Security Safety Precautions Limitation of Liability Key Functions

ƒƒ To protect your mobile phone from illegal use, take the security
measures as follows:
¾¾ Set PIN codes of the SIM card.
¾¾ Set handset lock code.
¾¾ Set call restrictions.
Version No. : R1.0
Edition Time : 20110222
Manual No. : 079584502601
Safety Precautions
This section includes some important information on safe and efficient
operation. Please read this information before using the phone.
Operational Precautions
ƒƒ Please use your phone properly. When making or receiving a call,
please hold your phone as holding a wireline telephone. Make sure
that the phone is at least one inch (about two point five centimeters)
from your body when transmitting.
ƒƒ Do not touch the antenna when the phone is in use. Touching the
antenna area affects call quality and may cause the phone to operate
at a higher power level than needed.
ƒƒ Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when watching television or
playing video games. If you have experienced seizures or blackouts,
or if you have a family history of such occurrences, please consult
your doctor before playing video games on your phone or enabling a
flashing-light feature on your phone. (The flashing-light feature is not
available on all products.)
ƒƒ Keep the phone out of the reach of small children. The phone may
cause injury if used as a toy.
Precautions for Potentially Explosive Atmospheres
Limitation of Liability
ƒƒ Switch off your phone prior to entering any area with potentially
explosive atmospheres, such as fueling areas, fuel or chemical
transfer or storage facilities.
ƒƒ Do not remove, install, or charge batteries in such areas. Spark in
a potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
ƒƒ To avoid possible interference with blasting operations, switch off
your phone when you are near electrical blasting caps, in a blasting
area, or in areas posted “Turn off electronic devices.” Obey all signs
and instructions.
ZTE shall not be liable for any loss of profits or indirect, special, incidental
or consequential damages resulting from or arising out of or in connection
with using this product, whether or not ZTE had been advised, knew
or should have known the possibility of such damages. The user should
refer to the enclosed warranty card for full warranty and service information.
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE
The manual is published by ZTE Corporation. We reserve the right to
make modifications on print errors or update specifications without prior
Precautions While Driving
Precautions for Electronic Devices
ƒƒ Please pay attention to the traffic safety. Check the laws and regulations
on the use of your phone in the area where you drive. Always obey
ƒƒ Use hands-free function of the phone, if available.
ƒ ƒ Pull off the road and park before making or answering a call if
conditions require.
ƒƒ Some electronic devices are susceptible to electromagnetic interference
sent by mobile phone if inadequately shielded, such as electronic
system of vehicles. Please consult the manufacturer of the device
before using the phone if necessary.
ƒƒ When using your phone near pacemakers, please always keep the
phone more than eight inches (about twenty centimeters) from the
pacemaker when the phone is switched on. Do not carry the phone in
the breast pocket. Use the ear opposite the pacemaker to minimize
the potential for interference. Switch off the phone immediately if
ƒƒ Some phones may interfere with some hearing aids. In the event of
such interference, you may consult your hearing aids manufacturer
to discuss alternatives.
ƒƒ If you use any other personal medical device, please consult the
manufacturer of your device to determine if it is adequately shielded
from RF(radio frequency) energy.
ƒƒ In those facilities with special demand, such as hospital or health
care facilities, please pay attention to the restriction on the use of
mobile phone. Switch off your phone if required.
Mobile Phone
ƒƒ Please use original accessories or accessories approved by the phone
manufacturer. Using any unauthorized accessories may affect your
mobile phone’s performance, damage your phone or even cause
danger to your body and violate related local regulations about telecom
ƒƒ Do not disassemble or refit the battery. Otherwise, it will cause liquid
leakage, overheating, explosion and ignition of the battery.
ƒƒ Please store the battery in a cool dry place if you don’t use it for a
long period.
ƒƒ The battery can be recharged for hundreds of times, but it will eventually
wear out. When the operating time (talk time and standby time) is
noticeably shorter than normal, it is time to replace it with a new one.
ƒƒ Please stop using the charger and battery when they are damaged
or show evidence of aging.
ƒƒ Return the worn-out battery to the provider or dispose of it in accordance
with environment regulations. Do not dispose of it in household rubbish.
ƒƒ Please use original batteries or batteries approved by the phone
manufacturer. Using any unauthorized battery may affect your handset
performance or may cause danger of explosion, etc.
