Instruction Manual

EN
Instruction Manual
Manufactorers original User Manual
For use with the original remote control, that cannot control the modified receiver.
Covering OneRemote types
30012002
30012012
Internet, DAB/DAB+ and FM Digital Radio with
Bluetooth Technology and Spotify and Multi-room features
Important Safety Instructions
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2. Do not block any ventilation openings of unit.
3. The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the unit.
4. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause
serious injury to the unit.
5. Please read Rating Labels at the back of unit for power input and other safety information.
6. This unit is intended to be used only with the power supply provided.
7. Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at any point where they exit from the unit.
8. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull
straight out from the outlet.
9. Repair or replace all electric service cords that have become frayed or otherwise damaged
immediately. Do not use a cord that shows cracks or abrasion damage along its length, the plug,
or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet unless
the blades can be fully inserted to prevent blade exposure.
11. During lightning or raining days, unplug the unit for additional protection during thunderstorms or
when the unit is not used for prolonged periods. This will prevent damage to the unit from
lightning and power surges.
12. Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you
may be exposed to dangerous voltage or other hazards. Any service work should be carried out
by qualified technicians.
13. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If
so, simply reset the product to resume normal operation by following the instruction manual. In
case the function could not resume, please use the product in other location.
14. The means of disconnecting this apparatus from the mains supply is plug of adapter. The
disconnect device shall remain readily operable.
15. The battery of remote control shall not be exposed to excessive heat such as sunshine, fire or
the like.
16. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
17. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit
switched on while unattended for long periods of time, e.g. overnight, while on holiday or while
out of the house. Switch it off and disconnect the mains plug from the mains socket.
2
Contents
Important Safety Instructions ................................................................................................... 2 Contents .................................................................................................................................. 3 Getting Started ......................................................................................................................... 5 Unit Views ............................................................................................................................ 6 Remote Control View ........................................................................................................... 7 Setup Wizard ........................................................................................................................... 8 Internet Radio mode .............................................................................................................. 10 ‘Local “Country”’ Stations ................................................................................................... 10 Selecting a station through ‘Stations’ ................................................................................. 10 Selecting a station through ‘Podcasts’ ............................................................................... 11 Getting Access Code and FAQ Solution ............................................................................ 11 Adding station to ‘My Favourites’ ....................................................................................... 12 Adding station to ‘My Added Stations’ ............................................................................... 12 View Station Information .................................................................................................... 12 Storing Preset Stations ...................................................................................................... 12 Recalling a Preset Station.................................................................................................. 12 Spotify Connect ..................................................................................................................... 13 Using Spotify Connect ....................................................................................................... 13 Controlling Spotify Connect ............................................................................................... 14 Using another Spotify account with your radio................................................................... 14 Music player Mode ................................................................................................................. 15 Setting up a Music Server .................................................................................................. 15 Sharing Media with Windows Media Player ....................................................................... 15 Playing Shared Media ........................................................................................................ 16 My Playlist .......................................................................................................................... 17 Repeat Play Mode ............................................................................................................. 17 Shuffle Play Mode .............................................................................................................. 17 Clearing My Playlist ........................................................................................................... 17 Prune Servers .................................................................................................................... 17 Now Playing Information .................................................................................................... 17 DAB Mode ............................................................................................................................. 18 Selecting DAB mode .......................................................................................................... 18 Selecting another Station ................................................................................................... 18 Secondary Service ............................................................................................................. 18 Scanning Stations .............................................................................................................. 18 Prune Invalid ...................................................................................................................... 19 3
DRC (Dynamic Range Control) value ................................................................................ 19 Changing Station Order ..................................................................................................... 19 Viewing Station Information ............................................................................................... 19 Storing Preset Stations ...................................................................................................... 20 Recalling a Preset Station.................................................................................................. 20 FM Mode ................................................................................................................................ 21 Selecting FM Mode ............................................................................................................ 21 Scan setting ....................................................................................................................... 21 Audio Settings .................................................................................................................... 21 Storing Preset Stations ...................................................................................................... 21 Recalling a Preset Station.................................................................................................. 22 Bluetooth Mode ...................................................................................................................... 23 General Operation ................................................................................................................. 24 Setting Sleep...................................................................................................................... 24 Setting Alarm ..................................................................................................................... 24 Setting Equaliser ................................................................................................................ 24 Network Setup ................................................................................................................... 25 Setting Time/Date .............................................................................................................. 25 Setting Language ............................................................................................................... 25 Factory Reset..................................................................................................................... 26 Software Update ................................................................................................................ 26 Setup Wizard ..................................................................................................................... 26 Viewing System Info .......................................................................................................... 26 Setting Backlight ................................................................................................................ 27 Multi-room .......................................................................................................................... 27 Specification .......................................................................................................................... 30 4
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
!
