HPE ProLiant BL420c Gen8 Server Blade

QuickSpecs
HPE ProLiant BL420c Gen8 Server Blade
Overview
HPE ProLiant BL420c Gen8 Server Blade
Redefining the term "entry-level" in the blade market, the BL420c Gen8 provides breakthrough server blade economics for essential
enterprise workloads.
1. Access panel
2.
3.
4.
5.
6.
7. Up to two (2) Intel® Xeon® E5-2400v2 or E5-2400 series
processors
Cache module connector
8. Internal USB 2.0 connector and Trusted Platform Module
(TPM) connectors
Two (2) PCIe 3.0 mezzanine I/O expansion slots
9. HPE c-Class Blade SUV (Serial, USB, VGA) connector
FlexibleLOM Adapter
10. Two (2) small form factor (SFF) hot-plug drive bays
MicroSDHC card connector
11. SAS controller
FlexibleLOM connectors (2) supporting one (1) FlexibleLOM 12. Twelve (12) DDR3 DIMM memory slots (6 per processor)
Adapter
What's New
•
Support for HPE 1.6TB and 800GB 12G SAS Value Endurance SFF 2.5in SC Enterprise Value Solid State Drives
Page 1
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
NOTE: This document covers the HPE ProLiant BL420c Gen8 server blade only. For information on HPE BladeSystems c-Class
Platinum Enclosures and HPE BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HPE BladeSystem c-Class Enclosures QuickSpecs:
• HPE BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12790_na/12790_na.html
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades
are supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12810_na/12810_na.html
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For proper BladeSystem operation, the minimum required versions of HPE Onboard Administrator and HPE Virtual
Connect are required and available via the HPE Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For optimal cooling and system performance the BL420c Gen8 requires the c7000 enclosure to be configured with 10
fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processor
E5-2400 v2 series Processors
One of the following Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) Processor
depending on Model
Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) Processor
Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) Processor
E5-2400 series Processors
Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) Processor
Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) Processor
Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) Processor
Page 2
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
NOTE: In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different processor models is not
supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the
E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed
memory can operate. Please see the see the "Memory" section later in this document.
Cache Memory
25MB shared L3 cache
One of the following NOTE: For Ten-core processors.
depending on Model 20MB shared L3 cache
NOTE: For Eight-core processors.
15MB shared L3 cache
NOTE: For Six-core processors.
10MB shared L3 cache
NOTE: For Quad-core processors.
Chipset
Intel® C600 Series Chipset
Intel® E5-2400 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to two (2) processors
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2400 to E5-2400 v2. Please contact
Hewlett Packard Enterprise Technology Sales (http://www.hp.com/support), your local Hewlett
Packard Enterprise Re-seller, or reference the following Customer Advisory: ProLiant ServersInstructions for Upgrading an HPE ProLiant Gen8 Server from an Intel Xeon Processor E5-2400 to an
Intel Xeon Processor E5-2400v2, regarding critical details before upgrading. An explanation of
requirements and limitations are provided.
On System
Management
Chipset
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Memory Lockstep Mode
Memory
Type
One of the following
depending on Model
Standard (Pre-
HPE SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM), or Unbuffered ECC (UDIMM)
12GB (3 x 4GB) DDR3 1333MHz RDIMMs at 1.35V
Page 3
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
configured Models) 24GB (6 x 4GB) DDR3 1600MHz RDIMMs at 1.5V
Maximum (LRDIMM) 384GB (12 x 32GB) up to 1600MHz at 1.5V
Maximum (RDIMM) 192GB (12 x 16GB) up to 1600MHz at 1.5V
192GB (12 x 16GB) up to 1333MHz at 1.35V
Maximum (UDIMM) 96GB (12 x 8GB) up to 1600MHz at 1.5V
96GB (12 x 8GB) up to 1333MHz at 1.35V
NOTE: HPE memory from previous generation servers are not qualified or warranted with this server.
HPE SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please see the HPE
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: The Intel Xeon E5-2400 Processor Family cannot be configured with the new 1866MHz HPE
Smart Memory or the new 1600MHz Low Voltage (1.35v) HPE Smart Memory.
NOTE: Depending on the memory configuration and processor model, 1866MHz, 1600MHz and 1333MHz
memory may operate at a lower speed. Please see the see the "Memory" section later in this document
and the Online Memory Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator.
NOTE: The Intel Xeon E5-2400v2 processor architecture supports memory speeds up to 1600MHz.
1866MHz HPE Smart Memory will run at 1600MHz.
Network Controller NOTE: Supports one of the following FlexibleLOMs and iLO Management.
One of the following One (1) HPE FlexFabric 10Gb 2-port 554FLB FlexibleLOM
depending on Model NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot,
and autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HPE BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HPE Virtual Connect FlexFabric module. Fibre
Channel over Ethernet (FCoE) is supported with the HPE 10GbE Pass-Thru Module, HPE 6120XG Blade
Switch with the CEE license installed, HPE Cisco B22HPE Fabric Extender and HPE Cisco B22HPE Fabric
Extender with 16 FET for BladeSystem c-Class. Learn more at http://www.hp.com/go/virtualconnect.
One (1) HPE Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HPE Ethernet 10Gb 2-port 560FLB FlexibleLOM
One (1) HPE Ethernet 1Gb 2-port 361FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HPE iLO 4 On System Management Chipset
One (1) 10/100 Mbps port for the HPE iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps.
Expansion Slots
Two (2) I/O expansion mezzanine slots:
• x8 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port
cards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port
cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to
Page 4
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
Mezzanine card options include:
• Dual-port 10Gb FlexFabric,10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet server adapter
mezzanine options for additional network ports
• Dual-port 8Gb Fibre Channel HBA for SAN connectivity
• QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
• I/O accelerator mezzanine options for high transaction rate local storage
HPE Server ROM
HPE ROM (read only memory) is now digitally signed using Hewlett Packard Enterprise's Corporate Signing
Service. This signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of
hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these
configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HPE’s ProLiant ROM is used to configure the following:
• Processor and chipset status registers
• System memory, memory map, and memory initialization
• System hardware configuration (integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to The Hewlett Packard Enterprise RBSU (ROM based setup
utility) user guide: http://www.hp.com/support/rbsu
Storage Controller
One of the following One (1) HPE Smart Array P220i Controller with 512MB FBWC, (RAID 0 and 1)
depending on Model NOTE: Upgradeable firmware with recovery ROM.
NOTE: The HPE Smart Array P220i supports two (2) small form factor (SFF) hot
plug drive bays.
One (1) HPE Dynamic Smart Array B320i Controller (SATA RAID 0 and 1 standard;
SAS RAID 0 and 1 standard on preconfigured models and optional with SAS License
Key upgrade on Configure-to-Order models)
NOTE: HPE Dynamic Smart Array B320i supports two (2) small form factor (SFF)
hot plug drive bays.
NOTE: The server supports up to a combined total of two (2) FBWC supercap
options.
Available Options: Smart Array Advanced Pack Software for enhanced performance,
reliability, availability, and security of system data, SAS License Key (RAID 0 and 1) and
HPE 512MB FBWC for B-Series Smart Array.
Maximum Internal
Storage
Hot Plug SFF SAS
Hot Plug SFF SATA
Hot Plug SFF SAS SSD
Hot Plug SFF SATA SSD
4.0TB
4.0TB
3.2TB
3.2TB
2 x 2.0TB
2 x 2.0TB
2 x 1.6TB
2 x 1.6TB
Page 5
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
NOTE: The ProLiant BL420c Gen8 server includes the new HPE hot plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from
previous generation servers are not compatible with the ProLiant BL420c Gen8 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 2.0 Port
One (1) internal USB 2.0 connector for USB flash media drive keys
NOTE: The above options are for integrated hypervisor virtualization environments needing a low cost
boot solution with the highest performance and reliability.
