Up Mode” section.
Quick Start ( Manual ) Program
The Quick Start ( Manual ) program lets you start a workout without entering any information.
During a Manual Workout, each column represents a 2 minute time period. The active column will advance across the
screen every 2 minutes. If the workout lasts for more than 30 minutes, the active column is fixed on the farthest column on
the right and pushes the previous columns off the display.
1. Sit on the machine.
2. P
ush the User button to select the correct User profile. If you do not have a User profile set up, you can select a User
profile that has no customized data (default values only).
3. Push the QUICK START button to start the Manual program.
4.To change the resistance level, push the Resistance Increase/Decrease buttons. The current interval and future
intervals are set to the new level. The default Manual resistance level is 4. The time will count up from 00:00.
Note: If a Manual workout is performed for more than 99 minutes and 59 seconds (99:59), the units for Time will shift to
hours and minutes ( 1 hour, 40 minutes ).
5. W
hen done with your workout, stop pedaling and push PAUSE/END to pause the workout. Push PAUSE/END again
to end the workout.
Note: The workout results are recorded to the current User Profile.
User Profiles
The Console lets you store and use 4 User profiles. The User profiles automatically record the workout results for each
workout, and allow the workout data to be reviewed.
The User profile stores the following data:
•
•
•
•
•
•
ame—up to 10 characters
N
Age
Weight
Height
Gender
Preferred Workout Values
Select a User Profile
Every workout is saved to a User Profile. Be sure to select the proper User Profile before starting a workout. The last User
that completed a workout will be the default user.
29
User Profiles are assigned the default values until they are customized by editing. Be sure to edit the User Profile for more
accurate calorie and heart rate information.
From the Power-Up Mode screen, push the User button to select one of the User Profiles. The Console will display the
name of the User Profile and the User Profile Icon.
Edit User Profile
1.From the Power-Up Mode screen, push the User button to select one of the User Profiles.
2.Push the OK button to select it.
3.The Console display shows the EDIT prompt and the current User Profile name. Push OK to start the Edit User Profile
option.
To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up Mode
screen.
4.
The Console display shows the NAME prompt and the current User Profile name.
Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters.
The currently active segment will flash. Use the Increase/Decrease buttons to move through the alphabet and blank
space (found between A and Z). To set each segment, use the Left() or Right() buttons to shift between segments.
Push the OK button to accept the displayed User name.
5. T
o edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT HEIGHT, EDIT GENDER), use the Increase/Decrease
buttons to adjust, and push OK to set each entry.
6.The Console display shows the SCAN prompt. This option controls how the workout values are displayed in the Lower
Display during a workout. The “OFF” setting allows the user to push the RIGHT or LEFT buttons to view the other
workout value channels when desired. The “ON” setting allows the Console to automatically display the workout value
channels every 6 seconds.
The default is “OFF”.
Push the OK button to set how the workout values are displayed.
7.The Console display shows the WIRELESS HR prompt. If you are using the Console speakers at their higher settings
and / or using a larger sized personal electronic device, the Console may show Heart Rate interference. This option
allows the Telemetry Heart Rate Receiver to be deactivated blocking the interference.
he Upper Display shows the current value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to
T
change the value.
The default is “ON”.
Push the OK button to set the Telemetry Heart Rate Receiver to active.
8.The Console display shows the EDIT LOWER DISPLAY prompt. This option allows you to customize which Workout
Values are displayed during a workout.
he Lower Display will show all of the workout values, with the active Workout Value flashing. The Upper Display
T
shows the active value setting: “ON” or “OFF”. Push the Increase() or Decrease() buttons to hide the active
workout value, and push the Left() or Right() buttons to shift the active workout value.
Note: to show a hidden workout value, repeat procedure and change Upper Display value to “ON” for that value.
When done with customizing the Lower Display, push the OK button to set it.
Hr
30
9.The Console will go to the Power-Up Mode screen with the user selected.
Reset a User Profile
1.From the Power-Up Mode screen, push the User button to select one of the User Profiles.
2.Push the OK button to select it.
3.The Console display shows the current User Profile name and the EDIT prompt. Push the Increase() or Decrease()
buttons to change the prompt.
Note: To exit the Edit User Profile option, push the PAUSE/END button and the console will go back to the Power-Up
Mode screen.
4.The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User
Profile option.