Main unit
!
Instruction manual
!
Remote control and AAA alkaline batteries
!
Power adapter
!
DAB/FM antenna
!
RCA cable
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
!
Where the radio will be exposed to direct sunlight.
!
Where the radio will be close to heat radiating sources.
!
Where the humidity is high and ventilation is poor.
!
Where it is dusty.
!
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Wireless LAN Setting
"
A broadband Internet connection.
"
A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
"
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
Internet Radio to communicate with the network.
"
If your wireless network is configured for trusted stations you will need to enter the Radio’s MAC
address into your wireless access point. To find the Radio’s MAC address use menu items as
follows: Main menu > System settings > Network > View settings > MAC address.
Before you continue, make sure that your wireless access point is powered up and connected to your
broadband Internet. To get this part of the system working, read the instruction supplied with the
wireless access point is highly recommended.
Adjusting the Antenna
Unwind the DAB/FM antenna and screw it to Antenna socket on the back of the unit to ensure you
receive the best reception possible in both DAB and FM radio modes. It may be necessary to adjust
the position of the radio and /or antenna to achieve the best signal.
Using Optical Cable
Connect a fiber-optical digital cable to Optical Out socket on the back of the unit will allow your radio
transmitting digital signal to audio equipment.
5
Using RCA Cable
Connect the 3.5 mm plug at the end of your RCA cable to the Audio Out socket on the back of this
unit. Then insert the Red and Black plugs at the other end of the RCA cable to your audio device.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the back of the unit. Then
insert the power adapter into the mains socket. Press
button on the unit or on the remote control to
turn unit on or standby. To switch the unit off completely, unplug the power adapter from the mains
socket.
Unit Views
1. Optical Out socket
To connect an Optical cable.
2. Audio Out socket
To connect a RCA cable.
3. DC IN socket
4. Antenna socket
5.
button
Press to switch radio on or standby.
6
Remote Control View
Replacing the batteries:
1.
button
Press to switch radio on or standby.
2.
OK button
Press to confirm your selection.
3.
buttons
Press to browse options.
4.
VOL +/- buttons
Press to adjust volume.
5.
MENU button
Press to display menu options.
6.
MODE button
Press to switch among Internet, Spotify, Music
player, DAB, FM and Bluetooth modes.
7.
INFO button
Press to view station information.
8.
MUTE button
Press to mute radio, press again to pick up
sound.
9.
SCAN button
Press to scan for DAB and FM stations.
10.
button
Press to skip to previous track in Music player
and Spotify mode.
Press and hold to rewind current track in Music
player and Spotify mode.
11.
button
Press to skip to next track in Music player and
Spotify mode.
Press and hold to fast forwards current track in
Music player and Spotify mode.
12.
button
Press to pause/play current track in Music
player and Spotify mode.
13.
Preset buttons 1-10
Press and hold to save a preset station.
Press to recall a saved preset station.
14.
SLEEP button
Press to set up sleep time.
15.
SNOOZE button
Press to active snooze function.
1. Open the battery compartment cover
on the back of your remote control.
2. Install two AAA new batteries referring
to the markings direction inside the
battery compartment.
# Note: do not reverse any battery
and do not mix battery types, also
do not mix old and new batteries.
When discard your old battery,
3.
please considering eco-friendly.
Cover the battery compartment door.
7
Setup Wizard
1.
For initial use, the display will show ‘Setup wizard’ screen.
2.
Press
or
button to confirm ‘YES' to start setup. Options in the setup wizard include the
following:
Date/Time
Set 12 or 24 hour format
Auto update
" Update from DAB
" Update from FM
" Update from Network
Select your time zone and daylight savings is needed.
" No update
Set the date and time is needed.
Keep network connected
Select YES or NO
3.
The Wizard will now scan your location for accessible wireless networks. When the scan has
finished, a list of networks will be displayed.
