IN-LINE BRIX-MONITOR
CM-780N /CM-780N-Plus
In-Line Brix-Monitor
Specifications
CM-780N
CM -78 0 N
Cat.No.3561
CM-780N-Plus
CM -78 0 N-Plus
Cat.No.3562
Measurement scale
Brix (Automatic Temperature Compensation according to the sample liquid)
Measurement range
Brix 0.0 to 78.0%, temperature 0 to 100°C
Minimum indication
Brix 0.1%
Measurement accuracy
Measurement temperature
Brix ±0.1% (0.0 to 60.0% at 5 to 60°C)
Brix ±0.2% (For ages other than above)
Brix ±0.2%
Materials in contact with solution
Power supply
Recorder output : DC 4 to 20mA
RS-232C output
In-Line model for continuously measuring
concentration (Brix) of various liquid samples!
Prism : Artificial sapphire Prism stage : SUS316
DC24V (Power consumption 3VA)
Power input cable (1m)
Maximum pressure
Dimensions & weight
0.98MPa
IP64 dust-tight and splash resistant
Up to
100°C
16Χ17Χ11cm, 1.8kg (Main unit only)
Dimensions
Unit of length : mm
Weight : 1.8kg
ATAGO products comply with HACCP,
GMP, and GLP system standards.
All ATAGO refractometers are designed and manufactured in Japan.
Headquarters: 32-10, Honcho, Itabashi-ku, Tokyo 173-0001 Japan
TEL : 81-3-3964-6156 FAX : 81-3-3964-6137
overseas@atago.net http : //www.atago.net/
ISO9001
REGISTERED
* Specifications and appearance are subject to change without notice.
TEL : 1-425-637-2107 customerservice@atago-usa.com
TEL : 91-22-2833-8038 / 8076 customerservice@atago-india.com
TEL : 662-982-8718-9 customerservice@atago-thailand.com
TEL : 55 16 3916-6000 customerservice@atago-brasil.com
Αλεξανδρείας 13 - ΤΚ 143 42
Αθήνα
Τηλ. 210 - 2580160
Fax. 210 - 2580184
Μοναστηρίου 90 - ΤΚ 546 27
Θεσσαλονίκη
Τηλ.:2310500365-6
Fax:2310511608
TEL : 39 2 36557267 customerservice@atago-italia.com
TEL : 86 20-38106065 info@atago-china.com
Cat.No.3562
5 to 40°C
Accessory
International Protection Class
Cat.No.3561
5 to 100°C(Automatic Temperature Compensation)
Ambient temperature
Output
CM-780N
CM-780N-Plus
V.03 12032000PP Printed in Japan
Lightweight
Compact
Best buy
Simple-to-Use Compact
Compact In-Line
In-Line Model
Model
control
ATC
°C
CM-780N /CM-780N-Plus
Example for use
Features
auto
IN-LINE BRIX-MONITOR
The recorder output (4 to 20mA) and the RS232C output are incorporated to enable
automatic control by interlinking with external
equipment.
CIP
[Optional installation accessories are recommended for optimal performance.]
Safe for Clean-In-Place (CIP) processes (power
source must be turned off). (Up to 130°C)
Automatic Temperature Compensation (ATC)
allows the correct concentration (Brix) to be
displayed and output, even if the temperature of
the sample changes.
100 Automatic Temperature Compensation (ATC)
°C range of 5 to 100°C, allowing for high tempera-
The sample temperature can be displayed by
pressing ↓ key while measuring Brix (%).
R
eset
ture in-line samples to be measured accurately.
"Default" function restores factory settings.
tank
solution
Applications
Mixing, diluting and concentrating
processes at food manufacturing plants
circulating
pump
Industrial fluid
soy sauce, alcohol, etc.
cutting oil, lubricating oil, quenching oil, water-soluble
detergent, starch, sodium hydroxide, alkaline solution,
surfactant, amino acid, ammonia, ethanol, cesium
chloride, sodium carbonate, cupric sulfate, citric acid,
acetic acid, sodium glutamate, formalin, ethylene glycol,
propylene glycol, coating solution, sizing agent, fire
retardant, rust preventative, etc.
Concentration shifts between different products
Concentration control of various solutions
fruit juice, soft drinks, coffee, cocoa, alcoholic drinks,
tomato paste, sauce, ketchup, vinegar, pickled liquid, wort,
condensed milk, etc.
Fermenting processes
Concentration of waste liquids
waste liquid of sugar, alcohol, chemical, etc.
Concentration of impurities mixed in
hydrocarbon detergents or petrochemical
detergents
liquid sugar, fructose, glucose, syrup, albumen, edible oil,
vegetable oil, sugarcane/sugar beet, isopropyl alcohol,
dimethylformamide, polyvinyl alcohol, hydrogen peroxide,
methylene chloride, coolant and brine solutions, undiluted
solution of Chinese medicine, citrus oil glycerin, polymer,
gelatin, protein, lotion, etc.
Installing the CM-780N directly into main piping may result in a clogged flow. Regardless of installation method,
the flow of the sample solution should be in direct contact with the prism surface.
Options
Sample inlet unit
AC adapter
The AC adapter used to convert
AC100 - 240V to DC24V and to
supply power to the CM-780N.
IDF/ISO Clampunion
Stand
Stand for mounting the CM-780N
and the AC adapter.
(ferrule) 1S
Hose connector
12mmv
 CM -780N
 CM -780N-Plus
• CM-780N /CM-780N-Plus
IDF/ISO Clampunion
(ferrule) 2S
Compression Fitting
10mm
v
JIS Flange 1.25SΧ25A
 Sample inlet unit · outside diameter of hose connectors
12mmv [RE-6645]
Recorder output terminal
(DC4 to 20mA)
Prism
RS-232C output terminal
Power (DC24V) input terminal
display section
Prism stage
(2S ferrule)
detection section
AD-32 (AC100V)
AD-33 (AC110-120V)
AD-34 (AC220-240V)
 AC adapter · AD-32 [Cat.No.3527], AD-33 [Cat.No.3528],
AD-34 [Cat.No.3529]
 Sample inlet unit · Double Bite Joint (DBJ) 10mmv [RE-6651]
 Recorder output cable (5m) [RE-5635]
 Sample inlet unit · IDF/ISO Clampunion (ferrule) 1S [RE-6658]
 Recorder output cable (10m) [RE-5636]
 Sample inlet unit · IDF/ISO Clampunion (ferrule) 2S [RE-6659]
 Recorder output cable (15m) [RE-5638]
 Sample inlet unit · IDF/ISO Clampunion (ferrule) 1.5S [RE-6676]  Recorder output cable (20m) [RE-5639]
 Sample inlet unit · JIS Flange 1.25SΧ25A [RE-6667]
 RS-232C cable (15m) [RE-5647]
 Sample inlet unit · JIS Flange 50A [RE-6668]
 Stand [RE-8607]
(Stand for mounting the CM-780N and the AC adapter )
Download PDF
Similar pages
CM-780N CM-780N-Plus
α CM-80 CM-800 In-line
pal-alpha_en
pal-loop_en
qr-brix_en
pal-maple_en
dd-7_en
pan-1_en
11200152