Precautions for Medical Devices and Facilities
S213使用手册(斯威士兰 MTN).indd
ƒƒ Turn off your phone before you clean it. Use a damp or anti-static
cloth to clean the phone. Do not use a dry cloth or electrostatically
charged cloth. Do not use chemical or abrasive cleaners as these
could damage the phone.
ƒƒ As your mobile phone can produce electromagnetic field, do not place
it near magnetic items such as computer disks.
ƒƒ Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference.
ƒƒ Do not expose your mobile phone to direct sunlight or store it in hot
areas. High temperatures can shorten the life of electronic devices.
ƒƒ Keep your phone dry. Any liquid may damage your phone.
ƒƒ Do not drop, knock or harshly treat the phone. Rough handling can
break internal circuit boards.
ƒƒ Do not connect the phone with any incompatible enhancement.
ƒƒ Do not attempt to disassemble the mobile phone or battery.
ƒƒ Do not store the phone with flammable or explosive articles.
ƒƒ Do not charge the mobile phone without battery.
Warning: If the battery is damaged, do not discharge it. If the leakage
does come into contact with the eyes or skin, wash thoroughly in clean
water and consult a doctor.
Note: The pictures and icons shown in the manual are just schematic
drawings for function demonstration. If they are inconsistent with your
handset, please take your handset as the standard. If the inconsistency
exits in the manual because of the handset function updating, please
refer to the follow-up public information from ZTE CORPORATION.
Performs the function indicated at the left bottom of
Left soft key
the screen.
Performs the function indicated at the right bottom
Right soft key
of the screen.
Center key
Press to confirm actions and make selections.
These keys (UP, DOWN, LEFT and RIGHT) allow
for navigation through menu options and quick
Navigation keys
accessing to some function menus.
Press to dial a phone number or answer a call, or
Send key
view the call history.
Press to exit to the standby mode.
End/Power key
Hold to switch on/off the phone.
Alpha numeric
Press to enter characters 0-9 and the alphabets
from a-z.
Note: In this User Manual, “press a key” means to press the key and
release it immediately, while “hold a key” means to press the key for at
least two seconds and then release it.
Locking and Unlocking the Keypad
Signal strength
Call diverting
Keypad locked
ƒƒ Safety airbag, brake, speed control system and oil eject system shouldn’t
be affected by wireless transmission. If you do meet problems above,
please contact your automobile provider. Do not place your phone in the
area over an airbag or in the airbag deployment area. Airbags inflate with
great force. If a phone is placed in the airbag deployment area and the
airbag inflates, the phone may be propelled with great force and cause
serious injury to occupants of the vehicle.
ƒƒ Please turn off your mobile phone at a refueling point, and the same
to the place where the use of two-way radio is prohibited.
Battery status
Alarm clock set
Aircraft Safety
ƒƒ Please turn off your mobile phone before the airplane takes off. In
order to protect airplane’s communication system from interference,
it is forbidden to use mobile phone in flight. Safety regulations require
you to have permission from a crew member to use your phone while
the plane is on the ground.
ƒƒ If the mobile phone has the function of automatic timing power-on,
please check your alarm setting to make sure that your phone will
not be automatically turned on during flight.
Missed call
Insert the SIM card as follows:
yy Make sure that the phone is switched off and the charger is
disconnected from the phone.
yy Turn the phone over and remove the battery cover.
yy Remove the battery if it is already installed.
yy Hold your SIM card with the cut corner oriented as shown and then
slide it into the card holder with the gold-coloured contacts facing
yy Replace the battery first.
yy Replace the battery cover.
Send key
End/Power key
The lithium ion battery of the mobile phone can be immediately used
after unpacking.
Installing the battery
Alpha numeric keys
* key
# key
Charger /headset
Battery Use
ƒƒ Do not short-circuit the battery, as this can cause the unit to overheat
or ignite.
ƒƒ Do not store battery in hot areas or throw it into fire. Otherwise, it will
cause explosion.
Pull up the battery from here
Inserting the SIM Card
New SMS, message full
when blinking
4-Way Navigation
keys and Center key
Removing the battery
111 Make sure that your mobile phone is switched off.
222 Remove the battery cover.
333 Pull the battery up and remove it from the mobile phone.
Safety and General Use in Vehicles
Left/Right soft key
Replace the battery cover
Remove the battery cover
Interface Icons
Push down the battery
In the standby mode, press the Left soft key and then press the * key
within two seconds to lock the keypad. The unlock method is the same.
Locking the keypad can prevent unintentional operations on it. You can
answer an incoming call with the regular operation when the keypad is
Key Functions
Remove the battery cover
111 Pull the battery cover from the notch on the top edge and remove
the cover.