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 2.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards dependent on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
Operating Systems
and Virtualization
Software Support
for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
NOTE: For more information on the HPE Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit our
Support Matrix at: http://www.hp.com/info/ossupport and our driver download page
http://www.hp.com/support/BL420cGen8
Enclosures
Hewlett Packard Enterprise offers two different c-Class server blade enclosures to meet your individual needs:
• The HPE BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant
BL420c Gen8 servers plugged vertically.
• The HPE BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HPE ProLiant
BL420c Gen8 servers plugged horizontally.
• Server blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator
modules are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200 video standard
• 1280 x 1024 (32 bpp)
• 1920 x 1200 (16 bpp)
Page 6
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HPE ProLiant BL420c Gen8 is a half-height server blade that plugs into the HPE BladeSystem c3000 and
c7000 enclosures.
On System
Management
HPE iLO
HPE iLO Management Engine is a comprehensive set of embedded management
Management Engine features supporting the complete lifecycle of the server, from initial deployment,
through ongoing management, to service alerting and remote support. HPE iLO
Management Engine comes standard on all HPE ProLiant Gen8 servers. The HPE iLO
Management Engine portfolio includes:
• HPE iLO: The HPE iLO (Integrated Lights-Out) management processor is the
core foundation for the HPE iLO Management Engine.
• HPE Agentless Management: Provides built in server health monitoring and
alerting capability without OS agents, that starts working the moment a power
cord and an Ethernet cable are connected.
• HPE Active Health System Always on, continuous monitoring for increased
stability and shorter downtimes; 100% configuration history; Health and
service alerts and easy export and upload to Service and Support.
• HPE Intelligent Provisioning: lets customers provision and configure a
single server without any separate media. No more SmartStart CDs or firmware
DVD are needed.
− To start Intelligent Provisioning:
 Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
 Please go to the Intelligent Provisioning website at
http://www.hp.com/go/intelligentprovisioning for
additional information and to view usage videos.
 Use the Service Pack for ProLiant (SPP) at
http://www.hp.com/go/spp to get firmware and software
updates.
• HPE iLO Mobile App: Enables the ability to access, deploy, and manage your
server anytime from anywhere from select smartphones and mobile devices.
For additional information please visit:
http://www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HPE iLO
Management Engine technologies whitepaper
HPE Insight
management
software
HPE Service Pack for HPE Service Pack for ProLiant (SPP) and HPE Smart Update Manager (HPE SUM)
ProLiant (SPP)
provide a comprehensive approach to firmware and system software maintenance.
Together they provide better operating stability and ensure maximum uptime. The SPP
will be updated at a predictable cadence, typically coinciding with new HPE server
hardware launches. By enabling firmware to be updated online and integrating
firmware and system software updates in one operation, HPE SUM and the SPP offer
faster updates of individual servers and dramatically faster updates of entire
BladeSystem enclosures. Further improving system uptime and stability is the fact that
Hewlett Packard Enterprise provides 12 months of support for each Service Pack for
ProLiant release.
The user experience around HPE SUM and the SPP has been improved in several ways,
Page 7
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
starting with the web download. A single web page provides access to a single
download containing both the latest version of HPE SUM and the latest SPP. Optional
smaller subsets with only specific types of servers or specific operating systems are
offered to save on download time. The HPE SUM application provides a
straightforward, intuitive user interface that guides the user through the steps of
discovery, analyses and update, providing comprehensive information on available
updates, criticality and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which can be easily
updated from hpe.com, HPE SUM provides the tools to optimize stability and
consistency throughout the company. While HPE SUM and the SPP recommend the
combinations of firmware and system software that Hewlett Packard Enterprise has
found to be the best practice, the application gives customers the flexibility to set their
own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific attention for
interaction between firmware, drivers and agents both within the server as well as in
interaction with the BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as providing the input
for HPE SUM to deploy updates taking into account all interdependencies, when
determining the correct updates and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HPE SUM) can be
downloaded from http://www.hp.com/go/spp/download. More information can
be found: http://www.hp.com/go/SmartUpdate, http://www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Security
•
•
•
•
•
•
•
•
•
Availability
Power-on password
Administrator's password
Keyboard password (QuickLock)
HPE iLO 4 On System Management Chipset with:
–
SSL encryption
–
Secure Shell version 2
–
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
–
AES and RC4 encryption of video
External USB port enable/disable
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
Memory
• Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multibit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
• Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
• Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM. The DIMMs in
each paired memory channel must have identical HPE part numbers.
• Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
Page 8
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
•
•
Failed DIMM isolation improves the service time thus improving the overall system availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors improving
service time and overall system availability.
Mezzanine options and I/O
• Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
• Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
supporting multiple data paths routed to redundant interconnect modules.
• Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Storage
•
•
•
Two (2) Small Form Factor hot-plug SAS/SATA/SSD drive bays.
Choice of SAS controller:
− HPE Smart Array P220i Controller with 512MB FBWC, RAID 0 and 1 support, and
upgradeable firmware with recovery ROM capability.
− HPE Dynamic Smart Array B320i controller with optional 512MB FBWC upgrade and/or SAS
license upgrade for RAID 0 and 1 support (SAS license comes standard on pre-configured
models and comes as an upgrade option when selecting Configure-to-Order models).
Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.
Processor/Chipset
• Processor internal sensors & thermal control protection against over-temperature conditions.
• Cache parity/ECC protects cache data from accidental data corruption.
• Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
• Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
• Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self-test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
• Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
enclosure-based power supplies (configuration dependent).
• Up to ten (10) redundant enclosure-based hot-plug HPE Active Cool fans that scale to meet future
demands and optimize airflow, reduce power draw, and improve acoustic performance.
• Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
• HPE Dynamic Power Saver Mode the total enclosure power consumption is monitored in real time
and automatically adjusted with changes in demand for improved efficiency and reliability.
• HPE Dynamic Power Capping safely limits power usage without impacting performance by capping
peak instead of average power usage, removes risk to electrical infrastructure with fast-acting,
hardware-based capping algorithm, and reclaims more power by dynamically controlling power limits
based on workload demand.
• Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, etc.
• Enclosure crosslinks between adjacent to provide interconnect module-to-module connections or as
Virtual Connect module stacking links.
• Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services
and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic
Page 9
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Standard Features
support and repair is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available through HPE
Care Pack services or customized service agreements. Certain restrictions and exclusions apply. Hard drives
have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs
may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will
result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed
for easy replacement but may involve added complexity. Customers may choose to have Hewlett
Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Page 10
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Optional Features
Fibre Channel
Support
Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HPE ProLiant BL420c Gen8.
Compatible SAN
HPE ProLiant BL420c Gen8 server blades are optimized for HPE MSA, EVA and XP.
HPE ProLiant BL420c Gen8 server blades are compatible with select 3rd party SANs. Please see blade
storage page for more details at:
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HPE Virtual
Connect
HPE Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HPE Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections. HPE
Virtual Connect Enterprise Manager (VCEM) provides server management software with a central console to
administer network connections and workloads for thousands of servers. For more information on Virtual
Connect Enterprise Manager, see http://www.hp.com/go/vcem. For more information on Virtual Connect
Ethernet, Fibre Channel, Converged Network and management options, see
http://www.hp.com/go/virtualconnect.
HPE Insight
management
software
HPE Insight Control HPE Insight Control, a product option, delivers essential infrastructure management
that can help save time and money by making it easy to deploy, migrate, monitor,
remote control, and optimize your IT infrastructure through a single, simple
management console. For more information about this service, see
http://www.hp.com/services/insight.
HPE Insight Control includes one year of 24 x 7 HPE Software Technical Support and
Update Service ensuring rapid access to Hewlett Packard Enterprise support staff and
proactive delivery of software updates.