4.
Press
1)
or
button and then press OK button to select a wireless network you wanted.
If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code
and display the password entry screen as follows:
#
Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to
the network automatically.
8
a.
Press
buttons to cycle through the alphanumeric character list, press OK
button to select an appointed character.
#
b.
Note: WEP/WPA pass codes are case-sensitive.
If a wrong operation is being conducted, select
to delete designated
character.
#
Note:
= Backspace;
means return to previous track; radio will
automatically save the WEP/WPA you’ve input, so no bother to re-enter these
c.
codes.
After selecting the final character of your password, press
buttons to
, and then press OK button to confirm. The radio is connected to wireless
network.
2)
Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the list as
[WPS].
a.
If you wish to establish a connection via WPS, press OK button after you have selected
desired network. The radio then offers the option to initiate WPS.
b.
Press
or
button to select through PUSH Button, PIN and Enter Passkey, press OK
button to confirm.
Push Button
PIN
Enter Passkey
5.
You must start the WPS scan on the remote station (e.g. router).
Consult the manual for your router or Access Points (AP) to learn
how to do this.
After you have done this, press OK button on the radio and then
both devices will establish a connection.
The radio creates an 8-digit number, which you then have to enter
into the remote station.
After entering the PIN, press OK button to establish the
connection between both devices.
In addition to a WPS connection, you can also establish a
connection using a Pre-Shared-Key. The required key is often on
the rear of the router, or you may have defined it yourself.
This method is used automatically for networks without WPS. You
can call up the Pre-Shared-Key function on networks with WPS by
selecting menu item “Enter Passkey”.
An input field should now appear. You can enter the required key
(PSK) by pressing
buttons and press OK button, and
then select “OK” and press OK button complete the entry. The
radio should now establish the connection to the network.
Setup wizard completed, press OK button to exit.
9
Internet Radio mode
1.
The display will show 'Main menu' after 'Setup wizard' completed. Press OK button to select
Internet radio mode.
2.
While 'Station list' is highlighted, press OK button to confirm.
3.
Then refer following section to choice stations. Or if failed to connect to network, please follow:
a. Check your Router, see it working normally or not;
b. Relocate your radio to a stronger signal position is necessary!
c. Make sure your password is correct input.
‘Local “Country”’ Stations
Local "Country" will change according to your current location. It displays local programs of your
current location.
1.
To enter Local stations, press MENU button > Station list > Local "Country", press OK button
to confirm.
2.
Press
or
button to select options, and then press OK button to confirm.
3.
Step by step to the program you desired.
Selecting a station through ‘Stations’
1.
Press MENU button > Station list > Stations, press OK button to confirm.
2.
In 'Stations' menu:
" ‘Location’ enables you to choose from the radio stations provided by any country which you
choose from a list.
a)
10
While 'Location' is highlighted, press OK button to confirm.
b)
Press
or
button to select the region you wanted, and then press OK button to
confirm.
c)
Using the same method to choose country, station in turn, radio will now loading.
" ‘Genre’ enables you to choose radio stations according to their content, for example Classic
Rock, Sport, News, etc.
" ‘Search stations’ enables you to enter all or part of station name to find a station.
" ‘Popular stations’ enables your radio to list the stations that have the most listeners.
" ‘New stations’ enables your radio to list the stations that have recently joined the Internet
radio network.
#
Note: Some radio stations do not broadcast 24 hours per day, and some stations are not always
on-line.
Selecting a station through ‘Podcasts’
1.
Press MENU button > Station list > Podcasts, press OK button to confirm.
2.
Press
3.
Step by step to your purpose program.
or
button to select options, and then press OK button to confirm.
Getting Access Code and FAQ Solution
1.
To assess to this order, press MENU button > Station list > Help, press OK button to confirm.
2.
Press
or
button to select Get access code or FAQ, and then OK button to confirm
It uses for creating an account when registering your radio on portal
Get access code
www.wifiradio-frontier. com
Refer to section ‘Adding station to ‘My Favourites’’.
FAQ
Press
or
button to select question, and then press OK
button to listen the FAQ.
11
Adding station to ‘My Favourites’
1.
To register your radio with the portal: www.wifiradio-frontier.com
2.
Create account login, enter Access code is required. Access code can be found from “Station
list > Help > Get access code".
3.