5. T
he Console will now confirm the request to reset the User profile (the default selection is ‘NO’). Push the Increase()
or Decrease() buttons to adjust the selection.
6.
Push OK to make your selection.
7. The Console will go to the Power-Up Mode screen.
Changing Resistance Levels
Push the Resistance Level Increase() or Decrease() buttons to change the resistance level at any time in a workout
program. To rapidly change the resistance level, push the desired Resistance Level Quick Button. The Console will adjust
to the selected resistance level of the quick button.
Profile Programs
These programs automate different resistance and workout levels. The Profile Programs are organized into Categories
(Fun Rides, Mountains, and Challenges).
ndary Case 6: Profile Programs
Secondary
Case a
6: User
Profile Programs
Note: Once
views
Categories.
all the Categories, they will be expanded to display the Programs within each of the
Rolling
Hills
Rolling Hills
Ride in the Park
Ride ininthe
Park
Rolling
HillsRide
the
Park Easy Tour
FUN RIDES
FUN RIDES
FUN RIDES
Easy Tour
Stream Crossing
EasyRolling
Tour Hills
Stream
Crossing
Easy
Tour
Crossing
Easy
Tour
Crossing
Rolling
Hills Stream
RideStream
in the Park
Ride in the
Park
Easy Tour
Easy Tour
Stream Crossing
Pike’s Peak
Pyramids
Pyramids
Summit Pass
Pyramids
Summit
Pass
Pyramids
Summit
Pike’s Peak
Pike’s Peak
Mount
Hood Pass
Mount Hood
Pike’s
Peak Mount
Hood
Pyramids
Pyramids
Summit Pass
Uphill Finish
MOUNTAINS
FUN RIDES
MOUNTAINS
FUN RIDES
ondary Case 6: Profile Programs
Secondary Case 6: Profile Programs
Pike’s Peak
Mount Hood
Mount Hood
Interval
Uphill Finish
CHALLENGES
MOUNTAINS
LENGES
LENGES
CHALLENGES
MOUNTAINS
MOUNTAINS
Uphill Finish
Cross-Training
Cross-Training
Interval
Interval
Stairs
Interval
Uphill Finish
Stairs
Cross-Training
Stairs
Cross-Training
Interval
Interval
Stairs
31
FUN
FUN
Pike’s Peak
Easy Tour
Stream Crossing
Pike’s Peak
Mount Hood
Stream Crossing
Mount Hood
Pyramids
Pyramids
Summit Pass
Summit Pass
PyramidsSummit
Pass
MOUNTAINS
MOUNTAINS
Easy Tour
Pyramids
Pyramids
Summit Pass
Interval
Interval
Stairs
Pyramids
Pyramids
Summit Pass
Summit Pass
Uphill Finish
Uphill Finish
Cross-Training
Cross-Training
Uphill
Finish Cross-Training
Interval
Interval
Stairs
Stairs
CHALLENGES
CHALLENGES
CHALLENGES
Interval
Interval
Stairs
Stairs
IntervalStairs
Workout Profile and Goal Program
The Console lets you select the Profile Program and type of Goal for your workout (Distance, Time or Calories), and set
REVED : 122612
the Goal value.
REVED : 122612
1. Sit on the machine.
2. Push the User button to select the correct User profile.
3.Push the Programs button.
4.Push the Left() or Right() buttons to select a Category of Workout.
5. Push the Increase() or Decrease() buttons to select a Profile Workout, and push OK.
6.Use the Increase() or Decrease() buttons to select a type of Goal (Distance, Time or Calories), and push OK.
7.
Use the Increase() or Decrease() buttons to adjust the workout value.
8.
Push OK to begin the goal-oriented workout. The GOAL value will count down as the value for percent completed
increases.
ote: During a Calories Goal, each column is for a 2 minute time period. The active column will advance across the
N
screen every 2 minutes. If the workout lasts for more than 30 minutes, the active column will fix to the last right
column and push the previous columns off the display.
Fitness Test Program
The Fitness Test measures the improvements to your physical fitness level. The test compares your power output (in
watts) to your heart rate. As your fitness level improves, your power output will increase at a given heart rate.
Note: The Console must be able to read the heart rate information from the Contact Heart Rate (CHR) sensors or Heart
Rate Monitor (HRM) to work correctly.