HPE Matrix
The HPE Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers
is an integrated command center that helps you instantly adjust to dynamic business
Operating
demands. This advanced infrastructure management software lets you reduce the cost
Environment
of common data center tasks by up to 40 percent while keeping pace with your
changing business.
The HPE Matrix OE includes the automated provisioning, optimization, and recovery
management capabilities for HPE CloudSystem Matrix, the ideal platform for private
cloud and Infrastructure as a Service (IaaS). For more information, see
http://www.hp.com/go/matrixoe.
HPE iLO Scale-Out
The HPE iLO Scale-Out license ideal for web/hosting/cloud service providers and High
Performance Computing environments. This license is a specific subset of iLO
Advanced functionality, provides fast remote access through Text Console via SSH,
lower operational cost with Dynamic power capping, and faster time to resolution
through Email-based Alerting and proactive notifications. With this newly designed
HPE iLO Scale-Out HPC customers now have a server management package solely
design and priced for their massive data environments. HPE iLO Scale-Out is available
on all HPE ProLiant Gen8 BL and SL platforms. For more information, see:
http://www.hp.com/go/iLO/scale-out
HPE iLO Advanced
HPE Integrated Lights-Out Advanced License a product option, providing smart
remote server management without compromise. iLO Advanced unlocks the full set of
remote administration functionality for all HPE ProLiant servers by activating the full
Page 11
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Optional Features
Virtual Keyboard Video and Mouse remote console, multi-user collaboration, console
record and replay, GUI-based and scripted virtual media and virtual folders, and
enhanced security and power management functionality. For more information, see:
http://www.hp.com/go/iloadvance
HPE OneView
The HPE OneView architecture combines server, storage, and networking with control of datacenter
environmental into a single, integrated management platform. Architected to deliver lifecycle management for
the complete Converged Infrastructure, it facilitates collaboration, removes friction, collapses cycle times,
eliminates error-prone work, and accelerates time to value. HPE OneView v1.0 combines management of
servers and virtual connect with open integration to automate and customize existing tools and processes.
With OneView, you'll work smarter-with greater visibility and control-and fully capitalize on the benefits of a
Converged Infrastructure.
For more information on HPE OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HPE Cluster
Platforms
HPE Cluster Platforms are specifically engineered, factory-integrated large-scale
ProLiant clusters optimized for High Performance Computing, with a choice of servers,
networks and software. Operating system options include specially priced offerings for
Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPEC Server. A Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
HPE HPEC
Interconnects
High Performance Computing (HPEC) interconnect technologies are available for this
server as part of the HPE Cluster Platform portfolio. These high-speed InfiniBand and
Gigabit interconnects are fully supported by Hewlett Packard Enterprise when
integrated within an Hewlett Packard Enterprise cluster. Flexible, validated solutions
can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HPE Insight Cluster
Management Utility
HPE Insight Cluster Management Utility (CMU) is an HPE-licensed and HPE-supported
suite of tools that are used for lifecycle management of hyper scale clusters of Linux
ProLiant systems. CMU includes software for the centralized provisioning, management
and monitoring of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective. http://www.hp.com/go/cmu
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or
deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HPE storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and
respond faster to business opportunities.
Storage software that gets the job done:
• Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HPE data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
• Data Archive and Migration Software
The Hewlett Packard Enterprise storage software enables you to comply with data retention and
retrieval requirements, improve application performance, and reduce costs by efficiently migrating
infrequently accessed or less valuable data to lower cost storage.
• Storage Resource Management Software (SRM)
The Hewlett Packard Enterprise storage resource management software reduces operational costs
and provides the command and control foundation you need to efficiently manage and visualize your
physical and virtual environments.
• Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in
Page 12
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Optional Features
disaster recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in HPE storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
HPE StoreVirtual VSA
HPE StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or Microsoft
Hyper-V virtualized server. This server model starting November 2013, includes a limited license for HPE
StoreVirtual VSA software with 1TB of capacity. To download the license key and StoreVirtual VSA software,
visit www.hp.com/go/unlockVSA.
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more information and
access to the 60-day free trial, visit: http://www.hp.com/go/tryVSA
•
HPE Insight Online HPE Insight Online is a new addition to the HPE Support Center for one stop, secure access to product and
Hewlett Packard Enterprise support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HPE Insight Remote Support. With Insight Online's easy
navigation you can efficiently track your IT support contracts and device status from anywhere and at
anytime. http://www.hp.com/go/insightonline
HPE Proactive
Insight experience
Prevent problems with innovative, automated monitoring tools and proactive services. The HPE Proactive
Insight experience consists of using Insight Online, Insight Remote Support, and Proactive Care Support
Service as one integrated solution. The Proactive Insight experience provides you with expert advice and
personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve
problems quickly. For more information, visit: http://www.hp.com/go/proactiveinsightexperience
Factory Express
Portfolio for
Servers and
Storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett
Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. Hewlett Packard Enterprise products supported through Factory Express include a wide array of
servers and storage: HPE Integrity, HPE ProLiant, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www8.hp.com/us/en/campaigns/factory-express/server-storagenetworking.html
HPE Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your
existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact Hewlett Packard Enterprise's Customer Business Center or an Authorized
Partner for assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index
Page 13
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Service and Support
Service and Support HPE Technology Services for Industry Standard Servers
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support
technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay
informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Care Pack Services
HPE Care Pack Services enable you to order the right service level, length of coverage and response time as
you purchase your new server, giving you full entitlement for the term you select.
Recommended HPE Care Pack Services for your HPE product
Optimized Care
HPE Proactive Care Advanced - 24x7 coverage, three year Care Pack Service
Achieve a higher return on your product investment with the personal attention from a locally assigned
Account Support Manager who delivers recommendations designed to improve availability and performance.
Leverage your system’s ability to connect to Hewlett Packard Enterprise for automated problem detection
and rapid critical event management to increase stability and reduce unplanned downtime. This
recommendation provides 24x7 coverage with four-hour response for hardware and two-hour callback for
supported software. Collaborative call management comes with Proactive Care Advanced or you may choose
full support from Hewlett Packard Enterprise where we own all cases through to resolution. Hewlett Packard
Enterprise is a leading provider of support services for most operating systems used on HPE BladeSystem
with long, successful partnerships with vendors such as Microsoft, Red Hat, VMware, SUSE and others.
Purchasing software support from Hewlett Packard Enterprise simplifies troubleshooting and shortens time to
resolution with one call for hardware or software questions.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en
Standard Care
HPE Proactive Care with 24x7 coverage, three year Care Pack Service
HPE Proactive Care helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics
and proactive consultations when your products are connected to Hewlett Packard Enterprise. This Care
Pack Service combines three years’ proactive reporting and advice with our 24x7 coverage and enhanced
escalation management, four hour hardware response time and two hour call back for software questions on
leading industry standard software running on your HPE ProLiant server.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Related Services
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
Factory Express for Servers and storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett
Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed. For more information on Factory Express services for your specific
server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
Data Privacy Services
Protect your data through better media management. HPE Data privacy services help manage and protect
sensitive data to reduce the risk of unauthorized access to private information and help meet compliance
requirements. Our retention services allow you to keep drives and other devices upon failure, our removal
Page 14
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Service and Support
services provide convenient data sanitization and our recovery services allow you to safely retire IT assets
and capture any remaining value from the hardware. http://www.hp.com/services/dataprivacy
Additional HPE Care Pack services can be found at: http://www.hp.com/go/cpc
Get connected to
Hewlett Packard
Enterprise to
improve your
support experience
Connecting products to Hewlett Packard Enterprise will help prevent problems with 24x7monitoring,
prefailure alerts, automatic call logging, and parts dispatch, plus current data will be available for the proactive
reports that are part of Proactive Care Services. With Connected products, you can have a dashboard to
manage your IT anywhere, anytime, from any device.