You can add your favourite stations via the portal (www. wifiradio-frontier.com).
4.
After you added the stations, in order to have your radio access your new settings, get your radio
power off for several minutes is necessary.
5.
The added stations are accessible by selecting MENU > Station list > My favourites.
#
Note: Doing a ‘factory reset’ cannot erase ‘my favourites’ stations.
Adding station to ‘My Added Stations’
1.
Even though the Internet radio portal contains thousands of stations, you may want to listen to
stations not listed. You can add your own stations via the portal (www. wifiradio-frontier.com).
2.
After you added the stations, in order to have your radio access your new settings, get your radio
power off for several minutes is necessary.
3.
The added stations are accessible by selecting MENU > Station list > My added stations.
#
Note: Doing a ‘factory reset’ cannot erase ‘my added stations’’.
View Station Information
It is possible to view the information that is displaying on the second line of the display when listening
Internet program. To view more information, you can press INFO button repeatedly, the display will
show the information through Station Description, Genre, Country, Reliability, Bit rate, Codec,
Sampling Rate, Playback Buffer and Date Info.
Storing Preset Stations
Your radio can store up to 10 of your favourite Internet stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press and hold one of Preset buttons 1-10 until display shows
‘Preset stored’.
2. Preset number ‘
#’ will show on the display.
Recalling a Preset Station
1.
Press one of Preset buttons 1-10 to play the preset station.
2.
The display will show ‘Preset empty’ if the preset station isn’t allocated.
12
Spotify Connect
Spotify gives you millions of songs at your fingertips. The artists you love, the readymade playlists for
every mood and genre, the latest hits and new discoveries just for you.
With Spotify Connect feature, you can play and control all this music wirelessly. Choose music on
your smartphone or tablet, and listen on your radio.
*For service availability in your country, check www.spotify.com
Using Spotify Connect
Your radio has Spotify Connect built in. This lets you control the music playing on your radio using the
Spotify app on your smartphone or tablet.
Listening is seamless – you can take calls, play games, watch a video, even switch your phone off, all
without interrupting the music. It’s a better way to listen at home.
You’ll need a Spotify Premium account to use Spotify Connect. If you don’t have it, just go to
www.spotify.com/freetrial for your free 30-day trial.
1.
Download Spotify app for your smartphone or tablet (iOS or Android).
2.
Connect your radio to the same WiFi network as your smartphone or tablet, and then press
MODE button on the remote control repeatedly to select Spotify Connect mode.
3.
Open the Spotify app on your smartphone or tablet, and play any song.
4.
Tap the square image of the song’s cover art in the bottom left of the screen. Then tap the
Connect icon
5.
.
Tap ‘DigitRadio 110 IR’ from the list to select your radio. If you can’t see it, just check it’s
connected to the same wifi network as your smartphone of tablet.
You will notice that your radio is currently listed as
“DigitRadio 110 IR xxxxxxxxxxxx” (the 12 digit alphanumeric
code is the MAC address of your radio) in the Spotify App. If
you would like to change this name to something more
personal (‘John’s DigitRadio 110 IR’ for example), you can
do so as follows:
a.
On the radio: Press MENU and select Main menu >
System settings > Network > View settings. Scroll
down and take a note of the ‘IP address’.
b.
On your computer: Ensure that your computer is on the
same network as the radio, then enter the IP address
into your browser’s address bar (example:
192.168.0.34). This will allow you to view some of the
radio’s diagnostics, but also change its name.
6.
The Connect icon will turn green to signify that your radio is now selected and being used for
audio playback.
13
7.
Your Spotify app will only recognize your radio when the radio is connected to the internet (i.e. in
Internet Radio, Spotify Connect or Music player modes). To use Spotify when your radio is in
non-internet modes (i.e. in DAB, FM or Bluetooth mode) you need to select Main menu >
System settings > Network > Keep network connected > YES. This also allows you to wake
the radio from standby using your Spotify app.
#
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday or
while out of the house, select NO to save power is recommended.
Controlling Spotify Connect
You can now control Spotify from the app like normal; search for and play your tracks, change the
volume and add to playlists even though playback is through your radio. The next time you open the
Spotify app, playback will continue through your radio.
Spotify Connect is a cloud-based service, therefore after activation on your radio, your smartphone or
tablet no longer needs to be on the same WiFi network to control audio playback.
