GETTING STARTED EN USER MANUAL Connect the power adaptor to the clock, then to the power supply. 1 2 Insert 3 AAA size batteries into the battery compartment for backup power (for clock functions only). Follow the correct polarity (+/-) as indicated. In normal time mode, press and hold [ALARM] button for 3 seconds until the Hour digit flashes. 2 Press [+] or [-] button to set the desired value. Press and hold to quickly adjust the values. 3 Press [ALARM] button again and the Minute digit flashes. 4 Press [+] or [-] button to adjust its value. 5 Press [ALARM] button again to save and exit the setting. The clock will automatically exit after 30 seconds if no buttons are pressed. the clock to the power supply, press the [RESET] button. Power Battery Operating range DC 5V, 2.5 A 3 x AAA size 1.5V batteries -5°C ~ 50°C/23°F ~ 122°F Temperature resolution 0.1°C/0.1°F Humidity resolution Dimensions (W x D x H) 1% 9.4 x 3.4 x 2 in 24 x 8.6 x 5.2cm TIME & CALENDAR SETTING In normal time mode, press and hold the [TIME] button for 3 seconds to enter setup mode. 2 Press the [+] or [-] button to set the desired calendar & time values. Press and hold down the buttons to quicky adjust the values. 3 Press the [TIME] button to advance the setting items in this sequence: BEFORE FIRST USE Please read the instruction manual carefully and keep it for future reference. This information will help you to familiarize yourself with your new LED Mood Clock with 2 USB Fast-Charge Ports. Year The product should only be used as described within these instructions. Unauthorized repairs, modifications or changes to the product are prohibited. This product is intended for home use only. Month UNIT APPEARANCE Date 12/24 hour format 2 Hour 8 9 10 11 Language Press [TIME] button to save and exit the setup mode. The clock will automatically exit after 30 seconds if no buttons are pressed. NOTE USING ALARM & SNOOZE FUNCTION 15 Set the alarm time as described in the above section. 2 Press the red [ALARM ON/OFF] button to enable or disable the alarm. The red [ALARM ON/OFF] button will protrude from the top of the clock and the alarm icon “ ” will appear on the LCD when the alarm is on. Alarm is in ON position 3 When the alarm is sounding, press the [SNOOZE/LIGHT] button to activate the snooze mode. The alarm icon “ ” on the display will flash to indicate that the snooze function has been activated. 4 To turn off the alarm and snooze functions completely, press the [ALARM ON/OFF] button. TEMPERATURE & HUMIDITY DISPLAY Press the [°C/°F] button to select the temperature format: °C or °F. 2 The temperature and humidity will display “Hi/Lo/—” for the conditions noted in the following chart: Setting order of the 5 selectable languages: TEMPERATURE [ALARM ON/OFF] button 9 [SNOOZE/LIGHT] button 10 [MANUAL] button 3 LCD display 11 [CUSTOM] button 4 USB charge ports (2) 12 Power supply socket connector 5 [TIME] button 13 [°C/°F] button 6 [ALARM] button 14 [RESET] button 7 [-] button 15 Battery compartment 8 [+] button 16 [AUTO/LO/HI] slide switch [AUTO] button DE (German) ES (Spanish) IT (Italian) Press the [CUSTOM] button to select 1 of 256 colors. Press and hold to quickly cycle through the colors. DIMMER OPERATION Sliding the [AUTO/LO/HI] switch to... 1 “AUTO” position: the illumination of the backlight will automatically adjust its brightness based on the ambient room lighting (dims in low light and brightens in bright light). 2 “LO” position: the illumination of the backlight will be dim. 3 “HI” position: the illumination of the backlight will be bright. NOTE Backlight color change functions are only available when the DC power adaptor is used (not on backup battery power). The AAA batteries are for clock backup purposes only (see note below). Please replace the batteries periodically to ensure that backup power is available. If the clock is disconnected from the power supply, it will continue to function as normal. When operating on battery power, the display will be in power conservation mode and the digits will be very dim. You can press the [SNOOZE/LIGHT] button to temporarily light up the backlight for 5 seconds. 1 FR (French) 1 Cyan BACKUP BATTERIES • If no buttons are pressed after 1 minute, the alarm will automatically shut off. The alarm will resume to sound at the same time the following day. • When the snooze mode is activated, the alarm will sound again after 5 minutes. You can use the snooze function a maximum of 4 times consecutively. 16 2 Yellow 3 1 HUMIDITY 14 Red Purple GB (English) 13 White Blue Minute 4 12 Press the [MANUAL] button to select 1 of 8 preset colors: Set alarm minute Second 7 2 Green 3 6 Press the [AUTO] button to enter the DEMO mode and the LCD backlight color will slowly cycle through all 256 colors. Press the button again at any time to stop the backlight color. Set alarm hour NOTE 4 5 1 Orange 1 Normal mode 1 BACKLIGHT COLOR CHANGING OPERATION: 1 NOTE If no display appears on the LCD display after connecting CL030063 LED Mood Clock with 2 USB Fast-Charge Ports COLORFUL BACKLIGHT DISPLAY ALARM TIME SETTING CONDITION DISPLAY HUMIDITY < 20% LO HUMIDITY > 90% HI TEMPERATURE < -40°C/-40°F LO TEMPERATURE > 60°C/140°F HI TEMPERATURE < 0°C/32°F OR > 70°C/158°F — USB CHARGE PORTS 1 If you are using 1 USB port, the device will be charged with a 2.1 A maximum voltage. 2 If you are using 2 USB ports, the devices will be charged with a 1.1 A maximum voltage. NOTE The USB ports will not work on backup battery power. The clock must be connected to the DC power adaptor and connected to a power supply in order to be able to use the charging function. SAFETY & PRECAUTIONS • This unit is intended for indoor use only. • Do not subject the unit to excessive force or shock. • Do not expose the unit to extreme temperatures, direct sunlight, dust or moist environments. • Do not cover the ventilation holes with any items. • Do not immerse the unit in water. If you spill liquid over it, dry immediately. • Avoid contact with any abrasive or corrosive materials. • Do not dispose of this unit in a fire as it may explode. • Do not open the inner back case or tamper with any of the components of the unit. • Please dispose of used unit or batteries in an ecologically safe manner. • The temperature and humidity sensor is located in the power supply socket connector that protrudes from the back of the clock. Ensure that it is kept clear of obstructions.