HPE Support Center Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with Hewlett Packard Enterprise experts,
access support resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
The Hewlett Packard Enterprise Support Center Mobile App allows you to resolve issues yourself or quickly
connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: HPE Support Center Mobile App is subject to local availability.
Parts and Materials Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
QuickSpecs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction.
For more
information
To learn more on HPE ProLiant servers and HPE BladeSystem servers, please contact your Hewlett Packard
Enterprise sales representative or Hewlett Packard Enterprise Authorized ServiceOne Channel Partner. Or
visit: http://www.hp.com/services/bladesystem
Page 15
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO
server). To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett
Packard Enterprise approved configurator. Contact your local sales representative for information on CTO product offerings
and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HPE Models
HP ProLiant BL420c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
Configurable Model ships with:
One (1) FlexibleLOM connector providing a choice of one (1) of the supported 10Gb
FlexibleLOMs (see Step 2)
One (1) SAS controller connector providing a choice of one (1) of the supported SAS
controllers (see step 2)
Two (2) HPE small form factor hot-plug SAS/SATA/SSD hard drive bays
One (1) x8 PCIe 3.0 I/O expansion slot (Type A)
One (1) x16 PCIe 3.0 I/O expansion slot (Type B)
One (1) integrated USB connector and one (1) Micro SDHC connector
One (1) TPM connector
HPE iLO Management Engine (standard)
HP ProLiant BL420c Gen8 1Gb FlexibleLOM Configure-to-order Blade Server
Configurable Model ships with:
640996-B21
690142-B21
One (1) FlexibleLOM connector providing a choice of one (1) of the supported 1Gb
FlexibleLOMs (see Step 2)
One (1) SAS controller connector providing a choice of one (1) of the supported SAS
controllers (see step 2)
Two (2) HPE small form factor hot-plug SAS/SATA/SSD hard drive bays
One (1) x8 PCIe 3.0 I/O expansion slot (Type A)
One (1) x16 PCIe 3.0 I/O expansion slot (Type B)
One (1) integrated USB connector and one (1) Micro SDHC connector
One (1) TPM connector
HPE iLO Management Engine (standard)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HPE Processors
For single processor configuration choose:
Core Processor Option Kits
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one
xxxxxx-B21 in Step 4.
E5-2400 v2 series Processors
HP BL420c Gen8 Intel® Xeon® E5-2470 v2 (2.4GHz/10-core/25MB/95W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430 v2 (2.5GHz/6-core/15MB/80W) FIO Processor Kit
724181-L21
724182-L21
724183-L21
724184-L21
Page 16
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Configuration Information - Factory Integrated Models
HP BL420c Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) FIO Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) FIO Processor Kit
NOTE: In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor
must be installed in processor slot 1 for access to the first mezzanine expansion slot
(expansion slot 1). A processor must be installed in processor slot 2 for access to the
second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different processor
models is not supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
HPE Memory
724185-L21
724188-L21
724189-L21
724190-L21
724191-L21
NOTE: HPE memory from previous generation servers are not qualified or warranted
with this HPE ProLiant BL420c Server. HPE SmartMemory is required to realize the
memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HPE SmartMemory
QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot
be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM,
UDIMM and LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
this document.
HPE SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
713981-B21
731765-B21
713983-B21
713985-B21
Page 17
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Configuration Information - Factory Integrated Models
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage
Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HPE Networking
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
713975-B21
713977-B21
713979-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
708643-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
NOTE: Depending on the memory configuration and processor model, 1866MHz,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration Tool for
details at: http://www.hp.com/go/ddr3memory-configurator.
647903-B21
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module
bay 1 and the other to bay 2.
Page 18
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Configuration Information - Factory Integrated Models
10Gb FlexibleLOM Adapters
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
HP FlexFabric 10Gb 2-port 554FLB FIO Adapter
HP FlexFabric 10Gb 2-port 534FLB FIO Adapter
HP Flex-10 10Gb 2-port 530FLB FIO Adapter
NOTE: HPE ProLiant BL420c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(640996-B21) must be selected in order to select one of the 10Gb FlexibleLOM
Adapters
684214-B21
684212-B21
700742-B21
684211-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs
1Gb FlexibleLOM Adapters
HPE Storage
Controller
HP Ethernet 1Gb 2-port 361FLB FIO Adapter
NOTE: HPE ProLiant BL420c Gen8 1Gb FlexibleLOM Configure-to-order Blade Server
(690142-B21) must be selected in order to select the 1Gb FlexibleLOM Adapter.
684216-B21
HP Dynamic Smart Array B320i FIO Adapter for BL420c Gen8
NOTE: B320i controller requires SAS License Key for SAS RAID 0,1 (see "HPE Storage
Controllers - Optional Upgrades" below in the section labeled "Core Options").
HP Smart Array P220i Controller FIO Kit
NOTE: P220i Controller comes standard with 512MB FBWC.
651732-B21
690164-B21
Step 3: Choose Additional Factory Integration Options
HPE Insight
Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
Converged
Infrastructure
Management
Software
HPE OneView with iLO Advanced - Server hardware required on same purchase
order
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
C6N36A
F6Q89A
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core
Options and Additional sections below; or the following:
•
HPE BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12790_na/12790_na.html
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12810_na/12810_na.html
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL420c Gen8 requires the c7000 enclosure to be configured with 10
fans and the c3000 enclosure to be configured with 6 fans.
Page 19
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
HPE Networking
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when
connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected
to an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb
interconnect in bays 3-8 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE
BladeSystem c3000 Enclosure).
10 Gigabit Ethernet Mezzanines
HP Ethernet 10Gb 2-port 560M Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14221_na/14221_na.html.
665246-B21
647590-B21
HP Flex-10 10Gb 2-port 552M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14218_na/14218_na.html.
674764-B21
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14617_na/14617_na.html
700748-B21
HP Flex-10 10Gb 2-port 530M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14217_na/14217_na.html.
631884-B21
1 Gigabit Ethernet Mezzanines
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14335_na/14335_na.html
615729-B21
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors and is already included in the pre-configured models. However, it must be
added in Step 2 for Configure-to-order Models. The FlexibleLOM options below are
used to change these original FlexibleLOMs.
10 Gigabit Ethernet FlexibleLOM Adapters
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14331_na/14331_na.html
655639-B21
HP FlexFabric 10Gb 2-port 554FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14219_na/14219_na.html
647586-B21
HP FlexFabric 10Gb 2-port 534FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14617_na/14617_na.html
700741-B21
HP Flex-10 10Gb 2-port 530FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
656590-B21
Page 20
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
at: http://h18000.www1.hp.com/products/QuickSpecs/14216_na/14216_na.html
1Gb FlexibleLOM Adapters
HP Ethernet 1Gb 2-port 361FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14333_na/14333_na.html
652500-B21
HPE Fibre Channel HP LPe1205A 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14338_na/14338_na.html
659818-B21
HP QMH2572 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/14230_na/14230_na.html
651281-B21
HPE Processors
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor
must be installed in processor slot 1 for access to the first mezzanine expansion slot
(expansion slot 1). A processor must be installed in processor slot 2 for access to the
second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: the letter "L" preceding the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
E5-2400 v2 series Processors
HP BL420c Gen8 Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) Processor Kit
HP BL420c Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) Processor Kit
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor
must be installed in processor slot 1 for access to the first mezzanine expansion slot
(expansion slot 1). A processor must be installed in processor slot 2 for access to the
second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different processor
models is not supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2403 and E5-2407.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the
724181-B21
724182-B21
724183-B21
724184-B21
724185-B21
724188-B21
724189-B21
724190-B21
724191-B21
Page 21
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
HPE Memory
NOTE: HPE memory from previous generation servers are not qualified or warranted
with this HPE ProLiant BL420c Gen8 Server. HPE SmartMemory is required to realize
the memory performance improvements and enhanced functionality listed in this
document for Gen8. For additional information, please see the HPE SmartMemory
QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot
be mixed within a server. The majority of ProLiant Gen8 servers support RDIMM,
UDIMM and LRDIMM.