You can start the Fitness Test from the FEEDBACK category. The Fitness Test program first prompts you to select your
fitness level—Beginner ( “BEG” ) or Advanced ( “ADV” ). The Console will use the Age and Weight values for the selected
User Profile to calculate the Fitness Score.
Start to work out and hold the Heart Rate Sensors. When the test starts, the intensity of the workout slowly increases. This
means you will work harder, and as a result, your heart rate increases. The intensity continues to increase automatically
32
until your heart rate reaches the “Test Zone”. This zone is individually computed to be near 75 percent of the maximum
heart rate of your User Profile. When you reach the Test Zone, the machine holds the intensity steady for 3 minutes.
This lets you reach a stable condition (where your heart rate becomes steady). At the end of the 3 minutes, the Console
measures your heart rate and the power output. These numbers, along with information about your age and weight, are
computed to produce a “Fitness Score”.
Note: F
itness Test scores should only be compared to your previous scores and not to other User Profiles.
Compare your Fitness Scores to see your improvement.
Recovery Test Program
Recovery Test shows how quickly your heart recovers from an exercise state to a more restful state. Improved recovery is
an indicator of increasing fitness.
Note: The Console must be able to read the heart rate information from the Contact Heart Rate (CHR) sensors or Heart
Rate Monitor (HRM) to work correctly.
From an elevated heart rate, select the Recovery Test Program. The Console will show “STOP EXERCISING” and the
goal will begin to count down. Stop exercising but continue to grip the contact heart rate sensors. After 5 seconds, the
display will show “RELAX” and will continue to count down to 00:00. For the entire minute the console will also show your
heart rate. You must grip the heart rate sensors for the duration of the test if not using a Remote Heart Rate Monitor.
The display will continue to show “RELAX” and your heart rate until the goal reaches 00:00. The console will then calculate your recovery score.
Recovery Score = Your heart rate at 1:00 (the beginning of the test) minus your heart rate at 00:00 (the end of the test).
The higher the Recovery Test score value, the quicker your heart rate is returning to a more restful state and is an indication of improving fitness. By recording these values over time you can see the trend toward better health.
When you select the Recovery Test Program and there is no heart rate signal or display, the Console will show “NEED
HEART RATE”. This message will show for 5 seconds. If no signal is detected, the program will end.
Helpful Tip: For a more relevant score, try to obtain a steady heart rate for 3 minutes before starting the Recovery Program. This will be easier to achieve, and obtain the best result, in the Manual program so you can control the levels of
resistance.
Heart Rate Control (HRC) Workout Programs
The Heart Rate Control (HRC) programs let you set a heart rate goal for your workout. The program monitors your heart
rate in beats per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor
(HRM) chest strap, and adjusts the workout to keep your heart rate in the selected zone.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the HRC program
to work correctly.
The Target Heart Rate programs use your age and other User information to set the Heart Rate Zone values for your
workout. The console display then gives prompts for you to set up your workout:
1. Select the Heart Rate Control workout level: BEGINNER ( “BEG” ) or ADVANCED ( “ADV” ) and push OK.
2.Push the Increase() or Decrease() buttons to select the percentage of maximum heart rate: 50–60%, 60–70%,
70–80%, 80–90%.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console
is an approximation and should be used for reference only.
33
3.
Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
4.
Push the Increase() or Decrease() buttons to set the goal value for the workout.
Note: Be sure to allow time for your heart rate to reach the desired heart rate zone when setting the goal.
5. Push OK to start the workout.
A User can set a Heart Rate zone instead of a value by selecting the Heart Rate Control - User program. The Console will
adjust the workout to keep the User in the desired Heart Rate zone.
1.Select HEART RATE CONTROL - USER, and push OK.
2.Push the Increase() or Decrease() buttons to set the Heart Rate zone for the workout, and push OK. The Console
shows the Heart Rate zone (percent) on the left, and the Heart Rate range for the User on the right side of the display.
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest,
become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or measured by the machine’s computer for reference purposes only. The heart rate displayed on the console
is an approximation and should be used for reference only.
3.
Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
4.
Push the Increase() or Decrease() buttons to set the value for the workout.
5. Push OK to start the workout.
Changing a Workout Program During a Workout
The Console allows a different Workout Program to be started from an active workout.
1.From an active workout, push PROGRAMS.
2.Push the Increase() or Decrease() buttons to select the desired workout program, and push OK.