Using another Spotify account with your radio
Your Spotify account details are now stored on your radio. To overwrite this with another Spotify
account, simply follow the activation steps again whilst running the Spotify app using your desired
account. Please remember that both your smartphone or tablet and your radio need to be on the
same WiFi network for the overwriting to occur.
14
Music player Mode
Setting up a Music Server
In order for your radio play music files from a computer, the computer must be set up to share files or
media.
UPnP media sharing allows devices like this radio to play music from a shared media library,
navigating through tag menus such as Artist, Album or Genre.
If you are running a suitable server system such as a PC with Windows Media Player10 or later
(WMP), and your music library is well-tagged, then it is recommended to use media sharing.
Only the UPnP (Universal Plug and Play) server needs to be set up. (iTunes does not currently work as
a UPnP media server.)
Sharing Media with Windows Media Player
The most common UPnP server is Windows Media Player (10 or later. Viewing version from Help >
About Windows Media Player). Alternatively, other UPnP platforms and servers may be used. To
set up WMP for media sharing, perform the following steps:
1.
Ensure that the PC is connected to the network.
2.
Ensure that the radio is powered on and connected to the same network.
3.
In WMP, add to the media library the audio files and folders you want to share with your radio by
selecting Organize > Manage Libraries > Music / Videos / Pictures / Recorded TV, click Add
to add audio files and folders and then click OK to finish adding.
4.
In WMP, enable media sharing (Stream > More streaming options…).
15
5.
Make sure that the radio has access to the shared media by selecting it and clicking Allow. You
can also set a name for the shared media in the box of Name your media library. Click OK to
close the dialogue boxes.
6.
The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the
background; there is no need to start WMP explicitly.
Playing Shared Media
1.
2.
Press MODE button repeatedly to select Music player mode.
While 'Shared media' is highlighted, press OK button to confirm.
3.
Available media servers will be listed. Press
or
button to browse servers and press OK
button to confirm, and then step by step to your selecting music.
4.
When a track is playing, you can use remote control to:
a. Press
button to skip to previous track; press and hold
button to fast reverse current
playing track.
b. Press
button to play/pause current playing track.
c. Press
button to skip to next track; press and hold
button to fast forward current playing
track.
16
My Playlist
The My Playlist feature enables you to create a playlist of your favourite tracks from your music
libraries.
Once you have your playlist ready you can choose to play through the playlist on your radio and can
also set shuffle and repeat play functions while your playlist is playing.
To save a track to ‘My Playlist’, browse the track you want to add to the playlist, press and hold OK
button, then the track is added to the playlist.
To play 'My Playlist', press MENU button, and then press
or
button to select 'My playlist',
press OK button to confirm. Browse the track you want to play, press OK button to select.
Repeat Play Mode
Press MENU button, and then press
or
button to select 'Repeat play: Off', then press OK
button repeatedly to shift repeat play 'On' or 'Off'.
Shuffle Play Mode
Press MENU button, and then press
or
button to select 'Shuffle play: Off', then press OK
button repeatedly to shift repeat play 'On' or 'Off'.
Clearing My Playlist
You can use this feature to clear the contents of your playlist.
1.
Press MENU button, press
or
button to select 'Clear My playlist' and then press OK
button to confirm.
2.
Select 'YES' to clear my playlist.
Prune Servers
The Prune Servers feature enables you to remove music servers that are no longer available to you to
browse for music.
1. Press MENU button, press
or
button to select 'Prune servers' and then press OK button to
confirm.
2. Select ‘Yes’ to ‘Prune shared media wake on LAN servers’.
Now Playing Information
While a track is playing, the display shows the track and a progress bar with figures for elapsed and
total track time.
To view further information, press INFO button on the main unit repeatedly to show the information
through Artist, Album, Bit Rate, Codec, Sampling Rate, Playback buffer and Date on the display.
17
DAB Mode
Selecting DAB mode
1.
Press MODE button repeatedly to select DAB mode.
2.
For initial use, radio will carry out a full scan and store stations list in memory.
3.
Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order.
The first station in the list will be selected, press OK button to broadcast.
#
Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to
a stronger signal area.
Selecting another Station
1.
While a program is playing, press
or
button to display station list, and then press
or
button to select the stations you want to play. Press OK button to confirm.
2.