222 Insert the battery by aligning the gold-coloured contacts with the
contacts in the battery slot.
333 Push down the upper section of the battery until it clicks into place.
444 Replace the battery cover and close it gently until you hear a click.
Insert the SIM card
SIM card (Subscriber Identity Module) is a micro-chip that holds your
personal information such as names and phone numbers. Your phone
won’t work without it. If you already have contacts on your SIM card,
they can be transferred in most cases.
- 10 -
Inserting the Memory Card
You can use a memory card to expand the storage of the phone. You
can store or copy files such as pictures, music, and so on.
Do not take out the card or switch off the phone while transmitting or
storing data, which may cause data loss or damage to the phone or the
Insert the Memory card as follows:
yy Open the battery cover and remove the battery. Insert the card with
the metal contacts facing down until it clicks to the right position.
Insert the Memory card
Charging the Battery
Your phone is powered by a rechargeable battery. For maximum battery
performance, it is recommended that you first use up the battery power
and then charge it completely. A new battery’s full performance is
achieved only after three complete charge and discharge cycles.
yy Connect your travel adapter to the bottom of your mobile phone as
shown in the diagram.
yy Connect the other end of the travel adapter to the mains socket.
yy When you charge the battery, the battery charging indicator appears.
yy When the battery is fully charged, disconnect the charger.
- 11 -
yy Input words: In eZi ABC/eZi abc mode, input any letter with a single
key press. Press each key only once for every letter. The word
changes after each key stroke. Predictive text input is based on a
built-in dictionary. When you have finished writing the word and it is
correct, confirm it by pressing the Center key or 0 key. If the word
is incorrect, press the Left/Right Navigation keys to view other
matching words found in the dictionary.
yy Input digits: In 123 mode, press digit key once to input a digit. In eZi
ABC/eZi abc mode, press the digit key, and select the number by
pressing the Navigation keys. You cannot input 0 in eZi ABC/eZi
abc mode. In ABC/abc mode, constantly press the digit key until the
number appears.
yy Input symbol: Press the * key to enter the symbol mode, select the
required symbol (common symbols) by pressing the Navigation keys
and then press the Left soft key or Center key to confirm it. In eZi
ABC/eZi abc mode, press the 1 key, and select the required symbol
(common symbols) by pressing the Navigation keys. In ABC/abc
mode, constantly press the 1 key until the required symbol (common
symbols) appears.
yy Input space: Press the 0 key to input space. It does not work in 123
yy Delete character: Press the Right soft key to clear a character. Hold
the Right soft key to delete all characters and clear the display.
yy Move cursor to left or right: Among the text, press the Left/Right
navigation keys to move the cursor to left or right.
How to add contact to the Phonebook
Powering your Phone On/Off
Make sure that your SIM card is in your mobile phone and that the battery
is charged.
Hold the End/Power key to power on/off the phone. The phone will
automatically search for the network.
Turning the Torch On/Off
In the standby mode, hold the * key to turn on or off the torch.
Writing Text
yy Change input mode: Press the # key to change the input mode (input
modes: eZi ABC, eZi abc, ABC, abc,Abc ,123).
yy Input letters: In ABC/abc/Abc mode, constantly press the corresponding
letter key till the letter appears.In eZi ABC/eZi abc mode, press the
corresponding letter key ,then choose the letter you want by pressing
Navigation keys,press the Left soft key or Center key to confirm it.
- 12 -
S213使用手册(斯威士兰 MTN).indd
How to receive a message
Upon receiving a message, the mobile phone will alert you with a ringtone,
prompt, or a new message icon.
111 Press Read to open the new message. You can also go to Inbox to
read the message.
222 Use the Up/Down Navigation keys to view the message.
333 While the message is open, press Options to reply, delete, or
forward the message. You can also call back the sender or save the
sender’s number.
You can also receive broadcast messages by using this mobile phone.
Go to Menu→Messages→Voicemail server, you can call the
voicemail or edit the voicemail name and number.
How to set User profiles
Go to Menu→User profiles. You can select Options→Activate to
activate a profile. Or you can select Options→Customize to edit a
Note: The Silent mode can be only selected On or Off. And the Headset
mode can only be activated with the headset connected.
How to view Call history
There are some numbers that you may want to call again and again, so
it makes sense to add these numbers to your Phonebook. You can then
access these numbers quickly and easily.
yy Go to Menu→Phonebook→Options→Add new contact.
yy Select to save the number to SIM or phone.