3.
Push the Increase() or Decrease() buttons to select the Goal type, and push OK.
4.
Push the Increase() or Decrease() buttons to set the value for the workout.
5. Push OK to stop the active workout and start the new workout.
The previous workout values are saved to the User Profile.
Pausing or Stopping
The Console will go into Pause Mode if the user stops pedaling and pushes PAUSE/END during a workout, or there is no
RPM signal for 5 seconds (user not pedaling). The Console will cycle through a series of messages that change every 4
seconds:
- WORKOUT PAUSED
- PEDAL TO CONTINUE (if a bike) / STRIDE TO CONTINUE (if an elliptical)
- PUSH END TO STOP
During a paused workout, you can use the Increase/Decrease buttons to move through the result channels manually.
1. Stop pedaling and push the PAUSE/END button to pause your workout.
2. To continue your workout, push OK or start pedaling.
To stop the workout, push the PAUSE/END button. The Console will go into Results / Cool Down mode.
34
Results / Cool Down Mode
After a workout the GOAL display shows 03:00 and then starts to count down. During this Cool Down period, the Console
shows the Workout Results. All workouts except Quick Start have a 3-minute Cool Down period.
The LCD display shows the Current Workout values in three channels:
a.)TIME (total), DISTANCE (total), and CALORIES (total)
b.)SPEED (average), RPM (average), and HEART RATE (average)
c.)
TIME (average), LEVEL (average), and CALORIES (average).
Push the Left() or Right() buttons to move through the result channels manually.
During the Cool Down period, the Resistance Level will adjust to a third of the average Level of the workout. The Cool
Down resistance level can be adjusted with the Resistance Increase and Decrease buttons, but the Console will not display the value.
You can push PAUSE/END to stop the Results / Cool Down period and go back to Power-Up Mode. If there is no RPM or
HR signal, the Console automatically goes into Sleep Mode.
GOAL TRACK Statistics (and Achievements)
The statistics from every workout are recorded to a User Profile.
The Nautilus Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels:
a.)TIME (total), DISTANCE (total), and CALORIES (total)
b.)SPEED (average), RPM (average), and HEART RATE (average)
c.)
TIME (average), DISTANCE (average) / or LEVEL (average) *, and CALORIES (average)
* If the Goal Track Statistic is a single workout, LEVEL (average) is displayed. If the Goal Track Statistic is a
combination of multiple workouts, DISTANCE (average) is displayed instead of LEVEL (average).
To view the GOAL TRACK statistics of a User Profile:
1.From the Power-Up screen, push the User button to select the correct User profile.
2.Push the GOAL TRACK button. The Console will display the LAST WORKOUT values and activate the corresponding
Achievement light.
Note: G
oal Track statistics can be viewed even during a workout. Push GOAL TRACK and the LAST WORKOUT values
will be displayed. The workout values for the current workout will be hidden except for the GOAL display. Push
GOAL TRACK again to return to the Power-Up screen.
3.Push the Increase() button to move to the next GOAL TRACK statistic, “LAST 7 DAYS”. The Console will display
the calories burned on the display (50 calories per segment) for the previous seven days, along with the workout value
totals. Use the Left() or Right() buttons to move through all the workout statistic channels.
4.Push the Increase() button to move to “LAST 30 DAYS”. The Console will display the total values for the previous
thirty days. Use the Left() or Right() buttons to move through all the workout statistic channels.
5. P
ush the Increase() button to move to the “LONGEST WORKOUT”. The Console will display the workout values with
the most Time value. Use the Left() or Right() buttons to move through all the workout statistic channels.
6.Push the Increase() button to move to the “CALORIE RECORD”. The Console will display the workout values with the
most Calories value. Use the Left() or Right() buttons to move through all the workout statistic channels.
7.Push the Increase() button to move to “BMI”, or Body Mass Index. The Console will display the BMI value based on
the User settings. Be sure the height value is correct for your User Profile, and the weight value is current.
35
The BMI Measurement is a useful tool that shows the relationship between weight and height that is associated with body
fat and health risk. The table below gives a general rating for the BMI score:
Underweight
Below 18.5
Normal
18.5 – 24.9
Overweight
25.0 – 29.9
Obesity
30.0 and above
Note: T
he rating may overestimate body fat in athletes and others who have a muscular build. It may also underestimate body fat in older persons and others who have lost muscle mass.