HPE SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
713981-B21
731765-B21
713983-B21
713985-B21
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
713975-B21
713977-B21
713979-B21
Page 22
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HPE Hard Drives
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
708643-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
NOTE: Depending on the memory configuration and processor model, 1866MHz,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration Tool
for details at: http://www.hp.com/go/ddr3memory-configurator.
647903-B21
NOTE: The ProLiant BL420c Gen8 server includes the new HPE hot-plug small form
factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance
errors. Hewlett Packard Enterprise drives from previous generation servers are not
compatible with the BL420c Gen8 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the
server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of
other drives types is not supported.
NOTE: HPE hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for technical specifications and additional
information at:
http://h18000.www1.hp.com/products/QuickSpecs/13021_na/13021_na.html.
655710-B21
655708-B21
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
Page 23
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
652605-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see QuickSpecs for technical specifications and additional information
at: http://h18000.www1.hp.com/products/QuickSpecs/12244_na/12244_na.html.
652749-B21
652745-B21
12G SAS (2.5-inch) 512e SC HDD
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty Hard Drive
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard Drive
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
12G SAS RI-3 SFF SC SSD
748387-B21
765464-B21
791034-B21
765466-B21
HPE 480GB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 960GB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 1.92TB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 3.84TB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
12G SAS MU-3 SFF SC SSD
816562-B21
816568-B21
816572-B21
816576-B21
HPE 400GB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 800GB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 1.6TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 3.2TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
6G SATA (2.5-inch) 512e SC HDD
822555-B21
822559-B21
822563-B21
822567-B21
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
6G SATA 2.5in WI-PLP SC SSD
765453-B21
765455-B21
HP 1.2TB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 400GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
6G SATA 2.5in MU-PLP SC SSD
804677-B21
804671-B21
804665-B21
804639-B21
HP 1.6TB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 200GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
6G SATA 2.5in RI-PLP SC SSD
804631-B21
804625-B21
832414-B21
804613-B21
HP 1.6TB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 240GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 120GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 80GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804605-B21
804599-B21
804593-B21
804587-B21
804581-B21
804575-B21
Page 24
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State
Drives
NOTE: These drives support Gen8 servers only.
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State
Drives
717965-B21
734360-B21
NOTE: These drives support Gen8 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA Value Endurance SFF (2.5-inch) SC Enterprise Value M1 Solid State Drives
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
6G SATA VE Hot Plug SFF (2.5-inch) SC EV G1 Solid State Drives
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid
State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid
State Drive
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid
State Drive
717973-B21
739898-B21
717971-B21
739888-B21
717969-B21
764923-B21
764925-B21
764927-B21
764929-B21
691868-B21
691866-B21
691864-B21
691862-B21
756657-B21
756636-B21
756621-B21
Page 25
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
6G SATA LE Hot Plug SFF (2.5-inch) SC EL Solid State Drives
HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid
State Drive
6G SATA Read Intensive (2.5-inch) SC G2 Solid State Drive
756601-B21
HP 240GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
12G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
789135-B21
789145-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
12G SAS Hot Plug SFF (2.5-inch) SC ENT HDD
759212-B21
759210-B21
759208-B21
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
12G SAS ME SFF (2.5-inch) SC Enterprise Mainstream H2 Solid State Drives
781518-B21
785069-B21
781516-B21
785067-B21
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
12G SAS SFF (2.5in) RI-3 SC SSD
779164-B21
HPE 3.84TB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 1.92TB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 960GB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 480GB 12G SAS Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
12G SAS SFF (2.5in) MU-3 SC SSD
816576-B21
816572-B21
816568-B21
816562-B21
HPE 3.2TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 1.6TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 800GB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 400GB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
822567-B21
822563-B21
822559-B21
822555-B21
HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
12G SAS Write Intensive SFF (2.5-inch) SC 3yr Wty H2 Solid State Drive
757339-B21
HP 200GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
779168-B21
779172-B21
779176-B21
762263-B21
762261-B21
802578-B21
Page 26
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Core Options
HP 400GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 1.92TB 12G SAS Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the
server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of
other drives types is not supported.
NOTE: HPE Dynamic Smart Array B320i Controller requires a SAS license key for
RAID 0 and 1 functionality for SAS drives when selecting a Configure-to-Order server.
The SAS RAID license comes standard with preconfigured servers. SATA RAID 0/1
standard.
NOTE: Please see the QuickSpecs for technical specifications and information at:
http://h18000.www1.hp.com/products/QuickSpecs/14038_na/14038_na.html.
802582-B21
802586-B21
802891-B21
Page 27
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Additional Options
HPE Insight
software
HPE Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electronic
License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HPE Insight Management Media Kit contains DVDs without licenses. Contains
HPE Systems Insight Manager, HPE Insight Control, HPE Matrix Operating
Environment, and Virtual Connect Enterprise Manager software. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: HPE Insight Control 7.2 introduces Insight Control server provisioning, a new
capability ideal for multi-server OS and firmware provisioning to ProLiant and
BladeSystem servers. Insight Control server provisioning is included and licensed as
part of HPE Insight Control. A media kit, "HPE Insight Control server provisioning
USB media kit" (# BD883A), including a USB, is available for customers who require a
physical copy of the media loaded with Insight Control server provisioning software.
Please note that this media kit is separate and in addition to the "HPE Insight
Management DVD media kit" (#C6N31A).
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HPE Software Technical Support Service.
NOTE: Licenses ship without media. The HPE Insight Management Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h18004.www1.hp.com/products/QuickSpecs/12631_na/12631_na.html
HPE iLO Advanced
HPE Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
HPE Integrated Lights-Out (iLO)
512488-B21
BD502A
HPE iLO Scale Out
HP Integrated Lights-Out Scale-Out 3yr 24x7 Tech Support and Updates Flex Quantity
License
HP Integrated Lights-Out Scale-Out 1yr 24x7 Tech Support and Updates Flex Quantity
License
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates Flex
Qty E-LTU
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates Flex
BD776A
BD778A
BD776AAE
BD778AAE
Page 28
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Additional Options
Qty E-LTU
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates
Tracking License
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates
Tracking License
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HPE Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the
iLO QuickSpecs at http://www.hp.com/go/iLO
Converged
Infrastructure
Management
Software
BD777A
BD779A
HPE OneView
HPE OneView with iLO Advanced
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView w/o iLO including 3yr 24x7 Support 1 Server LTU
HP OneView w/o iLO including 3yr 24x7 Support Flex Quantity E-LTU
HP OneView w/o iLO including 3yr 24x7 Support FIO 1 Server LTU
HPE OneView Media Kit Phys No Lic
HP OneView Media Kit Phys No Lic
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/QuickSpecs/14621_na/14621_na.html
E5Y34A
E5Y35AAE
P8B24A
P8B26AAE
P8B31A
E5Y37A
Cloud Management Helion Software
Software
HPE Helion OpenStack
High Performance
Clusters
HPE Helion OpenStack 5yr 9x5 Support RTU
HPE Helion OpenStack 5yr 9x5 Support E-RTU
HPE Helion OpenStack 5yr 24x7 Support RTU
HPE Helion OpenStack 5yr 24x7 Support E-RTU
HPE Helion Platform
P9A13A
P9A13AAE
P9A14A
P9A14AAE
HPE Helion Platform 5yr 9x5 Support RTU
HPE Helion Platform 5yr 9x5 Support E-RTU
HPE Helion Platform 5yr 24x7 Support RTU
HPE Helion Platform 5yr 24x7 Support E-RTU
HP Helion Dev Plat
P9A15A
P9A15AAE
P9A16A
P9A16AAE
HPE Helion Development Platform 5yr 9x5 Support RTU
HPE Helion Development Platform 5yr 9x5 Support E-RTU
HPE Helion Development Platform 5yr 24x7 Support RTU
HPE Helion Development Platform 5yr 24x7 Support E-RTU
P9A17A
P9A17AAE
P9A18A
P9A18AAE
HPE Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple
QL803B
BD476A
Page 29
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Additional Options
licenses and support with a single activation key. Each license is for one node
(server). Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate must
be redeemed online in order to obtain a license key. Customer also will receive a
support agreement.