Go to Menu→Call center→Call history.
Dialed calls, Received calls and Missed calls are saved in Call history.
If the records are full, the earliest saved records will be deleted
Also, you can view call timers, call cost, SMS counter, and GPRS
counter in Call history. (Call cost function need network supporting.)
- 13 -
- 15 -
yy Edit the information and save it.
yy You can also save a number right after you’ve made or received
a phone call or a message from someone who is not yet in your
Phonebook list.
yy To delete someone from your Phonebook list, first select the name,
then select Options→Delete.
yy To view the memory status and so on, go to Options→Phonebook
Go to Menu→Phonebook→Options→Caller groups. You can sort
the contacts to different groups. You can also set the groups.
333 When you finish writing an SMS, select Options to send or save
the message.
How to make and receive calls
The most basic way to make a call is to input the number in the standby
mode and press the Send key. You can also make a call from the
Phonebook list.
yy To call someone: Go to Menu→Phonebook. Use the Up/Down
Navigation keys to find the name of the person you want to call.
You can also type in the first letter of the name of the person you
want to call to find the right name, and press the Send key.
yy To receive a call, press the Left soft key or the Send key.
yy To end a call, press the End/Power key.
yy To reject a call, press the End/Power key.
Make sure that you are in an area with sufficient coverage to make calls.
The strength of the network signal is indicated on the Status Bar of the
How to send messages
You can use your mobile phone to send and receive messages.
111 Go to Menu→Messages→SMS→Write message.
222 Write your message. For more information on input method, see
section ‘Writing text’. When you write an SMS, press Options→Send
to, and edit the recipient.
- 14 -
yy Tasks
You can add tasks in this: Set Date, Call and Anniversary tasks.
yy Alarm
You can view, and edit the alarm clocks settings. You can also enable
or disable the alarms. By pressing Edit, you can set the corresponding
features of the alarm according to instructions.
yy World clock
You can view the time in different cities.
yy Calculator
You can perform simple calculations. You can add, subtract, multiply
or divide, and select M+, M-, MC, and MR to perform relevant
operations. Press # key to show decimal point.
Note: This calculator has limited accuracy and rounding errors may
occur especially in long division.
yy Stopwatch
Use it to record the time.
File manager
Go to Menu→File manager. You can check all the folders in the phone
or memory card, create new ones or rename, delete, or sort, etc. The
files you download from the internet will be stored in these folders.
Note: When you select Format, the data will be lost, so please be
careful with this function.
- 17 -
Go to Menu→Multimedia→Games.
In Games, you can choose your favorite game to play. In
Games→Games settings, you can set the games.
Note: You may be required to input the phone password in some of
the security settings interfaces. The default password is 1234. Go to
Security settings→Change password→Phone password to change
the phone password.
Go to Menu→Organizer.
yy Calendar
Enter Calendar, the calendar of the current month will be displayed
on the screen and the current date will be marked by a background
box in a special colour.
- 16 -
If you encounter problems while using the phone, or if it performs
abnormally, you can refer to the chart below. If your particular problem
cannot be resolved using the information in the chart, contact the
dealer where you purchased the phone.
Go to Menu→Multimedia→Audio player. You can play the audio, which
is put in the ..\My Music folder in your phone or the memory card.
In List→Options, you can refresh your playlist, set storage, or make
personal settings.
Go to Menu→Call center→Call settings.
You can set call waiting, call divert and call barring.
In Advanced settings, you can set blacklist, auto redial, call time display,
call time reminder and auto quick end.
You can adjust various settings of your phone. Go to Menu→Settings.
yy Phone settings: Set time and date and schedule power on/off, set
pref. input methods, display, greeting text, flight mode, Auto update
of date and time , LCD backlight.
yy Network settings: Set to automatically or manually select network,
and set the preferred networks and GPRS connection.
yy Security settings: Set security features to protect you from
unauthorized use of your phone and SIM card.
yy Connectivity: View connection activities and set data account.
yy Restore factory settings: Enter the phone password to restore to the
factory settings. Some personal information might be lost if you use
this function, so be careful.
Questions & Answers
How to play music
How to configure Call settings
How to set your phone
yy WAP
In WAP, select Homepage to go into your homepage.
Select Bookmarks to view the list of saved pages.
Select Recent pages to view the list of pages you recently visited.
Select Input address to go to a page by directly inputting the address.
Go to Service inbox to view the service messages.
