DM - yoda communications, inc.

Giga PoE Plus Splitter
802.3at/af Compliant, Gigabit PS-103AG
Product Overview
The Gigabit Power over Ethernet Splitter (PS103AG) splits a networked PoE signal into
separated power and Gigabit data sources. This device allows administrators to run
Gigabit speed PoE cables over long distances and then split the PoE signal into
separated data and power sources in order to network non-PoE devices.
Save installation and equipment cost when installing access points, IP cameras and
more in remote locations. No need to install network devices near a power outlet. This
compact device safeguards valuable network equipment with short circuit protection and
quickly creates an integrated PoE and non PoE network at Gigabit speeds.
Network devices at Gigabit speeds all within a compact device
Automatically detects PoE terminals and supplies inline power
Easily install non-PoE devices where a power outlet is not available
Reduce installation and network equipment costs
Safeguards network device with short circuit protection
Adjustable output DIP switch for 5V, 9V, and 12V adjustable output
Converts Non-PoE devices with Power Over Ethernet Support
Auto-sensing power drawn from 802.3at/af power source equipment(PSE) devices
Supplies power up to 24 watts
Light weight and compact size
Ordering Information
Part Number
10/100/1000M GbE, IEEE802.3at/af
Data Rate
10/100/1000 Mbps
Input Power Requirement 1/2(+),3/6 (–) or 4/5(+),7/8(-)
Input Power Voltage
PS-103AG: 48Vdc/0.6A
Output Power
PS-103AG: 5V(4.5A),9V(2.5A),12V(2A)
Jumper Cable
DC 5.5*2.5*12 mm (White) / 5.5*2.1*12 mm (Blue) / 4.8*1.7*12 mm
(Yellow)/3.5*1.3*12(Red)mm, (L-300mm)
92 mm x 60 mm x 27 mm
Diagnostic LEDs
DC Power (Green)
Environmental Conditions
Operating Temperature
0 to 45℃
IEEE 802.3at/af, Compliance RoHS Compliant , CE
Safety Approvals
CE,FCC,EN 60950:2006
Yoda Communications, Inc.
2F, No. 3-1, Industry East Road IX, Science Based Industrial Park, HsinChu, Taiwan