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/QuickSpecs/12612_na/12612_na.html.
BD477A
HPE I/O Accelerator HP 1.2TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
Options
HP 1.6TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
794603-B21
794605-B21
HPE Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™ Drive
Encryption (BitLocker) is a data protection feature available in Windows Server®
2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform
Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data
and to ensure that a server running Windows Server 2008 has not been tampered
with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://h20195.www2.hp.com/v2/getpdf.aspx/4AA5-4782ENW.pdf
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
HPE Storage
Controllers
HPE Smart Array P731m/2G Controller
HP Smart Array P731m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2, which
requires the second processor to be installed for functionality.
HP Smart Array P731m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2, which
requires the second processor to be installed for functionality.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/QuickSpecs/14626_na/14626_na.html.
(Smart Array P731m Controller)
HPE Smart Array P721m Controller
HP Smart Array P721m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2, which
requires the second processor to be installed for functionality.
HP Smart Array P721m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
NOTE: This option is a Type B mezzanine and only supported on mezzanine 2, which
requires the second processor to be installed for functionality.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
698535-B21
698536-B21
650072-B21
655636-B21
Page 30
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Additional Options
http://h18000.www1.hp.com/products/QuickSpecs/14404_na/14404_na.html.
(Smart Array P721m Controller)
HPE Dynamic Smart Array B320i Specific Options:
NOTE: The following storage controller options below are not supported on the HPE
Smart Array P220i controller.
HP 512MB B-series Dynamic Smart Array Flash Backed Write Cache with 24 inch Cable
HP SAS License Key No Media 1 Single Server License for B320i
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/QuickSpecs/13200_na/13200_na.html
(Smart Array Advanced Pack)
HPE Secure
Encryption
HP Secure Encryption per Svr Entitlement
HPE InfiniBand
Mezzanines
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is
active (regardless of operating mode). When installed in any other mezzanine slot,
both ports are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HPE BladeSystem
c7000 Enclosure. For additional information, please see the HPE BladeSystem c7000
Enclosure and InfiniBand QuickSpecs at:
http://h18004.www1.hp.com/products/QuickSpecs/12586_na/12586_na.html
http://h18000.www1.hp.com/products/QuickSpecs/13078_na/13078_na.html
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the
server.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR
mode and may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HPE Flash Media
Kits for USB Drives
HPE Care Pack
Services
676473-B21
BC393A
C9A82AAE
644160-B21
644161-B22
702213-B21
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/QuickSpecs/13971_na/13971_na.html
Proactive Care - Collaborative Support plus Proactive services delivered by the on
shore/near shore Advanced Solution Center (ASC) and backed by the global delivery
organization, end-to-end case ownership from a Technical Solution Specialists and
Technical Account Manager who remotely delivers firmware/software revision
management, proactive scans and incident trend reports. Recommended for customers
running a virtualized infrastructure and/or customers who desire an enhanced call support
experience.
HPE 3 year Proactive Care 24x7 ProLiant BL4xxc Service
726116-B21
700139-B21
737953-B21
U3B14E
Page 31
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Additional Options
HPE 3 year Proactive Care 24x7 with DMR ProLiant BL4xxc Service
HPE 3 year Proactive Care Call to Repair ProLiant BL4xxc Service
HPE 3 year Proactive Care Call to Repair 24x7 with DMR ProLiant BL4xxc Service
Proactive Care Personalized Support Environmental Option - to add an onsite
Account Support Manager (ASM) to Proactive Care. ASM is an assigned resource who
delivers support planning and brings technical expertise and best practices advice for the
customer's environment.
Installation Services - reduce the time required to get your system up and running and
help minimize disruptions to your business.
HP Install c-Class Server Blade Service
HP Hardware Installation during Non-Standard Hours c-Class Server Blade Service
Additional HPE Care Pack services can be found at:
http://www.hp.com/go/cpc
U3B17E
U3B20E
U3B23E
UE493E
UG869E
Page 32
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
http://www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2400 family or Intel Xeon E5-2400v2 family processor socket contains three memory channels that support
two DIMMs each for a total of six (6) DIMMs per installed processor or a grand total of twelve (12) DIMMs for the server. Up to 32GB
capacity DIMMs are supported for 384GB of memory (12 DIMM slots x 32GB per DIMM).
Memory Population Rules and Guidelines:
• A minimum of one DIMM is required per server.
• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two processor system, only half of the DIMM slots are available.
• To maximize performance, it is recommended to balance the total memory capacity between all installed processors and to
load the channels similarly whenever possible.
• RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher voltage.
• RDIMMs, LRDIMMs, and UDIMMs cannot be mixed.
• DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the memory type and number of installed processors.
• HPE memory from previous generation servers is not compatible with the BL420c Gen8 Server Blade.
• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional
information, please see the HPE SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html.
• For memory population rules and additional memory guidelines, please see the BL420c Gen8 user guide at
http://www.hp.com/support.
BL420c Gen8 Supported Memory Bandwidth on Intel E5-2400 series Processors
Load
Reduced
Registered
DIMMS
(RDIMMs)
(LRDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
DIMM Type
DIMM Rank
Single Dual Dual
Quad
Single
Dual
Rank
Rank
Rank
Single Rank Dual Rank Rank Rank Rank
(1R)
(2R)
(1R) (2R) (2R)
(4R)
(1R)
(2R)
DIMM Capacity
4GB 4GB 8GB 8GB 8GB 16GB 16GB
32GB
2GB 2GB 4GB 4GB 8GB 8GB
DIMM Native Speed
1333 1600 1333 1600 1600 1333 1600
1333
1333 1600 1333 1600 1600 1333
(MHz)
LV Std LV Std Std
LV Std
LV
LV Std LV Std Std LV
Voltage1
1
LV= low voltage at 1.35V; Std = standard voltage at 1.5V.
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)2
12 slot servers
48
48
96
96
96
192 192
384
24
24
48
48
96
96
POPULATED DIMM SPEED (MHz)
1333 1600 1333 1600 1600 1333
1 DIMM Per Channel
1333 1600 1333 1600 1600 1333 1600
13333
2 DIMM Per Channel
1333 1600 1333 1600 1600 1333 1600
13334 1600 13334 1600 1600 13334
13333
2
Maximum capacity will vary based on individual server platform qualification schedule
Page 33
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Memory
Using HPE SmartMemory, 1333MHz LRDIMM operate at 1.35V for 2 DIMMs per channel (2DPC). Third party 1333MHz
LRDIMM memory may only support 1.5V at 2DPC.
4
Using HPE SmartMemory, UDIMMs at 2DPC are supported up to 1333MHz. Third party UDIMMs at 2DPC may only support
up to 1066MHz.
NOTE: Maximum memory speed is a function of the processor QPI bus speed; see the table below "Memory Speed by
Processor Model".
3
Intel Gen8 Supported Memory Bandwidth on E5-2400v2 series Processor
DIMM Type
DIMM Rank
Load
Reduced
(LRDIMMs)
Registered DIMM
Single
Dual
Quad
Rank
Single Rank Dual Rank Rank (1R) Rank (2R)
(1R)
(2R)
(4R)
4GB
8GB
8GB
16GB
32GB
1600
1600
1600
1600
1866
Single
Rank
(1R)
2GB
1600
DIMM Capacity
DIMM Native Speed
(MT/s) - >
Voltage
LV
LV
LV
LV
Std
LV
1
LV= low voltage at 1.35V; Std = standard voltage at 1.5V.