Alternatively, press MENU button and then press
or
button to select 'Station list', press
OK button to confirm. Step by step to select the station you want.
Secondary Service
You may see a “>>” symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are related to
the primary station. E.g. a sports station may want to add extra commentaries. The secondary
services are inserted directly after the primary station (a “<<” symbol is before the name of the station)
in the station list.
To select the secondary station, press
or
button until you find the secondary service you want,
then press OK button to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.
Scanning Stations
Simply press SCAN button to scan for all available stations.
Alternatively, press MENU button, press
full scan.
18
or
button to select ‘Scan’, and then press OK button to
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button, press
confirm.
2. Press
or
or
button to select 'Prune invalid', and then press OK button to
button to select ‘YES’, and then press OK button to confirm.
DRC (Dynamic Range Control) value
You can set the compression level of stations to eliminate the differences in dynamic range or sound
level between radio stations.
1. Press MENU button, press
2. Press
or
or
button to select 'DRC', and then press OK button to confirm.
button to select through 'DRC high', 'DRC low' or 'DRC off', press OK button to
confirm.
Changing Station Order
You may want to display the stations in different order.
1.
2.
Press MENU button, press
or
button to select 'Station order', and then press OK button to
confirm.
Press
or
button to select through 'Alphanumeric', 'Ensemble' or 'Valid', and then press OK
button to confirm your selecting option.
Alphanumeric
Ensemble
Valid
Display all stations in alphanumeric order.
List currently broadcasting active stations before inactive ones.
Remove inactive stations from the station list.
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button on the main unit repeatedly
to view information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal
Quality, Signal Strength, Bitrate, Codec, Channel and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show on
the display.
The indicator on the signal bar shows the
minimum acceptable signal level.
#
Note: Stations with signal strength
below the minimum signal level may
not provide a steady stream of audio.
19
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press and hold one of Preset buttons 1-10 until display shows
‘Preset stored’.
2. Preset number ‘
#’ will show on the display.
Recalling a Preset Station
1.
Press one of Preset buttons 1-10 to play the preset station.
2.
The display will show ‘Preset empty’ if the preset station isn’t allocated.
20
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the
last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, press
or
button to
change the frequency by 0.05MHz.
4. To automatically scan, while FM frequency shows up, press
or
button and then press the
SCAN button, your radio will skip forwards or backwards until it reached the next available station.
Scan setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss)
from weak stations.
1.
To change the scan settings to stop only at stations with good signal strength, press MENU
button, press
2.
or
button to select 'Scan setting', and then press OK button to confirm.
Display will show 'Strong stations only', press
or
button to select 'YES' and then press
OK button to confirm.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1.
To play weak stations in mono, press MENU button, press
or
button to select ‘Audio
setting’, and then press OK button to confirm.
2.
Display will show 'Listen in Mono only?' Press
or
button to select ‘YES’, and then press
OK button to confirm.
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations. This will enable you to access your
favourite stations quickly and easily.
1. While playing your favourite station, press and hold one of Preset buttons 1-10 until display shows
‘Preset stored’.
2. Preset number ‘
#’ will show on the display.
21
Recalling a Preset Station
1.
Press one of Preset buttons 1-10 to play the preset station.
2.
The display will show ‘Preset empty’ if the preset station isn’t allocated.
22
Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1.
Press the MODE button to select Bluetooth mode.
2.
The display will flash in
3.
Activate your Bluetooth device and select the search mode.
4.
‘DigitRadio 110 IR’ will appear on your Bluetooth device.
5.
Select ‘DigitRadio 110 IR’ and enter “0000” for the password if necessary.
6.
The
7.
While a track is playing, you can:
repeatedly.
icon will remains steadily on the display when connection is successful.
a. Press
button once to resume to the beginning of track, and then press
again to skip to previous track; press and hold
button once
button to fast reverse current playing track.
b. Press
button to pause or play current playing track.
c. Press
button to skip to next track; press and hold
button to fast forward current playing
track.
8.
To disconnect the Bluetooth connection, press MENU button on the unit, Press
or
button to
select ‘BT disconnect’, and then press OK button to confirm. The display will show ‘Device
disconnect?’, Press
or
button to select ‘YES’, and then press OK button to confirm.
23
General Operation
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1.
Press MENU button > Main menu > Sleep, and then press OK button to confirm.