Contact your doctor for more information about Body Mass Index (BMI) and the weight that is appropriate for you.
Use the values calculated or measured by the machine’s computer for reference purposes only.
8.Push the Increase() button to move to the “SAVE TO USB - OK?” prompt. Push OK and the “ARE YOU SURE?
-NO” prompt will display. Push the Increase() button to change it to yes and push OK. The Console will display the
“INSERT USB” prompt. Insert a USB Flash Drive into the USB Port. The Console will record the Statistics to the USB
Flash Drive.
The Console will display “SAVING”, and then “REMOVE USB” when it is safe to remove the USB Flash Drive.
Note: Push the PAUSE/END button to force an exit from the “SAVING” prompt.
9.Push the Increase() button to move to the “CLEAR WORKOUT DATA -OK?” prompt. Push OK, and the “ARE YOU
SURE? - NO” prompt will display. Push the Increase() button to change to the “ARE YOU SURE? - YES” display, and
push OK. The user workouts have been reset.
10.Push GOAL TRACK to return to the Power-Up screen.
When a User performs a workout that surpasses the “LONGEST WORKOUT” or “CALORIE RECORD” of the previous
workouts, the Console will congratulate with an audible sound and tell the User the new achievement. The corresponding
Achievement Indicator Light will also be active.
36
CONSOLE SETUP MODE
The Console Setup Mode lets you input the date and time, set the units of measurement to either English or Metric,
control the sound settings ( on/ off), or see maintenance statistics (Error Log and Run Hours – for service technician use
only).
1.Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into
the Console Setup Mode.
Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.
2.The Console display shows the Date prompt with the current setting. To change, push the Increase/Decrease buttons
to adjust the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently
active value (month / day / year).
3.Push OK to set.
4.The Console display shows the Time prompt with the current setting. Push the Increase/Decrease buttons to adjust
the currently active value (flashing). Push the Left/Right buttons to change which segment is the currently active value
(hour / minute / AM or PM).
5. Push OK to set.
6.The Console display shows the Units prompt with the current setting. To change, push OK to start the Units option.
Push the Increase/Decrease buttons to change between “MILES” (Imperial English units) and “KM” (metric units).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
7. Push OK to set.
8.The Console display shows the Sound Settings prompt with the current setting. Push the Increase/Decrease buttons
to change between “ON” and “OFF”.
9. Push OK to set.
10.The Console display shows the TOTAL RUN HOURS for the machine.
11. For the next prompt, push the OK button.
12. The Console display shows the Software Version prompt.
13. For the next prompt, push the OK button.
14.The Console will display the Power-Up Mode screen.
37
MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular
maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer
supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus® Customer Service for
replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always
unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning,
maintaining or repairing the machine. Place the power cord in a secure location.
Before each use, examine the exercise machine for loose, broken, damaged, or
worn parts. Do not use if found in this condition. Repair or replace all parts at the
first sign of wear or damage. After each workout, use a damp cloth to wipe your
machine and Console free of moisture.
Daily:
Note: Avoid excessive moisture on the Console.
Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for
smooth seat slider operation. If needed, apply a very thin coating of silicone lube to
ease operation.
Weekly:
Note: Do not use petroleum based products.
Monthly
or after 20 hours:
38
Check pedals and crank arms and tighten as necessary. Make sure all bolts and
screws are tight. Tighten as necessary.
NOTICE: D
o not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free
of moisture.
Maintenance Parts
A
C
T
V
B
D
V
T
S
F
E
G
U
W
P
O
GG
H
N
R
J
Q
I
K
DD
L
Y
X
GG
M
FF
EE
N
CC
R
AA
BB
Z
A
Console
L
Stabilizer, Front
W
Contact Heart Rate Sensor (CHR)
B
Console Mast
M
Transport Wheel
X
Flywheel
C
Seat Back
N
Pedals
Y
Drive Pulley
D
Seat Cover
O
Shroud, Right
Z
Servo Motor
E
Water Bottle Holder
P
Shroud, Upper
AA
Brake Assembly
F
Handlebar, Side
Q
Shroud, Left
BB
Drive Belt
G
Seat Bottom
R
Crank Arm
CC
Speed Sensor Magnet
H
Seat Adjustment Handle
S
Console Cable, Lower
DD
Speed Sensor
I
Frame Assembly
T
Console Cable, Upper
EE
Power Inlet
J
Rear Stabilizer
U
Heart Rate Cable, Lower
FF
AC Adapter
K
Leveler
V
Heart Rate Cable, Upper
GG
Cover, Crank Disc
39
TROUBLESHOOTING
Condition/Problem
No display/partial display/
unit will not turn on
Things to Check
Solution
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
Check data cable integrity
All wires in cable should be intact. If any are visibly crimped or
cut, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise damaged. Replace Console if damaged.