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)*
12 slot servers
48
96
96
192
384
24
POPULATED DIMM SPEED (MT/s)
1600
1 DIMM Per Channel
1600
1600
1600
1600
18661
1
1600
2 DIMM Per Channel
1600
1600
1600
1600
1866
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
1
Intel Xeon E5-2400v2 architecture supports maximum 1600MHz memory speeds.
Unbuffered DIMM
Dual
Rank
(2R)
4GB
8GB
1600
1600
LV
LV
12
12
48
96
1600
1600
1600
1600
Memory Speed by E5-2400 series Processor Model
Processor Models
E5-2450, E5-2450L, E5-2470
E5-2420, E5-2430, E5-2430L, E5-2440
E5-2403, E5-2407
Supported Memory Speeds
1600/1333/1066MHz
1333/1066MHz
1066MHz
Memory Speed by E5-2400 v2 series Processor Model
Processor Models
E5-2420 v2, E5-2430 v2, E5-2430L v2, E5-2440 v2, E5-2450 v2,
E5-2450L v2, E5-2470 v2
E5-2403 v2, E5-2407 v2
Supported Memory Speeds
1600/1333MHz
1333MHz
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre-Configured Models
E5-2450 (6x4GB 1600)
E5-2450L, E5-2430, E5-2403
Standard Memory
24GB
(6x 4GB)
12GB
Maximum Memory Plus
Optional Memory
120GB
(6x4GB + 6x 16GB)
156GB
Standard Memory Replaced
with Optional Memory
384GB
(12x 32GB LRDIMM)
384GB
Page 34
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Memory
(3x4GB 1333)
(3x 4GB)
(3x 4GB + 9x 16GB)
(12x 32GB LRDIMM)
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
• 2GB = 2,048MB
• 4GB = 4,096MB
• 8GB = 8,192MB
• 16GB = 16,384MB
• 32GB = 32,768MB
Memory options part number decoder
Following are memory options available from HP:
NOTE: HPE memory from previous generation servers are not qualified or warranted with this HPE ProLiant BL420c Gen8
Server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in
this document for Gen8. For additional information, please see the HPE SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority
of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
HPE Memory
HPE SmartMemory
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 v2 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low
Voltage Memory Kit
Registered DIMMs (RDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
713981-B21
731765-B21
713983-B21
713985-B21
647893-B21
Page 35
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Memory
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-12800E (DDR3-1600) Unbuffered CAS-11 Low
Voltage Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400v2 series Processors.
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
713975-B21
713977-B21
713979-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
HP 32GB (1x32GB) Quad Rank x4 PC3-14900L (DDR3-1866) Load Reduced CAS-13
Memory Kit
Load Reduced DIMMs (LRDIMMs)
NOTE: The following memory is supported by the E5-2400 series Processors.
708643-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9
Low Voltage Memory Kit
NOTE: Depending on the memory configuration and processor model, 1866MHz,
1600MHz and 1333MHz memory may operate at a lower speed. Please see the see
the "Memory" section in this document and the Online Memory Configuration Tool
for details at: http://www.hp.com/go/ddr3memory-configurator.
647903-B21
Page 36
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Storage
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD
hard drives
Page 37
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Technical Specifications
System Unit
Dimensions (H x W 7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
x D)
(with bezel)
Weight
Maximum: all
14.00 lb (6.33 kg)
processors, 12 DIMMs,
(approximate)
hard drives, mezzanine
cards, and two flash
cache batteries
installed)
Minimum: one
10.50 lb (4.75 kg)
processor and 2
DIMMs installed
Power
For power specifications including input requirements, BTU rating, and power supply
output, please see the:
Specifications
• HPE BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12790_na/
12790_na.html.
• HPE BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12810_na/
12810_na.html.
NOTE: For optimal cooling and system performance the BL420c Gen8 requires the
c7000 enclosure to be configured with 10 fans and the c3000 enclosure to be
configured with 6 fans.
To review typical system power ratings use the HPE Power Advisor which is available
via the online tool located at: http://www.hp.com/go/hppoweradvisor.
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating
of 1.0°C per every 305 m (1.8°F per every 1,000 ft) above sea
level to a maximum of 3,050 m (10,000 ft), no direct sustained
sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit
may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan
fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is
20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet
bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet
bulb temperature, non-condensing.
Operating
3,050 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude
change rate is 457 m/min (1,500 ft/min).
Non-operating
9,144 m (30,000 ft). Maximum allowable altitude change rate is
457 m/min (1,500 ft/min).
For acoustic noise specifications, please see the HPE BladeSystem c-Class Enclosures
Page 38
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Technical Specifications
QuickSpecs located at:
HPE BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12790_na/
12790_na.html
HPE BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12810_na/
12810_na.html
HPE Smart Array
P220i Controller
Disk Drive Interface 6Gb/s SAS (Serial Attached SCSI)
Server Interface
x4 PCI Express host interface
Cache Memory
512MB flash backed write cache (FBWC) cache standard
Logical Drives
Supported
64 (with included 512MB cache)
Host Memory
Addressing
64-bit, supporting servers memory space greater than 4GB
RAID Support
RAID 1 (mirroring) and RAID 0 (striping)
Other
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
HPE Dynamic Smart Dimensions
Embedded
Array B320i
Disk Drive Interface Up to 6Gb/s SAS (Serial Attached SCSI)
Controller
Up to 6Gb/s SATA (Serial ATA)
- Transfer rate
Connectors
2 internal 4X connectors
Server Interface
x8 PCIe 3.0 provides 8GB/s maximum bandwidth
Speed
8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Cache Memory
Zero Memory RAID has no cache memory
optional 40-bit 512MB ECC protected Flash Backed Write Cache (FBWC)
Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache
Logical Drives
Supported
HPE FlexFabric
10Gb
2-port 554FLB
FlexibleLOM
Host Memory
Addressing
64-bit, supporting greater than 4GB server memory space
Hot Plug Support
Yes
RAID Support
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC
NOTE: 512 MB cache is required to enable RAID 5 support
Type
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardwarebased iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet
capability)
Network Processor Emulex BE3
Data Transfer
Method
x8 PCIe 2.0
Network Transfer
Rate
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
Page 39
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Technical Specifications
IEEE Compliance
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HPE
BladeSystem c-Class interconnect components. Both ports will operate at the same
speed.
NOTE: Each port on the 554FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x
Standard Features ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and
Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Hardware-based accelerated iSCSI
iSCSI boot
Flex-10 capability
Fibre Channel over Ethernet (FCoE)
TCP/IP offload engine (stateless TCP/IP)
Autosensing 1Gb/10Gb Ethernet
HPE Ethernet 1Gb
2-port 361FLB
Adapter
Type
Dual port 1Gb Ethernet FlexibleLOM
Network Processor Intel I350 Ethernet Controller
Data Transfer
Method
x4 PCIe 2.0
Network Transfer
Rate
Two ports, each at 1000 Mbps full duplex (theoretical maximum)
NOTE: The 361FLB adapter transmits from the server at only 1 Gbps full duplex per
port.