2.
Press
or
button to view options Sleep OFF, 15, 30, 45 or 60 minutes, press the OK button
to confirm. The sleep icon
3.
To turn the sleep function off while the sleep timer is still counting down, select 'Sleep' option,
press
4.
and sleep time will show on the display.
or
button to select 'Sleep OFF'.
Alternatively, press SLEEP button repeatedly to set sleep time.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1.
Press MENU button > Main menu > Alarms, and then press OK button to confirm.
2.
Press
or
button to select ‘Alarm 1’ or ‘Alarm 2’, and then press OK button to confirm.
3.
Press
or
button to select options, and then press OK button to confirm the setting.
Enable:
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Time:
Alarm date: DD-MM-YYYY (only available when alarm repeat is set to
‘Once’)
Alarm time: HH:MM
Mode:
Alarm mode: Buzzer, Internet radio, DAB or FM
Last listened or saved preset station (not available for Buzzer
mode).
Preset:
4.
Volume:
Alarm volume
Save:
Save the alarm
When the display shows 'Alarm Saved', the alarm setting is successful.
or
will show on
the display.
5.
To temporarily switch off alarm, press SNOOZE button to activate Snooze function when the
alarm is sounding. Press SNOOZE button repeatedly can set Snooze time of 5, 10, 15 or 30
minutes in turn. The set snooze time will show on the display.
6.
To turn off alarm, press
button when the alarm is sounding.
7.
To cancel Alarm, refer to steps1-3 to enable alarm ‘Off’.
Setting Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization setting will
change the tone of the sound from your radio when selected.
1.
Press MENU button > Main menu > System settings > Equaliser, and then press OK button to
confirm.
2.
Press
or
button to select through Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News, My
EQ or My EQ profile setup, and then press OK button to confirm.
24
3.
To set up My EQ, select 'My EQ profile setup', and then press OK button to confirm. Press
or
button to select Bass or Treble, and then press OK button to confirm. Press
or
button to change the value of Bass or Treble, and then press OK button to confirm. Press
button, display will show ‘Save changes’. Press
or
button to select ‘YES’ and then press
OK button to save changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing network
problems.
1. Press MENU button > Main menu > System settings > Network, press OK button to confirm.
2. Press
or
button to select your preferred network setting option:
Network wizard:
Scan for available networks
Set up a WPS encrypted network (only support the
router uses WPS 2.0)
View network settings such as MAC address, Wlan
region, IP address etc.
PBC Wlan setup:
View settings.:
Manual settings:
Set wireless connection
NetRemote PIN setup
Set a Net Remote Pin code
Network profile:
List of registered networks or delete some of unwanted
networks
Clear network settings:
Keep network connected:
Clear current network settings
Keep network connected in non-internet mode such as
DAB, FM, Bluetooth, Aux in and standby modes
3. Press OK button to confirm your setting.
Setting Time/Date
1.
Press MENU button > Main menu > System settings > Time/Date, press OK button to confirm.
2.
Press
or
button to select options, and then press OK button to confirm the setting.
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from DAB’, ‘Update from FM’, ‘Update from
Network’ or ‘No update’
Set format:
12 or 24 hour format
Select a timezone
(Only available when auto update from Network.)
Daylight saving settings
Daylight saving:
(Only available when auto update from Network.)
Then setting time according to your personal preference.
Set timezone:
3.
Setting Language
This feature enables you to change menu language. The default menu language is German.
1. Press MENU button > Main menu > System settings > Language, press OK button to confirm.
2. Press
or
button to select your language, and then press OK button to confirm.
25
Factory Reset
A factory reset resets all user settings to default values, so time/date and presets are lost.
1. Press MENU button > Main menu > System settings > Factory Reset, press OK button to
confirm.
2. Press
or
button to select ‘YES’, and then press OK button to confirm.
Software Update
From time to time, your radio may make software upgrades available with bug fixes and/or additional
features.
If your radio detects that newer software is available, it will ask if you want to go ahead with an update.
If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
C A U T I O N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
1. Press MENU button > Main menu > System settings > Software update, press OK button to
confirm.
2. Press
or
button to select 'Auto-check setting', your radio will check periodically for new
version software.
3. Press
or
button to select 'Check now', your radio will now to check new version software
and automatically upgrade the detected new version software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
1.
2.