Console Display
If Console only has partial display and all connections are fine,
replace the Console.
If the above steps do not resolve the problem, contact Customer Care for further assistance.
Unit operates but Contact
HR not displayed
Unit operates but
Telemetric HR not
displayed
HR cable connection at
Console
Be sure cable is connected securely to Console.
HR cable box connection
Be sure cables from handlebars and cable to Console are
secure and undamaged.
Sensor grip
Be sure hands are centered on HR sensors. Hands must be
kept still with relatively equal pressure applied to each side.
Dry or calloused hands
Sensors may have difficulty with dried out or calloused hands.
A conductive electrode cream (heart rate cream) can help
make better conduct. These are available on the web or at
medical or some larger fitness stores.
Static Handlebar
If tests reveal no other issues, Static Handlebar should be
replaced.
Chest Strap (optional)
Strap should be “POLAR®” compatible and uncoded. Make
sure strap is directly against skin and contact area is wet.
Check User Profile
Select the Edit User Profile option for the User Profile. Go to
the WIRELESS HR setting and make sure that the current
value is set to ON.
Interference
Try moving unit away from sources of interference (TV, Microwave, etc).
Replace Chest Strap
If interference is eliminated and HR does not function, replace
strap.
Replace Console
If HR still does not function, replace Console.
Unit operates but
Telemetric HR displayed
incorrectly
Interference
Make sure that the HR receiver is not blocked by a personal
electronic device in the left side of the media tray.
No speed/RPM reading,
Console displays “Please
Pedal” error code
Check data cable integrity
All wires in cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
40
Condition/Problem
Things to Check
Solution
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor
(requires shroud removal)
Speed sensor should be aligned with magnet and connected to
data cable. Realign sensor if necessary. Replace if there is any
damage to the sensor or the connecting wire.
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet.
Check connection at front
of unit
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
Check data cable integrity
All wires in the cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
Reset machine
Unplug unit from electrical outlet for 3 minutes. Reconnect to
outlet.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check Speed Sensor
(requires shroud removal)
Speed sensor should be aligned with magnet and connected to
data cable. Realign sensor if necessary. Replace if there is any
damage to the sensor or the connecting wire.
Check data cable integrity
All wires in cable should be intact. If any are cut or crimped,
replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into place.
Reset machine
Unplug unit from electrical outlet for 3 minutes. Reconnect to
outlet.
Fan will not turn on, but
Console operates
Check for blockage of fan
Unplug unit from electrical outlet for 5 minutes. Remove material from fan. If necessary, detach the Console to help with
removal. Replace the Console if unable to remove blockage.
Unit rocks/does not sit
level
Check leveler adjustment
Adjust levelers until machine is level.
Check surface under unit
Adjustment may not be able to compensate for extremely uneven surfaces. Move machine to level area.
Seat Assembly shifts /
squeaks when in use
Hardware
Check hardware that attaches Seat assembly, and fully tighten
hardware.
Clicking sound when
pedaling
Check pedal to crank arm
connection
Remove pedals. Make sure there is no debris on threads, and
reinstall the pedals.
Pedals loose/unit difficult
to pedal
Check pedal to crank
connection
Pedal should be tightened securely to crank. Be sure connection is not cross threaded.
Check crank to axle
connection
Crank should be tightened securely to axle.
Console shuts off (enters
sleep mode) while in use
Fan will not turn on or will
not turn off
41
WARRANTY
Who Is Covered
This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).
What Is Covered
Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions, and provided it receives
proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for authentic, original, legitimate machines manufactured by
Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.
Terms
•
Frame 10 years
•
Mechanical parts
2 years
•
Electronics
1 year
•
Labor 90 days
(Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.)