Go to Settings→Profiles to select a profile or add a new one.
Go to Settings→Browser options. Select Timeout to set timeout. If
the timeout period elapsed prior to completion of the operation or the
server is not responding, it will show “Connection Failed”. During the
timeout period, it will keep trying to connect until expired. Select Show
images to set whether or not to show the images. Select whether or
not to enable Cache and Cookies.
Go to Settings→Service message settings to set the service
message receiving.
Go to Settings→Clear cache to clear cache.
Go to Settings→Clear cookies to clear cookies.
Go to Menu→Multimedia→FM radio.
With the radio, you can search for radio channels, listen to them, and
save them on your device. Note that the quality of the radio broadcast
depends on the coverage of the radio station in that particular area. In
the FM radio interface, you can press the Up/Down Navigation keys
to adjust volume, press the Left/Right Navigation keys to tune the
frequency, and press the Center key to pause. Select Options to enter
the submenu:
yy Channel list: Edit up to 9 channels.
yy Manual input: Manually input a channel.
yy Auto search: Automatically searches for channels.
yy Settings: You can turn on/off Background play,and you can turn on
Loudspeaker when headset is inserted.
How to use Services
Go to Menu→Services. Services allows you to view internet content.
In Services you can use the STK and WAP.
yy STK
SIM card Toolkit (STK) services are value-added services provided by
your network provider.
Your mobile phone supports STK service, but if your SIM card and
network provider do not support the service, these functions can’t be
- 18 -
Possible causes
The network signal is
too weak at your current
location, for example, in
a basement or near a tall
building, because wireless
transmissions can not
effectively reach it.
The network is busy at the
Poor reception
current time (for example,
during peak times, there
may be too much network
traffic to handle additional
You are too far away from
a base station for your
service provider.
Echo or noise
Unable to
select certain
Possible solution
Contact the dealer.
- 21 -
Possible solution
Move to a location where
the network signal can be
properly received.
Avoid using the phone at
such times, or try again
after waiting a short time.
You can request a service
area map from your
service provider.
Press End key and
Poor network trunk quality dial again. You may be
on the part of your service switched to a betterprovider.
quality network trunk or
phone line.
Press End key and
dial again. You may be
Poor local telephone line
switched to a betterquality.
quality network trunk or
phone line.
Your service provider
does not support these
Contact your service
features, or you have not
applied for services that
provide these features.
- 20 -
Possible causes
The battery or battery
charger is damaged.
The phone’s temperature
is below 0°C or higher
than 45 °C.
Adjust the battery charging
environment to avoid
extremes of temperature.
Check all connectors to
Poor contact between the
make sure all connections
battery and charger.
have been properly made.
The standby time is related
to your service provider
system configuration. The If you are located in an
area where signaling is
same phone used with
different service providers’ weak, temporarily power
off the phone.
systems will not provide
exactly the same length of
standby time.
The battery is depleted.
In high-temperature
Use a new battery.
environments, battery life
standby time
will be shortened.
If you are not able to
connect to the network,
the phone will continue
Change your location to
to send out signals as
one where the network is
it attempts to locate a
accessible, or temporarily
base station. Doing so
turn off your phone.
consumes battery power
and will consequently
shorten standby time.
Cannot switch Battery power has been
Recharge the phone’s
your phone on depleted.
Battery not
- 19 -
FM radio
Possible causes
Possible solution
Take the USIM card to
USIM card malfunction or
your service provider for
USIM card
USIM card inserted
Insert the USIM card
Debris on the USIM card Use a soft, dry cloth to clean
the USIM card contacts.
Contact your service
USIM card invalid.
You are not within the
Check the service area
Unable to
with your service provider.
connect to the network’s service area.
Move to an open space, or
Poor signal.
if you are inside a building,
move closer to a window.
Go to Call center > Call
Cannot answer You have activated the
settings > Call barring, and
incoming calls Call barring feature.
then select Cancel all.
Go to Call center > Call
You have activated the
settings > Call barring,
Call barring feature.
You cannot
and then select Cancel all.
make outgoing
Go to Settings > Security
You have activated the
settings > Fixed dial and
Fixed dial feature.
select Off.
Contact your service
provider. If the service
You have entered an
provider provides the
PIN Code
incorrect PIN code three
USIM card’s PUK code,
consecutive times.
use the PUK code to
unlock the USIM card.
Unable to enter
The Phonebook’s memory Delete unnecessary data
information into
is already full.
from the contacts.
the Phonebook
- 22 -