FLINTEC
...the right weigh
Type FT-03 Weight Indicator
The FT-03 Weight Indicator is a very accurate, versatile, general
purpose instrument.
The instrument is approved by Weights & Measures Authorities
for use in Accuracy Class III applications with up to 10000
increments (e) according to OIML R 76.
Alphanumeric LCD backlight display (13 mm).
Tactile 27 keys including Numeric/Alphanumeric Keyboard for
various functions (on/off, sum, piece counting, zero, tare, print
and other function activation keys).
Two set points are available.
Additional software for:
- First weight memory,
- Two codes input.
Tilt sense input (inhibits weighing when scale is tilted).
The stainless steel housing offers the ideal solution for
industrial applications.
Important Features
• Approved for 10000 increments.
• Single or dual scale interval.
• Internal resolution 550000 counts.
• Alphanumeric keyboard and display.
• Serial interface RS232C.
• Second communication port RS485A.
• Set points (2x) available.
• Alibi memory for 10000 records.
• Real time clock.
• Piece counting function.
• Set points (2x) available.
• Tilt sense input.
Options
• Analogue output, current or voltage.
• Second scale connection with function
Scale 1, Scale 2 or Scale 1+2.
E 63
01/02
1/2
Flintec, Inc.
usa@flintec.net
Flintec GmbH
germany@flintec.net
Flintec AB
sweden@flintec.net
www.flintec.net
FLINTEC
...the right weigh
FT-03 Specifications
ACCURACY
Accuracy Class
III
EU Type approved
10000 increments
DISPLAY AND KEYBOARD
Display
Alphanumeric LCD backlight display (13 mm)
Status annunciators
Motion, tare, net, minus sign, zero, piece counting mode
Keyboard
Tactile keyboard with 27 keys
Decimal point
Between any digit of the display
Weight display digits
6
A/D CONVERTER
Type
Sigma-Delta ratiometric with integral analogue and digital filters
Conversion rate
3 to 70 measurements per second
Minimum input per vsi
0.4 µV per interval legal for trade, 0.1 µV per interval non approved
Analogue input range
−0.25 mV/V to 4 mV/V (−1.25 mV to 20 mV)
Resolution
Internal 550000 counts, display 100000 per mV/V input
SCALE CALIBRATION AND FUNCTIONS
Calibration
Weighing functions
Alibi memory
Set Points
Tilt sense input
LINEARITY AND STABILITY
Linearity
Long term stability
Temperature coefficient
LOAD CELLS
Excitation
Number of load cells
Connection
COMMUNICATION
Port #1
Port #2**
POWER
Power requirements
ENVIRONMENT AND ENCLOSURE
EMC
Operating temperature
Storage temperature
Humidity
Enclosure
OPTIONS
* Analogue output
* Second scale connection
** Option for Port #2
Calibration may be performed by application of weights or by the mV/V value of the load cell
Auto zero maintenance, motion detection, auto-zero at power-up, zero, tare, gross, test
Alibi memory for 10000 records and real time clock
2 Set points, transistor output, optoisolated, 24 V DC, 100 mA
Inhibits weighing when scale is tilted
Within 0.002%
≤ 0.005% of full scale per year
Zero ≤ 2 ppm/°C (switched polarity), Span ≤ 2 ppm/°C
+5 V DC or +5 V DC switched polarity
Up to 30 load cells 1100 Ω
6 wire technique
RS232C, 2400 baud
RS485A half duplex, baudrate 2400 to 57600
Baudrate, data bits, parity and data output are progammable
(Continious output, remote printer, EDP and master-slave protocols)
85...260 V AC, 50/60 Hz, 10 VA
According to OIML R 76 and EN 45501 requirements
−10 °C to +40 °C legal for trade / −20 °C to +50 °C non approved
−10 °C to +70 °C
90% RH max, non condensing
Stainless steel, protection IP 65
Current or voltage, resolution 16 bit Full Scale
With function Scale 1, Scale 2 or Scale 1+2
RS232C instead of RS485A
* Note: These options cannot be combined, select either one or the other
Dimensions
305
252
62
152
168
* Note:
position of mounting holes (4x).
E 63
01/02
2/2
Additional space
required at back side
depending on
connectors used.
232*
Flintec, Inc.
usa@flintec.net
Flintec GmbH
germany@flintec.net
51*
Flintec AB
sweden@flintec.net
www.flintec.net