Press MENU button > Main menu > System settings > Setup wizard, press OK button to
confirm.
Press or
button to select 'YES', and then press OK button to confirm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press OK button to confirm.
2. Press
26
or
button to view 'SW version', 'Spotify version', 'Radio ID' and 'Friendly Name'.
Setting Backlight
1.
Press MENU button > Main menu > System settings > Backlight, press OK button to confirm.
2.
Press
or
button to select ‘Power-on Level' or 'Standby Level', then press OK button to
or
button to select backlight level, and then press OK button to confirm the setting.
confirm.
3.
Press
Power-on Level
"
"
"
Standby Level
"
"
"
High
Medium
Low
High
Medium
Low
Multi-room
Multi-room is a feature that enables you control your radio (one or group) via UNDOK App for
playback.
You can enjoy music by using your smartphone which has UNDOK App to control the radios (multiroom capable devices) in the kitchen, bedroom or living room. Of course you also can control the
radios playing together.
1.
To use multi-room feature, download UNDOK
app from App Store for your iOS
smartphone or download from Google Play for your Android smartphone.
2.
Start UNDOK app, making sure your radio and smartphone are connected to same WiFi network.
3.
All available devices will be listed. Tap your radio “DigitRaio 110 IR xxxxxxxxxxxx” (the 12 digit
alphanumeric code is the MAC address of your radio) to connect to.
4.
Now playing screen is shown. (Playing Internet radio mode for example.)
5.
Multi-room capable devices can be connected to play synchronously if they are added to a group.
27
6.
Edit group through App, taping ‘Edit’ at the right-top corner on device list.
a. Tap ‘+ Create Group’ at the bottom on device list to create a new group and then enter a
group name or select one usual name from the list, and then select ‘Create’.
b. As many new groups can be created as needed. The new empty groups are shown at the top
of the list. Hold down the three horizontal line and then drag your radio into group.
#
Note: some modes are not supported when grouping your radio. If your radio is in
mode DAB, FM or Bluetooth you cannot move it into the selected group.
c. If your radio is a client in the group, the radio display will show “Waiting for synchronisation”
and then the radio will play the same program as master device playing.
d. Tap ‘Close’ at top-right corner on editing screen to leave editing. (Refer to Figure 1.)
e. The devices in the group will be listed below group name. Tap on group name to select the
group.
f. Group will synchronously play the program which the master device is playing. You can drag
the volume control bar to change the master volume for all grouped devices. You also can tap
on the volume control and then change volume for each device respectively. (Refer to Figures
2 and 3.)
#
Note: when select playing mode, the standalone modes (DAB, FM or Bluetooth) are
incompatible for grouped devices, if you select these modes, the master device will be
removed from group.
Figure 1
28
Figure 2
Figure 3
7.
Alternatively, you can edit group through your radio.
a. Press MENU button > Main menu > System settings > Multi-room, and then press OK
button to confirm.
b. Press
or
button to select options, and then press OK button to confirm.
View details
Create new group
Add to group
List current clients
8.
View your radio state (Ungrouped, Server or Client) and the
group which it belong to.
Create a new group that your radio will be joined.
Devices in current network will be listed. Select the client you
desired to add to the group which your radio belong to.
Clients in the group which your radio belong to will be listed.
Select the client you want to remove from group.
Leave group
Remove your radio from group
Dissolve group
Dissolve the group which your radio belong to.
To ensure you can use UNDOK app when your radio is in all modes especially in non-internet
modes (i.e. in DAB, FM or Bluetooth mode) you need to select Main menu > System settings >
Network > Keep network connected > YES. This also allows you to wake the radio from
standby using your UNDOK app.
#
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday or
while out of the house, select NO to save power is recommended.
29
Specification
ITEMS
Specifications:
Power Supply:
Frequency Ranges:
DESCRIPTION
Internet, DAB/DAB+ and FM Digital Radio with Bluetooth Technology and
Spotify and Multi[room features
AC Input: 100-240V~, 50-60Hz
DC Output: 6V, 500mA
FM: 87.5-108MHz
DAB/DAB+: 174.928 – 239.200 MHz
Power Consumption:
3W (Max)
Dimension (L x W x H):
130mm x 42mm x 95mm
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end
of its life separately from your household waste. For more
information, please contact the local authority or your retailer
where you purchased the product.
30