How Nautilus Will Support the Warranty
Throughout the terms of the warranty coverage, Nautilus, Inc. will repair any machine that proves to be defective in materials or workmanship. Nautilus reserves the right to replace
the product in the event a repair is not possible. When Nautilus determines replacement is the correct remedy, Nautilus may apply a limited credit reimbursement toward another
Nautilus, Inc. brand Product, at our discretion. This reimbursement may be prorated based on length of ownership. Nautilus, Inc. provides repair service within major metropolitan
areas. Nautilus, Inc. reserves the right to charge the consumer for travel outside these areas. Nautilus, Inc. is not responsible for dealer labor or maintenance charges beyond the
applicable warranty period(s) stated herein. Nautilus, Inc. reserves the right to substitute material, parts or products of equal or better quality if identical materials or products are
not available at the time of service under this warranty. Any replacement of the product under the terms of the Warranty in no way extends the original Warranty period. Any limited
credit reimbursement may be prorated based on length of ownership. THESE REMEDIES ARE THE EXCLUSIVE AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.
What You Must Do
•
Retain appropriate and acceptable Proof of Purchase.
•
Operate, maintain, and inspect the Product as specified in the Product Documentation (Assembly, Owner’s Manuals, etc.).
•
Product must be used exclusively for the purpose intended.
•
Notify Nautilus within 30 days after detecting an issue with the Product.
•
Install replacement parts or components in accordance with any Nautilus instructions.
•
Perform diagnostic procedures with a trained Nautilus, Inc representative if requested.
What Is Not Covered
•
Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly instructions, maintenance instructions, or safety warnings as stated in the
Product Documentation (Assembly, Owner’s Manuals, etc), damage due to improper storage or the effect of environmental conditions such as moisture or weather, misuse,
mishandling, accident, natural disasters, power surges.
•
A machine placed or used in a commercial or institutional setting. This includes gyms, corporations, work places, clubs, fitness centers and any public or private entity that
has a machine for use by its members, customers, employees or affiliates.
•
Damage caused by exceeding maximum user weights as defined in the Product’s Owner’s manual or warning label.
•
Damage due to normal usage and wear and tear.
•
This warranty does not extend to any territories or countries outside the United States and Canada.
How to Obtain Service
For Products purchased directly from Nautilus, Inc. contact the Nautilus office listed on the Contacts page of the products Owner’s manual. You may be required to return the
defective component to a specified address for repair or inspection, at your expense. Standard ground shipping of any warranty replacement parts will be paid by Nautilus, Inc. For
products purchased from a retailer, you may be asked to contact your retailer for warranty support.
Exclusions
The preceding warranties are the sole and exclusive express warranties made by Nautilus, Inc. They supersede any prior, contrary or additional representations, whether oral or
written. No agent, representative, dealer, person or employee has the authority to alter or increase the obligations or limitations of this warranty. Any implied warranties, including
the WARRANTY OF MERCHANTABILITY and any WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the term of the applicable express warranty
provided above, whichever is longer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Limitation of Remedies
EXCEPT AS OTHERWISE REQUIRED BY APPLICABLE LAW, THE PURCHASER’S EXCLUSIVE REMEDY IS LIMITED TO REPAIR OR REPLACEMENT OF ANY COMPONENT DEEMED BY
NAUTILUS, INC. TO BE DEFECTIVE UNDER THE TERMS AND CONDITIONS STATED HEREIN. IN NO EVENT WILL NAUTILUS, INC. BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, INDIRECT OR ECONOMIC DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING, WITHOUT LIMITATION, PRODUCT LIABILITY, NEGLIGENCE OR OTHER
TORT) OR FOR ANY LOST REVENUE, PROFIT, DATA, PRIVACY OR FOR ANY PUNITIVE DAMAGES ARISING OUT OF OR RELATED TO THE USE OF THE FITNESS MACHINE EVEN IF
NAUTILUS, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION AND LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL
PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR INCIDENTAL TYPE DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU.
State Laws
This warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Expirations
If the warranty has expired, Nautilus, Inc. may assist with replacements or repairs to parts and labor, but there will be a charge for these services. Contact a Nautilus® office for
information on post-warranty parts and services. Nautilus® does not guarantee availability of spare parts after expiration of warranty period.
International Purchases
If you purchased your machine outside of the United States consult your local distributor or dealer for warranty coverage.
42
43
EN
Nautilus®
8004097.040115.D
Bowflex®
Schwinn®
Universal®