802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x, IEEE1588, 802.1AS
IEEE Compliance
Standard Features ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and
Switch-Assisted Load Balancing
TCP/IP checksum offloading
large send offloading
Wake-on-LAN
jumbo frames
PXE
VLAN tagging
Virtualization
IEEE 1588, DMA Coalescing
HPE Sea of Sensors 3-D Technology
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest Hewlett Packard
Enterprise sales office. Products returned to Hewlett Packard Enterprise will be
recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hp.com/go/green. These instructions may be used by recyclers
and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM
customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 40
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Summary of Changes
Date
11-Dec-2015
Version History
From Version 31 to 32
Action
Added
Changed
Removed
28-Sep-2015
From Version 30 to 31
Changed
Added
Removed
17-Aug-2015
From Version 29 to 30
Changed
Added
Removed
01-Jun-2015
From Version 28 to 29
Added
Removed
30-Mar-2015
From Version 27 to 28
Added
Removed
09-Feb-2015
01-Dec-2014
From Version 26 to 27
From Version 25 to 26
Changed
Added
Description of Change
SKUs added in Core Options and Additional Options section:
816562-B21, 816568-B21, 816572-B21, 816576-B21, 822555-B21,
822559-B21, 822563-B21, 822567-B21, P9A13A, P9A13AAE, P9A14A,
P9A14AAE, P9A15A, P9A15AAE, P9A16A, P9A16AAE, P9A17A,
P9A17AAE, P9A18A, P9A18AAE
Memory, Additional Options, Core Options, Configuration Information
– Factory Integrated Models sections were updated.
Obsolete SKU deleted:
789155-B21, E5Y38A, E5Y39AAE, 667372-B21, 667373-B21, 667423B21, 667374-B21, 667375-B21, 667424-B21, 667376-B21, 667421-B21,
667422-B21.
Core Options section and links were updated.
SKUs added in OneView:
P8B24A, P8B26AAE, P8B31A
Obsolete SKUs were deleted:
F6Q89AAE, 741155-B21
Standard Features Sections was updated.
SKUs added in Additional Options and Core Options sections:
C9A82AAE, 804677-B21, 804671-B21, 804665-B21, 804639-B21,
804631-B21, 804625-B21, 832414-B21, 804613-B21, 804605-B21,
804599-B21, 804593-B21, 804587-B21, 804581-B21, 804575-B21
Obsolete SKUs deleted:
U6W98E
SKUs added in Core Options section:
748387-B21, 791034-B21
Obsolete SKUs removed:
741159-B21, 741151-B21
SKUs Added:
802578-B21, 802582-B21, 802586-B21, 802891-B21, 765453-B21,
765455-B21, 765464-B21, 781518-B21, 765466-B21, 789135-B21,
789145-B21, 789155-B21, 794603-B21, 785069-B21, 781516-B21,
785067-B21
Obsolete SKUs deleted:
741146-B21, 741138-B21, 741142-B21
Service and Support section was updated
HDD SSD 6G and 12G:
779164-B21, 779168-B21, 779172-B21, 779176-B21, 764923-B21,
764925-B21, 764927-B21, 764929-B21
Removed
Obsolete SKUs removed:
668356-B21, 668357-B21, 668358-B21, 668359-B21, 667372-L21,
667373-L21, 667423-L21, 667374-L21, 667375-L21, 667424-L21,
667376-L21, 667421-L21, 667422-L21
Changed
Added
Core Options and Additional Options sections were updated
SKU Added on Hard Drives:
Page 41
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Summary of Changes
Removed
01-Nov-2014
10-Oct-2014
From Version 24 to 25
From Version 23 to 24
Changed
Changed
Removed
29-Sep-2014
From Version 22 to 23
Added
18-Aug-2014
From Version 21 to 22
Changed
Added
10-Jun-2014
From Version 20 to 21
Changed
Removed
31-Mar-2014
From Version 19 to 20
Changed
18-Feb-2014
From Version 18 to 19
Changed
22-Jan-2014
From Version 17 to 18
Changed
17-Jan-2014
From Version 16 to 17
Changed
09-Jan-2014
From Version 15 to 16
Changed
13-Dec-2013
From Version 14 to 15
Added
13-Sep-2013
From Version 13 to 14
Changed
10-Jun-2013
From Version 12 to 13
Changed
13-May-2013
From Version 11 to 12
Changed
25-Mar-2013
From Version 10 to 11
Changed
Added
757339-B21
756601-B21
Obsolete SKUs deleted:
653078-B21
Service and Support section was updated
Standard Features section was updated
Expansion Blade Support section deleted from Optional Features
HPE Ultrium Tape Blades, HPE Storage Blades and HPE Expansion
Blade sections deleted from Additional Options
SKUs added on HPE Hard Drives:
764929-B21, 764927-B21, 764925-B21, 764923-B21, 756657-B21,
756636-B21, 756621-B21
Maximum Internal Storage on Standard Features, Models, Core
Options sections were updated
SKUs Added on Hard Drives:
759212-B21, 759210-B21, 759208-B21
Overview, Standard Features, Preconfigured Models, Configuration
Information, Core Option sections were updated
HPE Flash Media Kits for USB Drives was removed from Additional
Options
Hot Plug SFF SAS maximum internal storage was increased to 2.4TB
Processor, Memory, Hard Drive, HPE iLO Advanced and HPE
InfiniBand Mezzanines product descriptions were revised
HPE Insight Control server deployment was removed from HPE
Insight Software
Processors, Memory, Converged Infrastructure Management
Software, and HPE InfiniBand Mezzanine Options were revised.
The link in the Note was corrected in the Standard Features/
Upgradeability section.
The Note in the Standard Features/ Upgradeability section was
updated.
The Processors and Memory sections were revised throughout the
QuickSpecs.
Added the following:
Support for HPE OneView Licenses
Support for HPE 600GB 6G SATA Value Endurance SFF 2.5-in SC
Enterprise Boot 3yr Wty Solid State Drive
Support for HPE 300GB 6G SATA Value Endurance SFF 2.5-in SC
Enterprise Boot 3yr Wty Solid State Drive
HPE Insight Software Management, High Performance Clusters,
Memory, HPE Networking, Hard Drives, and Storage Controllers were
revised.
HPE 2GB and 4GB Single Rack Unbuffered Memory and Storage
Controller product description were revised.
Additional Options: updated the HPE InfiniBand Mezzanines and HPE
Care Pack Services sections.
Optional Features: Updated Hyperlink in the HPE Proactive Insight
experience section.
Standard Features: Added Notes to At A Glance section.
Configuration Information - Factory Integrated Models: Added Notes
to Step 4
Page 42
HPE ProLiant BL420c Gen8 Server Blade
QuickSpecs
Summary of Changes
01-Mar-2013
25-Feb-2013
From Version 9 to 10
From Version 8 to 9
Removed
Added
Changed
Added
18-Jan-2013
From Version 7 to 8
05-Dec-2012
From Version 6 to 7
Changed
Added
Changed
19-Oct-2012
28-Sep-2012
From Version 5 to 6
From Version 4 to 5
Changed
Changed
24-Sep-2012
From Version 3 to 4
Changed
13-Aug-2012
From Version 2 to 3
Changed
20-Jul-2012
From Version 1 to 2
Changed
Removed Platinum reference from entire QS
Core Options: Added p/n 665246-B21
Changes made in the following sections:
Standard Features: Maximum Internal Storage, HPE Insight
management software, Models, Core Options: HPE Networking and
Hard Drives, Additional Options: HPE Insight software and Storage
What's New section
Added Step 3 to Configuration Information.
Memory descriptions were updated throughout the QuickSpecs.
Added Notes to the HPE I/O Accelerator Options section.
Changes made to the Standard Features, Configuration Information,
Options, Memory and Storage sections.
Change was made to SKU description in Additional Options section.
Changes were made in Standard Features and Additional Options
sections.
Changes were made in Standard Features, Optional Features and
Additional Options sections.
Changes made in Overview, Configuration Information, Core Options,
Additional Options and Memory sections.
Changes made in the Memory section only.
Sign up for updates
Rate this document
© Copyright 2015 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other
countries.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04128169 - 14324 - North America - V32 - 11-December-2015
Page 43